summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel')
-rw-r--r--arch/powerpc/kernel/Makefile3
-rw-r--r--arch/powerpc/kernel/crash_dump.c1
-rw-r--r--arch/powerpc/kernel/dma-swiotlb.c8
-rw-r--r--arch/powerpc/kernel/dma.c47
-rw-r--r--arch/powerpc/kernel/eeh.c269
-rw-r--r--arch/powerpc/kernel/eeh_driver.c106
-rw-r--r--arch/powerpc/kernel/eeh_pe.c23
-rw-r--r--arch/powerpc/kernel/eeh_sysfs.c41
-rw-r--r--arch/powerpc/kernel/head_8xx.S150
-rw-r--r--arch/powerpc/kernel/hw_breakpoint.c2
-rw-r--r--arch/powerpc/kernel/ibmebus.c2
-rw-r--r--arch/powerpc/kernel/idle_power7.S2
-rw-r--r--arch/powerpc/kernel/irq.c6
-rw-r--r--arch/powerpc/kernel/legacy_serial.c2
-rw-r--r--arch/powerpc/kernel/module_32.c31
-rw-r--r--arch/powerpc/kernel/module_64.c36
-rw-r--r--arch/powerpc/kernel/nvram_64.c2
-rw-r--r--arch/powerpc/kernel/of_platform.c2
-rw-r--r--arch/powerpc/kernel/pci-common.c3
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c2
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c192
-rw-r--r--arch/powerpc/kernel/ppc_ksyms_32.c61
-rw-r--r--arch/powerpc/kernel/process.c2
-rw-r--r--arch/powerpc/kernel/prom.c13
-rw-r--r--arch/powerpc/kernel/prom_init_check.sh22
-rw-r--r--arch/powerpc/kernel/ptrace.c2
-rw-r--r--arch/powerpc/kernel/rtasd.c2
-rw-r--r--arch/powerpc/kernel/setup-common.c7
-rw-r--r--arch/powerpc/kernel/setup_32.c2
-rw-r--r--arch/powerpc/kernel/setup_64.c32
-rw-r--r--arch/powerpc/kernel/smp.c11
-rw-r--r--arch/powerpc/kernel/time.c5
32 files changed, 641 insertions, 448 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 670c312d914e..502cf69b6c89 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -93,6 +93,9 @@ obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
+ifeq ($(CONFIG_PPC32),y)
+obj-$(CONFIG_MODULES) += ppc_ksyms_32.o
+endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 7a13f378ca2c..c78e6dac4d7d 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,6 +13,7 @@
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
+#include <linux/io.h>
#include <linux/memblock.h>
#include <asm/code-patching.h>
#include <asm/kdump.h>
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index bd1a2aba599f..735979764cd4 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -106,10 +106,14 @@ int __init swiotlb_setup_bus_notifier(void)
return 0;
}
-void swiotlb_detect_4g(void)
+void __init swiotlb_detect_4g(void)
{
- if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
+ if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
ppc_swiotlb_enable = 1;
+#ifdef CONFIG_ZONE_DMA32
+ limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT);
+#endif
+ }
}
static int __init swiotlb_late_init(void)
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index ee78f6e49d64..adac9dc54aee 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -15,6 +15,7 @@
#include <asm/vio.h>
#include <asm/bug.h>
#include <asm/machdep.h>
+#include <asm/swiotlb.h>
/*
* Generic direct DMA implementation
@@ -25,6 +26,18 @@
* default the offset is PCI_DRAM_OFFSET.
*/
+static u64 __maybe_unused get_pfn_limit(struct device *dev)
+{
+ u64 pfn = (dev->coherent_dma_mask >> PAGE_SHIFT) + 1;
+ struct dev_archdata __maybe_unused *sd = &dev->archdata;
+
+#ifdef CONFIG_SWIOTLB
+ if (sd->max_direct_dma_addr && sd->dma_ops == &swiotlb_dma_ops)
+ pfn = min_t(u64, pfn, sd->max_direct_dma_addr >> PAGE_SHIFT);
+#endif
+
+ return pfn;
+}
void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag,
@@ -40,6 +53,26 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
#else
struct page *page;
int node = dev_to_node(dev);
+ u64 pfn = get_pfn_limit(dev);
+ int zone;
+
+ zone = dma_pfn_limit_to_zone(pfn);
+ if (zone < 0) {
+ dev_err(dev, "%s: No suitable zone for pfn %#llx\n",
+ __func__, pfn);
+ return NULL;
+ }
+
+ switch (zone) {
+ case ZONE_DMA:
+ flag |= GFP_DMA;
+ break;
+#ifdef CONFIG_ZONE_DMA32
+ case ZONE_DMA32:
+ flag |= GFP_DMA32;
+ break;
+#endif
+ };
/* ignore region specifiers */
flag &= ~(__GFP_HIGHMEM);
@@ -202,6 +235,7 @@ int __dma_set_mask(struct device *dev, u64 dma_mask)
*dev->dma_mask = dma_mask;
return 0;
}
+
int dma_set_mask(struct device *dev, u64 dma_mask)
{
if (ppc_md.dma_set_mask)
@@ -210,13 +244,10 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
}
EXPORT_SYMBOL(dma_set_mask);
-u64 dma_get_required_mask(struct device *dev)
+u64 __dma_get_required_mask(struct device *dev)
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
- if (ppc_md.dma_get_required_mask)
- return ppc_md.dma_get_required_mask(dev);
-
if (unlikely(dma_ops == NULL))
return 0;
@@ -225,6 +256,14 @@ u64 dma_get_required_mask(struct device *dev)
return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
}
+
+u64 dma_get_required_mask(struct device *dev)
+{
+ if (ppc_md.dma_get_required_mask)
+ return ppc_md.dma_get_required_mask(dev);
+
+ return __dma_get_required_mask(dev);
+}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
static int __init dma_init(void)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 59a64f8dc85f..d543e4179c18 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -117,7 +117,7 @@ static DEFINE_MUTEX(eeh_dev_mutex);
* not dynamically alloced, so that it ends up in RMO where RTAS
* can access it.
*/
-#define EEH_PCI_REGS_LOG_LEN 4096
+#define EEH_PCI_REGS_LOG_LEN 8192
static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
/*
@@ -148,16 +148,12 @@ static int __init eeh_setup(char *str)
}
__setup("eeh=", eeh_setup);
-/**
- * eeh_gather_pci_data - Copy assorted PCI config space registers to buff
- * @edev: device to report data for
- * @buf: point to buffer in which to log
- * @len: amount of room in buffer
- *
- * This routine captures assorted PCI configuration space data,
- * and puts them into a buffer for RTAS error logging.
+/*
+ * This routine captures assorted PCI configuration space data
+ * for the indicated PCI device, and puts them into a buffer
+ * for RTAS error logging.
*/
-static size_t eeh_gather_pci_data(struct eeh_dev *edev, char *buf, size_t len)
+static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
{
struct device_node *dn = eeh_dev_to_of_node(edev);
u32 cfg;
@@ -255,6 +251,19 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char *buf, size_t len)
return n;
}
+static void *eeh_dump_pe_log(void *data, void *flag)
+{
+ struct eeh_pe *pe = data;
+ struct eeh_dev *edev, *tmp;
+ size_t *plen = flag;
+
+ eeh_pe_for_each_dev(pe, edev, tmp)
+ *plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen,
+ EEH_PCI_REGS_LOG_LEN - *plen);
+
+ return NULL;
+}
+
/**
* eeh_slot_error_detail - Generate combined log including driver log and error log
* @pe: EEH PE
@@ -268,7 +277,6 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char *buf, size_t len)
void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
- struct eeh_dev *edev, *tmp;
/*
* When the PHB is fenced or dead, it's pointless to collect
@@ -286,10 +294,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
eeh_pe_restore_bars(pe);
pci_regs_buf[0] = 0;
- eeh_pe_for_each_dev(pe, edev, tmp) {
- loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
- EEH_PCI_REGS_LOG_LEN - loglen);
- }
+ eeh_pe_traverse(pe, eeh_dump_pe_log, &loglen);
}
eeh_ops->get_log(pe, severity, pci_regs_buf, loglen);
@@ -410,7 +415,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
}
dn = eeh_dev_to_of_node(edev);
dev = eeh_dev_to_pci_dev(edev);
- pe = edev->pe;
+ pe = eeh_dev_to_pe(edev);
/* Access to IO BARs might get this far and still not want checking. */
if (!pe) {
@@ -542,17 +547,16 @@ EXPORT_SYMBOL_GPL(eeh_dev_check_failure);
/**
* eeh_check_failure - Check if all 1's data is due to EEH slot freeze
- * @token: I/O token, should be address in the form 0xA....
- * @val: value, should be all 1's (XXX why do we need this arg??)
+ * @token: I/O address
*
- * Check for an EEH failure at the given token address. Call this
+ * Check for an EEH failure at the given I/O address. Call this
* routine if the result of a read was all 0xff's and you want to
- * find out if this is due to an EEH slot freeze event. This routine
+ * find out if this is due to an EEH slot freeze event. This routine
* will query firmware for the EEH status.
*
* Note this routine is safe to call in an interrupt context.
*/
-unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+int eeh_check_failure(const volatile void __iomem *token)
{
unsigned long addr;
struct eeh_dev *edev;
@@ -562,13 +566,11 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
edev = eeh_addr_cache_get_dev(addr);
if (!edev) {
eeh_stats.no_device++;
- return val;
+ return 0;
}
- eeh_dev_check_failure(edev);
- return val;
+ return eeh_dev_check_failure(edev);
}
-
EXPORT_SYMBOL(eeh_check_failure);
@@ -582,25 +584,51 @@ EXPORT_SYMBOL(eeh_check_failure);
*/
int eeh_pci_enable(struct eeh_pe *pe, int function)
{
- int rc, flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+ int active_flag, rc;
/*
* pHyp doesn't allow to enable IO or DMA on unfrozen PE.
* Also, it's pointless to enable them on unfrozen PE. So
- * we have the check here.
+ * we have to check before enabling IO or DMA.
*/
- if (function == EEH_OPT_THAW_MMIO ||
- function == EEH_OPT_THAW_DMA) {
+ switch (function) {
+ case EEH_OPT_THAW_MMIO:
+ active_flag = EEH_STATE_MMIO_ACTIVE;
+ break;
+ case EEH_OPT_THAW_DMA:
+ active_flag = EEH_STATE_DMA_ACTIVE;
+ break;
+ case EEH_OPT_DISABLE:
+ case EEH_OPT_ENABLE:
+ case EEH_OPT_FREEZE_PE:
+ active_flag = 0;
+ break;
+ default:
+ pr_warn("%s: Invalid function %d\n",
+ __func__, function);
+ return -EINVAL;
+ }
+
+ /*
+ * Check if IO or DMA has been enabled before
+ * enabling them.
+ */
+ if (active_flag) {
rc = eeh_ops->get_state(pe, NULL);
if (rc < 0)
return rc;
- /* Needn't to enable or already enabled */
- if ((rc == EEH_STATE_NOT_SUPPORT) ||
- ((rc & flags) == flags))
+ /* Needn't enable it at all */
+ if (rc == EEH_STATE_NOT_SUPPORT)
+ return 0;
+
+ /* It's already enabled */
+ if (rc & active_flag)
return 0;
}
+
+ /* Issue the request */
rc = eeh_ops->set_option(pe, function);
if (rc)
pr_warn("%s: Unexpected state change %d on "
@@ -608,17 +636,17 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
__func__, function, pe->phb->global_number,
pe->addr, rc);
- rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
- if (rc <= 0)
- return rc;
+ /* Check if the request is finished successfully */
+ if (active_flag) {
+ rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
+ if (rc <= 0)
+ return rc;
- if ((function == EEH_OPT_THAW_MMIO) &&
- (rc & EEH_STATE_MMIO_ENABLED))
- return 0;
+ if (rc & active_flag)
+ return 0;
- if ((function == EEH_OPT_THAW_DMA) &&
- (rc & EEH_STATE_DMA_ENABLED))
- return 0;
+ return -EIO;
+ }
return rc;
}
@@ -634,7 +662,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
- struct eeh_pe *pe = edev->pe;
+ struct eeh_pe *pe = eeh_dev_to_pe(edev);
if (!pe) {
pr_err("%s: No PE found on PCI device %s\n",
@@ -645,14 +673,18 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
switch (state) {
case pcie_deassert_reset:
eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
break;
case pcie_hot_reset:
+ eeh_pe_state_mark(pe, EEH_PE_RESET);
eeh_ops->reset(pe, EEH_RESET_HOT);
break;
case pcie_warm_reset:
+ eeh_pe_state_mark(pe, EEH_PE_RESET);
eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
break;
default:
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
return -EINVAL;
};
@@ -1141,6 +1173,85 @@ void eeh_remove_device(struct pci_dev *dev)
edev->mode &= ~EEH_DEV_SYSFS;
}
+int eeh_unfreeze_pe(struct eeh_pe *pe, bool sw_state)
+{
+ int ret;
+
+ ret = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
+ if (ret) {
+ pr_warn("%s: Failure %d enabling IO on PHB#%x-PE#%x\n",
+ __func__, ret, pe->phb->global_number, pe->addr);
+ return ret;
+ }
+
+ ret = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
+ if (ret) {
+ pr_warn("%s: Failure %d enabling DMA on PHB#%x-PE#%x\n",
+ __func__, ret, pe->phb->global_number, pe->addr);
+ return ret;
+ }
+
+ /* Clear software isolated state */
+ if (sw_state && (pe->state & EEH_PE_ISOLATED))
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+
+ return ret;
+}
+
+
+static struct pci_device_id eeh_reset_ids[] = {
+ { PCI_DEVICE(0x19a2, 0x0710) }, /* Emulex, BE */
+ { PCI_DEVICE(0x10df, 0xe220) }, /* Emulex, Lancer */
+ { 0 }
+};
+
+static int eeh_pe_change_owner(struct eeh_pe *pe)
+{
+ struct eeh_dev *edev, *tmp;
+ struct pci_dev *pdev;
+ struct pci_device_id *id;
+ int flags, ret;
+
+ /* Check PE state */
+ flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+ ret = eeh_ops->get_state(pe, NULL);
+ if (ret < 0 || ret == EEH_STATE_NOT_SUPPORT)
+ return 0;
+
+ /* Unfrozen PE, nothing to do */
+ if ((ret & flags) == flags)
+ return 0;
+
+ /* Frozen PE, check if it needs PE level reset */
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ continue;
+
+ for (id = &eeh_reset_ids[0]; id->vendor != 0; id++) {
+ if (id->vendor != PCI_ANY_ID &&
+ id->vendor != pdev->vendor)
+ continue;
+ if (id->device != PCI_ANY_ID &&
+ id->device != pdev->device)
+ continue;
+ if (id->subvendor != PCI_ANY_ID &&
+ id->subvendor != pdev->subsystem_vendor)
+ continue;
+ if (id->subdevice != PCI_ANY_ID &&
+ id->subdevice != pdev->subsystem_device)
+ continue;
+
+ goto reset;
+ }
+ }
+
+ return eeh_unfreeze_pe(pe, true);
+
+reset:
+ return eeh_pe_reset_and_recover(pe);
+}
+
/**
* eeh_dev_open - Increase count of pass through devices for PE
* @pdev: PCI device
@@ -1153,6 +1264,7 @@ void eeh_remove_device(struct pci_dev *dev)
int eeh_dev_open(struct pci_dev *pdev)
{
struct eeh_dev *edev;
+ int ret = -ENODEV;
mutex_lock(&eeh_dev_mutex);
@@ -1165,6 +1277,16 @@ int eeh_dev_open(struct pci_dev *pdev)
if (!edev || !edev->pe)
goto out;
+ /*
+ * The PE might have been put into frozen state, but we
+ * didn't detect that yet. The passed through PCI devices
+ * in frozen PE won't work properly. Clear the frozen state
+ * in advance.
+ */
+ ret = eeh_pe_change_owner(edev->pe);
+ if (ret)
+ goto out;
+
/* Increase PE's pass through count */
atomic_inc(&edev->pe->pass_dev_cnt);
mutex_unlock(&eeh_dev_mutex);
@@ -1172,7 +1294,7 @@ int eeh_dev_open(struct pci_dev *pdev)
return 0;
out:
mutex_unlock(&eeh_dev_mutex);
- return -ENODEV;
+ return ret;
}
EXPORT_SYMBOL_GPL(eeh_dev_open);
@@ -1202,6 +1324,7 @@ void eeh_dev_release(struct pci_dev *pdev)
/* Decrease PE's pass through count */
atomic_dec(&edev->pe->pass_dev_cnt);
WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
+ eeh_pe_change_owner(edev->pe);
out:
mutex_unlock(&eeh_dev_mutex);
}
@@ -1281,8 +1404,10 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option)
*/
switch (option) {
case EEH_OPT_ENABLE:
- if (eeh_enabled())
+ if (eeh_enabled()) {
+ ret = eeh_pe_change_owner(pe);
break;
+ }
ret = -EIO;
break;
case EEH_OPT_DISABLE:
@@ -1294,7 +1419,7 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option)
break;
}
- ret = eeh_ops->set_option(pe, option);
+ ret = eeh_pci_enable(pe, option);
break;
default:
pr_debug("%s: Option %d out of range (%d, %d)\n",
@@ -1345,6 +1470,36 @@ int eeh_pe_get_state(struct eeh_pe *pe)
}
EXPORT_SYMBOL_GPL(eeh_pe_get_state);
+static int eeh_pe_reenable_devices(struct eeh_pe *pe)
+{
+ struct eeh_dev *edev, *tmp;
+ struct pci_dev *pdev;
+ int ret = 0;
+
+ /* Restore config space */
+ eeh_pe_restore_bars(pe);
+
+ /*
+ * Reenable PCI devices as the devices passed
+ * through are always enabled before the reset.
+ */
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ continue;
+
+ ret = pci_reenable_device(pdev);
+ if (ret) {
+ pr_warn("%s: Failure %d reenabling %s\n",
+ __func__, ret, pci_name(pdev));
+ return ret;
+ }
+ }
+
+ /* The PE is still in frozen state */
+ return eeh_unfreeze_pe(pe, true);
+}
+
/**
* eeh_pe_reset - Issue PE reset according to specified type
* @pe: EEH PE
@@ -1368,23 +1523,22 @@ int eeh_pe_reset(struct eeh_pe *pe, int option)
switch (option) {
case EEH_RESET_DEACTIVATE:
ret = eeh_ops->reset(pe, option);
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
if (ret)
break;
- /*
- * The PE is still in frozen state and we need to clear
- * that. It's good to clear frozen state after deassert
- * to avoid messy IO access during reset, which might
- * cause recursive frozen PE.
- */
- ret = eeh_ops->set_option(pe, EEH_OPT_THAW_MMIO);
- if (!ret)
- ret = eeh_ops->set_option(pe, EEH_OPT_THAW_DMA);
- if (!ret)
- eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+ ret = eeh_pe_reenable_devices(pe);
break;
case EEH_RESET_HOT:
case EEH_RESET_FUNDAMENTAL:
+ /*
+ * Proactively freeze the PE to drop all MMIO access
+ * during reset, which should be banned as it's always
+ * cause recursive EEH error.
+ */
+ eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+
+ eeh_pe_state_mark(pe, EEH_PE_RESET);
ret = eeh_ops->reset(pe, option);
break;
default:
@@ -1413,9 +1567,6 @@ int eeh_pe_configure(struct eeh_pe *pe)
if (!pe)
return -ENODEV;
- /* Restore config space for the affected devices */
- eeh_pe_restore_bars(pe);
-
return ret;
}
EXPORT_SYMBOL_GPL(eeh_pe_configure);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 6a0dcee8e931..3fd514f8e4b2 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -180,6 +180,22 @@ static bool eeh_dev_removed(struct eeh_dev *edev)
return false;
}
+static void *eeh_dev_save_state(void *data, void *userdata)
+{
+ struct eeh_dev *edev = data;
+ struct pci_dev *pdev;
+
+ if (!edev)
+ return NULL;
+
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ return NULL;
+
+ pci_save_state(pdev);
+ return NULL;
+}
+
/**
* eeh_report_error - Report pci error to each device driver
* @data: eeh device
@@ -303,6 +319,22 @@ static void *eeh_report_reset(void *data, void *userdata)
return NULL;
}
+static void *eeh_dev_restore_state(void *data, void *userdata)
+{
+ struct eeh_dev *edev = data;
+ struct pci_dev *pdev;
+
+ if (!edev)
+ return NULL;
+
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ return NULL;
+
+ pci_restore_state(pdev);
+ return NULL;
+}
+
/**
* eeh_report_resume - Tell device to resume normal operations
* @data: eeh device
@@ -450,38 +482,82 @@ static void *eeh_pe_detach_dev(void *data, void *userdata)
static void *__eeh_clear_pe_frozen_state(void *data, void *flag)
{
struct eeh_pe *pe = (struct eeh_pe *)data;
- int i, rc;
+ bool *clear_sw_state = flag;
+ int i, rc = 1;
- for (i = 0; i < 3; i++) {
- rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
- if (rc)
- continue;
- rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
- if (!rc)
- break;
- }
+ for (i = 0; rc && i < 3; i++)
+ rc = eeh_unfreeze_pe(pe, clear_sw_state);
- /* The PE has been isolated, clear it */
+ /* Stop immediately on any errors */
if (rc) {
- pr_warn("%s: Can't clear frozen PHB#%x-PE#%x (%d)\n",
- __func__, pe->phb->global_number, pe->addr, rc);
+ pr_warn("%s: Failure %d unfreezing PHB#%x-PE#%x\n",
+ __func__, rc, pe->phb->global_number, pe->addr);
return (void *)pe;
}
return NULL;
}
-static int eeh_clear_pe_frozen_state(struct eeh_pe *pe)
+static int eeh_clear_pe_frozen_state(struct eeh_pe *pe,
+ bool clear_sw_state)
{
void *rc;
- rc = eeh_pe_traverse(pe, __eeh_clear_pe_frozen_state, NULL);
+ rc = eeh_pe_traverse(pe, __eeh_clear_pe_frozen_state, &clear_sw_state);
if (!rc)
eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
return rc ? -EIO : 0;
}
+int eeh_pe_reset_and_recover(struct eeh_pe *pe)
+{
+ int result, ret;
+
+ /* Bail if the PE is being recovered */
+ if (pe->state & EEH_PE_RECOVERING)
+ return 0;
+
+ /* Put the PE into recovery mode */
+ eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
+
+ /* Save states */
+ eeh_pe_dev_traverse(pe, eeh_dev_save_state, NULL);
+
+ /* Report error */
+ eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+
+ /* Issue reset */
+ eeh_pe_state_mark(pe, EEH_PE_RESET);
+ ret = eeh_reset_pe(pe);
+ if (ret) {
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_RESET);
+ return ret;
+ }
+ eeh_pe_state_clear(pe, EEH_PE_RESET);
+
+ /* Unfreeze the PE */
+ ret = eeh_clear_pe_frozen_state(pe, true);
+ if (ret) {
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+ return ret;
+ }
+
+ /* Notify completion of reset */
+ eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
+
+ /* Restore device state */
+ eeh_pe_dev_traverse(pe, eeh_dev_restore_state, NULL);
+
+ /* Resume */
+ eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
+
+ /* Clear recovery mode */
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
+
+ return 0;
+}
+
/**
* eeh_reset_device - Perform actual reset of a pci slot
* @pe: EEH PE
@@ -540,7 +616,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
eeh_pe_state_clear(pe, EEH_PE_RESET);
/* Clear frozen state */
- rc = eeh_clear_pe_frozen_state(pe);
+ rc = eeh_clear_pe_frozen_state(pe, false);
if (rc)
return rc;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 00e3844525a6..53dd0915e690 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -428,7 +428,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
}
/* Remove the EEH device */
- pe = edev->pe;
+ pe = eeh_dev_to_pe(edev);
edev->pe = NULL;
list_del(&edev->list);
@@ -584,6 +584,8 @@ static void *__eeh_pe_state_clear(void *data, void *flag)
{
struct eeh_pe *pe = (struct eeh_pe *)data;
int state = *((int *)flag);
+ struct eeh_dev *edev, *tmp;
+ struct pci_dev *pdev;
/* Keep the state of permanently removed PE intact */
if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) &&
@@ -592,9 +594,22 @@ static void *__eeh_pe_state_clear(void *data, void *flag)
pe->state &= ~state;
- /* Clear check count since last isolation */
- if (state & EEH_PE_ISOLATED)
- pe->check_count = 0;
+ /*
+ * Special treatment on clearing isolated state. Clear
+ * check count since last isolation and put all affected
+ * devices to normal state.
+ */
+ if (!(state & EEH_PE_ISOLATED))
+ return NULL;
+
+ pe->check_count = 0;
+ eeh_pe_for_each_dev(pe, edev, tmp) {
+ pdev = eeh_dev_to_pci_dev(edev);
+ if (!pdev)
+ continue;
+
+ pdev->error_state = pci_channel_io_normal;
+ }
return NULL;
}
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index e2595ba4b720..f19b1e5cb060 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -54,6 +54,43 @@ EEH_SHOW_ATTR(eeh_mode, mode, "0x%x");
EEH_SHOW_ATTR(eeh_config_addr, config_addr, "0x%x");
EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x");
+static ssize_t eeh_pe_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+ int state;
+
+ if (!edev || !edev->pe)
+ return -ENODEV;
+
+ state = eeh_ops->get_state(edev->pe, NULL);
+ return sprintf(buf, "%0x08x %0x08x\n",
+ state, edev->pe->state);
+}
+
+static ssize_t eeh_pe_state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+
+ if (!edev || !edev->pe)
+ return -ENODEV;
+
+ /* Nothing to do if it's not frozen */
+ if (!(edev->pe->state & EEH_PE_ISOLATED))
+ return count;
+
+ if (eeh_unfreeze_pe(edev->pe, true))
+ return -EIO;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(eeh_pe_state);
+
void eeh_sysfs_add_device(struct pci_dev *pdev)
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
@@ -68,9 +105,10 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+ rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_state);
if (rc)
- printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+ pr_warn("EEH: Unable to create sysfs entries\n");
else if (edev)
edev->mode |= EEH_DEV_SYSFS;
}
@@ -92,6 +130,7 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+ device_remove_file(&pdev->dev, &dev_attr_eeh_pe_state);
if (edev)
edev->mode &= ~EEH_DEV_SYSFS;
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 7ee876d2adb5..fafff8dbd5d9 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -104,12 +104,15 @@ turn_on_mmu:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG_SCRATCH0,r10; \
- mtspr SPRN_SPRG_SCRATCH1,r11; \
- mfcr r10; \
+ EXCEPTION_PROLOG_0; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
+#define EXCEPTION_PROLOG_0 \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
+ mfcr r10
+
#define EXCEPTION_PROLOG_1 \
mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
andi. r11,r11,MSR_PR; \
@@ -145,6 +148,14 @@ turn_on_mmu:
SAVE_2GPRS(7, r11)
/*
+ * Exception exit code.
+ */
+#define EXCEPTION_EPILOG_0 \
+ mtcr r10; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
+ mfspr r11,SPRN_SPRG_SCRATCH1
+
+/*
* Note: code which follows this uses cr0.eq (set if from kernel),
* r11, r12 (SRR0), and r9 (SRR1).
*
@@ -293,16 +304,8 @@ InstructionTLBMiss:
#ifdef CONFIG_8xx_CPU6
stw r3, 8(r0)
#endif
- DO_8xx_CPU6(0x3f80, r3)
- mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
- mfcr r10
-#ifdef CONFIG_8xx_CPU6
- stw r10, 0(r0)
- stw r11, 4(r0)
-#else
- mtspr SPRN_DAR, r10
- mtspr SPRN_SPRG2, r11
-#endif
+ EXCEPTION_PROLOG_0
+ mtspr SPRN_SPRG_SCRATCH2, r10
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
#ifdef CONFIG_8xx_CPU15
addi r11, r10, 0x1000
@@ -359,18 +362,11 @@ InstructionTLBMiss:
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
/* Restore registers */
-#ifndef CONFIG_8xx_CPU6
- mfspr r10, SPRN_DAR
- mtcr r10
- mtspr SPRN_DAR, r11 /* Tag DAR */
- mfspr r11, SPRN_SPRG2
-#else
- lwz r11, 0(r0)
- mtcr r11
- lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
- mfspr r10, SPRN_M_TW
+ mfspr r10, SPRN_SPRG_SCRATCH2
+ EXCEPTION_EPILOG_0
rfi
2:
mfspr r11, SPRN_SRR1
@@ -381,19 +377,11 @@ InstructionTLBMiss:
mtspr SPRN_SRR1, r11
/* Restore registers */
-#ifndef CONFIG_8xx_CPU6
- mfspr r10, SPRN_DAR
- mtcr r10
- li r11, 0x00f0
- mtspr SPRN_DAR, r11 /* Tag DAR */
- mfspr r11, SPRN_SPRG2
-#else
- lwz r11, 0(r0)
- mtcr r11
- lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
- mfspr r10, SPRN_M_TW
+ mfspr r10, SPRN_SPRG_SCRATCH2
+ EXCEPTION_EPILOG_0
b InstructionAccess
. = 0x1200
@@ -401,16 +389,8 @@ DataStoreTLBMiss:
#ifdef CONFIG_8xx_CPU6
stw r3, 8(r0)
#endif
- DO_8xx_CPU6(0x3f80, r3)
- mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
- mfcr r10
-#ifdef CONFIG_8xx_CPU6
- stw r10, 0(r0)
- stw r11, 4(r0)
-#else
- mtspr SPRN_DAR, r10
- mtspr SPRN_SPRG2, r11
-#endif
+ EXCEPTION_PROLOG_0
+ mtspr SPRN_SPRG_SCRATCH2, r10
mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
/* If we are faulting a kernel address, we have to use the
@@ -483,19 +463,12 @@ DataStoreTLBMiss:
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
/* Restore registers */
-#ifndef CONFIG_8xx_CPU6
- mfspr r10, SPRN_DAR
- mtcr r10
- mtspr SPRN_DAR, r11 /* Tag DAR */
- mfspr r11, SPRN_SPRG2
-#else
- mtspr SPRN_DAR, r11 /* Tag DAR */
- lwz r11, 0(r0)
- mtcr r11
- lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
- mfspr r10, SPRN_M_TW
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r10, SPRN_SPRG_SCRATCH2
+ EXCEPTION_EPILOG_0
rfi
/* This is an instruction TLB error on the MPC8xx. This could be due
@@ -507,35 +480,18 @@ InstructionTLBError:
b InstructionAccess
/* This is the data TLB error on the MPC8xx. This could be due to
- * many reasons, including a dirty update to a pte. We can catch that
- * one here, but anything else is an error. First, we track down the
- * Linux pte. If it is valid, write access is allowed, but the
- * page dirty bit is not set, we will set it and reload the TLB. For
- * any other case, we bail out to a higher level function that can
- * handle it.
+ * many reasons, including a dirty update to a pte. We bail out to
+ * a higher level function that can handle it.
*/
. = 0x1400
DataTLBError:
-#ifdef CONFIG_8xx_CPU6
- stw r3, 8(r0)
-#endif
- DO_8xx_CPU6(0x3f80, r3)
- mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
- mfcr r10
- stw r10, 0(r0)
- stw r11, 4(r0)
+ EXCEPTION_PROLOG_0
- mfspr r10, SPRN_DAR
- cmpwi cr0, r10, 0x00f0
+ mfspr r11, SPRN_DAR
+ cmpwi cr0, r11, 0x00f0
beq- FixupDAR /* must be a buggy dcbX, icbi insn. */
-DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */
- mfspr r10, SPRN_M_TW /* Restore registers */
- lwz r11, 0(r0)
- mtcr r11
- lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
- lwz r3, 8(r0)
-#endif
+DARFixed:/* Return from dcbx instruction bug workaround */
+ EXCEPTION_EPILOG_0
b DataAccess
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
@@ -559,11 +515,15 @@ DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR
/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
* by decoding the registers used by the dcbx instruction and adding them.
- * DAR is set to the calculated address and r10 also holds the EA on exit.
+ * DAR is set to the calculated address.
*/
/* define if you don't want to use self modifying code */
#define NO_SELF_MODIFYING_CODE
FixupDAR:/* Entry point for dcbx workaround. */
+#ifdef CONFIG_8xx_CPU6
+ stw r3, 8(r0)
+#endif
+ mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
@@ -579,16 +539,17 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r11, 0(r11) /* Get the pte */
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0) /* restore r3 from memory */
+#endif
/* concat physical page address(r11) and page offset(r10) */
rlwimi r11, r10, 0, 20, 31
lwz r11,0(r11)
/* Check if it really is a dcbx instruction. */
/* dcbt and dcbtst does not generate DTLB Misses/Errors,
* no need to include them here */
- srwi r10, r11, 26 /* check if major OP code is 31 */
- cmpwi cr0, r10, 31
- bne- 141f
- rlwinm r10, r11, 0, 21, 30
+ xoris r10, r11, 0x7c00 /* check if major OP code is 31 */
+ rlwinm r10, r10, 0, 21, 5
cmpwi cr0, r10, 2028 /* Is dcbz? */
beq+ 142f
cmpwi cr0, r10, 940 /* Is dcbi? */
@@ -599,16 +560,13 @@ FixupDAR:/* Entry point for dcbx workaround. */
beq+ 142f
cmpwi cr0, r10, 1964 /* Is icbi? */
beq+ 142f
-141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */
+141: mfspr r10,SPRN_SPRG_SCRATCH2
b DARFixed /* Nope, go back to normal TLB processing */
144: mfspr r10, SPRN_DSISR
rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */
mtspr SPRN_DSISR, r10
142: /* continue, it was a dcbx, dcbi instruction. */
-#ifdef CONFIG_8xx_CPU6
- lwz r3, 8(r0) /* restore r3 from memory */
-#endif
#ifndef NO_SELF_MODIFYING_CODE
andis. r10,r11,0x1f /* test if reg RA is r0 */
li r10,modified_instr@l
@@ -619,14 +577,15 @@ FixupDAR:/* Entry point for dcbx workaround. */
stw r11,0(r10) /* store add/and instruction */
dcbf 0,r10 /* flush new instr. to memory. */
icbi 0,r10 /* invalidate instr. cache line */
- lwz r11, 4(r0) /* restore r11 from memory */
- mfspr r10, SPRN_M_TW /* restore r10 from M_TW */
+ mfspr r11, SPRN_SPRG_SCRATCH1 /* restore r11 */
+ mfspr r10, SPRN_SPRG_SCRATCH0 /* restore r10 */
isync /* Wait until new instr is loaded from memory */
modified_instr:
.space 4 /* this is where the add instr. is stored */
bne+ 143f
subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */
143: mtdar r10 /* store faulting EA in DAR */
+ mfspr r10,SPRN_SPRG_SCRATCH2
b DARFixed /* Go back to normal TLB handling */
#else
mfctr r10
@@ -680,13 +639,16 @@ modified_instr:
mfdar r11
mtctr r11 /* restore ctr reg from DAR */
mtdar r10 /* save fault EA to DAR */
+ mfspr r10,SPRN_SPRG_SCRATCH2
b DARFixed /* Go back to normal TLB handling */
/* special handling for r10,r11 since these are modified already */
-153: lwz r11, 4(r0) /* load r11 from memory */
- b 155f
-154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */
-155: add r10, r10, r11 /* add it */
+153: mfspr r11, SPRN_SPRG_SCRATCH1 /* load r11 from SPRN_SPRG_SCRATCH1 */
+ add r10, r10, r11 /* add it */
+ mfctr r11 /* restore r11 */
+ b 151b
+154: mfspr r11, SPRN_SPRG_SCRATCH0 /* load r10 from SPRN_SPRG_SCRATCH0 */
+ add r10, r10, r11 /* add it */
mfctr r11 /* restore r11 */
b 151b
#endif
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 0bb5918faaaf..1f7d84e2e8b2 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -293,7 +293,7 @@ out:
/*
* Handle single-step exceptions following a DABR hit.
*/
-int __kprobes single_step_dabr_instruction(struct die_args *args)
+static int __kprobes single_step_dabr_instruction(struct die_args *args)
{
struct pt_regs *regs = args->regs;
struct perf_event *bp = NULL;
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 1114d13ac19f..ac86c53e2542 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -55,7 +55,7 @@ static struct device ibmebus_bus_device = { /* fake "parent" device */
struct bus_type ibmebus_bus_type;
/* These devices will automatically be added to the bus during init */
-static struct of_device_id __initdata ibmebus_matches[] = {
+static const struct of_device_id ibmebus_matches[] __initconst = {
{ .compatible = "IBM,lhca" },
{ .compatible = "IBM,lhea" },
{},
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index be05841396cf..c0754bbf8118 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -73,7 +73,7 @@ _GLOBAL(power7_powersave_common)
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
- cmpwi cr0,r0,0
+ andi. r0,r0,~PACA_IRQ_HARD_DIS@l
beq 1f
cmpwi cr0,r4,0
beq 1f
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 4c5891de162e..8eb857f216c1 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -444,13 +444,13 @@ void migrate_irqs(void)
cpumask_and(mask, data->affinity, map);
if (cpumask_any(mask) >= nr_cpu_ids) {
- printk("Breaking affinity for irq %i\n", irq);
+ pr_warn("Breaking affinity for irq %i\n", irq);
cpumask_copy(mask, map);
}
if (chip->irq_set_affinity)
chip->irq_set_affinity(data, mask, true);
else if (desc->action && !(warned++))
- printk("Cannot set affinity for irq %i\n", irq);
+ pr_err("Cannot set affinity for irq %i\n", irq);
}
free_cpumask_var(mask);
@@ -470,7 +470,7 @@ static inline void check_stack_overflow(void)
/* check for stack overflow: is there less than 2KB free? */
if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
- printk("do_IRQ: stack overflow: %ld\n",
+ pr_err("do_IRQ: stack overflow: %ld\n",
sp - sizeof(struct thread_info));
dump_stack();
}
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 936258881c98..7b750c4ed5c7 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -35,7 +35,7 @@ static struct legacy_serial_info {
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
-static struct of_device_id legacy_serial_parents[] __initdata = {
+static const struct of_device_id legacy_serial_parents[] __initconst = {
{.type = "soc",},
{.type = "tsi-bridge",},
{.type = "opb", },
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index 6cff040bf456..c94d2e018d84 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -15,6 +15,9 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/moduleloader.h>
#include <linux/elf.h>
@@ -28,12 +31,6 @@
#include <linux/sort.h>
#include <asm/setup.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
/* Count how many different relocations (different symbol, different
addend) */
static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
@@ -121,8 +118,8 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
continue;
if (sechdrs[i].sh_type == SHT_RELA) {
- DEBUGP("Found relocations in section %u\n", i);
- DEBUGP("Ptr: %p. Number: %u\n",
+ pr_debug("Found relocations in section %u\n", i);
+ pr_debug("Ptr: %p. Number: %u\n",
(void *)hdr + sechdrs[i].sh_offset,
sechdrs[i].sh_size / sizeof(Elf32_Rela));
@@ -161,7 +158,7 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
me->arch.core_plt_section = i;
}
if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
- printk("Module doesn't contain .plt or .init.plt sections.\n");
+ pr_err("Module doesn't contain .plt or .init.plt sections.\n");
return -ENOEXEC;
}
@@ -189,7 +186,7 @@ static uint32_t do_plt_call(void *location,
{
struct ppc_plt_entry *entry;
- DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
+ pr_debug("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
/* Init, or core PLT? */
if (location >= mod->module_core
&& location < mod->module_core + mod->core_size)
@@ -208,7 +205,7 @@ static uint32_t do_plt_call(void *location,
entry->jump[2] = 0x7d8903a6; /* mtctr r12 */
entry->jump[3] = 0x4e800420; /* bctr */
- DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);
+ pr_debug("Initialized plt for 0x%x at %p\n", val, entry);
return (uint32_t)entry;
}
@@ -224,7 +221,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
uint32_t *location;
uint32_t value;
- DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
+ pr_debug("Applying ADD relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
/* This is where to make the change */
@@ -268,17 +265,17 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
sechdrs, module);
/* Only replace bits 2 through 26 */
- DEBUGP("REL24 value = %08X. location = %08X\n",
+ pr_debug("REL24 value = %08X. location = %08X\n",
value, (uint32_t)location);
- DEBUGP("Location before: %08X.\n",
+ pr_debug("Location before: %08X.\n",
*(uint32_t *)location);
*(uint32_t *)location
= (*(uint32_t *)location & ~0x03fffffc)
| ((value - (uint32_t)location)
& 0x03fffffc);
- DEBUGP("Location after: %08X.\n",
+ pr_debug("Location after: %08X.\n",
*(uint32_t *)location);
- DEBUGP("ie. jump to %08X+%08X = %08X\n",
+ pr_debug("ie. jump to %08X+%08X = %08X\n",
*(uint32_t *)location & 0x03fffffc,
(uint32_t)location,
(*(uint32_t *)location & 0x03fffffc)
@@ -291,7 +288,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
break;
default:
- printk("%s: unknown ADD relocation: %u\n",
+ pr_err("%s: unknown ADD relocation: %u\n",
module->name,
ELF32_R_TYPE(rela[i].r_info));
return -ENOEXEC;
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index d807ee626af9..68384514506b 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -15,6 +15,9 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/elf.h>
#include <linux/moduleloader.h>
@@ -36,11 +39,6 @@
Using a magic allocator which places modules within 32MB solves
this, and makes other things simpler. Anton?
--RR. */
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
#if defined(_CALL_ELF) && _CALL_ELF == 2
#define R2_STACK_OFFSET 24
@@ -279,8 +277,8 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
/* Every relocated section... */
for (i = 1; i < hdr->e_shnum; i++) {
if (sechdrs[i].sh_type == SHT_RELA) {
- DEBUGP("Found relocations in section %u\n", i);
- DEBUGP("Ptr: %p. Number: %lu\n",
+ pr_debug("Found relocations in section %u\n", i);
+ pr_debug("Ptr: %p. Number: %Lu\n",
(void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size / sizeof(Elf64_Rela));
@@ -304,7 +302,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
relocs++;
#endif
- DEBUGP("Looks like a total of %lu stubs, max\n", relocs);
+ pr_debug("Looks like a total of %lu stubs, max\n", relocs);
return relocs * sizeof(struct ppc64_stub_entry);
}
@@ -390,7 +388,7 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
}
if (!me->arch.stubs_section) {
- printk("%s: doesn't contain .stubs.\n", me->name);
+ pr_err("%s: doesn't contain .stubs.\n", me->name);
return -ENOEXEC;
}
@@ -434,11 +432,11 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
/* Stub uses address relative to r2. */
reladdr = (unsigned long)entry - my_r2(sechdrs, me);
if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
- printk("%s: Address %p of stub out of range of %p.\n",
+ pr_err("%s: Address %p of stub out of range of %p.\n",
me->name, (void *)reladdr, (void *)my_r2);
return 0;
}
- DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr);
+ pr_debug("Stub %p get data from reladdr %li\n", entry, reladdr);
entry->jump[0] |= PPC_HA(reladdr);
entry->jump[1] |= PPC_LO(reladdr);
@@ -477,7 +475,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
static int restore_r2(u32 *instruction, struct module *me)
{
if (*instruction != PPC_INST_NOP) {
- printk("%s: Expect noop after relocate, got %08x\n",
+ pr_err("%s: Expect noop after relocate, got %08x\n",
me->name, *instruction);
return 0;
}
@@ -498,7 +496,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
unsigned long *location;
unsigned long value;
- DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
+ pr_debug("Applying ADD relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
/* First time we're called, we can fix up .TOC. */
@@ -519,7 +517,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
+ ELF64_R_SYM(rela[i].r_info);
- DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n",
+ pr_debug("RELOC at %p: %li-type as %s (0x%lx) + %li\n",
location, (long)ELF64_R_TYPE(rela[i].r_info),
strtab + sym->st_name, (unsigned long)sym->st_value,
(long)rela[i].r_addend);
@@ -546,7 +544,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if (value + 0x8000 > 0xffff) {
- printk("%s: bad TOC16 relocation (%lu)\n",
+ pr_err("%s: bad TOC16 relocation (0x%lx)\n",
me->name, value);
return -ENOEXEC;
}
@@ -567,7 +565,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
- printk("%s: bad TOC16_DS relocation (%lu)\n",
+ pr_err("%s: bad TOC16_DS relocation (0x%lx)\n",
me->name, value);
return -ENOEXEC;
}
@@ -580,7 +578,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0) {
- printk("%s: bad TOC16_LO_DS relocation (%lu)\n",
+ pr_err("%s: bad TOC16_LO_DS relocation (0x%lx)\n",
me->name, value);
return -ENOEXEC;
}
@@ -613,7 +611,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
/* Convert value to relative */
value -= (unsigned long)location;
if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){
- printk("%s: REL24 %li out of range!\n",
+ pr_err("%s: REL24 %li out of range!\n",
me->name, (long int)value);
return -ENOEXEC;
}
@@ -655,7 +653,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
break;
default:
- printk("%s: Unknown ADD relocation: %lu\n",
+ pr_err("%s: Unknown ADD relocation: %lu\n",
me->name,
(unsigned long)ELF64_R_TYPE(rela[i].r_info));
return -ENOEXEC;
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 28b898e68185..34f7c9b7cd96 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -567,7 +567,7 @@ static int __init nvram_init(void)
return rc;
}
-void __exit nvram_cleanup(void)
+static void __exit nvram_cleanup(void)
{
misc_deregister( &nvram_dev );
}
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index a7b743076720..f87bc1b4bdda 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -97,7 +97,7 @@ static int of_pci_phb_probe(struct platform_device *dev)
return 0;
}
-static struct of_device_id of_pci_phb_ids[] = {
+static const struct of_device_id of_pci_phb_ids[] = {
{ .type = "pci", },
{ .type = "pcix", },
{ .type = "pcie", },
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index b2814e23e1ed..bd70a51d5747 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1140,7 +1140,7 @@ static int reparent_resources(struct resource *parent,
* as well.
*/
-void pcibios_allocate_bus_resources(struct pci_bus *bus)
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
{
struct pci_bus *b;
int i;
@@ -1561,7 +1561,6 @@ EARLY_PCI_OP(write, byte, u8)
EARLY_PCI_OP(write, word, u16)
EARLY_PCI_OP(write, dword, u32)
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
int early_find_capability(struct pci_controller *hose, int bus, int devfn,
int cap)
{
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 44562aa97f16..e6245e9c7d8d 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -38,7 +38,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
* @addr0: value of 1st cell of a device tree PCI address.
* @bridge: Set this flag if the address is from a bridge 'ranges' property
*/
-unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
{
unsigned int flags = 0;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 48d17d6fca5b..c4dfff6c2719 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -1,207 +1,41 @@
-#include <linux/export.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/elfcore.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <linux/vt_kern.h>
-#include <linux/nvram.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
+#include <linux/ftrace.h>
+#include <linux/mm.h>
-#include <asm/page.h>
#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <linux/atomic.h>
-#include <asm/checksum.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <asm/pmac_feature.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/nvram.h>
-#include <asm/mmu_context.h>
-#include <asm/backlight.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/btext.h>
-#include <asm/div64.h>
-#include <asm/signal.h>
-#include <asm/dcr.h>
-#include <asm/ftrace.h>
#include <asm/switch_to.h>
+#include <asm/cacheflush.h>
#include <asm/epapr_hcalls.h>
-#ifdef CONFIG_PPC32
-extern void transfer_to_handler(void);
-extern void do_IRQ(struct pt_regs *regs);
-extern void machine_check_exception(struct pt_regs *regs);
-extern void alignment_exception(struct pt_regs *regs);
-extern void program_check_exception(struct pt_regs *regs);
-extern void single_step_exception(struct pt_regs *regs);
-extern int sys_sigreturn(struct pt_regs *regs);
+EXPORT_SYMBOL(flush_dcache_range);
+EXPORT_SYMBOL(flush_icache_range);
-EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
-EXPORT_SYMBOL(DMA_MODE_READ);
-EXPORT_SYMBOL(DMA_MODE_WRITE);
+EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(transfer_to_handler);
-EXPORT_SYMBOL(do_IRQ);
-EXPORT_SYMBOL(machine_check_exception);
-EXPORT_SYMBOL(alignment_exception);
-EXPORT_SYMBOL(program_check_exception);
-EXPORT_SYMBOL(single_step_exception);
-EXPORT_SYMBOL(sys_sigreturn);
-#endif
+long long __bswapdi2(long long);
+EXPORT_SYMBOL(__bswapdi2);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(_mcount);
#endif
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-#ifndef CONFIG_GENERIC_CSUM
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
-#endif
-
-EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(copy_page);
-
-#if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
-EXPORT_SYMBOL(isa_io_base);
-EXPORT_SYMBOL(isa_mem_base);
-EXPORT_SYMBOL(pci_dram_offset);
-#endif /* CONFIG_PCI */
-
-EXPORT_SYMBOL(start_thread);
-
#ifdef CONFIG_PPC_FPU
EXPORT_SYMBOL(giveup_fpu);
EXPORT_SYMBOL(load_fp_state);
EXPORT_SYMBOL(store_fp_state);
#endif
+
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL(giveup_altivec);
EXPORT_SYMBOL(load_vr_state);
EXPORT_SYMBOL(store_vr_state);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-EXPORT_SYMBOL(giveup_vsx);
-EXPORT_SYMBOL_GPL(__giveup_vsx);
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-EXPORT_SYMBOL(giveup_spe);
-#endif /* CONFIG_SPE */
-
-#ifndef CONFIG_PPC64
-EXPORT_SYMBOL(flush_instruction_cache);
#endif
-EXPORT_SYMBOL(flush_dcache_range);
-EXPORT_SYMBOL(flush_icache_range);
-#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(smp_hw_index);
-#endif
-#endif
-
-#ifdef CONFIG_ADB
-EXPORT_SYMBOL(adb_request);
-EXPORT_SYMBOL(adb_register);
-EXPORT_SYMBOL(adb_unregister);
-EXPORT_SYMBOL(adb_poll);
-EXPORT_SYMBOL(adb_try_handler_change);
-#endif /* CONFIG_ADB */
-#ifdef CONFIG_ADB_CUDA
-EXPORT_SYMBOL(cuda_request);
-EXPORT_SYMBOL(cuda_poll);
-#endif /* CONFIG_ADB_CUDA */
-EXPORT_SYMBOL(to_tm);
-
-#ifdef CONFIG_PPC32
-long long __ashrdi3(long long, int);
-long long __ashldi3(long long, int);
-long long __lshrdi3(long long, int);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-int __ucmpdi2(unsigned long long, unsigned long long);
-EXPORT_SYMBOL(__ucmpdi2);
-int __cmpdi2(long long, long long);
-EXPORT_SYMBOL(__cmpdi2);
-#endif
-long long __bswapdi2(long long);
-EXPORT_SYMBOL(__bswapdi2);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memchr);
-
-#if defined(CONFIG_FB_VGA16_MODULE)
-EXPORT_SYMBOL(screen_info);
-#endif
-
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(cacheable_memcpy);
-EXPORT_SYMBOL(cacheable_memzero);
-#endif
-
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(switch_mmu_context);
-#endif
-
-#ifdef CONFIG_PPC_STD_MMU_32
-extern long mol_trampoline;
-EXPORT_SYMBOL(mol_trampoline); /* For MOL */
-EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
-#ifdef CONFIG_SMP
-extern int mmu_hash_lock;
-EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
-#endif /* CONFIG_SMP */
-extern long *intercept_table;
-EXPORT_SYMBOL(intercept_table);
-#endif /* CONFIG_PPC_STD_MMU_32 */
-#ifdef CONFIG_PPC_DCR_NATIVE
-EXPORT_SYMBOL(__mtdcr);
-EXPORT_SYMBOL(__mfdcr);
-#endif
-EXPORT_SYMBOL(empty_zero_page);
-
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(__arch_hweight8);
-EXPORT_SYMBOL(__arch_hweight16);
-EXPORT_SYMBOL(__arch_hweight32);
-EXPORT_SYMBOL(__arch_hweight64);
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL_GPL(__giveup_vsx);
#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-EXPORT_SYMBOL_GPL(mmu_psize_defs);
+#ifdef CONFIG_SPE
+EXPORT_SYMBOL(giveup_spe);
#endif
#ifdef CONFIG_EPAPR_PARAVIRT
diff --git a/arch/powerpc/kernel/ppc_ksyms_32.c b/arch/powerpc/kernel/ppc_ksyms_32.c
new file mode 100644
index 000000000000..30ddd8a24eee
--- /dev/null
+++ b/arch/powerpc/kernel/ppc_ksyms_32.c
@@ -0,0 +1,61 @@
+#include <linux/export.h>
+#include <linux/smp.h>
+
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/time.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/dcr.h>
+
+EXPORT_SYMBOL(clear_pages);
+EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
+EXPORT_SYMBOL(DMA_MODE_READ);
+EXPORT_SYMBOL(DMA_MODE_WRITE);
+
+#if defined(CONFIG_PCI)
+EXPORT_SYMBOL(isa_io_base);
+EXPORT_SYMBOL(isa_mem_base);
+EXPORT_SYMBOL(pci_dram_offset);
+#endif
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(smp_hw_index);
+#endif
+
+long long __ashrdi3(long long, int);
+long long __ashldi3(long long, int);
+long long __lshrdi3(long long, int);
+int __ucmpdi2(unsigned long long, unsigned long long);
+int __cmpdi2(long long, long long);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__cmpdi2);
+
+EXPORT_SYMBOL(timer_interrupt);
+EXPORT_SYMBOL(tb_ticks_per_jiffy);
+
+EXPORT_SYMBOL(switch_mmu_context);
+
+#ifdef CONFIG_PPC_STD_MMU_32
+extern long mol_trampoline;
+EXPORT_SYMBOL(mol_trampoline); /* For MOL */
+EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
+#ifdef CONFIG_SMP
+extern int mmu_hash_lock;
+EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
+#endif /* CONFIG_SMP */
+extern long *intercept_table;
+EXPORT_SYMBOL(intercept_table);
+#endif /* CONFIG_PPC_STD_MMU_32 */
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+EXPORT_SYMBOL(__mtdcr);
+EXPORT_SYMBOL(__mfdcr);
+#endif
+
+EXPORT_SYMBOL(flush_instruction_cache);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index bf44ae962ab8..aa1df89c8b2a 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -228,6 +228,7 @@ void giveup_vsx(struct task_struct *tsk)
giveup_altivec_maybe_transactional(tsk);
__giveup_vsx(tsk);
}
+EXPORT_SYMBOL(giveup_vsx);
void flush_vsx_to_thread(struct task_struct *tsk)
{
@@ -1316,6 +1317,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
current->thread.tm_tfiar = 0;
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
}
+EXPORT_SYMBOL(start_thread);
#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \
| PR_FP_EXC_RES | PR_FP_EXC_INV)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4e139f8a69ef..099f27e6d1b0 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -386,8 +386,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
return 0;
}
-int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
- int depth, void *data)
+static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
+ const char *uname,
+ int depth, void *data)
{
const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
@@ -641,6 +642,10 @@ void __init early_init_devtree(void *params)
DBG(" -> early_init_devtree(%p)\n", params);
+ /* Too early to BUG_ON(), do it by hand */
+ if (!early_init_dt_verify(params))
+ panic("BUG: Failed verifying flat device tree, bad version?");
+
/* Setup flat device-tree pointer */
initial_boot_params = params;
@@ -663,14 +668,12 @@ void __init early_init_devtree(void *params)
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
+ of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
- /* Save command line for /proc/cmdline and then parse parameters */
- strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
/* make sure we've parsed cmdline for mem= before this */
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index fe8e54b9ef7d..12640f7e726b 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -50,24 +50,14 @@ do
done
# ignore register save/restore funcitons
- if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+ case $UNDEF in
+ _restgpr_*|_restgpr0_*|_rest32gpr_*)
OK=1
- fi
- if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
- OK=1
- fi
- if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
- OK=1
- fi
- if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+ ;;
+ _savegpr_*|_savegpr0_*|_save32gpr_*)
OK=1
- fi
- if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
- OK=1
- fi
- if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
- OK=1
- fi
+ ;;
+ esac
if [ $OK -eq 0 ]; then
ERROR=1
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 2e3d2bf536c5..cdb404ea3468 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -932,7 +932,7 @@ void ptrace_triggered(struct perf_event *bp,
}
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
unsigned long data)
{
#ifdef CONFIG_HAVE_HW_BREAKPOINT
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index e736387fee6a..5a2c049c1c61 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -286,7 +286,7 @@ static void prrn_work_fn(struct work_struct *work)
static DECLARE_WORK(prrn_work, prrn_work_fn);
-void prrn_schedule_update(u32 scope)
+static void prrn_schedule_update(u32 scope)
{
flush_work(&prrn_work);
prrn_update_scope = scope;
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1b0e26013a62..1362cd62b3fa 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -81,8 +81,6 @@ EXPORT_SYMBOL_GPL(boot_cpuid);
unsigned long klimit = (unsigned long) _end;
-char cmd_line[COMMAND_LINE_SIZE];
-
/*
* This still seems to be needed... -- paulus
*/
@@ -94,6 +92,9 @@ struct screen_info screen_info = {
.orig_video_isVGA = 1,
.orig_video_points = 16
};
+#if defined(CONFIG_FB_VGA16_MODULE)
+EXPORT_SYMBOL(screen_info);
+#endif
/* Variables required to store legacy IO irq routing */
int of_i8042_kbd_irq;
@@ -382,7 +383,7 @@ void __init check_for_initrd(void)
initrd_start = initrd_end = 0;
if (initrd_start)
- printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
+ pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
DBG(" <- check_for_initrd()\n");
#endif /* CONFIG_BLK_DEV_INITRD */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ea4fda60e57b..07831ed0d9ef 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -268,7 +268,7 @@ static void __init exc_lvl_early_init(void)
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
- *cmdline_p = cmd_line;
+ *cmdline_p = boot_command_line;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 75d62d63fe68..cd07d79ad21c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -525,21 +525,31 @@ void __init setup_system(void)
printk("Starting Linux PPC64 %s\n", init_utsname()->version);
printk("-----------------------------------------------------\n");
- printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
- printk("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size());
+ printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
+ printk("phys_mem_size = 0x%llx\n", memblock_phys_mem_size());
+
if (ppc64_caches.dline_size != 0x80)
- printk("ppc64_caches.dcache_line_size = 0x%x\n",
- ppc64_caches.dline_size);
+ printk("dcache_line_size = 0x%x\n", ppc64_caches.dline_size);
if (ppc64_caches.iline_size != 0x80)
- printk("ppc64_caches.icache_line_size = 0x%x\n",
- ppc64_caches.iline_size);
+ printk("icache_line_size = 0x%x\n", ppc64_caches.iline_size);
+
+ printk("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
+ printk(" possible = 0x%016lx\n", CPU_FTRS_POSSIBLE);
+ printk(" always = 0x%016lx\n", CPU_FTRS_ALWAYS);
+ printk("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features,
+ cur_cpu_spec->cpu_user_features2);
+ printk("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
+ printk("firmware_features = 0x%016lx\n", powerpc_firmware_features);
+
#ifdef CONFIG_PPC_STD_MMU_64
if (htab_address)
- printk("htab_address = 0x%p\n", htab_address);
- printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
-#endif /* CONFIG_PPC_STD_MMU_64 */
+ printk("htab_address = 0x%p\n", htab_address);
+
+ printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
+#endif
+
if (PHYSICAL_START > 0)
- printk("physical_start = 0x%llx\n",
+ printk("physical_start = 0x%llx\n",
(unsigned long long)PHYSICAL_START);
printk("-----------------------------------------------------\n");
@@ -657,7 +667,7 @@ void __init setup_arch(char **cmdline_p)
{
ppc64_boot_msg(0x12, "Setup Arch");
- *cmdline_p = cmd_line;
+ *cmdline_p = boot_command_line;
/*
* Set cache line size based on type of cpu as a default.
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index a0738af4aba6..71e186d5f331 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -52,6 +52,7 @@
#endif
#include <asm/vdso.h>
#include <asm/debug.h>
+#include <asm/kexec.h>
#ifdef DEBUG
#include <asm/udbg.h>
@@ -379,8 +380,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
/*
* numa_node_id() works after this.
*/
- set_cpu_numa_node(cpu, numa_cpu_lookup_table[cpu]);
- set_cpu_numa_mem(cpu, local_memory_node(numa_cpu_lookup_table[cpu]));
+ if (cpu_present(cpu)) {
+ set_cpu_numa_node(cpu, numa_cpu_lookup_table[cpu]);
+ set_cpu_numa_mem(cpu,
+ local_memory_node(numa_cpu_lookup_table[cpu]));
+ }
}
cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
@@ -728,6 +732,9 @@ void start_secondary(void *unused)
}
traverse_core_siblings(cpu, true);
+ set_numa_node(numa_cpu_lookup_table[cpu]);
+ set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
smp_wmb();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 368ab374d33c..7505599c2593 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -479,7 +479,7 @@ void arch_irq_work_raise(void)
#endif /* CONFIG_IRQ_WORK */
-void __timer_interrupt(void)
+static void __timer_interrupt(void)
{
struct pt_regs *regs = get_irq_regs();
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
@@ -643,7 +643,7 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
return found;
}
-void start_cpu_decrementer(void)
+static void start_cpu_decrementer(void)
{
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
/* Clear any pending timer interrupts */
@@ -1024,6 +1024,7 @@ void to_tm(int tim, struct rtc_time * tm)
*/
GregorianDay(tm);
}
+EXPORT_SYMBOL(to_tm);
/*
* Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
OpenPOWER on IntegriCloud