diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/eeh-ioda.c')
| -rw-r--r-- | arch/powerpc/platforms/powernv/eeh-ioda.c | 916 |
1 files changed, 916 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c new file mode 100644 index 000000000000..0cd1c4a71755 --- /dev/null +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -0,0 +1,916 @@ +/* + * The file intends to implement the functions needed by EEH, which is + * built on IODA compliant chip. Actually, lots of functions related + * to EEH would be built based on the OPAL APIs. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bootmem.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/msi.h> +#include <linux/notifier.h> +#include <linux/pci.h> +#include <linux/string.h> + +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/io.h> +#include <asm/iommu.h> +#include <asm/msi_bitmap.h> +#include <asm/opal.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> +#include <asm/tce.h> + +#include "powernv.h" +#include "pci.h" + +/* Debugging option */ +#ifdef IODA_EEH_DBG_ON +#define IODA_EEH_DBG(args...) pr_info(args) +#else +#define IODA_EEH_DBG(args...) +#endif + +static char *hub_diag = NULL; +static int ioda_eeh_nb_init = 0; + +static int ioda_eeh_event(struct notifier_block *nb, + unsigned long events, void *change) +{ + uint64_t changed_evts = (uint64_t)change; + + /* We simply send special EEH event */ + if ((changed_evts & OPAL_EVENT_PCI_ERROR) && + (events & OPAL_EVENT_PCI_ERROR)) + eeh_send_failure_event(NULL); + + return 0; +} + +static struct notifier_block ioda_eeh_nb = { + .notifier_call = ioda_eeh_event, + .next = NULL, + .priority = 0 +}; + +#ifdef CONFIG_DEBUG_FS +static int ioda_eeh_dbgfs_set(void *data, u64 val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + out_be64(phb->regs + 0xD10, val); + return 0; +} + +static int ioda_eeh_dbgfs_get(void *data, u64 *val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + *val = in_be64(phb->regs + 0xD10); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_dbgfs_ops, ioda_eeh_dbgfs_get, + ioda_eeh_dbgfs_set, "0x%llx\n"); +#endif /* CONFIG_DEBUG_FS */ + +/** + * ioda_eeh_post_init - Chip dependent post initialization + * @hose: PCI controller + * + * The function will be called after eeh PEs and devices + * have been built. That means the EEH is ready to supply + * service with I/O cache. + */ +static int ioda_eeh_post_init(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + int ret; + + /* Register OPAL event notifier */ + if (!ioda_eeh_nb_init) { + ret = opal_notifier_register(&ioda_eeh_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + + ioda_eeh_nb_init = 1; + } + + /* FIXME: Enable it for PHB3 later */ + if (phb->type == PNV_PHB_IODA1) { + if (!hub_diag) { + hub_diag = (char *)__get_free_page(GFP_KERNEL | + __GFP_ZERO); + if (!hub_diag) { + pr_err("%s: Out of memory !\n", + __func__); + return -ENOMEM; + } + } + +#ifdef CONFIG_DEBUG_FS + if (phb->dbgfs) + debugfs_create_file("err_injct", 0600, + phb->dbgfs, hose, + &ioda_eeh_dbgfs_ops); +#endif + + phb->eeh_state |= PNV_EEH_STATE_ENABLED; + } + + return 0; +} + +/** + * ioda_eeh_set_option - Set EEH operation or I/O setting + * @pe: EEH PE + * @option: options + * + * Enable or disable EEH option for the indicated PE. The + * function also can be used to enable I/O or DMA for the + * PE. + */ +static int ioda_eeh_set_option(struct eeh_pe *pe, int option) +{ + s64 ret; + u32 pe_no; + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + + /* Check on PE number */ + if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { + pr_err("%s: PE address %x out of range [0, %x] " + "on PHB#%x\n", + __func__, pe->addr, phb->ioda.total_pe, + hose->global_number); + return -EINVAL; + } + + pe_no = pe->addr; + switch (option) { + case EEH_OPT_DISABLE: + ret = -EEXIST; + break; + case EEH_OPT_ENABLE: + ret = 0; + break; + case EEH_OPT_THAW_MMIO: + ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO); + if (ret) { + pr_warning("%s: Failed to enable MMIO for " + "PHB#%x-PE#%x, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + break; + case EEH_OPT_THAW_DMA: + ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, + OPAL_EEH_ACTION_CLEAR_FREEZE_DMA); + if (ret) { + pr_warning("%s: Failed to enable DMA for " + "PHB#%x-PE#%x, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + break; + default: + pr_warning("%s: Invalid option %d\n", __func__, option); + return -EINVAL; + } + + return ret; +} + +/** + * ioda_eeh_get_state - Retrieve the state of PE + * @pe: EEH PE + * + * The PE's state should be retrieved from the PEEV, PEST + * IODA tables. Since the OPAL has exported the function + * to do it, it'd better to use that. + */ +static int ioda_eeh_get_state(struct eeh_pe *pe) +{ + s64 ret = 0; + u8 fstate; + u16 pcierr; + u32 pe_no; + int result; + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + + /* + * Sanity check on PE address. The PHB PE address should + * be zero. + */ + if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) { + pr_err("%s: PE address %x out of range [0, %x] " + "on PHB#%x\n", + __func__, pe->addr, phb->ioda.total_pe, + hose->global_number); + return EEH_STATE_NOT_SUPPORT; + } + + /* Retrieve PE status through OPAL */ + pe_no = pe->addr; + ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, + &fstate, &pcierr, NULL); + if (ret) { + pr_err("%s: Failed to get EEH status on " + "PHB#%x-PE#%x\n, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return EEH_STATE_NOT_SUPPORT; + } + + /* Check PHB status */ + if (pe->type & EEH_PE_PHB) { + result = 0; + result &= ~EEH_STATE_RESET_ACTIVE; + + if (pcierr != OPAL_EEH_PHB_ERROR) { + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + result |= EEH_STATE_DMA_ENABLED; + } + + return result; + } + + /* Parse result out */ + result = 0; + switch (fstate) { + case OPAL_EEH_STOPPED_NOT_FROZEN: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + result |= EEH_STATE_DMA_ENABLED; + break; + case OPAL_EEH_STOPPED_MMIO_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_DMA_ENABLED; + break; + case OPAL_EEH_STOPPED_DMA_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + break; + case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE: + result &= ~EEH_STATE_RESET_ACTIVE; + break; + case OPAL_EEH_STOPPED_RESET: + result |= EEH_STATE_RESET_ACTIVE; + break; + case OPAL_EEH_STOPPED_TEMP_UNAVAIL: + result |= EEH_STATE_UNAVAILABLE; + break; + case OPAL_EEH_STOPPED_PERM_UNAVAIL: + result |= EEH_STATE_NOT_SUPPORT; + break; + default: + pr_warning("%s: Unexpected EEH status 0x%x " + "on PHB#%x-PE#%x\n", + __func__, fstate, hose->global_number, pe_no); + } + + return result; +} + +static int ioda_eeh_pe_clear(struct eeh_pe *pe) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + u32 pe_no; + u8 fstate; + u16 pcierr; + s64 ret; + + pe_no = pe->addr; + hose = pe->phb; + phb = pe->phb->private_data; + + /* Clear the EEH error on the PE */ + ret = opal_pci_eeh_freeze_clear(phb->opal_id, + pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + if (ret) { + pr_err("%s: Failed to clear EEH error for " + "PHB#%x-PE#%x, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + /* + * Read the PE state back and verify that the frozen + * state has been removed. + */ + ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, + &fstate, &pcierr, NULL); + if (ret) { + pr_err("%s: Failed to get EEH status on " + "PHB#%x-PE#%x\n, err=%lld\n", + __func__, hose->global_number, pe_no, ret); + return -EIO; + } + + if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) { + pr_err("%s: Frozen state not cleared on " + "PHB#%x-PE#%x, sts=%x\n", + __func__, hose->global_number, pe_no, fstate); + return -EIO; + } + + return 0; +} + +static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) +{ + s64 rc = OPAL_HARDWARE; + + while (1) { + rc = opal_pci_poll(phb->opal_id); + if (rc <= 0) + break; + + msleep(rc); + } + + return rc; +} + +static int ioda_eeh_phb_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* Issue PHB complete reset request */ + if (option == EEH_RESET_FUNDAMENTAL || + option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_PHB_COMPLETE, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_PHB_COMPLETE, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* + * Poll state of the PHB until the request is done + * successfully. + */ + rc = ioda_eeh_phb_poll(phb); +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int ioda_eeh_root_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_SUCCESS; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* + * During the reset deassert time, we needn't care + * the reset scope because the firmware does nothing + * for fundamental or hot reset during deassert phase. + */ + if (option == EEH_RESET_FUNDAMENTAL) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_FUNDAMENTAL_RESET, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_HOT_RESET, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_PCI_HOT_RESET, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* Poll state of the PHB until the request is done */ + rc = ioda_eeh_phb_poll(phb); +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int ioda_eeh_bridge_reset(struct pci_controller *hose, + struct pci_dev *dev, int option) +{ + u16 ctrl; + + pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n", + __func__, hose->global_number, dev->bus->number, + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option); + + switch (option) { + case EEH_RESET_FUNDAMENTAL: + case EEH_RESET_HOT: + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + break; + case EEH_RESET_DEACTIVATE: + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + break; + } + + return 0; +} + +/** + * ioda_eeh_reset - Reset the indicated PE + * @pe: EEH PE + * @option: reset option + * + * Do reset on the indicated PE. For PCI bus sensitive PE, + * we need to reset the parent p2p bridge. The PHB has to + * be reinitialized if the p2p bridge is root bridge. For + * PCI device sensitive PE, we will try to reset the device + * through FLR. For now, we don't have OPAL APIs to do HARD + * reset yet, so all reset would be SOFT (HOT) reset. + */ +static int ioda_eeh_reset(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct eeh_dev *edev; + struct pci_dev *dev; + int ret; + + /* + * Anyway, we have to clear the problematic state for the + * corresponding PE. However, we needn't do it if the PE + * is PHB associated. That means the PHB is having fatal + * errors and it needs reset. Further more, the AIB interface + * isn't reliable any more. + */ + if (!(pe->type & EEH_PE_PHB) && + (option == EEH_RESET_HOT || + option == EEH_RESET_FUNDAMENTAL)) { + ret = ioda_eeh_pe_clear(pe); + if (ret) + return -EIO; + } + + /* + * The rules applied to reset, either fundamental or hot reset: + * + * We always reset the direct upstream bridge of the PE. If the + * direct upstream bridge isn't root bridge, we always take hot + * reset no matter what option (fundamental or hot) is. Otherwise, + * we should do the reset according to the required option. + */ + if (pe->type & EEH_PE_PHB) { + ret = ioda_eeh_phb_reset(hose, option); + } else { + if (pe->type & EEH_PE_DEVICE) { + /* + * If it's device PE, we didn't refer to the parent + * PCI bus yet. So we have to figure it out indirectly. + */ + edev = list_first_entry(&pe->edevs, + struct eeh_dev, list); + dev = eeh_dev_to_pci_dev(edev); + dev = dev->bus->self; + } else { + /* + * If it's bus PE, the parent PCI bus is already there + * and just pick it up. + */ + dev = pe->bus->self; + } + + /* + * Do reset based on the fact that the direct upstream bridge + * is root bridge (port) or not. + */ + if (dev->bus->number == 0) + ret = ioda_eeh_root_reset(hose, option); + else + ret = ioda_eeh_bridge_reset(hose, dev, option); + } + + return ret; +} + +/** + * ioda_eeh_get_log - Retrieve error log + * @pe: EEH PE + * @severity: Severity level of the log + * @drv_log: buffer to store the log + * @len: space of the log buffer + * + * The function is used to retrieve error log from P7IOC. + */ +static int ioda_eeh_get_log(struct eeh_pe *pe, int severity, + char *drv_log, unsigned long len) +{ + s64 ret; + unsigned long flags; + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + + spin_lock_irqsave(&phb->lock, flags); + + ret = opal_pci_get_phb_diag_data2(phb->opal_id, + phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); + if (ret) { + spin_unlock_irqrestore(&phb->lock, flags); + pr_warning("%s: Failed to get log for PHB#%x-PE#%x\n", + __func__, hose->global_number, pe->addr); + return -EIO; + } + + /* + * FIXME: We probably need log the error in somewhere. + * Lets make it up in future. + */ + /* pr_info("%s", phb->diag.blob); */ + + spin_unlock_irqrestore(&phb->lock, flags); + + return 0; +} + +/** + * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE + * @pe: EEH PE + * + * For particular PE, it might have included PCI bridges. In order + * to make the PE work properly, those PCI bridges should be configured + * correctly. However, we need do nothing on P7IOC since the reset + * function will do everything that should be covered by the function. + */ +static int ioda_eeh_configure_bridge(struct eeh_pe *pe) +{ + return 0; +} + +static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data) +{ + /* GEM */ + pr_info(" GEM XFIR: %016llx\n", data->gemXfir); + pr_info(" GEM RFIR: %016llx\n", data->gemRfir); + pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir); + pr_info(" GEM Mask: %016llx\n", data->gemMask); + pr_info(" GEM RWOF: %016llx\n", data->gemRwof); + + /* LEM */ + pr_info(" LEM FIR: %016llx\n", data->lemFir); + pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask); + pr_info(" LEM Action 0: %016llx\n", data->lemAction0); + pr_info(" LEM Action 1: %016llx\n", data->lemAction1); + pr_info(" LEM WOF: %016llx\n", data->lemWof); +} + +static void ioda_eeh_hub_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + struct OpalIoP7IOCErrorData *data; + long rc; + + data = (struct OpalIoP7IOCErrorData *)ioda_eeh_hub_diag; + rc = opal_pci_get_hub_diag_data(phb->hub_id, data, PAGE_SIZE); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n", + __func__, phb->hub_id, rc); + return; + } + + switch (data->type) { + case OPAL_P7IOC_DIAG_TYPE_RGC: + pr_info("P7IOC diag-data for RGC\n\n"); + ioda_eeh_hub_diag_common(data); + pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus); + pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp); + break; + case OPAL_P7IOC_DIAG_TYPE_BI: + pr_info("P7IOC diag-data for BI %s\n\n", + data->bi.biDownbound ? "Downbound" : "Upbound"); + ioda_eeh_hub_diag_common(data); + pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0); + pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1); + pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2); + pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus); + break; + case OPAL_P7IOC_DIAG_TYPE_CI: + pr_info("P7IOC diag-data for CI Port %d\\nn", + data->ci.ciPort); + ioda_eeh_hub_diag_common(data); + pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus); + pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp); + break; + case OPAL_P7IOC_DIAG_TYPE_MISC: + pr_info("P7IOC diag-data for MISC\n\n"); + ioda_eeh_hub_diag_common(data); + break; + case OPAL_P7IOC_DIAG_TYPE_I2C: + pr_info("P7IOC diag-data for I2C\n\n"); + ioda_eeh_hub_diag_common(data); + break; + default: + pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n", + __func__, phb->hub_id, data->type); + } +} + +static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose, + struct OpalIoPhbErrorCommon *common) +{ + struct OpalIoP7IOCPhbErrorData *data; + int i; + + data = (struct OpalIoP7IOCPhbErrorData *)common; + + pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n\n", + hose->global_number, common->version); + + pr_info(" brdgCtl: %08x\n", data->brdgCtl); + + pr_info(" portStatusReg: %08x\n", data->portStatusReg); + pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); + pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); + + pr_info(" deviceStatus: %08x\n", data->deviceStatus); + pr_info(" slotStatus: %08x\n", data->slotStatus); + pr_info(" linkStatus: %08x\n", data->linkStatus); + pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); + pr_info(" devSecStatus: %08x\n", data->devSecStatus); + + pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); + pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); + pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); + pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); + pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); + pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); + pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); + pr_info(" sourceId: %08x\n", data->sourceId); + + pr_info(" errorClass: %016llx\n", data->errorClass); + pr_info(" correlator: %016llx\n", data->correlator); + pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr); + pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr); + pr_info(" lemFir: %016llx\n", data->lemFir); + pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); + pr_info(" lemWOF: %016llx\n", data->lemWOF); + pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); + pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); + pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); + pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); + pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); + pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); + pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); + pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); + pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); + pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); + pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); + pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); + pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); + pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); + pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); + pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); + + for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { + if ((data->pestA[i] >> 63) == 0 && + (data->pestB[i] >> 63) == 0) + continue; + + pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); + pr_info(" PESTB: %016llx\n", data->pestB[i]); + } +} + +static void ioda_eeh_phb_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + struct OpalIoPhbErrorCommon *common; + long rc; + + common = (struct OpalIoPhbErrorCommon *)phb->diag.blob; + rc = opal_pci_get_phb_diag_data2(phb->opal_id, common, PAGE_SIZE); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", + __func__, hose->global_number, rc); + return; + } + + switch (common->ioType) { + case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: + ioda_eeh_p7ioc_phb_diag(hose, common); + break; + default: + pr_warning("%s: Unrecognized I/O chip %d\n", + __func__, common->ioType); + } +} + +static int ioda_eeh_get_phb_pe(struct pci_controller *hose, + struct eeh_pe **pe) +{ + struct eeh_pe *phb_pe; + + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) { + pr_warning("%s Can't find PE for PHB#%d\n", + __func__, hose->global_number); + return -EEXIST; + } + + *pe = phb_pe; + return 0; +} + +static int ioda_eeh_get_pe(struct pci_controller *hose, + u16 pe_no, struct eeh_pe **pe) +{ + struct eeh_pe *phb_pe, *dev_pe; + struct eeh_dev dev; + + /* Find the PHB PE */ + if (ioda_eeh_get_phb_pe(hose, &phb_pe)) + return -EEXIST; + + /* Find the PE according to PE# */ + memset(&dev, 0, sizeof(struct eeh_dev)); + dev.phb = hose; + dev.pe_config_addr = pe_no; + dev_pe = eeh_pe_get(&dev); + if (!dev_pe) { + pr_warning("%s: Can't find PE for PHB#%x - PE#%x\n", + __func__, hose->global_number, pe_no); + return -EEXIST; + } + + *pe = dev_pe; + return 0; +} + +/** + * ioda_eeh_next_error - Retrieve next error for EEH core to handle + * @pe: The affected PE + * + * The function is expected to be called by EEH core while it gets + * special EEH event (without binding PE). The function calls to + * OPAL APIs for next error to handle. The informational error is + * handled internally by platform. However, the dead IOC, dead PHB, + * fenced PHB and frozen PE should be handled by EEH core eventually. + */ +static int ioda_eeh_next_error(struct eeh_pe **pe) +{ + struct pci_controller *hose, *tmp; + struct pnv_phb *phb; + u64 frozen_pe_no; + u16 err_type, severity; + long rc; + int ret = 1; + + /* + * While running here, it's safe to purge the event queue. + * And we should keep the cached OPAL notifier event sychronized + * between the kernel and firmware. + */ + eeh_remove_event(NULL); + opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + /* + * If the subordinate PCI buses of the PHB has been + * removed, we needn't take care of it any more. + */ + phb = hose->private_data; + if (phb->eeh_state & PNV_EEH_STATE_REMOVED) + continue; + + rc = opal_pci_next_error(phb->opal_id, + &frozen_pe_no, &err_type, &severity); + + /* If OPAL API returns error, we needn't proceed */ + if (rc != OPAL_SUCCESS) { + IODA_EEH_DBG("%s: Invalid return value on " + "PHB#%x (0x%lx) from opal_pci_next_error", + __func__, hose->global_number, rc); + continue; + } + + /* If the PHB doesn't have error, stop processing */ + if (err_type == OPAL_EEH_NO_ERROR || + severity == OPAL_EEH_SEV_NO_ERROR) { + IODA_EEH_DBG("%s: No error found on PHB#%x\n", + __func__, hose->global_number); + continue; + } + + /* + * Processing the error. We're expecting the error with + * highest priority reported upon multiple errors on the + * specific PHB. + */ + IODA_EEH_DBG("%s: Error (%d, %d, %d) on PHB#%x\n", + err_type, severity, pe_no, hose->global_number); + switch (err_type) { + case OPAL_EEH_IOC_ERROR: + if (severity == OPAL_EEH_SEV_IOC_DEAD) { + list_for_each_entry_safe(hose, tmp, + &hose_list, list_node) { + phb = hose->private_data; + phb->eeh_state |= PNV_EEH_STATE_REMOVED; + } + + pr_err("EEH: dead IOC detected\n"); + ret = 4; + goto out; + } else if (severity == OPAL_EEH_SEV_INF) { + pr_info("EEH: IOC informative error " + "detected\n"); + ioda_eeh_hub_diag(hose); + } + + break; + case OPAL_EEH_PHB_ERROR: + if (severity == OPAL_EEH_SEV_PHB_DEAD) { + if (ioda_eeh_get_phb_pe(hose, pe)) + break; + + pr_err("EEH: dead PHB#%x detected\n", + hose->global_number); + phb->eeh_state |= PNV_EEH_STATE_REMOVED; + ret = 3; + goto out; + } else if (severity == OPAL_EEH_SEV_PHB_FENCED) { + if (ioda_eeh_get_phb_pe(hose, pe)) + break; + + pr_err("EEH: fenced PHB#%x detected\n", + hose->global_number); + ret = 2; + goto out; + } else if (severity == OPAL_EEH_SEV_INF) { + pr_info("EEH: PHB#%x informative error " + "detected\n", + hose->global_number); + ioda_eeh_phb_diag(hose); + } + + break; + case OPAL_EEH_PE_ERROR: + if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) + break; + + pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", + (*pe)->addr, (*pe)->phb->global_number); + ret = 1; + goto out; + } + } + + ret = 0; +out: + return ret; +} + +struct pnv_eeh_ops ioda_eeh_ops = { + .post_init = ioda_eeh_post_init, + .set_option = ioda_eeh_set_option, + .get_state = ioda_eeh_get_state, + .reset = ioda_eeh_reset, + .get_log = ioda_eeh_get_log, + .configure_bridge = ioda_eeh_configure_bridge, + .next_error = ioda_eeh_next_error +}; |
