diff options
Diffstat (limited to 'arch/arm/boot/dts')
21 files changed, 1109 insertions, 543 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e87f311ee9f2..bcd0c2835477 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -176,6 +176,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidhc1.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ exynos5422-odroidxu4.dtb \ diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 14f931896657..3743df4de390 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -227,28 +227,6 @@ vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - power-on-delay= <30>; - power-off-delay= <120>; - reset-delay = <5>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <29>; - panel-height-mm = <29>; - - display-timings { - timing-0 { - clock-frequency = <4600000>; - hactive = <320>; - vactive = <320>; - hfront-porch = <1>; - hback-porch = <1>; - hsync-len = <1>; - vfront-porch = <150>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index f7678869481a..a21be71000c1 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -31,8 +31,6 @@ pinctrl-0 = <&gpio_power_key>; power_key { - interrupt-parent = <&gpx1>; - interrupts = <3 IRQ_TYPE_NONE>; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 97882267ef09..acf48a018e5e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -43,8 +43,6 @@ pinctrl-0 = <&gpio_power_key &gpio_home_key>; home_key { - interrupt-parent = <&gpx2>; - interrupts = <2 IRQ_TYPE_NONE>; gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_HOME>; label = "home key"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index d867888e7b35..220cdf109405 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,6 +18,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/pinctrl/samsung.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -97,6 +98,34 @@ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vsil12: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + vcc33mhl: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc18mhl: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; gpio-keys { @@ -229,6 +258,36 @@ }; }; + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: hdmi-bridge@39 { + compatible = "sil,sii9234"; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x39>; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; + }; + camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; @@ -501,6 +560,29 @@ status = "okay"; }; +&hdmi { + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&i2c_5>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -579,6 +661,10 @@ }; }; +&i2c_5 { + status = "okay"; +}; + &i2c_7 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -873,12 +959,20 @@ }; }; +&i2c_8 { + status = "okay"; +}; + &i2s0 { pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; }; +&mixer { + status = "okay"; +}; + &mshc_0 { broken-cd; non-removable; @@ -904,6 +998,18 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep0>; + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + sleep0: sleep-states { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); @@ -1007,6 +1113,11 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + sleep1: sleep-states { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 18a7f396ac5f..0efd678b8251 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,6 +152,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; @@ -455,15 +457,9 @@ &i2c_2 { status = "okay"; - + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -489,15 +485,9 @@ &i2c_8 { status = "okay"; - + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -516,6 +506,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index de6752596774..1e3f9627766c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,6 +116,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; @@ -308,24 +310,16 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -344,6 +338,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 6360cfb38da9..2e7175d2b1b8 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -261,10 +261,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; @@ -450,13 +450,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -514,19 +510,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d53bfcbeb39c..47dbc50546c1 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,10 +91,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -362,13 +362,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -412,19 +408,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 222e2fb6e589..5286084e1032 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -367,6 +367,11 @@ clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; }; i2c_9: i2c@121D0000 { @@ -637,7 +642,7 @@ }; gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; @@ -647,7 +652,7 @@ }; gsc_1: gsc@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; @@ -657,7 +662,7 @@ }; gsc_2: gsc@13e20000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; @@ -667,7 +672,7 @@ }; gsc_3: gsc@13e30000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; @@ -687,6 +692,8 @@ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; samsung,syscon-phandle = <&pmu_system_controller>; + phy = <&hdmiphy>; + status = "disabled"; }; hdmicec: cec@101B0000 { @@ -702,7 +709,7 @@ status = "disabled"; }; - mixer@14450000 { + mixer: mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; @@ -711,6 +718,7 @@ <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; iommus = <&sysmmu_tv>; + status = "disabled"; }; dp_phy: video-phy { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 6531fbc3eeb7..bc78575d8a4d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -360,6 +360,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 5c052d7ff554..d7d703aa1699 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -36,6 +36,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu1: cpu@1 { @@ -48,6 +49,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -72,6 +75,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -85,6 +89,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -97,6 +102,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -109,6 +115,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -121,6 +128,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 683a4cfb4a23..38af8769711c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -696,6 +696,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08c8ab173e87..310d8637ce9f 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,6 +130,7 @@ &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -347,12 +348,12 @@ &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b94425a26108..8aa2cc7aa125 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -646,6 +646,7 @@ clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; iommus = <&sysmmu_tv>; + status = "disabled"; }; rotator: rotator@11C00000 { @@ -658,7 +659,7 @@ }; gsc_0: video-scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL0>; @@ -668,7 +669,7 @@ }; gsc_1: video-scaler@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL1>; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index bf3c6f1ec4ee..ec01d8020c2d 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -35,6 +35,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu1: cpu@101 { @@ -47,6 +48,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu2: cpu@102 { @@ -59,6 +61,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu3: cpu@103 { @@ -71,6 +74,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu4: cpu@0 { @@ -84,6 +88,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu5: cpu@1 { @@ -96,6 +101,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu6: cpu@2 { @@ -108,6 +114,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu7: cpu@3 { @@ -120,6 +127,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi new file mode 100644 index 000000000000..a5b8d0f0877e --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -0,0 +1,443 @@ +/* + * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; + +&bus_wcore { + devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, + <&nocp_mem1_0>, <&nocp_mem1_1>; + vdd-supply = <&buck3_reg>; + exynos,saturation-ratio = <100>; + status = "okay"; +}; + +&bus_noc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys2 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gen { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d_acp { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1_fimd { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gscl_scaler { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mscl { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + samsung,s2mps11-acokb-ground; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vddq_mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vddq_mmc2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "vdd_emmc_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; +}; + +&nocp_mem0_0 { + status = "okay"; +}; + +&nocp_mem0_1 { + status = "okay"; +}; + +&nocp_mem1_0 { + status = "okay"; +}; + +&nocp_mem1_1 { + status = "okay"; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo7_reg>; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +/* usbdrd_dwc3_1 mode customized in each board */ + +&usbdrd3_0 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts new file mode 100644 index 000000000000..fb8e8ae776e9 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -0,0 +1,213 @@ +/* + * Hardkernel Odroid HC1 board device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroid-core.dtsi" + +/ { + model = "Hardkernel Odroid HC1"; + compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * When reaching cpu0_alert0, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu4 0 2>; + }; + /* + * When reaching cpu0_alert1, reduce CPU + * further, down to 600 MHz (12 steps for big, + * 7 steps for LITTLE). + */ + map2 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + }; + +}; + +&pwm { + /* + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index c0b85981c6bf..da3141a307d5 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/sound/samsung-i2s.h> + / { sound: sound { compatible = "simple-audio-card"; @@ -43,6 +45,17 @@ }; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FIN_PLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <19200000>; +}; + &hsi2c_5 { status = "okay"; max98090: max98090@10 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 11aa39e50145..445c6c5a1300 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -12,32 +12,28 @@ * published by the Free Software Foundation. */ -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/sound/samsung-i2s.h> -#include "exynos5800.dtsi" -#include "exynos5422-cpus.dtsi" +#include <dt-bindings/input/input.h> +#include "exynos5422-odroid-core.dtsi" / { - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x7EA00000>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - firmware@2073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power_key { + /* + * The power button (SW2) is connected to the PWRON + * pin (active high) of the S2MPS11 PMIC, which acts + * as a 16ms debouce filter and signal inverter with + * output on ONOB pin (active low). ONOB PMIC pin is + * then connected to XEINT3 SoC pin. + */ + gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <0>; + wakeup-source; }; }; @@ -63,22 +59,22 @@ polling-delay-passive = <250>; polling-delay = <0>; trips { - cpu_alert0: cpu-alert-0 { + cpu0_alert0: cpu-alert-0 { temperature = <50000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert1: cpu-alert-1 { + cpu0_alert1: cpu-alert-1 { temperature = <60000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert2: cpu-alert-2 { + cpu0_alert2: cpu-alert-2 { temperature = <70000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_crit0: cpu-crit-0 { + cpu0_crit0: cpu-crit-0 { temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; @@ -87,59 +83,258 @@ * Exynos542x supports only 4 trip-points * so for these polling mode is required. * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 + * interrupt-driven trip: cpu0_alert2 */ - cpu_alert3: cpu-alert-3 { + cpu0_alert3: cpu-alert-3 { temperature = <70000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - cpu_alert4: cpu-alert-4 { + cpu0_alert4: cpu-alert-4 { temperature = <85000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - }; cooling-maps { map0 { - trip = <&cpu_alert0>; + trip = <&cpu0_alert0>; cooling-device = <&fan0 0 1>; }; map1 { - trip = <&cpu_alert1>; + trip = <&cpu0_alert1>; cooling-device = <&fan0 1 2>; }; map2 { - trip = <&cpu_alert2>; + trip = <&cpu0_alert2>; cooling-device = <&fan0 2 3>; }; /* - * When reaching cpu_alert3, reduce CPU + * When reaching cpu0_alert3, reduce CPU * by 2 steps. On Exynos5422/5800 that would * be: 1600 MHz and 1100 MHz. */ map3 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu0 0 2>; }; map4 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu4 0 2>; }; - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, + * When reaching cpu0_alert4, reduce CPU + * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ map5 { - trip = <&cpu_alert4>; + trip = <&cpu0_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu0_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu1_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu1_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu2_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu2_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu2_alert4>; cooling-device = <&cpu0 3 7>; }; map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; + trip = <&cpu2_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu3_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu3_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu4 3 12>; }; }; }; @@ -151,110 +346,9 @@ status = "okay"; }; -&bus_wcore { - devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, - <&nocp_mem1_0>, <&nocp_mem1_1>; - vdd-supply = <&buck3_reg>; - exynos,saturation-ratio = <100>; - status = "okay"; -}; - -&bus_noc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys2 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gen { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d_acp { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1_fimd { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gscl_scaler { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FIN_PLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <19200000>; -}; - -&cpu0 { - cpu-supply = <&buck6_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -269,246 +363,15 @@ needs-hpd; }; -&hsi2c_4 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - samsung,s2mps11-acokb-ground; - - interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&s2mps11_irq>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vddq_mmc0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "vdd_adc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vddq_mmc2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo18_reg: LDO18 { - regulator-name = "vdd_emmc_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo26_reg: LDO26 { - regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { @@ -530,48 +393,18 @@ vqmmc-supply = <&ldo3_reg>; }; -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; -}; - -&nocp_mem0_0 { - status = "okay"; -}; - -&nocp_mem0_1 { - status = "okay"; -}; - -&nocp_mem1_0 { - status = "okay"; -}; - -&nocp_mem1_1 { - status = "okay"; -}; - &pinctrl_0 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; + power_key: power-key { + samsung,pins = "gpx0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; - s2mps11_irq: s2mps11-irq { - samsung,pins = "gpx0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; }; @@ -584,45 +417,3 @@ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; }; - -&tmu_cpu0 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu1 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu2 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu3 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_gpu { - vtmu-supply = <&ldo7_reg>; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -/* usbdrd_dwc3_1 mode customized in each board */ - -&usbdrd3_0 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; - -&usbdrd3_1 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index b2ea88181f1b..a5007f182bc4 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -134,6 +134,7 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; @@ -154,6 +155,7 @@ reg = <0x12400000 0x10000>; phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; |
