diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/boot/dts/p1022ds.dtsi | 16 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/p1022_ds.c | 106 |
2 files changed, 93 insertions, 29 deletions
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi index 28c36377f9b9..c3344b04d8ff 100644 --- a/arch/powerpc/boot/dts/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -33,22 +33,6 @@ */ &board_lbc { - /* - * This node is used to access the pixis via "indirect" mode, - * which is done by writing the pixis register index to chip - * select 0 and the value to/from chip select 1. Indirect - * mode is the only way to access the pixis when DIU video - * is enabled. Note that this assumes that the first column - * of the 'ranges' property above is the chip select number. - */ - board-control@0,0 { - compatible = "fsl,p1022ds-indirect-pixis"; - reg = <0x0 0x0 1 /* CS0 */ - 0x1 0x0 1>; /* CS1 */ - interrupt-parent = <&mpic>; - interrupts = <8 0 0 0>; - }; - nor@0,0 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 74e310b4b460..b4437ca3d2c4 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -27,6 +27,7 @@ #include <sysdev/fsl_pci.h> #include <asm/udbg.h> #include <asm/fsl_guts.h> +#include <asm/fsl_lbc.h> #include "smp.h" #include "mpc85xx.h" @@ -142,17 +143,73 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, { } +struct fsl_law { + u32 lawbar; + u32 reserved1; + u32 lawar; + u32 reserved[5]; +}; + +#define LAWBAR_MASK 0x00F00000 +#define LAWBAR_SHIFT 12 + +#define LAWAR_EN 0x80000000 +#define LAWAR_TGT_MASK 0x01F00000 +#define LAW_TRGT_IF_LBC (0x04 << 20) + +#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK) +#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC) + +#define BR_BA 0xFFFF8000 + +/* + * Map a BRx value to a physical address + * + * The localbus BRx registers only store the lower 32 bits of the address. To + * obtain the upper four bits, we need to scan the LAW table. The entry which + * maps to the localbus will contain the upper four bits. + */ +static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br) +{ +#ifndef CONFIG_PHYS_64BIT + /* + * If we only have 32-bit addressing, then the BRx address *is* the + * physical address. + */ + return br & BR_BA; +#else + const struct fsl_law *law = ecm + 0xc08; + unsigned int i; + + for (i = 0; i < count; i++) { + u64 lawbar = in_be32(&law[i].lawbar); + u32 lawar = in_be32(&law[i].lawar); + + if ((lawar & LAWAR_MASK) == LAWAR_MATCH) + /* Extract the upper four bits */ + return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12); + } + + return 0; +#endif +} + /** * p1022ds_set_monitor_port: switch the output to a different monitor port - * */ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { struct device_node *guts_node; - struct device_node *indirect_node = NULL; + struct device_node *lbc_node = NULL; + struct device_node *law_node = NULL; struct ccsr_guts __iomem *guts; + struct fsl_lbc_regs *lbc = NULL; + void *ecm = NULL; u8 __iomem *lbc_lcs0_ba = NULL; u8 __iomem *lbc_lcs1_ba = NULL; + phys_addr_t cs0_addr, cs1_addr; + const __be32 *iprop; + unsigned int num_laws; u8 b; /* Map the global utilities registers. */ @@ -168,25 +225,43 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } - indirect_node = of_find_compatible_node(NULL, NULL, - "fsl,p1022ds-indirect-pixis"); - if (!indirect_node) { - pr_err("p1022ds: missing pixis indirect mode node\n"); + lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc"); + if (!lbc_node) { + pr_err("p1022ds: missing localbus node\n"); goto exit; } - lbc_lcs0_ba = of_iomap(indirect_node, 0); - if (!lbc_lcs0_ba) { - pr_err("p1022ds: could not map localbus chip select 0\n"); + lbc = of_iomap(lbc_node, 0); + if (!lbc) { + pr_err("p1022ds: could not map localbus node\n"); goto exit; } - lbc_lcs1_ba = of_iomap(indirect_node, 1); - if (!lbc_lcs1_ba) { - pr_err("p1022ds: could not map localbus chip select 1\n"); + law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law"); + if (!law_node) { + pr_err("p1022ds: missing local access window node\n"); goto exit; } + ecm = of_iomap(law_node, 0); + if (!ecm) { + pr_err("p1022ds: could not map local access window node\n"); + goto exit; + } + + iprop = of_get_property(law_node, "fsl,num-laws", 0); + if (!iprop) { + pr_err("p1022ds: LAW node is missing fsl,num-laws property\n"); + goto exit; + } + num_laws = be32_to_cpup(iprop); + + cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br)); + cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br)); + + lbc_lcs0_ba = ioremap(cs0_addr, 1); + lbc_lcs1_ba = ioremap(cs1_addr, 1); + /* Make sure we're in indirect mode first. */ if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) != PMUXCR_ELBCDIU_DIU) { @@ -254,10 +329,15 @@ exit: iounmap(lbc_lcs1_ba); if (lbc_lcs0_ba) iounmap(lbc_lcs0_ba); + if (lbc) + iounmap(lbc); + if (ecm) + iounmap(ecm); if (guts) iounmap(guts); - of_node_put(indirect_node); + of_node_put(law_node); + of_node_put(lbc_node); of_node_put(guts_node); } |