summaryrefslogtreecommitdiffstats
path: root/arch/mips/mti-malta/malta-smtc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/mti-malta/malta-smtc.c')
-rw-r--r--arch/mips/mti-malta/malta-smtc.c162
1 files changed, 0 insertions, 162 deletions
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
deleted file mode 100644
index c4849904f013..000000000000
--- a/arch/mips/mti-malta/malta-smtc.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Malta Platform-specific hooks for SMP operation
- */
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
-
-/* VPE/SMP Prototype implements platform interfaces directly */
-
-/*
- * Cause the specified action to be performed on a targeted "CPU"
- */
-
-static void msmtc_send_ipi_single(int cpu, unsigned int action)
-{
- /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
- smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-}
-
-static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu(i, mask)
- msmtc_send_ipi_single(i, action);
-}
-
-/*
- * Post-config but pre-boot cleanup entry point
- */
-static void msmtc_init_secondary(void)
-{
- int myvpe;
-
- /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
- myvpe = read_c0_tcbind() & TCBIND_CURVPE;
- if (myvpe != 0) {
- /* Ideally, this should be done only once per VPE, but... */
- clear_c0_status(ST0_IM);
- set_c0_status((0x100 << cp0_compare_irq)
- | (0x100 << MIPS_CPU_IPI_IRQ));
- if (cp0_perfcount_irq >= 0)
- set_c0_status(0x100 << cp0_perfcount_irq);
- }
-
- smtc_init_secondary();
-}
-
-/*
- * Platform "CPU" startup hook
- */
-static void msmtc_boot_secondary(int cpu, struct task_struct *idle)
-{
- smtc_boot_secondary(cpu, idle);
-}
-
-/*
- * SMP initialization finalization entry point
- */
-static void msmtc_smp_finish(void)
-{
- smtc_smp_finish();
-}
-
-/*
- * Hook for after all CPUs are online
- */
-
-static void msmtc_cpus_done(void)
-{
-}
-
-/*
- * Platform SMP pre-initialization
- *
- * As noted above, we can assume a single CPU for now
- * but it may be multithreaded.
- */
-
-static void __init msmtc_smp_setup(void)
-{
- /*
- * we won't get the definitive value until
- * we've run smtc_prepare_cpus later, but
- * we would appear to need an upper bound now.
- */
- smp_num_siblings = smtc_build_cpu_map(0);
-}
-
-static void __init msmtc_prepare_cpus(unsigned int max_cpus)
-{
- smtc_prepare_cpus(max_cpus);
-}
-
-struct plat_smp_ops msmtc_smp_ops = {
- .send_ipi_single = msmtc_send_ipi_single,
- .send_ipi_mask = msmtc_send_ipi_mask,
- .init_secondary = msmtc_init_secondary,
- .smp_finish = msmtc_smp_finish,
- .cpus_done = msmtc_cpus_done,
- .boot_secondary = msmtc_boot_secondary,
- .smp_setup = msmtc_smp_setup,
- .prepare_cpus = msmtc_prepare_cpus,
-};
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * IRQ affinity hook
- */
-
-
-int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
- bool force)
-{
- cpumask_t tmask;
- int cpu = 0;
- void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff);
-
- /*
- * On the legacy Malta development board, all I/O interrupts
- * are routed through the 8259 and combined in a single signal
- * to the CPU daughterboard, and on the CoreFPGA2/3 34K models,
- * that signal is brought to IP2 of both VPEs. To avoid racing
- * concurrent interrupt service events, IP2 is enabled only on
- * one VPE, by convention VPE0. So long as no bits are ever
- * cleared in the affinity mask, there will never be any
- * interrupt forwarding. But as soon as a program or operator
- * sets affinity for one of the related IRQs, we need to make
- * sure that we don't ever try to forward across the VPE boundary,
- * at least not until we engineer a system where the interrupt
- * _ack() or _end() function can somehow know that it corresponds
- * to an interrupt taken on another VPE, and perform the appropriate
- * restoration of Status.IM state using MFTR/MTTR instead of the
- * normal local behavior. We also ensure that no attempt will
- * be made to forward to an offline "CPU".
- */
-
- cpumask_copy(&tmask, affinity);
- for_each_cpu(cpu, affinity) {
- if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu))
- cpu_clear(cpu, tmask);
- }
- cpumask_copy(d->affinity, &tmask);
-
- if (cpus_empty(tmask))
- /*
- * We could restore a default mask here, but the
- * runtime code can anyway deal with the null set
- */
- printk(KERN_WARNING
- "IRQ affinity leaves no legal CPU for IRQ %d\n", d->irq);
-
- /* Do any generic SMTC IRQ affinity setup */
- smtc_set_irq_affinity(d->irq, tmask);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
OpenPOWER on IntegriCloud