diff options
Diffstat (limited to 'arch/arm')
203 files changed, 2333 insertions, 1523 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 03551fafb1fd..8615dfa604c4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -30,9 +30,9 @@ config ARM select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT + select HAVE_CC_STACKPROTECTOR select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT - select HAVE_CC_STACKPROTECTOR select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS @@ -308,6 +308,7 @@ config ARCH_MULTIPLATFORM select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER @@ -419,8 +420,8 @@ config ARCH_EFM32 bool "Energy Micro efm32" depends on !MMU select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR select ARM_NVIC + select AUTO_ZRELADDR select CLKSRC_OF select COMMON_CLK select CPU_V7M @@ -508,8 +509,8 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI @@ -1102,9 +1103,9 @@ source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig config IWMMXT - bool "Enable iWMMXt support" if !CPU_PJ4 - depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1221,19 +1222,6 @@ config ARM_ERRATA_742231 register of the Cortex-A9 which reduces the linefill issuing capabilities of the processor. -config PL310_ERRATA_588369 - bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 - help - The PL310 L2 cache controller implements three types of Clean & - Invalidate maintenance operations: by Physical Address - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). - They are architecturally defined to behave as the execution of a - clean operation followed immediately by an invalidate operation, - both performing to the same memory location. This functionality - is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. - config ARM_ERRATA_643719 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" depends on CPU_V7 && SMP @@ -1256,17 +1244,6 @@ config ARM_ERRATA_720789 tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. -config PL310_ERRATA_727915 - bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 - help - PL310 implements the Clean & Invalidate by Way L2 cache maintenance - operation (offset 0x7FC). This operation runs in background so that - PL310 can handle normal accesses while it is in progress. Under very - rare circumstances, due to this erratum, write data can be lost when - PL310 treats a cacheable write transaction during a Clean & - Invalidate by Way operation. - config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 @@ -1292,21 +1269,6 @@ config ARM_ERRATA_751472 operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. -config PL310_ERRATA_753970 - bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 - help - This option enables the workaround for the 753970 PL310 (r3p0) erratum. - - Under some condition the effect of cache sync operation on - the store buffer still remains when the operation completes. - This means that the store buffer is always asked to drain and - this prevents it from merging any further writes. The workaround - is to replace the normal offset of cache sync operation (0x730) - by another offset targeting an unmapped PL310 register 0x740. - This has the same effect as the cache sync operation: store buffer - drain and waiting for all buffers empty. - config ARM_ERRATA_754322 bool "ARM errata: possible faulty MMU translations following an ASID switch" depends on CPU_V7 @@ -1355,18 +1317,6 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. -config PL310_ERRATA_769419 - bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 - help - On revisions of the PL310 prior to r3p2, the Store Buffer does - not automatically drain. This can cause normal, non-cacheable - writes to be retained when the memory system is idle, leading - to suboptimal I/O performance for drivers using coherent DMA. - This option adds a write barrier to the cpu_idle loop so that, - on systems with an outer cache, the store buffer is drained - explicitly. - config ARM_ERRATA_775420 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" depends on CPU_V7 @@ -1567,8 +1517,8 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU - select CPU_PM select ARM_CPU_SUSPEND + select CPU_PM help The big.LITTLE "switcher" provides the core functionality to transparently handle transition between a cluster of A15's @@ -1912,9 +1862,9 @@ config XEN depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 depends on MMU + select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI select SWIOTLB_XEN - select ARCH_DMA_ADDR_T_64BIT help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4a2fc0bf6fc9..eab8ecbe69c1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1030,9 +1030,9 @@ config DEBUG_UART_PHYS default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI default 0x7c0003f8 if FOOTBRIDGE - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART + default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX @@ -1096,22 +1096,22 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE - default 0xfed60000 if DEBUG_RK29_UART0 - default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 - default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0xfed12000 if ARCH_KIRKWOOD + default 0xfed60000 if DEBUG_RK29_UART0 + default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f31e46..377b7c364033 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -51,10 +51,9 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb @@ -246,6 +245,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-ldp.dtb \ @@ -294,13 +294,6 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-apq8074-dragonboard.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60-stuib.dtb \ - ste-hrefprev60-tvk.dtb \ - ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb \ - ste-ccu8540.dtb \ - ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb @@ -369,9 +362,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e3f27ec31718..2e7d932887b5 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -183,7 +183,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -204,7 +204,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 28ae040e7c3d..6028217ace0f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -301,8 +301,8 @@ am335x_evm_audio_pins: am335x_evm_audio_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; @@ -331,7 +331,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -352,7 +352,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ec08f6f677c3..ab238850a7b2 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -364,7 +364,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -385,7 +385,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 7063311a58d9..9f22c189f636 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -118,7 +118,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -202,7 +201,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -223,7 +222,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9770e35f2536..7ad75b4e0663 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,8 +94,8 @@ /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ @@ -144,7 +144,7 @@ compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; reg = <0x49000000 0x10000>, - <0x44e10f90 0x10>; + <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; dma-channels = <64>; @@ -802,7 +802,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -816,7 +816,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 788391f91684..5a452fdd7c5d 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -62,5 +62,21 @@ }; }; +&iva { + status = "disabled"; +}; + +&mailbox { + status = "disabled"; +}; + +&mmu_isp { + status = "disabled"; +}; + +&smartreflex_mpu_iva { + status = "disabled"; +}; + /include/ "am35xx-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 36d523a26831..d1f8707ff1df 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -691,7 +691,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -705,7 +705,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index df8798e8bd25..a055f7f0f14a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -117,6 +117,11 @@ status = "okay"; }; +&gpio5 { + status = "okay"; + ti,no-reset-on-init; +}; + &mmc1 { status = "okay"; vmmc-supply = <&vmmcsd_fixed>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 82f238a9063f..3383c4b66803 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -67,6 +67,7 @@ i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + clock-frequency = <100000>; status = "okay"; audio_codec: audio-codec@4a { compatible = "cirrus,cs42l51"; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bbb40f62037d..bb77970c0b12 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -230,6 +230,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; eth1: ethernet@74000 { diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 9378d3136b41..0451124e8ebf 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -79,6 +79,11 @@ }; }; + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + nand: nand@d0000 { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a064f59da02d..ca8813bb99ba 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -336,6 +336,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; coredivclk: clock@e4250 { diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 448373c4b0e5..90f0bf6f9271 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -49,7 +49,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 61bda687f782..0c756421ae6a 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -59,7 +59,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; @@ -146,22 +146,22 @@ ethernet@70000 { status = "okay"; phy = <&phy0>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@74000 { status = "okay"; phy = <&phy1>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@30000 { status = "okay"; phy = <&phy2>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; ethernet@34000 { status = "okay"; phy = <&phy3>; - phy-mode = "rgmii-id"; + phy-mode = "qsgmii"; }; /* Front-side USB slot */ diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 985948ce67b3..5d42feb31049 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -39,7 +39,7 @@ /* Device Bus parameters are required */ /* Read parameters */ - devbus,bus-width = <8>; + devbus,bus-width = <16>; devbus,turn-off-ps = <60000>; devbus,badr-skew-ps = <0>; devbus,acc-first-ps = <124000>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ce1375595e5f..4537259ce529 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -34,7 +34,7 @@ }; spi0: spi@f0004000 { - cs-gpios = <&pioD 13 0>; + cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -79,7 +79,7 @@ }; spi1: spi@f8008000 { - cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e21dda0e8986..3be973e9889a 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -10,7 +10,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9261 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 63e1784d272c..92a52faebef7 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -8,7 +8,7 @@ #include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1893ae..149b55099935 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,7 +80,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,7 +94,7 @@ /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index e96da9a898ad..cfb8fc753f50 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1640,7 +1640,7 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; + ti,bit-shift = <24>; reg = <0x1860>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 32f760e24898..ea323f09dc78 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -56,6 +56,7 @@ osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 09f57b39e3ef..73aae4f5e539 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -29,6 +29,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6279e0b4f768..137e010eab35 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -48,6 +48,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0c75fe3deb35..9c89d1ca97c2 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -53,21 +53,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5f8216d08f6b..150bb4e2f744 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -50,21 +50,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index f6d3ac3e5587..d5d146a8b149 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -17,7 +17,8 @@ compatible = "denx,imx53-m53evk", "fsl,imx53"; memory { - reg = <0x70000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; soc { @@ -193,17 +194,17 @@ irq-trigger = <0x1>; stmpe_touchscreen { - compatible = "stmpe,ts"; + compatible = "st,stmpe-ts"; reg = <0>; - ts,sample-time = <4>; - ts,mod-12b = <1>; - ts,ref-sel = <0>; - ts,adc-freq = <1>; - ts,ave-ctrl = <3>; - ts,touch-det-delay = <3>; - ts,settling = <4>; - ts,fraction-z = <7>; - ts,i-drive = <1>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; }; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 7c8c12969892..a3431d784870 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -244,7 +244,7 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync_1>; - i2c-ddc-bus = <&i2c3>; + ddc-i2c-bus = <&i2c3>; fsl,tve-mode = "vga"; fsl,hsync-pin = <4>; fsl,vsync-pin = <6>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 3f825a6813da..ede04fa4161f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -14,7 +14,8 @@ / { memory { - reg = <0x70000000 0x40000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; display0: display@di0 { diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0217dde3b36b..3b73e81dc3f0 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -25,12 +25,17 @@ soc { display: display@di0 { compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb24_vga1>; status = "okay"; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + display-timings { VGA { clock-frequency = <25200000>; @@ -293,6 +298,10 @@ }; }; +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b57ab57740f6..6a1bf4ff83d5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -70,21 +70,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -111,7 +115,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x080000000>; + reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, <&clks IMX5_CLK_IPU_DI0_GATE>, @@ -430,7 +434,7 @@ port { lvds1_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; + remote-endpoint = <&ipu_di1_lvds1>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index a63bbb3d46bb..e4ae38fd0269 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -19,7 +19,10 @@ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; aliases { - gpio7 = &stmpe_gpio; + gpio7 = &stmpe_gpio1; + gpio8 = &stmpe_gpio2; + stmpe-i2c0 = &stmpe1; + stmpe-i2c1 = &stmpe2; }; memory { @@ -40,13 +43,15 @@ regulator-always-on; }; - reg_usb_otg_vbus: regulator@1 { + reg_usb_otg_switch: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "usb_otg_vbus"; + regulator-name = "usb_otg_switch"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 0>; + regulator-boot-on; + regulator-always-on; }; reg_usb_host1: regulator@2 { @@ -65,23 +70,23 @@ led-blue { label = "blue"; - gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-green { label = "green"; - gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; }; led-pink { label = "pink"; - gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; }; led-red { label = "red"; - gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; }; }; }; @@ -99,7 +104,8 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe>; + &pinctrl_stmpe1 + &pinctrl_stmpe2>; status = "okay"; pmic: pfuze100@08 { @@ -205,13 +211,25 @@ }; }; - stmpe: stmpe1601@40 { + stmpe1: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; - stmpe_gpio: stmpe_gpio { + stmpe_gpio1: stmpe_gpio { + #gpio-cells = <2>; + compatible = "st,stmpe-gpio"; + }; + }; + + stmpe2: stmpe1601@44 { + compatible = "st,stmpe1601"; + reg = <0x44>; + interrupts = <2 0>; + interrupt-parent = <&gpio5>; + + stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; }; @@ -273,10 +291,14 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -293,7 +315,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; @@ -344,11 +366,11 @@ &usbh1 { vbus-supply = <®_usb_host1>; disable-over-current; + dr_mode = "host"; status = "okay"; }; &usbotg { - vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 902f98310481..e51bb3f0fd56 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -487,9 +487,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8e99c9a9bc76..035d3a85c318 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -436,9 +436,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a3cb2fff8f61..d16066608e21 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -26,25 +26,25 @@ /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 /* * As the RMII pins are also connected to RGMII diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 55cb926fa3f7..eca0971d4db1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + #include "skeleton.dtsi" / { @@ -46,8 +48,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -59,16 +59,19 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -138,6 +141,12 @@ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 864d8dfb51ca..a8d9a93fab85 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -282,6 +282,7 @@ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3cb4941afeef..d26b099260a3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -68,8 +68,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -81,11 +79,13 @@ ckil { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; osc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 40791053106b..6becedebaa4e 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -75,7 +75,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p16"; + compatible = "st,m25p16"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 0e06fd3cee4d..3b62aeeaa3a2 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -46,7 +46,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef3463e0ae19..28b3ee369778 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -43,7 +43,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l1606e"; + compatible = "mxicy,mx25l1606e"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index c9e82eff9bf2..6761ffa2c4ab 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -48,7 +48,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 2cb0dc529165..b939f4f52d16 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -30,6 +30,16 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl@10000 { pmx_usb_led: pmx-usb-led { @@ -56,7 +66,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l12805d"; + compatible = "mxicy,mx25l12805d"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; @@ -73,14 +83,6 @@ ehci@50000 { status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 743152f31a81..e6e5ec4fe6b9 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -32,7 +32,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; @@ -50,7 +50,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index aa78c2d11fe7..e2cc85cc3b87 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -4,6 +4,16 @@ / { model = "ZyXEL NSA310"; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -26,14 +36,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 03fa24cf3344..0a07af9d8e58 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -104,7 +104,7 @@ status = "okay"; adt7476: adt7476a@2e { - compatible = "adt7476"; + compatible = "adi,adt7476"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index a5e779452867..27ca6a79c48a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -94,7 +94,7 @@ status = "okay"; lm85: lm85@2e { - compatible = "lm85"; + compatible = "national,lm85"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index b88da9392c32..0650beafc1de 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -40,7 +40,7 @@ pinctrl-names = "default"; s35390a: s35390a@30 { - compatible = "s35390a"; + compatible = "sii,s35390a"; reg = <0x30>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index b2f7cae06839..38520a287514 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -52,7 +52,7 @@ pinctrl-names = "default"; s24c02: s24c02@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 7d1c7677a18f..0bd70d928c69 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -127,11 +127,6 @@ i2c@11000 { status = "okay"; - - alc5621: alc5621@1a { - compatible = "realtek,alc5621"; - reg = <0x1a>; - }; }; serial@12000 { diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 0c9647d28765..fb354225740a 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -36,7 +36,7 @@ ranges = <0x40000000 0x40000000 0xa0000000>; l2-cache-controller@c0030000 { - compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0xc0030000 0x1000>; interrupts = <0 59 0>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index f577b7df9a29..521c587acaee 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -24,11 +24,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -36,12 +35,10 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; vddvario-supply = <&vddvario>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 22f35ea142c1..8f8c07da4ac1 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -71,13 +71,6 @@ interrupts = <58>; }; - mailbox: mailbox@48094000 { - compatible = "ti,omap2-mailbox"; - ti,hwmods = "mailbox"; - reg = <0x48094000 0x200>; - interrupts = <26>; - }; - intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 85b1fb014c43..2d9979835f24 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -125,6 +125,14 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>, <34>; + interrupt-names = "dsp", "iva"; + ti,hwmods = "mailbox"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index d09697dab55e..42d2c61c9e2d 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -216,6 +216,13 @@ dma-names = "tx", "rx"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + ti,hwmods = "mailbox"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts new file mode 100644 index 000000000000..7ac3bcf59d59 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-beagle-xm.dts" + +/ { + /* HS USB Port 2 Power enable was inverted with the xM C */ + hsusb2_power: hsusb2_power_reg { + enable-active-high; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d00055809e31..25ba08331d88 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -10,18 +10,6 @@ cpu0-supply = <&vcc>; }; }; - - vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a: regulator-vdd33a { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; }; &omap3_pmx_core { @@ -35,58 +23,34 @@ hsusb0_pins: pinmux_hsusb0_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ - OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ - OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ - OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ - OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ - OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ - OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ - OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ - OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ - OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ - OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ - OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ >; }; }; +#include "omap-gpmc-smsc911x.dtsi" + &gpmc { ranges = <5 0 0x2c000000 0x01000000>; - smsc1: ethernet@5,0 { + smsc1: ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; pinctrl-names = "default"; pinctrl-0 = <&smsc1_pins>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; reg = <5 0 0xff>; - bank-width = <2>; - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario>; - vdd33a-supply = <&vdd33a>; - reg-io-width = <4>; - smsc,save-mac-address; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index bf5a515a3247..da402f0fdab4 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -112,7 +112,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; - gpmc,device-nand; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b97736d98a64..e2d163bf0619 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -107,7 +107,7 @@ >; }; - smsc911x_pins: pinmux_smsc911x_pins { + smsc9221_pins: pinmux_smsc9221_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 7abd64f6ae21..b22caaaf774b 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ */ #include "omap3-igep.dtsi" -#include "omap-gpmc-smsc911x.dtsi" +#include "omap-gpmc-smsc9221.dtsi" / { model = "IGEPv2 (TI OMAP AM/DM37x)"; @@ -248,7 +248,7 @@ ethernet@gpmc { pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; + pinctrl-0 = <&smsc9221_pins>; reg = <5 0 0xff>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 6369d9f43ca2..cc1dce6978f5 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -368,7 +368,6 @@ /* no elm on omap3 */ gpmc,mux-add-data = <0>; - gpmc,device-nand; gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 7909c51b05a5..d59e3de1441e 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -2,20 +2,6 @@ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 */ -/ { - vddvario_sb_t35: regulator-vddvario-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a_sb_t35: regulator-vdd33a-sb-t35 { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; -}; - &omap3_pmx_core { smsc2_pins: pinmux_smsc2_pins { pinctrl-single,pins = < @@ -37,11 +23,10 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; + gpmc,cs-on-ns = <1>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-rd-off-ns = <18>; gpmc,adv-wr-off-ns = <48>; gpmc,oe-on-ns = <54>; gpmc,oe-off-ns = <168>; @@ -49,16 +34,14 @@ gpmc,we-off-ns = <168>; gpmc,rd-cycle-ns = <186>; gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vddvario-supply = <&vddvario_sb_t35>; - vdd33a-supply = <&vdd33a_sb_t35>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 024c9c6c682d..42189b65d393 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -8,6 +8,19 @@ / { model = "CompuLab SBC-T3517 with CM-T3517"; compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; + + /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ + vddvario: regulator-vddvario-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a-sb-t35 { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5e5790f631eb..4231191ade06 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -61,7 +61,7 @@ ti,hwmods = "mpu"; }; - iva { + iva: iva { compatible = "ti,iva2.2"; ti,hwmods = "iva"; @@ -74,7 +74,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 27fcac874742..649b5cd38b40 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -96,7 +96,7 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 6f3de22fb266..36b4312a5e0d 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -93,7 +93,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -107,7 +107,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -630,6 +630,13 @@ status = "disabled"; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; @@ -813,6 +820,12 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 1e82571d6823..0d6588d549bf 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -48,7 +48,7 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + compatible = "arm,pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; arm,tag-latency = <1 1 1>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8280884bfa59..2551e9438d35 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -28,7 +28,6 @@ gic: interrupt-controller@c2800000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xc2800000 0x1000>, <0xc2000000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6e99eb2df076..d01048ab3e77 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -141,12 +141,12 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index bdd73e6657b2..de1b6977c69a 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -230,17 +230,17 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,gpios = "sdhi1_data4", "sdhi1_ctrl"; + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index bb36596ea205..ed9a70af3e3f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -149,7 +149,7 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; }; @@ -164,7 +164,7 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; }; @@ -179,7 +179,7 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ @@ -187,7 +187,7 @@ uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eabcfdbb403a..a106b0872910 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel SAMA5D3 family SoC"; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index b029fe7ef17a..1b02208ea6ff 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { ahb { diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 382b04431f66..02848453ca0c 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a9fa75e41652..7a8d4c6115f7 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b7bd3b9a6753..5ecf552e1c00 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -34,7 +34,6 @@ gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 3075d2d3a8be..0aa6fef5ce22 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com> + * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 7f3baf51a3a9..32dd55e5f4e6 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -18,6 +18,7 @@ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; memory@0 { + device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index f09fb10a3791..81df870e5ee6 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -49,7 +49,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; PIO0: gpio@fe610000 { @@ -187,7 +187,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; PIO5: gpio@fee00000 { @@ -282,7 +282,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; PIO13: gpio@fe820000 { @@ -423,7 +423,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -460,7 +460,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index aeea304086eb..250d5ecc951e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; PIO0: gpio@fe610000 { @@ -201,7 +201,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; PIO5: gpio@fee00000 { @@ -333,7 +333,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; PIO13: gpio@fe820000 { @@ -461,7 +461,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -498,7 +498,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 32efc105df83..aba1c8a3f388 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -87,7 +87,7 @@ pll4: clk@01c20018 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; + compatible = "allwinner,sun7i-a20-pll4-clk"; reg = <0x01c20018 0x4>; clocks = <&osc24M>; clock-output-names = "pll4"; @@ -109,6 +109,14 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll8: clk@01c20040 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20040 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8"; + }; + cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; @@ -805,9 +813,9 @@ status = "disabled"; }; - i2c4: i2c@01c2bc00 { + i2c4: i2c@01c2c000 { compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2bc00 0x400>; + reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf45a1a39483..6d540a025148 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -233,19 +233,6 @@ status = "disabled"; }; - serial@0,70006400 { - compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; - reg = <0x0 0x70006400 0x0 0x40>; - reg-shift = <2>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_UARTE>; - resets = <&tegra_car 66>; - reset-names = "serial"; - dmas = <&apbdma 20>, <&apbdma 20>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7dd1d6ede525..ded361075aab 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -25,11 +25,13 @@ clocks { audio_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <50000000>; }; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 804873367669..b8ce0aa7b157 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -45,11 +45,13 @@ sxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; fxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -72,8 +74,6 @@ intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x40003000 0x1000>, <0x40002100 0x100>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 511180769af5..c1176abc34d9 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -24,6 +24,7 @@ device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; + clock-latency = <1000>; operating-points = < /* kHz uV */ 666667 1000000 @@ -54,6 +55,28 @@ interrupt-parent = <&intc>; ranges; + i2c0: zynq-i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: zynq-i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c913f77a21eb..5e09cee33d42 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -34,6 +34,82 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 88f62c50382e..4cc9913078cd 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -35,6 +35,74 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 5774b6ea7ad5..490f3dced749 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -433,8 +433,12 @@ static void bL_switcher_restore_cpus(void) { int i; - for_each_cpu(i, &bL_switcher_removed_logical_cpus) - cpu_up(i); + for_each_cpu(i, &bL_switcher_removed_logical_cpus) { + struct device *cpu_dev = get_cpu_device(i); + int ret = device_online(cpu_dev); + if (ret) + dev_err(cpu_dev, "switcher: unable to restore CPU\n"); + } } static int bL_switcher_halve_cpus(void) @@ -521,7 +525,7 @@ static int bL_switcher_halve_cpus(void) continue; } - ret = cpu_down(i); + ret = device_offline(get_cpu_device(i)); if (ret) { bL_switcher_restore_cpus(); return ret; @@ -797,10 +801,8 @@ static int __init bL_switcher_init(void) { int ret; - if (MAX_NR_CLUSTERS != 2) { - pr_err("%s: only dual cluster systems are supported\n", __func__); - return -EINVAL; - } + if (!mcpm_is_available()) + return -ENODEV; cpu_notifier(bL_switcher_hotplug_callback, 0); diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 41bca32409fc..5339009b3c0c 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event); #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) -static int edma_of_read_u32_to_s16_array(const struct device_node *np, - const char *propname, s16 *out_values, - size_t sz) +static int edma_xbar_event_map(struct device *dev, struct device_node *node, + struct edma_soc_info *pdata, size_t sz) { - int ret; - - ret = of_property_read_u16_array(np, propname, out_values, sz); - if (ret) - return ret; - - /* Terminate it */ - *out_values++ = -1; - *out_values++ = -1; - - return 0; -} - -static int edma_xbar_event_map(struct device *dev, - struct device_node *node, - struct edma_soc_info *pdata, int len) -{ - int ret, i; + const char pname[] = "ti,edma-xbar-event-map"; struct resource res; void __iomem *xbar; - const s16 (*xbar_chans)[2]; + s16 (*xbar_chans)[2]; + size_t nelm = sz / sizeof(s16); u32 shift, offset, mux; + int ret, i; - xbar_chans = devm_kzalloc(dev, - len/sizeof(s16) + 2*sizeof(s16), - GFP_KERNEL); + xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL); if (!xbar_chans) return -ENOMEM; ret = of_address_to_resource(node, 1, &res); if (ret) - return -EIO; + return -ENOMEM; xbar = devm_ioremap(dev, res.start, resource_size(&res)); if (!xbar) return -ENOMEM; - ret = edma_of_read_u32_to_s16_array(node, - "ti,edma-xbar-event-map", - (s16 *)xbar_chans, - len/sizeof(u32)); + ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm); if (ret) return -EIO; - for (i = 0; xbar_chans[i][0] != -1; i++) { + /* Invalidate last entry for the other user of this mess */ + nelm >>= 1; + xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1; + + for (i = 0; i < nelm; i++) { shift = (xbar_chans[i][1] & 0x03) << 3; offset = xbar_chans[i][1] & 0xfffffffc; mux = readl(xbar + offset); @@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct device *dev, writel(mux, (xbar + offset)); } - pdata->xbar_chans = xbar_chans; - + pdata->xbar_chans = (const s16 (*)[2]) xbar_chans; return 0; } diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 7522c87e82fc..f91136ab447e 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -48,6 +48,11 @@ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) return 0; } +bool mcpm_is_available(void) +{ + return (platform_ops) ? true : false; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { if (!platform_ops) diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 01004640ee4d..3df3f3a79ef4 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -132,7 +132,7 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_XZ_DEC=y CONFIG_AVERAGE=y -CONFIG_PINCTRL_CAPRI=y +CONFIG_PINCTRL_BCM281XX=y CONFIG_WATCHDOG=y CONFIG_BCM_KONA_WDT=y CONFIG_BCM_KONA_WDT_DEBUG=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a9667957b757..a4e8d017f25b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -226,7 +226,7 @@ CONFIG_USB_DWC3=m CONFIG_USB_TEST=y CONFIG_NOP_USB_XCEIV=y CONFIG_OMAP_USB2=y -CONFIG_OMAP_USB3=y +CONFIG_TI_PIPE3=y CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index b5df4a511b0a..81ba78eaf54a 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -37,7 +37,7 @@ CONFIG_SUN4I_EMAC=y # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set CONFIG_SERIAL_8250=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index fd81a1b99cce..aaa95ab606a8 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -11,6 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_U300=y @@ -21,7 +22,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y -CONFIG_FPE_NWFPE=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -64,8 +64,8 @@ CONFIG_TMPFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 65f77885c167..d219d6a43238 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,16 +1,16 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y -CONFIG_MACH_UX500_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y @@ -34,16 +34,22 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y CONFIG_PHONET=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_CFG80211_DEBUGFS=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y -# CONFIG_WLAN is not set +CONFIG_CW1200=y +CONFIG_CW1200_WLAN_SDIO=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -85,15 +91,12 @@ CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP5521=y -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -103,6 +106,11 @@ CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_HSEM_U8500=y +CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_ST_PRESS=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -110,8 +118,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 6493802f880a..c3f11524f10c 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -42,24 +42,23 @@ #ifndef __ASSEMBLY__ #if __LINUX_ARM_ARCH__ >= 4 -#define vectors_high() (cr_alignment & CR_V) +#define vectors_high() (get_cr() & CR_V) #else #define vectors_high() (0) #endif #ifdef CONFIG_CPU_CP15 -extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ -static inline unsigned int get_cr(void) +static inline unsigned long get_cr(void) { - unsigned int val; + unsigned long val; asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc"); return val; } -static inline void set_cr(unsigned int val) +static inline void set_cr(unsigned long val) { asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" : : "r" (val) : "cc"); @@ -80,10 +79,6 @@ static inline void set_auxcr(unsigned int val) isb(); } -#ifndef CONFIG_SMP -extern void adjust_cr(unsigned long mask, unsigned long set); -#endif - #define CPACC_FULL(n) (3 << (n * 2)) #define CPACC_SVC(n) (1 << (n * 2)) #define CPACC_DISABLE(n) (0 << (n * 2)) @@ -106,13 +101,17 @@ static inline void set_copro_access(unsigned int val) #else /* ifdef CONFIG_CPU_CP15 */ /* - * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the - * minds of the developers). Yielding 0 for machines without a cp15 (and making - * it read-only) is fine for most cases and saves quite some #ifdeffery. + * cr_alignment is tightly coupled to cp15 (at least in the minds of the + * developers). Yielding 0 for machines without a cp15 (and making it + * read-only) is fine for most cases and saves quite some #ifdeffery. */ -#define cr_no_alignment UL(0) #define cr_alignment UL(0) +static inline unsigned long get_cr(void) +{ + return 0; +} + #endif /* ifdef CONFIG_CPU_CP15 / else */ #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 550bf7110fef..8c2b7321a478 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -223,22 +223,22 @@ static inline int cpu_is_xsc3(void) #endif /* - * Marvell's PJ4 core is based on V7 version. It has some modification - * for coprocessor setting. For this reason, we need a way to distinguish - * it. + * Marvell's PJ4 and PJ4B cores are based on V7 version, + * but require a specical sequence for enabling coprocessors. + * For this reason, we need a way to distinguish them. */ -#ifndef CONFIG_CPU_PJ4 -#define cpu_is_pj4() 0 -#else +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) static inline int cpu_is_pj4(void) { unsigned int id; id = read_cpuid_id(); - if ((id & 0xfffffff0) == 0x562f5840) + if ((id & 0xff0fff00) == 0x560f5800) return 1; return 0; } +#else +#define cpu_is_pj4() 0 #endif #endif diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 191ada6e4d2d..662c7bd06108 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -156,7 +156,7 @@ /* Select the best insn combination to perform the */ \ /* actual __m * __n / (__p << 64) operation. */ \ if (!__c) { \ - asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ "mov %Q0, #0" \ : "=&r" (__res) \ : "r" (__m), "r" (__n) \ diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 6795ff743b3d..3a5ec1c25659 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -26,8 +26,8 @@ #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 -#define L2X0_TAG_LATENCY_CTRL 0x108 -#define L2X0_DATA_LATENCY_CTRL 0x10C +#define L310_TAG_LATENCY_CTRL 0x108 +#define L310_DATA_LATENCY_CTRL 0x10C #define L2X0_EVENT_CNT_CTRL 0x200 #define L2X0_EVENT_CNT1_CFG 0x204 #define L2X0_EVENT_CNT0_CFG 0x208 @@ -54,53 +54,93 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 -#define L2X0_ADDR_FILTER_START 0xC00 -#define L2X0_ADDR_FILTER_END 0xC04 +#define L310_ADDR_FILTER_START 0xC00 +#define L310_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 #define L2X0_DEBUG_CTRL 0xF40 -#define L2X0_PREFETCH_CTRL 0xF60 -#define L2X0_POWER_CTRL 0xF80 -#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) -#define L2X0_STNDBY_MODE_EN (1 << 0) +#define L310_PREFETCH_CTRL 0xF60 +#define L310_POWER_CTRL 0xF80 +#define L310_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L310_STNDBY_MODE_EN (1 << 0) /* Registers shifts and masks */ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L220 (2 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_ID_RTL_MASK 0x3f -#define L2X0_CACHE_ID_RTL_R0P0 0x0 -#define L2X0_CACHE_ID_RTL_R1P0 0x2 -#define L2X0_CACHE_ID_RTL_R2P0 0x4 -#define L2X0_CACHE_ID_RTL_R3P0 0x5 -#define L2X0_CACHE_ID_RTL_R3P1 0x6 -#define L2X0_CACHE_ID_RTL_R3P2 0x8 +#define L210_CACHE_ID_RTL_R0P2_02 0x00 +#define L210_CACHE_ID_RTL_R0P1 0x01 +#define L210_CACHE_ID_RTL_R0P2_01 0x02 +#define L210_CACHE_ID_RTL_R0P3 0x03 +#define L210_CACHE_ID_RTL_R0P4 0x0b +#define L210_CACHE_ID_RTL_R0P5 0x0f +#define L220_CACHE_ID_RTL_R1P7_01REL0 0x06 +#define L310_CACHE_ID_RTL_R0P0 0x00 +#define L310_CACHE_ID_RTL_R1P0 0x02 +#define L310_CACHE_ID_RTL_R2P0 0x04 +#define L310_CACHE_ID_RTL_R3P0 0x05 +#define L310_CACHE_ID_RTL_R3P1 0x06 +#define L310_CACHE_ID_RTL_R3P1_50REL0 0x07 +#define L310_CACHE_ID_RTL_R3P2 0x08 +#define L310_CACHE_ID_RTL_R3P3 0x09 -#define L2X0_AUX_CTRL_MASK 0xc0000fff +/* L2C auxiliary control register - bits common to L2C-210/220/310 */ +#define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 +#define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) +#define L2C_AUX_CTRL_WAY_SIZE(n) ((n) << 17) +#define L2C_AUX_CTRL_EVTMON_ENABLE BIT(20) +#define L2C_AUX_CTRL_PARITY_ENABLE BIT(21) +#define L2C_AUX_CTRL_SHARED_OVERRIDE BIT(22) +/* L2C-210/220 common bits */ #define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 -#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK (7 << 0) #define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 -#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (7 << 3) #define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 -#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (7 << 6) #define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 -#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) -#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 -#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) -#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 -#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 -#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 -#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28 -#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 -#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (7 << 9) +#define L2X0_AUX_CTRL_ASSOC_SHIFT 13 +#define L2X0_AUX_CTRL_ASSOC_MASK (15 << 13) +/* L2C-210 specific bits */ +#define L210_AUX_CTRL_WRAP_DISABLE BIT(12) +#define L210_AUX_CTRL_WA_OVERRIDE BIT(23) +#define L210_AUX_CTRL_EXCLUSIVE_ABORT BIT(24) +/* L2C-220 specific bits */ +#define L220_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L220_AUX_CTRL_FWA_SHIFT 23 +#define L220_AUX_CTRL_FWA_MASK (3 << 23) +#define L220_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L220_AUX_CTRL_NS_INT_CTRL BIT(27) +/* L2C-310 specific bits */ +#define L310_AUX_CTRL_FULL_LINE_ZERO BIT(0) /* R2P0+ */ +#define L310_AUX_CTRL_HIGHPRIO_SO_DEV BIT(10) /* R2P0+ */ +#define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ +#define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) +#define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ +#define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) +#define L310_AUX_CTRL_NS_INT_CTRL BIT(27) +#define L310_AUX_CTRL_DATA_PREFETCH BIT(28) +#define L310_AUX_CTRL_INSTR_PREFETCH BIT(29) +#define L310_AUX_CTRL_EARLY_BRESP BIT(30) /* R2P0+ */ -#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 -#define L2X0_LATENCY_CTRL_RD_SHIFT 4 -#define L2X0_LATENCY_CTRL_WR_SHIFT 8 +#define L310_LATENCY_CTRL_SETUP(n) ((n) << 0) +#define L310_LATENCY_CTRL_RD(n) ((n) << 4) +#define L310_LATENCY_CTRL_WR(n) ((n) << 8) -#define L2X0_ADDR_FILTER_EN 1 +#define L310_ADDR_FILTER_EN 1 + +#define L310_PREFETCH_CTRL_OFFSET_MASK 0x1f +#define L310_PREFETCH_CTRL_DBL_LINEFILL_INCR BIT(23) +#define L310_PREFETCH_CTRL_PREFETCH_DROP BIT(24) +#define L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP BIT(27) +#define L310_PREFETCH_CTRL_DATA_PREFETCH BIT(28) +#define L310_PREFETCH_CTRL_INSTR_PREFETCH BIT(29) +#define L310_PREFETCH_CTRL_DBL_LINEFILL BIT(30) #define L2X0_CTRL_EN 1 diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index c43473afde8a..060a75e99263 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -44,6 +44,9 @@ struct machine_desc { unsigned char reserve_lp1 :1; /* never has lp1 */ unsigned char reserve_lp2 :1; /* never has lp2 */ enum reboot_mode reboot_mode; /* default restart mode */ + unsigned l2c_aux_val; /* L2 cache aux value */ + unsigned l2c_aux_mask; /* L2 cache aux mask */ + void (*l2c_write_sec)(unsigned long, unsigned); struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); void (*fixup)(struct tag *, char **); diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 90ed21942456..d9702eb0b02b 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -54,6 +54,13 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster, */ /** + * mcpm_is_available - returns whether MCPM is initialized and available + * + * This returns true or false accordingly. + */ +bool mcpm_is_available(void); + +/** * mcpm_cpu_power_up - make given CPU in given cluster runable * * @cpu: CPU number within given cluster diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index f94784f0e3a6..891a56b35bcf 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -28,53 +28,84 @@ struct outer_cache_fns { void (*clean_range)(unsigned long, unsigned long); void (*flush_range)(unsigned long, unsigned long); void (*flush_all)(void); - void (*inv_all)(void); void (*disable)(void); #ifdef CONFIG_OUTER_CACHE_SYNC void (*sync)(void); #endif - void (*set_debug)(unsigned long); void (*resume)(void); + + /* This is an ARM L2C thing */ + void (*write_sec)(unsigned long, unsigned); }; extern struct outer_cache_fns outer_cache; #ifdef CONFIG_OUTER_CACHE - +/** + * outer_inv_range - invalidate range of outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } + +/** + * outer_clean_range - clean dirty outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } + +/** + * outer_flush_range - clean and invalidate outer cache lines + * @start: starting physical address, inclusive + * @end: end physical address, exclusive + */ static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); } +/** + * outer_flush_all - clean and invalidate all cache lines in the outer cache + * + * Note: depending on implementation, this may not be atomic - it must + * only be called with interrupts disabled and no other active outer + * cache masters. + * + * It is intended that this function is only used by implementations + * needing to override the outer_cache.disable() method due to security. + * (Some implementations perform this as a clean followed by an invalidate.) + */ static inline void outer_flush_all(void) { if (outer_cache.flush_all) outer_cache.flush_all(); } -static inline void outer_inv_all(void) -{ - if (outer_cache.inv_all) - outer_cache.inv_all(); -} - -static inline void outer_disable(void) -{ - if (outer_cache.disable) - outer_cache.disable(); -} +/** + * outer_disable - clean, invalidate and disable the outer cache + * + * Disable the outer cache, ensuring that any data contained in the outer + * cache is pushed out to lower levels of system memory. The note and + * conditions above concerning outer_flush_all() applies here. + */ +extern void outer_disable(void); +/** + * outer_resume - restore the cache configuration and re-enable outer cache + * + * Restore any configuration that the cache had when previously enabled, + * and re-enable the outer cache. + */ static inline void outer_resume(void) { if (outer_cache.resume) @@ -90,13 +121,18 @@ static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } -static inline void outer_inv_all(void) { } static inline void outer_disable(void) { } static inline void outer_resume(void) { } #endif #ifdef CONFIG_OUTER_CACHE_SYNC +/** + * outer_sync - perform a sync point for outer cache + * + * Ensure that all outer cache operations are complete and any store + * buffers are drained. + */ static inline void outer_sync(void) { if (outer_cache.sync) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 0baf7f0d9394..f1a0dace3efe 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -98,15 +98,25 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) } } -static inline void tlb_flush_mmu(struct mmu_gather *tlb) +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) { tlb_flush(tlb); +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ free_pages_and_swap_cache(tlb->pages, tlb->nr); tlb->nr = 0; if (tlb->pages == tlb->local) __tlb_alloc_page(tlb); } +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush_mmu_tlbonly(tlb); + tlb_flush_mmu_free(tlb); +} + static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 12c3a5decc60..75d95799b6e6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long); #define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ + const typeof(*(p)) __user *__tmp_p = (p); \ register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index cf4f3e867395..ded062f9b358 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -77,7 +77,6 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine) } /* VIRT <-> MACHINE conversion */ #define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) -#define virt_to_pfn(v) (PFN_DOWN(__pa(v))) #define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v))) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index fb5584d0cc05..ba94446c72d9 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -408,6 +408,7 @@ #define __NR_finit_module (__NR_SYSCALL_BASE+379) #define __NR_sched_setattr (__NR_SYSCALL_BASE+380) #define __NR_sched_getattr (__NR_SYSCALL_BASE+381) +#define __NR_renameat2 (__NR_SYSCALL_BASE+382) /* * This may need to be greater than __NR_last_syscall+1 in order to diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 10f0464206a2..38ddd9f83d0e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o +obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 166e945de832..8f51bdcdacbb 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -391,6 +391,7 @@ CALL(sys_finit_module) /* 380 */ CALL(sys_sched_setattr) CALL(sys_sched_getattr) + CALL(sys_renameat2) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0ffdec8eceb7..52a949a8077d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -344,7 +344,7 @@ ENDPROC(__pabt_svc) @ @ Enable the alignment trap while in kernel mode @ - alignment_trap r0 + alignment_trap r0, .LCcralign @ @ Clear FP to mark the first stack frame @@ -1147,11 +1147,8 @@ __vectors_start: .data .globl cr_alignment - .globl cr_no_alignment cr_alignment: .space 4 -cr_no_alignment: - .space 4 #ifdef CONFIG_MULTI_IRQ_HANDLER .globl handle_arch_irq diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index a2dcafdf1bc8..7139d4a7dea7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -365,13 +365,7 @@ ENTRY(vector_swi) str r0, [sp, #S_OLD_R0] @ Save OLD_R0 #endif zero_fp - -#ifdef CONFIG_ALIGNMENT_TRAP - ldr ip, __cr_alignment - ldr ip, [ip] - mcr p15, 0, ip, c1, c0 @ update control register -#endif - + alignment_trap ip, __cr_alignment enable_irq ct_user_exit get_thread_info tsk diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 1420725142ca..5d702f8900b1 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -37,9 +37,9 @@ #endif .endm - .macro alignment_trap, rtemp + .macro alignment_trap, rtemp, label #ifdef CONFIG_ALIGNMENT_TRAP - ldr \rtemp, .LCcralign + ldr \rtemp, \label ldr \rtemp, [\rtemp] mcr p15, 0, \rtemp, c1, c0 #endif @@ -132,6 +132,10 @@ orrne r5, V7M_xPSR_FRAMEPTRALIGN biceq r5, V7M_xPSR_FRAMEPTRALIGN + @ ensure bit 0 is cleared in the PC, otherwise behaviour is + @ unpredictable + bic r4, #1 + @ write basic exception frame stmdb r2!, {r1, r3-r5} ldmia sp, {r1, r3-r5} diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c96ecacb2021..572a38335c96 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -99,8 +99,7 @@ __mmap_switched: str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer cmp r7, #0 - bicne r4, r0, #CR_A @ Clear 'A' bit - stmneia r7, {r0, r4} @ Save control register values + strne r0, [r7] @ Save control register values b start_kernel ENDPROC(__mmap_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 73dbee3097e4..2c35f0ff2fdc 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -587,7 +587,7 @@ __fixup_pv_table: add r6, r6, r3 @ adjust __pv_phys_pfn_offset address add r7, r7, r3 @ adjust __pv_offset address mov r0, r8, lsr #12 @ convert to PFN - str r0, [r6, #LOW_OFFSET] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset + str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9723d17b8f38..2c4257604513 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -37,6 +37,7 @@ #include <linux/proc_fs.h> #include <linux/export.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -115,10 +116,21 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { + int ret; + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) irqchip_init(); else machine_desc->init_irq(); + + if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) && + (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) { + outer_cache.write_sec = machine_desc->l2c_write_sec; + ret = l2x0_of_init(machine_desc->l2c_aux_val, + machine_desc->l2c_aux_mask); + if (ret) + pr_err("L2C: failed to init: %d\n", ret); + } } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 4bb029ea8917..a5599cfc43cb 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -20,12 +20,16 @@ #include <asm/asm-offsets.h> #include <asm/assembler.h> -#if defined(CONFIG_CPU_PJ4) +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code #define XSC(code...) -#else +#elif defined(CONFIG_CPU_MOHAWK) || \ + defined(CONFIG_CPU_XSC3) || \ + defined(CONFIG_CPU_XSCALE) #define PJ4(code...) #define XSC(code...) code +#else +#error "Unsupported iWMMXt architecture" #endif #define MMX_WR0 (0x00) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index f0d180d8b29f..8cf0996aa1a8 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image) soft_restart(reboot_entry_phys); } + +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_ARM_LPAE + VMCOREINFO_CONFIG(ARM_LPAE); +#endif +} diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index fc7208636284..8153e36b2491 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -45,7 +45,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) return NOTIFY_DONE; } -static struct notifier_block iwmmxt_notifier_block = { +static struct notifier_block __maybe_unused iwmmxt_notifier_block = { .notifier_call = iwmmxt_do, }; @@ -72,6 +72,33 @@ static void __init pj4_cp_access_write(u32 value) : "=r" (temp) : "r" (value)); } +static int __init pj4_get_iwmmxt_version(void) +{ + u32 cp_access, wcid; + + cp_access = pj4_cp_access_read(); + pj4_cp_access_write(cp_access | 0xf); + + /* check if coprocessor 0 and 1 are available */ + if ((pj4_cp_access_read() & 0xf) != 0xf) { + pj4_cp_access_write(cp_access); + return -ENODEV; + } + + /* read iWMMXt coprocessor id register p1, c0 */ + __asm__ __volatile__ ("mrc p1, 0, %0, c0, c0, 0\n" : "=r" (wcid)); + + pj4_cp_access_write(cp_access); + + /* iWMMXt v1 */ + if ((wcid & 0xffffff00) == 0x56051000) + return 1; + /* iWMMXt v2 */ + if ((wcid & 0xffffff00) == 0x56052000) + return 2; + + return -EINVAL; +} /* * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy @@ -79,17 +106,26 @@ static void __init pj4_cp_access_write(u32 value) */ static int __init pj4_cp0_init(void) { - u32 cp_access; + u32 __maybe_unused cp_access; + int vers; if (!cpu_is_pj4()) return 0; + vers = pj4_get_iwmmxt_version(); + if (vers < 0) + return 0; + +#ifndef CONFIG_IWMMXT + pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n"); +#else cp_access = pj4_cp_access_read() & ~0xf; pj4_cp_access_write(cp_access); - printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n"); + pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers); elf_hwcap |= HWCAP_IWMMXT; thread_register_notifier(&iwmmxt_notifier_block); +#endif return 0; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6d78ba47ea5b..8a16ee5d8a95 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -72,6 +72,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif +extern void init_default_cache_policy(unsigned long); extern void paging_init(const struct machine_desc *desc); extern void early_paging_init(const struct machine_desc *, struct proc_info_list *); @@ -590,7 +591,7 @@ static void __init setup_processor(void) pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); + proc_arch[cpu_architecture()], get_cr()); snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", list->arch_name, ENDIANNESS); @@ -603,7 +604,9 @@ static void __init setup_processor(void) #ifndef CONFIG_ARM_THUMB elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif - +#ifdef CONFIG_MMU + init_default_cache_policy(list->__cpu_mm_mmu_flags); +#endif erratum_a15_798181_init(); feat_v6_fixup(); diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 702bd329d9d0..e90a3148f385 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -203,9 +203,9 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, int ret; switch (cmd) { - case F_GETLKP: - case F_SETLKP: - case F_SETLKPW: + case F_OFD_GETLK: + case F_OFD_SETLK: + case F_OFD_SETLKW: case F_GETLK64: case F_SETLK64: case F_SETLKW64: diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3c217694ebec..cb791ac6a003 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -285,7 +285,7 @@ static int unwind_exec_pop_r4_to_rN(struct unwind_ctrl_block *ctrl, if (unwind_pop_register(ctrl, &vsp, reg)) return -URC_FAILURE; - if (insn & 0x80) + if (insn & 0x8) if (unwind_pop_register(ctrl, &vsp, 14)) return -URC_FAILURE; diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 466bd299b1a8..4be5bb150bdd 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -23,7 +23,7 @@ config KVM select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_ARM_HOST - depends on ARM_VIRT_EXT && ARM_LPAE + depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN ---help--- Support hosting virtualized guest machines. You will also need to select one or more of the processor modules below. diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 80bb1e6c2c29..16f804938b8f 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start; static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; +#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) + #define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x)) static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) @@ -293,14 +295,14 @@ void free_boot_hyp_pgd(void) if (boot_hyp_pgd) { unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(boot_hyp_pgd); + free_pages((unsigned long)boot_hyp_pgd, pgd_order); boot_hyp_pgd = NULL; } if (hyp_pgd) unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(init_bounce_page); + free_page((unsigned long)init_bounce_page); init_bounce_page = NULL; mutex_unlock(&kvm_hyp_pgd_mutex); @@ -330,7 +332,7 @@ void free_hyp_pgds(void) for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); - kfree(hyp_pgd); + free_pages((unsigned long)hyp_pgd, pgd_order); hyp_pgd = NULL; } @@ -1024,7 +1026,7 @@ int kvm_mmu_init(void) size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; phys_addr_t phys_base; - init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + init_bounce_page = (void *)__get_free_page(GFP_KERNEL); if (!init_bounce_page) { kvm_err("Couldn't allocate HYP init bounce page\n"); err = -ENOMEM; @@ -1050,8 +1052,9 @@ int kvm_mmu_init(void) (unsigned long)phys_base); } - hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); - boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); err = -ENOMEM; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 8b1b0a870025..a0282928e9c1 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1296,7 +1296,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9260-adc", .id = -1, .dev = { .platform_data = &adc_data, diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 77b04c2edd78..dab362c06487 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1204,7 +1204,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9g45-adc", .id = -1, .dev = { .platform_data = &adc_data, diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index edff69761e04..e9bcbdbce555 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -43,19 +43,14 @@ static void __init bcm5301x_init_early(void) "imprecise external abort"); } -static void __init bcm5301x_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char __initconst *bcm5301x_dt_compat[] = { "brcm,bcm4708", NULL, }; DT_MACHINE_START(BCM5301X, "BCM5301X") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_early = bcm5301x_init_early, - .init_machine = bcm5301x_dt_init, .dt_compat = bcm5301x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c index 025bcb5473eb..ac181c6797ee 100644 --- a/arch/arm/mach-berlin/berlin.c +++ b/arch/arm/mach-berlin/berlin.c @@ -18,16 +18,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -static void __init berlin_init_machine(void) -{ - /* - * with DT probing for L2CCs, berlin_init_machine can be removed. - * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc - */ - l2x0_of_init(0x70c00000, 0xfeffffff); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const berlin_dt_compat[] = { "marvell,berlin", NULL, @@ -35,5 +25,10 @@ static const char * const berlin_dt_compat[] = { DT_MACHINE_START(BERLIN_DT, "Marvell Berlin") .dt_compat = berlin_dt_compat, - .init_machine = berlin_init_machine, + /* + * with DT probing for L2CCs, berlin_init_machine can be removed. + * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc + */ + .l2c_aux_val = 0x30c00000, + .l2c_aux_mask = 0xfeffffff, MACHINE_END diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 2ae28a69e3e5..f85449a6accd 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -272,9 +272,9 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_TAG_LATENCY_CTRL); + val = readl(base + L310_TAG_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_TAG_LATENCY_CTRL); + writel(val, base + L310_TAG_LATENCY_CTRL); /* * Data RAM Control register @@ -285,12 +285,12 @@ void __init cns3xxx_l2x0_init(void) * * 1 cycle of latency for setup, read and write accesses */ - val = readl(base + L2X0_DATA_LATENCY_CTRL); + val = readl(base + L310_DATA_LATENCY_CTRL); val &= 0xfffff888; - writel(val, base + L2X0_DATA_LATENCY_CTRL); + writel(val, base + L310_DATA_LATENCY_CTRL); /* 32 KiB, 8-way, parity disable */ - l2x0_init(base, 0x00540000, 0xfe000fff); + l2x0_init(base, 0x00500000, 0xfe0f0fff); } #endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9ef3f83efaff..88c619d1e145 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -55,7 +55,6 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; -extern unsigned long l2x0_regs_phys; struct exynos_pmu_conf { void __iomem *reg; unsigned int val[NUM_SYS_POWERDOWN]; diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b32a907d021d..a763c0862da9 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -32,9 +32,6 @@ #include "mfc.h" #include "regs-pmu.h" -#define L2_AUX_VAL 0x7C470001 -#define L2_AUX_MASK 0xC200ffff - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -319,22 +316,6 @@ static int __init exynos_core_init(void) } core_initcall(exynos_core_init); -static int __init exynos4_l2x0_cache_init(void) -{ - int ret; - - ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); - if (ret) - return ret; - - if (IS_ENABLED(CONFIG_S5P_SLEEP)) { - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); - } - return 0; -} -early_initcall(exynos4_l2x0_cache_init); - static void __init exynos_dt_machine_init(void) { struct device_node *i2c_np; @@ -400,6 +381,8 @@ static void __init exynos_reserve(void) DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fffff, .smp = smp_ops(exynos_smp_ops), .map_io = exynos_init_io, .init_early = exynos_firmware_init, diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index a2613e944e10..108a45f4bb62 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,8 +16,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 @@ -53,33 +51,7 @@ ENTRY(exynos_cpu_resume) and r0, r0, r1 ldr r1, =CPU_CORTEX_A9 cmp r0, r1 - bne skip_l2_resume - adr r0, l2x0_regs_phys - ldr r0, [r0] - cmp r0, #0 - beq skip_l2_resume - ldr r1, [r0, #L2X0_R_PHY_BASE] - ldr r2, [r1, #L2X0_CTRL] - tst r2, #0x1 - bne skip_l2_resume - ldr r2, [r0, #L2X0_R_AUX_CTRL] - str r2, [r1, #L2X0_AUX_CTRL] - ldr r2, [r0, #L2X0_R_TAG_LATENCY] - str r2, [r1, #L2X0_TAG_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_DATA_LATENCY] - str r2, [r1, #L2X0_DATA_LATENCY_CTRL] - ldr r2, [r0, #L2X0_R_PREFETCH_CTRL] - str r2, [r1, #L2X0_PREFETCH_CTRL] - ldr r2, [r0, #L2X0_R_PWR_CTRL] - str r2, [r1, #L2X0_POWER_CTRL] - mov r2, #1 - str r2, [r1, #L2X0_CTRL] -skip_l2_resume: + bleq l2c310_early_resume #endif b cpu_resume ENDPROC(exynos_cpu_resume) -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_regs_phys -l2x0_regs_phys: - .long 0 -#endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index c7de89b263dd..8c35ae4ff176 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -51,11 +51,13 @@ static void __init highbank_scu_map_io(void) } -static void highbank_l2x0_disable(void) +static void highbank_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - highbank_smc1(0x102, 0x0); + if (reg == L2X0_CTRL) + highbank_smc1(0x102, val); + else + WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n", + reg); } static void __init highbank_init_irq(void) @@ -64,14 +66,6 @@ static void __init highbank_init_irq(void) if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) highbank_scu_map_io(); - - /* Enable PL310 L2 Cache controller */ - if (IS_ENABLED(CONFIG_CACHE_L2X0) && - of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) { - highbank_smc1(0x102, 0x1); - l2x0_of_init(0, ~0UL); - outer_cache.disable = highbank_l2x0_disable; - } } static void highbank_power_off(void) @@ -185,6 +179,9 @@ DT_MACHINE_START(HIGHBANK, "Highbank") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = (4ULL * SZ_1G), #endif + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .l2c_write_sec = highbank_l2c310_write_sec, .init_irq = highbank_init_irq, .init_machine = highbank_init, .dt_compat = highbank_match, diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index b0e7f9d2c245..2b4d6acfa34a 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -208,8 +208,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); - clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); @@ -258,14 +258,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels)); - clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels)); - clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels)); - clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); + clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); @@ -445,6 +445,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } + clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]); + clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]); + clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]); + clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]); + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 2d8aef5a6efa..c44602758120 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -20,19 +20,14 @@ static void __init vf610_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init vf610_init_irq(void) -{ - l2x0_of_init(0, ~0UL); - irqchip_init(); -} - static const char *vf610_dt_compat[] __initconst = { "fsl,vf610", NULL, }; DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") - .init_irq = vf610_init_irq, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 20048ff05739..fe123b079c05 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -334,28 +334,10 @@ ENDPROC(imx6_suspend) * turned into relative ones. */ -#ifdef CONFIG_CACHE_L2X0 - .macro pl310_resume - adr r0, l2x0_saved_regs_offset - ldr r2, [r0] - add r2, r2, r0 - ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 - ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value - str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl - mov r1, #0x1 - str r1, [r0, #L2X0_CTRL] @ re-enable L2 - .endm - -l2x0_saved_regs_offset: - .word l2x0_saved_regs - . - -#else - .macro pl310_resume - .endm -#endif - ENTRY(v7_cpu_resume) bl v7_invalidate_l1 - pl310_resume +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif b cpu_resume ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 5e3027d3692f..3b0733edb68c 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -124,7 +124,7 @@ void __init imx_init_l2cache(void) } /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); val |= 0x70800000; /* * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 @@ -137,14 +137,12 @@ void __init imx_init_l2cache(void) */ if (cpu_is_imx6q()) val &= ~(1 << 30 | 1 << 23); - writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); - val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; - writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); iounmap(l2x0_base); of_node_put(np); out: - l2x0_of_init(0, ~0UL); + l2x0_of_init(0, ~0); } #endif diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 333fca8fdc41..48169caa56ea 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -59,9 +59,6 @@ static void __init mvebu_timer_and_clk_init(void) clocksource_of_init(); coherency_init(); BUG_ON(mvebu_mbus_dt_init()); -#ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); -#endif if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -109,6 +106,8 @@ static const char * const armada_370_xp_dt_compat[] = { }; DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, .init_time = mvebu_timer_and_clk_init, @@ -122,6 +121,8 @@ static const char * const armada_375_dt_compat[] = { }; DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, @@ -134,6 +135,8 @@ static const char * const armada_38x_dt_compat[] = { }; DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 4a1065e41e9c..9116ca476d7c 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -143,23 +143,16 @@ static int __init cpu8815_mmcsd_init(void) } device_initcall(cpu8815_mmcsd_init); -static void __init cpu8815_init_of(void) -{ -#ifdef CONFIG_CACHE_L2X0 - /* At full speed latency must be >=2, so 0x249 in low bits */ - l2x0_of_init(0x00730249, 0xfe000fff); -#endif - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * cpu8815_board_compat[] = { "calaosystems,usb-s8815", NULL, }; DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + /* At full speed latency must be >=2, so 0x249 in low bits */ + .l2c_aux_val = 0x00700249, + .l2c_aux_mask = 0xfe0fefff, .map_io = cpu8815_map_io, - .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, MACHINE_END diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index cb31d4390d52..0ba482638ebf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,7 @@ config SOC_AM43XX select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC + select MIGHT_HAVE_CACHE_L2X0 config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 43a90c8d6837..9cfebc5c7455 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -48,7 +48,7 @@ static struct omap_dss_board_info rx51_dss_board_info = { static int __init rx51_video_init(void) { - if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900")) + if (!machine_is_nokia_rx51()) return 0; if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 2649ce445845..332af927f4d3 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return 1; - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) @@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return __clk_get_rate(dd->clk_bypass); - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index d88aff7baff8..ff029737c8f0 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,6 +91,7 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +int omap_l2_cache_init(void); extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ab43755364f5..9fe8c949305c 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -501,7 +501,7 @@ static int gpmc_cs_delete_mem(int cs) int r; spin_lock(&gpmc_mem_lock); - r = release_resource(&gpmc_cs_mem[cs]); + r = release_resource(res); res->start = 0; res->end = 0; spin_unlock(&gpmc_mem_lock); @@ -527,6 +527,14 @@ static int gpmc_cs_remap(int cs, u32 base) pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; } + + /* + * Make sure we ignore any device offsets from the GPMC partition + * allocated for the chip select and that the new base confirms + * to the GPMC 16MB minimum granularity. + */ + base &= ~(SZ_16M - 1); + gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; @@ -586,6 +594,8 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { + struct resource *res = &gpmc_cs_mem[cs]; + spin_lock(&gpmc_mem_lock); if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); @@ -594,7 +604,8 @@ void gpmc_cs_free(int cs) return; } gpmc_cs_disable_mem(cs); - release_resource(&gpmc_cs_mem[cs]); + if (res->flags) + release_resource(res); gpmc_cs_set_reserved(cs, 0); spin_unlock(&gpmc_mem_lock); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f14f9ac2dca1..4e2df49991ad 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -609,6 +609,7 @@ void __init am43xx_init_early(void) am43xx_clockdomains_init(); am43xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = am43xx_dt_clk_init; } @@ -640,6 +641,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); + omap_l2_cache_init(); omap_clk_soc_init = omap4xxx_dt_clk_init; } diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 75e92952c18e..40c5d5f1451c 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -1,7 +1,7 @@ /* * Secondary CPU startup routine source file. * - * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009-2014 Texas Instruments, Inc. * * Author: * Santosh Shilimkar <santosh.shilimkar@ti.com> @@ -28,9 +28,13 @@ * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. * The primary core will update this flag using a hardware -+ * register AuxCoreBoot0. + * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) +.arm +THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. +THUMB( bx r9 ) @ If this is a Thumb-2 kernel, +THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 667915d236f3..61cb77f8cf12 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -187,19 +187,15 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) * in every restore MPUSS OFF path. */ #ifdef CONFIG_CACHE_L2X0 -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) { - u32 val; - void __iomem *l2x0_base = omap4_get_l2cache_base(); - if (l2x0_base) { - val = __raw_readl(l2x0_base + L2X0_AUX_CTRL); - __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET); - val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL); - __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET); - } + __raw_writel(l2x0_saved_regs.aux_ctrl, + sar_base + L2X0_AUXCTRL_OFFSET); + __raw_writel(l2x0_saved_regs.prefetch_ctrl, + sar_base + L2X0_PREFETCH_CTRL_OFFSET); } #else -static void save_l2x0_context(void) +static void __init save_l2x0_context(void) {} #endif diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 95e171a055f3..c41ff8b638e1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -167,75 +167,57 @@ void __iomem *omap4_get_l2cache_base(void) return l2cache_base; } -static void omap4_l2x0_disable(void) +static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) { - outer_flush_all(); - /* Disable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x0); -} + unsigned smc_op; -static void omap4_l2x0_set_debug(unsigned long val) -{ - /* Program PL310 L2 Cache controller debug register */ - omap_smc1(0x100, val); + switch (reg) { + case L2X0_CTRL: + smc_op = OMAP4_MON_L2X0_CTRL_INDEX; + break; + + case L2X0_AUX_CTRL: + smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX; + break; + + case L2X0_DEBUG_CTRL: + smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX; + break; + + case L310_PREFETCH_CTRL: + smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX; + break; + + default: + WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg); + return; + } + + omap_smc1(smc_op, val); } -static int __init omap_l2_cache_init(void) +int __init omap_l2_cache_init(void) { - u32 aux_ctrl = 0; - - /* - * To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!cpu_is_omap44xx()) - return -ENODEV; + u32 aux_ctrl; /* Static mapping, never released */ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); if (WARN_ON(!l2cache_base)) return -ENOMEM; - /* - * 16-way associativity, parity disabled - * Way size - 32KB (es1.0) - * Way size - 64KB (es2.0 +) - */ - aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) | - (0x1 << 25) | - (0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) | - (0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT)); - - if (omap_rev() == OMAP4430_REV_ES1_0) { - aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT; - } else { - aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT)); - } - if (omap_rev() != OMAP4430_REV_ES1_0) - omap_smc1(0x109, aux_ctrl); - - /* Enable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x1); + /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ + aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH; + outer_cache.write_sec = omap4_l2c310_write_sec; if (of_have_populated_dt()) - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + l2x0_of_init(aux_ctrl, 0xcf9fffff); else - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); - - /* - * Override default outer_cache.disable with a OMAP4 - * specific one - */ - outer_cache.disable = omap4_l2x0_disable; - outer_cache.set_debug = omap4_l2x0_set_debug; + l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff); return 0; } -omap_early_initcall(omap_l2_cache_init); #endif void __iomem *omap4_get_sar_ram_base(void) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 1f33f5db10d5..66c60fe1104c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2546,11 +2546,12 @@ static int __init _init(struct omap_hwmod *oh, void *data) return -EINVAL; } - if (np) + if (np) { if (of_find_property(np, "ti,no-reset-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + } oh->_state = _HWMOD_STATE_INITIALIZED; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index a123ff0070bd..71ac7d5f3385 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1964,7 +1964,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .name = "usb_host_hs", .class = &omap3xxx_usb_host_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "usbhost_clkdm", .mpu_irqs = omap3xxx_usb_host_hs_irqs, .main_clk = "usbhost_48m_fck", .prcm = { @@ -2047,7 +2047,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { .name = "usb_tll_hs", .class = &omap3xxx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "core_l4_clkdm", .mpu_irqs = omap3xxx_usb_tll_hs_irqs, .main_clk = "usbtll_fck", .prcm = { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1f3770a8a728..87099bb6de69 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -330,10 +330,6 @@ void omap_sram_idle(void) omap3_sram_restore_context(); omap2_sms_restore_context(); } - if (core_next_state == PWRDM_POWER_OFF) - omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, - OMAP3430_GR_MOD, - OMAP3_PRM_VOLTCTRL_OFFSET); } omap3_intc_resume_idle(); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 175ec4ca8df6..ca3803017c59 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -21,7 +21,7 @@ struct mv_sata_platform_data; #define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f #define ORION_MBUS_DEVBUS_TARGET(cs) 0x01 #define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs)) -#define ORION_MBUS_SRAM_TARGET 0x00 +#define ORION_MBUS_SRAM_TARGET 0x09 #define ORION_MBUS_SRAM_ATTR 0x00 /* diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 7a6b4a323125..8846e7d87ea5 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -2,7 +2,6 @@ obj-y += rstc.o obj-y += common.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o -obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 47c7819edb9b..a860ea27e8ae 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -34,6 +34,8 @@ static const char *atlas6_dt_match[] __initconst = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, @@ -48,6 +50,8 @@ static const char *prima2_dt_match[] __initconst = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = sirfsoc_map_io, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, @@ -63,6 +67,8 @@ static const char *marco_dt_match[] __initconst = { DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c deleted file mode 100644 index c7102539c0b0..000000000000 --- a/arch/arm/mach-prima2/l2x0.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * l2 cache initialization for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <asm/hardware/cache-l2x0.h> - -struct l2x0_aux { - u32 val; - u32 mask; -}; - -static const struct l2x0_aux prima2_l2x0_aux __initconst = { - .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, - .mask = 0, -}; - -static const struct l2x0_aux marco_l2x0_aux __initconst = { - .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | - (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), - .mask = L2X0_AUX_CTRL_MASK, -}; - -static const struct of_device_id sirf_l2x0_ids[] __initconst = { - { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, - { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, - {}, -}; - -static int __init sirfsoc_l2x0_init(void) -{ - struct device_node *np; - const struct l2x0_aux *aux; - - np = of_find_matching_node(NULL, sirf_l2x0_ids); - if (np) { - aux = of_match_node(sirf_l2x0_ids, np)->data; - return l2x0_of_init(aux->val, aux->mask); - } - - return 0; -} -early_initcall(sirfsoc_l2x0_init); diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index c4525a88e5da..96e9bc102117 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -71,7 +71,6 @@ static int sirfsoc_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: sirfsoc_pre_suspend_power_off(); - outer_flush_all(); outer_disable(); /* go zzz */ cpu_suspend(0, sirfsoc_finish_suspend); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 8bc02913517c..0e1bb46264f9 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -14,6 +14,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c85ddb2a0ad0..b575895037b8 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -442,8 +442,13 @@ static void __init realview_eb_init(void) realview_eb11mp_fixup(); #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 6abf6a037b9e..aad9c5a40d47 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -353,7 +353,13 @@ static void __init realview_pb1176_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 128kB (16kB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 0011 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); #endif diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index f4b0962578fe..101deaf2630b 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -337,8 +337,13 @@ static void __init realview_pb11mp_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled - * Bits: .... ...0 0111 1001 0000 .... .... .... */ + /* + * The PL220 needs to be manually configured as the hardware + * doesn't report the correct sizes. + * 1MB (128KB/way), 8-way associativity, event monitor and + * parity enabled, ignore share bit, no force write allocate + * Bits: .... ...0 0111 1001 0000 .... .... .... + */ l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 60d322ad9db4..535697abfd91 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -367,8 +367,8 @@ static void __init realview_pbx_init(void) __io_address(REALVIEW_PBX_TILE_L220_BASE); /* set RAM latencies to 1 cycle for eASIC */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); /* 16KB way size, 8-way associativity, parity disabled * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index dbfa5a26cfff..072842f6491b 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -152,7 +152,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu"); if (!node) { - pr_err("%s: could not find sram dt node\n", __func__); + pr_err("%s: could not find pmu dt node\n", __func__); return; } diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d211d6fa0d98..138b9975313a 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -24,12 +24,6 @@ #include <asm/hardware/cache-l2x0.h> #include "core.h" -static void __init rockchip_dt_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char * const rockchip_board_dt_compat[] = { "rockchip,rk2928", "rockchip,rk3066a", @@ -39,7 +33,8 @@ static const char * const rockchip_board_dt_compat[] = { }; DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(rockchip_smp_ops), - .init_machine = rockchip_dt_init, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 57d1a78367b6..39e11f48e8bc 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -164,8 +164,8 @@ static void __init eva_init(void) r8a7740_meram_workaround(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif r8a7740_add_standard_devices_dt(); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2858f380beae..f8e25fd29b79 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -992,6 +992,7 @@ static struct asoc_simple_card_info fsi_wm8978_info = { .platform = "sh_fsi2", .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { + .fmt = SND_SOC_DAIFMT_IB_NF, .name = "fsia-dai", }, .codec_dai = { @@ -1270,8 +1271,8 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); + /* Shared attribute override enable, 32K*8way */ + l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 598e32488410..a735a1d80c28 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -36,8 +36,8 @@ static void __init kzm_init(void) sh73a0_add_standard_devices_dt(); #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif } diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 03dc3ac84502..f94ec8ca42c1 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -876,8 +876,8 @@ static void __init kzm_init(void) gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); + /* Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f0104bfe544e..18c7e0311aa6 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -588,14 +588,12 @@ static struct asoc_simple_card_info rsnd_card_info = { .card = "SSI01-AK4643", .codec = "ak4642-codec.2-0012", .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J, + .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { .name = "rcar_sound", - .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "ak4642-hifi", - .fmt = SND_SOC_DAIFMT_CBM_CFM, .sysclk = 11289600, }, }; diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 2009a9bc6356..9989b1b06ffd 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -170,7 +170,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ + [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 6d694526e4ca..6dd7ddf88741 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -298,10 +298,10 @@ void __init r8a7778_add_dt_devices(void) void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); if (base) { /* - * Early BRESP enable, Shared attribute override enable, 64K*16way + * Shared attribute override enable, 64K*16way * don't call iounmap(base) */ - l2x0_init(base, 0x40470000, 0x82000fff); + l2x0_init(base, 0x00400000, 0xc20f0fff); } #endif diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 8e860b36997a..a6630fccfc45 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -700,8 +700,8 @@ static struct platform_device *r8a7779_standard_devices[] __initdata = { void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 - /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); + /* Shared attribute override enable, 64K*16way */ + l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index d86231e11b34..adbf38314ca8 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -98,22 +98,17 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } -static void __init socfpga_cyclone5_init(void) -{ - l2x0_of_init(0, ~0UL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *altera_dt_match[] = { "altr,socfpga", NULL }; DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, - .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, MACHINE_END diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S index ed85473a047f..c52192dc3d9f 100644 --- a/arch/arm/mach-spear/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S @@ -3,7 +3,7 @@ * * Picked from realview * Copyright (c) 2012 ST Microelectronics Limited - * Shiraz Hashim <shiraz.hashim@st.com> + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 5c4a19887b2b..fd4297713d67 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -4,7 +4,7 @@ * based upon linux/arch/arm/mach-realview/platsmp.c * * Copyright (C) 2012 ST Microelectronics Ltd. - * Shiraz Hashim <shiraz.hashim@st.com> + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,6 +20,18 @@ #include <mach/spear.h> #include "generic.h" +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + sync_cache_w(&pen_release); +} + static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IOMEM(VA_SCU_BASE); @@ -30,8 +42,7 @@ static void spear13xx_secondary_init(unsigned int cpu) * let the primary processor know we're out of the * pen, then head off into the C entry point */ - pen_release = -1; - smp_wmb(); + write_pen_release(-1); /* * Synchronise with the boot thread. @@ -58,9 +69,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - pen_release = cpu; - flush_cache_all(); - outer_flush_all(); + write_pen_release(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 7aa6e8cf830f..c9897ea38980 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -38,15 +38,15 @@ void __init spear13xx_l2x0_init(void) if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return; - writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); + writel_relaxed(0x06, VA_L2CC_BASE + L310_PREFETCH_CTRL); /* * Program following latencies in order to make * SPEAr1340 work at 600 MHz */ - writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL); - l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff); + writel_relaxed(0x221, VA_L2CC_BASE + L310_TAG_LATENCY_CTRL); + writel_relaxed(0x441, VA_L2CC_BASE + L310_DATA_LATENCY_CTRL); + l2x0_init(VA_L2CC_BASE, 0x30a00001, 0xfe0fffff); } /* diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 218ba5b67d92..26fda4ed4d51 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -2,7 +2,7 @@ * arch/arm/plat-spear/time.c * * Copyright (C) 2010 ST Microelectronics - * Shiraz Hashim<shiraz.hashim@st.com> + * Shiraz Hashim<shiraz.linux.kernel@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -71,7 +71,7 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long evt, struct clock_event_device *clk_event_dev); -static void spear_clocksource_init(void) +static void __init spear_clocksource_init(void) { u32 tick_rate; u16 val; diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 1217fb598cfd..910e978dfbc0 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -14,25 +14,6 @@ #include "smp.h" -void __init stih41x_l2x0_init(void) -{ - u32 way_size = 0x4; - u32 aux_ctrl; - /* may be this can be encoded in macros like BIT*() */ - aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | - (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | - (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | - (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - - l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); -} - -static void __init stih41x_machine_init(void) -{ - stih41x_l2x0_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", @@ -40,7 +21,11 @@ static const char *stih41x_dt_match[] __initdata = { }; DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") - .init_machine = stih41x_machine_init, - .smp = smp_ops(sti_smp_ops), .dt_compat = stih41x_dt_match, + .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH | + L2C_AUX_CTRL_WAY_SIZE(4), + .l2c_aux_mask = 0xc0000fff, + .smp = smp_ops(sti_smp_ops), MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 92d660f9610f..55b305d51669 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -70,7 +70,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -config TEGRA_EMC_SCALING_ENABLE - bool "Enable scaling the memory frequency" - endmenu diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 6e92a7c2ecbd..f4a89698e5b0 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -35,8 +35,6 @@ void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); -extern unsigned long l2x0_saved_regs_addr; - void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 8c1ba4fea384..578d4d1ad648 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -19,7 +19,6 @@ #include <asm/cache.h> #include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" #include "fuse.h" @@ -78,8 +77,10 @@ ENTRY(tegra_resume) str r1, [r0] #endif +#ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ - l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + bl l2c310_early_resume +#endif end_ca9_scu_l2_resume: mov32 r9, 0xc0f cmp r8, r9 @@ -89,12 +90,6 @@ end_ca9_scu_l2_resume: ENDPROC(tegra_resume) #endif -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_saved_regs_addr -l2x0_saved_regs_addr: - .long 0 -#endif - .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index a4edbb3abd3d..339fe42cd6fb 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -120,37 +120,6 @@ mov \tmp1, \tmp1, lsr #8 .endm -/* Macro to resume & re-enable L2 cache */ -#ifndef L2X0_CTRL_EN -#define L2X0_CTRL_EN 1 -#endif - -#ifdef CONFIG_CACHE_L2X0 -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - W(adr) \tmp1, \phys_l2x0_saved_regs - ldr \tmp1, [\tmp1] - ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] - ldr \tmp3, [\tmp2, #L2X0_CTRL] - tst \tmp3, #L2X0_CTRL_EN - bne exit_l2_resume - ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] - str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] - str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] - str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] - str \tmp3, [\tmp2, #L2X0_POWER_CTRL] - ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] - str \tmp3, [\tmp2, #L2X0_AUX_CTRL] - mov \tmp3, #L2X0_CTRL_EN - str \tmp3, [\tmp2, #L2X0_CTRL] -exit_l2_resume: -.endm -#else /* CONFIG_CACHE_L2X0 */ -.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs -.endm -#endif /* CONFIG_CACHE_L2X0 */ #else void tegra_pen_lock(void); void tegra_pen_unlock(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 6191603379e1..15ac9fcc96b1 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -70,40 +70,12 @@ u32 tegra_uart_config[3] = { 0, }; -static void __init tegra_init_cache(void) -{ -#ifdef CONFIG_CACHE_L2X0 - static const struct of_device_id pl310_ids[] __initconst = { - { .compatible = "arm,pl310-cache", }, - {} - }; - - struct device_node *np; - int ret; - void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; - u32 aux_ctrl, cache_type; - - np = of_find_matching_node(NULL, pl310_ids); - if (!np) - return; - - cache_type = readl(p + L2X0_CACHE_TYPE); - aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x7C400001; - - ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); - if (!ret) - l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); -#endif -} - static void __init tegra_init_early(void) { of_register_trusted_foundations(); tegra_apb_io_init(); tegra_init_fuse(); tegra_cpu_reset_handler_init(); - tegra_init_cache(); tegra_powergate_init(); tegra_hotplug_init(); } @@ -191,8 +163,10 @@ static const char * const tegra_dt_board_compat[] = { }; DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") - .map_io = tegra_map_common_io, + .l2c_aux_val = 0x3c400001, + .l2c_aux_mask = 0xc20fc3fe, .smp = smp_ops(tegra_smp_ops), + .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 264f894c0e3d..842ebedbdd1c 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -35,10 +35,16 @@ static int __init ux500_l2x0_unlock(void) return 0; } -static int __init ux500_l2x0_init(void) +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) { - u32 aux_val = 0x3e000000; + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} +static int __init ux500_l2x0_init(void) +{ if (cpu_is_u8500_family() || cpu_is_ux540_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else @@ -48,28 +54,12 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); - /* DBx540's L2 has 128KB way size */ - if (cpu_is_ux540_family()) - /* 128KB way size */ - aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); - else - /* 64KB way size */ - aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + outer_cache.write_sec = ux500_l2c310_write_sec; - /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(aux_val, 0xc0000fff); + l2x0_of_init(0, ~0); else - l2x0_init(l2x0_base, aux_val, 0xc0000fff); - - /* - * We can't disable l2 as we are in non secure mode, currently - * this seems be called only during kexec path. So let's - * override outer.disable with nasty assignment until we have - * some SMI service available. - */ - outer_cache.disable = NULL; - outer_cache.set_debug = NULL; + l2x0_init(l2x0_base, 0, ~0); return 0; } diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 6f34497a4245..204038ef3795 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -45,6 +45,23 @@ static void __init ct_ca9x4_map_io(void) iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } +static void __init ca9x4_l2_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); + + if (l2x0_base) { + /* set RAM latencies to 1 cycle for this core tile. */ + writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); + + l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); + } else { + pr_err("L2C: unable to map L2 cache controller\n"); + } +#endif +} + #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER); @@ -63,6 +80,7 @@ static void __init ct_ca9x4_init_irq(void) gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K), ioremap(A9_MPCORE_GIC_CPU, SZ_256)); ca9x4_twd_init(); + ca9x4_l2_init(); } static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) @@ -141,16 +159,6 @@ static void __init ct_ca9x4_init(void) { int i; -#ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); - - /* set RAM latencies to 1 cycle for this core tile. */ - writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); - - l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); -#endif - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 788495d35cf9..30b993399ed7 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -51,12 +51,14 @@ static int dcscb_allcpus_mask[2]; static int dcscb_power_up(unsigned int cpu, unsigned int cluster) { unsigned int rst_hold, cpumask = (1 << cpu); - unsigned int all_mask = dcscb_allcpus_mask[cluster]; + unsigned int all_mask; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (cpu >= 4 || cluster >= 2) return -EINVAL; + all_mask = dcscb_allcpus_mask[cluster]; + /* * Since this is called with IRQs enabled, and no arch_spin_lock_irq * variant exists, we need to disable IRQs manually here. @@ -101,11 +103,12 @@ static void dcscb_power_down(void) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); cpumask = (1 << cpu); - all_mask = dcscb_allcpus_mask[cluster]; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= 4 || cluster >= 2); + all_mask = dcscb_allcpus_mask[cluster]; + __mcpm_cpu_going_down(cpu, cluster); arch_spin_lock(&dcscb_lock); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index c26ef5b92ca7..2c2754e79cb3 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -392,7 +392,7 @@ static irqreturn_t ve_spc_irq_handler(int irq, void *data) * +--------------------------+ * | 31 20 | 19 0 | * +--------------------------+ - * | u_volt | freq(kHz) | + * | m_volt | freq(kHz) | * +--------------------------+ */ #define MULT_FACTOR 20 @@ -414,7 +414,7 @@ static int ve_spc_populate_opps(uint32_t cluster) ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data); if (!ret) { opps->freq = (data & FREQ_MASK) * MULT_FACTOR; - opps->u_volt = data >> VOLT_SHIFT; + opps->u_volt = (data >> VOLT_SHIFT) * 1000; } else { break; } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 4f8b8cb17ff5..b2fea70d412d 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -432,7 +432,6 @@ static const struct of_device_id v2m_dt_bus_match[] __initconst = { static void __init v2m_dt_init(void) { - l2x0_of_init(0x00400000, 0xfe0fffff); of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); } @@ -443,6 +442,8 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, + .l2c_aux_val = 0x00400000, + .l2c_aux_mask = 0xfe0fffff, .smp = smp_ops(vexpress_smp_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6fcc584c1a11..d1e992e6403e 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -67,11 +67,6 @@ static void __init zynq_init_machine(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; - /* - * 64KB way size, 8-way associativity, parity disabled - */ - l2x0_of_init(0x02060000, 0xF0F0FFFF); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register(&zynq_cpuidle_device); @@ -133,6 +128,9 @@ static const char * const zynq_dt_match[] = { }; DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") + /* 64KB way size, 8-way associativity, parity disabled */ + .l2c_aux_val = 0x02000000, + .l2c_aux_mask = 0xf0ffffff, .smp = smp_ops(zynq_smp_ops), .map_io = zynq_map_io, .init_irq = zynq_irq_init, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index f5ad9ee70426..eda0dd0ab97b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -420,29 +420,29 @@ config CPU_32v3 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v6 bool @@ -897,6 +897,57 @@ config CACHE_PL310 This option enables optimisations for the PL310 cache controller. +config PL310_ERRATA_588369 + bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. + +config PL310_ERRATA_727915 + bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" + depends on CACHE_L2X0 + help + PL310 implements the Clean & Invalidate by Way L2 cache maintenance + operation (offset 0x7FC). This operation runs in background so that + PL310 can handle normal accesses while it is in progress. Under very + rare circumstances, due to this erratum, write data can be lost when + PL310 treats a cacheable write transaction during a Clean & + Invalidate by Way operation. + +config PL310_ERRATA_753970 + bool "PL310 errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + +config PL310_ERRATA_769419 + bool "PL310 errata: no automatic Store Buffer drain" + depends on CACHE_L2X0 + help + On revisions of the PL310 prior to r3p2, the Store Buffer does + not automatically drain. This can cause normal, non-cacheable + writes to be retained when the memory system is idle, leading + to suboptimal I/O performance for drivers using coherent DMA. + This option adds a write barrier to the cpu_idle loop so that, + on systems with an outer cache, the store buffer is drained + explicitly. + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 7f39ce2f841f..91da64de440f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -95,7 +95,8 @@ obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 AFLAGS_proc-v7.o :=-Wa,-march=armv7-a +obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 924036473b16..b8cb1a2688a0 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -28,6 +28,7 @@ #include <asm/opcodes.h> #include "fault.h" +#include "mm.h" /* * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998 @@ -81,6 +82,7 @@ static unsigned long ai_word; static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; +static unsigned long cr_no_alignment; core_param(alignment, ai_usermode, int, 0600); @@ -91,7 +93,7 @@ core_param(alignment, ai_usermode, int, 0600); /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { - return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); + return cpu_architecture() >= CPU_ARCH_ARMv6 && get_cr() & CR_U; } static int safe_usermode(int new_usermode, bool warn) @@ -949,6 +951,13 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 0; } +static int __init noalign_setup(char *__unused) +{ + set_cr(__clear_cr(CR_A)); + return 1; +} +__setup("noalign", noalign_setup); + /* * This needs to be done after sysctl_init, otherwise sys/ will be * overwritten. Actually, this shouldn't be in sys/ at all since @@ -966,14 +975,12 @@ static int __init alignment_init(void) return -ENOMEM; #endif -#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned()) { - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); + set_cr(__clear_cr(CR_A)); ai_usermode = safe_usermode(ai_usermode, false); } -#endif + + cr_no_alignment = get_cr() & ~CR_A; hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dc814a548056..e028a7f2ebcc 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -350,7 +350,6 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; - outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 7abde2ce8973..efc5cabf70e0 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,18 +16,33 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cpu.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/smp.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/cputype.h> #include <asm/hardware/cache-l2x0.h> #include "cache-tauros3.h" #include "cache-aurora-l2.h" +struct l2c_init_data { + const char *type; + unsigned way_size_0; + unsigned num_lock; + void (*of_parse)(const struct device_node *, u32 *, u32 *); + void (*enable)(void __iomem *, u32, unsigned); + void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); + void (*save)(void __iomem *); + struct outer_cache_fns outer_cache; +}; + #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; @@ -36,96 +51,116 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; -/* Aurora don't have the cache ID register available, so we have to - * pass it though the device tree */ -static u32 cache_id_part_number_from_dt; - struct l2x0_regs l2x0_saved_regs; -struct l2x0_of_data { - void (*setup)(const struct device_node *, u32 *, u32 *); - void (*save)(void); - struct outer_cache_fns outer_cache; -}; - -static bool of_init = false; - -static inline void cache_wait_way(void __iomem *reg, unsigned long mask) +/* + * Common code for all cache controllers. + */ +static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) cpu_relax(); } -#ifdef CONFIG_CACHE_PL310 -static inline void cache_wait(void __iomem *reg, unsigned long mask) +/* + * By default, we write directly to secure registers. Platforms must + * override this if they are running non-secure. + */ +static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) { - /* cache operations by line are atomic on PL310 */ + if (val == readl_relaxed(base + reg)) + return; + if (outer_cache.write_sec) + outer_cache.write_sec(val, reg); + else + writel_relaxed(val, base + reg); } -#else -#define cache_wait cache_wait_way -#endif -static inline void cache_sync(void) +/* + * This should only be called when we have a requirement that the + * register be written due to a work-around, as platforms running + * in non-secure mode may not be able to access this register. + */ +static inline void l2c_set_debug(void __iomem *base, unsigned long val) { - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + sync_reg_offset); - cache_wait(base + L2X0_CACHE_SYNC, 1); + l2c_write_sec(val, base, L2X0_DEBUG_CTRL); } -static inline void l2x0_clean_line(unsigned long addr) +static void __l2c_op_way(void __iomem *reg) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(l2x0_way_mask, reg); + l2c_wait_mask(reg, l2x0_way_mask); } -static inline void l2x0_inv_line(unsigned long addr) +static inline void l2c_unlock(void __iomem *base, unsigned num) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + unsigned i; + + for (i = 0; i < num; i++) { + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } } -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) -static inline void debug_writel(unsigned long val) +/* + * Enable the L2 cache controller. This function must only be + * called when the cache controller is known to be disabled. + */ +static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) { - if (outer_cache.set_debug) - outer_cache.set_debug(val); + unsigned long flags; + + l2c_write_sec(aux, base, L2X0_AUX_CTRL); + + l2c_unlock(base, num_lock); + + local_irq_save(flags); + __l2c_op_way(base + L2X0_INV_WAY); + writel_relaxed(0, base + sync_reg_offset); + l2c_wait_mask(base + sync_reg_offset, 1); + local_irq_restore(flags); + + l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); } -static void pl310_set_debug(unsigned long val) +static void l2c_disable(void) { - writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); + void __iomem *base = l2x0_base; + + outer_cache.flush_all(); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); } -#else -/* Optimised out for non-errata case */ -static inline void debug_writel(unsigned long val) + +#ifdef CONFIG_CACHE_PL310 +static inline void cache_wait(void __iomem *reg, unsigned long mask) { + /* cache operations by line are atomic on PL310 */ } - -#define pl310_set_debug NULL +#else +#define cache_wait l2c_wait_mask #endif -#ifdef CONFIG_PL310_ERRATA_588369 -static inline void l2x0_flush_line(unsigned long addr) +static inline void cache_sync(void) { void __iomem *base = l2x0_base; - /* Clean by PA followed by Invalidate by PA */ - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA); - cache_wait(base + L2X0_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_INV_LINE_PA); + writel_relaxed(0, base + sync_reg_offset); + cache_wait(base + L2X0_CACHE_SYNC, 1); } -#else -static inline void l2x0_flush_line(unsigned long addr) +#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + l2c_set_debug(l2x0_base, val); +} +#else +/* Optimised out for non-errata case */ +static inline void debug_writel(unsigned long val) { - void __iomem *base = l2x0_base; - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA); } #endif @@ -141,8 +176,7 @@ static void l2x0_cache_sync(void) static void __l2x0_flush_all(void) { debug_writel(0x03); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); + __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY); cache_sync(); debug_writel(0x00); } @@ -157,275 +191,883 @@ static void l2x0_flush_all(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_clean_all(void) +static void l2x0_disable(void) { unsigned long flags; - /* clean all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY); - cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask); - cache_sync(); + __l2x0_flush_all(); + l2c_write_sec(0, l2x0_base, L2X0_CTRL); + dsb(st); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_inv_all(void) +static void l2c_save(void __iomem *base) { - unsigned long flags; + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} - /* invalidate all ways */ - raw_spin_lock_irqsave(&l2x0_lock, flags); - /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); +/* + * L2C-210 specific code. + * + * The L2C-2x0 PA, set/way and sync operations are atomic, but we must + * ensure that no background operation is running. The way operations + * are all background tasks. + * + * While a background operation is in progress, any new operation is + * ignored (unspecified whether this causes an error.) Thankfully, not + * used on SMP. + * + * Never has a different sync register other than L2X0_CACHE_SYNC, but + * we use sync_reg_offset here so we can share some of this with L2C-310. + */ +static void __l2c210_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + sync_reg_offset); } -static void l2x0_inv_range(unsigned long start, unsigned long end) +static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end) +{ + while (start < end) { + writel_relaxed(start, reg); + start += CACHE_LINE_SIZE; + } +} + +static void l2c210_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; - unsigned long flags; - raw_spin_lock_irqsave(&l2x0_lock, flags); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(start); - debug_writel(0x00); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); - debug_writel(0x03); - l2x0_flush_line(end); - debug_writel(0x00); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_clean_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + start &= ~(CACHE_LINE_SIZE - 1); + __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c210_flush_all(void) +{ + void __iomem *base = l2x0_base; + + BUG_ON(!irqs_disabled()); + + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + __l2c210_cache_sync(base); +} + +static void l2c210_sync(void) +{ + __l2c210_cache_sync(l2x0_base); +} + +static void l2c210_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1); +} + +static const struct l2c_init_data l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-220 specific code. + * + * All operations are background operations: they have to be waited for. + * Conflicting requests generate a slave error (which will cause an + * imprecise abort.) Never uses sync_reg_offset, so we hard-code the + * sync register here. + * + * However, we can re-use the l2c210_resume call. + */ +static inline void __l2c220_cache_sync(void __iomem *base) +{ + writel_relaxed(0, base + L2X0_CACHE_SYNC); + l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); +} + +static void l2c220_op_way(void __iomem *base, unsigned reg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + reg); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, + unsigned long end, unsigned long flags) +{ + raw_spinlock_t *lock = &l2x0_lock; + while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { - l2x0_inv_line(start); + l2c_wait_mask(reg, 1); + writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + return flags; } -static void l2x0_clean_range(unsigned long start, unsigned long end) +static void l2c220_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - raw_spin_lock_irqsave(&l2x0_lock, flags); - start &= ~(CACHE_LINE_SIZE - 1); - while (start < end) { - unsigned long blk_end = start + min(end - start, 4096UL); - - while (start < blk_end) { - l2x0_clean_line(start); + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } - if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } } - cache_wait(base + L2X0_CLEAN_LINE_PA, 1); - cache_sync(); + + flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); + __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_range(unsigned long start, unsigned long end) +static void l2c220_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + l2c220_op_way(base, L2X0_CLEAN_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_range(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + unsigned long flags; + start &= ~(CACHE_LINE_SIZE - 1); + if ((end - start) >= l2x0_size) { + l2c220_op_way(base, L2X0_CLEAN_INV_WAY); + return; + } + + raw_spin_lock_irqsave(&l2x0_lock, flags); + flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, + start, end, flags); + l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); + __l2c220_cache_sync(base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_flush_all(void) +{ + l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); +} + +static void l2c220_sync(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c220_cache_sync(l2x0_base); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L220_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); +} + +static const struct l2c_init_data l2c220_data = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +/* + * L2C-310 specific code. + * + * Very similar to L2C-210, the PA, set/way and sync operations are atomic, + * and the way operations are all background tasks. However, issuing an + * operation while a background operation is in progress results in a + * SLVERR response. We can reuse: + * + * __l2c210_cache_sync (using sync_reg_offset) + * l2c210_sync + * l2c210_inv_range (if 588369 is not applicable) + * l2c210_clean_range + * l2c210_flush_range (if 588369 is not applicable) + * l2c210_flush_all (if 727915 is not applicable) + * + * Errata: + * 588369: PL310 R0P0->R1P0, fixed R2P0. + * Affects: all clean+invalidate operations + * clean and invalidate skips the invalidate step, so we need to issue + * separate operations. We also require the above debug workaround + * enclosing this code fragment on affected parts. On unaffected parts, + * we must not use this workaround without the debug register writes + * to avoid exposing a problem similar to 727915. + * + * 727915: PL310 R2P0->R3P0, fixed R3P1. + * Affects: clean+invalidate by way + * clean and invalidate by way runs in the background, and a store can + * hit the line between the clean operation and invalidate operation, + * resulting in the store being lost. + * + * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. + * Affects: 8x64-bit (double fill) line fetches + * double fill line fetches can fail to cause dirty data to be evicted + * from the cache before the new data overwrites the second line. + * + * 753970: PL310 R3P0, fixed R3P1. + * Affects: sync + * prevents merging writes after the sync operation, until another L2C + * operation is performed (or a number of other conditions.) + * + * 769419: PL310 R0P0->R3P1, fixed R3P2. + * Affects: store buffer + * store buffer is not automatically drained. + */ +static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) +{ + void __iomem *base = l2x0_base; + + if ((start | end) & (CACHE_LINE_SIZE - 1)) { + unsigned long flags; + + /* Erratum 588369 for both clean+invalidate operations */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + l2c_set_debug(base, 0x03); + + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(end, base + L2X0_INV_LINE_PA); + } + + l2c_set_debug(base, 0x00); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + } + + __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); + __l2c210_cache_sync(base); +} + +static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) +{ + raw_spinlock_t *lock = &l2x0_lock; + unsigned long flags; + void __iomem *base = l2x0_base; + + raw_spin_lock_irqsave(lock, flags); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); - debug_writel(0x03); + l2c_set_debug(base, 0x03); while (start < blk_end) { - l2x0_flush_line(start); + writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); + writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } - debug_writel(0x00); + l2c_set_debug(base, 0x00); if (blk_end < end) { - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - raw_spin_lock_irqsave(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + raw_spin_lock_irqsave(lock, flags); } } - cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + raw_spin_unlock_irqrestore(lock, flags); + __l2c210_cache_sync(base); } -static void l2x0_disable(void) +static void l2c310_flush_all_erratum(void) { + void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - writel_relaxed(0, l2x0_base + L2X0_CTRL); - dsb(st); + l2c_set_debug(base, 0x03); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + l2c_set_debug(base, 0x00); + __l2c210_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(u32 cache_id) +static void __init l2c310_save(void __iomem *base) { - int lockregs; - int i; + unsigned revision; - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { - case L2X0_CACHE_ID_PART_L310: - lockregs = 8; - break; - case AURORA_CACHE_ID: - lockregs = 4; + l2c_save(base); + + l2x0_saved_regs.tag_latency = readl_relaxed(base + + L310_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(base + + L310_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(base + + L310_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(base + + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + /* From r2p0, there is Prefetch offset/control register */ + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + + L310_PREFETCH_CTRL); + + /* From r3p0, there is Power control register */ + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + + L310_POWER_CTRL); +} + +static void l2c310_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + unsigned revision; + + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + base + L310_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + base + L310_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + base + L310_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + base + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); + + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + } +} + +static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) +{ + switch (act & ~CPU_TASKS_FROZEN) { + case CPU_STARTING: + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); break; - default: - /* L210 and unknown types */ - lockregs = 1; + case CPU_DYING: + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); break; } + return NOTIFY_OK; +} - for (i = 0; i < lockregs; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); +static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) +{ + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + + if (rev >= L310_CACHE_ID_RTL_R2P0) { + if (cortex_a9) { + aux |= L310_AUX_CTRL_EARLY_BRESP; + pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); + } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { + pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); + aux &= ~L310_AUX_CTRL_EARLY_BRESP; + } + } + + if (cortex_a9) { + u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); + u32 acr = get_auxcr(); + + pr_debug("Cortex-A9 ACR=0x%08x\n", acr); + + if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) + pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) + pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); + + if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { + aux |= L310_AUX_CTRL_FULL_LINE_ZERO; + pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); + } + } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { + pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); + aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); + } + + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { + u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); + + pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", + aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", + aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", + 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); + } + + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) { + u32 power_ctrl; + + l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN, + base, L310_POWER_CTRL); + power_ctrl = readl_relaxed(base + L310_POWER_CTRL); + pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", + power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", + power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); + } + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); + + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + cpu_notifier(l2c310_cpu_enable_flz, 0); } } -void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +static void __init l2c310_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) { - u32 aux; - u32 cache_id; - u32 way_size = 0; - int ways; - int way_size_shift = L2X0_WAY_SIZE_SHIFT; - const char *type; + unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; + const char *errata[8]; + unsigned n = 0; + + if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && + revision < L310_CACHE_ID_RTL_R2P0 && + /* For bcm compatibility */ + fns->inv_range == l2c210_inv_range) { + fns->inv_range = l2c310_inv_range_erratum; + fns->flush_range = l2c310_flush_range_erratum; + errata[n++] = "588369"; + } - l2x0_base = base; - if (cache_id_part_number_from_dt) - cache_id = cache_id_part_number_from_dt; - else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && + revision >= L310_CACHE_ID_RTL_R2P0 && + revision < L310_CACHE_ID_RTL_R3P1) { + fns->flush_all = l2c310_flush_all_erratum; + errata[n++] = "727915"; + } + + if (revision >= L310_CACHE_ID_RTL_R3P0 && + revision < L310_CACHE_ID_RTL_R3P2) { + u32 val = readl_relaxed(base + L310_PREFETCH_CTRL); + /* I don't think bit23 is required here... but iMX6 does so */ + if (val & (BIT(30) | BIT(23))) { + val &= ~(BIT(30) | BIT(23)); + l2c_write_sec(val, base, L310_PREFETCH_CTRL); + errata[n++] = "752271"; + } + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && + revision == L310_CACHE_ID_RTL_R3P0) { + sync_reg_offset = L2X0_DUMMY_REG; + errata[n++] = "753970"; + } + + if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) + errata[n++] = "769419"; + + if (n) { + unsigned i; + pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); + for (i = 0; i < n; i++) + pr_cont(" %s", errata[i]); + pr_cont(" enabled\n"); + } +} + +static void l2c310_disable(void) +{ + /* + * If full-line-of-zeros is enabled, we must first disable it in the + * Cortex-A9 auxiliary control register before disabling the L2 cache. + */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + + l2c_disable(); +} + +static const struct l2c_init_data l2c310_init_fns __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + +static void __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id) +{ + struct outer_cache_fns fns; + unsigned way_size_bits, ways; + u32 aux, old_aux; + + /* + * Sanity check the aux values. aux_mask is the bits we preserve + * from reading the hardware register, and aux_val is the bits we + * set. + */ + if (aux_val & aux_mask) + pr_alert("L2C: platform provided aux values permit register corruption.\n"); + + old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; + if (old_aux != aux) + pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, aux); + /* Determine the number of ways */ switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: + if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) + pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); if (aux & (1 << 16)) ways = 16; else ways = 8; - type = "L310"; -#ifdef CONFIG_PL310_ERRATA_753970 - /* Unmapped register. */ - sync_reg_offset = L2X0_DUMMY_REG; -#endif - if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0) - outer_cache.set_debug = pl310_set_debug; break; + case L2X0_CACHE_ID_PART_L210: + case L2X0_CACHE_ID_PART_L220: ways = (aux >> 13) & 0xf; - type = "L210"; break; case AURORA_CACHE_ID: - sync_reg_offset = AURORA_SYNC_REG; ways = (aux >> 13) & 0xf; ways = 2 << ((ways + 1) >> 2); - way_size_shift = AURORA_WAY_SIZE_SHIFT; - type = "Aurora"; break; + default: /* Assume unknown chips have 8 ways */ ways = 8; - type = "L2x0 series"; break; } l2x0_way_mask = (1 << ways) - 1; /* - * L2 cache Size = Way size * Number of ways + * way_size_0 is the size that a way_size value of zero would be + * given the calculation: way_size = way_size_0 << way_size_bits. + * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, + * then way_size_0 would be 8k. + * + * L2 cache size = number of ways * way size. */ - way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + way_size_shift); + way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> + L2C_AUX_CTRL_WAY_SIZE_SHIFT; + l2x0_size = ways * (data->way_size_0 << way_size_bits); - l2x0_size = ways * way_size * SZ_1K; + fns = data->outer_cache; + fns.write_sec = outer_cache.write_sec; + if (data->fixup) + data->fixup(l2x0_base, cache_id, &fns); /* - * Check if l2x0 controller is already enabled. - * If you are booting from non-secure mode - * accessing the below registers will fault. + * Check if l2x0 controller is already enabled. If we are booting + * in non-secure mode accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* Make sure that I&D is not locked down when starting */ - l2x0_unlock(cache_id); + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + data->enable(l2x0_base, aux, data->num_lock); - /* l2x0 controller is disabled */ - writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + outer_cache = fns; - l2x0_inv_all(); - - /* enable L2X0 */ - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } + /* + * It is strange to save the register state before initialisation, + * but hey, this is what the DT implementations decided to do. + */ + if (data->save) + data->save(l2x0_base); /* Re-read it in case some bits are reserved. */ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); - /* Save the value for resuming. */ - l2x0_saved_regs.aux_ctrl = aux; + pr_info("%s cache controller enabled, %d ways, %d kB\n", + data->type, ways, l2x0_size >> 10); + pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + data->type, cache_id, aux); +} + +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) +{ + const struct l2c_init_data *data; + u32 cache_id; + + l2x0_base = base; + + cache_id = readl_relaxed(base + L2X0_CACHE_ID); + + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + default: + case L2X0_CACHE_ID_PART_L210: + data = &l2c210_data; + break; - if (!of_init) { - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + case L2X0_CACHE_ID_PART_L220: + data = &l2c220_data; + break; + + case L2X0_CACHE_ID_PART_L310: + data = &l2c310_init_fns; + break; } - pr_info("%s cache controller enabled\n", type); - pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n", - ways, cache_id, aux, l2x0_size >> 10); + __l2c_init(data, aux_val, aux_mask, cache_id); } #ifdef CONFIG_OF static int l2_wt_override; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + +static void __init l2x0_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_l2c210_data __initconst = { + .type = "L2C-210", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c_disable, + .sync = l2c210_sync, + .resume = l2c210_resume, + }, +}; + +static const struct l2c_init_data of_l2c220_data __initconst = { + .type = "L2C-220", + .way_size_0 = SZ_8K, + .num_lock = 1, + .of_parse = l2x0_of_parse, + .enable = l2c220_enable, + .save = l2c_save, + .outer_cache = { + .inv_range = l2c220_inv_range, + .clean_range = l2c220_clean_range, + .flush_range = l2c220_flush_range, + .flush_all = l2c220_flush_all, + .disable = l2c_disable, + .sync = l2c220_sync, + .resume = l2c210_resume, + }, +}; + +static void __init l2c310_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(tag[0] - 1) | + L310_LATENCY_CTRL_WR(tag[1] - 1) | + L310_LATENCY_CTRL_SETUP(tag[2] - 1), + l2x0_base + L310_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + L310_LATENCY_CTRL_RD(data[0] - 1) | + L310_LATENCY_CTRL_WR(data[1] - 1) | + L310_LATENCY_CTRL_SETUP(data[2] - 1), + l2x0_base + L310_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L310_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, + l2x0_base + L310_ADDR_FILTER_START); + } +} + +static const struct l2c_init_data of_l2c310_data __initconst = { + .type = "L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -524,6 +1166,100 @@ static void aurora_flush_range(unsigned long start, unsigned long end) } } +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); +} + +static void aurora_resume(void) +{ + void __iomem *base = l2x0_base; + + if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL); + writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL); + } +} + +/* + * For Aurora cache in no outer mode, enable via the CP15 coprocessor + * broadcasting of cache commands to L2. + */ +static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, + unsigned num_lock) +{ + u32 u; + + asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); + + isb(); + + l2c_enable(base, aux, num_lock); +} + +static void __init aurora_fixup(void __iomem *base, u32 cache_id, + struct outer_cache_fns *fns) +{ + sync_reg_offset = AURORA_SYNC_REG; +} + +static void __init aurora_of_parse(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static const struct l2c_init_data of_aurora_with_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = l2c_enable, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .flush_all = l2x0_flush_all, + .disable = l2x0_disable, + .sync = l2x0_cache_sync, + .resume = aurora_resume, + }, +}; + +static const struct l2c_init_data of_aurora_no_outer_data __initconst = { + .type = "Aurora", + .way_size_0 = SZ_4K, + .num_lock = 4, + .of_parse = aurora_of_parse, + .enable = aurora_enable_no_outer, + .fixup = aurora_fixup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, +}; + /* * For certain Broadcom SoCs, depending on the address range, different offsets * need to be added to the address before passing it to L2 for @@ -588,16 +1324,16 @@ static void bcm_inv_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_inv_range(new_start, new_end); + l2c210_inv_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_inv_range(new_start, + l2c210_inv_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -610,26 +1346,21 @@ static void bcm_clean_range(unsigned long start, unsigned long end) if (unlikely(end <= start)) return; - if ((end - start) >= l2x0_size) { - l2x0_clean_all(); - return; - } - new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_clean_range(new_start, new_end); + l2c210_clean_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_clean_range(new_start, + l2c210_clean_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } @@ -643,7 +1374,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end) return; if ((end - start) >= l2x0_size) { - l2x0_flush_all(); + outer_cache.flush_all(); return; } @@ -652,283 +1383,67 @@ static void bcm_flush_range(unsigned long start, unsigned long end) /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { - l2x0_flush_range(new_start, new_end); + l2c210_flush_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ - l2x0_flush_range(new_start, + l2c210_flush_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); - l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } -static void __init l2x0_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[2] = { 0, 0 }; - u32 tag = 0; - u32 dirty = 0; - u32 val = 0, mask = 0; - - of_property_read_u32(np, "arm,tag-latency", &tag); - if (tag) { - mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; - val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; - } - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1]) { - mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | - L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; - val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | - ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); - } - - of_property_read_u32(np, "arm,dirty-latency", &dirty); - if (dirty) { - mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; - val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; - } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; -} - -static void __init pl310_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 data[3] = { 0, 0, 0 }; - u32 tag[3] = { 0, 0, 0 }; - u32 filter[2] = { 0, 0 }; - - of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); - if (tag[0] && tag[1] && tag[2]) - writel_relaxed( - ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_TAG_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,data-latency", - data, ARRAY_SIZE(data)); - if (data[0] && data[1] && data[2]) - writel_relaxed( - ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | - ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | - ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), - l2x0_base + L2X0_DATA_LATENCY_CTRL); - - of_property_read_u32_array(np, "arm,filter-ranges", - filter, ARRAY_SIZE(filter)); - if (filter[1]) { - writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, - l2x0_base + L2X0_ADDR_FILTER_START); - } -} - -static void __init pl310_save(void) -{ - u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + - L2X0_TAG_LATENCY_CTRL); - l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + - L2X0_DATA_LATENCY_CTRL); - l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_END); - l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + - L2X0_ADDR_FILTER_START); - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - /* - * From r2p0, there is Prefetch offset/control register - */ - l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + - L2X0_PREFETCH_CTRL); - /* - * From r3p0, there is Power control register - */ - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + - L2X0_POWER_CTRL); - } -} +/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ +static const struct l2c_init_data of_bcm_l2x0_data __initconst = { + .type = "BCM-L2C-310", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .save = l2c310_save, + .outer_cache = { + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .sync = l2c210_sync, + .resume = l2c310_resume, + }, +}; -static void aurora_save(void) +static void __init tauros3_save(void __iomem *base) { - l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); - l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); -} + l2c_save(base); -static void __init tauros3_save(void) -{ l2x0_saved_regs.aux2_ctrl = - readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL); + readl_relaxed(base + TAUROS3_AUX2_CTRL); l2x0_saved_regs.prefetch_ctrl = - readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); -} - -static void l2x0_resume(void) -{ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore aux ctrl and enable l2 */ - l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); - - writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + - L2X0_AUX_CTRL); - - l2x0_inv_all(); - - writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); - } -} - -static void pl310_resume(void) -{ - u32 l2x0_revision; - - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - /* restore pl310 setup */ - writel_relaxed(l2x0_saved_regs.tag_latency, - l2x0_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.data_latency, - l2x0_base + L2X0_DATA_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.filter_end, - l2x0_base + L2X0_ADDR_FILTER_END); - writel_relaxed(l2x0_saved_regs.filter_start, - l2x0_base + L2X0_ADDR_FILTER_START); - - l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) - writel_relaxed(l2x0_saved_regs.pwr_ctrl, - l2x0_base + L2X0_POWER_CTRL); - } - } - - l2x0_resume(); -} - -static void aurora_resume(void) -{ - if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, - l2x0_base + L2X0_AUX_CTRL); - writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); - } + readl_relaxed(base + L310_PREFETCH_CTRL); } static void tauros3_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + void __iomem *base = l2x0_base; + + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { writel_relaxed(l2x0_saved_regs.aux2_ctrl, - l2x0_base + TAUROS3_AUX2_CTRL); + base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - l2x0_base + L2X0_PREFETCH_CTRL); - } + base + L310_PREFETCH_CTRL); - l2x0_resume(); -} - -static void __init aurora_broadcast_l2_commands(void) -{ - __u32 u; - /* Enable Broadcasting of cache commands to L2*/ - __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); - u |= AURORA_CTRL_FW; /* Set the FW bit */ - __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); - isb(); -} - -static void __init aurora_of_setup(const struct device_node *np, - u32 *aux_val, u32 *aux_mask) -{ - u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; - u32 mask = AURORA_ACR_REPLACEMENT_MASK; - - of_property_read_u32(np, "cache-id-part", - &cache_id_part_number_from_dt); - - /* Determine and save the write policy */ - l2_wt_override = of_property_read_bool(np, "wt-override"); - - if (l2_wt_override) { - val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; - mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); } - - *aux_val &= ~mask; - *aux_val |= val; - *aux_mask &= ~mask; } -static const struct l2x0_of_data pl310_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data l2x0_data = { - .setup = l2x0_of_setup, - .save = NULL, - .outer_cache = { - .resume = l2x0_resume, - .inv_range = l2x0_inv_range, - .clean_range = l2x0_clean_range, - .flush_range = l2x0_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_with_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - .inv_range = aurora_inv_range, - .clean_range = aurora_clean_range, - .flush_range = aurora_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - -static const struct l2x0_of_data aurora_no_outer_data = { - .setup = aurora_of_setup, - .save = aurora_save, - .outer_cache = { - .resume = aurora_resume, - }, -}; - -static const struct l2x0_of_data tauros3_data = { - .setup = NULL, +static const struct l2c_init_data of_tauros3_data __initconst = { + .type = "Tauros3", + .way_size_0 = SZ_8K, + .num_lock = 8, + .enable = l2c_enable, .save = tauros3_save, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { @@ -936,43 +1451,26 @@ static const struct l2x0_of_data tauros3_data = { }, }; -static const struct l2x0_of_data bcm_l2x0_data = { - .setup = pl310_of_setup, - .save = pl310_save, - .outer_cache = { - .resume = pl310_resume, - .inv_range = bcm_inv_range, - .clean_range = bcm_clean_range, - .flush_range = bcm_flush_range, - .sync = l2x0_cache_sync, - .flush_all = l2x0_flush_all, - .inv_all = l2x0_inv_all, - .disable = l2x0_disable, - }, -}; - +#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } static const struct of_device_id l2x0_ids[] __initconst = { - { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, - { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, - { .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */ - .data = (void *)&bcm_l2x0_data}, - { .compatible = "brcm,bcm11351-a2-pl310-cache", - .data = (void *)&bcm_l2x0_data}, - { .compatible = "marvell,aurora-outer-cache", - .data = (void *)&aurora_with_outer_data}, - { .compatible = "marvell,aurora-system-cache", - .data = (void *)&aurora_no_outer_data}, - { .compatible = "marvell,tauros3-cache", - .data = (void *)&tauros3_data }, + L2C_ID("arm,l210-cache", of_l2c210_data), + L2C_ID("arm,l220-cache", of_l2c220_data), + L2C_ID("arm,pl310-cache", of_l2c310_data), + L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), + L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), + L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), + L2C_ID("marvell,tauros3-cache", of_tauros3_data), + /* Deprecated IDs */ + L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), {} }; int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { + const struct l2c_init_data *data; struct device_node *np; - const struct l2x0_of_data *data; struct resource res; + u32 cache_id, old_aux; np = of_find_matching_node(NULL, l2x0_ids); if (!np) @@ -989,23 +1487,29 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; - /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { - if (data->setup) - data->setup(np, &aux_val, &aux_mask); - - /* For aurora cache in no outer mode select the - * correct mode using the coprocessor*/ - if (data == &aurora_no_outer_data) - aurora_broadcast_l2_commands(); + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + if (old_aux != ((old_aux & aux_mask) | aux_val)) { + pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", + old_aux, (old_aux & aux_mask) | aux_val); + } else if (aux_mask != ~0U && aux_val != 0) { + pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); } - if (data->save) - data->save(); + /* All L2 caches are unified, so this property should be specified */ + if (!of_property_read_bool(np, "cache-unified")) + pr_err("L2C: device tree omits to specify unified cache\n"); + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) + if (data->of_parse) + data->of_parse(np, &aux_val, &aux_mask); + + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - of_init = true; - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); - l2x0_init(l2x0_base, aux_val, aux_mask); + __l2c_init(data, aux_val, aux_mask, cache_id); return 0; } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 137463bcbeac..b05e08c4734c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1964,8 +1964,8 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) mapping->nr_bitmaps = 1; mapping->extensions = extensions; mapping->base = base; - mapping->size = bitmap_size << PAGE_SHIFT; mapping->bits = BITS_PER_BYTE * bitmap_size; + mapping->size = mapping->bits << PAGE_SHIFT; spin_lock_init(&mapping->lock); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c8ab21dc2178..5958ac05181e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -23,6 +23,7 @@ #include <linux/dma-contiguous.h> #include <linux/sizes.h> +#include <asm/cp15.h> #include <asm/mach-types.h> #include <asm/memblock.h> #include <asm/prom.h> @@ -36,6 +37,14 @@ #include "mm.h" +#ifdef CONFIG_CPU_CP15_MMU +unsigned long __init __clear_cr(unsigned long mask) +{ + cr_alignment = cr_alignment & ~mask; + return cr_alignment; +} +#endif + static phys_addr_t phys_initrd_start __initdata = 0; static unsigned long phys_initrd_size __initdata = 0; diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c new file mode 100644 index 000000000000..10a3cf28c362 --- /dev/null +++ b/arch/arm/mm/l2c-common.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/bug.h> +#include <linux/smp.h> +#include <asm/outercache.h> + +void outer_disable(void) +{ + WARN_ON(!irqs_disabled()); + WARN_ON(num_online_cpus() > 1); + + if (outer_cache.disable) + outer_cache.disable(); +} diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S new file mode 100644 index 000000000000..99b05f21a59a --- /dev/null +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -0,0 +1,58 @@ +/* + * L2C-310 early resume code. This can be used by platforms to restore + * the settings of their L2 cache controller before restoring the + * processor state. + * + * This code can only be used to if you are running in the secure world. + */ +#include <linux/linkage.h> +#include <asm/hardware/cache-l2x0.h> + + .text + +ENTRY(l2c310_early_resume) + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} + @ r1 = phys address of L2C-310 controller + @ r2 = aux_ctrl + @ r3 = tag_latency + @ r4 = data_latency + @ r5 = filter_start + @ r6 = filter_end + @ r7 = prefetch_ctrl + @ r8 = pwr_ctrl + + @ Check that the address has been initialised + teq r1, #0 + moveq pc, lr + + @ The prefetch and power control registers are revision dependent + @ and can be written whether or not the L2 cache is enabled + ldr r0, [r1, #L2X0_CACHE_ID] + and r0, r0, #L2X0_CACHE_ID_RTL_MASK + cmp r0, #L310_CACHE_ID_RTL_R2P0 + strcs r7, [r1, #L310_PREFETCH_CTRL] + cmp r0, #L310_CACHE_ID_RTL_R3P0 + strcs r8, [r1, #L310_POWER_CTRL] + + @ Don't setup the L2 cache if it is already enabled + ldr r0, [r1, #L2X0_CTRL] + tst r0, #L2X0_CTRL_EN + movne pc, lr + + str r3, [r1, #L310_TAG_LATENCY_CTRL] + str r4, [r1, #L310_DATA_LATENCY_CTRL] + str r6, [r1, #L310_ADDR_FILTER_END] + str r5, [r1, #L310_ADDR_FILTER_START] + + str r2, [r1, #L2X0_AUX_CTRL] + mov r9, #L2X0_CTRL_EN + str r9, [r1, #L2X0_CTRL] + mov pc, lr +ENDPROC(l2c310_early_resume) + + .align +1: .long l2x0_saved_regs - . diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 7ea641b7aa7d..ce727d47275c 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -2,6 +2,8 @@ #include <linux/list.h> #include <linux/vmalloc.h> +#include <asm/pgtable.h> + /* the upper-most page table pointer */ extern pmd_t *top_pmd; @@ -93,3 +95,5 @@ extern phys_addr_t arm_lowmem_limit; void __init bootmem_init(void); void arm_mm_memblock_reserve(void); void dma_contiguous_remap(void); + +unsigned long __clear_cr(unsigned long mask); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 82ea2b3fb9b5..ab14b79b03f0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -118,28 +118,54 @@ static struct cachepolicy cache_policies[] __initdata = { }; #ifdef CONFIG_CPU_CP15 +static unsigned long initial_pmd_value __initdata = 0; + /* - * These are useful for identifying cache coherency - * problems by allowing the cache or the cache and - * writebuffer to be turned off. (Note: the write - * buffer should not be on and the cache off). + * Initialise the cache_policy variable with the initial state specified + * via the "pmd" value. This is used to ensure that on ARMv6 and later, + * the C code sets the page tables up with the same policy as the head + * assembly code, which avoids an illegal state where the TLBs can get + * confused. See comments in early_cachepolicy() for more information. */ -static int __init early_cachepolicy(char *p) +void __init init_default_cache_policy(unsigned long pmd) { int i; + initial_pmd_value = pmd; + + pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE; + + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) + if (cache_policies[i].pmd == pmd) { + cachepolicy = i; + break; + } + + if (i == ARRAY_SIZE(cache_policies)) + pr_err("ERROR: could not find cache policy\n"); +} + +/* + * These are useful for identifying cache coherency problems by allowing + * the cache or the cache and writebuffer to be turned off. (Note: the + * write buffer should not be on and the cache off). + */ +static int __init early_cachepolicy(char *p) +{ + int i, selected = -1; + for (i = 0; i < ARRAY_SIZE(cache_policies); i++) { int len = strlen(cache_policies[i].policy); if (memcmp(p, cache_policies[i].policy, len) == 0) { - cachepolicy = i; - cr_alignment &= ~cache_policies[i].cr_mask; - cr_no_alignment &= ~cache_policies[i].cr_mask; + selected = i; break; } } - if (i == ARRAY_SIZE(cache_policies)) - printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + + if (selected == -1) + pr_err("ERROR: unknown or unsupported cache policy\n"); + /* * This restriction is partly to do with the way we boot; it is * unpredictable to have memory mapped using two different sets of @@ -147,12 +173,18 @@ static int __init early_cachepolicy(char *p) * change these attributes once the initial assembly has setup the * page tables. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6) { - printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); - cachepolicy = CPOLICY_WRITEBACK; + if (cpu_architecture() >= CPU_ARCH_ARMv6 && selected != cachepolicy) { + pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n", + cache_policies[cachepolicy].policy); + return 0; + } + + if (selected != cachepolicy) { + unsigned long cr = __clear_cr(cache_policies[selected].cr_mask); + cachepolicy = selected; + flush_cache_all(); + set_cr(cr); } - flush_cache_all(); - set_cr(cr_alignment); return 0; } early_param("cachepolicy", early_cachepolicy); @@ -187,35 +219,6 @@ static int __init early_ecc(char *p) early_param("ecc", early_ecc); #endif -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} -__setup("noalign", noalign_setup); - -#ifndef CONFIG_SMP -void adjust_cr(unsigned long mask, unsigned long set) -{ - unsigned long flags; - - mask &= ~CR_A; - - set &= mask; - - local_irq_save(flags); - - cr_no_alignment = (cr_no_alignment & ~mask) | set; - cr_alignment = (cr_alignment & ~mask) | set; - - set_cr((get_cr() & ~mask) | set); - - local_irq_restore(flags); -} -#endif - #else /* ifdef CONFIG_CPU_CP15 */ static int __init early_cachepolicy(char *p) @@ -415,8 +418,17 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } - if (is_smp()) - cachepolicy = CPOLICY_WRITEALLOC; + + if (is_smp()) { + if (cachepolicy != CPOLICY_WRITEALLOC) { + pr_warn("Forcing write-allocate cache policy for SMP\n"); + cachepolicy = CPOLICY_WRITEALLOC; + } + if (!(initial_pmd_value & PMD_SECT_S)) { + pr_warn("Forcing shared mappings for SMP\n"); + initial_pmd_value |= PMD_SECT_S; + } + } /* * Strip out features not present on earlier architectures. @@ -540,11 +552,12 @@ static void __init build_mem_type_table(void) mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; #endif - if (is_smp()) { - /* - * Mark memory with the "shared" attribute - * for SMP systems - */ + /* + * If the initial page tables were created with the S bit + * set, then we need to do the same here for the same + * reasons given in early_cachepolicy(). + */ + if (initial_pmd_value & PMD_SECT_S) { user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 0c93588fcb91..1ca37c72f12f 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -123,6 +123,11 @@ __v7m_setup: mov pc, lr ENDPROC(__v7m_setup) + .align 2 +__v7m_setup_stack: + .space 4 * 8 @ 8 registers +__v7m_setup_stack_top: + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" @@ -152,6 +157,3 @@ __v7m_proc_info: .long nop_cache_fns @ proc_info_list.cache .size __v7m_proc_info, . - __v7m_proc_info -__v7m_setup_stack: - .space 4 * 8 @ 8 registers -__v7m_setup_stack_top: diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index c5001659bdf8..25c68ceb9e2b 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -22,7 +22,6 @@ */ #include <linux/linkage.h> -#include <asm/asm-offsets.h> .data .align diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 6cac43bd1d86..423f56dd4028 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -866,6 +866,8 @@ vfp_double_multiply_accumulate(int dd, int dn, int dm, u32 fpscr, u32 negate, ch vdp.sign = vfp_sign_negate(vdp.sign); vfp_double_unpack(&vdn, vfp_get_double(dd)); + if (vdn.exponent == 0 && vdn.significand) + vfp_double_normalise_denormal(&vdn); if (negate & NEG_SUBTRACT) vdn.sign = vfp_sign_negate(vdn.sign); diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index b252631b406b..4f96c1617aae 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -915,6 +915,8 @@ vfp_single_multiply_accumulate(int sd, int sn, s32 m, u32 fpscr, u32 negate, cha v = vfp_get_float(sd); pr_debug("VFP: s%u = %08x\n", sd, v); vfp_single_unpack(&vsn, v); + if (vsn.exponent == 0 && vsn.significand) + vfp_single_normalise_denormal(&vsn); if (negate & NEG_SUBTRACT) vsn.sign = vfp_sign_negate(vsn.sign); |
