diff options
Diffstat (limited to 'arch/arm')
193 files changed, 18858 insertions, 5745 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006e..ac1bef1797e6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -255,6 +255,7 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO + select HAVE_GPIO_LIB help This enables support for the Cirrus EP93xx series of CPUs. @@ -377,15 +378,17 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -config ARCH_ORION +config ARCH_ORION5X bool "Marvell Orion" depends on MMU select PCI select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select PLAT_ORION help - Support for Marvell Orion System on Chip family. + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.) config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" @@ -422,10 +425,15 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL select ARCH_MTD_XIP select GENERIC_GPIO select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT select HAVE_IDE + select HAVE_GPIO_LIB help Support for StrongARM 11x0 based boards. @@ -516,7 +524,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" -source "arch/arm/mach-orion/Kconfig" +source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" @@ -563,6 +571,9 @@ config ARCH_ACORN config PLAT_IOP bool +config PLAT_ORION + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -650,7 +661,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP + depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -683,7 +694,7 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && REALVIEW_EB_ARM11MP + depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP) default y help Enable support for local timers on SMP platforms, rather then the @@ -774,6 +785,12 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +config ARCH_SPARSEMEM_ENABLE + bool + +config ARCH_SELECT_MEMORY_MODEL + bool + config NODES_SHIFT int default "4" if ARCH_LH7A40X diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1a4649667ec8..e72db27e0ba0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -134,12 +134,11 @@ endif machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx - textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000 machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_ORION) := orion + machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) @@ -185,6 +184,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/ # If we have a common platform directory, then include it in the build. core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ +core-$(CONFIG_PLAT_ORION) += arch/arm/plat-orion/ core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 25f12303b106..da226abce2d0 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -61,9 +61,15 @@ endif quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(ZRELADDR) -e $(ZRELADDR) \ + -C none -a $(LOADADDR) -e $(LOADADDR) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ +ifeq ($(CONFIG_ZBOOT_ROM),y) +$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) +else +$(obj)/uImage: LOADADDR=$(ZRELADDR) +endif + $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) @echo ' Image $@ is ready' diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 314ebd3a1d71..bc299b07a6fa 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/hardware/scoop.h> /* PCMCIA to Scoop linkage @@ -30,10 +31,9 @@ struct scoop_pcmcia_config *platform_scoop_config; EXPORT_SYMBOL(platform_scoop_config); -#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) - struct scoop_dev { - void *base; + void __iomem *base; + struct gpio_chip gpio; spinlock_t scoop_lock; unsigned short suspend_clr; unsigned short suspend_set; @@ -44,13 +44,84 @@ void reset_scoop(struct device *dev) { struct scoop_dev *sdev = dev_get_drvdata(dev); - SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100; // 00 - SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000; // 04 - SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000; // 10 - SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000; // 18 - SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF; // 14 - SCOOP_REG(sdev->base,SCOOP_ISR) = 0x0000; // 1C - SCOOP_REG(sdev->base,SCOOP_IRM) = 0x0000; + iowrite16(0x0100, sdev->base + SCOOP_MCR); // 00 + iowrite16(0x0000, sdev->base + SCOOP_CDR); // 04 + iowrite16(0x0000, sdev->base + SCOOP_CCR); // 10 + iowrite16(0x0000, sdev->base + SCOOP_IMR); // 18 + iowrite16(0x00FF, sdev->base + SCOOP_IRM); // 14 + iowrite16(0x0000, sdev->base + SCOOP_ISR); // 1C + iowrite16(0x0000, sdev->base + SCOOP_IRM); +} + +static void __scoop_gpio_set(struct scoop_dev *sdev, + unsigned offset, int value) +{ + unsigned short gpwr; + + gpwr = ioread16(sdev->base + SCOOP_GPWR); + if (value) + gpwr |= 1 << (offset + 1); + else + gpwr &= ~(1 << (offset + 1)); + iowrite16(gpwr, sdev->base + SCOOP_GPWR); +} + +static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); +} + +static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + + /* XXX: I'm usure, but it seems so */ + return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); +} + +static int scoop_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr &= ~(1 << (offset + 1)); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; +} + +static int scoop_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr |= 1 << (offset + 1); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; } unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) @@ -60,8 +131,8 @@ unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) struct scoop_dev *sdev = dev_get_drvdata(dev); spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) | bit; - SCOOP_REG(sdev->base, SCOOP_GPWR) = gpio_bit; + gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit; + iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); spin_unlock_irqrestore(&sdev->scoop_lock, flag); return gpio_bit; @@ -74,8 +145,8 @@ unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit) struct scoop_dev *sdev = dev_get_drvdata(dev); spin_lock_irqsave(&sdev->scoop_lock, flag); - gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) & ~bit; - SCOOP_REG(sdev->base,SCOOP_GPWR) = gpio_bit; + gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit; + iowrite16(gpio_bit, sdev->base + SCOOP_GPWR); spin_unlock_irqrestore(&sdev->scoop_lock, flag); return gpio_bit; @@ -87,13 +158,13 @@ EXPORT_SYMBOL(reset_scoop_gpio); unsigned short read_scoop_reg(struct device *dev, unsigned short reg) { struct scoop_dev *sdev = dev_get_drvdata(dev); - return SCOOP_REG(sdev->base,reg); + return ioread16(sdev->base + reg); } void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data) { struct scoop_dev *sdev = dev_get_drvdata(dev); - SCOOP_REG(sdev->base,reg)=data; + iowrite16(data, sdev->base + reg); } EXPORT_SYMBOL(reset_scoop); @@ -104,9 +175,9 @@ static void check_scoop_reg(struct scoop_dev *sdev) { unsigned short mcr; - mcr = SCOOP_REG(sdev->base, SCOOP_MCR); + mcr = ioread16(sdev->base + SCOOP_MCR); if ((mcr & 0x100) == 0) - SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101; + iowrite16(0x0101, sdev->base + SCOOP_MCR); } #ifdef CONFIG_PM @@ -115,8 +186,8 @@ static int scoop_suspend(struct platform_device *dev, pm_message_t state) struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); - SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; + sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR); + iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR); return 0; } @@ -126,7 +197,7 @@ static int scoop_resume(struct platform_device *dev) struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); - SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; + iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR); return 0; } @@ -135,11 +206,13 @@ static int scoop_resume(struct platform_device *dev) #define scoop_resume NULL #endif -int __init scoop_probe(struct platform_device *pdev) +static int __devinit scoop_probe(struct platform_device *pdev) { struct scoop_dev *devptr; struct scoop_config *inf; struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret; + int temp; if (!mem) return -EINVAL; @@ -154,40 +227,78 @@ int __init scoop_probe(struct platform_device *pdev) devptr->base = ioremap(mem->start, mem->end - mem->start + 1); if (!devptr->base) { - kfree(devptr); - return -ENOMEM; + ret = -ENOMEM; + goto err_ioremap; } platform_set_drvdata(pdev, devptr); - printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base); + printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base); - SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140; + iowrite16(0x0140, devptr->base + SCOOP_MCR); reset_scoop(&pdev->dev); - SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000; - SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; - SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; + iowrite16(0x0000, devptr->base + SCOOP_CPR); + iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR); + iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR); devptr->suspend_clr = inf->suspend_clr; devptr->suspend_set = inf->suspend_set; + devptr->gpio.base = -1; + + if (inf->gpio_base != 0) { + devptr->gpio.label = pdev->dev.bus_id; + devptr->gpio.base = inf->gpio_base; + devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */ + devptr->gpio.set = scoop_gpio_set; + devptr->gpio.get = scoop_gpio_get; + devptr->gpio.direction_input = scoop_gpio_direction_input; + devptr->gpio.direction_output = scoop_gpio_direction_output; + + ret = gpiochip_add(&devptr->gpio); + if (ret) + goto err_gpio; + } + return 0; + + if (devptr->gpio.base != -1) + temp = gpiochip_remove(&devptr->gpio); +err_gpio: + platform_set_drvdata(pdev, NULL); +err_ioremap: + iounmap(devptr->base); + kfree(devptr); + + return ret; } -static int scoop_remove(struct platform_device *pdev) +static int __devexit scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); - if (sdev) { - iounmap(sdev->base); - kfree(sdev); - platform_set_drvdata(pdev, NULL); + int ret; + + if (!sdev) + return -EINVAL; + + if (sdev->gpio.base != -1) { + ret = gpiochip_remove(&sdev->gpio); + if (ret) { + dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret); + return ret; + } } + + platform_set_drvdata(pdev, NULL); + iounmap(sdev->base); + kfree(sdev); + return 0; } static struct platform_driver scoop_driver = { .probe = scoop_probe, - .remove = scoop_remove, + .remove = __devexit_p(scoop_remove), .suspend = scoop_suspend, .resume = scoop_resume, .driver = { @@ -195,7 +306,7 @@ static struct platform_driver scoop_driver = { }, }; -int __init scoop_init(void) +static int __init scoop_init(void) { return platform_driver_register(&scoop_driver); } diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig new file mode 100644 index 000000000000..dc030cfe5009 --- /dev/null +++ b/arch/arm/configs/am200epdkit_defconfig @@ -0,0 +1,1149 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc3 +# Sun Mar 9 06:33:33 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="gum" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +CONFIG_ARCH_GUMSTIX=y +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_MACH_GUMSTIX_F=y +CONFIG_PXA25x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +# CONFIG_PCMCIA_IOCTL is not set + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=2 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +CONFIG_SMC91X=m +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SA1100_WATCHDOG=m + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +CONFIG_FB_VIRTUAL=m +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index e10d003566d6..2dbbbc3d4ac3 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -620,14 +620,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 834dddb51314..6e994f7820c6 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -594,14 +594,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 46b0c734aeb9..f659c938473f 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -1,43 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc6 -# Fri Nov 17 18:42:21 2006 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:20:50 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -53,30 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -121,29 +138,52 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_AT91SAM9260=y # CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set # -# AT91SAM9260 Board Type +# AT91SAM9260 / AT91SAM9XE Board Type # CONFIG_MACH_AT91SAM9260EK=y +# CONFIG_MACH_CAM60 is not set +# CONFIG_MACH_SAM9_L9260 is not set # # AT91 Board Options # +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -166,19 +206,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -191,8 +231,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -203,6 +247,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -228,7 +273,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -238,13 +283,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -263,33 +304,23 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -302,10 +333,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -315,7 +342,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -324,34 +361,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -360,15 +380,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -388,6 +412,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -395,43 +421,72 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support +# USB Network Adapters # -# CONFIG_NETDEVICES is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -439,6 +494,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -448,7 +504,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -458,6 +513,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -492,114 +548,131 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y # -# Ftape, the floppy tape device driver +# I2C Algorithms # -# CONFIG_RAW_DRIVER is not set +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# TPM devices +# I2C Hardware Bus support # -# CONFIG_TCG_TPM is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set # -# I2C support +# Miscellaneous I2C Chip support # -# CONFIG_I2C is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -610,7 +683,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -619,9 +692,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -640,6 +715,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -650,43 +726,10 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -708,6 +751,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -717,6 +761,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -727,13 +772,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -745,17 +796,56 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# MMC/SD Card support +# RTC interfaces # -# CONFIG_MMC is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# Real Time Clock +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -806,7 +896,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -825,10 +914,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -836,17 +922,12 @@ CONFIG_CRAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -887,41 +968,49 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -932,18 +1021,21 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index fcd8fa091e9d..3802e85f7483 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -1,43 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc6 -# Fri Nov 17 18:00:38 2006 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:21:49 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -53,30 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -121,14 +138,27 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_AT91SAM9260 is not set CONFIG_ARCH_AT91SAM9261=y +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9261 Board Type @@ -138,12 +168,15 @@ CONFIG_MACH_AT91SAM9261EK=y # # AT91 Board Options # +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -166,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -191,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -203,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -228,7 +266,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -238,13 +276,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -266,30 +304,20 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -302,10 +330,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -315,7 +339,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -324,20 +358,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -350,12 +378,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -375,7 +405,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -386,6 +415,8 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -397,35 +428,24 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -434,15 +454,19 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -462,6 +486,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -469,75 +495,49 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -545,10 +545,6 @@ CONFIG_DM9000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -556,6 +552,7 @@ CONFIG_DM9000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -565,23 +562,43 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # @@ -609,75 +626,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_PCA is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -686,70 +675,125 @@ CONFIG_I2C_AT91=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Dallas's 1-wire bus +# SPI Master Controller Drivers # -# CONFIG_W1 is not set +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set # -# Hardware Monitoring support +# SPI Protocol Masters # +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_INTSRAM is not set +# CONFIG_FB_ATMEL_STN is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -760,7 +804,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -769,9 +813,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -790,6 +836,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -800,43 +847,10 @@ CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -858,6 +872,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -867,6 +882,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -877,13 +893,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -895,21 +917,73 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=m -# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -960,7 +1034,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -973,7 +1046,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set @@ -981,10 +1053,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -992,17 +1061,12 @@ CONFIG_CRAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1043,41 +1107,49 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1088,18 +1160,21 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index c72ab82873d5..32a0d74e0c89 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -1,12 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc1 -# Mon Jan 8 16:06:54 2007 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:12:20 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -15,32 +21,36 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -56,32 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -113,13 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -127,15 +138,27 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set # CONFIG_ARCH_AT91SAM9260 is not set # CONFIG_ARCH_AT91SAM9261 is not set CONFIG_ARCH_AT91SAM9263=y +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9263 Board Type @@ -152,6 +175,8 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y # AT91 Feature Selections # # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -174,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -199,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -211,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -236,7 +266,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -# CONFIG_APM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -246,7 +276,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -271,6 +300,7 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y @@ -281,20 +311,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -307,10 +325,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -320,7 +334,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -329,20 +353,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -362,6 +380,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -381,7 +400,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -405,35 +423,24 @@ CONFIG_MTD_DATAFLASH=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -443,15 +450,18 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -473,6 +483,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -480,80 +491,65 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -561,10 +557,6 @@ CONFIG_MII=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -572,6 +564,7 @@ CONFIG_MII=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -581,20 +574,26 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -603,6 +602,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # @@ -636,71 +636,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_PCA is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -722,61 +698,80 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # -# CONFIG_TIFM_CORE is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# LED devices +# USB-based Watchdog Cards # -# CONFIG_NEW_LEDS is not set +# CONFIG_USBPCWATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -784,26 +779,28 @@ CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y +# CONFIG_USB_HID is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -814,9 +811,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -824,9 +820,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -845,6 +843,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -856,43 +855,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -914,6 +880,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -923,6 +890,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -933,13 +901,19 @@ CONFIG_USB_MON=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -951,21 +925,73 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=m -# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_MMC_AT91=m +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -1016,7 +1042,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1032,10 +1057,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -1044,10 +1071,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set @@ -1057,6 +1081,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1064,17 +1089,12 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1115,36 +1135,35 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1152,9 +1171,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1165,10 +1188,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1177,8 +1197,13 @@ CONFIG_DEBUG_LL=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index fbe8b3049343..98e6746d02be 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Mon May 7 16:30:40 2007 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 8 22:24:14 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -23,27 +26,28 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -62,32 +66,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -119,14 +121,16 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -134,9 +138,18 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # +# Boot options +# + +# +# Power management +# + +# # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set @@ -144,6 +157,8 @@ CONFIG_ARCH_AT91=y # CONFIG_ARCH_AT91SAM9261 is not set # CONFIG_ARCH_AT91SAM9263 is not set CONFIG_ARCH_AT91SAM9RL=y +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91SAM9RL Board Type @@ -157,7 +172,9 @@ CONFIG_MACH_AT91SAM9RLEK=y # # AT91 Feature Selections # -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=100 # # Processor Type @@ -185,15 +202,14 @@ CONFIG_CPU_CP15_MMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 @@ -206,9 +222,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -245,6 +264,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -254,7 +274,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set @@ -271,10 +290,6 @@ CONFIG_UNIX=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -284,7 +299,16 @@ CONFIG_UNIX=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -293,21 +317,14 @@ CONFIG_UNIX=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -327,6 +344,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -346,7 +364,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -370,36 +387,23 @@ CONFIG_MTD_DATAFLASH=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_AT91=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -410,12 +414,16 @@ CONFIG_BLK_DEV_RAM_SIZE=24576 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -437,6 +445,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -444,47 +453,13 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# # CONFIG_NETDEVICES is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -492,6 +467,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -501,7 +477,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -511,8 +486,10 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -521,6 +498,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # @@ -554,37 +532,50 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y # -# TPM devices +# I2C Algorithms # -# CONFIG_TCG_TPM is not set +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -603,21 +594,25 @@ CONFIG_SPI_ATMEL=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Hardware Monitoring support +# Watchdog Device Drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9_WATCHDOG=y # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -625,37 +620,28 @@ CONFIG_SPI_ATMEL=y # CONFIG_MFD_SM501 is not set # -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -665,9 +651,16 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # +# CONFIG_FB_S1D15605 is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_ATMEL=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -675,97 +668,97 @@ CONFIG_FB_ATMEL=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set # # Sound # -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_SEQ_DUMMY=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -CONFIG_SND_DEBUG_DETECT=y -# CONFIG_SND_PCM_XRUN_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # -# ALSA ARM devices +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# SoC audio support +# USB Gadget Support # -# CONFIG_SND_SOC is not set +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Open Sound System +# MMC/SD Card Drivers # -# CONFIG_SOUND_PRIME is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# HID Devices +# MMC/SD Host Controller Drivers # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB support +# RTC interfaces # -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# I2C RTC drivers # +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# USB Gadget Support +# SPI RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set # -# MMC/SD Card support +# Platform RTC drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91=y +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_AT91SAM9=y # # File systems @@ -816,7 +809,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -836,20 +828,13 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -890,16 +875,15 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -907,8 +891,8 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -916,6 +900,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -923,10 +910,13 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -937,10 +927,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -949,9 +936,12 @@ CONFIG_DEBUG_LL=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index baa97698c744..d846a492e5ce 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -714,7 +714,7 @@ CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # -CONFIG_I2C_AT91=m +CONFIG_I2C_GPIO=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig new file mode 100644 index 000000000000..f3cd4a95373a --- /dev/null +++ b/arch/arm/configs/cam60_defconfig @@ -0,0 +1,1228 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24 +# Thu Mar 6 10:07:26 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + +# +# AT91SAM9260 / AT91SAM9XE Board Type +# +# CONFIG_MACH_AT91SAM9260EK is not set +CONFIG_MACH_CAM60=y +# CONFIG_MACH_SAM9_L9260 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0x20004000 +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_NETWORK_SECMARK=y +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +CONFIG_MAC80211_RCSIMPLE=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=m +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set +CONFIG_MTD_NAND_AT91_ECC_HW=y +# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_TGT_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set +CONFIG_FIXED_PHY=m +# CONFIG_FIXED_MII_10_FDX is not set +# CONFIG_FIXED_MII_100_FDX is not set +# CONFIG_FIXED_MII_1000_FDX is not set +CONFIG_FIXED_MII_AMNT=1 +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_TEST=m + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=m +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 88e5d28aeec7..67e65e4f0cdc 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -1,69 +1,96 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Mon Jan 9 21:51:31 2006 +# Linux kernel version: 2.6.24-rc7 +# Wed Jan 9 22:19:24 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -81,62 +108,101 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y # -# AT91RM9200 Implementations +# Boot options # # +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# # AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set CONFIG_MACH_CSB337=y # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_CHUB is not set +# CONFIG_MACH_HOMEMATIC is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_SWEDATMS is not set + +# +# AT91 Board Options +# # -# AT91RM9200 Feature Selections +# AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set +CONFIG_AT91_TIMER_HZ=128 # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -145,15 +211,13 @@ CONFIG_CPU_TLB_V4WBI=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -168,8 +232,13 @@ CONFIG_AT91_CF=y # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -178,9 +247,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -191,6 +264,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -215,6 +289,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -227,6 +302,10 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -243,23 +322,26 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -269,13 +351,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -285,7 +362,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -294,19 +381,14 @@ CONFIG_TCP_CONG_BIC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -319,11 +401,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -349,15 +434,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0 -CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -368,7 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -378,29 +461,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # CONFIG_MTD_AT91_DATAFLASH is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -409,13 +478,12 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y # CONFIG_IDE is not set # @@ -423,6 +491,9 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -441,97 +512,61 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -539,26 +574,23 @@ CONFIG_ARM_AT91_ETHER=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -568,6 +600,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -583,6 +616,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -601,152 +635,114 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91RM9200_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set CONFIG_AT91_SPI=y CONFIG_AT91_SPIDEV=y - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Multimedia devices +# Watchdog Device Drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -758,12 +754,25 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -771,7 +780,7 @@ CONFIG_USB_DEBUG=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -780,9 +789,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -801,59 +812,21 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -866,15 +839,18 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -899,14 +875,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_EZUSB=y # @@ -914,16 +896,22 @@ CONFIG_USB_EZUSB=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -934,13 +922,19 @@ CONFIG_USB_EZUSB=y # USB Gadget Support # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_AT91=y CONFIG_USB_AT91=y # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -950,22 +944,28 @@ CONFIG_USB_AT91=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_AT91RM9200=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_AT91 is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc1" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -974,39 +974,60 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc1" CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_AT91RM9200=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1030,11 +1051,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1046,7 +1068,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set @@ -1054,10 +1075,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1070,6 +1088,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1077,43 +1096,56 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1124,12 +1156,13 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1138,7 +1171,15 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1149,20 +1190,27 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 669f035896f9..99702146c9fc 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -1,69 +1,112 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Mon Jan 9 21:52:00 2006 +# Linux kernel version: 2.6.25-rc8 +# Fri Apr 4 22:06:15 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -77,66 +120,111 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# # -# AT91RM9200 Implementations +# Atmel AT91 System-on-Chip # +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # # AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set CONFIG_MACH_CSB637=y # CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set # -# AT91RM9200 Feature Selections +# AT91 Board Options +# + +# +# AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -145,15 +233,13 @@ CONFIG_CPU_TLB_V4WBI=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -168,8 +254,13 @@ CONFIG_AT91_CF=y # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -178,9 +269,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -191,6 +286,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set # # Floating point emulation @@ -215,6 +311,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -227,6 +324,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -243,23 +345,26 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -269,13 +374,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -283,9 +383,20 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -294,19 +405,14 @@ CONFIG_TCP_CONG_BIC=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -319,11 +425,14 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -349,15 +458,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0 -CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -368,7 +476,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -377,30 +484,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_AT91_DATAFLASH is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -409,13 +501,15 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_ATMEL_PWM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -423,6 +517,9 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -441,114 +538,78 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -558,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -568,6 +628,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -583,6 +644,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -595,64 +657,29 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91RM9200_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -CONFIG_RTC=y -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_AT91_SPI=y -CONFIG_AT91_SPIDEV=y - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -665,43 +692,53 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # -# Hardware Monitoring support +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -715,39 +752,72 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y # -# Misc devices +# Watchdog Device Drivers # +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y # -# Multimedia Capabilities Port drivers +# USB-based Watchdog Cards # +# CONFIG_USBPCWATCHDOG is not set # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -759,20 +829,34 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -781,9 +865,11 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -802,80 +888,42 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -883,6 +931,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=y CONFIG_USB_SERIAL_KEYSPAN_MPR=y @@ -900,46 +949,66 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=y +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +CONFIG_LEDS_GPIO=y # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# Userspace I/O # -# CONFIG_MMC is not set +# CONFIG_UIO is not set # # File systems @@ -948,16 +1017,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -979,11 +1049,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -995,18 +1066,16 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1019,6 +1088,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1026,45 +1096,57 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1073,12 +1155,14 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1087,7 +1171,18 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1098,20 +1193,29 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig new file mode 100644 index 000000000000..90ed214e3673 --- /dev/null +++ b/arch/arm/configs/ecbat91_defconfig @@ -0,0 +1,1315 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc4 +# Sat Jun 9 01:30:18 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_CHUB is not set +CONFIG_MACH_ECBAT91=y + +# +# AT91 Board Options +# +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ATMEL_TCLIB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +CONFIG_IEEE80211_SOFTMAC=y +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_AT91RM9200_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_AT91_SPI is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ATMEL is not set +CONFIG_SPI_BITBANG=y +CONFIG_SPI_AT91=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index a0f48d54fbcc..ae51a40db6f9 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -587,14 +587,14 @@ CONFIG_I2C_CHARDEV=y # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig new file mode 100644 index 000000000000..4d11678584db --- /dev/null +++ b/arch/arm/configs/magician_defconfig @@ -0,0 +1,1182 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Sun Dec 30 13:02:54 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_MACH_MAGICIAN=y +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="keepinitrd" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +# CONFIG_IRNET is not set +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_PXA_FICP=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x04000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +# CONFIG_SERIAL_PXA_CONSOLE is not set +CONFIG_SERIAL_CORE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_DS1WM=y + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +# CONFIG_APM_POWER is not set +CONFIG_BATTERY_DS2760=y +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_HTC_EGPIO=y +CONFIG_HTC_PASIC3=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_HID=m +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_DEBUG=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig index 0e5794c6a48e..7dc1580e4d99 100644 --- a/arch/arm/configs/ns9xxx_defconfig +++ b/arch/arm/configs/ns9xxx_defconfig @@ -1,621 +1,79 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Thu Feb 15 20:51:47 2007 -# -CONFIG_ARM=y -# CONFIG_GENERIC_TIME is not set -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# +CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set CONFIG_ARCH_NS9XXX=y -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set - -# -# NS9xxx Implementations -# +CONFIG_MACH_A9M9360=y +CONFIG_MACH_A9M9750=y +CONFIG_MACH_CC7UCAMRY=y +CONFIG_MACH_CC9C=y +CONFIG_MACH_CC9P9210=y +CONFIG_MACH_CC9P9210JS=y +CONFIG_MACH_CC9P9215=y +CONFIG_MACH_CC9P9215JS=y CONFIG_MACH_CC9P9360DEV=y -CONFIG_PROCESSOR_NS9360=y -CONFIG_BOARD_A9M9750DEV=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# +CONFIG_MACH_CC9P9360JS=y +CONFIG_MACH_CC9P9360VAL=y +CONFIG_MACH_CC9P9750DEV=y +CONFIG_MACH_CC9P9750VAL=y +CONFIG_MACH_CCW9C=y +CONFIG_MACH_INC20OTTER=y +CONFIG_MACH_OTTER=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set -# CONFIG_APM is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y +CONFIG_NET=y +CONFIG_PACKET=m +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_SYN_COOKIES=y +CONFIG_MTD=m +CONFIG_MTD_CONCAT=m +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_BLK_DEV_LOOP=m +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NS9XXX_ETH=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y +CONFIG_SERIAL_NS921X=y +CONFIG_SERIAL_NS921X_CONSOLE=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +CONFIG_ADC_NS9215=m +CONFIG_I2C=m +CONFIG_I2C_GPIO=m # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# # CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y +# CONFIG_HID_DEBUG is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_RTC_CLASS=m +CONFIG_RTC_DRV_NS9215=m +CONFIG_EXT2_FS=m CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set +CONFIG_JFFS2_FS=m +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_ICEDCC=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion5x_defconfig index 1e5aaa645fcd..52cd99bd52fb 100644 --- a/arch/arm/configs/orion_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -140,7 +140,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set -CONFIG_ARCH_ORION=y +CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 3c0c4f192dc1..95a22f512805 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -727,14 +727,14 @@ CONFIG_I2C_CHARDEV=m # # I2C Algorithms # -# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # -CONFIG_I2C_AT91=m +CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig new file mode 100644 index 000000000000..484dc9739dfc --- /dev/null +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -0,0 +1,1098 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Sun Oct 14 02:01:07 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +CONFIG_AUDIT=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_AT91SAM9260=y +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set + +# +# AT91SAM9260 Variants +# +# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set + +# +# AT91SAM9260 / AT91SAM9XE Board Type +# +# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_MACH_CAM60 is not set +CONFIG_MACH_SAM9_L9260=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +# CONFIG_ATMEL_TCLIB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=3 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +# CONFIG_MISC_DEVICES is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_DRV_DS1553=y +# CONFIG_RTC_DRV_STK17TA8 is not set +CONFIG_RTC_DRV_DS1742=y +CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T59 is not set +CONFIG_RTC_DRV_V3020=y + +# +# on-CPU RTC drivers +# + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig new file mode 100644 index 000000000000..576b8339f0d6 --- /dev/null +++ b/arch/arm/configs/tct_hammer_defconfig @@ -0,0 +1,886 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc7-hammer +# Thu Mar 27 16:39:48 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set +CONFIG_PLAT_S3C24XX=y +# CONFIG_S3C2410_DMA is not set +CONFIG_PLAT_S3C=y +CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y +CONFIG_CPU_LLSERIAL_S3C2410=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=0 + +# +# S3C2400 Machines +# +CONFIG_CPU_S3C2410=y +CONFIG_S3C2410_GPIO=y +CONFIG_S3C2410_CLOCK=y + +# +# S3C2410 Machines +# +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_H1940 is not set +# CONFIG_MACH_N30 is not set +# CONFIG_ARCH_BAST is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_AML_M5900 is not set +CONFIG_MACH_TCT_HAMMER=y +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_QT2410 is not set + +# +# S3C2412 Machines +# +# CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2412 is not set +# CONFIG_MACH_VSTMS is not set + +# +# S3C2440 Machines +# +# CONFIG_MACH_ANUBIS is not set +# CONFIG_MACH_OSIRIS is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_MACH_NEXCODER_2440 is not set + +# +# S3C2442 Machines +# + +# +# S3C2443 Machines +# +# CONFIG_MACH_SMDK2443 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=200 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +# CONFIG_INET is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=10240 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_S3C2410=y +CONFIG_SERIAL_S3C2410_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_SYSCTL is not set +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_S3C_PORT is not set +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig new file mode 100644 index 000000000000..26de37f74686 --- /dev/null +++ b/arch/arm/configs/yl9200_defconfig @@ -0,0 +1,1216 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Fri Jan 11 09:53:59 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91RM9200 Board Type +# +# CONFIG_MACH_ONEARM is not set +CONFIG_ARCH_AT91RM9200DK=y +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +CONFIG_MACH_YL9200=y + +# +# AT91 Board Options +# +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=3 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S1D135XX=y +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=y +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91RM9200=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=1 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_DEBUG_KOBJECT=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 00d44c6fbfe9..d5be3f7ac0e3 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o +obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 3278e713c32a..0a0d2479274b 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -58,6 +58,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); +#ifdef CONFIG_ARM_THUMBEE + DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); +#endif #ifdef CONFIG_IWMMXT DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt)); #endif @@ -108,5 +111,12 @@ int main(void) DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush)); DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags)); DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags)); + BLANK(); +#ifdef MULTI_DABORT + DEFINE(PROCESSOR_DABT_FUNC, offsetof(struct processor, _data_abort)); +#endif +#ifdef MULTI_PABORT + DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort)); +#endif return 0; } diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 283e14fff993..95f1c121cb30 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -359,9 +359,11 @@ CALL(sys_kexec_load) CALL(sys_utimensat) CALL(sys_signalfd) -/* 350 */ CALL(sys_ni_syscall) +/* 350 */ CALL(sys_timerfd_create) CALL(sys_eventfd) CALL(sys_fallocate) + CALL(sys_timerfd_settime) + CALL(sys_timerfd_gettime) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a46d5b456765..7dca225752c1 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -166,12 +166,12 @@ __dabt_svc: @ The abort handler must return the aborted address in r0, and @ the fault status register in r1. r9 must be preserved. @ -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT ldr r4, .LCprocfns mov lr, pc - ldr pc, [r4] + ldr pc, [r4, #PROCESSOR_DABT_FUNC] #else - bl CPU_ABORT_HANDLER + bl CPU_DABORT_HANDLER #endif @ @@ -209,14 +209,12 @@ __irq_svc: irq_handler #ifdef CONFIG_PREEMPT + str r8, [tsk, #TI_PREEMPT] @ restore preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags + teq r8, #0 @ if preempt count != 0 + movne r0, #0 @ force flags to 0 tst r0, #_TIF_NEED_RESCHED blne svc_preempt -preempt_return: - ldr r0, [tsk, #TI_PREEMPT] @ read preempt value - str r8, [tsk, #TI_PREEMPT] @ restore preempt count - teq r0, r7 - strne r0, [r0, -r0] @ bug() #endif ldr r0, [sp, #S_PSR] @ irqs are already disabled msr spsr_cxsf, r0 @@ -230,19 +228,11 @@ preempt_return: #ifdef CONFIG_PREEMPT svc_preempt: - teq r8, #0 @ was preempt count = 0 - ldreq r6, .LCirq_stat - movne pc, lr @ no - ldr r0, [r6, #4] @ local_irq_count - ldr r1, [r6, #8] @ local_bh_count - adds r0, r0, r1 - movne pc, lr - mov r7, #0 @ preempt_schedule_irq - str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0 + mov r8, lr 1: bl preempt_schedule_irq @ irq en/disable is done inside ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED - beq preempt_return @ go again + moveq pc, r8 @ go again b 1b #endif @@ -293,7 +283,6 @@ __pabt_svc: mrs r9, cpsr tst r3, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT - msr cpsr_c, r9 @ @ set args, then call main handler @@ -301,7 +290,15 @@ __pabt_svc: @ r0 - address of faulting instruction @ r1 - pointer to registers on stack @ - mov r0, r2 @ address (pc) +#ifdef MULTI_PABORT + mov r0, r2 @ pass address of aborted instruction. + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_PABT_FUNC] +#else + CPU_PABORT_HANDLER(r0, r2) +#endif + msr cpsr_c, r9 @ Maybe enable interrupts mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -320,16 +317,12 @@ __pabt_svc: .align 5 .LCcralign: .word cr_alignment -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT .LCprocfns: .word processor #endif .LCfp: .word fp_enter -#ifdef CONFIG_PREEMPT -.LCirq_stat: - .word irq_stat -#endif /* * User mode handlers @@ -404,12 +397,12 @@ __dabt_usr: @ The abort handler must return the aborted address in r0, and @ the fault status register in r1. @ -#ifdef MULTI_ABORT +#ifdef MULTI_DABORT ldr r4, .LCprocfns mov lr, pc - ldr pc, [r4] + ldr pc, [r4, #PROCESSOR_DABT_FUNC] #else - bl CPU_ABORT_HANDLER + bl CPU_DABORT_HANDLER #endif @ @@ -455,10 +448,6 @@ __irq_usr: __und_usr: usr_entry - tst r3, #PSR_T_BIT @ Thumb mode? - bne __und_usr_unknown @ ignore FP - sub r4, r2, #4 - @ @ fall through to the emulation code, which returns using r9 if @ it has emulated the instruction, or the more conventional lr @@ -468,7 +457,24 @@ __und_usr: @ adr r9, ret_from_exception adr lr, __und_usr_unknown -1: ldrt r0, [r4] + tst r3, #PSR_T_BIT @ Thumb mode? + subeq r4, r2, #4 @ ARM instr at LR - 4 + subne r4, r2, #2 @ Thumb instr at LR - 2 +1: ldreqt r0, [r4] + beq call_fpe + @ Thumb instruction +#if __LINUX_ARM_ARCH__ >= 7 +2: ldrht r5, [r4], #2 + and r0, r5, #0xf800 @ mask bits 111x x... .... .... + cmp r0, #0xe800 @ 32bit instruction if xx != 0 + blo __und_usr_unknown +3: ldrht r0, [r4] + add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 + orr r0, r0, r5, lsl #16 +#else + b __und_usr_unknown +#endif + @ @ fallthrough to call_fpe @ @@ -477,10 +483,14 @@ __und_usr: * The out of line fixup for the ldrt above. */ .section .fixup, "ax" -2: mov pc, r9 +4: mov pc, r9 .previous .section __ex_table,"a" - .long 1b, 2b + .long 1b, 4b +#if __LINUX_ARM_ARCH__ >= 7 + .long 2b, 4b + .long 3b, 4b +#endif .previous /* @@ -507,9 +517,16 @@ __und_usr: * r10 = this threads thread_info structure. * lr = unrecognised instruction return address */ + @ + @ Fall-through from Thumb-2 __und_usr + @ +#ifdef CONFIG_NEON + adr r6, .LCneon_thumb_opcodes + b 2f +#endif call_fpe: #ifdef CONFIG_NEON - adr r6, .LCneon_opcodes + adr r6, .LCneon_arm_opcodes 2: ldr r7, [r6], #4 @ mask value cmp r7, #0 @ end mask? @@ -526,6 +543,7 @@ call_fpe: 1: #endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 + tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) and r8, r0, #0x0f000000 @ mask out op-code bits teqne r8, #0x0f000000 @ SWI (ARM6/7 bug)? @@ -577,7 +595,7 @@ call_fpe: #ifdef CONFIG_NEON .align 6 -.LCneon_opcodes: +.LCneon_arm_opcodes: .word 0xfe000000 @ mask .word 0xf2000000 @ opcode @@ -586,6 +604,16 @@ call_fpe: .word 0x00000000 @ mask .word 0x00000000 @ opcode + +.LCneon_thumb_opcodes: + .word 0xef000000 @ mask + .word 0xef000000 @ opcode + + .word 0xff100000 @ mask + .word 0xf9000000 @ opcode + + .word 0x00000000 @ mask + .word 0x00000000 @ opcode #endif do_fpe: @@ -619,8 +647,15 @@ __und_usr_unknown: __pabt_usr: usr_entry +#ifdef MULTI_PABORT + mov r0, r2 @ pass address of aborted instruction. + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_PABT_FUNC] +#else + CPU_PABORT_HANDLER(r0, r2) +#endif enable_irq @ Enable interrupts - mov r0, r2 @ address (pc) mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler /* fall through */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 6c90c50a9ee3..597ed00a08d8 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -352,6 +352,11 @@ sys_mmap2: b do_mmap2 #endif +ENTRY(pabort_ifar) + mrc p15, 0, r0, cr6, cr0, 2 +ENTRY(pabort_noifar) + mov pc, lr + #ifdef CONFIG_OABI_COMPAT /* diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 50f667febe29..7e9c00a8a412 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -75,8 +75,13 @@ __error_p: #ifdef CONFIG_DEBUG_LL adr r0, str_p1 bl printascii + mov r0, r9 + bl printhex8 + adr r0, str_p2 + bl printascii b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" +str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" +str_p2: .asciz ").\n" .align #endif diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c new file mode 100644 index 000000000000..df3f6b7ebcea --- /dev/null +++ b/arch/arm/kernel/thumbee.c @@ -0,0 +1,81 @@ +/* + * arch/arm/kernel/thumbee.c + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/thread_notify.h> + +/* + * Access to the ThumbEE Handler Base register + */ +static inline unsigned long teehbr_read() +{ + unsigned long v; + asm("mrc p14, 6, %0, c1, c0, 0\n" : "=r" (v)); + return v; +} + +static inline void teehbr_write(unsigned long v) +{ + asm("mcr p14, 6, %0, c1, c0, 0\n" : : "r" (v)); +} + +static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = t; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + thread->thumbee_state = 0; + break; + case THREAD_NOTIFY_SWITCH: + current_thread_info()->thumbee_state = teehbr_read(); + teehbr_write(thread->thumbee_state); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block thumbee_notifier_block = { + .notifier_call = thumbee_notifier, +}; + +static int __init thumbee_init(void) +{ + unsigned long pfr0; + unsigned int cpu_arch = cpu_architecture(); + + if (cpu_arch < CPU_ARCH_ARMv7) + return 0; + + /* processor feature register 0 */ + asm("mrc p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0)); + if ((pfr0 & 0x0000f000) != 0x00001000) + return 0; + + printk(KERN_INFO "ThumbEE CPU extension supported.\n"); + elf_hwcap |= HWCAP_THUMBEE; + thread_register_notifier(&thumbee_notifier_block); + + return 0; +} + +late_initcall(thumbee_init); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 074dcd5d9a7e..0fc07b6db749 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -12,18 +12,28 @@ config ARCH_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9261 bool "AT91SAM9261" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9263 bool "AT91SAM9263" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91SAM9RL bool "AT91SAM9RL" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91CAP9 bool "AT91CAP9" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS config ARCH_AT91X40 bool "AT91x40" @@ -109,6 +119,13 @@ config MACH_KAFA help Select this if you are using Sperry-Sun's KAFA board. +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + depends on ARCH_AT91RM9200 + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + endif # ---------------------------------------------------------- @@ -133,6 +150,20 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + depends on ARCH_AT91SAM9260 + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + depends on ARCH_AT91SAM9260 + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + endif # ---------------------------------------------------------- @@ -216,7 +247,7 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91) help Enable support for the DataFlash card. diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index bf5f293dccf8..8d9bc0153b18 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -29,9 +29,12 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o +obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o +obj-$(CONFIG_MACH_CAM60) += board-cam60.o +obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 48d27d8000b0..933fa8f55cbc 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -13,12 +13,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91cap9.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -288,6 +290,12 @@ static void at91cap9_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91cap9_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + + /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -298,6 +306,7 @@ void __init at91cap9_initialize(unsigned long main_clock) iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); at91_arch_reset = at91cap9_reset; + pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index c50fad9cd143..f1a80d74a4b6 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -16,15 +16,15 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> +#include <linux/i2c-gpio.h> #include <video/atmel_lcdc.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91cap9.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -283,10 +283,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -344,6 +349,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) void __init at91_add_device_nand(struct at91_nand_data *data) {} #endif + /* -------------------------------------------------------------------- * TWI (i2c) * -------------------------------------------------------------------- */ @@ -532,13 +538,59 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91CAP9_BASE_TCB0, + .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_TCB, + .end = AT91CAP9_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has one clock and irq for all three TC channels */ + at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); + platform_device_register(&at91cap9_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + static struct platform_device at91cap9_rtt_device = { .name = "at91_rtt", - .id = -1, - .num_resources = 0, + .id = 0, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), }; static void __init at91_add_device_rtt(void) @@ -990,7 +1042,7 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) @@ -1031,8 +1083,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1043,6 +1093,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} @@ -1060,6 +1113,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index ef6aeb86e980..de19bee83f75 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -577,6 +577,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter blocks + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb0_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TCB0, + .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_TC0, + .end = AT91RM9200_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91RM9200_ID_TC1, + .end = AT91RM9200_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91RM9200_ID_TC2, + .end = AT91RM9200_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb0_resources, + .num_resources = ARRAY_SIZE(tcb0_resources), +}; + +static struct resource tcb1_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TCB1, + .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_TC3, + .end = AT91RM9200_ID_TC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91RM9200_ID_TC4, + .end = AT91RM9200_ID_TC4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91RM9200_ID_TC5, + .end = AT91RM9200_ID_TC5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = tcb1_resources, + .num_resources = ARRAY_SIZE(tcb1_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); + platform_device_register(&at91rm9200_tcb0_device); + + at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); + at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); + platform_device_register(&at91rm9200_tcb1_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -1019,7 +1103,7 @@ static inline void configure_usart3_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) @@ -1110,8 +1194,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1122,6 +1204,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} @@ -1141,6 +1226,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtc(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 18d06612ce8a..ee26550cdc21 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -18,6 +19,7 @@ #include <asm/arch/at91sam9260.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -267,6 +269,11 @@ static void at91sam9260_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9260_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization @@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsigned long main_clock) iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); at91_arch_reset = at91sam9260_reset; + pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 105f8403860b..393a32aefce5 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,8 +19,8 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -288,10 +288,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- + * Timer/Counter blocks + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb0_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_TCB0, + .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_TC0, + .end = AT91SAM9260_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9260_ID_TC1, + .end = AT91SAM9260_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9260_ID_TC2, + .end = AT91SAM9260_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb0_resources, + .num_resources = ARRAY_SIZE(tcb0_resources), +}; + +static struct resource tcb1_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_TCB1, + .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_TC3, + .end = AT91SAM9260_ID_TC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9260_ID_TC4, + .end = AT91SAM9260_ID_TC4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9260_ID_TC5, + .end = AT91SAM9260_ID_TC5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = tcb1_resources, + .num_resources = ARRAY_SIZE(tcb1_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); + platform_device_register(&at91sam9260_tcb0_device); + + at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); + at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); + platform_device_register(&at91sam9260_tcb1_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -553,7 +642,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -962,64 +1051,9 @@ static inline void configure_usart5_pins(void) at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91sam9260_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9260_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9260_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91sam9260_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); - break; - case 4: - configure_usart4_pins(); - at91_uarts[i] = &at91sam9260_uart4_device; - at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart"); - break; - case 5: - configure_usart5_pins(); - at91_uarts[i] = &at91sam9260_uart5_device; - at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart"); - break; - case 6: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9260_dbgu_device; - at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1073,8 +1107,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1085,9 +1117,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1103,6 +1137,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 90b87e1877d9..35bf6fd52516 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,12 +11,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -245,6 +247,11 @@ static void at91sam9261_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9261_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization @@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); at91_arch_reset = at91sam9261_reset; + pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 245641263fce..37cd547855b1 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,7 +24,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91sam9261_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_TCB0, + .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_TC0, + .end = AT91SAM9261_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9261_ID_TC1, + .end = AT91SAM9261_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9261_ID_TC2, + .end = AT91SAM9261_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); + platform_device_register(&at91sam9261_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -561,7 +610,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -938,49 +987,9 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9261_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(0); - at91_uarts[i] = &at91sam9261_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9261_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); - break; - case 3: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9261_dbgu_device; - at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1019,8 +1028,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1031,9 +1038,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1050,6 +1059,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index a53ba0f74351..052074a9f2d3 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,12 +11,14 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -271,6 +273,11 @@ static void at91sam9263_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9263_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization @@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsigned long main_clock) iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); at91_arch_reset = at91sam9263_reset; + pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 0b12e1adcc8e..b6454c525962 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -22,8 +22,8 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91sam9263.h> -#include <asm/arch/at91sam926x_mc.h> #include <asm/arch/at91sam9263_matrix.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -358,10 +358,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC0, + .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_TCB0, + .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_TCB, + .end = AT91SAM9263_ID_TCB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has one clock and irq for all three TC channels */ + at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); + platform_device_register(&at91sam9263_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ @@ -933,9 +975,6 @@ static inline void configure_ssc1_pins(unsigned pins) } /* - * Return the device node so that board init code can use it as the - * parent for the device node reflecting how it's used on this board. - * * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one @@ -1146,49 +1185,9 @@ static inline void configure_usart2_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9263_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); - break; - case 3: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9263_dbgu_device; - at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -1227,8 +1226,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -1239,9 +1236,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -1257,6 +1256,7 @@ static int __init at91_add_standard_devices(void) { at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index e38d23770992..5cecbd7de6a6 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -1,23 +1,20 @@ /* - * linux/arch/arm/mach-at91/at91sam926x_time.c + * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x * * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France + * Converted to ClockSource/ClockEvents by David Brownell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> +#include <linux/clk.h> +#include <linux/clockchips.h> -#include <asm/hardware.h> -#include <asm/io.h> #include <asm/mach/time.h> #include <asm/arch/at91_pit.h> @@ -26,85 +23,167 @@ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) +static u32 pit_cycle; /* write-once */ +static u32 pit_cnt; /* access only w/system irq blocked */ + + /* - * Returns number of microseconds since last timer interrupt. Note that interrupts - * will have been disabled by do_gettimeofday() - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. + * Clocksource: just a monotonic counter of MCK/16 cycles. + * We don't care whether or not PIT irqs are enabled. */ -static unsigned long at91sam926x_gettimeoffset(void) +static cycle_t read_pit_clk(void) { - unsigned long elapsed; - unsigned long t = at91_sys_read(AT91_PIT_PIIR); + unsigned long flags; + u32 elapsed; + u32 t; + + raw_local_irq_save(flags); + elapsed = pit_cnt; + t = at91_sys_read(AT91_PIT_PIIR); + raw_local_irq_restore(flags); + + elapsed += PIT_PICNT(t) * pit_cycle; + elapsed += PIT_CPIV(t); + return elapsed; +} + +static struct clocksource pit_clk = { + .name = "pit", + .rating = 175, + .read = read_pit_clk, + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; - elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ - return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH; +/* + * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) + */ +static void +pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* update clocksource counter, then enable the IRQ */ + raw_local_irq_save(flags); + pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN + | AT91_PIT_PITIEN); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_ONESHOT: + BUG(); + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* disable irq, leaving the clocksource active */ + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } } +static struct clock_event_device pit_clkevt = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 100, + .cpumask = CPU_MASK_CPU0, + .set_mode = pit_clkevt_mode, +}; + + /* * IRQ handler for the timer. */ -static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) +static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) { - volatile long nr_ticks; - if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ - /* Get number to ticks performed before interrupt and clear PIT interrupt */ + /* The PIT interrupt may be disabled, and is shared */ + if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) + && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) { + unsigned nr_ticks; + + /* Get number of ticks performed before irq, and ack it */ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); do { - timer_tick(); + pit_cnt += pit_cycle; + pit_clkevt.event_handler(&pit_clkevt); nr_ticks--; } while (nr_ticks); return IRQ_HANDLED; - } else - return IRQ_NONE; /* not handled */ + } + + return IRQ_NONE; } -static struct irqaction at91sam926x_timer_irq = { +static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_timer_interrupt + .handler = at91sam926x_pit_interrupt }; -void at91sam926x_timer_reset(void) +static void at91sam926x_pit_reset(void) { - /* Disable timer */ + /* Disable timer and irqs */ at91_sys_write(AT91_PIT_MR, 0); - /* Clear any pending interrupts */ - (void) at91_sys_read(AT91_PIT_PIVR); + /* Clear any pending interrupts, wait for PIT to stop counting */ + while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0) + cpu_relax(); - /* Set Period Interval timer and enable its interrupt */ - at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN); + /* Start PIT but don't enable IRQ */ + at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); } /* - * Set up timer interrupt. + * Set up both clocksource and clockevent support. */ -void __init at91sam926x_timer_init(void) +static void __init at91sam926x_pit_init(void) { - /* Initialize and enable the timer */ - at91sam926x_timer_reset(); + unsigned long pit_rate; + unsigned bits; + + /* + * Use our actual MCK to figure out how many MCK/16 ticks per + * 1/HZ period (instead of a compile-time constant LATCH). + */ + pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16; + pit_cycle = (pit_rate + HZ/2) / HZ; + WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); - /* Make IRQs happen for the system timer. */ - setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq); + /* Initialize and enable the timer */ + at91sam926x_pit_reset(); + + /* + * Register clocksource. The high order bits of PIV are unused, + * so this isn't a 32-bit counter unless we get clockevent irqs. + */ + pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift); + bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; + pit_clk.mask = CLOCKSOURCE_MASK(bits); + clocksource_register(&pit_clk); + + /* Set up irq handler */ + setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); + + /* Set up and register clockevents */ + pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); + clockevents_register_device(&pit_clkevt); } -#ifdef CONFIG_PM -static void at91sam926x_timer_suspend(void) +static void at91sam926x_pit_suspend(void) { /* Disable timer */ at91_sys_write(AT91_PIT_MR, 0); } -#else -#define at91sam926x_timer_suspend NULL -#endif struct sys_timer at91sam926x_timer = { - .init = at91sam926x_timer_init, - .offset = at91sam926x_gettimeoffset, - .suspend = at91sam926x_timer_suspend, - .resume = at91sam926x_timer_reset, + .init = at91sam926x_pit_init, + .suspend = at91sam926x_pit_suspend, + .resume = at91sam926x_pit_reset, }; - diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 4813a35f6cf5..902c79893ec7 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -17,6 +18,7 @@ #include <asm/arch/at91sam9rl.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> #include "generic.h" #include "clock.h" @@ -244,6 +246,11 @@ static void at91sam9rl_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } +static void at91sam9rl_poweroff(void) +{ + at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); +} + /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization @@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsigned long main_clock) iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); at91_arch_reset = at91sam9rl_reset; + pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Init clock subsystem */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f43b5c33e45d..dbb9a5fc2090 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,7 +20,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91sam9rl.h> #include <asm/arch/at91sam9rl_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" @@ -105,10 +105,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; @@ -385,6 +390,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- + * Timer/Counter block + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_ATMEL_TCLIB + +static struct resource tcb_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_TCB0, + .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_TC0, + .end = AT91SAM9RL_ID_TC0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AT91SAM9RL_ID_TC1, + .end = AT91SAM9RL_ID_TC1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = AT91SAM9RL_ID_TC2, + .end = AT91SAM9RL_ID_TC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_tcb_device = { + .name = "atmel_tcb", + .id = 0, + .resource = tcb_resources, + .num_resources = ARRAY_SIZE(tcb_resources), +}; + +static void __init at91_add_device_tc(void) +{ + /* this chip has a separate clock and irq for each TC channel */ + at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); + at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); + at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); + platform_device_register(&at91sam9rl_tcb_device); +} +#else +static void __init at91_add_device_tc(void) { } +#endif + + +/* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -418,7 +472,7 @@ static struct resource rtt_resources[] = { static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", - .id = -1, + .id = 0, .resource = rtt_resources, .num_resources = ARRAY_SIZE(rtt_resources), }; @@ -539,9 +593,6 @@ static inline void configure_ssc1_pins(unsigned pins) } /* - * Return the device node so that board init code can use it as the - * parent for the device node reflecting how it's used on this board. - * * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one @@ -802,54 +853,9 @@ static inline void configure_usart3_pins(unsigned pins) at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } -static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91sam9rl_uart0_device; - at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(0); - at91_uarts[i] = &at91sam9rl_uart1_device; - at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91sam9rl_uart2_device; - at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91sam9rl_uart3_device; - at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91sam9rl_dbgu_device; - at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; @@ -893,8 +899,6 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } void __init at91_add_device_serial(void) @@ -905,9 +909,11 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } + + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} @@ -925,6 +931,7 @@ static int __init at91_add_standard_devices(void) at91_add_device_rtc(); at91_add_device_rtt(); at91_add_device_watchdog(); + at91_add_device_tc(); return 0; } diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c new file mode 100644 index 000000000000..b22a1a004055 --- /dev/null +++ b/arch/arm/mach-at91/board-cam60.c @@ -0,0 +1,180 @@ +/* + * KwikByte CAM60 (KB9260) + * + * based on board-sam9260ek.c + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init cam60_map_io(void) +{ + /* Initialize processor: 10 MHz crystal */ + at91sam9260_initialize(10000000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init cam60_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host + */ +static struct at91_usbh_data __initdata cam60_usbh_data = { + .ports = 1, +}; + + +/* + * SPI devices. + */ +#if defined(CONFIG_MTD_DATAFLASH) +static struct mtd_partition __initdata cam60_spi_partitions[] = { + { + .name = "BOOT1", + .offset = 0, + .size = 4 * 1056, + }, + { + .name = "BOOT2", + .offset = MTDPART_OFS_NXTBLK, + .size = 256 * 1056, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 2222 * 1056, + }, + { + .name = "file system", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data __initdata cam60_spi_flash_platform_data = { + .name = "spi_flash", + .parts = cam60_spi_partitions, + .nr_parts = ARRAY_SIZE(cam60_spi_partitions) +}; +#endif + +static struct spi_board_info cam60_spi_devices[] = { +#if defined(CONFIG_MTD_DATAFLASH) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + .platform_data = &cam60_spi_flash_platform_data + }, +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct __initdata at91_eth_data cam60_macb_data = { + .phy_irq_pin = AT91_PIN_PB5, + .is_rmii = 0, +}; + + +/* + * NAND Flash + */ +static struct mtd_partition __initdata cam60_nand_partition[] = { + { + .name = "nand_fs", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(cam60_nand_partition); + return cam60_nand_partition; +} + +static struct at91_nand_data __initdata cam60_nand_data = { + .ale = 21, + .cle = 22, + // .det_pin = ... not there + .rdy_pin = AT91_PIN_PA9, + .enable_pin = AT91_PIN_PA7, + .partition_info = nand_partitions, +}; + + +static void __init cam60_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* SPI */ + at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); + /* Ethernet */ + at91_add_device_eth(&cam60_macb_data); + /* USB Host */ + /* enable USB power supply circuit */ + at91_set_gpio_output(AT91_PIN_PB18, 1); + at91_add_device_usbh(&cam60_usbh_data); + /* NAND */ + at91_add_device_nand(&cam60_nand_data); +} + +MACHINE_START(CAM60, "KwikByte CAM60") + /* Maintainer: KwikByte */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cam60_map_io, + .init_irq = cam60_init_irq, + .init_machine = cam60_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 185437131541..e5512d1ff217 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -45,7 +45,7 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include <asm/arch/at91cap9_matrix.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 0e2a11fc5bbd..26fea4dcc3a0 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,17 +43,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata csb337_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init csb337_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ @@ -62,8 +51,11 @@ static void __init csb337_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); - /* Setup the serial ports and console */ - at91_init_serial(&csb337_uart_config); + /* DBGU on ttyS0 */ + at91_register_uart(0, 0, 0); + + /* make console=ttyS0 the default */ + at91_set_serial_console(0); } static void __init csb337_init_irq(void) diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index c5c721d27f42..419fd19b620b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,27 +40,16 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata csb637_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init csb637_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + /* DBGU on ttyS0 */ + at91_register_uart(0, 0, 0); - /* Setup the serial ports and console */ - at91_init_serial(&csb637_uart_config); + /* make console=ttyS0 the default */ + at91_set_serial_console(0); } static void __init csb637_init_irq(void) @@ -118,8 +107,19 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +static struct gpio_led csb_leds[] = { + { /* "d1", red */ + .name = "d1", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + static void __init csb637_board_init(void) { + /* LED(s) */ + at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); /* Serial */ at91_add_device_serial(); /* Ethernet */ diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c new file mode 100644 index 000000000000..e77fad443835 --- /dev/null +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -0,0 +1,178 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ecbat91.c + * Copyright (C) 2007 emQbit.com. + * + * We started from board-dk.c, which is Copyright (C) 2005 SAN People. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init ecb_at91map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx & Tx only) */ + at91_register_uart(AT91RM9200_ID_US0, 1, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ecb_at91init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata ecb_at91eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata ecb_at91usbh_data = { + .ports = 1, +}; + +static struct at91_mmc_data __initdata ecb_at91mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; + + +#if defined(CONFIG_MTD_DATAFLASH) +static struct mtd_partition __initdata my_flash0_partitions[] = +{ + { /* 0x8400 */ + .name = "Darrell-loader", + .offset = 0, + .size = 12* 1056, + }, + { + .name = "U-boot", + .offset = MTDPART_OFS_NXTBLK, + .size = 110 * 1056, + }, + { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ + .name = "UBoot-env", + .offset = MTDPART_OFS_NXTBLK, + .size = 8 * 1056, + }, + { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */ + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 1534 * 1056, + }, + { /* 190200 - jffs2 root filesystem */ + .name = "Filesystem", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, /* 26 sectors */ + } +}; + +static struct flash_platform_data __initdata my_flash0_platform = { + .name = "Removable flash card", + .parts = my_flash0_partitions, + .nr_parts = ARRAY_SIZE(my_flash0_partitions) +}; + +#endif + +static struct spi_board_info __initdata ecb_at91spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, +#if defined(CONFIG_MTD_DATAFLASH) + .platform_data = &my_flash0_platform, +#endif + }, + { /* User accessable spi - cs1 (250KHz) */ + .modalias = "spi-cs1", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* User accessable spi - cs2 (1MHz) */ + .modalias = "spi-cs2", + .chip_select = 2, + .max_speed_hz = 1 * 1000 * 1000, + }, + { /* User accessable spi - cs3 (10MHz) */ + .modalias = "spi-cs3", + .chip_select = 3, + .max_speed_hz = 10 * 1000 * 1000, + }, +}; + +static void __init ecb_at91board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + + /* Ethernet */ + at91_add_device_eth(&ecb_at91eth_data); + + /* USB Host */ + at91_add_device_usbh(&ecb_at91usbh_data); + + /* I2C */ + at91_add_device_i2c(NULL, 0); + + /* MMC */ + at91_add_device_mmc(0, &ecb_at91mmc_data); + + /* SPI */ + at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); +} + +MACHINE_START(ECBAT91, "emQbit's ECB_AT91") + /* Maintainer: emQbit.com */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = ecb_at91map_io, + .init_irq = ecb_at91init_irq, + .init_machine = ecb_at91board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c new file mode 100644 index 000000000000..8f76af5e219a --- /dev/null +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-at91/board-sam9-l9260.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * Copyright (C) 2007 Olimex Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + +#include "generic.h" + + +static void __init ek_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init ek_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata ek_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata ek_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * SPI devices. + */ +static struct spi_board_info ek_spi_devices[] = { +#if !defined(CONFIG_MMC_AT91) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, + .is_rmii = 0, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata ek_nand_partition[] = { + { + .name = "Bootloader Area", + .offset = 0, + .size = 10 * 1024 * 1024, + }, + { + .name = "User Area", + .offset = 10 * 1024 * 1024, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(ek_nand_partition); + return ek_nand_partition; +} + +static struct at91_nand_data __initdata ek_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, + .det_pin = AT91_PIN_PC8, + .wp_pin = AT91_PIN_PC4, +// .vcc_pin = ... not connected +}; + +static void __init ek_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&ek_usbh_data); + /* USB Device */ + at91_add_device_udc(&ek_udc_data); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* NAND */ + at91_add_device_nand(&ek_nand_data); + /* Ethernet */ + at91_add_device_eth(&ek_macb_data); + /* MMC */ + at91_add_device_mmc(0, &ek_mmc_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); +} + +MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") + /* Maintainer: Olimex */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = ek_map_io, + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index b343a6c28120..4d1d9c777084 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -25,6 +25,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/spi/at73c213.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -37,29 +39,28 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 5 = USART0 .. USART5 - * 6 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -85,6 +86,35 @@ static struct at91_udc_data __initdata ek_udc_data = { /* + * Audio + */ +static struct at73c213_board_info at73c213_data = { + .ssc_id = 0, + .shortname = "AT91SAM9260-EK external DAC", +}; + +#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) +static void __init at73c213_set_clk(struct at73c213_board_info *info) +{ + struct clk *pck0; + struct clk *plla; + + pck0 = clk_get(NULL, "pck0"); + plla = clk_get(NULL, "plla"); + + /* AT73C213 MCK Clock */ + at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */ + + clk_set_parent(pck0, plla); + clk_put(plla); + + info->dac_clk = pck0; +} +#else +static void __init at73c213_set_clk(struct at73c213_board_info *info) {} +#endif + +/* * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { @@ -110,6 +140,8 @@ static struct spi_board_info ek_spi_devices[] = { .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 1, + .mode = SPI_MODE_1, + .platform_data = &at73c213_data, }, #endif }; @@ -172,6 +204,24 @@ static struct at91_mmc_data __initdata ek_mmc_data = { // .vcc_pin = ... not connected }; + +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* "bottom" led, green, userled1 to be defined */ + .name = "ds5", + .gpio = AT91_PIN_PA6, + .active_low = 1, + .default_trigger = "none", + }, + { /* "power" led, yellow */ + .name = "ds1", + .gpio = AT91_PIN_PA9, + .default_trigger = "heartbeat", + } +}; + static void __init ek_board_init(void) { /* Serial */ @@ -190,6 +240,11 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ at91_add_device_i2c(NULL, 0); + /* SSC (to AT73C213) */ + at73c213_set_clk(&at73c213_data); + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 0ce38dfa6ebe..08382c0df221 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -26,6 +26,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/spi/at73c213.h> +#include <linux/clk.h> #include <linux/dm9000.h> #include <linux/fb.h> #include <linux/gpio_keys.h> @@ -44,22 +46,11 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 2 = USART0 .. USART2 - * 3 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 1, - .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -68,8 +59,11 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -239,6 +233,35 @@ static void __init ek_add_device_ts(void) {} #endif /* + * Audio + */ +static struct at73c213_board_info at73c213_data = { + .ssc_id = 1, + .shortname = "AT91SAM9261-EK external DAC", +}; + +#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) +static void __init at73c213_set_clk(struct at73c213_board_info *info) +{ + struct clk *pck2; + struct clk *plla; + + pck2 = clk_get(NULL, "pck2"); + plla = clk_get(NULL, "plla"); + + /* AT73C213 MCK Clock */ + at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ + + clk_set_parent(pck2, plla); + clk_put(plla); + + info->dac_clk = pck2; +} +#else +static void __init at73c213_set_clk(struct at73c213_board_info *info) {} +#endif + +/* * SPI devices */ static struct spi_board_info ek_spi_devices[] = { @@ -256,6 +279,7 @@ static struct spi_board_info ek_spi_devices[] = { .bus_num = 0, .platform_data = &ads_info, .irq = AT91SAM9261_ID_IRQ0, + .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) @@ -271,6 +295,9 @@ static struct spi_board_info ek_spi_devices[] = { .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, + .mode = SPI_MODE_1, + .platform_data = &at73c213_data, + .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ }, #endif }; @@ -460,6 +487,29 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* "bottom" led, green, userled1 to be defined */ + .name = "ds7", + .gpio = AT91_PIN_PA14, + .active_low = 1, + .default_trigger = "none", + }, + { /* "top" led, green, userled2 to be defined */ + .name = "ds8", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "none", + }, + { /* "power" led, yellow */ + .name = "ds1", + .gpio = AT91_PIN_PA23, + .default_trigger = "heartbeat", + } +}; + static void __init ek_board_init(void) { /* Serial */ @@ -481,6 +531,9 @@ static void __init ek_board_init(void) at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* Touchscreen */ ek_add_device_ts(); + /* SSC (to AT73C213) */ + at73c213_set_clk(&at73c213_data); + at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); #else /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); @@ -489,6 +542,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Push Buttons */ ek_add_device_buttons(); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bf103b24c937..b4cd5d0ed597 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -43,29 +43,24 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 2 = USART0 .. USART2 - * 3 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) @@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = { .name = "ds3", .gpio = AT91_PIN_PB7, .default_trigger = "heartbeat", - }, + } }; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bc0546d7245f..ffc0597aee8d 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -29,29 +29,24 @@ #include <asm/arch/board.h> #include <asm/arch/gpio.h> -#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91sam9_smc.h> #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata ek_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init ek_map_io(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); - /* Setup the serial ports and console */ - at91_init_serial(&ek_uart_config); + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init ek_init_irq(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c new file mode 100755 index 000000000000..b5717108991d --- /dev/null +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -0,0 +1,683 @@ +/* + * linux/arch/arm/mach-at91/board-yl-9200.c + * + * Adapted from: + *various board files in + * /arch/arm/mach-at91 + * modifications to convert to YL-9200 platform + * Copyright (C) 2007 S.Birtles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +/*#include <linux/can_bus/candata.h>*/ +#include <linux/spi/ads7846.h> +#include <linux/mtd/physmap.h> + +/*#include <sound/gpio_sounder.h>*/ +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91rm9200_mc.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> + +#include "generic.h" +#include <asm/arch/at91_pio.h> + +#define YL_9200_FLASH_BASE AT91_CHIPSELECT_0 +#define YL_9200_FLASH_SIZE 0x800000 + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL + *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL + *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL + *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL + *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL + * on the YL-9200 we are sitting at the following + *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL + *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL + */ + +/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/ + +static struct at91_uart_config __initdata yl_9200_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 3, + .tty_map = { 4, 1, 0, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init yl_9200_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + /*Also initialises register clocks & gpio*/ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/ + + /* Setup the serial ports and console */ + at91_init_serial(&yl_9200_uart_config); + + /* Setup the LEDs D2=PB17,D3=PB16 */ + at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/ +} + +static void __init yl_9200_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata yl_9200_eth_data = { + .phy_irq_pin = AT91_PIN_PB28, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata yl_9200_usbh_data = { + .ports = 1, /* this should be 1 not 2 for the Yl9200*/ +}; + +static struct at91_udc_data __initdata yl_9200_udc_data = { +/*on sheet 7 Schemitic rev 1.0*/ + .pullup_pin = AT91_PIN_PC4, + .vbus_pin= AT91_PIN_PC5, + .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/ + +}; +/* +static struct at91_cf_data __initdata yl_9200_cf_data = { +TODO S.BIRTLES + .det_pin = AT91_PIN_xxx, + .rst_pin = AT91_PIN_xxx, + .irq_pin = ... not connected + .vcc_pin = ... always powered + +}; +*/ +static struct at91_mmc_data __initdata yl_9200_mmc_data = { + .det_pin = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/ +/* .wp_pin = ... not connected SHEET7*/ + .slot_b = 0, + .wire4 = 1, + +}; + +/* -------------------------------------------------------------------- + * Touch screen + * -------------------------------------------------------------------- */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ +} + +static void __init at91_init_device_ts(void) +{ +/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C +THAT IS TO SAY THAT MISO,MOSI,SPCK AND CS are already configured +we only need to enable the other datapins which are: +PB10/RK1 BUSY +*/ +/* Touchscreen BUSY signal , pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/ +at91_set_gpio_input(AT91_PIN_PB10, 1); +} + +#else +static void __init at91_init_device_ts(void) {} +#endif + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, +/* for a 8" touch screen*/ + //.x_plate_ohms = 603, //= 450, S.Birtles TODO + //.y_plate_ohms = 332, //= 250, S.Birtles TODO +/*for a 10.4" touch screen*/ + //.x_plate_ohms =611, + //.y_plate_ohms =325, + + .x_plate_ohms = 576, + .y_plate_ohms = 366, + // + .pressure_max = 15000, /*generally nonsense on the 7843*/ + /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/ + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; + +/*static struct canbus_platform_data can_info = { + .model = 2510, +}; +*/ + +static struct spi_board_info yl_9200_spi_devices[] = { +/*this sticks it at: + /sys/devices/platform/atmel_spi.0/spi0.0 + /sys/bus/platform/devices/ +Documentation/spi IIRC*/ + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + /*(this IS correct 04-NOV-2007)*/ + { + .modalias = "ads7846", /* because the driver is called ads7846*/ + .chip_select = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ +/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/ + /*.controller_data =AT91_PIN_PA3 ,*/ + .max_speed_hz = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91_PIN_PB11, + }, +#endif +/*we need to put our CAN driver data here!!*/ +/*THIS IS ALL DUMMY DATA*/ +/* { + .modalias = "mcp2510", //DUMMY for MCP2510 chip + .chip_select = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ + /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */ + /* .controller_data =AT91_PIN_PA4 , + .max_speed_hz = 25000 * 26, + .bus_num = 0, + .platform_data = &can_info, + .irq = AT91_PIN_PC0, + }, + */ + //max SPI chip needs to go here +}; + +static struct mtd_partition __initdata yl_9200_nand_partition[] = { + { + .name = "AT91 NAND partition 1, boot", + .offset = 0, + .size = 1 * SZ_256K + }, + { + .name = "AT91 NAND partition 2, kernel", + .offset = 1 * SZ_256K, + .size = 2 * SZ_1M - 1 * SZ_256K + }, + { + .name = "AT91 NAND partition 3, filesystem", + .offset = 2 * SZ_1M, + .size = 14 * SZ_1M + }, + { + .name = "AT91 NAND partition 4, storage", + .offset = 16 * SZ_1M, + .size = 16 * SZ_1M + }, + { + .name = "AT91 NAND partition 5, ext-fs", + .offset = 32 * SZ_1M, + .size = 32 * SZ_1M + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(yl_9200_nand_partition); + return yl_9200_nand_partition; +} + +static struct at91_nand_data __initdata yl_9200_nand_data = { + .ale= 6, + .cle= 7, + /*.det_pin = AT91_PIN_PCxx,*/ /*we don't have a det pin because NandFlash is fixed to board*/ + .rdy_pin = AT91_PIN_PC14, /*R/!B Sheet10*/ + .enable_pin = AT91_PIN_PC15, /*!CE Sheet10 */ + .partition_info = nand_partitions, +}; + + + +/* +TODO S.Birtles +potentially a problem with the size above +physmap platform flash device: 00800000 at 10000000 +physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank +NOR chip too large to fit in mapping. Attempting to cope... + Intel/Sharp Extended Query Table at 0x0031 +Using buffer write method +cfi_cmdset_0001: Erase suspend on write enabled +Reducing visibility of 16384KiB chip to 8192KiB +*/ + +static struct mtd_partition yl_9200_flash_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x001C0000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00200000 + } + +}; + +static struct physmap_flash_data yl_9200_flash_data = { + .width = 2, + .parts = yl_9200_flash_partitions, + .nr_parts = ARRAY_SIZE(yl_9200_flash_partitions), +}; + +static struct resource yl_9200_flash_resources[] = { +{ + .start = YL_9200_FLASH_BASE, + .end = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device yl_9200_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &yl_9200_flash_data, + }, + .resource = yl_9200_flash_resources, + .num_resources = ARRAY_SIZE(yl_9200_flash_resources), +}; + + +static struct gpio_led yl_9200_leds[] = { +/*D2 &D3 are passed directly in via at91_init_leds*/ + { + .name = "led4", /*D4*/ + .gpio = AT91_PIN_PB15, + .active_low = 1, + .default_trigger = "heartbeat", + /*.default_trigger = "timer",*/ + }, + { + .name = "led5", /*D5*/ + .gpio = AT91_PIN_PB8, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + +//static struct gpio_sounder yl_9200_sounder[] = {*/ +/*This is a simple speaker attached to a gpo line*/ + +// { +// .name = "Speaker", /*LS1*/ +// .gpio = AT91_PIN_PA22, +// .active_low = 0, +// .default_trigger = "heartbeat", + /*.default_trigger = "timer",*/ +// }, +//}; + + + +static struct i2c_board_info __initdata yl_9200_i2c_devices[] = { + { + /*TODO*/ + I2C_BOARD_INFO("CS4334", 0x00), + } +}; + + + /* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button yl_9200_buttons[] = { + { + .gpio = AT91_PIN_PA24, + .code = BTN_2, + .desc = "SW2", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB1, + .code = BTN_3, + .desc = "SW3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB2, + .code = BTN_4, + .desc = "SW4", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB6, + .code = BTN_5, + .desc = "SW5", + .active_low = 1, + .wakeup = 1, + }, + +}; + +static struct gpio_keys_platform_data yl_9200_button_data = { + .buttons = yl_9200_buttons, + .nbuttons = ARRAY_SIZE(yl_9200_buttons), +}; + +static struct platform_device yl_9200_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &yl_9200_button_data, + } +}; + +static void __init yl_9200_add_device_buttons(void) +{ + //SW2 + at91_set_gpio_input(AT91_PIN_PA24, 0); + at91_set_deglitch(AT91_PIN_PA24, 1); + + //SW3 + at91_set_gpio_input(AT91_PIN_PB1, 0); + at91_set_deglitch(AT91_PIN_PB1, 1); + //SW4 + at91_set_gpio_input(AT91_PIN_PB2, 0); + at91_set_deglitch(AT91_PIN_PB2, 1); + + //SW5 + at91_set_gpio_input(AT91_PIN_PB6, 0); + at91_set_deglitch(AT91_PIN_PB6, 1); + + + at91_set_gpio_output(AT91_PIN_PB7, 1); /* #TURN BUTTONS ON, SHEET 5 of schematics */ + platform_device_register(&yl_9200_button_device); +} +#else +static void __init yl_9200_add_device_buttons(void) {} +#endif + +#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#include <video/s1d13xxxfb.h> + +/* EPSON S1D13806 FB (discontinued chip)*/ +/* EPSON S1D13506 FB */ + +#define AT91_FB_REG_BASE 0x80000000L +#define AT91_FB_REG_SIZE 0x200 +#define AT91_FB_VMEM_BASE 0x80200000L +#define AT91_FB_VMEM_SIZE 0x200000L + +/*#define S1D_DISPLAY_WIDTH 640*/ +/*#define S1D_DISPLAY_HEIGHT 480*/ + + +static void __init yl_9200_init_video(void) +{ + at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6); + at91_sys_write(AT91_PIOC + PIO_BSR,0); + at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6); + + at91_sys_write( AT91_SMC_CSR(2), + AT91_SMC_NWS_(0x4) | + AT91_SMC_WSEN | + AT91_SMC_TDF_(0x100) | + AT91_SMC_DBW + ); + + + +} + + +static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] = +{ + {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/ + {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ + {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/ + {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/ + {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/ + {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/ + {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/ + {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/ + {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/ + {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/ + {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/ + {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/ + {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/ + {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/ + {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/ + {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/ + {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/ + {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/ + {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/ + {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/ + {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/ + {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/ + {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/ + {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/ + {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/ + {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/ + {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/ + {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/ + {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/ + {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/ + {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/ + {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/ + {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/ + {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/ + {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/ + {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/ + {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/ + {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/ + {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/ + {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/ + {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/ + {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/ + {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/ + {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */ + {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/ + {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/ + {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/ + {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/ + {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/ + {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/ + {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/ + {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/ + {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/ + {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/ + {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/ + {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/ + {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/ + {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/ + {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/ + {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/ + {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/ + {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/ + {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/ + {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/ + {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/ + {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/ + {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/ + {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/ + {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/ + {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/ + {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/ + {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/ + {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/ + {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/ + {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/ + {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/ + {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/ + {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/ + {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/ + {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/ + {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/ + {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/ + {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/ + {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/ + {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/ + {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/ + {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/ + {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/ + {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/ + {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/ + {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/ + {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/ + {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/ + {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/ + {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/ + {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/ + {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/ + {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/ + {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/ + {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/ + {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/ + {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/ + {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/ + {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/ + {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/ +}; + +static u64 s1dfb_dmamask = 0xffffffffUL; + +static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = { + .initregs = yl_9200_s1dfb_initregs, + .initregssize = ARRAY_SIZE(yl_9200_s1dfb_initregs), + .platform_init_video = yl_9200_init_video, +}; + +static struct resource yl_9200_s1dfb_resource[] = { + [0] = { /* video mem */ + .name = "s1d13xxxfb memory", + /* .name = "s1d13806 memory",*/ + .start = AT91_FB_VMEM_BASE, + .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* video registers */ + .name = "s1d13xxxfb registers", + /* .name = "s1d13806 registers",*/ + .start = AT91_FB_REG_BASE, + .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device yl_9200_s1dfb_device = { + /*TODO S.Birtles , really we need the chip revision in here as well*/ + .name = "s1d13806fb", + /* .name = "s1d13506fb",*/ + .id = -1, + .dev = { + /*TODO theres a waring here!!*/ + /*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/ + .dma_mask = &s1dfb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &yl_9200_s1dfb_pdata, + }, + .resource = yl_9200_s1dfb_resource, + .num_resources = ARRAY_SIZE(yl_9200_s1dfb_resource), +}; + +void __init yl_9200_add_device_video(void) +{ + platform_device_register(&yl_9200_s1dfb_device); +} +#else + void __init yl_9200_add_device_video(void) {} +#endif + +/*this is not called first , yl_9200_map_io is called first*/ +static void __init yl_9200_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&yl_9200_eth_data); + /* USB Host */ + at91_add_device_usbh(&yl_9200_usbh_data); + /* USB Device */ + at91_add_device_udc(&yl_9200_udc_data); + /* pullup_pin it is actually active low, but this is not needed, driver sets it up */ + /*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/ + + /* Compact Flash */ + /*at91_add_device_cf(&yl_9200_cf_data);*/ + + /* I2C */ + at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices)); + /* SPI */ + /*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/ + /* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the max 485 NOT SPI*/ + + /*touch screen and CAN*/ + at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices)); + + /*Basically the TS uses PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/ + /* we need this incase the board is running without a touch screen*/ + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + at91_init_device_ts(); /*init the touch screen device*/ + #endif + /* DataFlash card */ + at91_add_device_mmc(0, &yl_9200_mmc_data); + /* NAND */ + at91_add_device_nand(&yl_9200_nand_data); + /* NOR Flash */ + platform_device_register(&yl_9200_flash); + /* LEDs. Note!! this does not include the led's we passed for the processor status */ + at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds)); + /* VGA */ + /*this is self registered by including the s1d13xxx chip in the kernel build*/ + yl_9200_add_device_video(); + /* Push Buttons */ + yl_9200_add_device_buttons(); + /*TODO fixup the Sounder */ +// yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder)); + +} + +MACHINE_START(YL9200, "uCdragon YL-9200") + /* Maintainer: S.Birtles*/ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = yl_9200_map_io, + .init_irq = yl_9200_init_irq, + .init_machine = yl_9200_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index a67defd50438..39733b6992aa 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -26,12 +26,135 @@ #include <asm/mach-types.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91rm9200_mc.h> #include <asm/arch/gpio.h> #include <asm/arch/cpu.h> #include "generic.h" +#ifdef CONFIG_ARCH_AT91RM9200 +#include <asm/arch/at91rm9200_mc.h> + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + */ +#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1) +#define sdram_selfrefresh_disable() do {} while (0) + +#elif defined(CONFIG_ARCH_AT91CAP9) +#include <asm/arch/at91cap9_ddrsdr.h> + +static u32 saved_lpr; + +static inline void sdram_selfrefresh_enable(void) +{ + u32 lpr; + + saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + + lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; + at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); +} + +#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) + +#else +#include <asm/arch/at91sam9_sdramc.h> + +static u32 saved_lpr; + +static inline void sdram_selfrefresh_enable(void) +{ + u32 lpr; + + saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + lpr = saved_lpr & ~AT91_SDRAMC_LPCB; + at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); +} + +#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +/* + * FIXME: The AT91SAM9263 has a second EBI controller which may have + * additional SDRAM. pm_slowclock.S will require a similar fix. + */ + +#endif + + +/* + * Show the reason for the previous system reset. + */ +#if defined(AT91_SHDWC) + +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_shdwc.h> + +static void __init show_reset_status(void) +{ + static char reset[] __initdata = "reset"; + + static char general[] __initdata = "general"; + static char wakeup[] __initdata = "wakeup"; + static char watchdog[] __initdata = "watchdog"; + static char software[] __initdata = "software"; + static char user[] __initdata = "user"; + static char unknown[] __initdata = "unknown"; + + static char signal[] __initdata = "signal"; + static char rtc[] __initdata = "rtc"; + static char rtt[] __initdata = "rtt"; + static char restore[] __initdata = "power-restored"; + + char *reason, *r2 = reset; + u32 reset_type, wake_type; + + reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + wake_type = at91_sys_read(AT91_SHDW_SR); + + switch (reset_type) { + case AT91_RSTC_RSTTYP_GENERAL: + reason = general; + break; + case AT91_RSTC_RSTTYP_WAKEUP: + /* board-specific code enabled the wakeup sources */ + reason = wakeup; + + /* "wakeup signal" */ + if (wake_type & AT91_SHDW_WAKEUP0) + r2 = signal; + else { + r2 = reason; + if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ + reason = rtt; + else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ + reason = rtc; + else if (wake_type == 0) /* power-restored wakeup */ + reason = restore; + else /* unknown wakeup */ + reason = unknown; + } + break; + case AT91_RSTC_RSTTYP_WATCHDOG: + reason = watchdog; + break; + case AT91_RSTC_RSTTYP_SOFTWARE: + reason = software; + break; + case AT91_RSTC_RSTTYP_USER: + reason = user; + break; + default: + reason = unknown; + break; + } + pr_info("AT91: Starting after %s %s\n", reason, r2); +} +#else +static void __init show_reset_status(void) {} +#endif + static int at91_pm_valid_state(suspend_state_t state) { @@ -125,6 +248,11 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock); static void (*slow_clock)(void); +#ifdef CONFIG_AT91_SLOW_CLOCK +extern void at91_slow_clock(void); +extern u32 at91_slow_clock_sz; +#endif + static int at91_pm_enter(suspend_state_t state) { @@ -158,11 +286,14 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { +#ifdef CONFIG_AT91_SLOW_CLOCK + /* copy slow_clock handler to SRAM, and call it */ + memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); +#endif slow_clock(); break; } else { - /* DEVELOPMENT ONLY */ - pr_info("AT91: PM - no slow clock mode yet ...\n"); + pr_info("AT91: PM - no slow clock mode enabled ...\n"); /* FALLTHROUGH leaving master clock alone */ } @@ -175,13 +306,15 @@ static int at91_pm_enter(suspend_state_t state) case PM_SUSPEND_STANDBY: /* * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so the SDRAM stays in self-refresh mode until - * the wakeup IRQ occurs. + * in icache so no SDRAM accesses are needed until the + * wakeup IRQ occurs and self-refresh is terminated. */ asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ - /* fall though to next state */ + sdram_selfrefresh_enable(); + asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ + sdram_selfrefresh_disable(); + break; case PM_SUSPEND_ON: asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ @@ -196,6 +329,7 @@ static int at91_pm_enter(suspend_state_t state) at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: + sdram_selfrefresh_disable(); target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); @@ -220,21 +354,20 @@ static struct platform_suspend_ops at91_pm_ops ={ static int __init at91_pm_init(void) { - printk("AT91: Power Management\n"); - -#ifdef CONFIG_AT91_PM_SLOW_CLOCK - /* REVISIT allocations of SRAM should be dynamically managed. - * FIQ handlers and other components will want SRAM/TCM too... - */ - slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); - memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); +#ifdef CONFIG_AT91_SLOW_CLOCK + slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz); #endif - /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ + pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); + +#ifdef CONFIG_ARCH_AT91RM9200 + /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ at91_sys_write(AT91_SDRAMC_LPR, 0); +#endif suspend_set_ops(&at91_pm_ops); + show_reset_status(); return 0; } arch_initcall(at91_pm_init); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0e2b641268ad..dbaae5f746a1 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -31,6 +31,8 @@ config ARCH_EDB7211 bool "EDB7211" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0ecf99761feb..c1252ca9648e 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o clock.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 91f6a07a51d5..8bc187240542 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -159,7 +159,7 @@ static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; -static void update_gpio_int_params(unsigned port) +void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); @@ -175,98 +175,10 @@ static void update_gpio_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -/* Port ordering is: A B F D E C G H */ -static const u8 data_register_offset[8] = { - 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, -}; - -static const u8 data_direction_register_offset[8] = { - 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, -}; - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -static void ep93xx_gpio_set_direction(unsigned line, int direction) -{ - unsigned int data_direction_register; - unsigned long flags; - unsigned char v; - - data_direction_register = - EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]); - - local_irq_save(flags); - if (direction == GPIO_OUT) { - if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Port A/B/F */ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); - update_gpio_int_params(line >> 3); - } - - v = __raw_readb(data_direction_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_direction_register); - } else if (direction == GPIO_IN) { - v = __raw_readb(data_direction_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_direction_register); - } - local_irq_restore(flags); -} - -int gpio_direction_input(unsigned gpio) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - ep93xx_gpio_set_direction(gpio, GPIO_IN); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - gpio_set_value(gpio, value); - ep93xx_gpio_set_direction(gpio, GPIO_OUT); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned gpio) -{ - unsigned int data_register; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - return !!(__raw_readb(data_register) & (1 << (gpio & 7))); -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned gpio, int value) +void ep93xx_gpio_int_mask(unsigned line) { - unsigned int data_register; - unsigned long flags; - unsigned char v; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - local_irq_save(flags); - v = __raw_readb(data_register); - if (value) - v |= 1 << (gpio & 7); - else - v &= ~(1 << (gpio & 7)); - __raw_writeb(v, data_register); - local_irq_restore(flags); + gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } -EXPORT_SYMBOL(gpio_set_value); - /************************************************************************* * EP93xx IRQ handling @@ -316,7 +228,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); @@ -332,7 +244,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } @@ -343,7 +255,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } static void ep93xx_gpio_irq_unmask(unsigned int irq) @@ -352,7 +264,7 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } @@ -368,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); - ep93xx_gpio_set_direction(gpio, GPIO_IN); + gpio_direction_output(gpio, gpio_get_value(gpio)); switch (type) { case IRQT_RISING: @@ -411,7 +323,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) desc->status &= ~IRQ_TYPE_SENSE_MASK; desc->status |= type & IRQ_TYPE_SENSE_MASK; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); return 0; } @@ -549,6 +461,7 @@ static struct platform_device ep93xx_ohci_device = { .resource = ep93xx_ohci_resources, }; +extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) { @@ -562,6 +475,8 @@ void __init ep93xx_init_devices(void) __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + ep93xx_gpio_init(); + amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); amba_device_register(&uart3_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c new file mode 100644 index 000000000000..dc2e4c00d989 --- /dev/null +++ b/arch/arm/mach-ep93xx/gpio.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-ep93xx/gpio.c + * + * Generic EP93xx GPIO handling + * + * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> + * + * Based on code originally from: + * linux/arch/arm/mach-ep93xx/core.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/seq_file.h> + +#include <asm/arch/ep93xx-regs.h> +#include <asm/io.h> +#include <asm/gpio.h> + +struct ep93xx_gpio_chip { + struct gpio_chip chip; + + unsigned int data_reg; + unsigned int data_dir_reg; +}; + +#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) + +/* From core.c */ +extern void ep93xx_gpio_int_mask(unsigned line); +extern void ep93xx_gpio_update_int_params(unsigned port); + +static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_dir_reg); + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + int line; + u8 v; + + local_irq_save(flags); + + /* Set the value */ + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + + /* Drive as an output */ + line = chip->base + offset; + if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Ports A/B/F */ + ep93xx_gpio_int_mask(line); + ep93xx_gpio_update_int_params(line >> 3); + } + + v = __raw_readb(ep93xx_chip->data_dir_reg); + v |= (1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + + return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); +} + +static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + local_irq_restore(flags); +} + +static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + u8 data_reg, data_dir_reg; + int i; + + data_reg = __raw_readb(ep93xx_chip->data_reg); + data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); + + for (i = 0; i < chip->ngpio; i++) + seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i, + (data_reg & (1 << i)) ? "set" : "clear", + (data_dir_reg & (1 << i)) ? "out" : "in"); +} + +#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ + { \ + .chip = { \ + .label = name, \ + .direction_input = ep93xx_gpio_direction_input, \ + .direction_output = ep93xx_gpio_direction_output, \ + .get = ep93xx_gpio_get, \ + .set = ep93xx_gpio_set, \ + .dbg_show = ep93xx_gpio_dbg_show, \ + .base = base_gpio, \ + .ngpio = 8, \ + }, \ + .data_reg = EP93XX_GPIO_REG(dr), \ + .data_dir_reg = EP93XX_GPIO_REG(ddr), \ + } + +static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), + EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), + EP93XX_GPIO_BANK("C", 0x30, 0x34, 40), + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), + EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), + EP93XX_GPIO_BANK("F", 0x08, 0x18, 16), + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), + EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), +}; + +void __init ep93xx_gpio_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) + gpiochip_add(&ep93xx_gpio_banks[i].chip); +} diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index dbe07c9472ed..5e8c6f7dfabb 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -34,14 +34,6 @@ config MACH_N2100 Say Y here if you want to run your kernel on the Thecus n2100 NAS appliance. -config IOP3XX_ATU - bool "Enable the PCI Controller" - default y - help - Say Y here if you want the IOP to initialize its PCI Controller. - Say N if the IOP is an add in card, the host system owns the PCI - bus in this case. - config MACH_EM7210 bool "Enable support for the Lanner EM7210" help diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 98cfa1cd6bdb..4a89823bcebb 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -178,10 +178,9 @@ static struct hw_pci iq31244_pci __initdata = { static int __init iq31244_pci_init(void) { - if (is_ep80219()) { - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) - pci_common_init(&ep80219_pci); - } else if (machine_is_iq31244()) { + if (is_ep80219()) + pci_common_init(&ep80219_pci); + else if (machine_is_iq31244()) { if (is_80219()) { printk("note: iq31244 board type has been selected\n"); printk("note: to select ep80219 operation:\n"); @@ -190,9 +189,7 @@ static int __init iq31244_pci_init(void) printk("\t2/ update boot loader to pass" " the ep80219 id: %d\n", MACH_TYPE_EP80219); } - - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) - pci_common_init(&iq31244_pci); + pci_common_init(&iq31244_pci); } return 0; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 18ad29f213b2..1da3c911edd3 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -106,7 +106,7 @@ static struct hw_pci iq80321_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80321_pci_map_irq, }; diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig index 45598e096898..9aa016bb18f9 100644 --- a/arch/arm/mach-iop33x/Kconfig +++ b/arch/arm/mach-iop33x/Kconfig @@ -16,14 +16,6 @@ config MACH_IQ80332 Say Y here if you want to run your kernel on the Intel IQ80332 evaluation kit for the IOP332 chipset. -config IOP3XX_ATU - bool "Enable the PCI Controller" - default y - help - Say Y here if you want the IOP to initialize its PCI Controller. - Say N if the IOP is an add in card, the host system owns the PCI - bus in this case. - endmenu endif diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 433188ebff2a..de39fd778579 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -89,7 +89,7 @@ static struct hw_pci iq80331_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80331_pci_map_irq, }; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 416c09564cc6..4904fd78445f 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -89,7 +89,7 @@ static struct hw_pci iq80332_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, .setup = iop3xx_pci_setup, - .preinit = iop3xx_pci_preinit, + .preinit = iop3xx_pci_preinit_cond, .scan = iop3xx_pci_scan_bus, .map_irq = iq80332_pci_map_irq, }; diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig index 8584ed107991..dd0cd5ac4b8b 100644 --- a/arch/arm/mach-ns9xxx/Kconfig +++ b/arch/arm/mach-ns9xxx/Kconfig @@ -2,9 +2,26 @@ if ARCH_NS9XXX menu "NS9xxx Implementations" +config NS9XXX_HAVE_SERIAL8250 + bool + +config PROCESSOR_NS9360 + bool + +config MODULE_CC9P9360 + bool + select PROCESSOR_NS9360 + +config BOARD_A9M9750DEV + select NS9XXX_HAVE_SERIAL8250 + bool + +config BOARD_JSCC9P9360 + bool + config MACH_CC9P9360DEV bool "ConnectCore 9P 9360 on an A9M9750 Devboard" - select PROCESSOR_NS9360 + select MODULE_CC9P9360 select BOARD_A9M9750DEV help Say Y here if you are using the Digi ConnectCore 9P 9360 @@ -12,21 +29,12 @@ config MACH_CC9P9360DEV config MACH_CC9P9360JS bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard" - select PROCESSOR_NS9360 + select MODULE_CC9P9360 select BOARD_JSCC9P9360 help Say Y here if you are using the Digi ConnectCore 9P 9360 on an JSCC9P9360 Development Board. -config PROCESSOR_NS9360 - bool - -config BOARD_A9M9750DEV - bool - -config BOARD_JSCC9P9360 - bool - endmenu endif diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile index 6fb82b855a55..41efaf9ad50b 100644 --- a/arch/arm/mach-ns9xxx/Makefile +++ b/arch/arm/mach-ns9xxx/Makefile @@ -1,7 +1,12 @@ -obj-y := irq.o time.o generic.o gpio.o +obj-y := clock.o generic.o gpio.o irq.o obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o +obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o + obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o + +# platform devices +obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot index 75ed64e90fa4..54654919229b 100644 --- a/arch/arm/mach-ns9xxx/Makefile.boot +++ b/arch/arm/mach-ns9xxx/Makefile.boot @@ -1,2 +1,2 @@ -zreladdr-y := 0x108000 +zreladdr-y := 0x8000 params_phys-y := 0x100 diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 0f65177f9e5f..a494b71c0195 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -8,15 +8,14 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include <linux/platform_device.h> -#include <linux/serial_8250.h> #include <linux/irq.h> #include <asm/mach/map.h> #include <asm/gpio.h> #include <asm/arch-ns9xxx/board.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> #include <asm/arch-ns9xxx/regs-mem.h> #include <asm/arch-ns9xxx/regs-bbu.h> #include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> @@ -105,9 +104,9 @@ void __init board_a9m9750dev_init_irq(void) int i; if (gpio_request(11, "board a9m9750dev extirq2") == 0) - ns9xxx_gpio_configure(11, 0, 1); + ns9360_gpio_configure(11, 0, 1); else - printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n", + printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n", __func__); for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { @@ -116,69 +115,16 @@ void __init board_a9m9750dev_init_irq(void) set_irq_flags(i, IRQF_VALID); } - /* IRQ_EXT2: level sensitive + active low */ + /* IRQ_NS9XXX_EXT2: level sensitive + active low */ eic = __raw_readl(SYS_EIC(2)); REGSET(eic, SYS_EIC, PLTY, AL); REGSET(eic, SYS_EIC, LVEDG, LEVEL); __raw_writel(eic, SYS_EIC(2)); - set_irq_chained_handler(IRQ_EXT2, + set_irq_chained_handler(IRQ_NS9XXX_EXT2, a9m9750dev_fpga_demux_handler); } -static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = { - { - .iobase = FPGA_UARTA_BASE, - .membase = (unsigned char*)FPGA_UARTA_BASE, - .mapbase = FPGA_UARTA_BASE, - .irq = IRQ_FPGA_UARTA, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTB_BASE, - .membase = (unsigned char*)FPGA_UARTB_BASE, - .mapbase = FPGA_UARTB_BASE, - .irq = IRQ_FPGA_UARTB, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTC_BASE, - .membase = (unsigned char*)FPGA_UARTC_BASE, - .mapbase = FPGA_UARTC_BASE, - .irq = IRQ_FPGA_UARTC, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - .iobase = FPGA_UARTD_BASE, - .membase = (unsigned char*)FPGA_UARTD_BASE, - .mapbase = FPGA_UARTD_BASE, - .irq = IRQ_FPGA_UARTD, - .iotype = UPIO_MEM, - .uartclk = 18432000, - .regshift = 0, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - }, { - /* end marker */ - }, -}; - -static struct platform_device board_a9m9750dev_serial_device = { - .name = "serial8250", - .dev = { - .platform_data = board_a9m9750dev_serial8250_port, - }, -}; - -static struct platform_device *board_a9m9750dev_devices[] __initdata = { - &board_a9m9750dev_serial_device, -}; - void __init board_a9m9750dev_init_machine(void) { u32 reg; @@ -210,7 +156,4 @@ void __init board_a9m9750dev_init_machine(void) __raw_writel(0x2, MEM_SMOED(0)); __raw_writel(0x6, MEM_SMRD(0)); __raw_writel(0x6, MEM_SMWD(0)); - - platform_add_devices(board_a9m9750dev_devices, - ARRAY_SIZE(board_a9m9750dev_devices)); } diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c new file mode 100644 index 000000000000..f8639161068f --- /dev/null +++ b/arch/arm/mach-ns9xxx/clock.c @@ -0,0 +1,215 @@ +/* + * arch/arm/mach-ns9xxx/clock.c + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/err.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <asm/semaphore.h> +#include "clock.h" + +static LIST_HEAD(clocks); +static DEFINE_SPINLOCK(clk_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *ret = NULL, *retgen = NULL; + unsigned long flags; + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + spin_lock_irqsave(&clk_lock, flags); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0) { + if (p->id == idno) { + if (!try_module_get(p->owner)) + continue; + ret = p; + break; + } else if (p->id == -1) + /* remember match with id == -1 in case there is + * no clock for idno */ + retgen = p; + } + } + + if (!ret && retgen && try_module_get(retgen->owner)) + ret = retgen; + + if (ret) + ++ret->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret ? ret : ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); + --clk->refcount; +} +EXPORT_SYMBOL(clk_put); + +static int clk_enable_unlocked(struct clk *clk) +{ + int ret = 0; + if (clk->parent) { + ret = clk_enable_unlocked(clk->parent); + if (ret) + return ret; + } + + if (clk->usage++ == 0 && clk->endisable) + ret = clk->endisable(clk, 1); + + return ret; +} + +int clk_enable(struct clk *clk) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + ret = clk_enable_unlocked(clk); + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +static void clk_disable_unlocked(struct clk *clk) +{ + if (--clk->usage == 0 && clk->endisable) + clk->endisable(clk, 0); + + if (clk->parent) + clk_disable_unlocked(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + clk_disable_unlocked(clk); + + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk->get_rate) + return clk->get_rate(clk); + + if (clk->rate) + return clk->rate; + + if (clk->parent) + return clk_get_rate(clk->parent); + + return 0; +} +EXPORT_SYMBOL(clk_get_rate); + +int clk_register(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + list_add(&clk->node, &clocks); + + if (clk->parent) + ++clk->parent->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} + +int clk_unregister(struct clk *clk) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + + if (clk->usage || clk->refcount) + ret = -EBUSY; + else + list_del(&clk->node); + + if (clk->parent) + --clk->parent->refcount; + + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} + +#if defined CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static int clk_debugfs_show(struct seq_file *s, void *null) +{ + unsigned long flags; + struct clk *p; + + spin_lock_irqsave(&clk_lock, flags); + + list_for_each_entry(p, &clocks, node) + seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n", + p->name, p->id, p->usage, p->refcount, + p->usage ? clk_get_rate(p) : 0); + + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} + +static int clk_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_debugfs_show, NULL); +} + +static struct file_operations clk_debugfs_operations = { + .open = clk_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init clk_debugfs_init(void) +{ + struct dentry *dentry; + + dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL, + &clk_debugfs_operations); + return IS_ERR(dentry) ? PTR_ERR(dentry) : 0; +} +subsys_initcall(clk_debugfs_init); + +#endif /* if defined CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-ns9xxx/clock.h b/arch/arm/mach-ns9xxx/clock.h new file mode 100644 index 000000000000..b86c30dd79eb --- /dev/null +++ b/arch/arm/mach-ns9xxx/clock.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-ns9xxx/clock.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __NS9XXX_CLOCK_H +#define __NS9XXX_CLOCK_H + +#include <linux/list.h> + +struct clk { + struct module *owner; + const char *name; + int id; + + struct clk *parent; + + unsigned long rate; + int (*endisable)(struct clk *, int enable); + unsigned long (*get_rate)(struct clk *); + + struct list_head node; + unsigned long refcount; + unsigned long usage; +}; + +int clk_register(struct clk *clk); +int clk_unregister(struct clk *clk); + +#endif /* ifndef __NS9XXX_CLOCK_H */ diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c index d742c921e34d..1e0f467879cc 100644 --- a/arch/arm/mach-ns9xxx/generic.c +++ b/arch/arm/mach-ns9xxx/generic.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,34 +11,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <asm/memory.h> -#include <asm/page.h> -#include <asm/mach-types.h> -#include <asm/mach/map.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/arch-ns9xxx/regs-mem.h> -#include <asm/arch-ns9xxx/board.h> #include "generic.h" -static struct map_desc standard_io_desc[] __initdata = { - { /* BBus */ - .virtual = io_p2v(0x90000000), - .pfn = __phys_to_pfn(0x90000000), - .length = 0x00700000, - .type = MT_DEVICE, - }, { /* AHB */ - .virtual = io_p2v(0xa0100000), - .pfn = __phys_to_pfn(0xa0100000), - .length = 0x00900000, - .type = MT_DEVICE, - }, -}; - -void __init ns9xxx_map_io(void) -{ - iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); -} - void __init ns9xxx_init_machine(void) { } diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h index 687e291773f4..82493191aad6 100644 --- a/arch/arm/mach-ns9xxx/generic.h +++ b/arch/arm/mach-ns9xxx/generic.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,7 +13,4 @@ #include <linux/init.h> void __init ns9xxx_init_irq(void); -void __init ns9xxx_map_io(void); void __init ns9xxx_init_machine(void); - -extern struct sys_timer ns9xxx_timer; diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c new file mode 100644 index 000000000000..cabfb879dda9 --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/arch-ns9xxx/regs-bbu.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + +#include "gpio-ns9360.h" + +static inline int ns9360_valid_gpio(unsigned gpio) +{ + return gpio <= 72; +} + +static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio) +{ + if (gpio < 56) + return BBU_GCONFb1(gpio / 8); + else + /* + * this could be optimised away on + * ns9750 only builds, but it isn't ... + */ + return BBU_GCONFb2((gpio - 56) / 8); +} + +static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GCTRL1; + else if (gpio < 64) + return BBU_GCTRL2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GCTRL3; +} + +static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GSTAT1; + else if (gpio < 64) + return BBU_GSTAT2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GSTAT3; +} + +/* + * each gpio can serve for 4 different purposes [0..3]. These are called + * "functions" and passed in the parameter func. Functions 0-2 are always some + * special things, function 3 is GPIO. If func == 3 dir specifies input or + * output, and with inv you can enable an inverter (independent of func). + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func) +{ + void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio); + u32 confval; + + confval = __raw_readl(conf); + REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); + REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); + REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); + __raw_writel(confval, conf); + + return 0; +} + +int ns9360_gpio_configure(unsigned gpio, int inv, int func) +{ + if (likely(ns9360_valid_gpio(gpio))) { + if (func == 3) { + printk(KERN_WARNING "use gpio_direction_input " + "or gpio_direction_output\n"); + return -EINVAL; + } else + return __ns9360_gpio_configure(gpio, 0, inv, func); + } else + return -EINVAL; +} +EXPORT_SYMBOL(ns9360_gpio_configure); + +int ns9360_gpio_get_value(unsigned gpio) +{ + void __iomem *stat = ns9360_gpio_get_gstataddr(gpio); + int ret; + + ret = 1 & (__raw_readl(stat) >> (gpio & 31)); + + return ret; +} + +void ns9360_gpio_set_value(unsigned gpio, int value) +{ + void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio); + u32 ctrlval; + + ctrlval = __raw_readl(ctrl); + + if (value) + ctrlval |= 1 << (gpio & 31); + else + ctrlval &= ~(1 << (gpio & 31)); + + __raw_writel(ctrlval, ctrl); +} diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.h b/arch/arm/mach-ns9xxx/gpio-ns9360.h new file mode 100644 index 000000000000..131cd1715caa --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.h + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func); +int ns9360_gpio_get_value(unsigned gpio); +void ns9360_gpio_set_value(unsigned gpio, int value); diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index 5286e9fc1d30..b3c963b0c8f5 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/gpio.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -15,12 +15,13 @@ #include <asm/arch-ns9xxx/gpio.h> #include <asm/arch-ns9xxx/processor.h> -#include <asm/arch-ns9xxx/regs-bbu.h> -#include <asm/io.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> #include <asm/bug.h> #include <asm/types.h> #include <asm/bitops.h> +#include "gpio-ns9360.h" + #if defined(CONFIG_PROCESSOR_NS9360) #define GPIO_MAX 72 #elif defined(CONFIG_PROCESSOR_NS9750) @@ -45,41 +46,10 @@ static inline int ns9xxx_valid_gpio(unsigned gpio) return gpio <= 49; else #endif + { BUG(); -} - -static inline void __iomem *ns9xxx_gpio_get_gconfaddr(unsigned gpio) -{ - if (gpio < 56) - return BBU_GCONFb1(gpio / 8); - else - /* - * this could be optimised away on - * ns9750 only builds, but it isn't ... - */ - return BBU_GCONFb2((gpio - 56) / 8); -} - -static inline void __iomem *ns9xxx_gpio_get_gctrladdr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GCTRL1; - else if (gpio < 64) - return BBU_GCTRL2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GCTRL3; -} - -static inline void __iomem *ns9xxx_gpio_get_gstataddr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GSTAT1; - else if (gpio < 64) - return BBU_GSTAT2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GSTAT3; + return 0; + } } int gpio_request(unsigned gpio, const char *label) @@ -98,49 +68,24 @@ void gpio_free(unsigned gpio) } EXPORT_SYMBOL(gpio_free); -/* - * each gpio can serve for 4 different purposes [0..3]. These are called - * "functions" and passed in the parameter func. Functions 0-2 are always some - * special things, function 3 is GPIO. If func == 3 dir specifies input or - * output, and with inv you can enable an inverter (independent of func). - */ -static int __ns9xxx_gpio_configure(unsigned gpio, int dir, int inv, int func) +int gpio_direction_input(unsigned gpio) { - void __iomem *conf = ns9xxx_gpio_get_gconfaddr(gpio); - u32 confval; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - confval = __raw_readl(conf); - REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); - REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); - REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); - __raw_writel(confval, conf); + if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 0, 0, 3); + else +#endif + BUG(); - return 0; -} + spin_unlock_irqrestore(&gpio_lock, flags); -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - if (func == 3) { - printk(KERN_WARNING "use gpio_direction_input " - "or gpio_direction_output\n"); - return -EINVAL; - } else - return __ns9xxx_gpio_configure(gpio, 0, inv, func); - } else - return -EINVAL; -} -EXPORT_SYMBOL(ns9xxx_gpio_configure); + return ret; -int gpio_direction_input(unsigned gpio) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - return __ns9xxx_gpio_configure(gpio, 0, 0, 3); } else return -EINVAL; } @@ -149,9 +94,22 @@ EXPORT_SYMBOL(gpio_direction_input); int gpio_direction_output(unsigned gpio, int value) { if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; + gpio_set_value(gpio, value); - return __ns9xxx_gpio_configure(gpio, 1, 0, 3); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 1, 0, 3); + else +#endif + BUG(); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return ret; } else return -EINVAL; } @@ -159,31 +117,28 @@ EXPORT_SYMBOL(gpio_direction_output); int gpio_get_value(unsigned gpio) { - void __iomem *stat = ns9xxx_gpio_get_gstataddr(gpio); - int ret; - - ret = 1 & (__raw_readl(stat) >> (gpio & 31)); - - return ret; +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + return ns9360_gpio_get_value(gpio); + else +#endif + { + BUG(); + return -EINVAL; + } } EXPORT_SYMBOL(gpio_get_value); void gpio_set_value(unsigned gpio, int value) { - void __iomem *ctrl = ns9xxx_gpio_get_gctrladdr(gpio); - u32 ctrlval; unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - - ctrlval = __raw_readl(ctrl); - - if (value) - ctrlval |= 1 << (gpio & 31); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ns9360_gpio_set_value(gpio, value); else - ctrlval &= ~(1 << (gpio & 31)); - - __raw_writel(ctrlval, ctrl); +#endif + BUG(); spin_unlock_irqrestore(&gpio_lock, flags); } diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 00001b874e97..36e5835e6097 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -9,21 +9,27 @@ * the Free Software Foundation. */ #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <asm/io.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-sys-common.h> #include <asm/arch-ns9xxx/irqs.h> #include <asm/arch-ns9xxx/board.h> #include "generic.h" +/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */ +#define irq2prio(i) (i) +#define prio2irq(p) (p) + static void ns9xxx_mask_irq(unsigned int irq) { /* XXX: better use cpp symbols */ - u32 ic = __raw_readl(SYS_IC(irq / 4)); - ic &= ~(1 << (7 + 8 * (3 - (irq & 3)))); - __raw_writel(ic, SYS_IC(irq / 4)); + int prio = irq2prio(irq); + u32 ic = __raw_readl(SYS_IC(prio / 4)); + ic &= ~(1 << (7 + 8 * (3 - (prio & 3)))); + __raw_writel(ic, SYS_IC(prio / 4)); } static void ns9xxx_ack_irq(unsigned int irq) @@ -40,9 +46,10 @@ static void ns9xxx_maskack_irq(unsigned int irq) static void ns9xxx_unmask_irq(unsigned int irq) { /* XXX: better use cpp symbols */ - u32 ic = __raw_readl(SYS_IC(irq / 4)); - ic |= 1 << (7 + 8 * (3 - (irq & 3))); - __raw_writel(ic, SYS_IC(irq / 4)); + int prio = irq2prio(irq); + u32 ic = __raw_readl(SYS_IC(prio / 4)); + ic |= 1 << (7 + 8 * (3 - (prio & 3))); + __raw_writel(ic, SYS_IC(prio / 4)); } static struct irq_chip ns9xxx_chip = { @@ -52,24 +59,61 @@ static struct irq_chip ns9xxx_chip = { .unmask = ns9xxx_unmask_irq, }; +#if 0 +#define handle_irq handle_level_irq +#else +void handle_prio_irq(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cpu = smp_processor_id(); + struct irqaction *action; + irqreturn_t action_ret; + + spin_lock(&desc->lock); + + if (unlikely(desc->status & IRQ_INPROGRESS)) + goto out_unlock; + + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + kstat_cpu(cpu).irqs[irq]++; + + action = desc->action; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) + goto out_unlock; + + desc->status |= IRQ_INPROGRESS; + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, action); + + spin_lock(&desc->lock); + desc->status &= ~IRQ_INPROGRESS; + if (!(desc->status & IRQ_DISABLED) && desc->chip->ack) + desc->chip->ack(irq); + +out_unlock: + spin_unlock(&desc->lock); +} +#define handle_irq handle_prio_irq +#endif + void __init ns9xxx_init_irq(void) { int i; /* disable all IRQs */ for (i = 0; i < 8; ++i) - __raw_writel((4 * i) << 24 | (4 * i + 1) << 16 | - (4 * i + 2) << 8 | (4 * i + 3), SYS_IC(i)); + __raw_writel(prio2irq(4 * i) << 24 | + prio2irq(4 * i + 1) << 16 | + prio2irq(4 * i + 2) << 8 | + prio2irq(4 * i + 3), + SYS_IC(i)); - /* simple interrupt prio table: - * prio(x) < prio(y) <=> x < y - */ for (i = 0; i < 32; ++i) - __raw_writel(i, SYS_IVA(i)); + __raw_writel(prio2irq(i), SYS_IVA(i)); - for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) { + for (i = 0; i <= 31; ++i) { set_irq_chip(i, &ns9xxx_chip); - set_irq_handler(i, handle_level_irq); + set_irq_handler(i, handle_irq); set_irq_flags(i, IRQF_VALID); } } diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c index 760c9d0db7c3..9623fff6b3bc 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,12 +11,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + #include "board-a9m9750dev.h" #include "generic.h" static void __init mach_cc9p9360dev_map_io(void) { - ns9xxx_map_io(); + ns9360_map_io(); board_a9m9750dev_map_io(); } @@ -36,6 +38,6 @@ MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard") .map_io = mach_cc9p9360dev_map_io, .init_irq = mach_cc9p9360dev_init_irq, .init_machine = mach_cc9p9360dev_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index 85c8b41105c9..fcc815bdd291 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360js.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,6 +11,8 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> + #include "board-jscc9p9360.h" #include "generic.h" @@ -21,9 +23,9 @@ static void __init mach_cc9p9360js_init_machine(void) } MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") - .map_io = ns9xxx_map_io, + .map_io = ns9360_map_io, .init_irq = ns9xxx_init_irq, .init_machine = mach_cc9p9360js_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c new file mode 100644 index 000000000000..5aa5d9baf8c8 --- /dev/null +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ns9xxx/plat-serial8250.c + * + * Copyright (C) 2008 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h> +#include <asm/arch-ns9xxx/board.h> + +#define DRIVER_NAME "serial8250" + +static int __init ns9xxx_plat_serial8250_init(void) +{ + struct plat_serial8250_port *pdata; + struct platform_device *pdev; + int ret = -ENOMEM; + int i; + + if (!board_is_a9m9750dev()) + return -ENODEV; + + pdev = platform_device_alloc(DRIVER_NAME, 0); + if (!pdev) + goto err; + + pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto err; + + pdev->dev.platform_data = pdata; + + pdata[0].iobase = FPGA_UARTA_BASE; + pdata[1].iobase = FPGA_UARTB_BASE; + pdata[2].iobase = FPGA_UARTC_BASE; + pdata[3].iobase = FPGA_UARTD_BASE; + + for (i = 0; i < 4; ++i) { + pdata[i].membase = (void __iomem *)pdata[i].iobase; + pdata[i].mapbase = pdata[i].iobase; + pdata[i].iotype = UPIO_MEM; + pdata[i].uartclk = 18432000; + pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + } + + pdata[0].irq = IRQ_FPGA_UARTA; + pdata[1].irq = IRQ_FPGA_UARTB; + pdata[2].irq = IRQ_FPGA_UARTC; + pdata[3].irq = IRQ_FPGA_UARTD; + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + + printk(KERN_WARNING "Could not add %s (errno=%d)\n", + DRIVER_NAME, ret); + } + + return 0; +} + +arch_initcall(ns9xxx_plat_serial8250_init); diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c new file mode 100644 index 000000000000..2bee0b7fccbb --- /dev/null +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -0,0 +1,54 @@ +/* + * arch/arm/mach-ns9xxx/processor-ns9360.c + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> + +void ns9360_reset(char mode) +{ + u32 reg; + + reg = __raw_readl(SYS_PLL) >> 16; + REGSET(reg, SYS_PLL, SWC, YES); + __raw_writel(reg, SYS_PLL); +} + +#define CRYSTAL 29491200 /* Hz */ +unsigned long ns9360_systemclock(void) +{ + u32 pll = __raw_readl(SYS_PLL); + return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) + >> REGGETIM(pll, SYS_PLL, FS); +} + +static struct map_desc ns9360_io_desc[] __initdata = { + { /* BBus */ + .virtual = io_p2v(0x90000000), + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00700000, + .type = MT_DEVICE, + }, { /* AHB */ + .virtual = io_p2v(0xa0100000), + .pfn = __phys_to_pfn(0xa0100000), + .length = 0x00900000, + .type = MT_DEVICE, + }, +}; + +void __init ns9360_map_io(void) +{ + iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc)); +} diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time-ns9360.c index c3dd1f4acb99..4d573c9793ed 100644 --- a/arch/arm/mach-ns9xxx/time.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -1,7 +1,7 @@ /* - * arch/arm/mach-ns9xxx/time.c + * arch/arm/mach-ns9xxx/time-ns9360.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -15,8 +15,8 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/arch-ns9xxx/clock.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> +#include <asm/arch-ns9xxx/regs-sys-ns9360.h> #include <asm/arch-ns9xxx/irqs.h> #include <asm/arch/system.h> #include "generic.h" @@ -25,26 +25,26 @@ #define TIMER_CLOCKEVENT 1 static u32 latch; -static cycle_t ns9xxx_clocksource_read(void) +static cycle_t ns9360_clocksource_read(void) { return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); } -static struct clocksource ns9xxx_clocksource = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKSOURCE), +static struct clocksource ns9360_clocksource = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE), .rating = 300, - .read = ns9xxx_clocksource_read, + .read = ns9360_clocksource_read, .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void ns9xxx_clockevent_setmode(enum clock_event_mode mode, +static void ns9360_clockevent_setmode(enum clock_event_mode mode, struct clock_event_device *clk) { u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - switch(mode) { + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT)); REGSET(tc, SYS_TCx, REN, EN); @@ -69,7 +69,7 @@ static void ns9xxx_clockevent_setmode(enum clock_event_mode mode, __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); } -static int ns9xxx_clockevent_setnextevent(unsigned long evt, +static int ns9360_clockevent_setnextevent(unsigned long evt, struct clock_event_device *clk) { u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); @@ -88,20 +88,20 @@ static int ns9xxx_clockevent_setnextevent(unsigned long evt, return 0; } -static struct clock_event_device ns9xxx_clockevent_device = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), +static struct clock_event_device ns9360_clockevent_device = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), .shift = 20, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = ns9xxx_clockevent_setmode, - .set_next_event = ns9xxx_clockevent_setnextevent, + .set_mode = ns9360_clockevent_setmode, + .set_next_event = ns9360_clockevent_setnextevent, }; -static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id) +static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id) { - int timerno = irq - IRQ_TIMER0; + int timerno = irq - IRQ_NS9360_TIMER0; u32 tc; - struct clock_event_device *evt = &ns9xxx_clockevent_device; + struct clock_event_device *evt = &ns9360_clockevent_device; /* clear irq */ tc = __raw_readl(SYS_TC(timerno)); @@ -119,13 +119,13 @@ static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ns9xxx_clockevent_action = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), +static struct irqaction ns9360_clockevent_action = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ns9xxx_clockevent_handler, + .handler = ns9360_clockevent_handler, }; -static void __init ns9xxx_timer_init(void) +static void __init ns9360_timer_init(void) { int tc; @@ -148,12 +148,12 @@ static void __init ns9xxx_timer_init(void) __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - ns9xxx_clocksource.mult = clocksource_hz2mult(ns9xxx_cpuclock(), - ns9xxx_clocksource.shift); + ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(), + ns9360_clocksource.shift); - clocksource_register(&ns9xxx_clocksource); + clocksource_register(&ns9360_clocksource); - latch = SH_DIV(ns9xxx_cpuclock(), HZ, 0); + latch = SH_DIV(ns9360_cpuclock(), HZ, 0); tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); REGSET(tc, SYS_TCx, TEN, DIS); @@ -166,19 +166,20 @@ static void __init ns9xxx_timer_init(void) REGSET(tc, SYS_TCx, REN, EN); __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - ns9xxx_clockevent_device.mult = div_sc(ns9xxx_cpuclock(), - NSEC_PER_SEC, ns9xxx_clockevent_device.shift); - ns9xxx_clockevent_device.max_delta_ns = - clockevent_delta2ns(-1, &ns9xxx_clockevent_device); - ns9xxx_clockevent_device.min_delta_ns = - clockevent_delta2ns(1, &ns9xxx_clockevent_device); + ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(), + NSEC_PER_SEC, ns9360_clockevent_device.shift); + ns9360_clockevent_device.max_delta_ns = + clockevent_delta2ns(-1, &ns9360_clockevent_device); + ns9360_clockevent_device.min_delta_ns = + clockevent_delta2ns(1, &ns9360_clockevent_device); - ns9xxx_clockevent_device.cpumask = cpumask_of_cpu(0); - clockevents_register_device(&ns9xxx_clockevent_device); + ns9360_clockevent_device.cpumask = cpumask_of_cpu(0); + clockevents_register_device(&ns9360_clockevent_device); - setup_irq(IRQ_TIMER0 + TIMER_CLOCKEVENT, &ns9xxx_clockevent_action); + setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT, + &ns9360_clockevent_action); } -struct sys_timer ns9xxx_timer = { - .init = ns9xxx_timer_init, +struct sys_timer ns9360_timer = { + .init = ns9360_timer_init, }; diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c deleted file mode 100644 index 58cc3c0333b6..000000000000 --- a/arch/arm/mach-orion/addr-map.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * arch/arm/mach-orion/addr-map.c - * - * Address map functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/hardware.h> -#include "common.h" - -/* - * The Orion has fully programable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, - * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own - * address decode windows that allow it to access any of the Orion resources. - * - * CPU address decoding -- - * Linux assumes that it is the boot loader that already setup the access to - * DDR and internal registers. - * Setup access to PCI and PCI-E IO/MEM space is issued by core.c. - * Setup access to various devices located on the device bus interface (e.g. - * flashes, RTC, etc) should be issued by machine-setup.c according to - * specific board population (by using orion_setup_cpu_win()). - * - * Non-CPU Masters address decoding -- - * Unlike the CPU, we setup the access from Orion's master interfaces to DDR - * banks only (the typical use case). - * Setup access for each master to DDR is issued by common.c. - * - * Note: although orion_setbits() and orion_clrbits() are not atomic - * no locking is necessary here since code in this file is only called - * at boot time when there is no concurrency issues. - */ - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_PCI 3 -#define TARGET_PCIE 4 -#define TARGET_DEV_BUS 1 -#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ - ((n) == 1) ? 0xd : \ - ((n) == 2) ? 0xb : \ - ((n) == 3) ? 0x7 : 0xf) -#define ATTR_PCIE_MEM 0x59 -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCI_MEM 0x59 -#define ATTR_PCI_IO 0x51 -#define ATTR_DEV_CS0 0x1e -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_BOOT 0xf -#define WIN_EN 1 - -/* - * Helpers to get DDR banks info - */ -#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) -#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) -#define DDR_MAX_CS 4 -#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) -#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) -#define DDR_BANK_EN 1 - -/* - * CPU Address Decode Windows registers - */ -#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) -#define CPU_MAX_WIN 8 - -/* - * Use this CPU address decode windows allocation - */ -#define CPU_WIN_PCIE_IO 0 -#define CPU_WIN_PCI_IO 1 -#define CPU_WIN_PCIE_MEM 2 -#define CPU_WIN_PCI_MEM 3 -#define CPU_WIN_DEV_BOOT 4 -#define CPU_WIN_DEV_CS0 5 -#define CPU_WIN_DEV_CS1 6 -#define CPU_WIN_DEV_CS2 7 - -/* - * PCIE Address Decode Windows registers - */ -#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) -#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) -#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1880)) -#define PCIE_WIN_BASE(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1884)) -#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x182c + ((n) << 4)) : \ - ORION_PCIE_REG(0x188c)) -#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) -#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) -#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) -#define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 6 - -/* - * Use PCIE BAR '1' for all DDR banks - */ -#define PCIE_DRAM_BAR 1 - -/* - * PCI Address Decode Windows registers - */ -#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ - ((n) == 1) ? ORION_PCI_REG(0xd08) : \ - ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) -#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ - ((n) == 1) ? ORION_PCI_REG(0xd48) : \ - ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) -#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) -#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4)) -#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4)) -#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4)) -#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) - -/* - * PCI configuration heleprs for BAR settings - */ -#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) -#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) -#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) - -/* - * Gigabit Ethernet Address Decode Windows registers - */ -#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) -#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) -#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) -#define ETH_WIN_EN ORION_ETH_REG(0x290) -#define ETH_WIN_PROT ORION_ETH_REG(0x294) -#define ETH_MAX_WIN 6 -#define ETH_MAX_REMAP_WIN 4 - -/* - * USB Address Decode Windows registers - */ -#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ - : ORION_USB1_REG(0x320 + ((w) << 4))) -#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ - : ORION_USB1_REG(0x324 + ((w) << 4))) -#define USB_MAX_WIN 4 - -/* - * SATA Address Decode Windows registers - */ -#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10)) -#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10)) -#define SATA_MAX_WIN 4 - -static int __init orion_cpu_win_can_remap(u32 win) -{ - u32 dev, rev; - - orion_pcie_id(&dev, &rev); - if ((dev == MV88F5281_DEV_ID && win < 4) - || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2)) - return 1; - - return 0; -} - -void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap) -{ - u32 win, attr, ctrl; - - switch (target) { - case ORION_PCIE_IO: - target = TARGET_PCIE; - attr = ATTR_PCIE_IO; - win = CPU_WIN_PCIE_IO; - break; - case ORION_PCI_IO: - target = TARGET_PCI; - attr = ATTR_PCI_IO; - win = CPU_WIN_PCI_IO; - break; - case ORION_PCIE_MEM: - target = TARGET_PCIE; - attr = ATTR_PCIE_MEM; - win = CPU_WIN_PCIE_MEM; - break; - case ORION_PCI_MEM: - target = TARGET_PCI; - attr = ATTR_PCI_MEM; - win = CPU_WIN_PCI_MEM; - break; - case ORION_DEV_BOOT: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_BOOT; - win = CPU_WIN_DEV_BOOT; - break; - case ORION_DEV0: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS0; - win = CPU_WIN_DEV_CS0; - break; - case ORION_DEV1: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS1; - win = CPU_WIN_DEV_CS1; - break; - case ORION_DEV2: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS2; - win = CPU_WIN_DEV_CS2; - break; - case ORION_DDR: - case ORION_REGS: - /* - * Must be mapped by bootloader. - */ - default: - target = attr = win = -1; - BUG(); - } - - base &= 0xffff0000; - ctrl = (((size - 1) & 0xffff0000) | (attr << 8) | - (target << 4) | WIN_EN); - - orion_write(CPU_WIN_BASE(win), base); - orion_write(CPU_WIN_CTRL(win), ctrl); - - if (orion_cpu_win_can_remap(win)) { - if (remap >= 0) { - orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } else { - orion_write(CPU_WIN_REMAP_LO(win), base); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } - } -} - -void __init orion_setup_cpu_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < CPU_MAX_WIN; i++) { - orion_write(CPU_WIN_BASE(i), 0); - orion_write(CPU_WIN_CTRL(i), 0); - if (orion_cpu_win_can_remap(i)) { - orion_write(CPU_WIN_REMAP_LO(i), 0); - orion_write(CPU_WIN_REMAP_HI(i), 0); - } - } - - /* - * Setup windows for PCI+PCIe IO+MEM space. - */ - orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, - ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, - ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, - ORION_PCIE_MEM_SIZE, -1); - orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, - ORION_PCI_MEM_SIZE, -1); -} - -/* - * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks - * WIN[0-3] -> DRAM bank[0-3] - */ -void __init orion_setup_pcie_wins(void) -{ - u32 base, size, i; - - /* - * First, disable and clear BARs and windows - */ - for (i = 1; i < PCIE_MAX_BARS; i++) { - orion_write(PCIE_BAR_CTRL(i), 0); - orion_write(PCIE_BAR_LO(i), 0); - orion_write(PCIE_BAR_HI(i), 0); - } - - for (i = 0; i < PCIE_MAX_WINS; i++) { - orion_write(PCIE_WIN_CTRL(i), 0); - orion_write(PCIE_WIN_BASE(i), 0); - orion_write(PCIE_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. Count total DDR size on the fly. - */ - base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0))); - size = 0; - for (i = 0; i < DDR_MAX_CS; i++) { - u32 bank_base, bank_size; - bank_size = orion_read(DDR_SIZE_CS(i)); - bank_base = orion_read(DDR_BASE_CS(i)); - if (bank_size & DDR_BANK_EN) { - bank_size = DDR_REG_TO_SIZE(bank_size); - bank_base = DDR_REG_TO_BASE(bank_base); - orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000); - orion_write(PCIE_WIN_REMAP(i), 0); - orion_write(PCIE_WIN_CTRL(i), - ((bank_size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | - (PCIE_DRAM_BAR << 1) | WIN_EN); - size += bank_size; - } - } - - /* - * Setup BAR[1] to all DRAM banks - */ - orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000); - orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0); - orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR), - ((size - 1) & 0xffff0000) | WIN_EN); -} - -void __init orion_setup_pci_wins(void) -{ - u32 base, size, i; - - /* - * First, disable windows - */ - orion_write(PCI_BAR_ENABLE, 0xffffffff); - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - base = orion_read(DDR_BASE_CS(i)); - size = orion_read(DDR_SIZE_CS(i)); - if (size & DDR_BANK_EN) { - u32 bus, dev, func, reg, val; - size = DDR_REG_TO_SIZE(size); - base = DDR_REG_TO_BASE(base); - bus = orion_pci_local_bus_nr(); - dev = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_BAR_CS(i); - reg = PCI_CONF_REG_BAR_LO_CS(i); - orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, - (base & 0xfffff000) | (val & 0xfff)); - reg = PCI_CONF_REG_BAR_HI_CS(i); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0); - orion_write(PCI_BAR_SIZE_DDR_CS(i), - (size - 1) & 0xfffff000); - orion_write(PCI_BAR_REMAP_DDR_CS(i), - base & 0xfffff000); - orion_clrbits(PCI_BAR_ENABLE, (1 << i)); - } - } - - /* - * Disable automatic update of address remaping when writing to BARs - */ - orion_setbits(PCI_ADDR_DECODE_CTRL, 1); -} - -void __init orion_setup_usb_wins(void) -{ - int i; - u32 usb_if, dev, rev; - u32 max_usb_if = 1; - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5182_DEV_ID) - max_usb_if = 2; - - for (usb_if = 0; usb_if < max_usb_if; usb_if++) { - /* - * First, disable and clear windows - */ - for (i = 0; i < USB_MAX_WIN; i++) { - orion_write(USB_WIN_BASE(usb_if, i), 0); - orion_write(USB_WIN_CTRL(usb_if, i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(USB_WIN_CTRL(usb_if, i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(USB_WIN_BASE(usb_if, i), - base & 0xffff0000); - } - } - } -} - -void __init orion_setup_eth_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < ETH_MAX_WIN; i++) { - orion_write(ETH_WIN_BASE(i), 0); - orion_write(ETH_WIN_SIZE(i), 0); - orion_setbits(ETH_WIN_EN, 1 << i); - orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); - if (i < ETH_MAX_REMAP_WIN) - orion_write(ETH_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); - orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - TARGET_DDR); - orion_clrbits(ETH_WIN_EN, 1 << i); - orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); - } - } -} - -void __init orion_setup_sata_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < SATA_MAX_WIN; i++) { - orion_write(SATA_WIN_BASE(i), 0); - orion_write(SATA_WIN_CTRL(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(SATA_WIN_CTRL(i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(SATA_WIN_BASE(i), - base & 0xffff0000); - } - } -} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h deleted file mode 100644 index 501497cc2c4d..000000000000 --- a/arch/arm/mach-orion/common.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ARCH_ORION_COMMON_H__ -#define __ARCH_ORION_COMMON_H__ - -/* - * Basic Orion init functions used early by machine-setup. - */ - -void __init orion_map_io(void); -void __init orion_init_irq(void); -void __init orion_init(void); - -/* - * Enumerations and functions for Orion windows mapping. Used by Orion core - * functions to map its interfaces and by the machine-setup to map its on- - * board devices. Details in /mach-orion/addr-map.c - */ - -enum orion_target { - ORION_DEV_BOOT = 0, - ORION_DEV0, - ORION_DEV1, - ORION_DEV2, - ORION_PCIE_MEM, - ORION_PCIE_IO, - ORION_PCI_MEM, - ORION_PCI_IO, - ORION_DDR, - ORION_REGS, - ORION_MAX_TARGETS -}; - -void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap); -void orion_setup_cpu_wins(void); -void orion_setup_eth_wins(void); -void orion_setup_usb_wins(void); -void orion_setup_pci_wins(void); -void orion_setup_pcie_wins(void); -void orion_setup_sata_wins(void); - -/* - * Shared code used internally by other Orion core functions. - * (/mach-orion/pci.c) - */ - -struct pci_sys_data; -struct pci_bus; - -void orion_pcie_id(u32 *dev, u32 *rev); -u32 orion_pcie_local_bus_nr(void); -u32 orion_pci_local_bus_nr(void); -u32 orion_pci_local_dev_nr(void); -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val); -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val); - -/* - * Valid GPIO pins according to MPP setup, used by machine-setup. - * (/mach-orion/gpio.c). - */ - -void __init orion_gpio_set_valid_pins(u32 pins); -void gpio_display(void); /* debug */ - -/* - * Orion system timer (clocksource + clockevnt, /mach-orion/time.c) - */ -extern struct sys_timer orion_timer; - -/* - * Pull in Orion Ethernet platform_data, used by machine-setup - */ - -struct mv643xx_eth_platform_data; - -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); - -/* - * Orion Sata platform_data, used by machine-setup - */ - -struct mv_sata_platform_data; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data); - -struct machine_desc; -struct meminfo; -struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); - -#endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c deleted file mode 100644 index b109bb46681e..000000000000 --- a/arch/arm/mach-orion/pci.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * arch/arm/mach-orion/pci.c - * - * PCI and PCIE functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/mach/pci.h> -#include "common.h" - -/***************************************************************************** - * Orion has one PCIE controller and one PCI controller. - * - * Note1: The local PCIE bus number is '0'. The local PCI bus number - * follows the scanned PCIE bridged busses, if any. - * - * Note2: It is possible for PCI/PCIE agents to access many subsystem's - * space, by configuring BARs and Address Decode Windows, e.g. flashes on - * device bus, Orion registers, etc. However this code only enable the - * access to DDR banks. - ****************************************************************************/ - - -/***************************************************************************** - * PCIE controller - ****************************************************************************/ -#define PCIE_CTRL ORION_PCIE_REG(0x1a00) -#define PCIE_STAT ORION_PCIE_REG(0x1a04) -#define PCIE_DEV_ID ORION_PCIE_REG(0x0000) -#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004) -#define PCIE_DEV_REV ORION_PCIE_REG(0x0008) -#define PCIE_MASK ORION_PCIE_REG(0x1910) -#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8) -#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc) - -/* - * PCIE_STAT bits - */ -#define PCIE_STAT_LINK_DOWN 1 -#define PCIE_STAT_BUS_OFFS 8 -#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS) -#define PCIE_STAT_DEV_OFFS 20 -#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS) - -/* - * PCIE_CONF_ADDR bits - */ -#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc)) -#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) -#define PCIE_CONF_ADDR_EN (1 << 31) - -/* - * PCIE config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pcie_lock); - -void orion_pcie_id(u32 *dev, u32 *rev) -{ - *dev = orion_read(PCIE_DEV_ID) >> 16; - *rev = orion_read(PCIE_DEV_REV) & 0xff; -} - -u32 orion_pcie_local_bus_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS); -} - -static u32 orion_pcie_local_dev_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS); -} - -static u32 orion_pcie_no_link(void) -{ - u32 stat = orion_read(PCIE_STAT); - return(stat & PCIE_STAT_LINK_DOWN); -} - -static void orion_pcie_set_bus_nr(int nr) -{ - orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK); - orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS); -} - -static void orion_pcie_master_slave_enable(void) -{ - orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY); -} - -static void orion_pcie_enable_interrupts(void) -{ - /* - * Enable interrupts lines - * INTA[24] INTB[25] INTC[26] INTD[27] - */ - orion_setbits(PCIE_MASK, 0xf<<24); -} - -static int orion_pcie_valid_config(u32 bus, u32 dev) -{ - /* - * Don't go out when trying to access -- - * 1. our own device - * 2. where there's no device connected (no link) - * 3. nonexisting devices on local bus - */ - - if ((orion_pcie_local_bus_nr() == bus) && - (orion_pcie_local_dev_nr() == dev)) - return 0; - - if (orion_pcie_no_link()) - return 0; - - if (bus == orion_pcie_local_bus_nr()) - if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) || - ((orion_pcie_local_dev_nr() != 0) && (dev != 0))) - return 0; - - return 1; -} - -static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - unsigned int dev, rev, pcie_addr; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&orion_pcie_lock, flags); - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { - /* extended register space */ - pcie_addr = ORION_PCIE_WA_VIRT_BASE; - pcie_addr |= PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where); - *val = orion_read(pcie_addr); - } else - *val = orion_read(PCIE_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - - -static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 val) -{ - unsigned long flags; - int ret; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&orion_pcie_lock, flags); - - ret = PCIBIOS_SUCCESSFUL; - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCIE_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCIE_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return ret; -} - -struct pci_ops orion_pcie_ops = { - .read = orion_pcie_rd_conf, - .write = orion_pcie_wr_conf, -}; - - -static int orion_pcie_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pcie_master_slave_enable(); - - /* - * Enable interrupts lines A-D - */ - orion_pcie_enable_interrupts(); - - /* - * Request resource - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI-EX I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIE IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI-EX Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIE Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - -/***************************************************************************** - * PCI controller - ****************************************************************************/ -#define PCI_MODE ORION_PCI_REG(0xd00) -#define PCI_CMD ORION_PCI_REG(0xc00) -#define PCI_P2P_CONF ORION_PCI_REG(0x1d14) -#define PCI_CONF_ADDR ORION_PCI_REG(0xc78) -#define PCI_CONF_DATA ORION_PCI_REG(0xc7c) - -/* - * PCI_MODE bits - */ -#define PCI_MODE_64BIT (1 << 2) -#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) - -/* - * PCI_CMD bits - */ -#define PCI_CMD_HOST_REORDER (1 << 29) - -/* - * PCI_P2P_CONF bits - */ -#define PCI_P2P_BUS_OFFS 16 -#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) -#define PCI_P2P_DEV_OFFS 24 -#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) - -/* - * PCI_CONF_ADDR bits - */ -#define PCI_CONF_REG(reg) ((reg) & 0xfc) -#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) -#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) -#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) -#define PCI_CONF_ADDR_EN (1 << 31) - -/* - * Internal configuration space - */ -#define PCI_CONF_FUNC_STAT_CMD 0 -#define PCI_CONF_REG_STAT_CMD 4 -#define PCIX_STAT 0x64 -#define PCIX_STAT_BUS_OFFS 8 -#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) - -/* - * PCI config cycles are done by programming the PCI_CONF_ADDR register - * and then reading the PCI_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pci_lock); - -u32 orion_pci_local_bus_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); -} - -u32 orion_pci_local_dev_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS); -} - -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 *val) -{ - unsigned long flags; - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - *val = orion_read(PCI_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 val) -{ - unsigned long flags; - int ret = PCIBIOS_SUCCESSFUL; - - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCI_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return ret; -} - -static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 *val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) - return PCIBIOS_DEVICE_NOT_FOUND; - - return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -struct pci_ops orion_pci_ops = { - .read = orion_pci_rd_conf, - .write = orion_pci_wr_conf, -}; - -static void orion_pci_set_bus_nr(int nr) -{ - u32 p2p = orion_read(PCI_P2P_CONF); - - if (orion_read(PCI_MODE) & PCI_MODE_PCIX) { - /* - * PCI-X mode - */ - u32 pcix_status, bus, dev; - bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; - dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; - orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); - pcix_status &= ~PCIX_STAT_BUS_MASK; - pcix_status |= (nr << PCIX_STAT_BUS_OFFS); - orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); - } else { - /* - * PCI Conventional mode - */ - p2p &= ~PCI_P2P_BUS_MASK; - p2p |= (nr << PCI_P2P_BUS_OFFS); - orion_write(PCI_P2P_CONF, p2p); - } -} - -static void orion_pci_master_slave_enable(void) -{ - u32 bus_nr, dev_nr, func, reg, val; - - bus_nr = orion_pci_local_bus_nr(); - dev_nr = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_STAT_CMD; - reg = PCI_CONF_REG_STAT_CMD; - orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val); - val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7); -} - -static int orion_pci_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pci_master_slave_enable(); - - /* - * Force ordering - */ - orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); - - /* - * Request resources - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCI Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - - -/***************************************************************************** - * General PCIE + PCI - ****************************************************************************/ -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) -{ - int ret = 0; - - if (nr == 0) { - /* - * PCIE setup - */ - orion_pcie_set_bus_nr(0); - ret = orion_pcie_setup(sys); - } else if (nr == 1) { - /* - * PCI setup - */ - ret = orion_pci_setup(sys); - } - - return ret; -} - -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_ops *ops; - struct pci_bus *bus; - - - if (nr == 0) { - u32 pci_bus; - /* - * PCIE scan - */ - ops = &orion_pcie_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - /* - * Set local PCI bus number to follow PCIE bridges (if any) - */ - pci_bus = bus->number + bus->subordinate - bus->secondary + 1; - orion_pci_set_bus_nr(pci_bus); - } else if (nr == 1) { - /* - * PCI scan - */ - ops = &orion_pci_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - } else { - BUG(); - bus = NULL; - } - - return bus; -} diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c deleted file mode 100644 index bd4262da4f40..000000000000 --- a/arch/arm/mach-orion/time.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/arm/mach-orion/time.c - * - * Core time functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/mach/time.h> -#include <asm/arch/orion.h> -#include "common.h" - -/* - * Timer0: clock_event_device, Tick. - * Timer1: clocksource, Free running. - * WatchDog: Not used. - * - * Timers are counting down. - */ -#define CLOCKEVENT 0 -#define CLOCKSOURCE 1 - -/* - * Timers bits - */ -#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1)) -#define TIMER_EN(x) (1 << ((x) * 2)) -#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1)) -#define BRIDGE_INT_TIMER_WD (1 << 3) -#define TIMER_WD_EN (1 << 4) -#define TIMER_WD_RELOAD_EN (1 << 5) - -static cycle_t orion_clksrc_read(void) -{ - return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE))); -} - -static struct clocksource orion_clksrc = { - .name = "orion_clocksource", - .shift = 20, - .rating = 300, - .read = orion_clksrc_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long flags; - - if (delta == 0) - return -ETIME; - - local_irq_save(flags); - - /* - * Clear and enable timer interrupt bit - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - - /* - * Setup new timer value - */ - orion_write(TIMER_VAL(CLOCKEVENT), delta); - - /* - * Disable auto reload and kickoff the timer - */ - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT)); - - local_irq_restore(flags); - - return 0; -} - -static void -orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - unsigned long flags; - - local_irq_save(flags); - - if (mode == CLOCK_EVT_MODE_PERIODIC) { - /* - * Setup latch cycles in timer and enable reload interrupt. - */ - orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH); - orion_write(TIMER_VAL(CLOCKEVENT), LATCH); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } else { - /* - * Disable timer and interrupt - */ - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } - - local_irq_restore(flags); -} - -static struct clock_event_device orion_clkevt = { - .name = "orion_tick", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .rating = 300, - .cpumask = CPU_MASK_CPU0, - .set_next_event = orion_clkevt_next_event, - .set_mode = orion_clkevt_mode, -}; - -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) -{ - /* - * Clear cause bit and do event - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clkevt.event_handler(&orion_clkevt); - return IRQ_HANDLED; -} - -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = orion_timer_interrupt -}; - -static void orion_timer_init(void) -{ - /* - * Setup clocksource free running timer (no interrupt on reload) - */ - orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff); - orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff); - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) | - TIMER_EN(CLOCKSOURCE)); - - /* - * Register clocksource - */ - orion_clksrc.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift); - - clocksource_register(&orion_clksrc); - - /* - * Connect and enable tick handler - */ - setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq); - - /* - * Register clockevent - */ - orion_clkevt.mult = - div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift); - orion_clkevt.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &orion_clkevt); - orion_clkevt.min_delta_ns = - clockevent_delta2ns(1, &orion_clkevt); - - clockevents_register_device(&orion_clkevt); -} - -struct sys_timer orion_timer = { - .init = orion_timer_init, -}; diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion5x/Kconfig index 1dcbb6ac5a30..93debf336155 100644 --- a/arch/arm/mach-orion/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,4 +1,4 @@ -if ARCH_ORION +if ARCH_ORION5X menu "Orion Implementations" @@ -36,6 +36,14 @@ config MACH_TS209 Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. +config MACH_LINKSTATION_PRO + bool "Buffalo Linkstation Pro/Live" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Pro/Live platform. Both v1 and + v2 devices are supported. + endmenu endif diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion5x/Makefile index f91d937a73e8..9301bf55910b 100644 --- a/arch/arm/mach-orion/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -1,6 +1,7 @@ -obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o +obj-y += common.o addr-map.o pci.o gpio.o irq.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot index 67039c3e0c48..67039c3e0c48 100644 --- a/arch/arm/mach-orion/Makefile.boot +++ b/arch/arm/mach-orion5x/Makefile.boot diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c new file mode 100644 index 000000000000..6b179371e0a2 --- /dev/null +++ b/arch/arm/mach-orion5x/addr-map.c @@ -0,0 +1,240 @@ +/* + * arch/arm/mach-orion5x/addr-map.c + * + * Address map functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include "common.h" + +/* + * The Orion has fully programable address map. There's a separate address + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, + * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own + * address decode windows that allow it to access any of the Orion resources. + * + * CPU address decoding -- + * Linux assumes that it is the boot loader that already setup the access to + * DDR and internal registers. + * Setup access to PCI and PCI-E IO/MEM space is issued by this file. + * Setup access to various devices located on the device bus interface (e.g. + * flashes, RTC, etc) should be issued by machine-setup.c according to + * specific board population (by using orion5x_setup_*_win()). + * + * Non-CPU Masters address decoding -- + * Unlike the CPU, we setup the access from Orion's master interfaces to DDR + * banks only (the typical use case). + * Setup access for each master to DDR is issued by common.c. + * + * Note: although orion_setbits() and orion_clrbits() are not atomic + * no locking is necessary here since code in this file is only called + * at boot time when there is no concurrency issues. + */ + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 +#define TARGET_PCI 3 +#define TARGET_PCIE 4 +#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ + ((n) == 1) ? 0xd : \ + ((n) == 2) ? 0xb : \ + ((n) == 3) ? 0x7 : 0xf) +#define ATTR_PCIE_MEM 0x59 +#define ATTR_PCIE_IO 0x51 +#define ATTR_PCIE_WA 0x79 +#define ATTR_PCI_MEM 0x59 +#define ATTR_PCI_IO 0x51 +#define ATTR_DEV_CS0 0x1e +#define ATTR_DEV_CS1 0x1d +#define ATTR_DEV_CS2 0x1b +#define ATTR_DEV_BOOT 0xf +#define WIN_EN 1 + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8)) +#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8)) +#define DDR_MAX_CS 4 +#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) +#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) +#define DDR_BANK_EN 1 + +/* + * CPU Address Decode Windows registers + */ +#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) +#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) +#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) +#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) + +/* + * Gigabit Ethernet Address Decode Windows registers + */ +#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8)) +#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8)) +#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4)) +#define ETH_WIN_EN ORION5X_ETH_REG(0x290) +#define ETH_WIN_PROT ORION5X_ETH_REG(0x294) +#define ETH_MAX_WIN 6 +#define ETH_MAX_REMAP_WIN 4 + + +struct mbus_dram_target_info orion5x_mbus_dram_info; + +static int __init orion5x_cpu_win_can_remap(int win) +{ + u32 dev, rev; + + orion5x_pcie_id(&dev, &rev); + if ((dev == MV88F5281_DEV_ID && win < 4) + || (dev == MV88F5182_DEV_ID && win < 2) + || (dev == MV88F5181_DEV_ID && win < 2)) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000); + orion5x_write(CPU_WIN_CTRL(win), + ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); + + if (orion5x_cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + + orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); + orion5x_write(CPU_WIN_REMAP_HI(win), 0); + } +} + +void __init orion5x_setup_cpu_mbus_bridge(void) +{ + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 8; i++) { + orion5x_write(CPU_WIN_BASE(i), 0); + orion5x_write(CPU_WIN_CTRL(i), 0); + if (orion5x_cpu_win_can_remap(i)) { + orion5x_write(CPU_WIN_REMAP_LO(i), 0); + orion5x_write(CPU_WIN_REMAP_HI(i), 0); + } + } + + /* + * Setup windows for PCI+PCIe IO+MEM space. + */ + setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); + setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); + setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1); + setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1); + + /* + * Setup MBUS dram target info. + */ + orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(DDR_BASE_CS(i)); + u32 size = readl(DDR_SIZE_CS(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &orion5x_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xff000000; + w->size = (size | 0x00ffffff) + 1; + } + } + orion5x_mbus_dram_info.num_cs = cs; +} + +void __init orion5x_setup_dev_boot_win(u32 base, u32 size) +{ + setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); +} + +void __init orion5x_setup_dev0_win(u32 base, u32 size) +{ + setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); +} + +void __init orion5x_setup_dev1_win(u32 base, u32 size) +{ + setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); +} + +void __init orion5x_setup_dev2_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); +} + +void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); +} + +void __init orion5x_setup_eth_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < ETH_MAX_WIN; i++) { + orion5x_write(ETH_WIN_BASE(i), 0); + orion5x_write(ETH_WIN_SIZE(i), 0); + orion5x_setbits(ETH_WIN_EN, 1 << i); + orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); + if (i < ETH_MAX_REMAP_WIN) + orion5x_write(ETH_WIN_REMAP(i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion5x_read(DDR_SIZE_CS(i)); + base = orion5x_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); + orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + TARGET_DDR); + orion5x_clrbits(ETH_WIN_EN, 1 << i); + orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); + } + } +} diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion5x/common.c index bbc2b4ec932c..439c7784af02 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/common.c + * arch/arm/mach-orion5x/common.c * - * Core functions for Marvell Orion System On Chip + * Core functions for Marvell Orion 5x SoCs * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -14,64 +14,71 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/mbus.h> #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> +#include <linux/ata_platform.h> #include <asm/page.h> #include <asm/setup.h> #include <asm/timex.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/arch/hardware.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/ehci-orion.h> +#include <asm/plat-orion/orion_nand.h> +#include <asm/plat-orion/time.h> #include "common.h" /***************************************************************************** * I/O Address Mapping ****************************************************************************/ -static struct map_desc orion_io_desc[] __initdata = { +static struct map_desc orion5x_io_desc[] __initdata = { { - .virtual = ORION_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), - .length = ORION_REGS_SIZE, + .virtual = ORION5X_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), + .length = ORION5X_REGS_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), - .length = ORION_PCIE_IO_SIZE, + .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), + .length = ORION5X_PCIE_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), - .length = ORION_PCI_IO_SIZE, + .virtual = ORION5X_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), + .length = ORION5X_PCI_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_WA_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), - .length = ORION_PCIE_WA_SIZE, + .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), + .length = ORION5X_PCIE_WA_SIZE, .type = MT_DEVICE }, }; -void __init orion_map_io(void) +void __init orion5x_map_io(void) { - iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc)); + iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); } /***************************************************************************** * UART ****************************************************************************/ -static struct resource orion_uart_resources[] = { +static struct resource orion5x_uart_resources[] = { { .start = UART0_PHYS_BASE, .end = UART0_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_UART0, - .end = IRQ_ORION_UART0, + .start = IRQ_ORION5X_UART0, + .end = IRQ_ORION5X_UART0, .flags = IORESOURCE_IRQ, }, { @@ -80,96 +87,102 @@ static struct resource orion_uart_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_UART1, - .end = IRQ_ORION_UART1, + .start = IRQ_ORION5X_UART1, + .end = IRQ_ORION5X_UART1, .flags = IORESOURCE_IRQ, }, }; -static struct plat_serial8250_port orion_uart_data[] = { +static struct plat_serial8250_port orion5x_uart_data[] = { { .mapbase = UART0_PHYS_BASE, .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_ORION_UART0, + .irq = IRQ_ORION5X_UART0, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = ORION_TCLK, + .uartclk = ORION5X_TCLK, }, { .mapbase = UART1_PHYS_BASE, .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_ORION_UART1, + .irq = IRQ_ORION5X_UART1, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = ORION_TCLK, + .uartclk = ORION5X_TCLK, }, { }, }; -static struct platform_device orion_uart = { +static struct platform_device orion5x_uart = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, .dev = { - .platform_data = orion_uart_data, + .platform_data = orion5x_uart_data, }, - .resource = orion_uart_resources, - .num_resources = ARRAY_SIZE(orion_uart_resources), + .resource = orion5x_uart_resources, + .num_resources = ARRAY_SIZE(orion5x_uart_resources), }; /******************************************************************************* * USB Controller - 2 interfaces ******************************************************************************/ -static struct resource orion_ehci0_resources[] = { +static struct resource orion5x_ehci0_resources[] = { { - .start = ORION_USB0_PHYS_BASE, - .end = ORION_USB0_PHYS_BASE + SZ_4K, + .start = ORION5X_USB0_PHYS_BASE, + .end = ORION5X_USB0_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_USB0_CTRL, - .end = IRQ_ORION_USB0_CTRL, + .start = IRQ_ORION5X_USB0_CTRL, + .end = IRQ_ORION5X_USB0_CTRL, .flags = IORESOURCE_IRQ, }, }; -static struct resource orion_ehci1_resources[] = { +static struct resource orion5x_ehci1_resources[] = { { - .start = ORION_USB1_PHYS_BASE, - .end = ORION_USB1_PHYS_BASE + SZ_4K, + .start = ORION5X_USB1_PHYS_BASE, + .end = ORION5X_USB1_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { - .start = IRQ_ORION_USB1_CTRL, - .end = IRQ_ORION_USB1_CTRL, + .start = IRQ_ORION5X_USB1_CTRL, + .end = IRQ_ORION5X_USB1_CTRL, .flags = IORESOURCE_IRQ, }, }; +static struct orion_ehci_data orion5x_ehci_data = { + .dram = &orion5x_mbus_dram_info, +}; + static u64 ehci_dmamask = 0xffffffffUL; -static struct platform_device orion_ehci0 = { +static struct platform_device orion5x_ehci0 = { .name = "orion-ehci", .id = 0, .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, }, - .resource = orion_ehci0_resources, - .num_resources = ARRAY_SIZE(orion_ehci0_resources), + .resource = orion5x_ehci0_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), }; -static struct platform_device orion_ehci1 = { +static struct platform_device orion5x_ehci1 = { .name = "orion-ehci", .id = 1, .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, }, - .resource = orion_ehci1_resources, - .num_resources = ARRAY_SIZE(orion_ehci1_resources), + .resource = orion5x_ehci1_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), }; /***************************************************************************** @@ -177,42 +190,42 @@ static struct platform_device orion_ehci1 = { * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) ****************************************************************************/ -static struct resource orion_eth_shared_resources[] = { +static struct resource orion5x_eth_shared_resources[] = { { - .start = ORION_ETH_PHYS_BASE + 0x2000, - .end = ORION_ETH_PHYS_BASE + 0x3fff, + .start = ORION5X_ETH_PHYS_BASE + 0x2000, + .end = ORION5X_ETH_PHYS_BASE + 0x3fff, .flags = IORESOURCE_MEM, }, }; -static struct platform_device orion_eth_shared = { +static struct platform_device orion5x_eth_shared = { .name = MV643XX_ETH_SHARED_NAME, .id = 0, .num_resources = 1, - .resource = orion_eth_shared_resources, + .resource = orion5x_eth_shared_resources, }; -static struct resource orion_eth_resources[] = { +static struct resource orion5x_eth_resources[] = { { .name = "eth irq", - .start = IRQ_ORION_ETH_SUM, - .end = IRQ_ORION_ETH_SUM, + .start = IRQ_ORION5X_ETH_SUM, + .end = IRQ_ORION5X_ETH_SUM, .flags = IORESOURCE_IRQ, } }; -static struct platform_device orion_eth = { +static struct platform_device orion5x_eth = { .name = MV643XX_ETH_NAME, .id = 0, .num_resources = 1, - .resource = orion_eth_resources, + .resource = orion5x_eth_resources, }; -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) +void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { - orion_eth.dev.platform_data = eth_data; - platform_device_register(&orion_eth_shared); - platform_device_register(&orion_eth); + orion5x_eth.dev.platform_data = eth_data; + platform_device_register(&orion5x_eth_shared); + platform_device_register(&orion5x_eth); } /***************************************************************************** @@ -220,13 +233,13 @@ void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) * (The Orion and Discovery (MV643xx) families share the same I2C controller) ****************************************************************************/ -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { +static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { .freq_m = 8, /* assumes 166 MHz TCLK */ .freq_n = 3, .timeout = 1000, /* Default timeout of 1 second */ }; -static struct resource orion_i2c_resources[] = { +static struct resource orion5x_i2c_resources[] = { { .name = "i2c base", .start = I2C_PHYS_BASE, @@ -235,66 +248,80 @@ static struct resource orion_i2c_resources[] = { }, { .name = "i2c irq", - .start = IRQ_ORION_I2C, - .end = IRQ_ORION_I2C, + .start = IRQ_ORION5X_I2C, + .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device orion_i2c = { +static struct platform_device orion5x_i2c = { .name = MV64XXX_I2C_CTLR_NAME, .id = 0, - .num_resources = ARRAY_SIZE(orion_i2c_resources), - .resource = orion_i2c_resources, + .num_resources = ARRAY_SIZE(orion5x_i2c_resources), + .resource = orion5x_i2c_resources, .dev = { - .platform_data = &orion_i2c_pdata, + .platform_data = &orion5x_i2c_pdata, }, }; /***************************************************************************** * Sata port ****************************************************************************/ -static struct resource orion_sata_resources[] = { +static struct resource orion5x_sata_resources[] = { { .name = "sata base", - .start = ORION_SATA_PHYS_BASE, - .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, + .start = ORION5X_SATA_PHYS_BASE, + .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1, .flags = IORESOURCE_MEM, }, { .name = "sata irq", - .start = IRQ_ORION_SATA, - .end = IRQ_ORION_SATA, + .start = IRQ_ORION5X_SATA, + .end = IRQ_ORION5X_SATA, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device orion_sata = { +static struct platform_device orion5x_sata = { .name = "sata_mv", .id = 0, .dev = { .coherent_dma_mask = 0xffffffff, }, - .num_resources = ARRAY_SIZE(orion_sata_resources), - .resource = orion_sata_resources, + .num_resources = ARRAY_SIZE(orion5x_sata_resources), + .resource = orion5x_sata_resources, }; -void __init orion_sata_init(struct mv_sata_platform_data *sata_data) +void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata.dev.platform_data = sata_data; - platform_device_register(&orion_sata); + sata_data->dram = &orion5x_mbus_dram_info; + orion5x_sata.dev.platform_data = sata_data; + platform_device_register(&orion5x_sata); } /***************************************************************************** + * Time handling + ****************************************************************************/ + +static void orion5x_timer_init(void) +{ + orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK); +} + +struct sys_timer orion5x_timer = { + .init = orion5x_timer_init, +}; + +/***************************************************************************** * General ****************************************************************************/ /* * Identify device ID and rev from PCIE configuration header space '0'. */ -static void orion_id(u32 *dev, u32 *rev, char **dev_name) +static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { - orion_pcie_id(dev, rev); + orion5x_pcie_id(dev, rev); if (*dev == MV88F5281_DEV_ID) { if (*rev == MV88F5281_REV_D2) { @@ -321,33 +348,28 @@ static void orion_id(u32 *dev, u32 *rev, char **dev_name) } } -void __init orion_init(void) +void __init orion5x_init(void) { char *dev_name; u32 dev, rev; - orion_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK); + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK); /* * Setup Orion address map */ - orion_setup_cpu_wins(); - orion_setup_usb_wins(); - orion_setup_eth_wins(); - orion_setup_pci_wins(); - orion_setup_pcie_wins(); - if (dev == MV88F5182_DEV_ID) - orion_setup_sata_wins(); + orion5x_setup_cpu_mbus_bridge(); + orion5x_setup_eth_wins(); /* - * REgister devices + * Register devices. */ - platform_device_register(&orion_uart); - platform_device_register(&orion_ehci0); + platform_device_register(&orion5x_uart); + platform_device_register(&orion5x_ehci0); if (dev == MV88F5182_DEV_ID) - platform_device_register(&orion_ehci1); - platform_device_register(&orion_i2c); + platform_device_register(&orion5x_ehci1); + platform_device_register(&orion5x_i2c); } /* diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h new file mode 100644 index 000000000000..f4c4c9a72a7c --- /dev/null +++ b/arch/arm/mach-orion5x/common.h @@ -0,0 +1,72 @@ +#ifndef __ARCH_ORION5X_COMMON_H +#define __ARCH_ORION5X_COMMON_H + +/* + * Basic Orion init functions used early by machine-setup. + */ + +void orion5x_map_io(void); +void orion5x_init_irq(void); +void orion5x_init(void); +extern struct sys_timer orion5x_timer; + +/* + * Enumerations and functions for Orion windows mapping. Used by Orion core + * functions to map its interfaces and by the machine-setup to map its on- + * board devices. Details in /mach-orion/addr-map.c + */ +extern struct mbus_dram_target_info orion5x_mbus_dram_info; +void orion5x_setup_cpu_mbus_bridge(void); +void orion5x_setup_dev_boot_win(u32 base, u32 size); +void orion5x_setup_dev0_win(u32 base, u32 size); +void orion5x_setup_dev1_win(u32 base, u32 size); +void orion5x_setup_dev2_win(u32 base, u32 size); +void orion5x_setup_pcie_wa_win(u32 base, u32 size); +void orion5x_setup_eth_wins(void); + +/* + * Shared code used internally by other Orion core functions. + * (/mach-orion/pci.c) + */ + +struct pci_sys_data; +struct pci_bus; + +void orion5x_pcie_id(u32 *dev, u32 *rev); +int orion5x_pcie_local_bus_nr(void); +int orion5x_pci_local_bus_nr(void); +int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); + +/* + * Valid GPIO pins according to MPP setup, used by machine-setup. + * (/mach-orion/gpio.c). + */ + +void orion5x_gpio_set_valid_pins(u32 pins); +void gpio_display(void); /* debug */ + +/* + * Pull in Orion Ethernet platform_data, used by machine-setup + */ + +struct mv643xx_eth_platform_data; + +void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); + +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void orion5x_sata_init(struct mv_sata_platform_data *sata_data); + +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + + +#endif diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 5ef44e1a2d36..872aed372327 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/db88f5281-setup.c + * arch/arm/mach-orion5x/db88f5281-setup.c * * Marvell Orion-2 Development Board Setup * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -24,8 +24,8 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> #include "common.h" /***************************************************************************** @@ -244,8 +244,8 @@ static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCIE IRQ is connected internally (not GPIO) */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; /* * PCI IRQs are connected via GPIOs @@ -265,8 +265,8 @@ static struct hw_pci db88f5281_pci __initdata = { .nr_controllers = 2, .preinit = db88f5281_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = db88f5281_pci_map_irq, }; @@ -312,19 +312,16 @@ static void __init db88f5281_init(void) /* * Basic Orion setup. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our on-board devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE, - DB88F5281_NOR_SIZE, -1); - orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE, - DB88F5281_NAND_SIZE, -1); + orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); + orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); + orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); /* * Setup Multiplexing Pins: @@ -340,25 +337,25 @@ static void __init db88f5281_init(void) * MPP18: UART1_CTS MPP19: UART1_RTS * MPP-DEV: DEV_D[16:31] */ - orion_write(MPP_0_7_CTRL, 0x00222203); - orion_write(MPP_8_15_CTRL, 0x44000000); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); + orion5x_write(MPP_0_7_CTRL, 0x00222203); + orion5x_write(MPP_8_15_CTRL, 0x44000000); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); - orion_gpio_set_valid_pins(0x00003fc3); + orion5x_gpio_set_valid_pins(0x00003fc3); platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); - orion_eth_init(&db88f5281_eth_data); + orion5x_eth_init(&db88f5281_eth_data); } MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f5281_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 076e155ad510..d67790ef236e 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-orion/dns323-setup.c + * arch/arm/mach-orion5x/dns323-setup.c * * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> * @@ -25,8 +25,7 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" #define DNS323_GPIO_LED_RIGHT_AMBER 1 @@ -45,8 +44,8 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { /* PCI-E */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; pr_err("%s: requested mapping for unknown bus\n", __func__); @@ -56,8 +55,8 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) static struct hw_pci dns323_pci __initdata = { .nr_controllers = 1, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = dns323_pci_map_irq, }; @@ -247,27 +246,25 @@ static void dns323_power_off(void) static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ - orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE, - DNS323_NOR_BOOT_SIZE, -1); + orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE * * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, - (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ - orion_write(MPP_0_7_CTRL, 0); - orion_write(MPP_8_15_CTRL, 0); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); + orion5x_write(MPP_0_7_CTRL, 0); + orion5x_write(MPP_8_15_CTRL, 0); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); /* Define used GPIO pins @@ -290,7 +287,7 @@ static void __init dns323_init(void) | 14 | Out | //unknown// | 15 | Out | //unknown// */ - orion_gpio_set_valid_pins(0x07f6); + orion5x_gpio_set_valid_pins(0x07f6); /* register dns323 specific power-off method */ if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) @@ -306,18 +303,18 @@ static void __init dns323_init(void) i2c_register_board_info(0, dns323_i2c_devices, ARRAY_SIZE(dns323_i2c_devices)); - orion_eth_init(&dns323_eth_data); + orion5x_eth_init(&dns323_eth_data); } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = dns323_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion5x/gpio.c index f713818c66a3..8108c316c426 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion5x/gpio.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/gpio.c + * arch/arm/mach-orion5x/gpio.c * * GPIO functions for Marvell Orion System On Chip * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -16,14 +16,15 @@ #include <linux/spinlock.h> #include <linux/bitops.h> #include <asm/gpio.h> -#include <asm/arch/orion.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> #include "common.h" static DEFINE_SPINLOCK(gpio_lock); static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ -void __init orion_gpio_set_valid_pins(u32 pins) +void __init orion5x_gpio_set_valid_pins(u32 pins) { gpio_valid[0] = pins; } @@ -49,7 +50,7 @@ int gpio_direction_input(unsigned pin) if (!gpio_label[pin]) gpio_label[pin] = "?"; - orion_setbits(GPIO_IO_CONF, 1 << pin); + orion5x_setbits(GPIO_IO_CONF, 1 << pin); spin_unlock_irqrestore(&gpio_lock, flags); return 0; @@ -76,12 +77,12 @@ int gpio_direction_output(unsigned pin, int value) gpio_label[pin] = "?"; mask = 1 << pin; - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); if (value) - orion_setbits(GPIO_OUT, mask); + orion5x_setbits(GPIO_OUT, mask); else - orion_clrbits(GPIO_OUT, mask); - orion_clrbits(GPIO_IO_CONF, mask); + orion5x_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_IO_CONF, mask); spin_unlock_irqrestore(&gpio_lock, flags); return 0; @@ -92,10 +93,10 @@ int gpio_get_value(unsigned pin) { int val, mask = 1 << pin; - if (orion_read(GPIO_IO_CONF) & mask) - val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL); + if (orion5x_read(GPIO_IO_CONF) & mask) + val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL); else - val = orion_read(GPIO_OUT); + val = orion5x_read(GPIO_OUT); return val & mask; } @@ -108,32 +109,32 @@ void gpio_set_value(unsigned pin, int value) spin_lock_irqsave(&gpio_lock, flags); - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); if (value) - orion_setbits(GPIO_OUT, mask); + orion5x_setbits(GPIO_OUT, mask); else - orion_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_OUT, mask); spin_unlock_irqrestore(&gpio_lock, flags); } EXPORT_SYMBOL(gpio_set_value); -void orion_gpio_set_blink(unsigned pin, int blink) +void orion5x_gpio_set_blink(unsigned pin, int blink) { unsigned long flags; int mask = 1 << pin; spin_lock_irqsave(&gpio_lock, flags); - orion_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_OUT, mask); if (blink) - orion_setbits(GPIO_BLINK_EN, mask); + orion5x_setbits(GPIO_BLINK_EN, mask); else - orion_clrbits(GPIO_BLINK_EN, mask); + orion5x_clrbits(GPIO_BLINK_EN, mask); spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(orion_gpio_set_blink); +EXPORT_SYMBOL(orion5x_gpio_set_blink); int gpio_request(unsigned pin, const char *label) { @@ -187,39 +188,39 @@ void gpio_display(void) printk("GPIO, free\n"); } else { printk("GPIO, used by %s, ", gpio_label[i]); - if (orion_read(GPIO_IO_CONF) & (1 << i)) { + if (orion5x_read(GPIO_IO_CONF) & (1 << i)) { printk("input, active %s, level %s, edge %s\n", - ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", - ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", - ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); + ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", + ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", + ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); } else { - printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1); + printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1); } } } printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", - MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL)); + MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL)); printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", - MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL)); + MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL)); printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", - MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL)); + MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL)); printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", - MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL)); + MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL)); printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", - GPIO_OUT, orion_read(GPIO_OUT)); + GPIO_OUT, orion5x_read(GPIO_OUT)); printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", - GPIO_IO_CONF, orion_read(GPIO_IO_CONF)); + GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF)); printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", - GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN)); + GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN)); printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", - GPIO_IN_POL, orion_read(GPIO_IN_POL)); + GPIO_IN_POL, orion5x_read(GPIO_IN_POL)); printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", - GPIO_DATA_IN, orion_read(GPIO_DATA_IN)); + GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN)); printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", - GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK)); + GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK)); printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", - GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE)); + GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE)); printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", - GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK)); + GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK)); } diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion5x/irq.c index df7e12ad378b..dd21f38c5d37 100644 --- a/arch/arm/mach-orion/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/irq.c + * arch/arm/mach-orion5x/irq.c * * Core IRQ functions for Marvell Orion System On Chip * * Maintainer: Tzachi Perelstein <tzachi@marvell.com> * * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -14,7 +14,9 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/gpio.h> -#include <asm/arch/orion.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/irq.h> #include "common.h" /***************************************************************************** @@ -42,46 +44,46 @@ * polarity LEVEL mask * ****************************************************************************/ -static void orion_gpio_irq_ack(u32 irq) +static void orion5x_gpio_irq_ack(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) /* * Mask bit for level interrupt */ - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); else /* * Clear casue bit for egde interrupt */ - orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin); + orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin); } -static void orion_gpio_irq_mask(u32 irq) +static void orion5x_gpio_irq_mask(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); else - orion_clrbits(GPIO_EDGE_MASK, 1 << pin); + orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin); } -static void orion_gpio_irq_unmask(u32 irq) +static void orion5x_gpio_irq_unmask(u32 irq) { int pin = irq_to_gpio(irq); if (irq_desc[irq].status & IRQ_LEVEL) - orion_setbits(GPIO_LEVEL_MASK, 1 << pin); + orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin); else - orion_setbits(GPIO_EDGE_MASK, 1 << pin); + orion5x_setbits(GPIO_EDGE_MASK, 1 << pin); } -static int orion_gpio_set_irq_type(u32 irq, u32 type) +static int orion5x_gpio_set_irq_type(u32 irq, u32 type) { int pin = irq_to_gpio(irq); struct irq_desc *desc; - if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) { - printk(KERN_ERR "orion_gpio_set_irq_type failed " + if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) { + printk(KERN_ERR "orion5x_gpio_set_irq_type failed " "(irq %d, pin %d).\n", irq, pin); return -EINVAL; } @@ -92,22 +94,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) case IRQT_HIGH: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_LOW: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); + orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_RISING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_FALLING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); + orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; case IRQT_BOTHEDGE: desc->handle_irq = handle_edge_irq; @@ -115,11 +117,11 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) /* * set initial polarity based on current input level */ - if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN)) + if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN)) & (1 << pin)) - orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ + orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ else - orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ break; default: @@ -133,22 +135,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type) return 0; } -static struct irq_chip orion_gpio_irq_chip = { +static struct irq_chip orion5x_gpio_irq_chip = { .name = "Orion-IRQ-GPIO", - .ack = orion_gpio_irq_ack, - .mask = orion_gpio_irq_mask, - .unmask = orion_gpio_irq_unmask, - .set_type = orion_gpio_set_irq_type, + .ack = orion5x_gpio_irq_ack, + .mask = orion5x_gpio_irq_mask, + .unmask = orion5x_gpio_irq_unmask, + .set_type = orion5x_gpio_set_irq_type, }; -static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { u32 cause, offs, pin; - BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31); - offs = (irq - IRQ_ORION_GPIO_0_7) * 8; - cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) | - (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK)); + BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); + offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8; + cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) | + (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK)); for (pin = offs; pin < offs + 8; pin++) { if (cause & (1 << pin)) { @@ -156,16 +158,16 @@ static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) desc = irq_desc + irq; if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { /* Swap polarity (race with GPIO line) */ - u32 polarity = orion_read(GPIO_IN_POL); + u32 polarity = orion5x_read(GPIO_IN_POL); polarity ^= 1 << pin; - orion_write(GPIO_IN_POL, polarity); + orion5x_write(GPIO_IN_POL, polarity); } desc_handle_irq(irq, desc); } } } -static void __init orion_init_gpio_irq(void) +static void __init orion5x_init_gpio_irq(void) { int i; struct irq_desc *desc; @@ -173,69 +175,37 @@ static void __init orion_init_gpio_irq(void) /* * Mask and clear GPIO IRQ interrupts */ - orion_write(GPIO_LEVEL_MASK, 0x0); - orion_write(GPIO_EDGE_MASK, 0x0); - orion_write(GPIO_EDGE_CAUSE, 0x0); + orion5x_write(GPIO_LEVEL_MASK, 0x0); + orion5x_write(GPIO_EDGE_MASK, 0x0); + orion5x_write(GPIO_EDGE_CAUSE, 0x0); /* * Register chained level handlers for GPIO IRQs by default. * User can use set_type() if he wants to use edge types handlers. */ - for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); + for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { + set_irq_chip(i, &orion5x_gpio_irq_chip); set_irq_handler(i, handle_level_irq); desc = irq_desc + i; desc->status |= IRQ_LEVEL; set_irq_flags(i, IRQF_VALID); } - set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler); } /***************************************************************************** * Orion Main IRQ ****************************************************************************/ -static void orion_main_irq_mask(u32 irq) +static void __init orion5x_init_main_irq(void) { - orion_clrbits(MAIN_IRQ_MASK, 1 << irq); + orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); } -static void orion_main_irq_unmask(u32 irq) +void __init orion5x_init_irq(void) { - orion_setbits(MAIN_IRQ_MASK, 1 << irq); -} - -static struct irq_chip orion_main_irq_chip = { - .name = "Orion-IRQ-Main", - .ack = orion_main_irq_mask, - .mask = orion_main_irq_mask, - .unmask = orion_main_irq_unmask, -}; - -static void __init orion_init_main_irq(void) -{ - int i; - - /* - * Mask and clear Main IRQ interrupts - */ - orion_write(MAIN_IRQ_MASK, 0x0); - orion_write(MAIN_IRQ_CAUSE, 0x0); - - /* - * Register level handler for Main IRQs - */ - for (i = 0; i < IRQ_ORION_GPIO_START; i++) { - set_irq_chip(i, &orion_main_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } -} - -void __init orion_init_irq(void) -{ - orion_init_main_irq(); - orion_init_gpio_irq(); + orion5x_init_main_irq(); + orion5x_init_gpio_irq(); } diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 785a07bdf1e2..91413455beba 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -1,10 +1,10 @@ /* - * arch/arm/mach-orion/kurobox_pro-setup.c + * arch/arm/mach-orion5x/kurobox_pro-setup.c * * Maintainer: Ronen Shitrit <rshitrit@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -22,8 +22,8 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> #include "common.h" /***************************************************************************** @@ -123,8 +123,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCI isn't used on the Kuro */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; else printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); @@ -134,8 +134,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) static struct hw_pci kurobox_pro_pci __initdata = { .nr_controllers = 1, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = kurobox_pro_pci_map_irq, }; @@ -178,31 +178,25 @@ static struct mv_sata_platform_data kurobox_pro_sata_data = { * General Setup ****************************************************************************/ -static struct platform_device *kurobox_pro_devices[] __initdata = { - &kurobox_pro_nor_flash, - &kurobox_pro_nand_flash, -}; - static void __init kurobox_pro_init(void) { /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE, -1); + orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); + /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -219,26 +213,44 @@ static void __init kurobox_pro_init(void) * MPP[15] SATA 1 active indication * MPP[16-19] Not used */ - orion_write(MPP_0_7_CTRL, 0x44220003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x0); + orion5x_write(MPP_0_7_CTRL, 0x44220003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x0); - orion_gpio_set_valid_pins(0x0000000c); + orion5x_gpio_set_valid_pins(0x0000000c); - platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); + platform_device_register(&kurobox_pro_nor_flash); + if (machine_is_kurobox_pro()) + platform_device_register(&kurobox_pro_nand_flash); i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); - orion_eth_init(&kurobox_pro_eth_data); - orion_sata_init(&kurobox_pro_sata_data); + orion5x_eth_init(&kurobox_pro_eth_data); + orion5x_sata_init(&kurobox_pro_sata_data); } +#ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_LINKSTATION_PRO +MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") + /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END +#endif diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c new file mode 100644 index 000000000000..fdf99fca85b3 --- /dev/null +++ b/arch/arm/mach-orion5x/pci.c @@ -0,0 +1,559 @@ +/* + * arch/arm/mach-orion5x/pci.c + * + * PCI and PCIe functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/plat-orion/pcie.h> +#include "common.h" + +/***************************************************************************** + * Orion has one PCIe controller and one PCI controller. + * + * Note1: The local PCIe bus number is '0'. The local PCI bus number + * follows the scanned PCIe bridged busses, if any. + * + * Note2: It is possible for PCI/PCIe agents to access many subsystem's + * space, by configuring BARs and Address Decode Windows, e.g. flashes on + * device bus, Orion registers, etc. However this code only enable the + * access to DDR banks. + ****************************************************************************/ + + +/***************************************************************************** + * PCIe controller + ****************************************************************************/ +#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) + +void __init orion5x_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id(PCIE_BASE); + *rev = orion_pcie_rev(PCIE_BASE); +} + +int __init orion5x_pcie_local_bus_nr(void) +{ + return orion_pcie_get_local_bus_nr(PCIE_BASE); +} + +static int pcie_valid_config(int bus, int dev) +{ + /* + * Don't go out when trying to access -- + * 1. nonexisting device on local bus + * 2. where there's no device connected (no link) + */ + if (bus == 0 && dev == 0) + return 1; + + if (!orion_pcie_link_up(PCIE_BASE)) + return 0; + + if (bus == 0 && dev != 1) + return 0; + + return 1; +} + + +/* + * PCIe config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pcie_lock); + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * We only support access to the non-extended configuration + * space when using the WA access method (or we would have to + * sacrifice 256M of CPU virtual address space.) + */ + if (where >= 0x100) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + bus, devfn, where, size, val); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + + +static int __init pcie_setup(struct pci_sys_data *sys) +{ + struct resource *res; + int dev; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + + /* + * Check whether to apply Orion-1/Orion-NAS PCIe config + * read transaction workaround. + */ + dev = orion_pcie_dev_id(PCIE_BASE); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " + "read transaction workaround\n"); + pcie_ops.read = pcie_rd_conf_wa; + } + + /* + * Request resources. + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pcie_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCIe I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCIE_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCIe Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + +/***************************************************************************** + * PCI controller + ****************************************************************************/ +#define PCI_MODE ORION5X_PCI_REG(0xd00) +#define PCI_CMD ORION5X_PCI_REG(0xc00) +#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) +#define PCI_CONF_ADDR ORION5X_PCI_REG(0xc78) +#define PCI_CONF_DATA ORION5X_PCI_REG(0xc7c) + +/* + * PCI_MODE bits + */ +#define PCI_MODE_64BIT (1 << 2) +#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) + +/* + * PCI_CMD bits + */ +#define PCI_CMD_HOST_REORDER (1 << 29) + +/* + * PCI_P2P_CONF bits + */ +#define PCI_P2P_BUS_OFFS 16 +#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) +#define PCI_P2P_DEV_OFFS 24 +#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) + +/* + * PCI_CONF_ADDR bits + */ +#define PCI_CONF_REG(reg) ((reg) & 0xfc) +#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) +#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) +#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) +#define PCI_CONF_ADDR_EN (1 << 31) + +/* + * Internal configuration space + */ +#define PCI_CONF_FUNC_STAT_CMD 0 +#define PCI_CONF_REG_STAT_CMD 4 +#define PCIX_STAT 0x64 +#define PCIX_STAT_BUS_OFFS 8 +#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) + +/* + * PCI Address Decode Windows registers + */ +#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0) +#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0) +#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c) +#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c) + +/* + * PCI configuration helpers for BAR settings + */ +#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) +#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) +#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) + +/* + * PCI config cycles are done by programming the PCI_CONF_ADDR register + * and then reading the PCI_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pci_lock); + +int orion5x_pci_local_bus_nr(void) +{ + u32 conf = orion5x_read(PCI_P2P_CONF); + return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); +} + +static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 *val) +{ + unsigned long flags; + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + *val = orion5x_read(PCI_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 val) +{ + unsigned long flags; + int ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCI_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return ret; +} + +static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + /* + * Don't go out for local device + */ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static struct pci_ops pci_ops = { + .read = orion5x_pci_rd_conf, + .write = orion5x_pci_wr_conf, +}; + +static void __init orion5x_pci_set_bus_nr(int nr) +{ + u32 p2p = orion5x_read(PCI_P2P_CONF); + + if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) { + /* + * PCI-X mode + */ + u32 pcix_status, bus, dev; + bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; + dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; + orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); + pcix_status &= ~PCIX_STAT_BUS_MASK; + pcix_status |= (nr << PCIX_STAT_BUS_OFFS); + orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); + } else { + /* + * PCI Conventional mode + */ + p2p &= ~PCI_P2P_BUS_MASK; + p2p |= (nr << PCI_P2P_BUS_OFFS); + orion5x_write(PCI_P2P_CONF, p2p); + } +} + +static void __init orion5x_pci_master_slave_enable(void) +{ + int bus_nr, func, reg; + u32 val; + + bus_nr = orion5x_pci_local_bus_nr(); + func = PCI_CONF_FUNC_STAT_CMD; + reg = PCI_CONF_REG_STAT_CMD; + orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val); + val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); +} + +static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +{ + u32 win_enable; + int bus; + int i; + + /* + * First, disable windows. + */ + win_enable = 0xffffffff; + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Setup windows for DDR banks. + */ + bus = orion5x_pci_local_bus_nr(); + + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); + u32 reg; + u32 val; + + /* + * Write DRAM bank base address register. + */ + reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index); + orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val); + val = (cs->base & 0xfffff000) | (val & 0xfff); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val); + + /* + * Write DRAM bank size register. + */ + reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); + orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index), + (cs->size - 1) & 0xfffff000); + orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index), + cs->base & 0xfffff000); + + /* + * Enable decode window for this chip select. + */ + win_enable &= ~(1 << cs->cs_index); + } + + /* + * Re-enable decode windows. + */ + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Disable automatic update of address remaping when writing to BARs. + */ + orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); +} + +static int __init pci_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Point PCI unit MBUS decode windows to DRAM space. + */ + orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + + /* + * Master + Slave enable + */ + orion5x_pci_master_slave_enable(); + + /* + * Force ordering + */ + orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + + /* + * Request resources + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCI_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCI IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCI_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCI Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + + +/***************************************************************************** + * General PCIe + PCI + ****************************************************************************/ +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); + ret = pcie_setup(sys); + } else if (nr == 1) { + orion5x_pci_set_bus_nr(sys->busnr); + ret = pci_setup(sys); + } + + return ret; +} + +struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr == 0) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else if (nr == 1) { + bus = pci_scan_bus(sys->busnr, &pci_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index e851b8ca5ac6..37e8b2dc3ed5 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -1,12 +1,12 @@ /* - * arch/arm/mach-orion/rd88f5182-setup.c + * arch/arm/mach-orion5x/rd88f5182-setup.c * * Marvell Orion-NAS Reference Design Setup * * Maintainer: Ronen Shitrit <rshitrit@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -24,8 +24,7 @@ #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" /***************************************************************************** @@ -176,8 +175,8 @@ static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCI-E isn't used on the RD2 */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; /* * PCI IRQs are connected via GPIOs @@ -197,8 +196,8 @@ static struct hw_pci rd88f5182_pci __initdata = { .nr_controllers = 2, .preinit = rd88f5182_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5182_pci_map_irq, }; @@ -250,22 +249,20 @@ static void __init rd88f5182_init(void) /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup the CPU address decode windows for our devices */ - orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE, - RD88F5182_NOR_SIZE, -1); + orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -291,25 +288,25 @@ static void __init rd88f5182_init(void) * MPP[25] USB 0 over current enable */ - orion_write(MPP_0_7_CTRL, 0x00000003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5555); + orion5x_write(MPP_0_7_CTRL, 0x00000003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5555); - orion_gpio_set_valid_pins(0x000000fb); + orion5x_gpio_set_valid_pins(0x000000fb); platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); - orion_eth_init(&rd88f5182_eth_data); - orion_sata_init(&rd88f5182_sata_data); + orion5x_eth_init(&rd88f5182_eth_data); + orion5x_sata_init(&rd88f5182_sata_data); } MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, MACHINE_END diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 45764dad16d0..fd43863a86f6 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -26,8 +26,7 @@ #include <asm/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> +#include <asm/arch/orion5x.h> #include "common.h" #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 @@ -145,8 +144,8 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCIE IRQ is connected internally (not GPIO) */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; /* * PCI IRQs are connected via GPIOs @@ -165,8 +164,8 @@ static struct hw_pci qnap_ts209_pci __initdata = { .nr_controllers = 2, .preinit = qnap_ts209_pci_preinit, .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, .map_irq = qnap_ts209_pci_map_irq, }; @@ -189,6 +188,87 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { .force_phy_addr = 1, }; +static int __init parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = parse_hex_nibble(b[0]); + lo = parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init check_mac_addr(const char *addr_str) +{ + u_int8_t addr[6]; + int i; + + for (i = 0; i < 6; i++) { + int byte; + + /* + * Enforce "xx:xx:xx:xx:xx:xx\n" format. + */ + if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) + return -1; + + byte = parse_hex_byte(addr_str + (i * 3)); + if (byte < 0) + return -1; + addr[i] = byte; + } + + printk(KERN_INFO "ts209: found ethernet mac address "); + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(qnap_ts209_eth_data.mac_addr, addr, 6); + + return 0; +} + +/* + * The 'NAS Config' flash partition has an ext2 filesystem which + * contains a file that has the ethernet MAC address in plain text + * (format "xx:xx:xx:xx:xx:xx\n".) + */ +static void __init ts209_find_mac_addr(void) +{ + unsigned long addr; + + for (addr = 0x00700000; addr < 0x00760000; addr += 1024) { + char *nor_page; + int ret = 0; + + nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024); + if (nor_page != NULL) { + ret = check_mac_addr(nor_page); + iounmap(nor_page); + } + + if (ret == 0) + break; + } +} + /***************************************************************************** * RTC S35390A on I2C bus ****************************************************************************/ @@ -262,21 +342,21 @@ static struct platform_device *qnap_ts209_devices[] __initdata = { static void qnap_ts209_power_off(void) { /* 19200 baud divisor */ - const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); + const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200)); pr_info("%s: triggering power-off...\n", __func__); /* hijack uart1 and reset into sane state (19200,8n1) */ - orion_write(UART1_REG(LCR), 0x83); - orion_write(UART1_REG(DLL), divisor & 0xff); - orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); - orion_write(UART1_REG(LCR), 0x03); - orion_write(UART1_REG(IER), 0x00); - orion_write(UART1_REG(FCR), 0x00); - orion_write(UART1_REG(MCR), 0x00); + orion5x_write(UART1_REG(LCR), 0x83); + orion5x_write(UART1_REG(DLL), divisor & 0xff); + orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion5x_write(UART1_REG(LCR), 0x03); + orion5x_write(UART1_REG(IER), 0x00); + orion5x_write(UART1_REG(FCR), 0x00); + orion5x_write(UART1_REG(MCR), 0x00); /* send the power-off command 'A' to PIC */ - orion_write(UART1_REG(TX), 'A'); + orion5x_write(UART1_REG(TX), 'A'); } static void __init qnap_ts209_init(void) @@ -284,20 +364,19 @@ static void __init qnap_ts209_init(void) /* * Setup basic Orion functions. Need to be called early. */ - orion_init(); + orion5x_init(); /* * Setup flash mapping */ - orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE, -1); + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- @@ -322,10 +401,10 @@ static void __init qnap_ts209_init(void) * MPP[22] USB 0 over current * MPP[23-25] Reserved */ - orion_write(MPP_0_7_CTRL, 0x3); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5500); - orion_gpio_set_valid_pins(0x3cc0fff); + orion5x_write(MPP_0_7_CTRL, 0x3); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5500); + orion5x_gpio_set_valid_pins(0x3cc0fff); /* register ts209 specific power-off method */ pm_power_off = qnap_ts209_power_off; @@ -344,18 +423,20 @@ static void __init qnap_ts209_init(void) pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - orion_eth_init(&qnap_ts209_eth_data); - orion_sata_init(&qnap_ts209_sata_data); + ts209_find_mac_addr(); + orion5x_eth_init(&qnap_ts209_eth_data); + + orion5x_sata_init(&qnap_ts209_sata_data); } MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts209_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 0908bea0f609..5da7a6820492 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -23,6 +23,12 @@ endif choice prompt "Select target board" +config ARCH_GUMSTIX + bool "Gumstix XScale boards" + help + Say Y here if you intend to run this kernel on a + Gumstix Full Function Minature Computer. + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -160,6 +166,20 @@ endchoice endif +if ARCH_GUMSTIX + +choice + prompt "Select target Gumstix board" + +config MACH_GUMSTIX_F + bool "Basix, Connex, ws-200ax, ws-400ax systems" + select PXA25x + +endchoice + +endif + + if MACH_TRIZEPS4 choice diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 6e0c4f5b5ae6..7cdcb459ea9d 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -5,13 +5,14 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ time.o gpio.o -obj-$(CONFIG_PXA25x) += pxa25x.o -obj-$(CONFIG_PXA27x) += pxa27x.o -obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o smemc.o +obj-$(CONFIG_PXA25x) += pxa25x.o mfp-pxa2xx.o +obj-$(CONFIG_PXA27x) += pxa27x.o mfp-pxa2xx.o +obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp-pxa3xx.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o # Specific board support +obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index df5ae2710ab1..e97dc59813c8 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -13,6 +13,7 @@ #include <linux/delay.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/hardware.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index fcda7d5cb693..ac7f05f9f3eb 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -23,6 +23,7 @@ #include <asm/mach/pci.h> #include <asm/arch/cm-x270.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index ecdbc96a4de1..6d4416a4f378 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -30,6 +30,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index 6db54e31c397..43bf5a183e90 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -29,6 +29,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/colibri.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9292576b83b3..259ca821e464 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 392c38717362..0a85f706e887 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -26,6 +26,7 @@ #include <asm/arch/sharpsl.h> #include <asm/arch/corgi.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 31706224a04c..eccc45d21f75 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -21,6 +21,7 @@ #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/regs-ssp.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index bfccb80ac8ef..d6c05b6eab35 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -11,6 +11,8 @@ #include <asm/arch/irda.h> #include <asm/arch/i2c.h> #include <asm/arch/ohci.h> +#include <asm/arch/pxa27x_keypad.h> +#include <asm/arch/camera.h> #include "devices.h" @@ -396,6 +398,31 @@ struct platform_device pxa25x_device_assp = { #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +static struct resource pxa27x_resource_keypad[] = { + [0] = { + .start = 0x41500000, + .end = 0x4150004c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KEYPAD, + .end = IRQ_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_keypad = { + .name = "pxa27x-keypad", + .id = -1, + .resource = pxa27x_resource_keypad, + .num_resources = ARRAY_SIZE(pxa27x_resource_keypad), +}; + +void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info) +{ + pxa_register_device(&pxa27x_device_keypad, info); +} + static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); static struct resource pxa27x_resource_ohci[] = { @@ -540,6 +567,37 @@ struct platform_device pxa27x_device_ssp3 = { .resource = pxa27x_resource_ssp3, .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), }; + +static struct resource pxa27x_resource_camera[] = { + [0] = { + .start = 0x50000000, + .end = 0x50000fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CAMERA, + .end = IRQ_CAMERA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32); + +static struct platform_device pxa27x_device_camera = { + .name = "pxa27x-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &pxa27x_dma_mask_camera, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa27x_resource_camera), + .resource = pxa27x_resource_camera, +}; + +void __init pxa_set_camera_info(struct pxacamera_platform_data *info) +{ + pxa_register_device(&pxa27x_device_camera, info); +} #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 96c7c8909068..fcab017f27ee 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -14,6 +14,7 @@ extern struct platform_device pxa_device_rtc; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; +extern struct platform_device pxa27x_device_keypad; extern struct platform_device pxa25x_device_ssp; extern struct platform_device pxa25x_device_nssp; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 3bb31314429a..edc4f07a230d 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,6 +23,7 @@ #include <asm/mach/arch.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ohci.h> #include <asm/arch/mmc.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 80721c610d41..331f29b2d0cd 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -19,14 +19,8 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/pm.h> -#include <linux/string.h> -#include <linux/sysdev.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/mach/map.h> @@ -134,59 +128,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - -#ifdef CONFIG_PM - -static unsigned long saved_gplr[4]; -static unsigned long saved_gpdr[4]; -static unsigned long saved_grer[4]; -static unsigned long saved_gfer[4]; - -static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - saved_gplr[i] = GPLR(gpio); - saved_gpdr[i] = GPDR(gpio); - saved_grer[i] = GRER(gpio); - saved_gfer[i] = GFER(gpio); - - /* Clear GPIO transition detect bits */ - GEDR(gpio) = GEDR(gpio); - } - return 0; -} - -static int pxa_gpio_resume(struct sys_device *dev) -{ - int i, gpio; - - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - /* restore level with set/clear */ - GPSR(gpio) = saved_gplr[i]; - GPCR(gpio) = ~saved_gplr[i]; - - GRER(gpio) = saved_grer[i]; - GFER(gpio) = saved_gfer[i]; - GPDR(gpio) = saved_gpdr[i]; - } - return 0; -} -#else -#define pxa_gpio_suspend NULL -#define pxa_gpio_resume NULL -#endif - -struct sysdev_class pxa_gpio_sysclass = { - .name = "gpio", - .suspend = pxa_gpio_suspend, - .resume = pxa_gpio_resume, -}; - -static int __init pxa_gpio_init(void) -{ - return sysdev_class_register(&pxa_gpio_sysclass); -} - -core_initcall(pxa_gpio_init); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index b3d10b0e52a0..5bb7ae757831 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -9,14 +9,13 @@ * published by the Free Software Foundation. */ +typedef int (*set_wake_t)(unsigned int, unsigned int); + struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq_low(void); -extern void __init pxa_init_irq_high(void); -extern void __init pxa_init_irq_gpio(int gpio_nr); -extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); -extern void __init pxa_init_gpio(int gpio_nr); +extern void __init pxa_init_irq(int irq_nr, set_wake_t fn); +extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); @@ -30,6 +29,8 @@ extern int pxa_last_gpio; mi->bank[__nr].size = (__size), \ mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #ifdef CONFIG_PXA25x extern unsigned pxa25x_get_clk_frequency_khz(int); extern unsigned pxa25x_get_memclk_frequency_10khz(void); @@ -56,3 +57,4 @@ extern unsigned pxa3xx_get_memclk_frequency_10khz(void); extern struct sysdev_class pxa_irq_sysclass; extern struct sysdev_class pxa_gpio_sysclass; +extern struct sysdev_class pxa3xx_mfp_sysclass; diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index 8638dd7dd076..7d3e16970be0 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -14,11 +14,14 @@ #include <linux/init.h> #include <linux/module.h> +#include <linux/irq.h> +#include <linux/sysdev.h> #include <asm/gpio.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "generic.h" @@ -129,69 +132,283 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) __raw_writel(mask, pxa->regbase + GPCR_OFFSET); } +#define GPIO_CHIP(_n) \ + [_n] = { \ + .regbase = GPIO##_n##_BASE, \ + .chip = { \ + .label = "gpio-" #_n, \ + .direction_input = pxa_gpio_direction_input, \ + .direction_output = pxa_gpio_direction_output, \ + .get = pxa_gpio_get, \ + .set = pxa_gpio_set, \ + .base = (_n) * 32, \ + .ngpio = 32, \ + }, \ + } + static struct pxa_gpio_chip pxa_gpio_chip[] = { - [0] = { - .regbase = GPIO0_BASE, - .chip = { - .label = "gpio-0", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 0, - .ngpio = 32, - }, - }, - [1] = { - .regbase = GPIO1_BASE, - .chip = { - .label = "gpio-1", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 32, - .ngpio = 32, - }, - }, - [2] = { - .regbase = GPIO2_BASE, - .chip = { - .label = "gpio-2", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 64, - .ngpio = 32, /* 21 for PXA25x */ - }, - }, + GPIO_CHIP(0), + GPIO_CHIP(1), + GPIO_CHIP(2), #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - [3] = { - .regbase = GPIO3_BASE, - .chip = { - .label = "gpio-3", - .direction_input = pxa_gpio_direction_input, - .direction_output = pxa_gpio_direction_output, - .get = pxa_gpio_get, - .set = pxa_gpio_set, - .base = 96, - .ngpio = 32, - }, - }, + GPIO_CHIP(3), #endif }; -void __init pxa_init_gpio(int gpio_nr) +/* + * PXA GPIO edge detection for IRQs: + * IRQs are generated on Falling-Edge, Rising-Edge, or both. + * Use this instead of directly setting GRER/GFER. + */ + +static unsigned long GPIO_IRQ_rising_edge[4]; +static unsigned long GPIO_IRQ_falling_edge[4]; +static unsigned long GPIO_IRQ_mask[4]; + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa25x() || cpu_is_pxa27x()) + return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2)); + else + return 0; +} + +static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) +{ + int gpio, idx; + + gpio = IRQ_TO_GPIO(irq); + idx = gpio >> 5; + + if (type == IRQ_TYPE_PROBE) { + /* Don't mess with enabled GPIOs using preconfigured edges or + * GPIOs set to alternate function or to output during probe + */ + if ((GPIO_IRQ_rising_edge[idx] | + GPIO_IRQ_falling_edge[idx] | + GPDR(gpio)) & GPIO_bit(gpio)) + return 0; + + if (__gpio_is_occupied(gpio)) + return 0; + + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + GPDR(gpio) &= ~GPIO_bit(gpio); + + if (type & IRQ_TYPE_EDGE_RISING) + __set_bit(gpio, GPIO_IRQ_rising_edge); + else + __clear_bit(gpio, GPIO_IRQ_rising_edge); + + if (type & IRQ_TYPE_EDGE_FALLING) + __set_bit(gpio, GPIO_IRQ_falling_edge); + else + __clear_bit(gpio, GPIO_IRQ_falling_edge); + + GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; + GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; + + pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, + ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), + ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); + return 0; +} + +/* + * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. + */ + +static void pxa_ack_low_gpio(unsigned int irq) +{ + GEDR0 = (1 << (irq - IRQ_GPIO0)); +} + +static void pxa_mask_low_gpio(unsigned int irq) +{ + ICMR &= ~(1 << (irq - PXA_IRQ(0))); +} + +static void pxa_unmask_low_gpio(unsigned int irq) +{ + ICMR |= 1 << (irq - PXA_IRQ(0)); +} + +static struct irq_chip pxa_low_gpio_chip = { + .name = "GPIO-l", + .ack = pxa_ack_low_gpio, + .mask = pxa_mask_low_gpio, + .unmask = pxa_unmask_low_gpio, + .set_type = pxa_gpio_irq_type, +}; + +/* + * Demux handler for GPIO>=2 edge detect interrupts + */ + +#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE) + +static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) +{ + int loop, bit, n; + unsigned long gedr[4]; + + do { + gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3; + gedr[1] = GEDR1 & GPIO_IRQ_mask[1]; + gedr[2] = GEDR2 & GPIO_IRQ_mask[2]; + gedr[3] = GEDR3 & GPIO_IRQ_mask[3]; + + GEDR0 = gedr[0]; GEDR1 = gedr[1]; + GEDR2 = gedr[2]; GEDR3 = gedr[3]; + + loop = 0; + bit = find_first_bit(gedr, GEDR_BITS); + while (bit < GEDR_BITS) { + loop = 1; + + n = PXA_GPIO_IRQ_BASE + bit; + desc_handle_irq(n, irq_desc + n); + + bit = find_next_bit(gedr, GEDR_BITS, bit + 1); + } + } while (loop); +} + +static void pxa_ack_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + GEDR(gpio) = GPIO_bit(gpio); +} + +static void pxa_mask_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + __clear_bit(gpio, GPIO_IRQ_mask); + GRER(gpio) &= ~GPIO_bit(gpio); + GFER(gpio) &= ~GPIO_bit(gpio); +} + +static void pxa_unmask_muxed_gpio(unsigned int irq) +{ + int gpio = irq - IRQ_GPIO(2) + 2; + int idx = gpio >> 5; + __set_bit(gpio, GPIO_IRQ_mask); + GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; + GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; +} + +static struct irq_chip pxa_muxed_gpio_chip = { + .name = "GPIO", + .ack = pxa_ack_muxed_gpio, + .mask = pxa_mask_muxed_gpio, + .unmask = pxa_unmask_muxed_gpio, + .set_type = pxa_gpio_irq_type, +}; + +void __init pxa_init_gpio(int gpio_nr, set_wake_t fn) { - int i; + int irq, i, gpio; + + pxa_last_gpio = gpio_nr - 1; + + /* clear all GPIO edge detects */ + for (i = 0; i < gpio_nr; i += 32) { + GFER(i) = 0; + GRER(i) = 0; + GEDR(i) = GEDR(i); + } + + /* GPIO 0 and 1 must have their mask bit always set */ + GPIO_IRQ_mask[0] = 3; + + for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { + set_irq_chip(irq, &pxa_low_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { + set_irq_chip(irq, &pxa_muxed_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + /* Install handler for GPIO>=2 edge detect interrupts */ + set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); + + pxa_low_gpio_chip.set_wake = fn; + pxa_muxed_gpio_chip.set_wake = fn; /* add a GPIO chip for each register bank. * the last PXA25x register only contains 21 GPIOs */ - for (i = 0; i < gpio_nr; i += 32) { - if (i+32 > gpio_nr) - pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i; - gpiochip_add(&pxa_gpio_chip[i/32].chip); + for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) { + if (gpio + 32 > gpio_nr) + pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio; + gpiochip_add(&pxa_gpio_chip[i].chip); } } + +#ifdef CONFIG_PM + +static unsigned long saved_gplr[4]; +static unsigned long saved_gpdr[4]; +static unsigned long saved_grer[4]; +static unsigned long saved_gfer[4]; + +static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) +{ + int i, gpio; + + for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { + saved_gplr[i] = GPLR(gpio); + saved_gpdr[i] = GPDR(gpio); + saved_grer[i] = GRER(gpio); + saved_gfer[i] = GFER(gpio); + + /* Clear GPIO transition detect bits */ + GEDR(gpio) = GEDR(gpio); + } + return 0; +} + +static int pxa_gpio_resume(struct sys_device *dev) +{ + int i, gpio; + + for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { + /* restore level with set/clear */ + GPSR(gpio) = saved_gplr[i]; + GPCR(gpio) = ~saved_gplr[i]; + + GRER(gpio) = saved_grer[i]; + GFER(gpio) = saved_gfer[i]; + GPDR(gpio) = saved_gpdr[i]; + } + return 0; +} +#else +#define pxa_gpio_suspend NULL +#define pxa_gpio_resume NULL +#endif + +struct sysdev_class pxa_gpio_sysclass = { + .name = "gpio", + .suspend = pxa_gpio_suspend, + .resume = pxa_gpio_resume, +}; + +static int __init pxa_gpio_init(void) +{ + return sysdev_class_register(&pxa_gpio_sysclass); +} + +core_initcall(pxa_gpio_init); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c new file mode 100644 index 000000000000..f01d18544133 --- /dev/null +++ b/arch/arm/mach-pxa/gumstix.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-pxa/gumstix.c + * + * Support for the Gumstix motherboards. + * + * Original Author: Craig Hughes + * Created: Feb 14, 2008 + * Copyright: Craig Hughes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Implemented based on lubbock.c by Nicolas Pitre and code from Craig + * Hughes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> +#include <asm/arch/gumstix.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> + +#include "generic.h" + +static struct resource flash_resource = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition gumstix_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + } , { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND + } +}; + +static struct flash_platform_data gumstix_flash_data = { + .map_name = "cfi_probe", + .parts = gumstix_partitions, + .nr_parts = ARRAY_SIZE(gumstix_partitions), + .width = 2, +}; + +static struct platform_device gumstix_flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &gumstix_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &gumstix_flash_device, +}; + +#ifdef CONFIG_MMC_PXA +static struct pxamci_platform_data gumstix_mci_platform_data; + +static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int, + void *data) +{ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO53_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + + return 0; +} + +static struct pxamci_platform_data gumstix_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = gumstix_mci_init, +}; + +static void __init gumstix_mmc_init(void) +{ + pxa_set_mci_info(&gumstix_mci_platform_data); +} +#else +static void __init gumstix_mmc_init(void) +{ + printk(KERN_INFO "Gumstix mmc disabled\n"); +} +#endif + +#ifdef CONFIG_USB_GADGET_PXA2XX +static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { + .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, + .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, +}; + +static void __init gumstix_udc_init(void) +{ + pxa_set_udc_info(&gumstix_udc_info); +} +#else +static void gumstix_udc_init(void) +{ + printk(KERN_INFO "Gumstix udc is disabled\n"); +} +#endif + +static void __init gumstix_init(void) +{ + gumstix_udc_init(); + gumstix_mmc_init(); + (void) platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(GUMSTIX, "Gumstix") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = gumstix_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 0a9434432c55..2637633f9166 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -32,6 +32,7 @@ #include <asm/mach/map.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/idp.h> #include <asm/arch/pxafb.h> #include <asm/arch/bitfield.h> diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 36c6a68beca2..a9a0c3fab159 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-pxa/irq.c * - * Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc. + * Generic PXA IRQ handling * * Author: Nicolas Pitre * Created: Jun 15, 2001 @@ -21,308 +21,58 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "generic.h" +#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) +#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) +#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) /* * This is for peripheral IRQs internal to the PXA chip. */ -static void pxa_mask_low_irq(unsigned int irq) +static int pxa_internal_irq_nr; + +static void pxa_mask_irq(unsigned int irq) { - ICMR &= ~(1 << irq); + _ICMR(irq) &= ~(1 << IRQ_BIT(irq)); } -static void pxa_unmask_low_irq(unsigned int irq) +static void pxa_unmask_irq(unsigned int irq) { - ICMR |= (1 << irq); + _ICMR(irq) |= 1 << IRQ_BIT(irq); } -static struct irq_chip pxa_internal_chip_low = { +static struct irq_chip pxa_internal_irq_chip = { .name = "SC", - .ack = pxa_mask_low_irq, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, + .ack = pxa_mask_irq, + .mask = pxa_mask_irq, + .unmask = pxa_unmask_irq, }; -void __init pxa_init_irq_low(void) +void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq; - /* disable all IRQs */ - ICMR = 0; + pxa_internal_irq_nr = irq_nr; - /* all IRQs are IRQ, not FIQ */ - ICLR = 0; + for (irq = 0; irq < irq_nr; irq += 32) { + _ICMR(irq) = 0; /* disable all IRQs */ + _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ + } /* only unmasked interrupts kick us out of idle */ ICCR = 1; - for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { - set_irq_chip(irq, &pxa_internal_chip_low); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - -/* - * This is for the second set of internal IRQs as found on the PXA27x. - */ - -static void pxa_mask_high_irq(unsigned int irq) -{ - ICMR2 &= ~(1 << (irq - 32)); -} - -static void pxa_unmask_high_irq(unsigned int irq) -{ - ICMR2 |= (1 << (irq - 32)); -} - -static struct irq_chip pxa_internal_chip_high = { - .name = "SC-hi", - .ack = pxa_mask_high_irq, - .mask = pxa_mask_high_irq, - .unmask = pxa_unmask_high_irq, -}; - -void __init pxa_init_irq_high(void) -{ - int irq; - - ICMR2 = 0; - ICLR2 = 0; - - for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) { - set_irq_chip(irq, &pxa_internal_chip_high); + for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) { + set_irq_chip(irq, &pxa_internal_irq_chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } -} -#endif - -/* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ - -static long GPIO_IRQ_rising_edge[4]; -static long GPIO_IRQ_falling_edge[4]; -static long GPIO_IRQ_mask[4]; - -static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) -{ - int gpio, idx; - - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; - - if (type == IRQT_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or - GPIOs set to alternate function or to output during probe */ - if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) & - GPIO_bit(gpio)) - return 0; - if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) - return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; - } - - /* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */ - - pxa_gpio_mode(gpio | GPIO_IN); - - if (type & __IRQT_RISEDGE) { - /* printk("rising "); */ - __set_bit (gpio, GPIO_IRQ_rising_edge); - } else { - __clear_bit (gpio, GPIO_IRQ_rising_edge); - } - - if (type & __IRQT_FALEDGE) { - /* printk("falling "); */ - __set_bit (gpio, GPIO_IRQ_falling_edge); - } else { - __clear_bit (gpio, GPIO_IRQ_falling_edge); - } - - /* printk("edges\n"); */ - - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; - return 0; -} - -/* - * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. - */ - -static void pxa_ack_low_gpio(unsigned int irq) -{ - GEDR0 = (1 << (irq - IRQ_GPIO0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, - .set_type = pxa_gpio_irq_type, -}; - -/* - * Demux handler for GPIO>=2 edge detect interrupts - */ - -static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask; - int loop; - - do { - loop = 0; - - mask = GEDR0 & GPIO_IRQ_mask[0] & ~3; - if (mask) { - GEDR0 = mask; - irq = IRQ_GPIO(2); - desc = irq_desc + irq; - mask >>= 2; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR1 & GPIO_IRQ_mask[1]; - if (mask) { - GEDR1 = mask; - irq = IRQ_GPIO(32); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR2 & GPIO_IRQ_mask[2]; - if (mask) { - GEDR2 = mask; - irq = IRQ_GPIO(64); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - - mask = GEDR3 & GPIO_IRQ_mask[3]; - if (mask) { - GEDR3 = mask; - irq = IRQ_GPIO(96); - desc = irq_desc + irq; - do { - if (mask & 1) - desc_handle_irq(irq, desc); - irq++; - desc++; - mask >>= 1; - } while (mask); - loop = 1; - } - } while (loop); -} - -static void pxa_ack_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - GEDR(gpio) = GPIO_bit(gpio); -} - -static void pxa_mask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - __clear_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) &= ~GPIO_bit(gpio); - GFER(gpio) &= ~GPIO_bit(gpio); -} - -static void pxa_unmask_muxed_gpio(unsigned int irq) -{ - int gpio = irq - IRQ_GPIO(2) + 2; - int idx = gpio >> 5; - __set_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; -} - -static struct irq_chip pxa_muxed_gpio_chip = { - .name = "GPIO", - .ack = pxa_ack_muxed_gpio, - .mask = pxa_mask_muxed_gpio, - .unmask = pxa_unmask_muxed_gpio, - .set_type = pxa_gpio_irq_type, -}; - -void __init pxa_init_irq_gpio(int gpio_nr) -{ - int irq, i; - - pxa_last_gpio = gpio_nr - 1; - - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; - GRER(i) = 0; - GEDR(i) = GEDR(i); - } - - /* GPIO 0 and 1 must have their mask bit always set */ - GPIO_IRQ_mask[0] = 3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { - set_irq_chip(irq, &pxa_muxed_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Install handler for GPIO>=2 edge detect interrupts */ - set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - - pxa_init_gpio(gpio_nr); -} - -void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) -{ - pxa_internal_chip_low.set_wake = set_wake; -#ifdef CONFIG_PXA27x - pxa_internal_chip_high.set_wake = set_wake; -#endif - pxa_low_gpio_chip.set_wake = set_wake; - pxa_muxed_gpio_chip.set_wake = set_wake; + pxa_internal_irq_chip.set_wake = fn; } #ifdef CONFIG_PM @@ -330,19 +80,11 @@ static unsigned long saved_icmr[2]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { - switch (dev->id) { - case 0: - saved_icmr[0] = ICMR; - ICMR = 0; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - saved_icmr[1] = ICMR2; - ICMR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + saved_icmr[i] = _ICMR(irq); + _ICMR(irq) = 0; } return 0; @@ -350,22 +92,14 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) static int pxa_irq_resume(struct sys_device *dev) { - switch (dev->id) { - case 0: - ICMR = saved_icmr[0]; - ICLR = 0; - ICCR = 1; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - ICMR2 = saved_icmr[1]; - ICLR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + _ICMR(irq) = saved_icmr[i]; + _ICLR(irq) = 0; } + ICCR = 1; return 0; } #else diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c index 2271d20ffeda..21880daabafe 100644 --- a/arch/arm/mach-pxa/leds-trizeps4.c +++ b/arch/arm/mach-pxa/leds-trizeps4.c @@ -18,6 +18,7 @@ #include <asm/leds.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/trizeps4.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 0a4b54c21314..03396063b561 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -37,12 +37,11 @@ #include <asm/arch/gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/ssp.h> +#include <asm/arch/pxa27x_keypad.h> #include <asm/arch/littleton.h> #include "generic.h" -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - /* Littleton MFP configurations */ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* LCD */ @@ -76,6 +75,21 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = { /* Debug Ethernet */ GPIO90_GPIO, + + /* Keypad */ + GPIO107_KP_DKIN_0, + GPIO108_KP_DKIN_1, + GPIO115_KP_MKIN_0, + GPIO116_KP_MKIN_1, + GPIO117_KP_MKIN_2, + GPIO118_KP_MKIN_3, + GPIO119_KP_MKIN_4, + GPIO120_KP_MKIN_5, + GPIO121_KP_MKOUT_0, + GPIO122_KP_MKOUT_1, + GPIO123_KP_MKOUT_2, + GPIO124_KP_MKOUT_3, + GPIO125_KP_MKOUT_4, }; static struct resource smc91x_resources[] = { @@ -300,6 +314,54 @@ static void littleton_init_lcd(void) static inline void littleton_init_lcd(void) {}; #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int littleton_matrix_key_map[] = { + /* KEY(row, col, key_code) */ + KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), + KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7), + KEY(1, 2, KEY_8), KEY(2, 2, KEY_9), + + KEY(0, 3, KEY_KPASTERISK), /* * */ + KEY(2, 3, KEY_KPDOT), /* # */ + + KEY(5, 4, KEY_ENTER), + + KEY(5, 0, KEY_UP), + KEY(5, 1, KEY_DOWN), + KEY(5, 2, KEY_LEFT), + KEY(5, 3, KEY_RIGHT), + KEY(3, 2, KEY_HOME), + KEY(4, 1, KEY_END), + KEY(3, 3, KEY_BACK), + + KEY(4, 0, KEY_SEND), + KEY(4, 2, KEY_VOLUMEUP), + KEY(4, 3, KEY_VOLUMEDOWN), + + KEY(3, 0, KEY_F22), /* soft1 */ + KEY(3, 1, KEY_F23), /* soft2 */ +}; + +static struct pxa27x_keypad_platform_data littleton_keypad_info = { + .matrix_key_rows = 6, + .matrix_key_cols = 5, + .matrix_key_map = littleton_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; +static void __init littleton_init_keypad(void) +{ + pxa_set_keypad_info(&littleton_keypad_info); +} +#else +static inline void littleton_init_keypad(void) {} +#endif + static void __init littleton_init(void) { /* initialize MFP configurations */ @@ -312,6 +374,7 @@ static void __init littleton_init(void) platform_device_register(&smc91x_device); littleton_init_lcd(); + littleton_init_keypad(); } MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index afa62ffe3ad5..a20e4b1649d6 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -39,6 +39,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/lpd270.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e7ae4bb3e361..ca209c443f34 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -42,6 +42,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/lubbock.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> @@ -51,6 +52,40 @@ #include "generic.h" #include "devices.h" +static unsigned long lubbock_pin_config[] __initdata = { + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - SMC ethernet */ + + /* SSP data pins */ + GPIO23_SSP1_SCLK, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + + /* wakeup */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, +}; #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) @@ -186,26 +221,6 @@ static struct platform_device sa1111_device = { .resource = sa1111_resources, }; -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = 0x0c000c00, - .end = 0x0c0fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = LUBBOCK_ETH_IRQ, - .end = LUBBOCK_ETH_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, - [2] = { - .name = "smc91x-attrib", - .start = 0x0e000000, - .end = 0x0e0fffff, - .flags = IORESOURCE_MEM, - }, -}; - /* ADS7846 is connected through SSP ... and if your board has J5 populated, * you can select it to replace the ucb1400 by switching the touchscreen cable * (to J5) and poking board registers (as done below). Else it's only useful @@ -261,6 +276,26 @@ static struct spi_board_info spi_board_info[] __initdata = { { }, }; +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = 0x0c000c00, + .end = 0x0c0fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LUBBOCK_ETH_IRQ, + .end = LUBBOCK_ETH_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, + [2] = { + .name = "smc91x-attrib", + .start = 0x0e000000, + .end = 0x0e0fffff, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, @@ -404,10 +439,6 @@ static int lubbock_mci_init(struct device *dev, irq_handler_t detect_int, void *data) { - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - /* detect card insert/eject */ mmc_detect_int = detect_int; init_timer(&mmc_timer); @@ -457,6 +488,8 @@ static void __init lubbock_init(void) { int flashboot = (LUB_CONF_SWITCHES & 1); + pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config)); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); @@ -489,46 +522,6 @@ static void __init lubbock_map_io(void) pxa_map_io(); iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc)); - /* SSP data pins */ - pxa_gpio_mode(GPIO23_SCLK_MD); - pxa_gpio_mode(GPIO25_STXD_MD); - pxa_gpio_mode(GPIO26_SRXD_MD); - - /* This enables the BTUART */ - pxa_gpio_mode(GPIO42_BTRXD_MD); - pxa_gpio_mode(GPIO43_BTTXD_MD); - pxa_gpio_mode(GPIO44_BTCTS_MD); - pxa_gpio_mode(GPIO45_BTRTS_MD); - - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - - /* This is for the SMC chip select */ - pxa_gpio_mode(GPIO79_nCS_3_MD); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00008000; - PGSR1 = 0x003F0202; - PGSR2 = 0x0001C000; PCFR |= PCFR_OPDE; } diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d98ef7ada2f8..d70be75bd199 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -16,24 +16,106 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/mfd/htc-egpio.h> +#include <linux/mfd/htc-pasic3.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <linux/pda_power.h> #include <asm/gpio.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/arch/magician.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxafb.h> +#include <asm/arch/i2c.h> +#include <asm/arch/mmc.h> #include <asm/arch/irda.h> #include <asm/arch/ohci.h> #include "generic.h" +static unsigned long magician_pin_config[] = { + + /* SDRAM and Static Memory I/O Signals */ + GPIO20_nSDCS_2, + GPIO21_nSDCS_3, + GPIO15_nCS_1, + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO80_nCS_4, + GPIO33_nCS_5, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* PWM 0 */ + GPIO16_PWM0_OUT, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* SSP 2 */ + GPIO19_SSP2_SCLK, + GPIO14_SSP2_SFRM, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* QCI */ + GPIO12_CIF_DD_7, + GPIO17_CIF_DD_6, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO81_CIF_DD_0, + GPIO82_CIF_DD_5, + GPIO84_CIF_FV, + GPIO85_CIF_LV, +}; + /* * IRDA */ @@ -83,8 +165,64 @@ static struct platform_device gpio_keys = { .id = -1, }; + +/* + * EGPIO (Xilinx CPLD) + * + * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + */ + +static struct resource egpio_resources[] = { + [0] = { + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct htc_egpio_chip egpio_chips[] = { + [0] = { + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + }, + [1] = { + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, + }, +}; + +static struct htc_egpio_platform_data egpio_info = { + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), +}; + +static struct platform_device egpio = { + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), + .dev = { + .platform_data = &egpio_info, + }, +}; + /* - * LCD - Toppoly TD028STEB1 + * LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { @@ -103,12 +241,99 @@ static struct pxafb_mode_info toppoly_modes[] = { }, }; +static struct pxafb_mode_info samsung_modes[] = { + { + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + }, +}; + +static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Toppoly LCD power\n"); + + if (on) { + pr_debug("on\n"); + gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + udelay(2000); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + udelay(2000); + /* FIXME: enable LCDC here */ + udelay(2000); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + udelay(2000); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + } else { + pr_debug("off\n"); + msleep(15); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + udelay(500); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + udelay(1000); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + +static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Samsung LCD power\n"); + + if (on) { + pr_debug("on\n"); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + mdelay(10); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + mdelay(30); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + mdelay(10); + } else { + pr_debug("off\n"); + mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + mdelay(30); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + mdelay(10); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_PixRsEdg, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixRsEdg, + .pxafb_lcd_power = toppoly_lcd_power, +}; + +static struct pxafb_mach_info samsung_info = { + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_LDDALT | LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixFlEdg, + .pxafb_lcd_power = samsung_lcd_power, }; /* @@ -120,9 +345,18 @@ static void magician_set_bl_intensity(int intensity) if (intensity) { PWM_CTRL0 = 1; PWM_PERVAL0 = 0xc8; - PWM_PWDUTY0 = intensity; + if (intensity > 0xc7) { + PWM_PWDUTY0 = intensity - 0x48; + gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); + } else { + PWM_PWDUTY0 = intensity; + gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0); + } + gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1); pxa_set_cken(CKEN_PWM0, 1); } else { + /* PWM_PWDUTY0 = intensity; */ + gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0); pxa_set_cken(CKEN_PWM0, 0); } } @@ -130,18 +364,215 @@ static void magician_set_bl_intensity(int intensity) static struct generic_bl_info backlight_info = { .default_intensity = 0x64, .limit_mask = 0x0b, - .max_intensity = 0xc7, + .max_intensity = 0xc7+0x48, .set_bl_intensity = magician_set_bl_intensity, }; static struct platform_device backlight = { - .name = "corgi-bl", + .name = "generic-bl", .dev = { .platform_data = &backlight_info, }, .id = -1, }; +/* + * LEDs + */ + +struct gpio_led gpio_leds[] = { + { + .name = "magician::vibra", + .default_trigger = "none", + .gpio = GPIO22_MAGICIAN_VIBRA_EN, + }, + { + .name = "magician::phone_bl", + .default_trigger = "none", + .gpio = GPIO103_MAGICIAN_LED_KP, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct pasic3_led pasic3_leds[] = { + { + .led = { + .name = "magician:red", + .default_trigger = "ds2760-battery.0-charging", + }, + .hw_num = 0, + .bit2 = PASIC3_BIT2_LED0, + .mask = PASIC3_MASK_LED0, + }, + { + .led = { + .name = "magician:green", + .default_trigger = "ds2760-battery.0-charging-or-full", + }, + .hw_num = 1, + .bit2 = PASIC3_BIT2_LED1, + .mask = PASIC3_MASK_LED1, + }, + { + .led = { + .name = "magician:blue", + .default_trigger = "bluetooth", + }, + .hw_num = 2, + .bit2 = PASIC3_BIT2_LED2, + .mask = PASIC3_MASK_LED2, + }, +}; + +static struct platform_device pasic3; + +static struct pasic3_leds_machinfo __devinit pasic3_leds_info = { + .num_leds = ARRAY_SIZE(pasic3_leds), + .power_gpio = EGPIO_MAGICIAN_LED_POWER, + .leds = pasic3_leds, +}; + +/* + * PASIC3 with DS1WM + */ + +static struct resource pasic3_resources[] = { + [0] = { + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 0x1b, + .flags = IORESOURCE_MEM, + }, + /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ + [1] = { + .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct pasic3_platform_data pasic3_platform_data = { + .bus_shift = 2, + .led_pdata = &pasic3_leds_info, + .clock_rate = 4000000, +}; + +static struct platform_device pasic3 = { + .name = "pasic3", + .id = -1, + .num_resources = ARRAY_SIZE(pasic3_resources), + .resource = pasic3_resources, + .dev = { + .platform_data = &pasic3_platform_data, + }, +}; + +/* + * External power + */ + +static int magician_is_ac_online(void) +{ + return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); +} + +static int magician_is_usb_online(void) +{ + return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); +} + +static void magician_set_charge(int flags) +{ + gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); + gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); +} + +static char *magician_supplicants[] = { + "ds2760-battery.0", "backup-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_AC, + .end = IRQ_MAGICIAN_AC, + }, + [1] = { + .name = "usb", + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_AC, + .end = IRQ_MAGICIAN_AC, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + + +/* + * MMC/SD + */ + +static int magician_mci_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + return request_irq(IRQ_MAGICIAN_SD, detect_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + "MMC card detect", data); +} + +static void magician_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *pdata = dev->platform_data; + + gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask); +} + +static int magician_mci_get_ro(struct device *dev) +{ + return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY)); +} + +static void magician_mci_exit(struct device *dev, void *data) +{ + free_irq(IRQ_MAGICIAN_SD, data); +} + +static struct pxamci_platform_data magician_mci_info = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .get_ro = magician_mci_get_ro, + .setpower = magician_mci_setpower, + .exit = magician_mci_exit, +}; + /* * USB OHCI @@ -166,6 +597,11 @@ static struct pxaohci_platform_data magician_ohci_info = { * StrataFlash */ +static void magician_set_vpp(struct map_info *map, int vpp) +{ + gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); +} + #define PXA_CS_SIZE 0x04000000 static struct resource strataflash_resource = { @@ -176,13 +612,14 @@ static struct resource strataflash_resource = { static struct physmap_flash_data strataflash_data = { .width = 4, + .set_vpp = magician_set_vpp, }; static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .num_resources = 1, .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, @@ -194,16 +631,43 @@ static struct platform_device strataflash = { static struct platform_device *devices[] __initdata = { &gpio_keys, + &egpio, &backlight, + &pasic3, + &power_supply, &strataflash, + &leds_gpio, }; static void __init magician_init(void) { + void __iomem *cpld; + int lcd_select; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_i2c_info(NULL); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); pxa_set_ficp_info(&magician_ficp_info); - set_pxa_fb_info(&toppoly_info); + + /* Check LCD type we have */ + cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); + if (cpld) { + u8 board_id = __raw_readb(cpld+0x14); + system_rev = board_id & 0x7; + lcd_select = board_id & 0x8; + iounmap(cpld); + pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); + if (lcd_select && (system_rev < 3)) + pxa_gpio_mode(GPIO75_MAGICIAN_SAMSUNG_POWER_MD); + pxa_gpio_mode(GPIO104_MAGICIAN_LCD_POWER_1_MD); + pxa_gpio_mode(GPIO105_MAGICIAN_LCD_POWER_2_MD); + pxa_gpio_mode(GPIO106_MAGICIAN_LCD_POWER_3_MD); + set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + } else + pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 72a436fb9a29..18d47cfa2a18 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/backlight.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/types.h> #include <asm/setup.h> @@ -40,16 +42,94 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/mainstone.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> +#include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/irda.h> #include <asm/arch/ohci.h> +#include <asm/arch/pxa27x_keypad.h> #include "generic.h" #include "devices.h" +static unsigned long mainstone_pin_config[] = { + /* Chip Select */ + GPIO15_nCS_1, + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO16_PWM0_OUT, /* Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + /* USB Host Port 1 */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* AC97 */ + GPIO45_AC97_SYSCLK, + + /* Keypad */ + GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO94_KP_DKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO95_KP_DKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO96_KP_MKOUT_6, + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, +}; static unsigned long mainstone_irq_enabled; @@ -278,13 +358,13 @@ static int mainstone_backlight_update_status(struct backlight_device *bl) bl->props.fb_blank != FB_BLANK_UNBLANK) brightness = 0; - if (brightness != 0) { - pxa_gpio_mode(GPIO16_PWM0_MD); + if (brightness != 0) pxa_set_cken(CKEN_PWM0, 1); - } + PWM_CTRL0 = 0; PWM_PWDUTY0 = brightness; PWM_PERVAL0 = bl->props.max_brightness; + if (brightness == 0) pxa_set_cken(CKEN_PWM0, 0); return 0; /* pointless return value */ @@ -362,16 +442,6 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in { int err; - /* - * setup GPIO for PXA27x MMC controller - */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - /* make sure SD/Memory Stick multiplexer's signals * are routed to MMC controller */ @@ -434,19 +504,39 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct gpio_keys_button gpio_keys_button[] = { + [0] = { + .desc = "wakeup", + .code = KEY_SUSPEND, + .type = EV_KEY, + .gpio = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data mainstone_gpio_keys = { + .buttons = gpio_keys_button, + .nbuttons = 1, +}; + +static struct platform_device mst_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mainstone_gpio_keys, + }, +}; + static struct platform_device *platform_devices[] __initdata = { &smc91x_device, &mst_audio_device, &mst_flash_device[0], &mst_flash_device[1], + &mst_gpio_keys_device, }; static int mainstone_ohci_init(struct device *dev) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - /* Set the Power Control Polarity Low and Power Sense Polarity Low to active low. */ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & @@ -460,10 +550,63 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = { .init = mainstone_ohci_init, }; +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int mainstone_matrix_keys[] = { + KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C), + KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F), + KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I), + KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L), + KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O), + KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R), + KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U), + KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X), + KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z), + + KEY(0, 4, KEY_DOT), /* . */ + KEY(1, 4, KEY_CLOSE), /* @ */ + KEY(4, 4, KEY_SLASH), + KEY(5, 4, KEY_BACKSLASH), + KEY(0, 5, KEY_HOME), + KEY(1, 5, KEY_LEFTSHIFT), + KEY(2, 5, KEY_SPACE), + KEY(3, 5, KEY_SPACE), + KEY(4, 5, KEY_ENTER), + KEY(5, 5, KEY_BACKSPACE), + + KEY(0, 6, KEY_UP), + KEY(1, 6, KEY_DOWN), + KEY(2, 6, KEY_LEFT), + KEY(3, 6, KEY_RIGHT), + KEY(4, 6, KEY_SELECT), +}; + +struct pxa27x_keypad_platform_data mainstone_keypad_info = { + .matrix_key_rows = 6, + .matrix_key_cols = 7, + .matrix_key_map = mainstone_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(mainstone_matrix_keys), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; + +static void __init mainstone_init_keypad(void) +{ + pxa_set_keypad_info(&mainstone_keypad_info); +} +#else +static inline void mainstone_init_keypad(void) {} +#endif + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config)); + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; mst_flash_data[1].width = 4; @@ -480,31 +623,6 @@ static void __init mainstone_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; - /* - * On Mainstone, we route AC97_SYSCLK via GPIO45 to - * the audio daughter card - */ - pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - - GPSR(GPIO48_nPOE) = - GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | - GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | - GPIO_bit(GPIO85_nPCE_1) | - GPIO_bit(GPIO54_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO85_nPCE_1_MD); - pxa_gpio_mode(GPIO54_nPCE_2_MD); - pxa_gpio_mode(GPIO79_pSKTSEL_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" @@ -520,6 +638,9 @@ static void __init mainstone_init(void) pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); pxa_set_ohci_info(&mainstone_ohci_platform_data); + pxa_set_i2c_info(NULL); + + mainstone_init_keypad(); } @@ -537,23 +658,9 @@ static void __init mainstone_map_io(void) pxa_map_io(); iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc)); - /* initialize sleep mode regs (wake-up sources, etc) */ - PGSR0 = 0x00008800; - PGSR1 = 0x00000002; - PGSR2 = 0x0001FC00; - PGSR3 = 0x00001F81; - PWER = 0xC0000002; - PRER = 0x00000002; - PFER = 0x00000002; /* for use I SRAM as framebuffer. */ PSLR |= 0xF04; PCFR = 0x66; - /* For Keypad wakeup. */ - KPC &=~KPC_ASACT; - KPC |=KPC_AS; - PKWR = 0x000FD000; - /* Need read PKWR back after set it. */ - PKWR; } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c new file mode 100644 index 000000000000..22097a1707cc --- /dev/null +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -0,0 +1,245 @@ +/* + * linux/arch/arm/mach-pxa/mfp-pxa2xx.c + * + * PXA2xx pin mux configuration support + * + * The GPIOs on PXA2xx can be configured as one of many alternate + * functions, this is by concept samilar to the MFP configuration + * on PXA3xx, what's more important, the low power pin state and + * wakeup detection are also supported by the same framework. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa2xx.h> + +#include "generic.h" + +#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3) + +#define PWER_WE35 (1 << 24) + +struct gpio_desc { + unsigned valid : 1; + unsigned can_wakeup : 1; + unsigned keypad_gpio : 1; + unsigned int mask; /* bit mask in PWER or PKWR */ + unsigned long config; +}; + +static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1]; + +static int __mfp_config_gpio(unsigned gpio, unsigned long c) +{ + unsigned long gafr, mask = GPIO_bit(gpio); + int fn; + + fn = MFP_AF(c); + if (fn > 3) + return -EINVAL; + + /* alternate function and direction */ + gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2)); + GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2)); + + if (c & MFP_DIR_OUT) + GPDR(gpio) |= mask; + else + GPDR(gpio) &= ~mask; + + /* low power state */ + switch (c & MFP_LPM_STATE_MASK) { + case MFP_LPM_DRIVE_HIGH: + PGSR(gpio) |= mask; + break; + case MFP_LPM_DRIVE_LOW: + PGSR(gpio) &= ~mask; + break; + case MFP_LPM_INPUT: + break; + default: + pr_warning("%s: invalid low power state for GPIO%d\n", + __func__, gpio); + return -EINVAL; + } + + /* give early warning if MFP_LPM_CAN_WAKEUP is set on the + * configurations of those pins not able to wakeup + */ + if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) { + pr_warning("%s: GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; + } + + if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) { + pr_warning("%s: output GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; + } + + return 0; +} + +void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num) +{ + unsigned long flags; + unsigned long *c; + int i, gpio; + + for (i = 0, c = mfp_cfgs; i < num; i++, c++) { + + gpio = mfp_to_gpio(MFP_PIN(*c)); + + if (!gpio_desc[gpio].valid) { + pr_warning("%s: GPIO%d is invalid pin\n", + __func__, gpio); + continue; + } + + local_irq_save(flags); + + gpio_desc[gpio].config = *c; + __mfp_config_gpio(gpio, *c); + + local_irq_restore(flags); + } +} + +int gpio_set_wake(unsigned int gpio, unsigned int on) +{ + struct gpio_desc *d; + unsigned long c; + + if (gpio > mfp_to_gpio(MFP_PIN_GPIO127)) + return -EINVAL; + + d = &gpio_desc[gpio]; + c = d->config; + + if (!d->valid) + return -EINVAL; + + if (d->keypad_gpio) + return -EINVAL; + + if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) { + if (on) { + PWER |= d->mask; + + if (c & MFP_LPM_EDGE_RISE) + PRER |= d->mask; + else + PRER &= ~d->mask; + + if (c & MFP_LPM_EDGE_FALL) + PFER |= d->mask; + else + PFER &= ~d->mask; + } else { + PWER &= ~d->mask; + PRER &= ~d->mask; + PFER &= ~d->mask; + } + } + return 0; +} + +#ifdef CONFIG_PXA25x +static int __init pxa25x_mfp_init(void) +{ + int i; + + if (cpu_is_pxa25x()) { + for (i = 0; i <= 84; i++) + gpio_desc[i].valid = 1; + + for (i = 0; i <= 15; i++) { + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + } + + return 0; +} +postcore_initcall(pxa25x_mfp_init); +#endif /* CONFIG_PXA25x */ + +#ifdef CONFIG_PXA27x +static int pxa27x_pkwr_gpio[] = { + 13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94, + 95, 96, 97, 98, 99, 100, 101, 102 +}; + +int keypad_set_wake(unsigned int on) +{ + unsigned int i, gpio, mask = 0; + + if (!on) { + PKWR = 0; + return 0; + } + + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + + gpio = pxa27x_pkwr_gpio[i]; + + if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + mask |= gpio_desc[gpio].mask; + } + + PKWR = mask; + return 0; +} + +static int __init pxa27x_mfp_init(void) +{ + int i, gpio; + + if (cpu_is_pxa27x()) { + for (i = 0; i <= 120; i++) { + /* skip GPIO2, 5, 6, 7, 8, they are not + * valid pins allow configuration + */ + if (i == 2 || i == 5 || i == 6 || + i == 7 || i == 8) + continue; + + gpio_desc[i].valid = 1; + } + + /* Keypad GPIOs */ + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + gpio = pxa27x_pkwr_gpio[i]; + gpio_desc[gpio].can_wakeup = 1; + gpio_desc[gpio].keypad_gpio = 1; + gpio_desc[gpio].mask = 1 << i; + } + + /* Overwrite GPIO13 as a PWER wakeup source */ + for (i = 0; i <= 15; i++) { + /* skip GPIO2, 5, 6, 7, 8 */ + if (GPIO_bit(i) & 0x1e4) + continue; + + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + + gpio_desc[35].can_wakeup = 1; + gpio_desc[35].mask = PWER_WE35; + } + + return 0; +} +postcore_initcall(pxa27x_mfp_init); +#endif /* CONFIG_PXA27x */ diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index f5809adce298..b84c3ba7a8d6 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -234,22 +234,22 @@ static int pxa3xx_mfp_resume(struct sys_device *d) return 0; } +#else +#define pxa3xx_mfp_suspend NULL +#define pxa3xx_mfp_resume NULL +#endif -static struct sysdev_class mfp_sysclass = { +struct sysdev_class pxa3xx_mfp_sysclass = { .name = "mfp", .suspend = pxa3xx_mfp_suspend, .resume = pxa3xx_mfp_resume, }; -static struct sys_device mfp_device = { - .id = 0, - .cls = &mfp_sysclass, -}; - static int __init mfp_init_devicefs(void) { - sysdev_class_register(&mfp_sysclass); - return sysdev_register(&mfp_device); + if (cpu_is_pxa3xx()) + return sysdev_class_register(&pxa3xx_mfp_sysclass); + + return 0; } -device_initcall(mfp_init_devicefs); -#endif +postcore_initcall(mfp_init_devicefs); diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index c14696b9979d..3b945eb0aee3 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,6 +29,7 @@ #include <asm/mach/arch.h> #include <asm/arch/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/pxa2xx-regs.h> #include <asm/arch/pxa2xx_spi.h> #include <asm/arch/pcm027.h> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 3dda16a20049..e6be9d0aeccf 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,8 +23,16 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/ide.h> +#include <linux/i2c.h> + +#include <media/soc_camera.h> + +#include <asm/gpio.h> +#include <asm/arch/i2c.h> +#include <asm/arch/camera.h> #include <asm/mach/map.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> #include <asm/arch/pcm990_baseboard.h> @@ -258,6 +266,76 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = { }; /* + * PXA27x Camera specific stuff + */ +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static int pcm990_pxacamera_init(struct device *dev) +{ + pxa_gpio_mode(GPIO98_CIF_DD_0_MD); + pxa_gpio_mode(GPIO105_CIF_DD_1_MD); + pxa_gpio_mode(GPIO104_CIF_DD_2_MD); + pxa_gpio_mode(GPIO103_CIF_DD_3_MD); + pxa_gpio_mode(GPIO95_CIF_DD_4_MD); + pxa_gpio_mode(GPIO94_CIF_DD_5_MD); + pxa_gpio_mode(GPIO93_CIF_DD_6_MD); + pxa_gpio_mode(GPIO108_CIF_DD_7_MD); + pxa_gpio_mode(GPIO107_CIF_DD_8_MD); + pxa_gpio_mode(GPIO106_CIF_DD_9_MD); + pxa_gpio_mode(GPIO42_CIF_MCLK_MD); + pxa_gpio_mode(GPIO45_CIF_PCLK_MD); + pxa_gpio_mode(GPIO43_CIF_FV_MD); + pxa_gpio_mode(GPIO44_CIF_LV_MD); + + return 0; +} + +/* + * CICR4: PCLK_EN: Pixel clock is supplied by the sensor + * MCLK_EN: Master clock is generated by PXA + * PCP: Data sampled on the falling edge of pixel clock + */ +struct pxacamera_platform_data pcm990_pxacamera_platform_data = { + .init = pcm990_pxacamera_init, + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/, + .mclk_10khz = 1000, +}; + +#include <linux/i2c/pca953x.h> + +static struct pca953x_platform_data pca9536_data = { + .gpio_base = NR_BUILTIN_GPIO + 1, +}; + +static struct soc_camera_link iclink[] = { + { + .bus_id = 0, /* Must match with the camera ID above */ + .gpio = NR_BUILTIN_GPIO + 1, + }, { + .bus_id = 0, /* Must match with the camera ID above */ + } +}; + +/* Board I2C devices. */ +static struct i2c_board_info __initdata pcm990_i2c_devices[] = { + { + /* Must initialize before the camera(s) */ + I2C_BOARD_INFO("pca953x", 0x41), + .type = "pca9536", + .platform_data = &pca9536_data, + }, { + I2C_BOARD_INFO("mt9v022", 0x48), + .type = "mt9v022", + .platform_data = &iclink[0], /* With extender */ + }, { + I2C_BOARD_INFO("mt9m001", 0x5d), + .type = "mt9m001", + .platform_data = &iclink[0], /* With extender */ + }, +}; +#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ + +/* * AC97 support * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ */ @@ -326,5 +404,14 @@ void __init pcm990_baseboard_init(void) /* USB host */ pxa_set_ohci_info(&pcm990_ohci_platform_data); + pxa_set_i2c_info(NULL); + +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) + pxa_set_camera_info(&pcm990_pxacamera_platform_data); + + i2c_register_board_info(0, pcm990_i2c_devices, + ARRAY_SIZE(pcm990_i2c_devices)); +#endif + printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 209eabf0ed3e..ca5ac196b47b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -32,6 +32,7 @@ #include <asm/mach/irq.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 599e53fcc2c5..d9b5450aee5b 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,6 +26,7 @@ #include <asm/hardware.h> #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -129,6 +130,8 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), + /* INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), @@ -228,24 +231,10 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); - uint32_t gpio_bit, mask = 0; - - if (gpio >= 0 && gpio <= 15) { - gpio_bit = GPIO_bit(gpio); - mask = gpio_bit; - if (on) { - if (GRER(gpio) | gpio_bit) - PRER |= gpio_bit; - else - PRER &= ~gpio_bit; - - if (GFER(gpio) | gpio_bit) - PFER |= gpio_bit; - else - PFER &= ~gpio_bit; - } - goto set_pwer; - } + uint32_t mask = 0; + + if (gpio >= 0 && gpio < 85) + return gpio_set_wake(gpio, on); if (irq == IRQ_RTCAlrm) { mask = PWER_RTC; @@ -265,9 +254,8 @@ set_pwer: void __init pxa25x_init_irq(void) { - pxa_init_irq_low(); - pxa_init_irq_gpio(85); - pxa_init_irq_set_wake(pxa25x_set_wake); + pxa_init_irq(32, pxa25x_set_wake); + pxa_init_gpio(85, pxa25x_set_wake); } static struct platform_device *pxa25x_devices[] __initdata = { @@ -325,4 +313,4 @@ static int __init pxa25x_init(void) return ret; } -subsys_initcall(pxa25x_init); +postcore_initcall(pxa25x_init); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 46a951c3e5a0..7a2449dd0fd4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,6 +23,7 @@ #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa27x.h> #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -151,12 +152,15 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), - INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), + INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL), + /* INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), @@ -283,37 +287,16 @@ static inline void pxa27x_init_pm(void) {} /* PXA27x: Various gpios can issue wakeup events. This logic only * handles the simple cases, not the WEMUX2 and WEMUX3 options */ -#define PXA27x_GPIO_NOWAKE_MASK \ - ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -#define WAKEMASK(gpio) \ - (((gpio) <= 15) \ - ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ - : ((gpio == 35) ? (1 << 24) : 0)) - static int pxa27x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); uint32_t mask; - if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { - if (WAKEMASK(gpio) == 0) - return -EINVAL; - - mask = WAKEMASK(gpio); - - if (on) { - if (GRER(gpio) | GPIO_bit(gpio)) - PRER |= mask; - else - PRER &= ~mask; + if (gpio >= 0 && gpio < 128) + return gpio_set_wake(gpio, on); - if (GFER(gpio) | GPIO_bit(gpio)) - PFER |= mask; - else - PFER &= ~mask; - } - goto set_pwer; - } + if (irq == IRQ_KEYPAD) + return keypad_set_wake(on); switch (irq) { case IRQ_RTCAlrm: @@ -326,7 +309,6 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) return -EINVAL; } -set_pwer: if (on) PWER |= mask; else @@ -337,10 +319,8 @@ set_pwer: void __init pxa27x_init_irq(void) { - pxa_init_irq_low(); - pxa_init_irq_high(); - pxa_init_irq_gpio(128); - pxa_init_irq_set_wake(pxa27x_set_wake); + pxa_init_irq(34, pxa27x_set_wake); + pxa_init_gpio(128, pxa27x_set_wake); } /* @@ -386,10 +366,6 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa27x_sysdev[] = { { - .id = 0, - .cls = &pxa_irq_sysclass, - }, { - .id = 1, .cls = &pxa_irq_sysclass, }, { .cls = &pxa_gpio_sysclass, @@ -420,4 +396,4 @@ static int __init pxa27x_init(void) return ret; } -subsys_initcall(pxa27x_init); +postcore_initcall(pxa27x_init); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 35f25fdaeba3..dde355e88fa1 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -110,6 +110,25 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void) } /* + * Return the current AC97 clock frequency. + */ +static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk) +{ + unsigned long rate = 312000000; + unsigned long ac97_div; + + ac97_div = AC97_DIV; + + /* This may loose precision for some rates but won't for the + * standard 24.576MHz. + */ + rate /= (ac97_div >> 12) & 0x7fff; + rate *= (ac97_div & 0xfff); + + return rate; +} + +/* * Return the current HSIO bus clock frequency */ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) @@ -156,6 +175,27 @@ static const struct clkops clk_pxa3xx_hsio_ops = { .getrate = clk_pxa3xx_hsio_getrate, }; +static const struct clkops clk_pxa3xx_ac97_ops = { + .enable = clk_pxa3xx_cken_enable, + .disable = clk_pxa3xx_cken_disable, + .getrate = clk_pxa3xx_ac97_getrate, +}; + +static void clk_pout_enable(struct clk *clk) +{ + OSCC |= OSCC_PEN; +} + +static void clk_pout_disable(struct clk *clk) +{ + OSCC &= ~OSCC_PEN; +} + +static const struct clkops clk_pout_ops = { + .enable = clk_pout_enable, + .disable = clk_pout_disable, +}; + #define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \ { \ .name = _name, \ @@ -175,8 +215,16 @@ static const struct clkops clk_pxa3xx_hsio_ops = { } static struct clk pxa3xx_clks[] = { - PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), - PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), + { + .name = "CLK_POUT", + .ops = &clk_pout_ops, + .rate = 13000000, + .delay = 70, + }, + + PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), + PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), + PXA3xx_CK("AC97CLK", AC97, &clk_pxa3xx_ac97_ops, NULL), PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), @@ -185,6 +233,7 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), + PXA3xx_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), @@ -305,8 +354,10 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state) /* * Don't sleep if no wakeup sources are defined */ - if (wakeup_src == 0) + if (wakeup_src == 0) { + printk(KERN_ERR "Not suspending: no wakeup sources\n"); return; + } switch (state) { case PM_SUSPEND_STANDBY: @@ -446,15 +497,9 @@ static int pxa3xx_set_wake(unsigned int irq, unsigned int on) return 0; } - -static void pxa3xx_init_irq_pm(void) -{ - pxa_init_irq_set_wake(pxa3xx_set_wake); -} - #else static inline void pxa3xx_init_pm(void) {} -static inline void pxa3xx_init_irq_pm(void) {} +#define pxa3xx_set_wake NULL #endif void __init pxa3xx_init_irq(void) @@ -465,10 +510,8 @@ void __init pxa3xx_init_irq(void) value |= (1 << 6); __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); - pxa_init_irq_low(); - pxa_init_irq_high(); - pxa_init_irq_gpio(128); - pxa3xx_init_irq_pm(); + pxa_init_irq(56, pxa3xx_set_wake); + pxa_init_gpio(128, NULL); } /* @@ -490,11 +533,9 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa3xx_sysdev[] = { { - .id = 0, .cls = &pxa_irq_sysclass, }, { - .id = 1, - .cls = &pxa_irq_sysclass, + .cls = &pxa3xx_mfp_sysclass, }, { .cls = &pxa_gpio_sysclass, }, @@ -532,4 +573,4 @@ static int __init pxa3xx_init(void) return ret; } -subsys_initcall(pxa3xx_init); +postcore_initcall(pxa3xx_init); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f9d1b61e1185..34cd585075b0 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -26,6 +26,7 @@ #include <asm/mach-types.h> #include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/sharpsl.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 9e7773fca01c..62a02c3927c5 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -37,6 +37,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 745a4dc7acdd..7a7f5f947cc5 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -26,6 +26,7 @@ #include <asm/arch/sharpsl.h> #include <asm/arch/spitz.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f99112d50b41..6458f6d371d9 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/gpio.h> #include <asm/setup.h> #include <asm/memory.h> @@ -32,7 +33,9 @@ #include <asm/system.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> +#include <asm/arch/mfp-pxa25x.h> #include <asm/arch/irda.h> +#include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> @@ -47,6 +50,110 @@ #include "generic.h" #include "devices.h" +static unsigned long tosa_pin_config[] = { + GPIO78_nCS_2, /* Scoop */ + GPIO80_nCS_4, /* tg6393xb */ + GPIO33_nCS_5, /* Scoop */ + + // GPIO76 CARD_VCC_ON1 + + GPIO19_GPIO, /* Reset out */ + GPIO1_RST | WAKEUP_ON_EDGE_FALL, + + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */ + GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */ + GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */ + GPIO20_GPIO, /* EAR_IN */ + GPIO22_GPIO, /* On */ + + GPIO5_GPIO, /* USB_IN */ + GPIO32_GPIO, /* Pen IRQ */ + + GPIO7_GPIO, /* Jacket Detect */ + GPIO14_GPIO, /* BAT0_CRG */ + GPIO12_GPIO, /* BAT1_CRG */ + GPIO17_GPIO, /* BAT0_LOW */ + GPIO84_GPIO, /* BAT1_LOW */ + GPIO38_GPIO, /* BAT_LOCK */ + + GPIO11_3_6MHz, + GPIO15_GPIO, /* TC6393XB IRQ */ + GPIO18_RDY, + GPIO27_GPIO, /* LCD Sync */ + + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO9_GPIO, /* Detect */ + // GPIO10 nSD_INT + + /* CF */ + GPIO13_GPIO, /* CD_IRQ */ + GPIO21_GPIO, /* Main Slot IRQ */ + GPIO36_GPIO, /* Jacket Slot IRQ */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* AC97 */ + GPIO31_AC97_SYNC, + GPIO30_AC97_SDATA_OUT, + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + // GPIO79 nAUD_IRQ + + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO37_FFUART_DSR, + GPIO39_FFUART_TXD, + GPIO40_FFUART_DTR, + GPIO41_FFUART_RTS, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* IrDA */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Keybd */ + GPIO58_GPIO, + GPIO59_GPIO, + GPIO60_GPIO, + GPIO61_GPIO, + GPIO62_GPIO, + GPIO63_GPIO, + GPIO64_GPIO, + GPIO65_GPIO, + GPIO66_GPIO, + GPIO67_GPIO, + GPIO68_GPIO, + GPIO69_GPIO, + GPIO70_GPIO, + GPIO71_GPIO, + GPIO72_GPIO, + GPIO73_GPIO, + GPIO74_GPIO, + GPIO75_GPIO, + + /* SPI */ + GPIO81_SSP2_CLK_OUT, + GPIO82_SSP2_FRM_OUT, + GPIO83_SSP2_TXD, +}; + /* * SCOOP Device */ @@ -60,11 +167,10 @@ static struct resource tosa_scoop_resources[] = { static struct scoop_config tosa_scoop_setup = { .io_dir = TOSA_SCOOP_IO_DIR, - .io_out = TOSA_SCOOP_IO_OUT, - + .gpio_base = TOSA_SCOOP_GPIO_BASE, }; -struct platform_device tosascoop_device = { +static struct platform_device tosascoop_device = { .name = "sharp-scoop", .id = 0, .dev = { @@ -88,10 +194,10 @@ static struct resource tosa_scoop_jc_resources[] = { static struct scoop_config tosa_scoop_jc_setup = { .io_dir = TOSA_SCOOP_JC_IO_DIR, - .io_out = TOSA_SCOOP_JC_IO_OUT, + .gpio_base = TOSA_SCOOP_JC_GPIO_BASE, }; -struct platform_device tosascoop_jc_device = { +static struct platform_device tosascoop_jc_device = { .name = "sharp-scoop", .id = 1, .dev = { @@ -118,50 +224,16 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; -static void tosa_pcmcia_init(void) -{ - /* Setup default state of GPIO outputs - before we enable them as outputs. */ - GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | - GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | - GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | - GPIO_bit(GPIO53_nPCE_2); - - pxa_gpio_mode(GPIO48_nPOE_MD); - pxa_gpio_mode(GPIO49_nPWE_MD); - pxa_gpio_mode(GPIO50_nPIOR_MD); - pxa_gpio_mode(GPIO51_nPIOW_MD); - pxa_gpio_mode(GPIO55_nPREG_MD); - pxa_gpio_mode(GPIO56_nPWAIT_MD); - pxa_gpio_mode(GPIO57_nIOIS16_MD); - pxa_gpio_mode(GPIO52_nPCE_1_MD); - pxa_gpio_mode(GPIO53_nPCE_2_MD); - pxa_gpio_mode(GPIO54_pSKTSEL_MD); -} - static struct scoop_pcmcia_config tosa_pcmcia_config = { .devs = &tosa_pcmcia_scoop[0], .num_devs = 2, - .pcmcia_init = tosa_pcmcia_init, }; /* * USB Device Controller */ -static void tosa_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { - .udc_command = tosa_udc_command, + .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; @@ -175,19 +247,44 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void { int err; - /* setup GPIO for PXA25x MMC controller */ - pxa_gpio_mode(GPIO6_MMCCLK_MD); - pxa_gpio_mode(GPIO8_MMCCS0_MD); - pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); - tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); - if (err) + if (err) { printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + goto err_irq; + } + err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); + goto err_gpio_wp; + } + err = gpio_direction_input(TOSA_GPIO_SD_WP); + if (err) + goto err_gpio_wp_dir; + + err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_pwr; + } + err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0); + if (err) + goto err_gpio_pwr_dir; + + return 0; + +err_gpio_pwr_dir: + gpio_free(TOSA_GPIO_PWR_ON); +err_gpio_pwr: +err_gpio_wp_dir: + gpio_free(TOSA_GPIO_SD_WP); +err_gpio_wp: + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +err_irq: return err; } @@ -196,19 +293,21 @@ static void tosa_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 1); } else { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 0); } } static int tosa_mci_get_ro(struct device *dev) { - return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); + return gpio_get_value(TOSA_GPIO_SD_WP); } static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_PWR_ON); + gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); } @@ -223,21 +322,36 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static int tosa_irda_startup(struct device *dev) { - if (mode & IR_OFF) { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); - pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); - pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); - } else { - pxa_gpio_mode(GPIO47_STTXD_MD); - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + int ret; + + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); + if (ret) + return ret; + + ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); + if (ret) + gpio_free(TOSA_GPIO_IR_POWERDWN); + + return ret; } + +static void tosa_irda_shutdown(struct device *dev) +{ + gpio_free(TOSA_GPIO_IR_POWERDWN); +} + +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); } static struct pxaficp_platform_data tosa_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = tosa_irda_transceiver_mode, + .startup = tosa_irda_startup, + .shutdown = tosa_irda_shutdown, }; /* @@ -249,12 +363,28 @@ static struct platform_device tosakbd_device = { }; static struct gpio_keys_button tosa_gpio_keys[] = { + /* + * Two following keys are directly tied to "ON" button of tosa. Why? + * The first one can be used as a wakeup source, the second can't; + * also the first one is OR of ac_powered and on_button. + */ + { + .type = EV_PWR, + .code = KEY_RESERVED, + .gpio = TOSA_GPIO_POWERON, + .desc = "Poweron", + .wakeup = 1, + .active_low = 1, + }, { .type = EV_PWR, .code = KEY_SUSPEND, .gpio = TOSA_GPIO_ON_KEY, .desc = "On key", - .wakeup = 1, + /* + * can't be used as wakeup + * .wakeup = 1, + */ .active_low = 1, }, { @@ -291,9 +421,40 @@ static struct platform_device tosa_gpio_keys_device = { /* * Tosa LEDs */ +static struct gpio_led tosa_gpio_leds[] = { + { + .name = "tosa:amber:charge", + .default_trigger = "main-battery-charging", + .gpio = TOSA_GPIO_CHRG_ERR_LED, + }, + { + .name = "tosa:green:mail", + .default_trigger = "nand-disk", + .gpio = TOSA_GPIO_NOTE_LED, + }, + { + .name = "tosa:dual:wlan", + .default_trigger = "none", + .gpio = TOSA_GPIO_WLAN_LED, + }, + { + .name = "tosa:blue:bluetooth", + .default_trigger = "none", + .gpio = TOSA_GPIO_BT_LED, + }, +}; + +static struct gpio_led_platform_data tosa_gpio_leds_platform_data = { + .leds = tosa_gpio_leds, + .num_leds = ARRAY_SIZE(tosa_gpio_leds), +}; + static struct platform_device tosaled_device = { - .name = "tosa-led", - .id = -1, + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &tosa_gpio_leds_platform_data, + }, }; static struct platform_device *devices[] __initdata = { @@ -326,20 +487,13 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + gpio_set_wake(MFP_PIN_GPIO1, 1); + /* We can't pass to gpio-keys since it will drop the Reset altfunc */ + pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); - pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); - pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x00000000; - PGSR1 = 0x00FF0002; - PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; /* enable batt_fault */ @@ -348,6 +502,7 @@ static void __init tosa_init(void) pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f207fcd30cd7..931885d86b91 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -41,6 +41,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-gpio.h> #include <asm/arch/trizeps4.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index afd2cbfca0d9..dbb546216be1 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -26,6 +26,7 @@ #include <asm/arch/pxafb.h> #include <asm/arch/zylonite.h> #include <asm/arch/mmc.h> +#include <asm/arch/pxa27x_keypad.h> #include "generic.h" @@ -35,6 +36,8 @@ struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; int gpio_backlight; int gpio_eth_irq; +int wm9713_irq; + int lcd_id; int lcd_orientation; @@ -249,6 +252,71 @@ static void __init zylonite_init_mmc(void) static inline void zylonite_init_mmc(void) {} #endif +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) +static unsigned int zylonite_matrix_key_map[] = { + /* KEY(row, col, key_code) */ + KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D), + KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H), + KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L), + KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P), + KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T), + KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X), + KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z), + + KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3), + KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7), + KEY(4, 3, KEY_8), KEY(3, 4, KEY_9), + + KEY(4, 5, KEY_SPACE), + KEY(5, 3, KEY_KPASTERISK), /* * */ + KEY(5, 4, KEY_KPDOT), /* #" */ + + KEY(0, 7, KEY_UP), + KEY(1, 7, KEY_DOWN), + KEY(2, 7, KEY_LEFT), + KEY(3, 7, KEY_RIGHT), + KEY(2, 6, KEY_HOME), + KEY(3, 6, KEY_END), + KEY(6, 4, KEY_DELETE), + KEY(6, 6, KEY_BACK), + KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */ + + KEY(4, 6, KEY_ENTER), /* scroll push */ + KEY(5, 7, KEY_ENTER), /* keypad action */ + + KEY(0, 4, KEY_EMAIL), + KEY(5, 6, KEY_SEND), + KEY(4, 0, KEY_CALENDAR), + KEY(7, 6, KEY_RECORD), + KEY(6, 7, KEY_VOLUMEUP), + KEY(7, 7, KEY_VOLUMEDOWN), + + KEY(0, 6, KEY_F22), /* soft1 */ + KEY(1, 6, KEY_F23), /* soft2 */ + KEY(0, 3, KEY_AUX), /* contact */ +}; + +static struct pxa27x_keypad_platform_data zylonite_keypad_info = { + .matrix_key_rows = 8, + .matrix_key_cols = 8, + .matrix_key_map = zylonite_matrix_key_map, + .matrix_key_map_size = ARRAY_SIZE(zylonite_matrix_key_map), + + .enable_rotary0 = 1, + .rotary0_up_key = KEY_UP, + .rotary0_down_key = KEY_DOWN, + + .debounce_interval = 30, +}; + +static void __init zylonite_init_keypad(void) +{ + pxa_set_keypad_info(&zylonite_keypad_info); +} +#else +static inline void zylonite_init_keypad(void) {} +#endif + static void __init zylonite_init(void) { /* board-processor specific initialization */ @@ -265,6 +333,7 @@ static void __init zylonite_init(void) zylonite_init_lcd(); zylonite_init_mmc(); + zylonite_init_keypad(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 6ac04c09b0e9..324fb9daae28 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -21,7 +21,7 @@ #include <asm/arch/mfp-pxa300.h> #include <asm/arch/zylonite.h> -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#include "generic.h" /* PXA300/PXA310 common configurations */ static mfp_cfg_t common_mfp_cfg[] __initdata = { @@ -69,6 +69,9 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + /* WM9713 IRQ */ + GPIO26_GPIO, + /* Keypad */ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, @@ -203,6 +206,9 @@ void __init zylonite_pxa300_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); } if (cpu_is_pxa300()) { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index dfa79992b8ab..193d07903b06 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -21,7 +21,7 @@ #include <asm/arch/mfp-pxa320.h> #include <asm/arch/zylonite.h> -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#include "generic.h" static mfp_cfg_t mfp_cfg[] __initdata = { /* LCD */ @@ -68,6 +68,9 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + /* WM9713 IRQ */ + GPIO15_GPIO, + /* I2C */ GPIO32_I2C_SCL, GPIO33_I2C_SDA, @@ -190,5 +193,8 @@ void __init zylonite_pxa320_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } } diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 39b3bb7f1020..5ccde7cf39e8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -10,7 +10,6 @@ config MACH_REALVIEW_EB config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB - select CACHE_L2X0 help Enable support for the ARM11MPCore tile on the Realview platform. @@ -24,4 +23,18 @@ config REALVIEW_EB_ARM11MP_REVB kernel built with this option enabled is not compatible with other revisions of the ARM11MPCore tile. +config MACH_REALVIEW_PB11MP + bool "Support RealView/PB11MPCore platform" + select ARM_GIC + help + Include support for the ARM(R) RealView MPCore Platform Baseboard. + PB11MPCore is a platform with an on-board ARM11MPCore and has + support for PCI-E and Compact Flash. + +config MACH_REALVIEW_PB1176 + bool "Support RealView/PB1176 platform" + select ARM_GIC + help + Include support for the ARM(R) RealView ARM1176 Platform Baseboard. + endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index ca1e390c3c28..d2ae077431dd 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,5 +4,7 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o +obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o +obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 98aefc9f4df3..131990d196f5 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -109,22 +109,21 @@ static struct flash_platform_data realview_flash_data = { .set_vpp = realview_flash_set_vpp, }; -static struct resource realview_flash_resource = { - .start = REALVIEW_FLASH_BASE, - .end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - struct platform_device realview_flash_device = { .name = "armflash", .id = 0, .dev = { .platform_data = &realview_flash_data, }, - .num_resources = 1, - .resource = &realview_flash_resource, }; +int realview_flash_register(struct resource *res, u32 num) +{ + realview_flash_device.resource = res; + realview_flash_device.num_resources = num; + return platform_device_register(&realview_flash_device); +} + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, @@ -445,10 +444,10 @@ void realview_leds_event(led_event_t ledevt) /* * Where is the timer (VA)? */ -#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE) -#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20) -#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE) -#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20) +void __iomem *timer0_va_base; +void __iomem *timer1_va_base; +void __iomem *timer2_va_base; +void __iomem *timer3_va_base; /* * How long is the timer interval? @@ -475,7 +474,7 @@ static void timer_set_mode(enum clock_event_mode mode, switch(mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD); ctrl = TIMER_CTRL_PERIODIC; ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; @@ -491,16 +490,16 @@ static void timer_set_mode(enum clock_event_mode mode, ctrl = 0; } - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); + writel(ctrl, timer0_va_base + TIMER_CTRL); } static int timer_set_next_event(unsigned long evt, struct clock_event_device *unused) { - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); + unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL); - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); + writel(evt, timer0_va_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL); return 0; } @@ -536,7 +535,7 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &timer0_clockevent; /* clear the interrupt */ - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); + writel(1, timer0_va_base + TIMER_INTCLR); evt->event_handler(evt); @@ -551,7 +550,7 @@ static struct irqaction realview_timer_irq = { static cycle_t realview_get_cycles(void) { - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); + return ~readl(timer3_va_base + TIMER_VALUE); } static struct clocksource clocksource_realview = { @@ -566,11 +565,11 @@ static struct clocksource clocksource_realview = { static void __init realview_clocksource_init(void) { /* setup timer 0 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); + writel(0, timer3_va_base + TIMER_CTRL); + writel(0xffffffff, timer3_va_base + TIMER_LOAD); + writel(0xffffffff, timer3_va_base + TIMER_VALUE); writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); + timer3_va_base + TIMER_CTRL); clocksource_realview.mult = clocksource_khz2mult(1000, clocksource_realview.shift); @@ -607,10 +606,10 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Initialise to a known state (all timers off) */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - writel(0, TIMER3_VA_BASE + TIMER_CTRL); + writel(0, timer0_va_base + TIMER_CTRL); + writel(0, timer1_va_base + TIMER_CTRL); + writel(0, timer2_va_base + TIMER_CTRL); + writel(0, timer3_va_base + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 492a14c0d604..33dbbb41a663 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -55,8 +55,13 @@ extern void __iomem *gic_cpu_base_addr; extern void __iomem *twd_base_addr; extern unsigned int twd_size; #endif +extern void __iomem *timer0_va_base; +extern void __iomem *timer1_va_base; +extern void __iomem *timer2_va_base; +extern void __iomem *timer3_va_base; extern void realview_leds_event(led_event_t ledevt); extern void realview_timer_init(unsigned int timer_irq); +extern int realview_flash_register(struct resource *res, u32 num); #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index de2b7159557d..3e57428affee 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -15,11 +15,14 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <asm/hardware/arm_scu.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/scu.h> + extern void realview_secondary_startup(void); /* @@ -31,9 +34,15 @@ volatile int __cpuinitdata pen_release = -1; static unsigned int __init get_core_count(void) { unsigned int ncores; + void __iomem *scu_base = 0; + + if (machine_is_realview_eb() && core_tile_eb11mp()) + scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); + else if (machine_is_realview_pb11mp()) + scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); - if (machine_is_realview_eb() && core_tile_eb11mp()) { - ncores = __raw_readl(__io_address(REALVIEW_EB11MP_SCU_BASE) + SCU_CONFIG); + if (scu_base) { + ncores = __raw_readl(scu_base + SCU_CONFIG); ncores = (ncores & 0x03) + 1; } else ncores = 1; @@ -41,6 +50,26 @@ static unsigned int __init get_core_count(void) return ncores; } +/* + * Setup the SCU + */ +static void scu_enable(void) +{ + u32 scu_ctrl; + void __iomem *scu_base; + + if (machine_is_realview_eb() && core_tile_eb11mp()) + scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE); + else if (machine_is_realview_pb11mp()) + scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE); + else + BUG(); + + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base + SCU_CTRL); +} + static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) @@ -57,7 +86,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); + if (machine_is_realview_eb() && core_tile_eb11mp()) + gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); + else if (machine_is_realview_pb11mp()) + gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -198,7 +230,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in * realview_timer_init */ - if (machine_is_realview_eb() && core_tile_eb11mp()) + if ((machine_is_realview_eb() && core_tile_eb11mp()) || + machine_is_realview_pb11mp()) local_timer_setup(cpu); #endif @@ -210,11 +243,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpu_set(i, cpu_present_map); /* - * Do we need any more CPUs? If so, then let them know where - * to start. Note that, on modern versions of MILO, the "poke" - * doesn't actually do anything until each individual core is - * sent a soft interrupt to get it out of WFI + * Initialise the SCU if there are more than one CPU and let + * them know where to start. Note that, on modern versions of + * MILO, the "poke" doesn't actually do anything until each + * individual core is sent a soft interrupt to get it out of + * WFI */ - if (max_cpus > 1) + if (max_cpus > 1) { + scu_enable(); poke_milo(); + } } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 60d9eb810246..5782d83fd886 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -51,13 +51,13 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC_CPU_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -66,20 +66,20 @@ static struct map_desc realview_eb_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_TIMER0_1_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(REALVIEW_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_TIMER2_3_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE), .length = SZ_4K, .type = MT_DEVICE, }, #ifdef CONFIG_DEBUG_LL { - .virtual = IO_ADDRESS(REALVIEW_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_UART0_BASE), + .virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE), .length = SZ_4K, .type = MT_DEVICE, } @@ -136,12 +136,12 @@ static void __init realview_eb_map_io(void) /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } +#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } +#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } #define MPMC_DMA { 0, 0 } -#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define CLCD_DMA { 0, 0 } +#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } +#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } #define DMAC_DMA { 0, 0 } @@ -150,53 +150,53 @@ static void __init realview_eb_map_io(void) */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } #define SCTL_DMA { 0, 0 } -#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } -#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } +#define EB_WATCHDOG_DMA { 0, 0 } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } +#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } #define GPIO1_DMA { 0, 0 } -#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define RTC_DMA { 0, 0 } +#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } #define SCI_DMA { 7, 6 } -#define UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define UART0_DMA { 15, 14 } -#define UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define UART1_DMA { 13, 12 } -#define UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define UART2_DMA { 11, 10 } -#define UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } -#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define SSP_DMA { 9, 8 } +#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } +#define EB_UART0_DMA { 15, 14 } +#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } +#define EB_UART1_DMA { 13, 12 } +#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } +#define EB_UART2_DMA { 11, 10 } +#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } +#define EB_UART3_DMA { 0x86, 0x87 } +#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); +AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL); +AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data); AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); +AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL); AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL); AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); +AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -223,11 +223,16 @@ static struct amba_device *amba_devs[] __initdata = { /* * RealView EB platform devices */ +static struct resource realview_eb_flash_resource = { + .start = REALVIEW_EB_FLASH_BASE, + .end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; -static struct resource realview_eb_smc91x_resources[] = { +static struct resource realview_eb_eth_resources[] = { [0] = { - .start = REALVIEW_ETH_BASE, - .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .start = REALVIEW_EB_ETH_BASE, + .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -237,13 +242,36 @@ static struct resource realview_eb_smc91x_resources[] = { }, }; -static struct platform_device realview_eb_smc91x_device = { - .name = "smc91x", +static struct platform_device realview_eb_eth_device = { .id = 0, - .num_resources = ARRAY_SIZE(realview_eb_smc91x_resources), - .resource = realview_eb_smc91x_resources, + .num_resources = ARRAY_SIZE(realview_eb_eth_resources), + .resource = realview_eb_eth_resources, }; +/* + * Detect and register the correct Ethernet device. RealView/EB rev D + * platforms use the newer SMSC LAN9118 Ethernet chip + */ +static int eth_device_register(void) +{ + void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K); + u32 idrev; + + if (!eth_addr) + return -ENOMEM; + + idrev = readl(eth_addr + 0x50); + if ((idrev & 0xFFFF0000) == 0x01180000) + /* SMSC LAN9118 chip present */ + realview_eb_eth_device.name = "smc911x"; + else + /* SMSC 91C111 chip present */ + realview_eb_eth_device.name = "smc91x"; + + iounmap(eth_addr); + return platform_device_register(&realview_eb_eth_device); +} + static void __init gic_init_irq(void) { if (core_tile_eb11mp()) { @@ -263,14 +291,14 @@ static void __init gic_init_irq(void) #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB /* board GIC, secondary */ - gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64); - gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE)); + gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64); + gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif } else { /* board GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); + gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29); gic_cpu_init(0, gic_cpu_base_addr); } } @@ -301,14 +329,19 @@ static void realview_eb11mp_fixup(void) kmi1_device.irq[0] = IRQ_EB11MP_KMI1; /* platform devices */ - realview_eb_smc91x_resources[1].start = IRQ_EB11MP_ETH; - realview_eb_smc91x_resources[1].end = IRQ_EB11MP_ETH; + realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH; + realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH; } static void __init realview_eb_timer_init(void) { unsigned int timer_irq; + timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; + if (core_tile_eb11mp()) { #ifdef CONFIG_LOCAL_TIMERS twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE); @@ -332,16 +365,18 @@ static void __init realview_eb_init(void) if (core_tile_eb11mp()) { realview_eb11mp_fixup(); +#ifdef CONFIG_CACHE_L2X0 /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); +#endif } clk_register(&realview_clcd_clk); - platform_device_register(&realview_flash_device); - platform_device_register(&realview_eb_smc91x_device); + realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); + eth_device_register(); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; @@ -355,8 +390,8 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_UART0_BASE, - .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc, + .phys_io = REALVIEW_EB_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c new file mode 100644 index 000000000000..cf7f576a5860 --- /dev/null +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -0,0 +1,292 @@ +/* + * linux/arch/arm/mach-realview/realview_pb1176.c + * + * Copyright (C) 2008 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/icst307.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <asm/arch/board-pb1176.h> +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_pb1176_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB1176_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PB1176_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB1176_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init realview_pb1176_map_io(void) +{ + iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc)); +} + +/* + * RealView PB1176 AMBA devices + */ +#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PB1176_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } +#define PB1176_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PB1176_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } +#define PB1176_WATCHDOG_DMA { 0, 0 } +#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } +#define PB1176_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } +#define PB1176_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } +#define PB1176_UART0_DMA { 15, 14 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } +#define PB1176_UART1_DMA { 13, 12 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } +#define PB1176_UART2_DMA { 11, 10 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } +#define PB1176_UART3_DMA { 0x86, 0x87 } +#define PB1176_SSP_IRQ { IRQ_PB1176_SSP, NO_IRQ } +#define PB1176_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PB1176_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PB1176_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PB1176_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PB1176_CLCD, &clcd_plat_data); +//AMBA_DEVICE(dmac, "issp:30", PB1176_DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { +// &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB1176 platform devices + */ +static struct resource realview_pb1176_flash_resource = { + .start = REALVIEW_PB1176_FLASH_BASE, + .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource realview_pb1176_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PB1176_ETH_BASE, + .end = REALVIEW_PB1176_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PB1176_ETH, + .end = IRQ_PB1176_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_pb1176_smsc911x_device = { + .name = "smc911x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb1176_smsc911x_resources), + .resource = realview_pb1176_smsc911x_resources, +}; + +static void __init gic_init_irq(void) +{ + /* ARM1176 DevChip GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START); + gic_cpu_init(0, gic_cpu_base_addr); + + /* board GIC, secondary */ + gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START); + gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE)); + gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1); +} + +static void __init realview_pb1176_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20; + + realview_timer_init(IRQ_DC1176_TIMER0); +} + +static struct sys_timer realview_pb1176_timer = { + .init = realview_pb1176_timer_init, +}; + +static void __init realview_pb1176_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + /* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */ + l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); +#endif + + clk_register(&realview_clcd_clk); + + realview_flash_register(&realview_pb1176_flash_resource, 1); + platform_device_register(&realview_pb1176_smsc911x_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PB1176_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_pb1176_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pb1176_timer, + .init_machine = realview_pb1176_init, +MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c new file mode 100644 index 000000000000..f7ce1c5a178a --- /dev/null +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -0,0 +1,342 @@ +/* + * linux/arch/arm/mach-realview/realview_pb11mp.c + * + * Copyright (C) 2008 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/amba/bus.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/icst307.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> +#include <asm/mach/time.h> + +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_pb11mp_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TC11MP_L220_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_L220_BASE), + .length = SZ_8K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init realview_pb11mp_map_io(void) +{ + iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc)); +} + +/* + * RealView PB11MPCore AMBA devices + */ + +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } +#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } +#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } +#define PB11MP_SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } +#define PB11MP_CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } +#define DMAC_DMA { 0, 0 } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } +#define PB11MP_WATCHDOG_DMA { 0, 0 } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } +#define PB11MP_GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } +#define PB11MP_RTC_DMA { 0, 0 } +#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } +#define PB11MP_UART0_DMA { 15, 14 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } +#define PB11MP_UART1_DMA { 13, 12 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } +#define PB11MP_UART2_DMA { 11, 10 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } +#define PB11MP_UART3_DMA { 0x86, 0x87 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define PB11MP_SSP_DMA { 9, 8 } + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", PB11MP_UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", PB11MP_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", PB11MP_SSP, NULL); + +/* Primecells on the NEC ISSP chip */ +AMBA_DEVICE(clcd, "issp:20", PB11MP_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:30", DMAC, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +/* + * RealView PB11MPCore platform devices + */ +static struct resource realview_pb11mp_flash_resource[] = { + [0] = { + .start = REALVIEW_PB11MP_FLASH0_BASE, + .end = REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB11MP_FLASH1_BASE, + .end = REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource realview_pb11mp_smsc911x_resources[] = { + [0] = { + .start = REALVIEW_PB11MP_ETH_BASE, + .end = REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC11MP_ETH, + .end = IRQ_TC11MP_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device realview_pb11mp_smsc911x_device = { + .name = "smc911x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb11mp_smsc911x_resources), + .resource = realview_pb11mp_smsc911x_resources, +}; + +struct resource realview_pb11mp_cf_resources[] = { + [0] = { + .start = REALVIEW_PB11MP_CF_BASE, + .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = REALVIEW_PB11MP_CF_MEM_BASE, + .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = -1, /* FIXME: Find correct irq */ + .end = -1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_pb11mp_cf_device = { + .name = "compactflash", + .id = 0, + .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources), + .resource = realview_pb11mp_cf_resources, +}; + +static void __init gic_init_irq(void) +{ + unsigned int pldctrl; + + /* new irq mode with no DCC */ + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); + pldctrl |= 2 << 22; + writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); + + /* ARM11MPCore test chip GIC, primary */ + gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE); + gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29); + gic_cpu_init(0, gic_cpu_base_addr); + + /* board GIC, secondary */ + gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START); + gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); + gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); +} + +static void __init realview_pb11mp_timer_init(void) +{ + timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE); + timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20; + timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); + timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; + +#ifdef CONFIG_LOCAL_TIMERS + twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE); + twd_size = REALVIEW_TC11MP_TWD_SIZE; +#endif + realview_timer_init(IRQ_TC11MP_TIMER0_1); +} + +static struct sys_timer realview_pb11mp_timer = { + .init = realview_pb11mp_timer_init, +}; + +static void __init realview_pb11mp_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled + * Bits: .... ...0 0111 1001 0000 .... .... .... */ + l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); +#endif + + clk_register(&realview_clcd_clk); + + realview_flash_register(realview_pb11mp_flash_resource, + ARRAY_SIZE(realview_pb11mp_flash_resource)); + platform_device_register(&realview_pb11mp_smsc911x_device); + platform_device_register(&realview_i2c_device); + platform_device_register(&realview_pb11mp_cf_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_io = REALVIEW_PB11MP_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_pb11mp_map_io, + .init_irq = gic_init_irq, + .timer = &realview_pb11mp_timer, + .init_machine = realview_pb11mp_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index e2079cf9266f..cd3dc0834b3b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -97,6 +97,13 @@ config BAST_PC104_IRQ Say Y here to enable the PC104 IRQ routing on the Simtec BAST (EB2410ITX) +config MACH_TCT_HAMMER + bool "TCT Hammer Board" + select CPU_S3C2410 + help + Say Y here if you are using the TinCanTools Hammer Board + <http://www.tincantools.com> + config MACH_VR1000 bool "Thorcom VR1000" select PM_SIMTEC if PM diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 3e7a85594d9c..cabc13ce09e4 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -27,5 +27,6 @@ obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 66175471fff3..661a2358ac22 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/dm9000.h> @@ -236,6 +237,36 @@ static struct platform_device bast_device_nor = { /* NAND Flash on BAST board */ +#ifdef CONFIG_PM +static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) +{ + /* ensure that an nRESET is not generated on resume. */ + s3c2410_gpio_setpin(S3C2410_GPA21, 1); + s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT); + + return 0; +} + +static int bast_pm_resume(struct sys_device *sd) +{ + s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT); + return 0; +} + +#else +#define bast_pm_suspend NULL +#define bast_pm_resume NULL +#endif + +static struct sysdev_class bast_pm_sysclass = { + .name = "mach-bast", + .suspend = bast_pm_suspend, + .resume = bast_pm_resume, +}; + +static struct sys_device bast_pm_sysdev = { + .cls = &bast_pm_sysclass, +}; static int smartmedia_map[] = { 0 }; static int chip0_map[] = { 1 }; @@ -561,10 +592,10 @@ static void __init bast_map_io(void) { /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; @@ -586,6 +617,9 @@ static void __init bast_map_io(void) static void __init bast_init(void) { + sysdev_class_register(&bast_pm_sysclass); + sysdev_register(&bast_pm_sysdev); + s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c new file mode 100644 index 000000000000..d90d445ccfb4 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c + * + * Copyright (c) 2007 TinCanTools + * David Anders <danders@amltd.com> + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * @History: + * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by + * Ben Dooks <ben@simtec.co.uk> + * + ***********************************************************************/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/plat-s3c/regs-serial.h> +#include <asm/plat-s3c24xx/devs.h> +#include <asm/plat-s3c24xx/cpu.h> + +#ifdef CONFIG_MTD_PARTITIONS + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +static struct resource tct_hammer_nor_resource = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition tct_hammer_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "JFFS2", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data tct_hammer_flash_data = { + .width = 2, + .parts = tct_hammer_mtd_partitions, + .nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions), +}; + +static struct platform_device tct_hammer_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &tct_hammer_flash_data, + }, + .num_resources = 1, + .resource = &tct_hammer_nor_resource, +}; + +#endif + +static struct map_desc tct_hammer_iodesc[] __initdata = { +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + + +static struct platform_device *tct_hammer_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_usb, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, +#ifdef CONFIG_MTD_PARTITIONS + &tct_hammer_device_nor, +#endif +}; + +static void __init tct_hammer_map_io(void) +{ + s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); +} + +static void __init tct_hammer_init(void) +{ + platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); +} + +MACHINE_START(TCT_HAMMER, "TCT_HAMMER") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = tct_hammer_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = tct_hammer_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 3aade7b78fe5..c56423373ff3 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -393,7 +393,7 @@ static void __init vr1000_map_io(void) { /* initialise clock sources */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; s3c24xx_dclk1.parent = NULL; diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index abf1599c9f97..98a0de924c22 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -175,7 +175,7 @@ void __init s3c2412_init_clocks(int xtal) /* work out clock scalings */ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1); + hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); /* print brieft summary of clocks, etc */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 3d3dfa95db8e..47258915a2f9 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -413,10 +413,10 @@ static void __init anubis_map_io(void) { /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 78af7664988b..8a8acdbd072d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/sysdev.h> #include <linux/serial_core.h> +#include <linux/clk.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -344,10 +345,10 @@ static void __init osiris_map_io(void) /* initialise the clocks */ - s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.parent = &clk_upll; s3c24xx_dclk0.rate = 12*1000*1000; - s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.parent = &clk_upll; s3c24xx_dclk1.rate = 24*1000*1000; s3c24xx_clkout0.parent = &s3c24xx_dclk0; diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 7a61e8d33ab7..8e0244631d65 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 5c84c604ed86..0c2fa1c4fb4c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -139,37 +139,6 @@ unsigned long long sched_clock(void) return v; } -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - GPDR &= ~GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - gpio_set_value(gpio, value); - GPDR |= GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_output); - /* * Default power-off for SA1100 */ diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index f085d68e568e..793c2e6c991f 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -9,6 +9,7 @@ struct sys_timer; extern struct sys_timer sa1100_timer; extern void __init sa1100_map_io(void); extern void __init sa1100_init_irq(void); +extern void __init sa1100_init_gpio(void); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c new file mode 100644 index 000000000000..372f1f4f54a1 --- /dev/null +++ b/arch/arm/mach-sa1100/gpio.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-sa1100/gpio.c + * + * Generic SA-1100 GPIO handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/gpio.h> +#include <asm/hardware.h> +#include "generic.h" + +static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return GPLR & GPIO_GPIO(offset); +} + +static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + GPSR = GPIO_GPIO(offset); + else + GPCR = GPIO_GPIO(offset); +} + +static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) +{ + unsigned long flags; + + local_irq_save(flags); + GPDR &= ~GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned long flags; + + local_irq_save(flags); + sa1100_gpio_set(chip, offset, value); + GPDR |= GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static struct gpio_chip sa1100_gpio_chip = { + .label = "gpio", + .direction_input = sa1100_direction_input, + .direction_output = sa1100_direction_output, + .set = sa1100_gpio_set, + .get = sa1100_gpio_get, + .base = 0, + .ngpio = GPIO_MAX + 1, +}; + +void __init sa1100_init_gpio(void) +{ + gpiochip_add(&sa1100_gpio_chip); +} diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 3dc17d7bf38e..fa0403af7eec 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -347,4 +347,6 @@ void __init sa1100_init_irq(void) */ set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip); set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); + + sa1100_init_gpio(); } diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index c2677368d6af..a9799cb35b74 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -13,67 +13,69 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/timex.h> -#include <linux/signal.h> -#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/hardware.h> -#define RTC_DEF_DIVIDER (32768 - 1) -#define RTC_DEF_TRIM 0 +#define MIN_OSCR_DELTA 2 -static int sa1100_set_rtc(void) +static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) { - unsigned long current_time = xtime.tv_sec; + struct clock_event_device *c = dev_id; - if (RTSR & RTSR_ALE) { - /* make sure not to forward the clock over an alarm */ - unsigned long alarm = RTAR; - if (current_time >= alarm && alarm >= RCNR) - return -ERESTARTSYS; - } - RCNR = current_time; - return 0; -} + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + c->event_handler(c); -#ifdef CONFIG_NO_IDLE_HZ -static unsigned long initial_match; -static int match_posponed; -#endif + return IRQ_HANDLED; +} -static irqreturn_t -sa1100_timer_interrupt(int irq, void *dev_id) +static int +sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) { - unsigned int next_match; + unsigned long flags, next, oscr; -#ifdef CONFIG_NO_IDLE_HZ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - } -#endif + raw_local_irq_save(flags); + OIER |= OIER_E0; + next = OSCR + delta; + OSMR0 = next; + oscr = OSCR; + raw_local_irq_restore(flags); - /* - * Loop until we get ahead of the free running timer. - * This ensures an exact clock tick count and time accuracy. - * Since IRQs are disabled at this point, coherence between - * lost_ticks(updated in do_timer()) and the match reg value is - * ensured, hence we can use do_gettimeofday() from interrupt - * handlers. - */ - do { - timer_tick(); - OSSR = OSSR_M0; /* Clear match on timer 0 */ - next_match = (OSMR0 += LATCH); - } while ((signed long)(next_match - OSCR) <= 0); + return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; +} - return IRQ_HANDLED; +static void +sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + raw_local_irq_save(flags); + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + raw_local_irq_restore(flags); + break; + + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + } } -static struct irqaction sa1100_timer_irq = { - .name = "SA11xx Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = sa1100_timer_interrupt, +static struct clock_event_device ckevt_sa1100_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .cpumask = CPU_MASK_CPU0, + .set_next_event = sa1100_osmr0_set_next_event, + .set_mode = sa1100_osmr0_set_mode, }; static cycle_t sa1100_read_oscr(void) @@ -90,62 +92,34 @@ static struct clocksource cksrc_sa1100_oscr = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct irqaction sa1100_timer_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sa1100_ost0_interrupt, + .dev_id = &ckevt_sa1100_osmr0, +}; + static void __init sa1100_timer_init(void) { - unsigned long flags; - - set_rtc = sa1100_set_rtc; - OIER = 0; /* disable any timer interrupts */ OSSR = 0xf; /* clear status on all timers */ - setup_irq(IRQ_OST0, &sa1100_timer_irq); - local_irq_save(flags); - OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSMR0 = OSCR + LATCH; /* set initial match */ - local_irq_restore(flags); + + ckevt_sa1100_osmr0.mult = + div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift); + ckevt_sa1100_osmr0.max_delta_ns = + clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0); + ckevt_sa1100_osmr0.min_delta_ns = + clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1; cksrc_sa1100_oscr.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); - clocksource_register(&cksrc_sa1100_oscr); -} - -#ifdef CONFIG_NO_IDLE_HZ -static int sa1100_dyn_tick_enable_disable(void) -{ - /* nothing to do */ - return 0; -} - -static void sa1100_dyn_tick_reprogram(unsigned long ticks) -{ - if (ticks > 1) { - initial_match = OSMR0; - OSMR0 = initial_match + ticks * LATCH; - match_posponed = 1; - } -} + setup_irq(IRQ_OST0, &sa1100_timer_irq); -static irqreturn_t -sa1100_dyn_tick_handler(int irq, void *dev_id) -{ - if (match_posponed) { - match_posponed = 0; - OSMR0 = initial_match; - if ((signed long)(initial_match - OSCR) <= 0) - return sa1100_timer_interrupt(irq, dev_id); - } - return IRQ_NONE; + clocksource_register(&cksrc_sa1100_oscr); + clockevents_register_device(&ckevt_sa1100_osmr0); } -static struct dyn_tick_timer sa1100_dyn_tick = { - .enable = sa1100_dyn_tick_enable_disable, - .disable = sa1100_dyn_tick_enable_disable, - .reprogram = sa1100_dyn_tick_reprogram, - .handler = sa1100_dyn_tick_handler, -}; -#endif - #ifdef CONFIG_PM unsigned long osmr[4], oier; @@ -181,7 +155,4 @@ struct sys_timer sa1100_timer = { .init = sa1100_timer_init, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, -#ifdef CONFIG_NO_IDLE_HZ - .dyn_tick = &sa1100_dyn_tick, -#endif }; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 76348f060f27..746cbb7c8e95 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -18,6 +18,7 @@ config CPU_ARM610 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU + select CPU_PABRT_NOIFAR help The ARM610 is the successor to the ARM3 processor and was produced by VLSI Technology Inc. @@ -49,6 +50,7 @@ config CPU_ARM710 select CPU_CP15_MMU select CPU_COPY_V3 if MMU select CPU_TLB_V3 if MMU + select CPU_PABRT_NOIFAR help A 32-bit RISC microprocessor based on the ARM7 processor core designed by Advanced RISC Machines Ltd. The ARM710 is the @@ -64,6 +66,7 @@ config CPU_ARM720T default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X select CPU_32v4T select CPU_ABRT_LV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4 select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -113,6 +116,7 @@ config CPU_ARM920T default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200 select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -135,6 +139,7 @@ config CPU_ARM922T default y if ARCH_LH7A40X || ARCH_KS8695 select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -155,6 +160,7 @@ config CPU_ARM925T default y if ARCH_OMAP15XX select CPU_32v4T select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -175,6 +181,7 @@ config CPU_ARM926T default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI select CPU_32v5 select CPU_ABRT_EV5TJ + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU @@ -226,6 +233,7 @@ config CPU_ARM1020 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -244,6 +252,7 @@ config CPU_ARM1020E depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WT select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -257,6 +266,7 @@ config CPU_ARM1022 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV4T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -275,6 +285,7 @@ config CPU_ARM1026 depends on ARCH_INTEGRATOR select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU # can probably do better @@ -293,6 +304,7 @@ config CPU_SA110 select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -314,6 +326,7 @@ config CPU_SA1100 default y select CPU_32v4 select CPU_ABRT_EV4 + select CPU_PABRT_NOIFAR select CPU_CACHE_V4WB select CPU_CACHE_VIVT select CPU_CP15_MMU @@ -326,6 +339,7 @@ config CPU_XSCALE default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_TLB_V4WBI if MMU @@ -345,10 +359,11 @@ config CPU_XSC3 # Feroceon config CPU_FEROCEON bool - depends on ARCH_ORION + depends on ARCH_ORION5X default y select CPU_32v5 select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR select CPU_CACHE_VIVT select CPU_CP15_MMU select CPU_COPY_V4WB if MMU @@ -366,11 +381,12 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 default y if ARCH_MX3 default y if ARCH_MSM7X00A select CPU_32v6 select CPU_ABRT_EV6 + select CPU_PABRT_NOIFAR select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -393,10 +409,11 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" - depends on ARCH_INTEGRATOR + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 + select CPU_PABRT_IFAR select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU @@ -458,6 +475,12 @@ config CPU_ABRT_EV6 config CPU_ABRT_EV7 bool +config CPU_PABRT_IFAR + bool + +config CPU_PABRT_NOIFAR + bool + # The cache model config CPU_CACHE_V3 bool @@ -572,6 +595,13 @@ config ARM_THUMB If you don't know what this all is, saying Y is a safe choice. +config ARM_THUMBEE + bool "Enable ThumbEE CPU extension" + depends on CPU_V7 + help + Say Y here if you have a CPU with the ThumbEE extension and code to + make use of it. Say N for code that can run on CPUs without ThumbEE. + config CPU_BIG_ENDIAN bool "Build big-endian kernel" depends on ARCH_SUPPORTS_BIG_ENDIAN @@ -671,5 +701,9 @@ config OUTER_CACHE default n config CACHE_L2X0 - bool + bool "Enable the L2x0 outer cache controller" + depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 + default y select OUTER_CACHE + help + This option enables the L2x0 PrimeCell. diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index ec00f26bffa4..b657f1719af0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -48,8 +48,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(node) { pg_data_t *n = NODE_DATA(node); struct page *map = n->node_mem_map - n->node_start_pfn; diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 700c04d6996e..32fd7ea533f2 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -478,6 +478,7 @@ arm1020_processor_functions: .word cpu_arm1020_dcache_clean_area .word cpu_arm1020_switch_mm .word cpu_arm1020_set_pte_ext + .word pabort_noifar .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 1cc206ab5eae..fe2b0ae70274 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -459,6 +459,7 @@ arm1020e_processor_functions: .word cpu_arm1020e_dcache_clean_area .word cpu_arm1020e_switch_mm .word cpu_arm1020e_set_pte_ext + .word pabort_noifar .size arm1020e_processor_functions, . - arm1020e_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index aff0ea08e2f8..06dde678e19d 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -442,6 +442,7 @@ arm1022_processor_functions: .word cpu_arm1022_dcache_clean_area .word cpu_arm1022_switch_mm .word cpu_arm1022_set_pte_ext + .word pabort_noifar .size arm1022_processor_functions, . - arm1022_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 65e43a109085..f5506e6e681e 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -437,6 +437,7 @@ arm1026_processor_functions: .word cpu_arm1026_dcache_clean_area .word cpu_arm1026_switch_mm .word cpu_arm1026_set_pte_ext + .word pabort_noifar .size arm1026_processor_functions, . - arm1026_processor_functions .section .rodata diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 123a7dc7a433..14b6a95c8d45 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -300,6 +300,7 @@ ENTRY(arm6_processor_functions) .word cpu_arm6_dcache_clean_area .word cpu_arm6_switch_mm .word cpu_arm6_set_pte_ext + .word pabort_noifar .size arm6_processor_functions, . - arm6_processor_functions /* @@ -316,6 +317,7 @@ ENTRY(arm7_processor_functions) .word cpu_arm7_dcache_clean_area .word cpu_arm7_switch_mm .word cpu_arm7_set_pte_ext + .word pabort_noifar .size arm7_processor_functions, . - arm7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index dc763be43362..ca5e7aac2da7 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -205,6 +205,7 @@ ENTRY(arm720_processor_functions) .word cpu_arm720_dcache_clean_area .word cpu_arm720_switch_mm .word cpu_arm720_set_pte_ext + .word pabort_noifar .size arm720_processor_functions, . - arm720_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 75c945ed6c4d..0170d4f466ea 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -424,6 +424,7 @@ arm920_processor_functions: .word cpu_arm920_dcache_clean_area .word cpu_arm920_switch_mm .word cpu_arm920_set_pte_ext + .word pabort_noifar .size arm920_processor_functions, . - arm920_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index ffb751b877ff..b7952493d404 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -428,6 +428,7 @@ arm922_processor_functions: .word cpu_arm922_dcache_clean_area .word cpu_arm922_switch_mm .word cpu_arm922_set_pte_ext + .word pabort_noifar .size arm922_processor_functions, . - arm922_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 44c2c997819f..e2988eba4cf6 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -491,6 +491,7 @@ arm925_processor_functions: .word cpu_arm925_dcache_clean_area .word cpu_arm925_switch_mm .word cpu_arm925_set_pte_ext + .word pabort_noifar .size arm925_processor_functions, . - arm925_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 194ef48968e6..62f7d1dfe016 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -444,6 +444,7 @@ arm926_processor_functions: .word cpu_arm926_dcache_clean_area .word cpu_arm926_switch_mm .word cpu_arm926_set_pte_ext + .word pabort_noifar .size arm926_processor_functions, . - arm926_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index fa0dc7e6f0ea..2f169b28e938 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -430,6 +430,7 @@ feroceon_processor_functions: .word cpu_feroceon_dcache_clean_area .word cpu_feroceon_switch_mm .word cpu_feroceon_set_pte_ext + .word pabort_noifar .size feroceon_processor_functions, . - feroceon_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 6e226e12989f..4db3d6299a2b 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -223,6 +223,7 @@ ENTRY(sa110_processor_functions) .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm .word cpu_sa110_set_pte_ext + .word pabort_noifar .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 9afb11d089fe..3cdef043760f 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -238,6 +238,7 @@ ENTRY(sa1100_processor_functions) .word cpu_sa1100_dcache_clean_area .word cpu_sa1100_switch_mm .word cpu_sa1100_set_pte_ext + .word pabort_noifar .size sa1100_processor_functions, . - sa1100_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index eb42e5b94863..bf760ea2f789 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -17,10 +17,6 @@ #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> -#ifdef CONFIG_SMP -#include <asm/hardware/arm_scu.h> -#endif - #include "proc-macros.S" #define D_CACHE_LINE_SIZE 32 @@ -187,20 +183,10 @@ cpu_v6_name: */ __v6_setup: #ifdef CONFIG_SMP - /* Set up the SCU on core 0 only */ - mrc p15, 0, r0, c0, c0, 5 @ CPU core number - ands r0, r0, #15 - ldreq r0, =SCU_BASE - ldreq r5, [r0, #SCU_CTRL] - orreq r5, r5, #1 - streq r5, [r0, #SCU_CTRL] - -#ifndef CONFIG_CPU_DCACHE_DISABLE mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode orr r0, r0, #0x20 mcr p15, 0, r0, c1, c0, 1 #endif -#endif mov r0, #0 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache @@ -240,6 +226,7 @@ ENTRY(v6_processor_functions) .word cpu_v6_dcache_clean_area .word cpu_v6_switch_mm .word cpu_v6_set_pte_ext + .word pabort_noifar .size v6_processor_functions, . - v6_processor_functions .type cpu_arch_name, #object diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index e0acc5ae6f6f..a1d7331cd64c 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -212,6 +212,7 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext + .word pabort_ifar .size v7_processor_functions, . - v7_processor_functions .type cpu_arch_name, #object diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 016690b9d564..1a6d89823dff 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -534,6 +534,7 @@ ENTRY(xscale_processor_functions) .word cpu_xscale_dcache_clean_area .word cpu_xscale_switch_mm .word cpu_xscale_set_pte_ext + .word pabort_noifar .size xscale_processor_functions, . - xscale_processor_functions .section ".rodata" diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 98d01517b563..d9bc15a69e5d 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -24,6 +24,7 @@ #include <asm/hardware.h> #include <asm/mach/pci.h> #include <asm/hardware/iop3xx.h> +#include <asm/mach-types.h> // #define DEBUG @@ -209,8 +210,11 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) res[1].flags = IORESOURCE_MEM; request_resource(&iomem_resource, &res[1]); - sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; - sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA; + /* + * Use whatever translation is already setup. + */ + sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; + sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; sys->resource[0] = &res[0]; sys->resource[1] = &res[1]; @@ -250,11 +254,11 @@ void __init iop3xx_atu_setup(void) *IOP3XX_IATVR2 = PHYS_OFFSET; /* Outbound window 0 */ - *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_PA; + *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA; *IOP3XX_OUMWTVR0 = 0; /* Outbound window 1 */ - *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE; + *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE; *IOP3XX_OUMWTVR1 = 0; /* BAR 3 ( Disabled ) */ @@ -265,7 +269,7 @@ void __init iop3xx_atu_setup(void) /* Setup the I/O Bar */ - *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_PA;; + *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA; /* Enable inbound and outbound cycles */ @@ -322,34 +326,59 @@ void __init iop3xx_atu_disable(void) /* Flag to determine whether the ATU is initialized and the PCI bus scanned */ int init_atu; -void __init iop3xx_pci_preinit(void) +int iop3xx_get_init_atu(void) { + /* check if default has been overridden */ + if (init_atu != IOP3XX_INIT_ATU_DEFAULT) + return init_atu; + else + return IOP3XX_INIT_ATU_DISABLE; +} + +static void __init iop3xx_atu_debug(void) { - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { - iop3xx_atu_disable(); - iop3xx_atu_setup(); - } + DBG("PCI: Intel IOP3xx PCI init.\n"); + DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n", + *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0); + DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n", + *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1); + DBG("PCI: Outbound IO window: PCI 0x%08x\n", + *IOP3XX_OIOWTVR); + + DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); + DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n", + *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1); + DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); + DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); + + DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", + 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); - DBG("PCI: Intel 803xx PCI init code.\n"); DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); - DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n", - *IOP3XX_OMWTVR0, - *IOP3XX_OIOWTVR); DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); - DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n", - *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); - DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0); - DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n", - *IOP3XX_IABAR1, *IOP3XX_IALR1); - DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n", - *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); - DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n", - *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); - DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n", - *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); } +/* for platforms that might be host-bus-adapters */ +void __init iop3xx_pci_preinit_cond(void) +{ + if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { + iop3xx_atu_disable(); + iop3xx_atu_setup(); + iop3xx_atu_debug(); + } +} + +void __init iop3xx_pci_preinit(void) +{ + iop3xx_atu_disable(); + iop3xx_atu_setup(); + iop3xx_atu_debug(); +} + /* allow init_atu to be user overridden */ static int __init iop3xx_init_atu_setup(char *str) { diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 03a65c0dfb60..bb6e12738fb3 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,7 +4,7 @@ menu "Freescale MXC Implementations" choice prompt "MXC/iMX System Type" - default 0 + default ARCH_MX3 config ARCH_MX3 bool "MX3-based" diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 66ad9c2b6d64..f96dc0362068 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -4,7 +4,3 @@ # Common support obj-y := irq.o - -obj-m := -obj-n := -obj- := diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 87d253bc3d3c..2ad5a6917b3f 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -19,21 +19,13 @@ #include <asm/mach/irq.h> #include <asm/arch/common.h> -/*! - * Disable interrupt number "irq" in the AVIC - * - * @param irq interrupt source number - */ +/* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { __raw_writel(irq, AVIC_INTDISNUM); } -/*! - * Enable interrupt number "irq" in the AVIC - * - * @param irq interrupt source number - */ +/* Enable interrupt number "irq" in the AVIC */ static void mxc_unmask_irq(unsigned int irq) { __raw_writel(irq, AVIC_INTENNUM); @@ -45,7 +37,7 @@ static struct irq_chip mxc_avic_chip = { .unmask = mxc_unmask_irq, }; -/*! +/* * This function initializes the AVIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile new file mode 100644 index 000000000000..198f3dde2be3 --- /dev/null +++ b/arch/arm/plat-orion/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := irq.o pcie.o time.o +obj-m := +obj-n := +obj- := diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c new file mode 100644 index 000000000000..c5b669d234bc --- /dev/null +++ b/arch/arm/plat-orion/irq.c @@ -0,0 +1,64 @@ +/* + * arch/arm/plat-orion/irq.c + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/plat-orion/irq.h> + +static void orion_irq_mask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask &= ~(1 << (irq & 31)); + writel(mask, maskaddr); +} + +static void orion_irq_unmask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask |= 1 << (irq & 31); + writel(mask, maskaddr); +} + +static struct irq_chip orion_irq_chip = { + .name = "orion_irq", + .ack = orion_irq_mask, + .mask = orion_irq_mask, + .unmask = orion_irq_unmask, +}; + +void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) +{ + unsigned int i; + + /* + * Mask all interrupts initially. + */ + writel(0, maskaddr); + + /* + * Register IRQ sources. + */ + for (i = 0; i < 32; i++) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &orion_irq_chip); + set_irq_chip_data(irq, maskaddr); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c new file mode 100644 index 000000000000..abfda53f1800 --- /dev/null +++ b/arch/arm/plat-orion/pcie.c @@ -0,0 +1,245 @@ +/* + * arch/arm/plat-orion/pcie.c + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/plat-orion/pcie.h> + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + ((n - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_DEV_OFFS 20 +#define PCIE_STAT_DEV_MASK 0x1f +#define PCIE_STAT_BUS_OFFS 8 +#define PCIE_STAT_BUS_MASK 0xff +#define PCIE_STAT_LINK_DOWN 1 + + +u32 __init orion_pcie_dev_id(void __iomem *base) +{ + return readl(base + PCIE_DEV_ID_OFF) >> 16; +} + +u32 __init orion_pcie_rev(void __iomem *base) +{ + return readl(base + PCIE_DEV_REV_OFF) & 0xff; +} + +int orion_pcie_link_up(void __iomem *base) +{ + return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +int orion_pcie_get_local_bus_nr(void __iomem *base) +{ + u32 stat = readl(base + PCIE_STAT_OFF); + + return (stat >> PCIE_STAT_BUS_OFFS) & PCIE_STAT_BUS_MASK; +} + +void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr) +{ + u32 stat; + + stat = readl(base + PCIE_STAT_OFF); + stat &= ~(PCIE_STAT_BUS_MASK << PCIE_STAT_BUS_OFFS); + stat |= nr << PCIE_STAT_BUS_OFFS; + writel(stat, base + PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void __init orion_pcie_setup_wins(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u32 size; + int i; + + /* + * First, disable and clear BARs and windows. + */ + for (i = 1; i <= 2; i++) { + writel(0, base + PCIE_BAR_CTRL_OFF(i)); + writel(0, base + PCIE_BAR_LO_OFF(i)); + writel(0, base + PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + writel(0, base + PCIE_WIN04_CTRL_OFF(i)); + writel(0, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + } + + writel(0, base + PCIE_WIN5_CTRL_OFF); + writel(0, base + PCIE_WIN5_BASE_OFF); + writel(0, base + PCIE_WIN5_REMAP_OFF); + + /* + * Setup windows for DDR banks. Count total DDR size on the fly. + */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + + writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* + * Setup BAR[1] to all DRAM banks. + */ + writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1)); + writel(0, base + PCIE_BAR_HI_OFF(1)); + writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1)); +} + +void __init orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u16 cmd; + u32 mask; + + /* + * Point PCIe unit MBUS decode windows to DRAM space. + */ + orion_pcie_setup_wins(base, dram); + + /* + * Master + slave enable. + */ + cmd = readw(base + PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + writew(cmd, base + PCIE_CMD_OFF); + + /* + * Enable interrupt lines A-D. + */ + mask = readl(base + PCIE_MASK_OFF); + mask |= 0x0f000000; + writel(mask, base + PCIE_MASK_OFF); +} + +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (bus->number != orion_pcie_get_local_bus_nr(base) || + PCI_FUNC(devfn) != 0) + *val = readl(base + PCIE_HEADER_LOG_4_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + *val = readl(wa_base + (PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where))); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + if (size == 4) { + writel(val, base + PCIE_CONF_DATA_OFF); + } else if (size == 2) { + writew(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else if (size == 1) { + writeb(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + return ret; +} diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c new file mode 100644 index 000000000000..28b5285446e8 --- /dev/null +++ b/arch/arm/plat-orion/time.c @@ -0,0 +1,203 @@ +/* + * arch/arm/plat-orion/time.c + * + * Marvell Orion SoC timer handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Timer 0 is used as free-running clocksource, while timer 1 is + * used as clock_event_device. + */ + +#include <linux/kernel.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/mach/time.h> +#include <asm/arch/hardware.h> + +/* + * Number of timer ticks per jiffy. + */ +static u32 ticks_per_jiffy; + + +/* + * Timer block registers. + */ +#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) +#define TIMER0_EN 0x0001 +#define TIMER0_RELOAD_EN 0x0002 +#define TIMER1_EN 0x0004 +#define TIMER1_RELOAD_EN 0x0008 +#define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010) +#define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014) +#define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018) +#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c) + + +/* + * Clocksource handling. + */ +static cycle_t orion_clksrc_read(void) +{ + return 0xffffffff - readl(TIMER0_VAL); +} + +static struct clocksource orion_clksrc = { + .name = "orion_clocksource", + .shift = 20, + .rating = 300, + .read = orion_clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + + +/* + * Clockevent handling. + */ +static int +orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + if (delta == 0) + return -ETIME; + + local_irq_save(flags); + + /* + * Clear and enable clockevent timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + u = readl(BRIDGE_MASK); + u |= BRIDGE_INT_TIMER1; + writel(u, BRIDGE_MASK); + + /* + * Setup new clockevent timer value. + */ + writel(delta, TIMER1_VAL); + + /* + * Enable the timer. + */ + u = readl(TIMER_CTRL); + u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; + writel(u, TIMER_CTRL); + + local_irq_restore(flags); + + return 0; +} + +static void +orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + local_irq_save(flags); + if (mode == CLOCK_EVT_MODE_PERIODIC) { + /* + * Setup timer to fire at 1/HZ intervals. + */ + writel(ticks_per_jiffy - 1, TIMER1_RELOAD); + writel(ticks_per_jiffy - 1, TIMER1_VAL); + + /* + * Enable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * Enable timer. + */ + u = readl(TIMER_CTRL); + writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL); + } else { + /* + * Disable timer. + */ + u = readl(TIMER_CTRL); + writel(u & ~TIMER1_EN, TIMER_CTRL); + + /* + * Disable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * ACK pending timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + } + local_irq_restore(flags); +} + +static struct clock_event_device orion_clkevt = { + .name = "orion_tick", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 300, + .cpumask = CPU_MASK_CPU0, + .set_next_event = orion_clkevt_next_event, + .set_mode = orion_clkevt_mode, +}; + +static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) +{ + /* + * ACK timer interrupt and call event handler. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + orion_clkevt.event_handler(&orion_clkevt); + + return IRQ_HANDLED; +} + +static struct irqaction orion_timer_irq = { + .name = "orion_tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = orion_timer_interrupt +}; + +void __init orion_time_init(unsigned int irq, unsigned int tclk) +{ + u32 u; + + ticks_per_jiffy = (tclk + HZ/2) / HZ; + + + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0xffffffff, TIMER0_VAL); + writel(0xffffffff, TIMER0_RELOAD); + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); + u = readl(TIMER_CTRL); + writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); + orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); + clocksource_register(&orion_clksrc); + + + /* + * Setup clockevent timer (interrupt-driven.) + */ + setup_irq(irq, &orion_timer_irq); + orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); + orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt); + orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt); + clockevents_register_device(&orion_clkevt); +} diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 99a44746f8f2..d84167fb33b1 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -332,6 +332,58 @@ static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) return 0; } +static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) +{ + unsigned long div; + + if ((rate == 0) || !clk->parent) + return 0; + + div = clk_get_rate(clk->parent) / rate; + if (div < 2) + div = 2; + else if (div > 16) + div = 16; + + return div; +} + +static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return 0; + + return clk_get_rate(clk->parent) / div; +} + +static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return -EINVAL; + + if (clk == &s3c24xx_dclk0) { + mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | + S3C2410_DCLKCON_DCLK0_CMP_MASK; + data = S3C2410_DCLKCON_DCLK0_DIV(div) | + S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); + } else if (clk == &s3c24xx_dclk1) { + mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | + S3C2410_DCLKCON_DCLK1_CMP_MASK; + data = S3C2410_DCLKCON_DCLK1_DIV(div) | + S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); + } else + return -EINVAL; + + clk->rate = clk_get_rate(clk->parent) / div; + __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), + S3C24XX_DCLKCON); + return clk->rate; +} static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) { @@ -378,6 +430,8 @@ struct clk s3c24xx_dclk0 = { .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, }; struct clk s3c24xx_dclk1 = { @@ -386,6 +440,8 @@ struct clk s3c24xx_dclk1 = { .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, }; struct clk s3c24xx_clkout0 = { diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index f513ab083b8f..f5699cadb0c3 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -28,15 +28,19 @@ #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/delay.h> +#include <asm/cacheflush.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/arch/system-reset.h> + #include <asm/arch/regs-gpio.h> #include <asm/plat-s3c/regs-serial.h> @@ -203,6 +207,27 @@ static unsigned long s3c24xx_read_idcode_v4(void) #endif } +/* Hook for arm_pm_restart to ensure we execute the reset code + * with the caches enabled. It seems at least the S3C2440 has a problem + * resetting if there is bus activity interrupted by the reset. + */ +static void s3c24xx_pm_restart(char mode) +{ + if (mode != 's') { + unsigned long flags; + + local_irq_save(flags); + __cpuc_flush_kern_all(); + __cpuc_flush_user_all(); + + arch_reset(mode); + local_irq_restore(flags); + } + + /* fallback, or unhandled */ + arm_machine_restart(mode); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { unsigned long idcode = 0x0; @@ -230,6 +255,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) panic("Unsupported S3C24XX CPU"); } + arm_pm_restart = s3c24xx_pm_restart; + (cpu->map_io)(mach_desc, size); } diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 7ed58c0c24c2..207a8b5a0c4a 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Jan 26 14:45:34 2008 +# Last update: Sat Apr 19 11:23:38 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -381,13 +381,13 @@ ks8695p ARCH_KS8695P KS8695P 363 se4000 ARCH_SE4000 SE4000 364 quadriceps ARCH_QUADRICEPS QUADRICEPS 365 bronco ARCH_BRONCO BRONCO 366 -esl_wireless_tab ARCH_ESL_WIRELESS_TABLETESL_WIRELESS_TABLET 367 +esl_wireless_tab ARCH_ESL_WIRELESS_TAB ESL_WIRELESS_TAB 367 esl_sofcomp ARCH_ESL_SOFCOMP ESL_SOFCOMP 368 s5c7375 ARCH_S5C7375 S5C7375 369 spearhead ARCH_SPEARHEAD SPEARHEAD 370 pantera ARCH_PANTERA PANTERA 371 prayoglite ARCH_PRAYOGLITE PRAYOGLITE 372 -gumstix ARCH_GUMSTIK GUMSTIK 373 +gumstix ARCH_GUMSTIX GUMSTIX 373 rcube ARCH_RCUBE RCUBE 374 rea_olv ARCH_REA_OLV REA_OLV 375 pxa_iphone ARCH_PXA_IPHONE PXA_IPHONE 376 @@ -1463,7 +1463,7 @@ artemis MACH_ARTEMIS ARTEMIS 1462 htctitan MACH_HTCTITAN HTCTITAN 1463 qranium MACH_QRANIUM QRANIUM 1464 adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 -adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466 +adx_medcom MACH_ADX_MEDINET ADX_MEDINET 1466 bboard MACH_BBOARD BBOARD 1467 cambria MACH_CAMBRIA CAMBRIA 1468 mt7xxx MACH_MT7XXX MT7XXX 1469 @@ -1611,3 +1611,112 @@ kb9263 MACH_KB9263 KB9263 1612 mt7108 MACH_MT7108 MT7108 1613 smtr2440 MACH_SMTR2440 SMTR2440 1614 manao MACH_MANAO MANAO 1615 +cm_x300 MACH_CM_X300 CM_X300 1616 +gulfstream_kp MACH_GULFSTREAM_KP GULFSTREAM_KP 1617 +lanreadyfn522 MACH_LANREADYFN522 LANREADYFN522 1618 +arma37 MACH_ARMA37 ARMA37 1619 +mendel MACH_MENDEL MENDEL 1620 +pelco_iliad MACH_PELCO_ILIAD PELCO_ILIAD 1621 +unit2p MACH_UNIT2P UNIT2P 1622 +inc20otter MACH_INC20OTTER INC20OTTER 1623 +at91sam9g20ek MACH_AT91SAM9G20EK AT91SAM9G20EK 1624 +sc_ge2 MACH_STORCENTER STORCENTER 1625 +smdk6410 MACH_SMDK6410 SMDK6410 1626 +u300 MACH_U300 U300 1627 +u500 MACH_U500 U500 1628 +ds9260 MACH_DS9260 DS9260 1629 +riverrock MACH_RIVERROCK RIVERROCK 1630 +scibath MACH_SCIBATH SCIBATH 1631 +at91sam7se MACH_AT91SAM7SE512EK AT91SAM7SE512EK 1632 +wrt350n_v2 MACH_WRT350N_V2 WRT350N_V2 1633 +multimedia MACH_MULTIMEDIA MULTIMEDIA 1634 +marvin MACH_MARVIN MARVIN 1635 +x500 MACH_X500 X500 1636 +awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637 +palermoc MACH_PALERMOC PALERMOC 1638 +omap_ldp MACH_OMAP_LDP OMAP_LDP 1639 +ip500 MACH_IP500 IP500 1640 +mx35ads MACH_MACH_MX35ADS MACH_MX35ADS 1641 +ase2 MACH_ASE2 ASE2 1642 +mx35evb MACH_MX35EVB MX35EVB 1643 +aml_m8050 MACH_AML_M8050 AML_M8050 1644 +mx35_3ds MACH_MX35_3DS MX35_3DS 1645 +mars MACH_MARS MARS 1646 +ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647 +badger MACH_BADGER BADGER 1648 +trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 +trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 +marlin MACH_MARLIN MARLIN 1651 +ts7800 MACH_TS7800 TS7800 1652 +hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653 +at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654 +ne1board MACH_NE1BOARD NE1BOARD 1655 +zante MACH_ZANTE ZANTE 1656 +sffsdr MACH_SFFSDR SFFSDR 1657 +tw2662 MACH_TW2662 TW2662 1658 +vf10xx MACH_VF10XX VF10XX 1659 +zoran43xx MACH_ZORAN43XX ZORAN43XX 1660 +sonix926 MACH_SONIX926 SONIX926 1661 +celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662 +cc9m2443 MACH_CC9M2443 CC9M2443 1663 +tw5334 MACH_TW5334 TW5334 1664 +omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665 +nal_hlite MACH_NAL_HLITE NAL_HLITE 1666 +htcvogue MACH_HTCVOGUE HTCVOGUE 1667 +smartweb MACH_SMARTWEB SMARTWEB 1668 +mv86xx MACH_MV86XX MV86XX 1669 +mv87xx MACH_MV87XX MV87XX 1670 +songyoungho MACH_SONGYOUNGHO SONGYOUNGHO 1671 +younghotema MACH_YOUNGHOTEMA YOUNGHOTEMA 1672 +pcm037 MACH_PCM037 PCM037 1673 +mmvp MACH_MMVP MMVP 1674 +mmap MACH_MMAP MMAP 1675 +ptid2410 MACH_PTID2410 PTID2410 1676 +james_926 MACH_JAMES_926 JAMES_926 1677 +fm6000 MACH_FM6000 FM6000 1678 +db88f6281_bp MACH_DB88F6281_BP DB88F6281_BP 1680 +rd88f6192_nas MACH_RD88F6192_NAS RD88F6192_NAS 1681 +rd88f6281 MACH_RD88F6281 RD88F6281 1682 +db78x00_bp MACH_DB78X00_BP DB78X00_BP 1683 +smdk2416 MACH_SMDK2416 SMDK2416 1685 +oce_spider_si MACH_OCE_SPIDER_SI OCE_SPIDER_SI 1686 +oce_spider_sk MACH_OCE_SPIDER_SK OCE_SPIDER_SK 1687 +rovern6 MACH_ROVERN6 ROVERN6 1688 +pelco_evolution MACH_PELCO_EVOLUTION PELCO_EVOLUTION 1689 +wbd111 MACH_WBD111 WBD111 1690 +elaracpe MACH_ELARACPE ELARACPE 1691 +mabv3 MACH_MABV3 MABV3 1692 +mv2120 MACH_MV2120 MV2120 1693 +csb737 MACH_CSB737 CSB737 1695 +mx51_3ds MACH_MX51_3DS MX51_3DS 1696 +g900 MACH_G900 G900 1697 +apf27 MACH_APF27 APF27 1698 +ggus2000 MACH_GGUS2000 GGUS2000 1699 +omap_2430_mimic MACH_OMAP_2430_MIMIC OMAP_2430_MIMIC 1700 +imx27lite MACH_IMX27LITE IMX27LITE 1701 +almex MACH_ALMEX ALMEX 1702 +control MACH_CONTROL CONTROL 1703 +mba2410 MACH_MBA2410 MBA2410 1704 +volcano MACH_VOLCANO VOLCANO 1705 +zenith MACH_ZENITH ZENITH 1706 +muchip MACH_MUCHIP MUCHIP 1707 +magellan MACH_MAGELLAN MAGELLAN 1708 +usb_a9260 MACH_USB_A9260 USB_A9260 1709 +usb_a9263 MACH_USB_A9263 USB_A9263 1710 +qil_a9260 MACH_QIL_A9260 QIL_A9260 1711 +cme9210 MACH_CME9210 CME9210 1712 +hczh4 MACH_HCZH4 HCZH4 1713 +spearbasic MACH_SPEARBASIC SPEARBASIC 1714 +dep2440 MACH_DEP2440 DEP2440 1715 +hdl_gxr MACH_HDL_GXR HDL_GXR 1716 +hdl_gt MACH_HDL_GT HDL_GT 1717 +hdl_4g MACH_HDL_4G HDL_4G 1718 +s3c6000 MACH_S3C6000 S3C6000 1719 +mmsp2_mdk MACH_MMSP2_MDK MMSP2_MDK 1720 +mpx220 MACH_MPX220 MPX220 1721 +kzm_arm11_01 MACH_KZM_ARM11_01 KZM_ARM11_01 1722 +htc_polaris MACH_HTC_POLARIS HTC_POLARIS 1723 +htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724 +lg_ks20 MACH_LG_KS20 LG_KS20 1725 +hhgps MACH_HHGPS HHGPS 1726 +nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727 |
