diff options
Diffstat (limited to 'arch/arm/boot')
26 files changed, 226 insertions, 71 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 45a6b9b7af2a..6a4e7341ecd3 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -117,11 +117,9 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ - perl -e 'while (<>) { \ - $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \ - $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \ - }; printf "%d\n", $$bss_end - $$bss_start;') +KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ + sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \ + -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) ) LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 45c8823c3750..517e0e18f0b8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -29,19 +29,19 @@ #if defined(CONFIG_DEBUG_ICEDCC) #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm #elif defined(CONFIG_CPU_XSCALE) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c8, c0, 0 .endm #else - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c1, c0, 0 @@ -57,7 +57,7 @@ .endm #if defined(CONFIG_ARCH_SA1100) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 mov \rb, #0x80000000 @ physical base address #ifdef CONFIG_DEBUG_LL_SER3 add \rb, \rb, #0x00050000 @ Ser3 @@ -66,8 +66,8 @@ #endif .endm #else - .macro loadsp, rb, tmp - addruart \rb, \tmp + .macro loadsp, rb, tmp1, tmp2 + addruart \rb, \tmp1, \tmp2 .endm #endif #endif @@ -561,8 +561,6 @@ not_relocated: mov r0, #0 bl decompress_kernel bl cache_clean_flush bl cache_off - mov r1, r7 @ restore architecture number - mov r2, r8 @ restore atags pointer #ifdef CONFIG_ARM_VIRT_EXT mrs r0, spsr @ Get saved CPU boot mode @@ -1297,7 +1295,7 @@ phex: adr r3, phexbuf b 1b @ puts corrupts {r0, r1, r2, r3} -puts: loadsp r3, r1 +puts: loadsp r3, r2, r1 1: ldrb r2, [r0], #1 teq r2, #0 moveq pc, lr @@ -1314,8 +1312,8 @@ puts: loadsp r3, r1 @ putc corrupts {r0, r1, r2, r3} putc: mov r2, r0 + loadsp r3, r1, r0 mov r0, #0 - loadsp r3, r1 b 2b @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr} @@ -1365,6 +1363,8 @@ __hyp_reentry_vectors: __enter_kernel: mov r0, #0 @ must be 0 + mov r1, r7 @ restore architecture number + mov r2, r8 @ restore atags pointer ARM( mov pc, r4 ) @ call kernel M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class THUMB( bx r4 ) @ entry point is always ARM for A/R classes diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 4cc09e43eea2..6916d7532ad2 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -163,7 +163,7 @@ }; uart0: serial@12000 { - compatible = "snps,dw-apb-uart"; + compatible = "marvell,armada-38x-uart"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -173,7 +173,7 @@ }; uart1: serial@12100 { - compatible = "snps,dw-apb-uart"; + compatible = "marvell,armada-38x-uart"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 699fdf94d139..9fe4f5a6379e 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -69,7 +69,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index a1f4d6d5a569..0edf769ea95c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -21,8 +21,8 @@ stdout-path = "serial2:115200n8"; }; - memory { - device_type = "memory"; + memory@c0000000 { + /* 128 MB DDR2 SDRAM @ 0xc0000000 */ reg = <0xc0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index c66cf7895363..12010002dbdb 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -7,10 +7,19 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x0>; + }; + arm { #address-cells = <1>; #size-cells = <1>; @@ -46,8 +55,6 @@ pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index d6657b3bae84..85d7b5148b0a 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8148 EVM"; - compatible = "ti,dm8148-evm", "ti,dm8148"; + compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 63883b3479f9..6418f9cdbe83 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -9,7 +9,7 @@ / { model = "HP t410 Smart Zero Client"; - compatible = "hp,t410", "ti,dm8148"; + compatible = "hp,t410", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index c72a2132aa82..1d030d567307 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8168 EVM"; - compatible = "ti,dm8168-evm", "ti,dm8168"; + compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index fee0547f7302..31b824ad5d29 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -10,7 +10,7 @@ / { model = "DRA62x J5 Eco EVM"; - compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; + compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 0c99ac04ad08..6464f2560e06 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -523,7 +523,7 @@ }; touchscreen@20 { - compatible = "syna,rmi4_i2c"; + compatible = "syna,rmi4-i2c"; reg = <0x20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; @@ -541,8 +541,8 @@ rmi4-f11@11 { reg = <0x11>; - touch-inverted-y; - touch-swapped-x-y; + touchscreen-inverted-y; + touchscreen-swapped-x-y; syna,sensor-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 4d42335c0dee..ce85b3ca1a55 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -868,6 +868,7 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; + fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b47cac23a04b..6fa7bba3e801 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -26,7 +26,7 @@ gpio = <&gpio1 3 0>; /* gpio_3 */ startup-delay-us = <70000>; enable-active-high; - vin-supply = <&vmmc2>; + vin-supply = <&vaux3>; }; /* HS USB Host PHY on PORT 1 */ @@ -82,6 +82,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { + ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; }; }; }; @@ -199,6 +200,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; }; }; @@ -213,7 +215,7 @@ }; wl127x_gpio: pinmux_wl127x_gpio_pin { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; @@ -260,6 +262,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &twl { twl_power: power { compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 063fdb65dc60..f07f9018c3e7 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -379,7 +379,7 @@ port@0 { reg = <0>; adv7511_in: endpoint { - remote-endpoint = <&du_out_lvds0>; + remote-endpoint = <&lvds0_out>; }; }; @@ -467,10 +467,8 @@ status = "okay"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -478,12 +476,26 @@ remote-endpoint = <&adv7123_in>; }; }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { port@1 { endpoint { remote-endpoint = <&adv7511_in>; }; }; - port@2 { + }; +}; + +&lvds1 { + status = "okay"; + + ports { + port@1 { lvds_connector: endpoint { }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e4367cecad18..05a0fc23ac88 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1627,18 +1627,13 @@ du: display@feb00000 { compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; + reg = <0 0xfeb00000 0 0x70000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, - <&cpg CPG_MOD 725>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", - "lvds.1"; + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; status = "disabled"; ports { @@ -1653,11 +1648,65 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; }; }; port@2 { reg = <2>; du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7790-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds@feb94000 { + compatible = "renesas,r8a7790-lvds"; + reg = <0 0xfeb94000 0 0x1c>; + clocks = <&cpg CPG_MOD 725>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 725>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f40321a1c917..9d7213a0b8b8 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -468,10 +468,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -479,6 +478,13 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { port@1 { lvds_connector: endpoint { }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c14e6fe9e4f6..ae9ed9ff53ef 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -441,10 +441,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x3_clk>, <&x16_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -455,6 +454,17 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + &rcar_sound { pinctrl-0 = <&ssi_pins &audio_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index f11dab71b03a..506b20885413 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1633,15 +1633,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7791"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1656,6 +1653,33 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7791-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 9ed6961f2d9a..96e117d8b2cc 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -447,10 +447,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -458,6 +457,11 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + ports { port@1 { lvds_connector: endpoint { }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index f9c5a557107d..4f526030dc7c 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1292,15 +1292,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7793"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1315,6 +1312,34 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7793-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index c0743305f31b..eb96ac3e6c1d 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -12,6 +12,8 @@ #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { @@ -166,6 +168,8 @@ compatible = "st,stm32mp157-z-pinctrl"; ranges = <0 0x54004000 0x400>; pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; status = "disabled"; gpioz: gpio@54004000 { diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 9e17e42b02b2..4fa0df853c8a 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -183,6 +183,13 @@ status = "disabled"; }; + exti: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + }; + usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 77e8436beed4..3a1c6b45c9a1 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -76,7 +76,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; @@ -88,7 +88,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -99,7 +99,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 3328fe583c9b..232f124ce62c 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -117,6 +117,7 @@ phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts index d1311098ea45..ad173605b1b8 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -51,7 +51,7 @@ leds { /* The LEDs use PG0~2 pins, which conflict with MMC1 */ - status = "disbaled"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 0a7136462a1a..983dd5c14794 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -741,7 +741,7 @@ phy_type = "ulpi"; clocks = <&tegra_car TEGRA20_CLK_USB2>, <&tegra_car TEGRA20_CLK_PLL_U>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT4>; + <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; |
