diff options
Diffstat (limited to 'arch/frv/kernel/debug-stub.c')
| -rw-r--r-- | arch/frv/kernel/debug-stub.c | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/arch/frv/kernel/debug-stub.c b/arch/frv/kernel/debug-stub.c deleted file mode 100644 index a0228f717ef2..000000000000 --- a/arch/frv/kernel/debug-stub.c +++ /dev/null @@ -1,258 +0,0 @@ -/* debug-stub.c: debug-mode stub - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/serial_reg.h> -#include <linux/start_kernel.h> - -#include <asm/serial-regs.h> -#include <asm/timer-regs.h> -#include <asm/irc-regs.h> -#include <asm/gdb-stub.h> -#include "gdb-io.h" - -/* CPU board CON5 */ -#define __UART0(X) (*(volatile uint8_t *)(UART0_BASE + (UART_##X))) - -#define LSR_WAIT_FOR0(STATE) \ -do { \ -} while (!(__UART0(LSR) & UART_LSR_##STATE)) - -#define FLOWCTL_QUERY0(LINE) ({ __UART0(MSR) & UART_MSR_##LINE; }) -#define FLOWCTL_CLEAR0(LINE) do { __UART0(MCR) &= ~UART_MCR_##LINE; } while (0) -#define FLOWCTL_SET0(LINE) do { __UART0(MCR) |= UART_MCR_##LINE; } while (0) - -#define FLOWCTL_WAIT_FOR0(LINE) \ -do { \ - gdbstub_do_rx(); \ -} while(!FLOWCTL_QUERY(LINE)) - -struct frv_debug_status __debug_status; - -static void __init debug_stub_init(void); - -/*****************************************************************************/ -/* - * debug mode handler stub - * - we come here with the CPU in debug mode and with exceptions disabled - * - handle debugging services for userspace - */ -asmlinkage void debug_stub(void) -{ - unsigned long hsr0; - int type = 0; - - static u8 inited = 0; - if (!inited) { - debug_stub_init(); - type = -1; - inited = 1; - } - - hsr0 = __get_HSR(0); - if (hsr0 & HSR0_ETMD) - __set_HSR(0, hsr0 & ~HSR0_ETMD); - - /* disable single stepping */ - __debug_status.dcr &= ~DCR_SE; - - /* kernel mode can propose an exception be handled in debug mode by jumping to a special - * location */ - if (__debug_frame->pc == (unsigned long) __break_hijack_kernel_event_breaks_here) { - /* replace the debug frame with the kernel frame and discard - * the top kernel context */ - *__debug_frame = *__frame; - __frame = __debug_frame->next_frame; - __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12; - __debug_status.brr |= BRR_EB; - } - - if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) { - __debug_frame->pc = __debug_frame->lr; - type = __debug_frame->gr8; - } - -#ifdef CONFIG_GDBSTUB - gdbstub(type); -#endif - - if (hsr0 & HSR0_ETMD) - __set_HSR(0, __get_HSR(0) | HSR0_ETMD); - -} /* end debug_stub() */ - -/*****************************************************************************/ -/* - * debug stub initialisation - */ -static void __init debug_stub_init(void) -{ - __set_IRR(6, 0xff000000); /* map ERRs to NMI */ - __set_IITMR(1, 0x20000000); /* ERR0/1, UART0/1 IRQ detect levels */ - - asm volatile(" movgs gr0,ibar0 \n" - " movgs gr0,ibar1 \n" - " movgs gr0,ibar2 \n" - " movgs gr0,ibar3 \n" - " movgs gr0,dbar0 \n" - " movgs gr0,dbmr00 \n" - " movgs gr0,dbmr01 \n" - " movgs gr0,dbdr00 \n" - " movgs gr0,dbdr01 \n" - " movgs gr0,dbar1 \n" - " movgs gr0,dbmr10 \n" - " movgs gr0,dbmr11 \n" - " movgs gr0,dbdr10 \n" - " movgs gr0,dbdr11 \n" - ); - - /* deal with debugging stub initialisation and initial pause */ - if (__debug_frame->pc == (unsigned long) __debug_stub_init_break) - __debug_frame->pc = (unsigned long) start_kernel; - - /* enable the debug events we want to trap */ - __debug_status.dcr = DCR_EBE; - -#ifdef CONFIG_GDBSTUB - gdbstub_init(); -#endif - - __clr_MASK_all(); - __clr_MASK(15); - __clr_RC(15); - -} /* end debug_stub_init() */ - -/*****************************************************************************/ -/* - * kernel "exit" trap for gdb stub - */ -void debug_stub_exit(int status) -{ - -#ifdef CONFIG_GDBSTUB - gdbstub_exit(status); -#endif - -} /* end debug_stub_exit() */ - -/*****************************************************************************/ -/* - * send string to serial port - */ -void debug_to_serial(const char *p, int n) -{ - char ch; - - for (; n > 0; n--) { - ch = *p++; - FLOWCTL_SET0(DTR); - LSR_WAIT_FOR0(THRE); - // FLOWCTL_WAIT_FOR(CTS); - - if (ch == 0x0a) { - __UART0(TX) = 0x0d; - mb(); - LSR_WAIT_FOR0(THRE); - // FLOWCTL_WAIT_FOR(CTS); - } - __UART0(TX) = ch; - mb(); - - FLOWCTL_CLEAR0(DTR); - } - -} /* end debug_to_serial() */ - -/*****************************************************************************/ -/* - * send string to serial port - */ -void debug_to_serial2(const char *fmt, ...) -{ - va_list va; - char buf[64]; - int n; - - va_start(va, fmt); - n = vsprintf(buf, fmt, va); - va_end(va); - - debug_to_serial(buf, n); - -} /* end debug_to_serial2() */ - -/*****************************************************************************/ -/* - * set up the ttyS0 serial port baud rate timers - */ -void __init console_set_baud(unsigned baud) -{ - unsigned value, high, low; - u8 lcr; - - /* work out the divisor to give us the nearest higher baud rate */ - value = __serial_clock_speed_HZ / 16 / baud; - - /* determine the baud rate range */ - high = __serial_clock_speed_HZ / 16 / value; - low = __serial_clock_speed_HZ / 16 / (value + 1); - - /* pick the nearest bound */ - if (low + (high - low) / 2 > baud) - value++; - - lcr = __UART0(LCR); - __UART0(LCR) |= UART_LCR_DLAB; - mb(); - __UART0(DLL) = value & 0xff; - __UART0(DLM) = (value >> 8) & 0xff; - mb(); - __UART0(LCR) = lcr; - mb(); - -} /* end console_set_baud() */ - -/*****************************************************************************/ -/* - * - */ -int __init console_get_baud(void) -{ - unsigned value; - u8 lcr; - - lcr = __UART0(LCR); - __UART0(LCR) |= UART_LCR_DLAB; - mb(); - value = __UART0(DLM) << 8; - value |= __UART0(DLL); - __UART0(LCR) = lcr; - mb(); - - return value; -} /* end console_get_baud() */ - -/*****************************************************************************/ -/* - * display BUG() info - */ -#ifndef CONFIG_NO_KERNEL_MSG -void __debug_bug_printk(const char *file, unsigned line) -{ - printk("kernel BUG at %s:%d!\n", file, line); - -} /* end __debug_bug_printk() */ -#endif |
