summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/cpu/cyrix.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/cpu/cyrix.c')
-rw-r--r--arch/i386/kernel/cpu/cyrix.c42
1 files changed, 20 insertions, 22 deletions
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index f03b7f94c304..c0c3b59de32c 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -12,7 +12,7 @@
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
unsigned long flags;
@@ -52,25 +52,25 @@ static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
* Actually since bugs.h doesn't even reference this perhaps someone should
* fix the documentation ???
*/
-static unsigned char Cx86_dir0_msb __initdata = 0;
+static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
-static char Cx86_model[][9] __initdata = {
+static char Cx86_model[][9] __cpuinitdata = {
"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
"M II ", "Unknown"
};
-static char Cx486_name[][5] __initdata = {
+static char Cx486_name[][5] __cpuinitdata = {
"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
"SRx2", "DRx2"
};
-static char Cx486S_name[][4] __initdata = {
+static char Cx486S_name[][4] __cpuinitdata = {
"S", "S2", "Se", "S2e"
};
-static char Cx486D_name[][4] __initdata = {
+static char Cx486D_name[][4] __cpuinitdata = {
"DX", "DX2", "?", "?", "?", "DX4"
};
-static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __initdata = "12??43";
-static char cyrix_model_mult2[] __initdata = "12233445";
+static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __cpuinitdata = "12??43";
+static char cyrix_model_mult2[] __cpuinitdata = "12233445";
/*
* Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
@@ -82,7 +82,7 @@ static char cyrix_model_mult2[] __initdata = "12233445";
extern void calibrate_delay(void) __init;
-static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
{
unsigned long flags;
@@ -107,7 +107,7 @@ static void __init check_cx686_slop(struct cpuinfo_x86 *c)
}
-static void __init set_cx86_reorder(void)
+static void __cpuinit set_cx86_reorder(void)
{
u8 ccr3;
@@ -122,7 +122,7 @@ static void __init set_cx86_reorder(void)
setCx86(CX86_CCR3, ccr3);
}
-static void __init set_cx86_memwb(void)
+static void __cpuinit set_cx86_memwb(void)
{
u32 cr0;
@@ -137,7 +137,7 @@ static void __init set_cx86_memwb(void)
setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
}
-static void __init set_cx86_inc(void)
+static void __cpuinit set_cx86_inc(void)
{
unsigned char ccr3;
@@ -158,7 +158,7 @@ static void __init set_cx86_inc(void)
* Configure later MediaGX and/or Geode processor.
*/
-static void __init geode_configure(void)
+static void __cpuinit geode_configure(void)
{
unsigned long flags;
u8 ccr3, ccr4;
@@ -184,14 +184,14 @@ static void __init geode_configure(void)
#ifdef CONFIG_PCI
-static struct pci_device_id __initdata cyrix_55x0[] = {
+static struct pci_device_id __cpuinitdata cyrix_55x0[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
{ },
};
#endif
-static void __init init_cyrix(struct cpuinfo_x86 *c)
+static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
@@ -346,7 +346,7 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
/*
* Handle National Semiconductor branded processors
*/
-static void __init init_nsc(struct cpuinfo_x86 *c)
+static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
{
/* There may be GX1 processors in the wild that are branded
* NSC and not Cyrix.
@@ -394,7 +394,7 @@ static inline int test_cyrix_52div(void)
return (unsigned char) (test >> 8) == 0x02;
}
-static void cyrix_identify(struct cpuinfo_x86 * c)
+static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c)
{
/* Detect Cyrix with disabled CPUID */
if ( c->x86 == 4 && test_cyrix_52div() ) {
@@ -427,10 +427,9 @@ static void cyrix_identify(struct cpuinfo_x86 * c)
local_irq_restore(flags);
}
}
- generic_identify(c);
}
-static struct cpu_dev cyrix_cpu_dev __initdata = {
+static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
.c_init = init_cyrix,
@@ -453,11 +452,10 @@ static int __init cyrix_exit_cpu(void)
late_initcall(cyrix_exit_cpu);
-static struct cpu_dev nsc_cpu_dev __initdata = {
+static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
.c_init = init_nsc,
- .c_identify = generic_identify,
};
int __init nsc_init_cpu(void)
OpenPOWER on IntegriCloud