diff options
Diffstat (limited to 'arch/arm')
21 files changed, 647 insertions, 167 deletions
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 1d0e8926a2f0..6d8a0c891f80 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -699,6 +699,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +CONFIG_SERIO_AMS_DELTA=y # CONFIG_GAMEPORT is not set # diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index d6ad92177324..1efb833147c2 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -264,7 +264,7 @@ CONFIG_MACH_OMAP_GENERIC=y # OMAP Core Type # CONFIG_ARCH_OMAP2420=y -# CONFIG_ARCH_OMAP2430 is not set +CONFIG_ARCH_OMAP2430=y CONFIG_ARCH_OMAP3430=y CONFIG_OMAP_PACKAGE_CBB=y CONFIG_OMAP_PACKAGE_CUS=y @@ -276,8 +276,9 @@ CONFIG_OMAP_PACKAGE_CBP=y CONFIG_MACH_OMAP2_TUSB6010=y CONFIG_MACH_OMAP_H4=y CONFIG_MACH_OMAP_APOLLON=y -# CONFIG_MACH_OMAP_2430SDP is not set +CONFIG_MACH_OMAP_2430SDP=y CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_DEVKIT8000=y CONFIG_MACH_OMAP_LDP=y CONFIG_MACH_OVERO=y CONFIG_MACH_OMAP3EVM=y @@ -390,7 +391,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -443,7 +444,7 @@ CONFIG_BINFMT_MISC=y # CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y +# CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y @@ -1262,7 +1263,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers @@ -1291,9 +1292,9 @@ CONFIG_MFD_CORE=y # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set -# CONFIG_MENELAUS is not set +CONFIG_MENELAUS=y CONFIG_TWL4030_CORE=y -# CONFIG_TWL4030_POWER is not set +CONFIG_TWL4030_POWER=y CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set @@ -1312,7 +1313,7 @@ CONFIG_TWL4030_CODEC=y # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set @@ -1320,8 +1321,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y # CONFIG_MEDIA_SUPPORT is not set # @@ -1358,16 +1359,8 @@ CONFIG_FB_TILEBLITTING=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP is not set CONFIG_FB_OMAP_LCD_VGA=y -# CONFIG_FB_OMAP_031M3R is not set -# CONFIG_FB_OMAP_048M3R is not set -CONFIG_FB_OMAP_079M3R=y -# CONFIG_FB_OMAP_092M9R is not set -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set -# CONFIG_FB_OMAP_LCD_MIPID is not set -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 # CONFIG_OMAP2_DSS is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y @@ -1686,7 +1679,7 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set @@ -1751,6 +1744,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set +CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27f489747bbd..b18d7c28ab7a 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -152,6 +152,16 @@ config MACH_AMS_DELTA Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. +config AMS_DELTA_FIQ + bool "Fast Interrupt Request (FIQ) support for the E3" + depends on MACH_AMS_DELTA + select FIQ + help + Provide a FIQ handler for the E3. + This allows for fast handling of interrupts generated + by the clock line of the E3 mailboard (or a PS/2 keyboard) + connected to the GPIO based external keyboard port. + config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index b6a537c875b8..ea231c7a550a 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o +obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o obj-$(CONFIG_MACH_HERALD) += board-htcherald.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S new file mode 100644 index 000000000000..927d5a181760 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -0,0 +1,278 @@ +/* + * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S + * + * Based on linux/arch/arm/lib/floppydma.S + * Renamed and modified to work with 2.6 kernel by Matt Callow + * Copyright (C) 1995, 1996 Russell King + * Copyright (C) 2004 Pete Trapps + * Copyright (C) 2006 Matt Callow + * Copyright (C) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +#include <plat/io.h> +#include <plat/board-ams-delta.h> + +#include <mach/ams-delta-fiq.h> + +/* + * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. + * Unfortunately, those were not placed in a separate header file. + */ +#define OMAP1510_GPIO_BASE 0xFFFCE000 +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +/* GPIO register bitmasks */ +#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) +#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK) +#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ) +#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH) +#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) + +/* IRQ handler register bitmasks */ +#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) +#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) + +/* Driver buffer byte offsets */ +#define BUF_MASK (FIQ_MASK * 4) +#define BUF_STATE (FIQ_STATE * 4) +#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4) +#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4) +#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4) +#define BUF_BUF_LEN (FIQ_BUF_LEN * 4) +#define BUF_KEY (FIQ_KEY * 4) +#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4) +#define BUF_BUFFER_START (FIQ_BUFFER_START * 4) +#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4) +#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4) +#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4) +#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4) +#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4) +#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4) +#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4) +#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4) +#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4) +#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4) +#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4) +#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4) +#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4) +#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4) +#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4) +#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4) +#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4) +#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4) +#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4) +#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4) +#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4) +#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4) + + +/* + * Register useage + * r8 - temporary + * r9 - the driver buffer + * r10 - temporary + * r11 - interrupts mask + * r12 - base pointers + * r13 - interrupts status + */ + + .text + + .global qwerty_fiqin_end + +ENTRY(qwerty_fiqin_start) + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ FIQ intrrupt handler + ldr r12, omap_ih1_base @ set pointer to level1 handler + + ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask + + ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status + bics r13, r13, r11 @ clear masked - any left? + beq exit @ none - spurious FIQ? exit + + ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number + + mov r8, #2 @ reset FIQ agreement + str r8, [r12, #IRQ_CONTROL_REG_OFFSET] + + cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + beq gpio @ yes - process it + + mov r8, #1 + orr r8, r11, r8, lsl r10 @ mask spurious interrupt + str r8, [r12, #IRQ_MIR_REG_OFFSET] +exit: + subs pc, lr, #4 @ return from FIQ + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + + + @@@@@@@@@@@@@@@@@@@@@@@@@@@ +gpio: @ GPIO bank interrupt handler + ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank + + ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask +restart: + ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits + bics r13, r13, r11 @ clear masked - any left? + beq exit @ no - spurious interrupt? exit + + orr r11, r11, r13 @ mask all requested interrupts + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? + beq hksw @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@ + @ Keyboard clock FIQ mode interrupt handler + @ r10 now contains KEYBRD_CLK_MASK, use it + str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt + bic r11, r11, r10 @ unmask it + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + @ Process keyboard data + ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input + + ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state + cmp r10, #0 @ are we expecting start bit? + bne data @ no - go to data processing + + ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? + beq hksw @ no - try next source + + @ r8 contains KEYBRD_DATA_MASK, use it + str r8, [r9, #BUF_STATE] @ enter data processing state + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_KEY] @ clear keycode + mov r10, #2 @ reset input bit mask + str r10, [r9, #BUF_MASK] + + @ Mask other GPIO line interrupts till key done + str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore + mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register + + b restart @ restart + +data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask + + @ r8 still contains GPIO input bits + ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? + ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far, + orreq r8, r8, r10 @ set 1 at current mask position + streq r8, [r9, #BUF_KEY] @ and save back + + mov r10, r10, lsl #1 @ shift mask left + bics r10, r10, #0x800 @ have we got all the bits? + strne r10, [r9, #BUF_MASK] @ not yet - store the mask + bne restart @ and restart + + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_STATE] @ reset state to start + + @ Key done - restore interrupt mask + ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask + and r11, r11, r10 @ unmask all saved as unmasked + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register + + @ Try appending the keycode to the circular buffer + ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count + ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size + cmp r10, r8 @ is buffer full? + beq hksw @ yes - key lost, next source + + add r10, r10, #1 @ incremet keystrokes counter + str r10, [r9, #BUF_KEYS_CNT] + + ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset + @ r8 already contains buffer size + cmp r10, r8 @ end of buffer? + moveq r10, #0 @ yes - rewind to buffer start + + ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address + add r12, r12, r10, LSL #2 @ calculate buffer tail address + ldr r8, [r9, #BUF_KEY] @ get last keycode + str r8, [r12] @ append it to the buffer tail + + add r10, r10, #1 @ increment buffer tail offset + str r10, [r9, #BUF_TAIL_OFFSET] + + ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_KEY] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +hksw: @Is hook switch interrupt requested? + tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? + beq mdm @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Hook switch interrupt FIQ mode simple handler + + @ Don't toggle active edge, the switch always bounces + + @ Increment hook switch interrupt counter + ldr r10, [r9, #BUF_CNT_INT_HSW] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_HSW] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +mdm: @Is it a modem interrupt? + tst r13, #MODEM_IRQ_MASK @ is modem status bit set? + beq irq @ no - check for next interrupt + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Modem FIQ mode interrupt handler stub + + @ Increment modem interrupt counter + ldr r10, [r9, #BUF_CNT_INT_MDM] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_MDM] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +irq: @ Place deferred_fiq interrupt request + ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler + mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit + str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register + + ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank + b restart @ check for next GPIO interrupt + @@@@@@@@@@@@@@@@@@@@@@@@@@@ + + +/* + * Virtual addresses for IO + */ +omap_ih1_base: + .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE) +deferred_fiq_ih_base: + .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE) +omap1510_gpio_base: + .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE) +qwerty_fiqin_end: + +/* + * Check the size of the FIQ, + * it cannot go beyond 0xffff0200, and is copied to 0xffff001c + */ +.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c) + .err +.endif diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c new file mode 100644 index 000000000000..6c994e2d8879 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -0,0 +1,155 @@ +/* + * Amstrad E3 FIQ handling + * + * Copyright (C) 2009 Janusz Krzysztofik + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2004 Amstrad Plc + * Copyright (C) 2001 RidgeRun, Inc. + * + * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c + * in the MontaVista 2.4 kernel (and the Amstrad changes therein) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/io.h> + +#include <plat/board-ams-delta.h> + +#include <asm/fiq.h> +#include <mach/ams-delta-fiq.h> + +static struct fiq_handler fh = { + .name = "ams-delta-fiq" +}; + +/* + * This buffer is shared between FIQ and IRQ contexts. + * The FIQ and IRQ isrs can both read and write it. + * It is structured as a header section several 32bit slots, + * followed by the circular buffer where the FIQ isr stores + * keystrokes received from the qwerty keyboard. + * See ams-delta-fiq.h for details of offsets. + */ +unsigned int fiq_buffer[1024]; +EXPORT_SYMBOL(fiq_buffer); + +static unsigned int irq_counter[16]; + +static irqreturn_t deferred_fiq(int irq, void *dev_id) +{ + struct irq_desc *irq_desc; + struct irq_chip *irq_chip = NULL; + int gpio, irq_num, fiq_count; + + irq_desc = irq_to_desc(IH_GPIO_BASE); + if (irq_desc) + irq_chip = irq_desc->chip; + + /* + * For each handled GPIO interrupt, keep calling its interrupt handler + * until the IRQ counter catches the FIQ incremented interrupt counter. + */ + for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; + gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { + irq_num = gpio_to_irq(gpio); + fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; + + while (irq_counter[gpio] < fiq_count) { + if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { + /* + * It looks like handle_edge_irq() that + * OMAP GPIO edge interrupts default to, + * expects interrupt already unmasked. + */ + if (irq_chip && irq_chip->unmask) + irq_chip->unmask(irq_num); + } + generic_handle_irq(irq_num); + + irq_counter[gpio]++; + } + } + return IRQ_HANDLED; +} + +void __init ams_delta_init_fiq(void) +{ + void *fiqhandler_start; + unsigned int fiqhandler_length; + struct pt_regs FIQ_regs; + unsigned long val, offset; + int i, retval; + + fiqhandler_start = &qwerty_fiqin_start; + fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; + pr_info("Installing fiq handler from %p, length 0x%x\n", + fiqhandler_start, fiqhandler_length); + + retval = claim_fiq(&fh); + if (retval) { + pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", + retval); + return; + } + + retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, + IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); + if (retval < 0) { + pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); + release_fiq(&fh); + return; + } + /* + * Since no set_type() method is provided by OMAP irq chip, + * switch to edge triggered interrupt type manually. + */ + offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); + omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); + + set_fiq_handler(fiqhandler_start, fiqhandler_length); + + /* + * Initialise the buffer which is shared + * between FIQ mode and IRQ mode + */ + fiq_buffer[FIQ_GPIO_INT_MASK] = 0; + fiq_buffer[FIQ_MASK] = 0; + fiq_buffer[FIQ_STATE] = 0; + fiq_buffer[FIQ_KEY] = 0; + fiq_buffer[FIQ_KEYS_CNT] = 0; + fiq_buffer[FIQ_KEYS_HICNT] = 0; + fiq_buffer[FIQ_TAIL_OFFSET] = 0; + fiq_buffer[FIQ_HEAD_OFFSET] = 0; + fiq_buffer[FIQ_BUF_LEN] = 256; + fiq_buffer[FIQ_MISSED_KEYS] = 0; + fiq_buffer[FIQ_BUFFER_START] = + (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF]; + + for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++) + fiq_buffer[i] = 0; + + /* + * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr + * will run in an unpredictable context. The fiq_buffer is the FIQ isr's + * only means of communication with the IRQ level and other kernel + * context code. + */ + FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer; + set_fiq_regs(&FIQ_regs); + + pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer); + + /* + * Redirect GPIO interrupts to FIQ + */ + offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + val = omap_readl(OMAP_IH1_BASE + offset) | 1; + omap_writel(val, OMAP_IH1_BASE + offset); +} diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 7fc11c34b696..fdd1dd53fa9c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -33,6 +33,8 @@ #include <plat/board.h> #include <plat/common.h> +#include <mach/ams-delta-fiq.h> + static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; @@ -236,6 +238,10 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); +#ifdef CONFIG_AMS_DELTA_FIQ + ams_delta_init_fiq(); +#endif + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } @@ -263,8 +269,18 @@ static struct platform_device ams_delta_modem_device = { static int __init ams_delta_modem_init(void) { + int err; + omap_cfg_reg(M14_1510_GPIO2); - ams_delta_modem_ports[0].irq = gpio_to_irq(2); + ams_delta_modem_ports[0].irq = + gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + + err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem"); + if (err) { + pr_err("Couldn't request gpio pin for modem\n"); + return err; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); ams_delta_latch2_write( AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h new file mode 100644 index 000000000000..7a2df29400ca --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -0,0 +1,79 @@ +/* + * arch/arm/mach-omap1/include/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __AMS_DELTA_FIQ_H +#define __AMS_DELTA_FIQ_H + +#include <plat/irqs.h> + +/* + * Interrupt number used for passing control from FIQ to IRQ. + * IRQ12, described as reserved, has been selected. + */ +#define INT_DEFERRED_FIQ INT_1510_RES12 +/* + * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. + */ +#if (INT_DEFERRED_FIQ < IH2_BASE) +#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE +#else +#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE +#endif + +/* + * These are the offsets from the begining of the fiq_buffer. They are put here + * since the buffer and header need to be accessed by drivers servicing devices + * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. + */ +#define FIQ_MASK 0 +#define FIQ_STATE 1 +#define FIQ_KEYS_CNT 2 +#define FIQ_TAIL_OFFSET 3 +#define FIQ_HEAD_OFFSET 4 +#define FIQ_BUF_LEN 5 +#define FIQ_KEY 6 +#define FIQ_MISSED_KEYS 7 +#define FIQ_BUFFER_START 8 +#define FIQ_GPIO_INT_MASK 9 +#define FIQ_KEYS_HICNT 10 +#define FIQ_IRQ_PEND 11 +#define FIQ_SIR_CODE_L1 12 +#define IRQ_SIR_CODE_L2 13 + +#define FIQ_CNT_INT_00 14 +#define FIQ_CNT_INT_KEY 15 +#define FIQ_CNT_INT_MDM 16 +#define FIQ_CNT_INT_03 17 +#define FIQ_CNT_INT_HSW 18 +#define FIQ_CNT_INT_05 19 +#define FIQ_CNT_INT_06 20 +#define FIQ_CNT_INT_07 21 +#define FIQ_CNT_INT_08 22 +#define FIQ_CNT_INT_09 23 +#define FIQ_CNT_INT_10 24 +#define FIQ_CNT_INT_11 25 +#define FIQ_CNT_INT_12 26 +#define FIQ_CNT_INT_13 27 +#define FIQ_CNT_INT_14 28 +#define FIQ_CNT_INT_15 29 + +#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ + +#ifndef __ASSEMBLER__ +extern unsigned int fiq_buffer[]; +extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; + +extern void __init ams_delta_init_fiq(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index b6d9584544b4..e8a8cf36b7f0 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> .pushsection .data @@ -37,23 +39,12 @@ omap_uart_virt: .word 0x0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check 7XX UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] - cmp \rx, #0 @ anything in 7XX scratchpad? - bne 10f @ found 7XX uart - - /* Check 15xx/16xx UART1 scratchpad register for uart to use */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rx, #0 @ no port configured? diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 2de4f79f03a0..e679a2cc86c3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/mcspi.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index e15d2e87cfc1..1d7f827b0408 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -82,7 +82,7 @@ static inline void __init zoom_init_smsc911x(void) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = 0x10000000, + .mapbase = ZOOM_UART_BASE, .irq = OMAP_GPIO_IRQ(102), .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 9a26f84b1141..803ef14cbf2d 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -91,8 +91,8 @@ static void __init omap_zoom2_map_io(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index cd3e40cf3ac1..33147042485f 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -73,8 +73,8 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom_map_io, .init_irq = omap_zoom_init_irq, diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4a63a2ea484d..35b24409a0c8 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) @@ -40,13 +42,12 @@ omap_uart_lsr: .word 0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xfa000000 @ virtual base - orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rx, #0 @ no port configured? @@ -87,10 +88,10 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: mov \rx, #ZOOM_UART_BASE +95: ldr \rx, =ZOOM_UART_BASE ldr \tmp, =omap_uart_phys str \rx, [\tmp, #0] - mov \rx, #ZOOM_UART_VIRT + ldr \rx, =ZOOM_UART_VIRT ldr \tmp, =omap_uart_virt str \rx, [\tmp, #0] mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 87f676acf61d..3cfb425ea67e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -166,6 +166,15 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, +#if defined(CONFIG_DEBUG_LL) && \ + (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) + { + .virtual = ZOOM_UART_VIRT, + .pfn = __phys_to_pfn(ZOOM_UART_BASE), + .length = SZ_1M, + .type = MT_DEVICE + }, +#endif }; #endif #ifdef CONFIG_ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 07aa7b3c95f7..2ff4dce95ee8 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -1901,26 +1901,15 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), - _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), - _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), - _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), - _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), - _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), - _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), - _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), - _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), - _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), - _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), @@ -1928,10 +1917,7 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), - _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), - _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), - _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), @@ -1948,8 +1934,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), - _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), - _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), @@ -1958,11 +1942,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), - _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), - _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), - _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), - _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), - _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), @@ -2010,77 +1989,12 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), - _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), - _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), - _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), - _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), - _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), - _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), - _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), - _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), - _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), - _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), - _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), - _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), - _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), - _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), - _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), - _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), - _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), - _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), - _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), - _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), - _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), - _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), - _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), - _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), - _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), - _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), - _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), - _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), - _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), - _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), - _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), - _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), - _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), - _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), - _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), - _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), - _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), - _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), - _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), - _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), - _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), - _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), - _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), - _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), - _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), - _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), - _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), - _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), - _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), - _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), - _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), - _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), - _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), - _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), - _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), - _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), - _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), - _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), - _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), - _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), - _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), - _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), - _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), - _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), - _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 401701977dbb..c01d9f08a198 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,4 +428,8 @@ void omap3_intc_resume_idle(void); #include <mach/hardware.h> +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + #endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index f235d32cd942..ffd909fa5287 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -61,9 +61,9 @@ # define OMAP_NAME omap16xx # endif #endif -#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) +#ifdef CONFIG_ARCH_OMAP2PLUS # if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" +# error "OMAP1 and OMAP2PLUS can't be selected at the same time" # endif #endif #ifdef CONFIG_ARCH_OMAP2420 @@ -82,12 +82,20 @@ # define OMAP_NAME omap2430 # endif #endif -#ifdef CONFIG_ARCH_OMAP3430 +#ifdef CONFIG_ARCH_OMAP3 # ifdef OMAP_NAME # undef MULTI_OMAP2 # define MULTI_OMAP2 # else -# define OMAP_NAME omap3430 +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 # endif #endif diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 83dce4c4f7e6..19145f5c32ba 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -15,6 +15,20 @@ #include <linux/init.h> +/* + * Memory entry used for the DEBUG_LL UART configuration. See also + * uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc) + /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 #define OMAP1_UART2_BASE 0xfffb0800 @@ -39,7 +53,7 @@ /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfb000000 +#define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 #define OMAP7XX_PORT_SHIFT 0 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 81d9ec540fcf..bbedd71943f6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -20,27 +20,21 @@ #include <linux/types.h> #include <linux/serial_reg.h> +#include <asm/memory.h> #include <asm/mach-types.h> #include <plat/serial.h> -static volatile u8 *uart1_base; -static int uart1_shift; - static volatile u8 *uart_base; static int uart_shift; /* - * Store the DEBUG_LL uart number into UART1 scratchpad register. + * Store the DEBUG_LL uart number into memory. * See also debug-macro.S, and serial.c for related code. - * - * Please note that we currently assume that: - * - UART1 clocks are enabled for register access - * - UART1 scratchpad register can be used */ -static void set_uart1_scratchpad(unsigned char port) +static void set_omap_uart_info(unsigned char port) { - uart1_base[UART_SCR << uart1_shift] = port; + *(volatile u32 *)OMAP_UART_INFO = port; } static void putc(int c) @@ -60,42 +54,38 @@ static inline void flush(void) /* * Macros to configure UART1 and debug UART */ -#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \ - dbg_uart, dbg_shft, dbg_id) \ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ if (machine_is_##mach()) { \ - uart1_base = (volatile u8 *)(uart1_phys); \ - uart1_shift = (uart1_shft); \ uart_base = (volatile u8 *)(dbg_uart); \ uart_shift = (dbg_shft); \ port = (dbg_id); \ - set_uart1_scratchpad(port); \ + set_omap_uart_info(port); \ break; \ } #define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p) + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) #define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p) + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) #define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p) + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) /* Zoom2/3 shift is different for UART1 and external port */ #define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) static inline void __arch_decomp_setup(unsigned long arch_id) { diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 51f4dfb82e2b..226b2e858d6c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -437,6 +437,20 @@ static inline int omap34xx_sram_init(void) } #endif +#ifdef CONFIG_ARCH_OMAP4 +int __init omap44xx_sram_init(void) +{ + printk(KERN_ERR "FIXME: %s not implemented\n", __func__); + + return -ENODEV; +} +#else +static inline int omap44xx_sram_init(void) +{ + return 0; +} +#endif + int __init omap_sram_init(void) { omap_detect_sram(); @@ -451,7 +465,7 @@ int __init omap_sram_init(void) else if (cpu_is_omap34xx()) omap34xx_sram_init(); else if (cpu_is_omap44xx()) - omap34xx_sram_init(); /* FIXME: */ + omap44xx_sram_init(); return 0; } |
