diff options
Diffstat (limited to 'arch/ppc64/oprofile/op_model_rs64.c')
| -rw-r--r-- | arch/ppc64/oprofile/op_model_rs64.c | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/ppc64/oprofile/op_model_rs64.c deleted file mode 100644 index e010b85996e8..000000000000 --- a/arch/ppc64/oprofile/op_model_rs64.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/ptrace.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/oprofile_impl.h> - -#define dbg(args...) - -static void ctrl_write(unsigned int i, unsigned int val) -{ - unsigned int tmp = 0; - unsigned long shift = 0, mask = 0; - - dbg("ctrl_write %d %x\n", i, val); - - switch(i) { - case 0: - tmp = mfspr(SPRN_MMCR0); - shift = 6; - mask = 0x7F; - break; - case 1: - tmp = mfspr(SPRN_MMCR0); - shift = 0; - mask = 0x3F; - break; - case 2: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 4; - mask = 0x1F; - break; - case 3: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 9; - mask = 0x1F; - break; - case 4: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 14; - mask = 0x1F; - break; - case 5: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 19; - mask = 0x1F; - break; - case 6: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 24; - mask = 0x1F; - break; - case 7: - tmp = mfspr(SPRN_MMCR1); - shift = 31 - 28; - mask = 0xF; - break; - } - - tmp = tmp & ~(mask << shift); - tmp |= val << shift; - - switch(i) { - case 0: - case 1: - mtspr(SPRN_MMCR0, tmp); - break; - default: - mtspr(SPRN_MMCR1, tmp); - } - - dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0), - mfspr(SPRN_MMCR1)); -} - -static unsigned long reset_value[OP_MAX_COUNTER]; - -static int num_counters; - -static void rs64_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, - int num_ctrs) -{ - int i; - - num_counters = num_ctrs; - - for (i = 0; i < num_counters; ++i) - reset_value[i] = 0x80000000UL - ctr[i].count; - - /* XXX setup user and kernel profiling */ -} - -static void rs64_cpu_setup(void *unused) -{ - unsigned int mmcr0; - - /* reset MMCR0 and set the freeze bit */ - mmcr0 = MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - /* reset MMCR1, MMCRA */ - mtspr(SPRN_MMCR1, 0); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - mtspr(SPRN_MMCRA, 0); - - mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; - /* Only applies to POWER3, but should be safe on RS64 */ - mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR0)); - dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), - mfspr(SPRN_MMCR1)); -} - -static void rs64_start(struct op_counter_config *ctr) -{ - int i; - unsigned int mmcr0; - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); - ctrl_write(i, ctr[i].event); - } else { - ctr_write(i, 0); - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this excetion, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); -} - -static void rs64_stop(void) -{ - unsigned int mmcr0; - - /* freeze counters */ - mmcr0 = mfspr(SPRN_MMCR0); - mmcr0 |= MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); - - dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); - - mb(); -} - -static void rs64_handle_interrupt(struct pt_regs *regs, - struct op_counter_config *ctr) -{ - unsigned int mmcr0; - int val; - int i; - unsigned long pc = mfspr(SPRN_SIAR); - int is_kernel = (pc >= KERNELBASE); - - /* set the PMM bit (see comment below) */ - mtmsrd(mfmsr() | MSR_PMM); - - for (i = 0; i < num_counters; ++i) { - val = ctr_read(i); - if (val < 0) { - if (ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); - ctr_write(i, reset_value[i]); - } else { - ctr_write(i, 0); - } - } - } - - mmcr0 = mfspr(SPRN_MMCR0); - - /* reset the perfmon trigger */ - mmcr0 |= MMCR0_PMXE; - - /* - * now clear the freeze bit, counting will not start until we - * rfid from this exception, because only at that point will - * the PMM bit be cleared - */ - mmcr0 &= ~MMCR0_FC; - mtspr(SPRN_MMCR0, mmcr0); -} - -struct op_powerpc_model op_model_rs64 = { - .reg_setup = rs64_reg_setup, - .cpu_setup = rs64_cpu_setup, - .start = rs64_start, - .stop = rs64_stop, - .handle_interrupt = rs64_handle_interrupt, -}; |
