diff options
Diffstat (limited to 'arch/arm/mach-exynos4/mach-armlex4210.c')
| -rw-r--r-- | arch/arm/mach-exynos4/mach-armlex4210.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c new file mode 100644 index 000000000000..b482c6285fc4 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-armlex4210.c @@ -0,0 +1,215 @@ +/* linux/arch/arm/mach-exynos4/mach-armlex4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/smsc911x.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-serial.h> +#include <plat/regs-srom.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPX2(5), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static void __init armlex4210_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata); + s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata); +} + +static void __init armlex4210_wlan_init(void) +{ + /* enable */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP); + + /* reset */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP); + + /* wakeup */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP); +} + +static struct resource armlex4210_smsc911x_resources[] = { + [0] = { + .start = EXYNOS4_PA_SROM_BANK(3), + .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(27), + .end = IRQ_EINT(27), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device armlex4210_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources), + .resource = armlex4210_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct platform_device *armlex4210_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_rtc, + &s3c_device_wdt, + &exynos4_device_sysmmu, + &samsung_asoc_dma, + &armlex4210_smsc911x, + &exynos4_device_ahci, +}; + +static void __init armlex4210_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (0 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__ADDRMODE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); +} + +static void __init armlex4210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(armlex4210_uartcfgs, + ARRAY_SIZE(armlex4210_uartcfgs)); +} + +static void __init armlex4210_machine_init(void) +{ + armlex4210_smsc911x_init(); + + armlex4210_sdhci_init(); + + armlex4210_wlan_init(); + + platform_add_devices(armlex4210_devices, + ARRAY_SIZE(armlex4210_devices)); +} + +MACHINE_START(ARMLEX4210, "ARMLEX4210") + /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = armlex4210_map_io, + .init_machine = armlex4210_machine_init, + .timer = &exynos4_timer, +MACHINE_END |
