diff options
Diffstat (limited to 'arch/arm')
114 files changed, 1055 insertions, 769 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c71a8f3535a..975b5ddc60e9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -195,8 +195,7 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Patch physical to virtual translations at runtime" depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -398,6 +397,7 @@ config ARCH_MXC select CLKSRC_MMIO select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK + select MULTI_IRQ_HANDLER help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b0..9260c293405c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -154,9 +154,7 @@ machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 -machine-$(CONFIG_ARCH_MX1) := imx -machine-$(CONFIG_ARCH_MX2) := imx -machine-$(CONFIG_ARCH_MX25) := imx +machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_MX3) := imx machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 9ad4c656c9bd..11a4192197c8 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -3,9 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -CONFIG_KALLSYMS_EXTRA_PASS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y CONFIG_PROFILING=y @@ -17,8 +15,12 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX2=y -CONFIG_MACH_MX27=y +CONFIG_ARCH_IMX_V4_V5=y +CONFIG_ARCH_MX1ADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MACH_MX21ADS=y +CONFIG_MACH_MX25_3DS=y +CONFIG_MACH_EUKREA_CPUIMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_CPUIMX27=y @@ -29,6 +31,7 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27LITE=y CONFIG_MACH_PCA100=y CONFIG_MACH_MXT_TD60=y +CONFIG_MACH_IMX27IPCAM=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -39,7 +42,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y @@ -55,8 +57,9 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -69,12 +72,15 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y -CONFIG_FEC=y +CONFIG_SMC91X=y +CONFIG_DM9000=y +CONFIG_SMC911X=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV is not set @@ -84,10 +90,10 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -98,19 +104,56 @@ CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_MFD_MC13XXX=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_MC13783=y +CONFIG_REGULATOR_MC13892=y CONFIG_FB=y CONFIG_FB_IMX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=m +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_MX27VIS_AIC32X4=y +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_USB_HID=m +CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_MC13783=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y +CONFIG_IMX_DMA=y +# CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y @@ -119,12 +162,9 @@ CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig deleted file mode 100644 index c9436d0bf593..000000000000 --- a/arch/arm/configs/mx1_defconfig +++ /dev/null @@ -1,91 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX1=y -CONFIG_ARCH_MX1ADS=y -CONFIG_MACH_SCB9328=y -CONFIG_MACH_APF9328=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_IMX=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_MXC=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig deleted file mode 100644 index 411f88dd4402..000000000000 --- a/arch/arm/configs/mx21_defconfig +++ /dev/null @@ -1,97 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX2=y -CONFIG_MACH_MX21ADS=y -CONFIG_MXC_PWM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_SERIO is not set -# CONFIG_CONSOLE_TRANSLATIONS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_IMX=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_MXC=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx5_defconfig index 88c5802a2351..d0d8dfece37e 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx5_defconfig @@ -1,5 +1,6 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_RELAY=y @@ -13,21 +14,29 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX51=y +CONFIG_ARCH_MX5=y CONFIG_MACH_MX51_BABBAGE=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y +CONFIG_MACH_EUKREA_CPUIMX51SD=y +CONFIG_MACH_MX51_EFIKAMX=y +CONFIG_MACH_MX51_EFIKASB=y +CONFIG_MACH_MX53_EVK=y +CONFIG_MACH_MX53_SMD=y +CONFIG_MACH_MX53_LOCO=y +CONFIG_MACH_MX53_ARD=y +CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp" +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m -CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_TEST_SUSPEND=y CONFIG_NET=y @@ -42,13 +51,13 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_CONNECTOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -56,8 +65,10 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # CONFIG_SCSI_LOWLEVEL is not set -CONFIG_ATA=m +CONFIG_ATA=y +CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y +CONFIG_MII=m CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_QSEMI_PHY=y @@ -71,49 +82,57 @@ CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_GPIO=y +CONFIG_MICREL_PHY=y CONFIG_NET_ETHERNET=y -CONFIG_MII=m -CONFIG_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set -CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_EVBUG=m +CONFIG_KEYBOARD_GPIO=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=m +CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m +CONFIG_I2C_IMX=y +CONFIG_SPI=y +CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_HID_SUPPORT is not set +CONFIG_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_MFD_MC13XXX=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_MC13892=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_BLOCK=m -CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_MXC=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -127,7 +146,6 @@ CONFIG_EXT4_FS_SECURITY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y CONFIG_ISO9660_FS=m @@ -151,17 +169,13 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y CONFIG_SECURITYFS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=m diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 7fa3bb0d2397..a08783823b32 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable) @ enable access to CP0 and CP1 XSC(mrc p15, 0, r4, c15, c1, 0) - XSC(orr r4, r4, #0xf) + XSC(orr r4, r4, #0x3) XSC(mcr p15, 0, r4, c15, c1, 0) PJ4(mrc p15, 0, r4, c1, c0, 2) - PJ4(orr r4, r4, #0x3) + PJ4(orr r4, r4, #0xf) PJ4(mcr p15, 0, r4, c1, c0, 2) mov r0, #0 @ nothing to load @@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: @ flip Conan access +1: @ flip Concan access XSC(eor r1, r1, #0x3) XSC(mcr p15, 0, r1, c15, c1, 0) PJ4(eor r1, r1, #0xf) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 05b377616fd5..cc2020c2c709 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #endif s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); if (s && !is_smp()) +#ifdef CONFIG_SMP_ON_UP fixup_smp((void *)s->sh_addr, s->sh_size); +#else + return -EINVAL; +#endif return 0; } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0519dd7f034b..b4e1bf8757c7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -5,6 +5,18 @@ config IMX_HAVE_DMA_V1 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. # To easily distinguish good and reviewed from unreviewed usages new (and IMHO # more sensible) names are used: SOC_IMX31 and SOC_IMX35 +config ARCH_MX1 + bool + +config MACH_MX21 + bool + +config ARCH_MX25 + bool + +config MACH_MX27 + bool + config ARCH_MX31 bool @@ -13,6 +25,7 @@ config ARCH_MX35 config SOC_IMX1 bool + select ARCH_MX1 select CPU_ARM920T select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 @@ -20,6 +33,7 @@ config SOC_IMX1 config SOC_IMX21 bool + select MACH_MX21 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 @@ -28,6 +42,7 @@ config SOC_IMX21 config SOC_IMX25 bool + select ARCH_MX25 select CPU_ARM926T select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_IOMUX_V3 @@ -35,6 +50,7 @@ config SOC_IMX25 config SOC_IMX27 bool + select MACH_MX27 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 @@ -59,7 +75,7 @@ config SOC_IMX35 select MXC_AVIC -if ARCH_MX1 +if ARCH_IMX_V4_V5 comment "MX1 platforms:" config MACH_MXLADS @@ -87,30 +103,6 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board -endif - -if ARCH_MX2 - -choice - prompt "CPUs:" - default MACH_MX21 - -config MACH_MX21 - bool "i.MX21 support" - help - This enables support for Freescale's MX2 based i.MX21 processor. - -config MACH_MX27 - bool "i.MX27 support" - help - This enables support for Freescale's MX2 based i.MX27 processor. - -endchoice - -endif - -if MACH_MX21 - comment "MX21 platforms:" config MACH_MX21ADS @@ -124,15 +116,12 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -endif - -if ARCH_MX25 - comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" select SOC_IMX25 + select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC @@ -174,10 +163,6 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD endchoice -endif - -if MACH_MX27 - comment "MX27 platforms:" config MACH_MX27ADS @@ -485,6 +470,7 @@ config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX2_WDT help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e9eb36dad888..0a5332c694bd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o -obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o +obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c index 69d1322add3c..e5538a4d7f23 100644 --- a/arch/arm/mach-imx/cache-l2x0.c +++ b/arch/arm/mach-imx/cache-l2x0.c @@ -53,4 +53,4 @@ static int mxc_init_l2x0(void) return 0; } -arch_initcall(mxc_init_l2x0); +early_initcall(mxc_init_l2x0); diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index 0fc7ba56d616..b0fec74c8c91 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -263,6 +263,7 @@ DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -310,6 +311,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) /* i.mx25 has the i.mx35 type sdma */ _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) + _REGISTER_CLOCK(NULL, "iim", iim_clk) }; int __init mx25_clocks_init(void) @@ -331,6 +333,13 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + + clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX25", mx25_revision()); + clk_disable(&iim_clk); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index becc92e0b95d..88fe00a146e3 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -751,6 +751,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&gpio_clk); clk_enable(&emi_clk); clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX27", mx27_revision()); + clk_disable(&iim_clk); #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart1_clk); diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 58ea0a857ef4..988a28178d4c 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -611,11 +611,11 @@ int __init mx31_clocks_init(unsigned long fref) clk_enable(&gpt_clk); clk_enable(&emi_clk); clk_enable(&iim_clk); + mx31_revision(); + clk_disable(&iim_clk); clk_enable(&serial_pll_clk); - mx31_read_cpu_rev(); - if (mx31_revision() >= IMX_CHIP_REVISION_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index c39f5c3e20b4..8116f119517d 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -537,7 +537,8 @@ int __init mx35_clocks_init() __raw_writel(cgr3, CCM_BASE + CCM_CGR3); clk_enable(&iim_clk); - mx35_read_cpu_rev(); + imx_print_silicon_rev("i.MX35", mx35_revision()); + clk_disable(&iim_clk); #ifdef CONFIG_MXC_USE_EPIT epit_timer_init(&epit1_clk, diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c new file mode 100644 index 000000000000..6914bcbf84e4 --- /dev/null +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -0,0 +1,41 @@ +/* + * MX25 CPU type detection + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/iim.h> + +static int mx25_cpu_rev = -1; + +static int mx25_read_cpu_rev(void) +{ + u32 rev; + + rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV)); + switch (rev) { + case 0x00: + return IMX_CHIP_REVISION_1_0; + case 0x01: + return IMX_CHIP_REVISION_1_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + +int mx25_revision(void) +{ + if (mx25_cpu_rev == -1) + mx25_cpu_rev = mx25_read_cpu_rev(); + + return mx25_cpu_rev; +} +EXPORT_SYMBOL(mx25_revision); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index 3b117be37bd2..ff38e1505f67 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -26,12 +26,12 @@ #include <mach/hardware.h> -static int cpu_silicon_rev = -1; -static int cpu_partnumber; +static int mx27_cpu_rev = -1; +static int mx27_cpu_partnumber; #define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ -static void query_silicon_parameter(void) +static int mx27_read_cpu_rev(void) { u32 val; /* @@ -42,20 +42,18 @@ static void query_silicon_parameter(void) val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); + mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); + switch (val >> 28) { case 0: - cpu_silicon_rev = IMX_CHIP_REVISION_1_0; - break; + return IMX_CHIP_REVISION_1_0; case 1: - cpu_silicon_rev = IMX_CHIP_REVISION_2_0; - break; + return IMX_CHIP_REVISION_2_0; case 2: - cpu_silicon_rev = IMX_CHIP_REVISION_2_1; - break; + return IMX_CHIP_REVISION_2_1; default: - cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN; + return IMX_CHIP_REVISION_UNKNOWN; } - cpu_partnumber = (int)((val >> 12) & 0xFFFF); } /* @@ -65,12 +63,12 @@ static void query_silicon_parameter(void) */ int mx27_revision(void) { - if (cpu_silicon_rev == -1) - query_silicon_parameter(); + if (mx27_cpu_rev == -1) + mx27_cpu_rev = mx27_read_cpu_rev(); - if (cpu_partnumber != 0x8821) + if (mx27_cpu_partnumber != 0x8821) return -EINVAL; - return cpu_silicon_rev; + return mx27_cpu_rev; } EXPORT_SYMBOL(mx27_revision); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index a3780700a882..3f2345f0cdaf 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -13,45 +13,50 @@ #include <linux/io.h> #include <mach/hardware.h> #include <mach/iim.h> +#include <mach/common.h> -unsigned int mx31_cpu_rev; -EXPORT_SYMBOL(mx31_cpu_rev); +static int mx31_cpu_rev = -1; static struct { u8 srev; const char *name; - const char *v; unsigned int rev; -} mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, +} mx31_cpu_type[] = { + { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, + { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 }, }; -void __init mx31_read_cpu_rev(void) +static int mx31_read_cpu_rev(void) { u32 i, srev; /* read SREV register from IIM module */ srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { - printk(KERN_INFO - "CPU identified as %s, silicon rev %s\n", - mx31_cpu_type[i].name, mx31_cpu_type[i].v); - - mx31_cpu_rev = mx31_cpu_type[i].rev; - return; + imx_print_silicon_rev(mx31_cpu_type[i].name, + mx31_cpu_type[i].rev); + return mx31_cpu_type[i].rev; } - mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; + imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN); + return IMX_CHIP_REVISION_UNKNOWN; +} + +int mx31_revision(void) +{ + if (mx31_cpu_rev == -1) + mx31_cpu_rev = mx31_read_cpu_rev(); - printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); + return mx31_cpu_rev; } +EXPORT_SYMBOL(mx31_revision); diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 6637cd819ecb..846e46eb8cbf 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -13,32 +13,30 @@ #include <mach/hardware.h> #include <mach/iim.h> -unsigned int mx35_cpu_rev; -EXPORT_SYMBOL(mx35_cpu_rev); +static int mx35_cpu_rev = -1; -void __init mx35_read_cpu_rev(void) +static int mx35_read_cpu_rev(void) { u32 rev; - char *srev; rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: - mx35_cpu_rev = IMX_CHIP_REVISION_1_0; - srev = "1.0"; - break; + return IMX_CHIP_REVISION_1_0; case 0x10: - mx35_cpu_rev = IMX_CHIP_REVISION_2_0; - srev = "2.0"; - break; + return IMX_CHIP_REVISION_2_0; case 0x11: - mx35_cpu_rev = IMX_CHIP_REVISION_2_1; - srev = "2.1"; - break; + return IMX_CHIP_REVISION_2_1; default: - mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; - srev = "unknown"; + return IMX_CHIP_REVISION_UNKNOWN; } +} + +int mx35_revision(void) +{ + if (mx35_cpu_rev == -1) + mx35_cpu_rev = mx35_read_cpu_rev(); - printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); + return mx35_cpu_rev; } +EXPORT_SYMBOL(mx35_revision); diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index a404c89485ca..1e486e67dabb 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -136,6 +136,7 @@ MACHINE_START(APF9328, "Armadeus APF9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &apf9328_timer, .init_machine = apf9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ede2710f8b76..f5b4469310dc 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -562,6 +562,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &armadillo5x0_timer, .init_machine = armadillo5x0_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index f49470553bdf..313f62ddc1ef 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -62,6 +62,7 @@ MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &bug_timer, .init_machine = bug_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 87887ac5806b..b0cd62d6a3cd 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -315,6 +315,7 @@ MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &eukrea_cpuimx27_timer, .init_machine = eukrea_cpuimx27_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index f39a478ba1a6..68e8c7aed569 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -198,6 +198,7 @@ MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &eukrea_cpuimx35_timer, .init_machine = eukrea_cpuimx35_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index da36da52969d..e2343c8594fc 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -167,6 +167,7 @@ MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, .timer = &eukrea_cpuimx25_timer, .init_machine = eukrea_cpuimx25_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6707de0ab716..678cf831bc31 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; @@ -266,6 +279,7 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &visstrim_m10_timer, .init_machine = visstrim_m10_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 272f793e9247..f572ce943947 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -75,6 +75,7 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27ipcam_timer, .init_machine = mx27ipcam_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index d81a769fe895..e7fc4f044946 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -81,6 +81,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27lite_timer, .init_machine = mx27lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index e472a1d88058..a65d91048348 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -275,6 +275,7 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &kzm_timer, .init_machine = kzm_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 5cd8bee46960..842859c22de7 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -149,6 +149,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END @@ -158,6 +159,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d389ecf9b5a8..43dd22b768e0 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -309,6 +309,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .map_io = mx21ads_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, + .handle_irq = imx21_handle_irq, .timer = &mx21ads_timer, .init_machine = mx21ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 7f66a91df361..bd735ad6675e 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -43,6 +43,8 @@ #include "devices-imx25.h" +#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -108,6 +110,11 @@ static iomux_v3_cfg_t mx25pdk_pads[] = { /* I2C1 */ MX25_PAD_I2C1_CLK__I2C1_CLK, MX25_PAD_I2C1_DAT__I2C1_DAT, + + /* CAN1 */ + MX25_PAD_GPIO_A__CAN1_TX, + MX25_PAD_GPIO_B__CAN1_RX, + MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */ }; static const struct fec_platform_data mx25_fec_pdata __initconst = { @@ -240,6 +247,9 @@ static void __init mx25pdk_init(void) imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata); imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); + + gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn"); + imx25_add_flexcan0(NULL); } static void __init mx25pdk_timer_init(void) @@ -257,6 +267,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, .timer = &mx25pdk_timer, .init_machine = mx25pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6fa6934ab150..ad7f24fdb9d7 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -425,6 +425,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27pdk_timer, .init_machine = mx27pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index fc26ed71b9ed..e6d132108b2b 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -349,6 +349,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27ads_timer, .init_machine = mx27ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index c20be7530927..b4aa9c35bb45 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -768,6 +768,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31_3ds_timer, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 0ce49478a479..13e7347e14d4 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); @@ -539,6 +539,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31ads_timer, .init_machine = mx31ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 750368ddf0f9..070a8d1f40cc 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); @@ -299,6 +299,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31lilly_timer, .init_machine = mx31lilly_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 4b47fd9fdd89..4f66ea440742 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -284,6 +284,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31lite_timer, .init_machine = mx31lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index b358383120e7..cd07ebe9b9d8 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -28,6 +28,9 @@ #include <linux/spi/spi.h> #include <linux/types.h> #include <linux/memblock.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -490,6 +493,18 @@ err: } +static void mx31moboard_poweroff(void) +{ + struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); + + if (!IS_ERR(clk)) + clk_enable(clk); + + mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); + + __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); +} + static int mx31moboard_baseboard; core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); @@ -528,6 +543,8 @@ static void __init mx31moboard_init(void) moboard_usbh2_init(); + pm_power_off = mx31moboard_poweroff; + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -572,6 +589,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31moboard_timer, .init_machine = mx31moboard_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index b3b9bd8ac2a3..5a5eb3e0f737 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -221,6 +221,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c85876fed663..d01a92f71006 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -271,6 +271,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mxt_td60_timer, .init_machine = mxt_td60_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 71083aa16038..100babc71875 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -439,6 +439,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .timer = &pca100_timer, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index f45b7cd72c8a..3fb5eaa8248a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -693,6 +693,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &pcm037_timer, .init_machine = pcm037_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2d6a64bbac44..dac2b790df06 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -353,6 +353,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &pcm038_timer, .init_machine = pcm038_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 660ec3e80cf8..a27baa493ced 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -422,6 +422,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &pcm043_timer, .init_machine = pcm043_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 3626f486498a..4243d1f548c2 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -249,6 +249,7 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); + imx31_add_imx2_wdt(NULL); } static void __init qong_timer_init(void) @@ -266,6 +267,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &qong_timer, .init_machine = qong_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index db2d60470e15..17f15fb57e1c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -141,6 +141,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 7d8e012a6335..4f310b38924d 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -319,6 +319,7 @@ MACHINE_START(VPR200, "VPR200") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &vpr200_timer, .init_machine = vpr200_board_init, MACHINE_END diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index c070c24255f4..98e25d9aaab6 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -16,16 +16,18 @@ #include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> -#include <mach/mfp-gplugd.h> #include "common.h" static unsigned long gplugd_pin_config[] __initdata = { /* UART3 */ - GPIO8_UART3_SOUT, - GPIO9_UART3_SIN, - GPI1O_UART3_CTS, - GPI11_UART3_RTS, + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, /* MMC2 */ GPIO28_MMC2_CMD, @@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO105_CI2C_SDA, GPIO106_CI2C_SCL, + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + /* Select JTAG */ GPIO109_GPIO, @@ -154,7 +162,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(35, 1); - gpio_free(104); + gpio_free(35); } if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { @@ -162,7 +170,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(85, 0); - gpio_free(104); + gpio_free(85); } } diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h deleted file mode 100644 index b8cf38d85600..000000000000 --- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h - * - * MFP definitions used in gplugD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MFP_GPLUGD_H -#define __MACH_MFP_GPLUGD_H - -#include <plat/mfp.h> -#include <mach/mfp.h> - -/* UART3 */ -#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) -#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) -#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) -#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) - -/* MMC2 */ -#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) -#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) -#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) -#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) -#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) -#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) - -/* I2S */ -#undef GPIO114_I2S_FRM -#undef GPIO115_I2S_BCLK - -#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) -#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) -#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) - -/* MMC4 */ -#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) -#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) -#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) -#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) -#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) -#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) - -/* OTG GPIO */ -#define GPIO_USB_OTG_PEN 18 -#define GPIO_USB_OIDIR 20 - -/* Other GPIOs are 35, 84, 85 */ -#endif /* __MACH_MFP_GPLUGD_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 8c782328b21c..92aaa3c19d61 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -203,6 +203,10 @@ #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) /* UART */ +#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2) +#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2) #define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) #define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) @@ -232,6 +236,22 @@ #define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) #define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + /* LCD */ #define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) #define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) @@ -269,11 +289,12 @@ #define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) /* I2S */ -#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) -#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) -#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) -#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) -#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2) +#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2) /* PWM */ #define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) @@ -324,4 +345,10 @@ #define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) #define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) +/* SSP2 */ +#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4) +#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4) +#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4) +#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 99833b9485cf..4e91ee6e27c8 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -51,12 +51,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } unsigned long long notrace sched_clock(void) @@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; - /* disable and clear pending interrupt status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + /* + * Clear pending interrupt status. + */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + c->event_handler(c); + return IRQ_HANDLED; } static int timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next; + unsigned long flags; local_irq_save(flags); - /* clear pending interrupt status and enable */ + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + + /* + * Clear and enable timer match 0 interrupt. + */ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); - next = timer_read() + delta; - __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + /* + * Setup new clockevent timer value. + */ + __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + /* + * Enable timer 0. + */ + __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); local_irq_restore(flags); + return 0; } @@ -145,23 +168,26 @@ static struct clocksource cksrc = { static void __init timer_config(void) { uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); - uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); - uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); + ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); - /* free-running mode */ - __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + /* set timer 0 to periodic mode, and timer 1 to free-running mode */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - /* enable timer counter */ - __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + + /* enable timer 1 counter */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); } static struct irqaction timer_irq = { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 28b94e0e04b3..fb4c503bb052 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,8 +1,9 @@ -if ARCH_MX503 || ARCH_MX51 +if ARCH_MX5 + # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. -config ARCH_MX5 +config ARCH_MX51 bool config ARCH_MX50 @@ -19,7 +20,6 @@ config SOC_IMX50 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MX50 config SOC_IMX51 @@ -30,7 +30,7 @@ config SOC_IMX51 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 + select ARCH_MX51 config SOC_IMX53 bool @@ -38,10 +38,8 @@ config SOC_IMX53 select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MX5 select ARCH_MX53 -if ARCH_MX50_SUPPORTED #comment "i.MX50 machines:" config MACH_MX50_RDP @@ -57,9 +55,6 @@ config MACH_MX50_RDP Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX50_SUPPORTED - -if ARCH_MX51 comment "i.MX51 machines:" config MACH_MX51_BABBAGE @@ -168,9 +163,6 @@ config MACH_MX51_EFIKASB Include support for Genesi Efika Smartbook. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX51 - -if ARCH_MX53_SUPPORTED comment "i.MX53 machines:" config MACH_MX53_EVK @@ -222,6 +214,4 @@ config MACH_MX53_ARD Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX53_SUPPORTED - endif diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa70266..a7a6682560b7 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -297,6 +297,7 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mxc_timer, .init_machine = eukrea_cpuimx51_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ff096d587299..06beec10a811 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -335,6 +335,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mxc_timer, .init_machine = eukrea_cpuimx51sd_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 7de25c6712eb..fc3621d90bde 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -219,6 +219,7 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") .map_io = mx50_map_io, .init_early = imx50_init_early, .init_irq = mx50_init_irq, + .handle_irq = imx50_handle_irq, .timer = &mx50_rdp_timer, .init_machine = mx50_rdp_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 07a38154da21..5f4a168e30ba 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -173,6 +173,7 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mx51_3ds_timer, .init_machine = mx51_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e400b09109ce..4bd5e87195b0 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void) ARRAY_SIZE(mx51babbage_pads)); imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); babbage_fec_reset(); @@ -420,6 +420,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mx51_babbage_timer, .init_machine = mx51_babbage_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index f70700dc0ec1..1c2b5e71931a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void) gpio_request(EFIKAMX_PCBID2, "pcbid2"); gpio_direction_input(EFIKAMX_PCBID2); - id = gpio_get_value(EFIKAMX_PCBID0); - id |= gpio_get_value(EFIKAMX_PCBID1) << 1; - id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; + id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; switch (id) { case 7: @@ -163,6 +163,11 @@ static const struct gpio_led_platform_data .num_leds = ARRAY_SIZE(mx51_efikamx_leds), }; +static struct esdhc_platform_data sd_pdata = { + .cd_type = ESDHC_CD_CONTROLLER, + .wp_type = ESDHC_WP_CONTROLLER, +}; + static struct gpio_keys_button mx51_efikamx_powerkey[] = { { .code = KEY_POWER, @@ -239,9 +244,11 @@ static void __init mx51_efikamx_init(void) /* on < 1.2 boards both SD controllers are used */ if (system_rev < 0x12) { - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, NULL); + imx51_add_sdhci_esdhc_imx(1, &sd_pdata); mx51_efikamx_leds[2].default_trigger = "mmc1"; - } + } else + imx51_add_sdhci_esdhc_imx(0, &sd_pdata); gpio_led_register_device(-1, &mx51_efikamx_leds_data); imx_add_gpio_keys(&mx51_efikamx_powerkey_data); @@ -284,6 +291,7 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .timer = &mx51_efikamx_timer, .init_machine = mx51_efikamx_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 2e4d9d32a87c..b491513e272b 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -56,6 +56,7 @@ #define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) +#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL) static iomux_v3_cfg_t mx51efikasb_pads[] = { /* USB HOST2 */ @@ -97,6 +98,8 @@ static iomux_v3_cfg_t mx51efikasb_pads[] = { /* BT */ MX51_PAD_EIM_A17__GPIO2_11, + + MX51_PAD_SD1_CD, }; static int initialize_usbh2_port(struct platform_device *pdev) @@ -156,23 +159,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = { { .code = KEY_POWER, .gpio = EFIKASB_PWRKEY, - .type = EV_PWR, + .type = EV_KEY, .desc = "Power Button", .wakeup = 1, - .debounce_interval = 10, /* ms */ + .active_low = 1, }, { .code = SW_LID, .gpio = EFIKASB_LID, .type = EV_SW, .desc = "Lid Switch", + .active_low = 1, }, { - /* SW_RFKILLALL vs KEY_RFKILL ? */ - .code = SW_RFKILL_ALL, + .code = KEY_RFKILL, .gpio = EFIKASB_RFKILL, - .type = EV_SW, + .type = EV_KEY, .desc = "rfkill", + .active_low = 1, }, }; @@ -181,6 +185,18 @@ static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), }; +static struct esdhc_platform_data sd0_pdata = { +#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27) + .cd_gpio = EFIKASB_SD1_CD, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_CONTROLLER, +}; + +static struct esdhc_platform_data sd1_pdata = { + .cd_type = ESDHC_CD_CONTROLLER, + .wp_type = ESDHC_WP_CONTROLLER, +}; + static struct regulator *pwgt1, *pwgt2; static void mx51_efikasb_power_off(void) @@ -224,8 +240,8 @@ static void __init mx51_efikasb_board_id(void) gpio_request(EFIKASB_PCBID1, "pcb id1"); gpio_direction_input(EFIKASB_PCBID1); - id = gpio_get_value(EFIKASB_PCBID0); - id |= gpio_get_value(EFIKASB_PCBID1) << 1; + id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; switch (id) { default: @@ -249,7 +265,8 @@ static void __init efikasb_board_init(void) mx51_efikasb_board_id(); mx51_efikasb_usb(); - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, &sd0_pdata); + imx51_add_sdhci_esdhc_imx(1, &sd1_pdata); gpio_led_register_device(-1, &mx51_efikasb_leds_data); imx_add_gpio_keys(&mx51_efikasb_keys_data); @@ -269,6 +286,7 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, + .handle_irq = imx51_handle_irq, .init_machine = efikasb_board_init, .timer = &mx51_efikasb_timer, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 76a67c4a2a0b..f58ac83eea28 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -249,6 +249,7 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, .timer = &mx53_ard_timer, .init_machine = mx53_ard_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 1b417b06b736..6a3e6168e322 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -167,6 +167,7 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, .timer = &mx53_evk_timer, .init_machine = mx53_evk_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 4e1d51d252dc..7149416d1519 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/i2c.h> #include <mach/common.h> #include <mach/hardware.h> @@ -42,6 +43,7 @@ #define LOCO_SD3_CD IMX_GPIO_NR(3, 11) #define LOCO_SD3_WP IMX_GPIO_NR(3, 12) #define LOCO_SD1_CD IMX_GPIO_NR(3, 13) +#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14) static iomux_v3_cfg_t mx53_loco_pads[] = { /* FEC */ @@ -64,6 +66,10 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, + /* I2C1 */ + MX53_PAD_CSI0_DAT8__I2C1_SDA, + MX53_PAD_CSI0_DAT9__I2C1_SCL, + MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */ /* I2C2 */ MX53_PAD_KEY_COL3__I2C2_SCL, MX53_PAD_KEY_ROW3__I2C2_SDA, @@ -257,8 +263,15 @@ static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { .num_leds = ARRAY_SIZE(mx53loco_leds), }; +static struct i2c_board_info mx53loco_i2c_devices[] = { + { + I2C_BOARD_INFO("mma8450", 0x1C), + }, +}; + static void __init mx53_loco_board_init(void) { + int ret; imx53_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, @@ -267,6 +280,13 @@ static void __init mx53_loco_board_init(void) mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); imx53_add_imx2_wdt(0, NULL); + + ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); + if (ret) + pr_err("Cannot request ACCEL_EN pin: %d\n", ret); + + i2c_register_board_info(0, mx53loco_i2c_devices, + ARRAY_SIZE(mx53loco_i2c_devices)); imx53_add_imx_i2c(0, &mx53_loco_i2c_data); imx53_add_imx_i2c(1, &mx53_loco_i2c_data); imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); @@ -288,6 +308,7 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, .timer = &mx53_loco_timer, .init_machine = mx53_loco_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index bc02894eafef..e64fd2c088eb 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -140,6 +140,7 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, .timer = &mx53_smd_timer, .init_machine = mx53_smd_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 3fcb5960ac11..afecd78ce203 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk) int i = 0; pllbase = _get_pll_base(clk); - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); /* Wait for lock */ @@ -1550,9 +1554,8 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&main_bus_clk); clk_enable(&iim_clk); - mx51_revision(); + imx_print_silicon_rev("i.MX51", mx51_revision()); clk_disable(&iim_clk); - mx51_display_revision(); /* move usb_phy_clk to 24MHz */ clk_set_parent(&usb_phy1_clk, &osc_clk); @@ -1594,9 +1597,8 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&main_bus_clk); clk_enable(&iim_clk); - mx53_revision(); + imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable(&iim_clk); - mx53_display_revision(); /* Set SDHC parents to be PLL2 */ clk_set_parent(&esdhc1_clk, &pll2_sw_clk); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 86f87da59c64..5c5328257dca 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -18,7 +18,7 @@ #include <mach/hardware.h> #include <asm/io.h> -static int cpu_silicon_rev = -1; +static int mx5_cpu_rev = -1; #define IIM_SREV 0x24 #define MX50_HW_ADADIG_DIGPROG 0xB0 @@ -28,11 +28,14 @@ static int get_mx51_srev(void) void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR); u32 rev = readl(iim_base + IIM_SREV) & 0xff; - if (rev == 0x0) + switch (rev) { + case 0x0: return IMX_CHIP_REVISION_2_0; - else if (rev == 0x10) + case 0x10: return IMX_CHIP_REVISION_3_0; - return 0; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } } /* @@ -45,33 +48,13 @@ int mx51_revision(void) if (!cpu_is_mx51()) return -EINVAL; - if (cpu_silicon_rev == -1) - cpu_silicon_rev = get_mx51_srev(); + if (mx5_cpu_rev == -1) + mx5_cpu_rev = get_mx51_srev(); - return cpu_silicon_rev; + return mx5_cpu_rev; } EXPORT_SYMBOL(mx51_revision); -void mx51_display_revision(void) -{ - int rev; - char *srev; - rev = mx51_revision(); - - switch (rev) { - case IMX_CHIP_REVISION_2_0: - srev = IMX_CHIP_REVISION_2_0_STRING; - break; - case IMX_CHIP_REVISION_3_0: - srev = IMX_CHIP_REVISION_3_0_STRING; - break; - default: - srev = IMX_CHIP_REVISION_UNKNOWN_STRING; - } - printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev); -} -EXPORT_SYMBOL(mx51_display_revision); - #ifdef CONFIG_NEON /* @@ -121,10 +104,10 @@ int mx53_revision(void) if (!cpu_is_mx53()) return -EINVAL; - if (cpu_silicon_rev == -1) - cpu_silicon_rev = get_mx53_srev(); + if (mx5_cpu_rev == -1) + mx5_cpu_rev = get_mx53_srev(); - return cpu_silicon_rev; + return mx5_cpu_rev; } EXPORT_SYMBOL(mx53_revision); @@ -134,7 +117,7 @@ static int get_mx50_srev(void) u32 rev; if (!anatop) { - cpu_silicon_rev = -EINVAL; + mx5_cpu_rev = -EINVAL; return 0; } @@ -159,36 +142,13 @@ int mx50_revision(void) if (!cpu_is_mx50()) return -EINVAL; - if (cpu_silicon_rev == -1) - cpu_silicon_rev = get_mx50_srev(); + if (mx5_cpu_rev == -1) + mx5_cpu_rev = get_mx50_srev(); - return cpu_silicon_rev; + return mx5_cpu_rev; } EXPORT_SYMBOL(mx50_revision); -void mx53_display_revision(void) -{ - int rev; - char *srev; - rev = mx53_revision(); - - switch (rev) { - case IMX_CHIP_REVISION_1_0: - srev = IMX_CHIP_REVISION_1_0_STRING; - break; - case IMX_CHIP_REVISION_2_0: - srev = IMX_CHIP_REVISION_2_0_STRING; - break; - case IMX_CHIP_REVISION_2_1: - srev = IMX_CHIP_REVISION_2_1_STRING; - break; - default: - srev = IMX_CHIP_REVISION_UNKNOWN_STRING; - } - printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev); -} -EXPORT_SYMBOL(mx53_display_revision); - static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 31c152e9def5..9dc3a869033c 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data usbh1_config = { @@ -609,7 +609,6 @@ void __init efika_board_common_init(void) ARRAY_SIZE(mx51efika_pads)); imx51_add_imx_uart(0, &uart_pdata); mx51_efika_usb(); - imx51_add_sdhci_esdhc_imx(0, NULL); /* FIXME: comes from original code. check this. */ if (mx51_revision() < IMX_CHIP_REVISION_2_0) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4cd0231ee539..fdf104f083b7 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -23,6 +23,7 @@ config MACH_STMP378X_DEVB select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_RTC_STMP3XXX help Include support for STMP378x-devb platform. This includes specific configurations for the board and its peripherals. @@ -34,6 +35,7 @@ config MACH_MX23EVK select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB + select MXS_HAVE_PLATFORM_RTC_STMP3XXX help Include support for MX23EVK platform. This includes specific configurations for the board and its peripherals. @@ -48,6 +50,9 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_FLEXCAN select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB + select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_RTC_STMP3XXX select MXS_OCOTP help Include support for MX28EVK platform. This includes specific @@ -63,6 +68,7 @@ config MODULE_TX28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM + select MXS_HAVE_PLATFORM_RTC_STMP3XXX config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 5dcc59d5b9ec..7954013bd32f 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -640,6 +640,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "lradc", lradc_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk) + _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk) + _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk) }; static int clk_misc_init(void) @@ -708,11 +710,11 @@ static int clk_misc_init(void) /* SAIF has to use frac div for functional operation */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); - reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN; + reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); - reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN; + reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); /* @@ -774,6 +776,8 @@ int __init mx28_clocks_init(void) clk_enable(&uart_clk); clk_set_parent(&lcdif_clk, &ref_pix_clk); + clk_set_parent(&saif0_clk, &pll0_clk); + clk_set_parent(&saif1_clk, &pll0_clk); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index c6f345febd39..3fa651d2c994 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -29,3 +29,5 @@ extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; struct platform_device *__init mx23_add_mxsfb( const struct mxsfb_platform_data *pdata); + +struct platform_device *__init mx23_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 79b94523954a..c8887103f0e3 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -45,3 +45,8 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst; struct platform_device *__init mx28_add_mxsfb( const struct mxsfb_platform_data *pdata); + +extern const struct mxs_saif_data mx28_saif_data[] __initconst; +#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id]) + +struct platform_device *__init mx28_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index acf9eea124c0..18b6bf526a27 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -23,3 +23,9 @@ config MXS_HAVE_PLATFORM_MXS_PWM config MXS_HAVE_PLATFORM_MXSFB bool + +config MXS_HAVE_PLATFORM_MXS_SAIF + bool + +config MXS_HAVE_PLATFORM_RTC_STMP3XXX + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 351915c683ff..f52e3e53baec 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c new file mode 100644 index 000000000000..1ec965e9fe92 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c @@ -0,0 +1,60 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_saif_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \ + .irq = soc ## _INT_SAIF ## _id, \ + .dma = soc ## _DMA_SAIF ## _id, \ + .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \ + } + +#define mxs_saif_data_entry(soc, _id) \ + [_id] = mxs_saif_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_saif_data mx28_saif_data[] __initconst = { + mxs_saif_data_entry(MX28, 0), + mxs_saif_data_entry(MX28, 1), +}; +#endif + +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dma, + .end = data->dma, + .flags = IORESOURCE_DMA, + }, { + .start = data->dmairq, + .end = data->dmairq, + .flags = IORESOURCE_IRQ, + }, + + }; + + return mxs_add_platform_device("mxs-saif", data->id, res, + ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c new file mode 100644 index 000000000000..639eaee15553 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#ifdef CONFIG_SOC_IMX23 +struct platform_device *__init mx23_add_rtc_stmp3xxx(void) +{ + struct resource res[] = { + { + .start = MX23_RTC_BASE_ADDR, + .end = MX23_RTC_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MX23_INT_RTC_ALARM, + .end = MX23_INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res), + NULL, 0); +} +#endif /* CONFIG_SOC_IMX23 */ + +#ifdef CONFIG_SOC_IMX28 +struct platform_device *__init mx28_add_rtc_stmp3xxx(void) +{ + struct resource res[] = { + { + .start = MX28_RTC_BASE_ADDR, + .end = MX28_RTC_BASE_ADDR + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MX28_INT_RTC_ALARM, + .end = MX28_INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res), + NULL, 0); +} +#endif /* CONFIG_SOC_IMX28 */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 812d7a813a78..a8080f44c03d 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -92,3 +92,15 @@ struct platform_device *__init mxs_add_mxs_mmc( /* pwm */ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); + +/* saif */ +struct mxs_saif_data { + int id; + resource_size_t iobase; + resource_size_t irq; + resource_size_t dma; + resource_size_t dmairq; +}; + +struct platform_device *__init mxs_add_saif( + const struct mxs_saif_data *data); diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index 3c2de33803ab..2c8eb7c43f82 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -167,6 +167,7 @@ static void __init mx23evk_init(void) gpio_set_value(MX23EVK_BL_ENABLE, 1); mx23_add_mxsfb(&mx23evk_mxsfb_pdata); + mx23_add_rtc_stmp3xxx(); } static void __init mx23evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eaaf6ff28990..4a3cca3725f2 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -18,6 +18,9 @@ #include <linux/leds.h> #include <linux/irq.h> #include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -183,6 +186,24 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* led */ MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_I2C0_SDA__I2C0_SDA | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), }; /* led */ @@ -352,6 +373,50 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { }, }; +static struct i2c_board_info mxs_i2c0_board_info[] __initdata = { + { + I2C_BOARD_INFO("sgtl5000", 0x0a), + }, +}; + +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data mx28evk_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = mx28evk_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies), +}; + +static struct fixed_voltage_config mx28evk_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &mx28evk_vdd_reg_init_data, +}; +static struct platform_device mx28evk_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mx28evk_vdd_pdata, + }, +}; +static void __init mx28evk_add_regulators(void) +{ + platform_device_register(&mx28evk_voltage_regulator); +} +#else +static void __init mx28evk_add_regulators(void) {} +#endif + static void __init mx28evk_init(void) { int ret; @@ -392,6 +457,18 @@ static void __init mx28evk_init(void) mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + mx28_add_saif(0); + mx28_add_saif(1); + + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, mxs_i2c0_board_info, + ARRAY_SIZE(mxs_i2c0_board_info)); + + mx28evk_add_regulators(); + + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, + NULL, 0); + /* power on mmc slot by writing 0 to the gpio */ ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power"); @@ -404,6 +481,7 @@ static void __init mx28evk_init(void) if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + mx28_add_rtc_stmp3xxx(); gpio_led_register_device(0, &mx28evk_led_data); } diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 7f38d82b69af..afec337cb0c4 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -91,6 +91,7 @@ static void __init stmp378x_dvb_init(void) mx23_add_duart(); mx23_add_auart0(); + mx23_add_rtc_stmp3xxx(); /* power on mmc slot */ ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER, diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 515a423f82cd..ce5d5632e62f 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -161,6 +161,7 @@ static void __init tx28_stk5v3_init(void) i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); + mx28_add_rtc_stmp3xxx(); } static void __init tx28_timer_init(void) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4ae6257b39a4..57b66d590c52 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5f2b55ff04ff..933e9353cb37 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568a..3ae16b4e3f52 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -491,23 +491,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index f2ea6453ade0..a018a7327879 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc219..655e9480eb98 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 2ce2fb7664bc..34c01a7de810 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** @@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e9640728239b..cf1de7d2630d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2543342dbccb..daa056ed8738 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } -static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - +#if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} +#endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 9026249233ad..af0c2fe1ea37 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -65,7 +65,7 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8915.h> +#include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> @@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8915_retune_mobile_config wm8915_retune[] = { +static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", .rate = 48000, @@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = { }, }; -static struct wm8915_pdata wm8915_pdata __initdata = { +static struct wm8996_pdata wm8996_pdata __initdata = { .ldo_ena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .micdet_def = 1, - .inl_mode = WM8915_DIFFERRENTIAL_1, - .inr_mode = WM8915_DIFFERRENTIAL_1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, .irq_flags = IRQF_TRIGGER_RISING, @@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = { 0x020e, /* GPIO5 == CLKOUT */ }, - .retune_mobile_cfgs = wm8915_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune), + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), }; static struct wm8962_pdata wm8962_pdata __initdata = { @@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = { .platform_data = &glenfarclas_pmic_pdata }, { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8915", 0x1a), - .platform_data = &wm8915_pdata, + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 964c6c3cd7a6..dd39fee59549 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <mach/nanoengine.h> +#include <mach/hardware.h> static DEFINE_SPINLOCK(nano_lock); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index be7c638b648b..cfbcf8b95599 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/uaccess.h> +#include <asm/system.h> #include <asm/unaligned.h> #include "fault.h" @@ -95,6 +96,33 @@ static const char *usermode_action[] = { "signal+warn" }; +/* Return true if and only if the ARMv6 unaligned access model is in use. */ +static bool cpu_is_v6_unaligned(void) +{ + return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); +} + +static int safe_usermode(int new_usermode, bool warn) +{ + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) { + new_usermode |= UM_FIXUP; + + if (warn) + printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); + } + + return new_usermode; +} + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); @@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = safe_usermode(mode - '0', true); } return count; } @@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & UM_SIGNAL) - force_sig(SIGBUS, current); - else { + if (ai_usermode & UM_SIGNAL) { + siginfo_t si; + + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)addr; + + force_sig_info(si.si_signo, &si, current); + } else { /* * We're about to disable the alignment trap and return to * user space. But if an interrupt occurs before actually @@ -926,20 +961,11 @@ static int __init alignment_init(void) return -ENOMEM; #endif - /* - * ARMv6 and later CPUs can perform unaligned accesses for - * most single load and store instructions up to word size. - * LDM, STM, LDRD and STRD still need to be handled. - * - * Ignoring the alignment fault is not an option on these - * CPUs since we spin re-faulting the instruction without - * making any progress. - */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); - ai_usermode = UM_FIXUP; + ai_usermode = safe_usermode(ai_usermode, false); } hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2fee782077c1..91bca355cd31 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) static inline void poison_init_mem(void *s, size_t count) { u32 *p = (u32 *)s; - while ((count = count - 4)) + for (; count != 0; count -= 4) *p++ = 0xe7fddef0; } diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f8f7ea34bfc5..683af3a182b7 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -410,6 +410,7 @@ __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 + .long 0 b __arm946_setup .long cpu_arch_name .long cpu_elf_name @@ -418,6 +419,6 @@ __arm946_proc_info: .long arm946_processor_functions .long 0 .long 0 - .long arm940_cache_fns + .long arm946_cache_fns .size __arm946_proc_info, . - __arm946_proc_info diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index a5353fc0793f..502e45f03178 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,50 +4,31 @@ source "arch/arm/plat-mxc/devices/Kconfig" menu "Freescale MXC Implementations" -config ARCH_MX50_SUPPORTED - bool - -config ARCH_MX53_SUPPORTED - bool - choice prompt "Freescale CPU family:" default ARCH_MX3 -config ARCH_MX1 - bool "MX1-based" - help - This enables support for systems based on the Freescale i.MX1 family - -config ARCH_MX2 - bool "MX2-based" - help - This enables support for systems based on the Freescale i.MX2 family - -config ARCH_MX25 - bool "MX25-based" +config ARCH_IMX_V4_V5 + bool "i.MX1, i.MX21, i.MX25, i.MX27" + select AUTO_ZRELADDR + select ARM_PATCH_PHYS_VIRT help - This enables support for systems based on the Freescale i.MX25 family + This enables support for systems based on the Freescale i.MX ARMv4 + and ARMv5 SoCs config ARCH_MX3 bool "MX3-based" help This enables support for systems based on the Freescale i.MX3 family -config ARCH_MX503 - bool "i.MX50 + i.MX53" - select ARCH_MX50_SUPPORTED - select ARCH_MX53_SUPPORTED +config ARCH_MX5 + bool "i.MX50, i.MX51, i.MX53" + select AUTO_ZRELADDR + select ARM_PATCH_PHYS_VIRT help This enables support for machines using Freescale's i.MX50 and i.MX51 processors. -config ARCH_MX51 - bool "i.MX51" - select ARCH_MX51_SUPPORTED - help - This enables support for systems based on the Freescale i.MX51 family - endchoice source "arch/arm/mach-imx/Kconfig" diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 55d2534ec727..8875fb415f68 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -50,6 +50,8 @@ void __iomem *avic_base; +static u32 avic_saved_mask_reg[2]; + #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -90,24 +92,8 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) } #endif /* CONFIG_FIQ */ -/* Disable interrupt number "irq" in the AVIC */ -static void mxc_mask_irq(struct irq_data *d) -{ - __raw_writel(d->irq, avic_base + AVIC_INTDISNUM); -} -/* Enable interrupt number "irq" in the AVIC */ -static void mxc_unmask_irq(struct irq_data *d) -{ - __raw_writel(d->irq, avic_base + AVIC_INTENNUM); -} - -static struct mxc_irq_chip mxc_avic_chip = { - .base = { - .irq_ack = mxc_mask_irq, - .irq_mask = mxc_mask_irq, - .irq_unmask = mxc_unmask_irq, - }, +static struct mxc_extra_irq avic_extra_irq = { #ifdef CONFIG_MXC_IRQ_PRIOR .set_priority = avic_irq_set_priority, #endif @@ -116,6 +102,68 @@ static struct mxc_irq_chip mxc_avic_chip = { #endif }; +#ifdef CONFIG_PM +static void avic_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = gc->irq_base >> 5; + + avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); + __raw_writel(gc->wake_active, avic_base + ct->regs.mask); +} + +static void avic_irq_resume(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct irq_chip_type *ct = gc->chip_types; + int idx = gc->irq_base >> 5; + + __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); +} + +#else +#define avic_irq_suspend NULL +#define avic_irq_resume NULL +#endif + +static __init void avic_init_gc(unsigned int irq_start) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int idx = irq_start >> 5; + + gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base, + handle_level_irq); + gc->private = &avic_extra_irq; + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_ack = irq_gc_mask_clr_bit; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = avic_irq_suspend; + ct->chip.irq_resume = avic_irq_resume; + ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH; + ct->regs.ack = ct->regs.mask; + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +{ + u32 nivector; + + do { + nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16; + if (nivector == 0xffff) + break; + + handle_IRQ(nivector, regs); + } while (1); +} + /* * This function initializes the AVIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions @@ -140,11 +188,9 @@ void __init mxc_init_irq(void __iomem *irqbase) /* all IRQ no FIQ */ __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); - for (i = 0; i < AVIC_NUM_IRQS; i++) { - irq_set_chip_and_handler(i, &mxc_avic_chip.base, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } + + for (i = 0; i < AVIC_NUM_IRQS; i += 32) + avic_init_gc(i); /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) @@ -157,4 +203,3 @@ void __init mxc_init_irq(void __iomem *irqbase) printk(KERN_INFO "MXC IRQ initialized\n"); } - diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c index 386e0d52cf58..f5b7e0fa237f 100644 --- a/arch/arm/plat-mxc/cpu.c +++ b/arch/arm/plat-mxc/cpu.c @@ -1,5 +1,6 @@ #include <linux/module.h> +#include <mach/hardware.h> unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); @@ -9,3 +10,11 @@ void mxc_set_cpu_type(unsigned int type) __mxc_cpu_type = type; } +void imx_print_silicon_rev(const char *cpu, int srev) +{ + if (srev == IMX_CHIP_REVISION_UNKNOWN) + pr_info("CPU identified as %s, unknown revision\n", cpu); + else + pr_info("CPU identified as %s, silicon rev %d.%d\n", + cpu, (srev >> 4) & 0xf, srev & 0xf); +} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4e3d97890d69..5bee446db51f 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -72,4 +72,19 @@ extern void mxc_arch_reset_init(void __iomem *); extern void mx51_efikamx_reset(void); extern int mx53_revision(void); extern int mx53_display_revision(void); +extern void imx_print_silicon_rev(const char *cpu, int srev); + +void avic_handle_irq(struct pt_regs *); +void tzic_handle_irq(struct pt_regs *); + +#define imx1_handle_irq avic_handle_irq +#define imx21_handle_irq avic_handle_irq +#define imx25_handle_irq avic_handle_irq +#define imx27_handle_irq avic_handle_irq +#define imx31_handle_irq avic_handle_irq +#define imx35_handle_irq avic_handle_irq +#define imx50_handle_irq tzic_handle_irq +#define imx51_handle_irq tzic_handle_irq +#define imx53_handle_irq tzic_handle_irq + #endif diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 91fc7cdb5dc9..e4dde91f0231 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,6 +44,14 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif +/* iMX50/53 have same addresses, but not iMX51 */ +#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 066d464d322d..842fbcb0d6cc 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -9,72 +9,16 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> +/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */ -#define AVIC_NIMASK 0x04 - - @ this macro disables fast irq (not implemented) .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp -#ifndef CONFIG_MXC_TZIC - ldr \base, =avic_base - ldr \base, [\base] -#ifdef CONFIG_MXC_IRQ_PRIOR - ldr r4, [\base, #AVIC_NIMASK] -#endif -#elif defined CONFIG_MXC_TZIC - ldr \base, =tzic_base - ldr \base, [\base] -#endif /* CONFIG_MXC_TZIC */ .endm .macro arch_ret_to_user, tmp1, tmp2 .endm - @ this macro checks which interrupt occurred - @ and returns its number in irqnr - @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#ifndef CONFIG_MXC_TZIC - @ Load offset & priority of the highest priority - @ interrupt pending from AVIC_NIVECSR - ldr \irqstat, [\base, #0x40] - @ Shift to get the decoded IRQ number, using ASR so - @ 'no interrupt pending' becomes 0xffffffff - mov \irqnr, \irqstat, asr #16 - @ set zero flag if IRQ + 1 == 0 - adds \tmp, \irqnr, #1 -#ifdef CONFIG_MXC_IRQ_PRIOR - bicne \tmp, \irqstat, #0xFFFFFFE0 - strne \tmp, [\base, #AVIC_NIMASK] - streq r4, [\base, #AVIC_NIMASK] -#endif -#elif defined CONFIG_MXC_TZIC - @ Load offset & priority of the highest priority - @ interrupt pending. - @ 0x080 is INTSEC0 register - @ 0xD80 is HIPND0 register - mov \irqnr, #0 -1000: add \irqstat, \base, \irqnr, lsr #3 - ldr \tmp, [\irqstat, #0xd80] - ldr \irqstat, [\irqstat, #0x080] - ands \tmp, \tmp, \irqstat - bne 1001f - add \irqnr, \irqnr, #32 - cmp \irqnr, #128 - blo 1000b - b 2001f -1001: mov \irqstat, #1 -1002: tst \tmp, \irqstat - bne 2002f - movs \tmp, \tmp, lsr #1 - addne \irqnr, \irqnr, #1 - bne 1002b -2001: - mov \irqnr, #0 -2002: - movs \irqnr, \irqnr -#endif .endm diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index c92f0b1f216f..63f22a009a65 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -735,6 +735,7 @@ enum iomux_pins { #define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC) /* diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 9440b9e00e89..5408fd1fc736 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -30,6 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \ + | PAD_CTL_HYS) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -1256,7 +1259,7 @@ #define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1264,7 +1267,7 @@ #define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1536,7 +1539,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1544,7 +1547,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1631,25 +1634,25 @@ #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1672,7 +1675,7 @@ #define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1732,7 +1735,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2297,7 +2300,7 @@ #define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2305,7 +2308,7 @@ #define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2333,7 +2336,7 @@ #define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2356,7 +2359,7 @@ #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 11be5cdbdd1a..35e6c7f4ffd1 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -21,22 +21,8 @@ #define MX53_PHYS_OFFSET UL(0x70000000) #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) -# if defined CONFIG_ARCH_MX1 -# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET -# elif defined CONFIG_MACH_MX21 -# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX25 -# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET -# elif defined CONFIG_MACH_MX27 -# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX3 +# if defined CONFIG_ARCH_MX3 # define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX50 -# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX51 -# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX53 -# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET # endif #endif diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 087cd7ac8d52..ccebf5ba12f0 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -41,6 +41,7 @@ #define MX25_SSI2_BASE_ADDR 0x50014000 #define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 +#define MX25_IIM_BASE_ADDR 0x53ff0000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 #define MX25_ESDHC1_BASE_ADDR 0x53fb4000 #define MX25_ESDHC2_BASE_ADDR 0x53fb8000 @@ -104,4 +105,8 @@ #define MX25_DMA_REQ_SSI1_RX0 28 #define MX25_DMA_REQ_SSI1_TX0 29 +#ifndef __ASSEMBLY__ +extern int mx25_revision(void); +#endif + #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 388a407d72d6..30dbf424583e 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -187,22 +187,8 @@ /* Mandatory defines used globally */ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -extern unsigned int mx31_cpu_rev; -extern void mx31_read_cpu_rev(void); - -static inline int mx31_revision(void) -{ - return mx31_cpu_rev; -} - -extern unsigned int mx35_cpu_rev; -extern void mx35_read_cpu_rev(void); - -static inline int mx35_revision(void) -{ - return mx35_cpu_rev; -} +extern int mx35_revision(void); +extern int mx31_revision(void); #endif #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c index 96953e2e4f11..b6e11458e5ae 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/plat-mxc/irq-common.c @@ -23,17 +23,17 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio) { - struct mxc_irq_chip *chip; - struct irq_chip *base; + struct irq_chip_generic *gc; + struct mxc_extra_irq *exirq; int ret; ret = -ENOSYS; - base = irq_get_chip(irq); - if (base) { - chip = container_of(base, struct mxc_irq_chip, base); - if (chip->set_priority) - ret = chip->set_priority(irq, prio); + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + exirq = gc->private; + if (exirq->set_priority) + ret = exirq->set_priority(irq, prio); } return ret; @@ -43,15 +43,16 @@ EXPORT_SYMBOL(imx_irq_set_priority); int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { struct irq_chip_generic *gc; - int (*set_irq_fiq)(unsigned int, unsigned int); + struct mxc_extra_irq *exirq; int ret; ret = -ENOSYS; gc = irq_get_chip_data(irq); if (gc && gc->private) { - set_irq_fiq = gc->private; - ret = set_irq_fiq(irq, type); + exirq = gc->private; + if (exirq->set_irq_fiq) + ret = exirq->set_irq_fiq(irq, type); } return ret; diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h index 7203543fb1b3..6ccb3a14c693 100644 --- a/arch/arm/plat-mxc/irq-common.h +++ b/arch/arm/plat-mxc/irq-common.h @@ -19,9 +19,8 @@ #ifndef __PLAT_MXC_IRQ_COMMON_H__ #define __PLAT_MXC_IRQ_COMMON_H__ -struct mxc_irq_chip +struct mxc_extra_irq { - struct irq_chip base; int (*set_priority)(unsigned char irq, unsigned char prio); int (*set_irq_fiq)(unsigned int irq, unsigned int type); }; diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 761c3c940a68..42d74ea59084 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -57,7 +57,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) return -EINVAL; - if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { + if (!(cpu_is_mx1() || cpu_is_mx21())) { unsigned long long c; unsigned long period_cycles, duty_cycles, prescale; u32 cr; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index f257fccdc394..e993a184189a 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -42,7 +42,7 @@ #define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ #define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ #define TZIC_PND0 0x0D00 /* Pending Register 0 */ -#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */ +#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */ #define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ @@ -74,6 +74,12 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) static unsigned int *wakeup_intr[4]; +static struct mxc_extra_irq tzic_extra_irq = { +#ifdef CONFIG_FIQ + .set_irq_fiq = tzic_set_irq_fiq, +#endif +}; + static __init void tzic_init_gc(unsigned int irq_start) { struct irq_chip_generic *gc; @@ -82,7 +88,7 @@ static __init void tzic_init_gc(unsigned int irq_start) gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, handle_level_irq); - gc->private = tzic_set_irq_fiq; + gc->private = &tzic_extra_irq; gc->wake_enabled = IRQ_MSK(32); wakeup_intr[idx] = &gc->wake_active; @@ -96,6 +102,28 @@ static __init void tzic_init_gc(unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } +asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +{ + u32 stat; + int i, irqofs, handled; + + do { + handled = 0; + + for (i = 0; i < 4; i++) { + stat = __raw_readl(tzic_base + TZIC_HIPND(i)) & + __raw_readl(tzic_base + TZIC_INTSEC0(i)); + + while (stat) { + handled = 1; + irqofs = fls(stat) - 1; + handle_IRQ(irqofs + i * 32, regs); + stat &= ~(1 << irqofs); + } + } + } while (handled); +} + /* * This function initializes the TZIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6e6735f04ee3..bb8f4a6b3e37 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,7 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf770..dc562a5c0a8a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f3..30e10719b774 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea2..de3b10c18127 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index c60737c49a32..79e7fedb8602 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a7..fff68d0d521b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 |
