diff options
Diffstat (limited to 'arch/mips/include/asm/mach-au1x00')
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000.h | 198 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000_dma.h | 10 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1100_mmc.h | 2 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 16 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 22 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1xxx_psc.h | 8 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 20 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/gpio-au1300.h | 2 |
8 files changed, 139 insertions, 139 deletions
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 569828d3ccab..3e11a468cdf8 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -349,7 +349,7 @@ extern void au1300_vss_block_control(int block, int enable); #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) -#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST /* Au1300-style (GPIC): 1 controller with up to 128 sources */ #define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) @@ -589,7 +589,7 @@ enum soc_au1550_ints { AU1550_GPIO14_INT, AU1550_GPIO15_INT, AU1550_GPIO200_INT, - AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ + AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ AU1550_GPIO16_INT, AU1550_GPIO17_INT, AU1550_GPIO20_INT, @@ -603,7 +603,7 @@ enum soc_au1550_ints { AU1550_GPIO28_INT, AU1550_GPIO206_INT, AU1550_GPIO207_INT, - AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ + AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ }; enum soc_au1200_ints { @@ -636,7 +636,7 @@ enum soc_au1200_ints { AU1200_GPIO205_INT, AU1200_GPIO206_INT, AU1200_GPIO207_INT, - AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ + AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ AU1200_USB_INT, AU1200_LCD_INT, AU1200_MAE_BOTH_INT, @@ -823,7 +823,7 @@ enum soc_au1200_ints { #define GPIC_GPIO_TO_BIT(gpio) \ (1 << ((gpio) & 0x1f)) -#define GPIC_GPIO_BANKOFF(gpio) \ +#define GPIC_GPIO_BANKOFF(gpio) \ (((gpio) >> 5) * 4) /* Pin Control bits: who owns the pin, what does it do */ @@ -958,32 +958,32 @@ enum soc_au1200_ints { #define MEM_STSTAT 0xB4001104 #define MEM_STNAND_CMD 0x0 -#define MEM_STNAND_ADDR 0x4 -#define MEM_STNAND_DATA 0x20 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1 << 23) -# define SYS_CNTRL_T1S (1 << 20) -# define SYS_CNTRL_M21 (1 << 19) -# define SYS_CNTRL_M11 (1 << 18) -# define SYS_CNTRL_M01 (1 << 17) -# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) # define SYS_CNTRL_BP (1 << 14) -# define SYS_CNTRL_EN1 (1 << 13) -# define SYS_CNTRL_BT1 (1 << 12) -# define SYS_CNTRL_EN0 (1 << 11) -# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) # define SYS_CNTRL_E0 (1 << 8) -# define SYS_CNTRL_E0S (1 << 7) -# define SYS_CNTRL_32S (1 << 5) -# define SYS_CNTRL_T0S (1 << 4) -# define SYS_CNTRL_M20 (1 << 3) -# define SYS_CNTRL_M10 (1 << 2) -# define SYS_CNTRL_M00 (1 << 1) -# define SYS_CNTRL_C0S (1 << 0) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ #define SYS_TOYTRIM (SYS_BASE + 0) @@ -1003,33 +1003,33 @@ enum soc_au1200_ints { /* I2S Controller */ #define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK 0xffffff +# define I2S_DATA_MASK 0xffffff #define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1 << 25) -# define I2S_CONFIG_XO (1 << 24) -# define I2S_CONFIG_RU (1 << 23) -# define I2S_CONFIG_RO (1 << 22) -# define I2S_CONFIG_TR (1 << 21) -# define I2S_CONFIG_TE (1 << 20) -# define I2S_CONFIG_TF (1 << 19) -# define I2S_CONFIG_RR (1 << 18) -# define I2S_CONFIG_RE (1 << 17) -# define I2S_CONFIG_RF (1 << 16) -# define I2S_CONFIG_PD (1 << 11) -# define I2S_CONFIG_LB (1 << 10) -# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) # define I2S_CONFIG_FM_BIT 7 # define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1 << 6) -# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) # define I2S_CONFIG_SZ_BIT 0 # define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) #define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_D (1 << 1) # define I2S_CONTROL_CE (1 << 0) @@ -1037,16 +1037,16 @@ enum soc_au1200_ints { /* 4 byte offsets from AU1000_ETH_BASE */ #define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1 << 2) -# define MAC_TX_ENABLE (1 << 3) -# define MAC_DEF_CHECK (1 << 5) -# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) # define MAC_AUTO_PAD (1 << 8) # define MAC_DISABLE_RETRY (1 << 10) # define MAC_DISABLE_BCAST (1 << 11) # define MAC_LATE_COL (1 << 12) -# define MAC_HASH_MODE (1 << 13) -# define MAC_HASH_ONLY (1 << 15) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) # define MAC_PASS_ALL (1 << 16) # define MAC_INVERSE_FILTER (1 << 17) # define MAC_PROMISCUOUS (1 << 18) @@ -1083,9 +1083,9 @@ enum soc_au1200_ints { # define MAC_EN_RESET0 (1 << 1) # define MAC_EN_TOSS (0 << 2) # define MAC_EN_CACHEABLE (1 << 3) -# define MAC_EN_RESET1 (1 << 4) -# define MAC_EN_RESET2 (1 << 5) -# define MAC_DMA_RESET (1 << 6) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ @@ -1095,7 +1095,7 @@ enum soc_au1200_ints { #define MAC_TX_BUFF0_STATUS 0x0 # define TX_FRAME_ABORTED (1 << 0) # define TX_JAB_TIMEOUT (1 << 1) -# define TX_NO_CARRIER (1 << 2) +# define TX_NO_CARRIER (1 << 2) # define TX_LOSS_CARRIER (1 << 3) # define TX_EXC_DEF (1 << 4) # define TX_LATE_COLL_ABORT (1 << 5) @@ -1106,7 +1106,7 @@ enum soc_au1200_ints { # define TX_COLL_CNT_MASK (0xF << 10) # define TX_PKT_RETRY (1 << 31) #define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1 << 0) +# define TX_DMA_ENABLE (1 << 0) # define TX_T_DONE (1 << 1) # define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) #define MAC_TX_BUFF0_LEN 0x8 @@ -1125,7 +1125,7 @@ enum soc_au1200_ints { /* offsets from MAC_RX_RING_ADDR */ #define MAC_RX_BUFF0_STATUS 0x0 # define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1 << 14) +# define RX_WDOG_TIMER (1 << 14) # define RX_RUNT (1 << 15) # define RX_OVERLEN (1 << 16) # define RX_COLL (1 << 17) @@ -1148,7 +1148,7 @@ enum soc_au1200_ints { RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) #define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1 << 0) +# define RX_DMA_ENABLE (1 << 0) # define RX_T_DONE (1 << 1) # define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) # define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) @@ -1173,34 +1173,34 @@ enum soc_au1200_ints { /* SSIO */ #define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1 << 4) -# define SSI_STATUS_OF (1 << 3) -# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) # define SSI_STATUS_D (1 << 1) # define SSI_STATUS_B (1 << 0) #define SSI0_INT 0xB1600004 # define SSI_INT_OI (1 << 3) # define SSI_INT_UI (1 << 2) # define SSI_INT_DI (1 << 1) -#define SSI0_INT_ENABLE 0xB1600008 +#define SSI0_INT_ENABLE 0xB1600008 # define SSI_INTE_OIE (1 << 3) # define SSI_INTE_UIE (1 << 2) # define SSI_INTE_DIE (1 << 1) #define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1 << 24) -# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) # define SSI_CONFIG_ALEN_BIT 20 # define SSI_CONFIG_ALEN_MASK (0x7 << 20) # define SSI_CONFIG_DLEN_BIT 16 # define SSI_CONFIG_DLEN_MASK (0x7 << 16) -# define SSI_CONFIG_DD (1 << 11) -# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) # define SSI_CONFIG_BM_BIT 8 # define SSI_CONFIG_BM_MASK (0x3 << 8) -# define SSI_CONFIG_CE (1 << 7) -# define SSI_CONFIG_DP (1 << 6) -# define SSI_CONFIG_DL (1 << 5) -# define SSI_CONFIG_EP (1 << 4) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) #define SSI0_ADATA 0xB1600024 # define SSI_AD_D (1 << 24) # define SSI_AD_ADDR_BIT 16 @@ -1210,12 +1210,12 @@ enum soc_au1200_ints { #define SSI0_CLKDIV 0xB1600028 #define SSI0_CONTROL 0xB1600100 # define SSI_CONTROL_CD (1 << 1) -# define SSI_CONTROL_E (1 << 0) +# define SSI_CONTROL_E (1 << 0) /* SSI1 */ #define SSI1_STATUS 0xB1680000 #define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_INT_ENABLE 0xB1680008 #define SSI1_CONFIG 0xB1680020 #define SSI1_ADATA 0xB1680024 #define SSI1_CLKDIV 0xB1680028 @@ -1242,8 +1242,8 @@ enum soc_au1200_ints { #define SSI_CONFIG_AO (1 << 24) #define SSI_CONFIG_DO (1 << 23) -#define SSI_CONFIG_ALEN (7 << 20) -#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) #define SSI_CONFIG_DD (1 << 11) #define SSI_CONFIG_AD (1 << 10) #define SSI_CONFIG_BM (3 << 8) @@ -1305,7 +1305,7 @@ struct au1k_irda_platform_data { # define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ # define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ -/* Au1550 only. Redefines lots of pins */ +/* Au1550 only. Redefines lots of pins */ # define SYS_PF_PSC2_MASK (7 << 17) # define SYS_PF_PSC2_AC97 0 # define SYS_PF_PSC2_SPI 0 @@ -1322,33 +1322,33 @@ struct au1k_irda_platform_data { # define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) /* Au1200 only */ -#define SYS_PINFUNC_DMA (1 << 31) -#define SYS_PINFUNC_S0A (1 << 30) -#define SYS_PINFUNC_S1A (1 << 29) -#define SYS_PINFUNC_LP0 (1 << 28) -#define SYS_PINFUNC_LP1 (1 << 27) -#define SYS_PINFUNC_LD16 (1 << 26) -#define SYS_PINFUNC_LD8 (1 << 25) -#define SYS_PINFUNC_LD1 (1 << 24) -#define SYS_PINFUNC_LD0 (1 << 23) -#define SYS_PINFUNC_P1A (3 << 21) -#define SYS_PINFUNC_P1B (1 << 20) -#define SYS_PINFUNC_FS3 (1 << 19) -#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) #define SYS_PINFUNC_CS (1 << 16) -#define SYS_PINFUNC_CIM (1 << 15) -#define SYS_PINFUNC_P1C (1 << 14) -#define SYS_PINFUNC_U1T (1 << 12) -#define SYS_PINFUNC_U1R (1 << 11) -#define SYS_PINFUNC_EX1 (1 << 10) -#define SYS_PINFUNC_EX0 (1 << 9) -#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) #define SYS_PINFUNC_MC (1 << 7) -#define SYS_PINFUNC_S0B (1 << 6) -#define SYS_PINFUNC_S0C (1 << 5) -#define SYS_PINFUNC_P0B (1 << 4) -#define SYS_PINFUNC_U0T (1 << 3) -#define SYS_PINFUNC_S1B (1 << 2) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) /* Power Management */ #define SYS_SCRATCH0 0xB1900018 @@ -1405,7 +1405,7 @@ struct au1k_irda_platform_data { # define SYS_CS_DI2 (1 << 16) # define SYS_CS_CI2 (1 << 15) -# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_BIT 7 # define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) # define SYS_CS_DL (1 << 6) # define SYS_CS_CL (1 << 5) @@ -1554,8 +1554,8 @@ struct au1k_irda_platform_data { #define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) #define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) #define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) -#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) -#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) +#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) +#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) #define PCI_ID_DID(x) (((x) & 0xffff) << 16) #define PCI_ID_VID(x) ((x) & 0xffff) #define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h index ba4cf0e91c8b..7cedca5a305c 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -34,7 +34,7 @@ #include <linux/spinlock.h> /* And spinlocks */ #include <linux/delay.h> -#define NUM_AU1000_DMA_CHANNELS 8 +#define NUM_AU1000_DMA_CHANNELS 8 /* DMA Channel Register Offsets */ #define DMA_MODE_SET 0x00000000 @@ -47,7 +47,7 @@ #define DMA_DS (1 << 15) #define DMA_BE (1 << 13) #define DMA_DR (1 << 12) -#define DMA_TS8 (1 << 11) +#define DMA_TS8 (1 << 11) #define DMA_DW_BIT 9 #define DMA_DW_MASK (0x03 << DMA_DW_BIT) #define DMA_DW8 (0 << DMA_DW_BIT) @@ -59,9 +59,9 @@ #define DMA_GO (1 << 5) #define DMA_AB (1 << 4) #define DMA_D1 (1 << 3) -#define DMA_BE1 (1 << 2) +#define DMA_BE1 (1 << 2) #define DMA_D0 (1 << 1) -#define DMA_BE0 (1 << 0) +#define DMA_BE0 (1 << 0) #define DMA_PERIPHERAL_ADDR 0x00000008 #define DMA_BUFFER0_START 0x0000000C @@ -246,7 +246,7 @@ static inline void init_dma(unsigned int dmanr) mode |= DMA_IE; au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); + au_writel(mode, chan->io + DMA_MODE_SET); } /* diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index e221659f1bca..cadab91cee26 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -148,7 +148,7 @@ struct au1xmmc_platform_data { /* * SD_STATUS bit definitions. */ -#define SD_STATUS_DCRCW (0x00000007) +#define SD_STATUS_DCRCW (0x00000007) #define SD_STATUS_xx1 (0x00000008) #define SD_STATUS_CB (0x00000010) #define SD_STATUS_DB (0x00000020) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 217810e18361..ca8077afac4a 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -103,7 +103,7 @@ typedef volatile struct au1xxx_ddma_desc { * Lets have some SW data following -- make sure it's 32 bytes. */ u32 sw_status; - u32 sw_context; + u32 sw_context; u32 sw_reserved[6]; } au1x_ddma_desc_t; @@ -123,7 +123,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ -#define SW_STATUS_INUSE (1 << 0) +#define SW_STATUS_INUSE (1 << 0) /* Command 0 device IDs. */ #define AU1550_DSCR_CMD0_UART0_TX 0 @@ -195,8 +195,8 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1300_DSCR_CMD0_SDMS_RX0 9 #define AU1300_DSCR_CMD0_SDMS_TX1 10 #define AU1300_DSCR_CMD0_SDMS_RX1 11 -#define AU1300_DSCR_CMD0_AES_TX 12 -#define AU1300_DSCR_CMD0_AES_RX 13 +#define AU1300_DSCR_CMD0_AES_TX 12 +#define AU1300_DSCR_CMD0_AES_RX 13 #define AU1300_DSCR_CMD0_PSC0_TX 14 #define AU1300_DSCR_CMD0_PSC0_RX 15 #define AU1300_DSCR_CMD0_PSC1_TX 16 @@ -205,12 +205,12 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1300_DSCR_CMD0_PSC2_RX 19 #define AU1300_DSCR_CMD0_PSC3_TX 20 #define AU1300_DSCR_CMD0_PSC3_RX 21 -#define AU1300_DSCR_CMD0_LCD 22 +#define AU1300_DSCR_CMD0_LCD 22 #define AU1300_DSCR_CMD0_NAND_FLASH 23 #define AU1300_DSCR_CMD0_SDMS_TX2 24 #define AU1300_DSCR_CMD0_SDMS_RX2 25 #define AU1300_DSCR_CMD0_CIM_SYNC 26 -#define AU1300_DSCR_CMD0_UDMA 27 +#define AU1300_DSCR_CMD0_UDMA 27 #define AU1300_DSCR_CMD0_DMA_REQ0 28 #define AU1300_DSCR_CMD0_DMA_REQ1 29 @@ -298,7 +298,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_NXTPTR_MS (1 << 27) /* The number of DBDMA channels. */ -#define NUM_DBDMA_CHANS 16 +#define NUM_DBDMA_CHANS 16 /* * DDMA API definitions @@ -316,7 +316,7 @@ typedef struct dbdma_device_table { typedef struct dbdma_chan_config { - spinlock_t lock; + spinlock_t lock; u32 chan_flags; u32 chan_index; diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index e306384b1414..bb91b8923a49 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -1,5 +1,5 @@ /* - * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 + * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 * * BRIEF MODULE DESCRIPTION * AMD Alchemy Au1xxx IDE interface routines over the Static Bus @@ -27,14 +27,14 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE - * Interface and Linux Device Driver" Application Note. + * Interface and Linux Device Driver" Application Note. */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #define DMA_WAIT_TIMEOUT 100 -#define NUM_DESCRIPTORS PRD_ENTRIES +#define NUM_DESCRIPTORS PRD_ENTRIES #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ -#define NUM_DESCRIPTORS 2 +#define NUM_DESCRIPTORS 2 #endif #ifndef AU1XXX_ATA_RQSIZE @@ -84,8 +84,8 @@ typedef struct { #define TWP_MASK (0x3F << 14) #define TCSW_MASK (0x0F << 10) #define TPM_MASK (0x0F << 6) -#define TA_MASK (0x3F << 0) -#define TS_MASK (1 << 8) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) /* Timing parameters PIO mode 0 */ #define SBC_IDE_PIO0_TCSOE (0x04 << 29) @@ -96,7 +96,7 @@ typedef struct { #define SBC_IDE_PIO0_TWP (0x10 << 14) #define SBC_IDE_PIO0_TCSW (0x04 << 10) #define SBC_IDE_PIO0_TPM (0x00 << 6) -#define SBC_IDE_PIO0_TA (0x15 << 0) +#define SBC_IDE_PIO0_TA (0x15 << 0) /* Timing parameters PIO mode 1 */ #define SBC_IDE_PIO1_TCSOE (0x03 << 29) #define SBC_IDE_PIO1_TOECS (0x01 << 26) @@ -106,7 +106,7 @@ typedef struct { #define SBC_IDE_PIO1_TWP (0x08 << 14) #define SBC_IDE_PIO1_TCSW (0x03 << 10) #define SBC_IDE_PIO1_TPM (0x00 << 6) -#define SBC_IDE_PIO1_TA (0x0B << 0) +#define SBC_IDE_PIO1_TA (0x0B << 0) /* Timing parameters PIO mode 2 */ #define SBC_IDE_PIO2_TCSOE (0x05 << 29) #define SBC_IDE_PIO2_TOECS (0x01 << 26) @@ -116,7 +116,7 @@ typedef struct { #define SBC_IDE_PIO2_TWP (0x1F << 14) #define SBC_IDE_PIO2_TCSW (0x05 << 10) #define SBC_IDE_PIO2_TPM (0x00 << 6) -#define SBC_IDE_PIO2_TA (0x22 << 0) +#define SBC_IDE_PIO2_TA (0x22 << 0) /* Timing parameters PIO mode 3 */ #define SBC_IDE_PIO3_TCSOE (0x05 << 29) #define SBC_IDE_PIO3_TOECS (0x01 << 26) @@ -126,7 +126,7 @@ typedef struct { #define SBC_IDE_PIO3_TWP (0x15 << 14) #define SBC_IDE_PIO3_TCSW (0x05 << 10) #define SBC_IDE_PIO3_TPM (0x00 << 6) -#define SBC_IDE_PIO3_TA (0x1A << 0) +#define SBC_IDE_PIO3_TA (0x1A << 0) /* Timing parameters PIO mode 4 */ #define SBC_IDE_PIO4_TCSOE (0x04 << 29) #define SBC_IDE_PIO4_TOECS (0x01 << 26) @@ -136,7 +136,7 @@ typedef struct { #define SBC_IDE_PIO4_TWP (0x0D << 14) #define SBC_IDE_PIO4_TCSW (0x03 << 10) #define SBC_IDE_PIO4_TPM (0x00 << 6) -#define SBC_IDE_PIO4_TA (0x12 << 0) +#define SBC_IDE_PIO4_TA (0x12 << 0) /* Timing parameters MDMA mode 0 */ #define SBC_IDE_MDMA0_TCSOE (0x03 << 29) #define SBC_IDE_MDMA0_TOECS (0x01 << 26) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h index 4e3f3bc26c60..8a9cd754be2d 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h @@ -53,7 +53,7 @@ #define PSC_CTRL_DISABLE 0 #define PSC_CTRL_SUSPEND 2 -#define PSC_CTRL_ENABLE 3 +#define PSC_CTRL_ENABLE 3 /* AC97 Registers. */ #define PSC_AC97CFG_OFFSET 0x00000008 @@ -85,8 +85,8 @@ #define PSC_AC97CFG_SE_ENABLE (1 << 25) #define PSC_AC97CFG_LEN_MASK (0xf << 21) -#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) -#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) +#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) +#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) #define PSC_AC97CFG_GE_ENABLE (1) /* Enable slots 3-12. */ @@ -95,7 +95,7 @@ /* * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. - * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the + * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the * arithmetic in the macro. */ #define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 73853b5a2a31..796afd051c35 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -12,14 +12,14 @@ #include <asm/mach-au1x00/au1000.h> /* The default GPIO numberspace as documented in the Alchemy manuals. - * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. + * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. */ #define ALCHEMY_GPIO1_BASE 0 #define ALCHEMY_GPIO2_BASE 200 #define ALCHEMY_GPIO1_NUM 32 #define ALCHEMY_GPIO2_NUM 16 -#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) +#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) #define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1) #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) @@ -67,7 +67,7 @@ static inline int au1500_gpio1_to_irq(int gpio) switch (gpio) { case 0 ... 15: case 20: - case 23 ... 28: return MAKE_IRQ(1, gpio); + case 23 ... 28: return MAKE_IRQ(1, gpio); } return -ENXIO; @@ -139,8 +139,8 @@ static inline int au1550_gpio1_to_irq(int gpio) switch (gpio) { case 0 ... 15: - case 20 ... 28: return MAKE_IRQ(1, gpio); - case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); + case 20 ... 28: return MAKE_IRQ(1, gpio); + case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); } return -ENXIO; @@ -152,9 +152,9 @@ static inline int au1550_gpio2_to_irq(int gpio) switch (gpio) { case 0: return MAKE_IRQ(1, 16); - case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ + case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); - case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ + case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ } return -ENXIO; @@ -190,7 +190,7 @@ static inline int au1200_gpio2_to_irq(int gpio) case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0); case 3: return MAKE_IRQ(0, 22); case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4); - case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ + case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ } return -ENXIO; @@ -428,7 +428,7 @@ static inline void alchemy_gpio2_disable_int(int gpio2) /** * alchemy_gpio2_enable - Activate GPIO2 block. * - * The GPIO2 block must be enabled excplicitly to work. On systems + * The GPIO2 block must be enabled excplicitly to work. On systems * where this isn't done by the bootloader, this macro can be used. */ static inline void alchemy_gpio2_enable(void) @@ -533,7 +533,7 @@ static inline int alchemy_irq_to_gpio(int irq) * 2 (1 for Au1000) gpio_chips are registered. * *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: - * the boards' gpio.h must provide the linux gpio wrapper functions, + * the boards' gpio.h must provide the linux gpio wrapper functions, * *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: * inlinable gpio functions are provided which enable access to the diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index fb9975c74c57..ce02894271c6 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -130,7 +130,7 @@ static inline int au1300_gpio_getinitlvl(unsigned int gpio) * A gpiochip for the 75 GPIOs is registered. * *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: -* the boards' gpio.h must provide the linux gpio wrapper functions, +* the boards' gpio.h must provide the linux gpio wrapper functions, * *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: * inlinable gpio functions are provided which enable access to the |
