diff options
Diffstat (limited to 'arch/arm/boot/dts')
173 files changed, 4822 insertions, 1188 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a7d40426c141..a2bb8324cae3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \ dtb-$(CONFIG_ARCH_EFM32) += \ efm32gg-dk3750.dtb dtb-$(CONFIG_ARCH_EXYNOS3) += \ + exynos3250-artik5-eval.dtb \ exynos3250-monk.dtb \ exynos3250-rinato.dtb dtb-$(CONFIG_ARCH_EXYNOS4) += \ @@ -177,6 +178,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ds109.dtb \ kirkwood-ds110jv10.dtb \ kirkwood-ds111.dtb \ + kirkwood-ds112.dtb \ kirkwood-ds209.dtb \ kirkwood-ds210.dtb \ kirkwood-ds212.dtb \ @@ -199,6 +201,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-linkstation-lswsxl.dtb \ kirkwood-linkstation-lswvl.dtb \ kirkwood-linkstation-lswxl.dtb \ + kirkwood-linksys-viper.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ @@ -214,6 +217,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa320.dtb \ kirkwood-nsa325.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ @@ -542,6 +546,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dra7-evm.dtb \ dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ + orion5x-kuroboxpro.dtb \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ @@ -565,7 +570,13 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ - arm-realview-pb11mp.dtb + arm-realview-pb11mp.dtb \ + arm-realview-eb.dtb \ + arm-realview-eb-11mp.dtb \ + arm-realview-eb-11mp-revb.dtb \ + arm-realview-eb-a9mp.dtb \ + arm-realview-pba8.dtb \ + arm-realview-pbx-a9.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-evb.dtb \ rk3036-kylin.dtb \ diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts new file mode 100644 index 000000000000..e68527b0d552 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "arm-realview-eb-11mp.dts" + +/ { + model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B"; +}; + +/* + * The revision B has a distinctly different layout of the syscon, so + * append a specific compatible-string. + */ +&syscon { + compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd"; +}; + +&intc { + reg = <0x10101000 0x1000>, + <0x10100100 0x100>; +}; + +&L2 { + reg = <0x10102000 0x1000>; +}; + +&scu { + reg = <0x10100000 0x100>; +}; + +&twd_timer { + reg = <0x10100600 0x20>; +}; + +&twd_wdog { + reg = <0x10100620 0x20>; +}; + +/* + * On revision B, we cannot reach the secondary interrupt + * controller, as a result, some peripherals that are dependent + * on their IRQ cannot be reached, so disable them. + */ +&intc_second { + status = "disabled"; +}; + +&gpio0 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&gpio2 { + status = "disabled"; +}; + +&serial2 { + status = "disabled"; +}; + +&serial3 { + status = "disabled"; +}; + +&ssp { + status = "disabled"; +}; + +&wdog { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts new file mode 100644 index 000000000000..87ff602a2a2d --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-eb-mp.dtsi" + +/ { + model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C"; + arm,hbi = <0x146>; + + /* + * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB. + * Reference: ARM DUI 0318F + * + * To run this machine with QEMU, specify the following: + * qemu-system-arm -M realview-eb-mpcore -smp cpus=4 + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + MP11_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <0>; + next-level-cache = <&L2>; + }; + + MP11_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <1>; + next-level-cache = <&L2>; + }; + + MP11_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <2>; + next-level-cache = <&L2>; + }; + + MP11_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; +}; + +&pmu { + interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts new file mode 100644 index 000000000000..967684b3636c --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts @@ -0,0 +1,70 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-eb-mp.dtsi" + +/ { + model = "ARM RealView EB Cortex A9 MPCore"; + + /* + * This is the Cortex A9 MPCore tile used with the + * RealView EB. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + A9_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + A9_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + A9_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + A9_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; +}; + +&pmu { + interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi new file mode 100644 index 000000000000..7b8d90b7aeea --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi @@ -0,0 +1,225 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "arm-realview-eb.dtsi" + +/* + * This is the common include file for all MPCore variants of the + * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B + * and Cortex-A9 MPCore. + */ +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-eb-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + /* Primary interrupt controller in the test chip */ + intc: interrupt-controller@1f000100 { + compatible = "arm,eb11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; + + /* Secondary interrupt controller on the FPGA */ + intc_second: interrupt-controller@10040000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x1f002000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s), probably for safety + * since th outer sync operation can cause the + * cache to hang unless disabled. + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,shared-override; + arm,parity-enable; + arm,outer-sync-disable; + }; + + scu: scu@1f000000 { + compatible = "arm,arm11mp-scu"; + reg = <0x1f000000 0x100>; + }; + + twd_timer: timer@1f000600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 13 0xf04>; + }; + + twd_wdog: watchdog@1f000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 14 0xf04>; + }; + + /* PMU with one IRQ line per core */ + pmu: pmu@0 { + compatible = "arm,arm11mpcore-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; + +/* + * This adapts all the peripherals to the interrupt routing + * to the GIC on the core tile. + */ + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&charlcd { + interrupt-parent = <&intc>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +/* + * On revision A, these peripherals does not have their IRQ lines + * routed to the core tile, but they can be reached on the secondary + * GIC. + */ +&gpio0 { + interrupt-parent = <&intc_second>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc_second>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc_second>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc_second>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&serial3 { + interrupt-parent = <&intc_second>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&ssp { + interrupt-parent = <&intc_second>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&wdog { + interrupt-parent = <&intc_second>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts new file mode 100644 index 000000000000..15431077f00c --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb.dts @@ -0,0 +1,166 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "arm-realview-eb.dtsi" + +/ { + model = "ARM RealView Emulation Baseboard"; + compatible = "arm,realview-eb"; + arm,hbi = <0x140>; + + /* + * This is the core tile with the CPU and GIC etc for the + * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache + * or PMU. + * + * To run this machine with QEMU, specify the following: + * qemu-system-arm -M realview-eb + * Unless specified, QEMU will emulate an ARM926EJ-S core tile. + * Switches -cpu arm1136 or -cpu arm1176 emulates the other + * core tiles. + */ + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-eb-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + intc: interrupt-controller@10040000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + }; + }; +}; + +/* + * This adapts all the peripherals to the interrupt routing + * to the GIC on the core tile. + */ + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&charlcd { + interrupt-parent = <&intc>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi new file mode 100644 index 000000000000..1c6a040218e3 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -0,0 +1,453 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + compatible = "arm,realview-eb"; + + chosen { }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet: ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb: usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + port1-otg; + }; + + /* These peripherals are inside the FPGA */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + }; + + i2c: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mmc: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + charlcd: fpga_charlcd: charlcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp: ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + wdog: watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + clcd: clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + clocks = <&oscclk0>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 652d85b28aaa..c789564f2803 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -394,6 +394,46 @@ reg = <0x10200000 0x4000>; bank-width = <1>; }; + + clcd@10112000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10112000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupt-names = "combined"; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&oscclk0>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 63d6a051839f..3944765ac4b0 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -627,16 +627,17 @@ }; }; + /* Standard 640x480 VGA timings */ panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; }; }; }; diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts new file mode 100644 index 000000000000..d3238c252b59 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pba8.dts @@ -0,0 +1,178 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + model = "ARM RealView Platform Baseboard for Cortex-A8"; + compatible = "arm,realview-pba8"; + arm,hbi = <0x178>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1e000000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000000 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&soc { + compatible = "arm,realview-pba8-soc", "simple-bus"; +}; + +&syscon { + compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd"; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts new file mode 100644 index 000000000000..db808f92dd79 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + /* + * This is the RealView Platform Baseboard Explore for Cortex-A9 + * (HBI0182 + HBI0183) as described in ARM DUI 0440B + */ + model = "ARM RealView Platform Baseboard Explore for Cortex-A9"; + arm,hbi = <0x182>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x1f002000 0x1000>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,parity-disable; + arm,tag-latency = <1>; + arm,data-latency = <1 1>; + arm,dirty-latency = <1>; + }; + + scu: scu@1f000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1f000000 0x100>; + }; + + twd_timer: timer@1f000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 13 0xf04>; + }; + + twd_wdog: watchdog@1f000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 14 0xf04>; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>, + <0 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, <&CPU1>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1f000000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi new file mode 100644 index 000000000000..aeb49c4bd773 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -0,0 +1,542 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + compatible = "arm,realview-pbx"; + + chosen { }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + refclk32khz: refclk32khz { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet: ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb: usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + port1-otg; + }; + + soc: soc@0 { + compatible = "arm,realview-pbx-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + }; + + sp810_syscon0: sysctl@10001000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x10001000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk0", + "timerclk1", + "timerclk2", + "timerclk3"; + assigned-clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&sp810_syscon0 2>, + <&sp810_syscon0 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + + i2c: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp: ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + wdog0: watchdog@1000f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x1000f000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + wdog1: watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&pclk>; + clock-names = "timerclk0", + "timerclk1", + "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + clocks = <&sp810_syscon0 2>, + <&sp810_syscon0 3>, + <&pclk>; + clock-names = "timerclk2", + "timerclk3", + "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + /* DVI serial bus control is at 10016000 */ + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + timer45: timer@10018000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10018000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk4", "timerclk5", "apb_pclk"; + }; + + timer67: timer@10019000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10019000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk6", "timerclk7", "apb_pclk"; + }; + + sp810_syscon1: sysctl@1001a000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x1001a000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk4", + "timerclk5", + "timerclk6", + "timerclk7"; + assigned-clocks = <&sp810_syscon1 0>, + <&sp810_syscon1 1>, + <&sp810_syscon1 2>, + <&sp810_syscon1 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + }; + + + /* These peripherals are inside the FPGA */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mmc: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; + + /* These peripherals are inside the NEC ISSP */ + issp { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + clcd: clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + clocks = <&oscclk4>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 3710755c6d76..6ebe9a78fc65 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -245,7 +245,7 @@ button@2 { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; @@ -260,7 +260,7 @@ }; sata { - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; @@ -313,7 +313,7 @@ &pinctrl { keys_pin: keys-pin { - marvell,pins = "mpp24", "mpp47"; + marvell,pins = "mpp24", "mpp29"; marvell,function = "gpio"; }; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index b89e6cf1271a..7a461541ce50 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -304,13 +304,13 @@ button@1 { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; button@2 { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index b1ad7cf6ac02..16331aa79775 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -1,7 +1,7 @@ #include "skeleton.dtsi" / { - nvic: nv-interrupt-controller { + nvic: interrupt-controller@e000e100 { compatible = "arm,armv7m-nvic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi index acd4fe1833f2..ce7fca76b0d6 100644 --- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -13,28 +13,28 @@ */ &adc { - ncp15wb473@3 { + thermistor3 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 3>; }; - ncp15wb473@4 { + thermistor4 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; }; - ncp15wb473@5 { + thermistor5 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 5>; }; - ncp15wb473@6 { + thermistor6 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 645549e14237..101d1a16b0ac 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -16,14 +16,14 @@ compatible = "enbw,cmc", "ti,da850"; model = "EnBW CMC"; - soc { - serial0: serial@1c42000 { + soc@1c00000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index ef061e9a2315..1a15db8e376b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -14,8 +14,8 @@ compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; - soc { - pmx_core: pinmux@1c14120 { + soc@1c00000 { + pmx_core: pinmux@14120 { status = "okay"; mcasp0_pins: pinmux_mcasp0_pins { @@ -30,19 +30,19 @@ >; }; }; - serial0: serial@1c42000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { status = "okay"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { status = "okay"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; @@ -66,17 +66,17 @@ }; }; - wdt: wdt@1c21000 { + wdt: wdt@21000 { status = "okay"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { max-frequency = <50000000>; bus-width = <4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; - spi1: spi@1f0e000 { + spi1: spi@30e000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; @@ -116,18 +116,18 @@ }; }; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; bus_freq = <2200000>; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mii_pins>; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 226cda76e77c..c9bf27d5ee9c 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - intc: interrupt-controller { + intc: interrupt-controller@fffee000 { compatible = "ti,cp-intc"; interrupt-controller; #interrupt-cells = <1>; @@ -23,7 +23,7 @@ reg = <0xfffee000 0x2000>; }; }; - soc { + soc@1c00000 { compatible = "simple-bus"; model = "da850"; #address-cells = <1>; @@ -31,7 +31,7 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; - pmx_core: pinmux@1c14120 { + pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; #address-cells = <1>; @@ -63,6 +63,12 @@ 0x10 0x00002200 0x0000ff00 >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,bits = < + /* I2C1_SDA, I2C1_SCL */ + 0x10 0x00440000 0x00ff0000 + >; + }; mmc0_pins: pinmux_mmc_pins { pinctrl-single,bits = < /* MMCSD0_DAT[3] MMCSD0_DAT[2] @@ -150,7 +156,7 @@ }; }; - edma0: edma@01c00000 { + edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ reg = <0x0 0x8000>; @@ -161,19 +167,19 @@ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; }; - edma0_tptc0: tptc@01c08000 { + edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; }; - edma0_tptc1: tptc@01c08400 { + edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; }; - edma1: edma@01e30000 { + edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ reg = <0x230000 0x8000>; @@ -184,41 +190,41 @@ ti,tptcs = <&edma1_tptc0 7>; }; - edma1_tptc0: tptc@01e38000 { + edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; }; - serial0: serial@1c42000 { + serial0: serial@42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { compatible = "ns16550a"; reg = <0x10c000 0x100>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { compatible = "ns16550a"; reg = <0x10d000 0x100>; reg-shift = <2>; interrupts = <61>; status = "disabled"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { compatible = "ti,da830-rtc"; reg = <0x23000 0x1000>; interrupts = <19 19>; status = "disabled"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { compatible = "ti,davinci-i2c"; reg = <0x22000 0x1000>; interrupts = <15>; @@ -226,12 +232,20 @@ #size-cells = <0>; status = "disabled"; }; - wdt: wdt@1c21000 { + i2c1: i2c@228000 { + compatible = "ti,davinci-i2c"; + reg = <0x228000 0x1000>; + interrupts = <51>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; status = "disabled"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; interrupts = <16>; @@ -239,7 +253,7 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mmc1: mmc@1e1b000 { + mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; interrupts = <72>; @@ -247,37 +261,37 @@ dma-names = "rx", "tx"; status = "disabled"; }; - ehrpwm0: ehrpwm@01f00000 { + ehrpwm0: ehrpwm@300000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; status = "disabled"; }; - ehrpwm1: ehrpwm@01f02000 { + ehrpwm1: ehrpwm@302000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; status = "disabled"; }; - ecap0: ecap@01f06000 { + ecap0: ecap@306000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; status = "disabled"; }; - ecap1: ecap@01f07000 { + ecap1: ecap@307000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; status = "disabled"; }; - ecap2: ecap@01f08000 { + ecap2: ecap@308000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; status = "disabled"; }; - spi1: spi@1f0e000 { + spi1: spi@30e000 { #address-cells = <1>; #size-cells = <0>; compatible = "ti,da830-spi"; @@ -289,13 +303,13 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { compatible = "ti,davinci-dm6467-emac"; reg = <0x220000 0x4000>; ti,davinci-ctrl-reg-offset = <0x3000>; @@ -309,9 +323,10 @@ 36 >; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; + #gpio-cells = <2>; reg = <0x226000 0x1000>; interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH @@ -323,7 +338,7 @@ status = "disabled"; }; - mcasp0: mcasp@01d00000 { + mcasp0: mcasp@100000 { compatible = "ti,da830-mcasp-audio"; reg = <0x100000 0x2000>, <0x102000 0x400000>; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 8c24975e8f9d..a35b851e1cd7 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -105,8 +105,8 @@ &pfc { uart1_pins: serial@e1030000 { - renesas,groups = "uart1_ctrl", "uart1_data"; - renesas,function = "uart1"; + groups = "uart1_ctrl", "uart1_data"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts new file mode 100644 index 000000000000..be4d6aa379f3 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -0,0 +1,43 @@ +/* + * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's ARTIK5 evaluation board + * which is based on Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos3250-artik5.dtsi" + +/ { + model = "Samsung ARTIK5 evaluation board"; + compatible = "samsung,artik5-eval", "samsung,artik5", + "samsung,exynos3250", "samsung,exynos3"; +}; + +&mshc_2 { + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&ldo3_reg>; + card-detect-delay = <200>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi new file mode 100644 index 000000000000..130e946f1414 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -0,0 +1,334 @@ +/* + * Samsung's Exynos3250 based ARTIK5 module device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's ARTIK5 module which is based on + * Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos3250.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + chosen { + stdout-path = &serial_2; + }; + + memory { + reg = <0x40000000 0x1ff00000>; + }; + + firmware@0205f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0205f000 0x1000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo7_reg>; + assigned-clocks = <&cmu CLK_SCLK_TSADC>; + assigned-clock-rates = <6000000>; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + s2mps14_pmic@66 { + compatible = "samsung,s2mps14-pmic"; + interrupt-parent = <&gpx3>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x66>; + + s2mps14_osc: clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", + "s2mps14_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + /* VDD_ALIVE15x */ + regulator-name = "VLDO1_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + /* VDDQM176 ~ VDDQM185 */ + regulator-name = "VLDO2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + /* + * VDD1_E106 ~ VDD1_E111 + * DVDD_RTC_AP, DVDD_MMC2_AP + */ + regulator-name = "VLDO3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + /* AVDD_PLL1120 ~ AVDD_PLL11201 */ + regulator-name = "VLDO4_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */ + regulator-name = "VLDO5_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + /* VDD_USB, VDD10_HSIC */ + regulator-name = "VLDO6_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + /* + * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2, + * AVDD_ADC, AVDD_ABB_0, M4S_VDD18 + */ + regulator-name = "VLDO7_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + /* AVDD33_UOTG */ + regulator-name = "VLDO8_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + /* VDDQ_E86 ~ VDDQ_E105*/ + regulator-name = "VLDO9_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VLDO10_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo11_reg: LDO11 { + /* VDD74 ~ VDD75 */ + regulator-name = "VLDO11_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo12_reg: LDO12 { + /* VDD72 ~ VDD73 */ + regulator-name = "VLDO12_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VLDO13_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VLDO14_2.7V"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VLDO_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VLDO16_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VLDO17_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo18_reg: LDO18 { + /* DVDD_MMC2_AP */ + regulator-name = "VLDO18_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VLDO19_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "VLDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "VLDO21_1.25V"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "VLDO22_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo23_reg: LDO23 { + /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */ + regulator-name = "VLDO23_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VLDO24_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "VLDO25_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + /* VDD_MIF */ + regulator-name = "VBUCK1_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + /* VDD_CPU */ + regulator-name = "VBUCK2_1.2V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + /* VDD_G3D */ + regulator-name = "VBUCK3_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VBUCK4_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "VBUCK5_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&mshc_0 { + num-slots = <1>; + non-removable; + cap-mmc-highspeed; + card-detect-delay = <200>; + vmmc-supply = <&ldo12_reg>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + status = "okay"; +}; + +&rtc { + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 9e2840b59ae8..267f81adb42f 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -558,7 +558,17 @@ &pinctrl_1 { pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; + pinctrl-0 = <&initial1 &sleep1>; + + initial1: initial-state { + PIN_IN(gpk2-0, DOWN, LV1); + PIN_IN(gpk2-1, DOWN, LV1); + PIN_IN(gpk2-2, DOWN, LV1); + PIN_IN(gpk2-3, DOWN, LV1); + PIN_IN(gpk2-4, DOWN, LV1); + PIN_IN(gpk2-5, DOWN, LV1); + PIN_IN(gpk2-6, DOWN, LV1); + }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index 5ab81c39e2c9..40ea7de44933 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -16,11 +16,49 @@ #define PIN_PULL_DOWN 1 #define PIN_PULL_UP 3 +#define PIN_DRV_LV1 0 +#define PIN_DRV_LV2 2 +#define PIN_DRV_LV3 1 +#define PIN_DRV_LV4 3 + #define PIN_PDN_OUT0 0 #define PIN_PDN_OUT1 1 #define PIN_PDN_INPUT 2 #define PIN_PDN_PREV 3 +#define PIN_IN(_pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <0>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +#define PIN_OUT(_pin, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <1>; \ + samsung,pin-pud = <0>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +#define PIN_OUT_SET(_pin, _val, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <1>; \ + samsung,pin-pud = <0>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + samsung,pin-val = <_val>; \ + } + +#define PIN_CFG(_pin, _sel, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <_sel>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ samsung,pins = #_pin; \ @@ -120,6 +158,13 @@ samsung,pin-drv = <0>; }; + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; @@ -445,6 +490,41 @@ samsung,pin-drv = <3>; }; + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + cam_port_b_io: cam-port-b-io { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f102f3a1ab1..31eb09bae0a2 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -681,7 +681,21 @@ &pinctrl_0 { pinctrl-names = "default"; - pinctrl-0 = <&sleep0>; + pinctrl-0 = <&initial0 &sleep0>; + + initial0: initial-state { + PIN_IN(gpa1-4, DOWN, LV1); + PIN_IN(gpa1-5, DOWN, LV1); + + PIN_IN(gpc0-0, DOWN, LV1); + PIN_IN(gpc0-1, DOWN, LV1); + PIN_IN(gpc0-2, DOWN, LV1); + PIN_IN(gpc0-3, DOWN, LV1); + PIN_IN(gpc0-4, DOWN, LV1); + + PIN_IN(gpd0-0, DOWN, LV1); + PIN_IN(gpd0-1, DOWN, LV1); + }; sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, DOWN); @@ -735,7 +749,60 @@ &pinctrl_1 { pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; + pinctrl-0 = <&initial1 &sleep1>; + + initial1: initial-state { + PIN_IN(gpe0-6, DOWN, LV1); + PIN_IN(gpe0-7, DOWN, LV1); + + PIN_IN(gpe1-0, DOWN, LV1); + PIN_IN(gpe1-3, DOWN, LV1); + PIN_IN(gpe1-4, DOWN, LV1); + PIN_IN(gpe1-5, DOWN, LV1); + PIN_IN(gpe1-6, DOWN, LV1); + + PIN_IN(gpk2-0, DOWN, LV1); + PIN_IN(gpk2-1, DOWN, LV1); + PIN_IN(gpk2-2, DOWN, LV1); + PIN_IN(gpk2-3, DOWN, LV1); + PIN_IN(gpk2-4, DOWN, LV1); + PIN_IN(gpk2-5, DOWN, LV1); + PIN_IN(gpk2-6, DOWN, LV1); + + PIN_IN(gpm0-0, DOWN, LV1); + PIN_IN(gpm0-1, DOWN, LV1); + PIN_IN(gpm0-2, DOWN, LV1); + PIN_IN(gpm0-3, DOWN, LV1); + PIN_IN(gpm0-4, DOWN, LV1); + PIN_IN(gpm0-5, DOWN, LV1); + PIN_IN(gpm0-6, DOWN, LV1); + PIN_IN(gpm0-7, DOWN, LV1); + + PIN_IN(gpm1-0, DOWN, LV1); + PIN_IN(gpm1-1, DOWN, LV1); + PIN_IN(gpm1-2, DOWN, LV1); + PIN_IN(gpm1-3, DOWN, LV1); + PIN_IN(gpm1-4, DOWN, LV1); + PIN_IN(gpm1-5, DOWN, LV1); + PIN_IN(gpm1-6, DOWN, LV1); + + PIN_IN(gpm2-0, DOWN, LV1); + PIN_IN(gpm2-1, DOWN, LV1); + + PIN_IN(gpm3-0, DOWN, LV1); + PIN_IN(gpm3-1, DOWN, LV1); + PIN_IN(gpm3-2, DOWN, LV1); + PIN_IN(gpm3-3, DOWN, LV1); + PIN_IN(gpm3-4, DOWN, LV1); + + PIN_IN(gpm4-1, DOWN, LV1); + PIN_IN(gpm4-2, DOWN, LV1); + PIN_IN(gpm4-3, DOWN, LV1); + PIN_IN(gpm4-4, DOWN, LV1); + PIN_IN(gpm4-5, DOWN, LV1); + PIN_IN(gpm4-6, DOWN, LV1); + PIN_IN(gpm4-7, DOWN, LV1); + }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 137f9015d4e8..094782b207ee 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -31,6 +31,7 @@ pinctrl1 = &pinctrl_1; mshc0 = &mshc_0; mshc1 = &mshc_1; + mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -43,6 +44,7 @@ i2c7 = &i2c_7; serial0 = &serial_0; serial1 = &serial_1; + serial2 = &serial_2; }; cpus { @@ -153,7 +155,7 @@ interrupt-parent = <&gic>; }; - mipi_phy: video-phy@10020710 { + mipi_phy: video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; syscon = <&pmu_system_controller>; @@ -357,6 +359,18 @@ status = "disabled"; }; + mshc_2: mshc@12530000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12530000 0x1000>; + interrupts = <0 144 0>; + clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + exynos_usbphy: exynos-usbphy@125B0000 { compatible = "samsung,exynos3250-usb2-phy"; reg = <0x125B0000 0x100>; @@ -452,6 +466,17 @@ status = "disabled"; }; + serial_2: serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 111 0>; + clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "disabled"; + }; + i2c_0: i2c@13860000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index c679b3cc3c48..021f52d43ff7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -82,7 +82,7 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy@10020710 { + mipi_phy: video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; syscon = <&pmu_system_controller>; @@ -743,6 +743,18 @@ status = "disabled"; }; + hdmicec: cec@100B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x100B0000 0x200>; + interrupts = <0 114 0>; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer: mixer@12C10000 { compatible = "samsung,exynos4210-mixer"; interrupts = <0 91 0>; @@ -969,6 +981,15 @@ #iommu-cells = <0>; }; + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + status = "disabled"; + }; + prng: rng@10830400 { compatible = "samsung,exynos4-rng"; reg = <0x10830400 0x200>; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index a7c212891674..9331c6252eff 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -820,6 +820,13 @@ samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 5e5d3fecb04c..acd7e7b5fd13 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -188,6 +188,10 @@ status = "okay"; }; +&hdmicec { + status = "okay"; +}; + &hsotg { dr_mode = "peripheral"; status = "okay"; @@ -492,6 +496,10 @@ status = "okay"; }; +&sss { + status = "okay"; +}; + &tmu { vtmu-supply = <&ldo10_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index ed017cc7b14f..27dbf1687754 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -146,13 +146,13 @@ reg = <0x66>; regulators { - esafeout1_reg: ESAFEOUT1@1 { + esafeout1_reg: ESAFEOUT1 { regulator-name = "ESAFEOUT1"; }; - esafeout2_reg: ESAFEOUT2@2 { + esafeout2_reg: ESAFEOUT2 { regulator-name = "ESAFEOUT2"; }; - charger_reg: CHARGER@0 { + charger_reg: CHARGER { regulator-name = "CHARGER"; regulator-min-microamp = <60000>; regulator-max-microamp = <2580000>; @@ -251,7 +251,7 @@ "SPK", "SPKOUTRP"; }; - thermistor-ap@0 { + thermistor-ap { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ @@ -259,7 +259,7 @@ io-channels = <&adc 1>; /* AP temperature */ }; - thermistor-battery@1 { + thermistor-battery { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ @@ -1276,7 +1276,7 @@ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3 { + s5c73m3_spi: s5c73m3@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; @@ -1286,6 +1286,10 @@ }; }; +&sss { + status = "okay"; +}; + &tmu { vtmu-supply = <&ldo10_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index bac25c672789..856b29254374 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -885,6 +885,13 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl_2: pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 84a23f962946..b7490ea0c75c 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -179,7 +179,7 @@ ranges; status = "disabled"; - pmu { + pmu@10020000 { reg = <0x10020000 0x3000>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 8b2acc74aa76..1e25152dc0f6 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -133,7 +133,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 2560x1600 DP panel */ clock-frequency = <50000>; hactive = <2560>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 0f5dcd418af8..0e2eb3f6b590 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -29,7 +29,7 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - vdd: fixed-regulator@0 { + vdd: fixed-regulator-vdd { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; regulator-min-microvolt = <1800000>; @@ -37,7 +37,7 @@ regulator-always-on; }; - dbvdd: fixed-regulator@1 { + dbvdd: fixed-regulator-dbvdd { compatible = "regulator-fixed"; regulator-name = "dbvdd-supply"; regulator-min-microvolt = <3300000>; @@ -45,7 +45,7 @@ regulator-always-on; }; - spkvdd: fixed-regulator@2 { + spkvdd: fixed-regulator-spkvdd { compatible = "regulator-fixed"; regulator-name = "spkvdd-supply"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 1280x800 */ clock-frequency = <50000>; hactive = <1280>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 95210ef6a6b5..c9889b1f530a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -84,7 +84,7 @@ sbs,poll-retry-count = <1>; }; - cros_ec: embedded-controller { + cros_ec: embedded-controller@1e { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 IRQ_TYPE_NONE>; @@ -94,7 +94,7 @@ wakeup-source; }; - power-regulator { + power-regulator@48 { compatible = "ti,tps65090"; reg = <0x48>; @@ -244,7 +244,7 @@ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port@0 { + port0 { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -428,7 +428,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - trackpad { + trackpad@67 { reg = <0x67>; compatible = "cypress,cyapa"; interrupts = <2 IRQ_TYPE_NONE>; @@ -487,13 +487,13 @@ edid-emulation = <5>; ports { - port@0 { + port0 { bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port@1 { + port1 { bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 0f500cb1eb2d..273d66282ebc 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -383,7 +383,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - cros_ec: embedded-controller { + cros_ec: embedded-controller@1e { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index e653ae04015a..c7158b2fb213 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -596,7 +596,7 @@ pinctrl-0 = <&i2s2_bus>; }; - usb@12000000 { + usb_dwc3 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USB3>; clock-names = "usbdrd30"; @@ -604,7 +604,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3: dwc3 { + usbdrd_dwc3: dwc3@12000000 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -763,7 +763,7 @@ iommu = <&sysmmu_gsc3>; }; - hdmi: hdmi { + hdmi: hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; power-domains = <&pd_disp1>; @@ -776,7 +776,7 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - mixer { + mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; @@ -787,7 +787,7 @@ iommus = <&sysmmu_tv>; }; - dp_phy: video-phy@10040720 { + dp_phy: video-phy { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 3981ddb25036..e36975b6f625 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -165,7 +165,7 @@ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { - port@0 { + port0 { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -633,13 +633,13 @@ use-external-pwm; ports { - port@0 { + port0 { bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port@1 { + port1 { bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 0785fedf441e..99160f796851 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -111,7 +111,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { clock-frequency = <50000>; hactive = <2560>; vactive = <1600>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7b99cb58d82d..385491aa539a 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -551,13 +551,13 @@ clock-names = "timers"; }; - dp_phy: video-phy@10040728 { + dp_phy: dp-video-phy { compatible = "samsung,exynos5420-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040714 { + mipi_phy: mipi-video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; syscon = <&pmu_system_controller>; #phy-cells = <1>; @@ -913,7 +913,7 @@ clock-names = "secss"; }; - usbdrd3_0: usb@12000000 { + usbdrd3_0: usb3-0 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; @@ -921,7 +921,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_0: dwc3 { + usbdrd_dwc3_0: dwc3@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -939,7 +939,7 @@ #phy-cells = <1>; }; - usbdrd3_1: usb@12400000 { + usbdrd3_1: usb3-1 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USBD301>; clock-names = "usbdrd30"; @@ -947,7 +947,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_1: dwc3 { + usbdrd_dwc3_1: dwc3@12400000 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1bd507bfa750..0e71d4253205 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -121,10 +121,9 @@ }; ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; + regulator-name = "vddq_mmc0"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; }; ldo5_reg: LDO5 { @@ -184,10 +183,9 @@ }; ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; + regulator-name = "vddq_mmc2"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; ldo15_reg: LDO15 { @@ -211,11 +209,16 @@ regulator-always-on; }; + ldo18_reg: LDO18 { + regulator-name = "vdd_emmc_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; ldo24_reg: LDO24 { @@ -347,6 +350,8 @@ cap-mmc-highspeed; mmc-hs200-1_8v; mmc-hs400-1_8v; + vmmc-supply = <&ldo18_reg>; + vqmmc-supply = <&ldo3_reg>; }; &mmc_2 { @@ -359,6 +364,8 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; }; &pinctrl_0 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index b9342ec5b9cf..fd176819b4bf 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -132,7 +132,7 @@ clock-names = "spi", "spi_busclk0"; }; - pin_ctrl: pinctrl { + pin_ctrl: pinctrl@E0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, @@ -205,7 +205,7 @@ ranges; }; - rtc { + rtc@130000 { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 9e6e9e2691d5..d573e03f3134 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 7dc7d6782e83..748d0b62f233 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 4680eec990f0..bb63d2d50fc5 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 9e1f741d74ff..720c210d491d 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index d2936ad3af1d..d091ecb61cd2 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -33,17 +33,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - /* Wifi model has Atheros chipset on pcie port */ - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -199,3 +188,11 @@ }; }; +/* Wifi model has Atheros chipset on pcie port */ +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts index fa02a9aff05e..f16a73e49a88 100644 --- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts @@ -36,13 +36,13 @@ gpio_keys { compatible = "gpio-keys"; - button@1{ + reset { label = "Reset"; linux,code = <KEY_POWER>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - button@2{ + button { label = "Power"; linux,code = <KEY_SLEEP>; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 7ec76566acf2..555b7e4c58a5 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index c39dd766c75a..aee6f02b1c80 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -17,14 +17,12 @@ / { model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; +}; - mbus { - pcie-controller { - status = "okay"; +&pciec { + status = "okay"; +}; - pcie@1,0 { - status = "okay"; - }; - }; - }; +&pcie0 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index 701c6b6cdaa2..e8b23e13ec0c 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -17,18 +17,16 @@ / { model = "Marvell DB-88F6282-BP Development Board"; compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; +}; - mbus { - pcie-controller { - status = "okay"; +&pciec { + status = "okay"; +}; - pcie@1,0 { - status = "okay"; - }; +&pcie0 { + status = "okay"; +}; - pcie@2,0 { - status = "okay"; - }; - }; - }; +&pcie1 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 0473fcc260f7..41acbb6dd6ab 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 =< &pmx_led_usb @@ -203,7 +193,7 @@ }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -276,3 +266,11 @@ &rtc { status = "disabled"; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 113dcf056dcf..d8fca9db46d0 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -13,17 +13,17 @@ &pmx_button_reset>; pinctrl-names = "default"; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; - button@2 { + eject { label = "USB unmount button"; linux,code = <KEY_EJECTCD>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@3 { + reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index 61f47fbe44d0..a85a4664431b 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -40,6 +40,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index b84af3da8c84..6cef4bdbc01b 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -44,6 +44,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 99afd462f956..7f32e7abffac 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -43,6 +43,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index 623cd4a37d71..72e58307416d 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -48,6 +48,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index a0a1fad8b4de..aaaf31b81522 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -44,6 +44,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index bfa5edde179c..ef84d8699a76 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -62,12 +62,12 @@ pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 38e31d15a62d..d25184ae4af3 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -19,16 +19,6 @@ linux,initrd-end = <0x4800000>; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { @@ -136,13 +126,13 @@ pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; - button@1 { + otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; @@ -194,3 +184,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi index 8367c772c764..7962bdefde49 100644 --- a/arch/arm/boot/dts/kirkwood-km_common.dtsi +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -4,16 +4,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; @@ -34,7 +24,7 @@ }; }; - i2c@0 { + i2c { compatible = "i2c-gpio"; gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ @@ -46,3 +36,11 @@ status = "okay"; chip-delay = <25>; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 24425660e973..1b0f070c2676 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -27,15 +27,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { serial@12000 { status = "okay"; @@ -62,7 +53,7 @@ gpio_keys { compatible = "gpio-keys"; - button@1{ + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -169,3 +160,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 69061b6e987b..36c54c9dfa30 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -49,15 +49,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_power_hdd0: pmx-power-hdd0 { @@ -200,3 +191,11 @@ }; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts new file mode 100644 index 000000000000..345fcac48dc7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -0,0 +1,240 @@ +/* + * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500) + * + * (c) 2013 Jonas Gorski <jogo@openwrt.org> + * (c) 2013 Deutsche Telekom Innovation Laboratories + * (c) 2014 Luka Perkov <luka@openwrt.org> + * (c) 2014 Randy C. Will <randall.will@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Linksys Viper (E4200v2 / EA4500)"; + compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; + pinctrl-names = "default"; + + wps { + label = "WPS Button"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + + white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + white-pulse { + label = "viper:white:pulse"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; + + dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; + + switch@16,0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <16 0>; /* MDIO address 16, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + pmx_led_white_health: pmx-led-white-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + pmx_led_white_pulse: pmx-led-white-pulse { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u_env"; + reg = <0x80000 0x20000>; + }; + + partition@A0000 { + label = "s_env"; + reg = <0xA0000 0x20000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x2A0000>; + }; + + partition@4A0000 { + label = "rootfs"; + reg = <0x4A0000 0x1760000>; + }; + + partition@1C00000 { + label = "alt_kernel"; + reg = <0x1C00000 0x2A0000>; + }; + + partition@1EA0000 { + label = "alt_rootfs"; + reg = <0x1EA0000 0x1760000>; + }; + + partition@3600000 { + label = "syscfg"; + reg = <0x3600000 0x4A00000>; + }; + + partition@C0000 { + label = "unused"; + reg = <0xC0000 0x140000>; + }; + + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. + */ +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch at port 6. However DSA only supports a + * single CPU port. So leave this port disabled to avoid confusion. + */ +ð1 { + status = "disabled"; +}; + +/* There is no battery on the board, so the RTC does not keep + * time when there is no power, making it useless. + */ +&rtc { + status = "disabled"; +}; + diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 1d6528d82969..8b7c6ce79a41 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -107,18 +107,18 @@ &pmx_power_auto_switch>; pinctrl-names = "default"; - button@1 { + option { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - button@2 { + reserved { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - button@3 { + power { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; @@ -133,28 +133,28 @@ &pmx_led_function_blue>; pinctrl-names = "default"; - led@1 { + func_blue { label = "lsxl:blue:func"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - led@2 { + alarm { label = "lsxl:red:alarm"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - led@3 { + info { label = "lsxl:amber:info"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - led@4 { + power { label = "lsxl:blue:power"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - led@5 { + func_red { label = "lsxl:red:func"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index f3a991837515..aa413b0bcce2 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -17,16 +17,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_led_health: pmx-led-health { @@ -215,3 +205,11 @@ phy-handle = <ðphy1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index b7e7d78c484e..172a38c0b8a9 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -31,16 +31,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pin-controller@10000 { pmx_usb_led: pmx-usb-led { @@ -109,19 +99,19 @@ pinctrl-0 = <&pmx_keys>; pinctrl-names = "default"; - button@1 { + restart { label = "SWR Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@2 { + wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <1>; #size-cells = <0>; @@ -179,3 +169,11 @@ duplex = <1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts index 7427ec50b829..f53bcacf6b63 100644 --- a/arch/arm/boot/dts/kirkwood-nas2big.dts +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { rtc@10300 { /* The on-chip RTC is not powered (no supercap). */ @@ -141,3 +131,11 @@ reg = <0x9100000 0x6f00000>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index fd733c63bc27..c0413b63cf2e 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -193,7 +183,7 @@ #address-cells = <1>; #size-cells = <0>; - usb3_regulator: usb3-regulator { + usb3_regulator: usb3-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB 3.0 Power"; @@ -251,3 +241,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index b514d643fb6c..2bfc6cfa151d 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -28,18 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - /* Connected to NEC uPD720200 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -205,7 +193,7 @@ #address-cells = <1>; #size-cells = <0>; - usb3_regulator: usb3-regulator { + usb3_regulator: usb3-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB 3.0 Power"; @@ -265,3 +253,12 @@ phy-handle = <ðphy0>; }; }; + +/* Connected to NEC uPD720200 USB 3.0 controller */ +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index 62515a8b99b9..52b58fe0c4fe 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -59,22 +59,22 @@ #size-cells = <0>; /* - * button@1 and button@2 represent a three position rocker + * esc and power represent a three position rocker * switch. Thus the conventional KEY_POWER does not fit */ - button@1 { + exc { label = "Back power switch (on|auto)"; linux,code = <KEY_ESC>; linux,input-type = <5>; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - button@2 { + power { label = "Back power switch (auto|off)"; linux,code = <KEY_1>; linux,input-type = <5>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - button@3 { + option { label = "Function button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e832b6320264..282605f4c92c 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -57,7 +57,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -83,7 +83,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@X { /* overwrite reg property in board file */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 6139df0f376c..0b69ee4934fa 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -15,16 +15,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_unknown>; @@ -138,3 +128,11 @@ }; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d1044d..6ab104b4bb42 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -27,16 +27,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -193,10 +183,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ }; @@ -213,3 +212,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts index bc4ec9332387..36c64816bf7f 100644 --- a/arch/arm/boot/dts/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -236,3 +226,10 @@ }; }; +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 2075a2e828f1..e09b79ac73fd 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -4,16 +4,6 @@ / { model = "ZyXEL NSA310"; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { @@ -77,17 +67,17 @@ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; pinctrl-names = "default"; - button@1 { + power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - button@2 { + copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - button@3 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; @@ -157,3 +147,11 @@ reg = <0x5040000 0x2fc0000>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index fb9dc227255d..0db0e3edc88f 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index d5e3bc518968..cf2f5240e176 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + button { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index 24f1d30970a0..e4ecab112601 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; @@ -125,3 +115,7 @@ reg = <0x0600000 0x1FA00000>; }; }; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 8082d64266a3..b2f26239d298 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&pmx_button_eject>; pinctrl-names = "default"; - button@1 { + eject { debounce_interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index e0b959396ca2..b8af907249fb 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -29,16 +29,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_usb_power>; @@ -108,4 +98,12 @@ ethernet0-port@0 { phy-handle = <ðphy0>; }; -};
\ No newline at end of file +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index f2e08b3b33ea..6f771a99cb02 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -19,7 +19,7 @@ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa@0 { + dsa { switch@0 { reg = <10 0>; /* MDIO address 10, switch 0 in tree */ }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index f4272b64ed7f..1a797381d3d4 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -19,7 +19,7 @@ model = "Marvell RD88f6281 Reference design, with Z0 SoC"; compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa@0 { + dsa { switch@0 { reg = <0 0>; /* MDIO address 0, switch 0 in tree */ port@4 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d195e884b3b5..d5aacf137e40 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -63,7 +53,7 @@ }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -134,3 +124,11 @@ duplex = <1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 3b19f1fd4cac..2c722ecd5331 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -44,6 +44,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 04015c174b99..65e9524e852a 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -10,20 +10,6 @@ */ / { - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - - pcie2: pcie@2,0 { - status = "disabled"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_alarmled_12: pmx-alarmled-12 { @@ -861,3 +847,11 @@ phy-handle = <ðphy1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index ed956b849a71..3500f4738fb0 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -30,16 +30,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_i2s &pmx_sysrst>; @@ -173,7 +163,7 @@ pinctrl-0 = <&pmx_button_power>; pinctrl-names = "default"; - button@1 { + power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; @@ -217,7 +207,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@8 { device_type = "ethernet-phy"; reg = <8>; }; @@ -229,3 +219,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 9767d73f3857..ee62204e4ecd 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -39,12 +39,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index bfc1a32d4e42..3437bb396844 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -5,16 +5,6 @@ #include "kirkwood-ts219.dtsi" / { - mbus { - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { @@ -49,12 +39,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; @@ -63,3 +53,5 @@ }; ðphy0 { reg = <0>; }; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0e46560551f4..62e5e2d5c348 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -12,16 +12,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { i2c@11000 { status = "okay"; @@ -94,7 +84,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@X { /* overwrite reg property in board file */ }; }; @@ -105,3 +95,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts index d7512d4cdced..e3e71f48acc8 100644 --- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts @@ -16,17 +16,8 @@ #include "kirkwood-ts219.dtsi" #include "kirkwood-ts419.dtsi" -/ { - mbus { - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; -}; - ðphy0 { reg = <0>; }; ðphy1 { reg = <1>; }; + +&pciec { status = "okay"; }; +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 30ab93bfb1e4..02bd53762705 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -45,12 +45,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7445a15e259d..29b8bd7e0d93 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -27,7 +27,7 @@ i2c0 = &i2c0; }; - mbus { + mbus@f1000000 { compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 053a1f54f4bb..fdb736c82045 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -195,13 +195,19 @@ clocks = <&ccu1 CLK_CPU_CREG>; resets = <&rgu 5>; - usb0_otg_phy: phy@004 { + creg_clk: clock-controller { + compatible = "nxp,lpc1850-creg-clk"; + clocks = <&xtal32>; + #clock-cells = <1>; + }; + + usb0_otg_phy: phy { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; - dmamux: dma-mux@11c { + dmamux: dma-mux { compatible = "nxp,lpc1850-dmamux"; #dma-cells = <3>; dma-requests = <64>; @@ -209,11 +215,19 @@ }; }; + rtc: rtc@40046000 { + compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + interrupts = <47>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; + }; + cgu: clock-controller@40050000 { compatible = "nxp,lpc1850-cgu"; reg = <0x40050000 0x1000>; #clock-cells = <1>; - clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; }; ccu1: clock-controller@40051000 { @@ -430,6 +444,15 @@ status = "disabled"; }; + dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + resets = <&rgu 42>; + status = "disabled"; + }; + can0: can@400e2000 { compatible = "bosch,c_can"; reg = <0x400e2000 0x1000>; @@ -439,6 +462,24 @@ status = "disabled"; }; + adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + resets = <&rgu 40>; + status = "disabled"; + }; + + adc1: adc@400e4000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e4000 0x1000>; + interrupts = <21>; + clocks = <&ccu1 CLK_APB3_ADC1>; + resets = <&rgu 41>; + status = "disabled"; + }; + gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; reg = <0x400f4000 0x4000>; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 022d495432c1..6c9048d4d03c 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -45,50 +45,50 @@ poll-interval = <100>; autorepeat; - button@0 { + button0 { label = "joy:right"; linux,code = <KEY_RIGHT>; gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; }; - button@1 { + button1 { label = "joy:up"; linux,code = <KEY_UP>; gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; }; - button@2 { + button2 { label = "joy:enter"; linux,code = <KEY_ENTER>; gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; }; - button@3 { + button3 { label = "joy:left"; linux,code = <KEY_LEFT>; gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; }; - button@4 { + button4 { label = "joy:down"; linux,code = <KEY_DOWN>; gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; }; - button@5 { + button5 { label = "user:sw3"; linux,code = <KEY_F1>; gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; }; - button@6 { + button6 { label = "user:sw4"; linux,code = <KEY_F2>; gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; }; - button@7 { + button7 { label = "user:sw5"; linux,code = <KEY_F3>; gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; @@ -119,9 +119,25 @@ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; }; }; + + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "3v3io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &pinctrl { + adc1_pins: adc1-pins { + adc1_pins_cfg { + pins = "pf_9"; + function = "adc"; + input-disable; + bias-disable; + }; + }; + emc_pins: emc-pins { emc_addr0_23_cfg { pins = "p2_9", "p2_10", "p2_11", "p2_12", @@ -325,6 +341,13 @@ }; }; +&adc1 { + status = "okay"; + vref-supply = <&vcc>; + pinctrl-names = "default"; + pinctrl-0 = <&adc1_pins>; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -430,7 +453,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash@0 { + flash { compatible = "jedec,spi-nor"; spi-rx-bus-width = <4>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 079d3cf8c00b..1919be4dab2b 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -38,6 +38,13 @@ reg = <0x28000000 0x2000000>; /* 32 MB */ }; + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "3v3-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + /* vmmc is controlled by sdmmc host internally */ vmmc: vmmc_fixed { compatible = "regulator-fixed"; @@ -55,31 +62,31 @@ poll-interval = <100>; autorepeat; - button@0 { + button0 { label = "joy_enter"; linux,code = <KEY_ENTER>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; - button@1 { + button1 { label = "joy_left"; linux,code = <KEY_LEFT>; gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; }; - button@2 { + button2 { label = "joy_up"; linux,code = <KEY_UP>; gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; }; - button@3 { + button3 { label = "joy_right"; linux,code = <KEY_RIGHT>; gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; }; - button@4 { + button4 { label = "joy_down"; linux,code = <KEY_DOWN>; gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; @@ -461,6 +468,11 @@ }; }; +&adc0 { + status = "okay"; + vref-supply = <&vcc>; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; @@ -483,6 +495,11 @@ }; }; +&dac { + status = "okay"; + vref-supply = <&vcc>; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -567,7 +584,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash@0 { + flash { compatible = "jedec,spi-nor"; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts new file mode 100644 index 000000000000..1a672b098d0b --- /dev/null +++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts @@ -0,0 +1,127 @@ +/* + * Device Tree file for Buffalo/Revogear Kurobox Pro + * + * Copyright (C) 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c + * Copyright (C) Ronen Shitrit <rshitrit@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo/Revogear Kurobox Pro"; + compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>, + <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>; + }; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; +}; + +&devbus_cs0 { + status = "okay"; + compatible = "marvell,orion-nand"; + reg = <MBUS_ID(0x01, 0x1e) 0 0x400>; + cle = <0>; + ale = <1>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uImage@0 { /* 4 MB */ + reg = <0 0x400000>; + read-only; + }; + + rootfs@400000 { /* 64 MB */ + reg = <0x400000 0x4000000>; + read-only; + }; + + extra@4400000 { /* 188 MB */ + reg = <0x4400000 0xBC00000>; + read-only; + }; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + +&sata { + nr-ports = <2>; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 89e46ebef1bc..e8e2a5d71976 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -37,46 +37,41 @@ #size-cells = <1>; /* External clocks */ - extal_clk: extal_clk { + extal_clk: extal { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "extal"; }; - usb_x1_clk: usb_x1_clk { + usb_x1_clk: usb_x1 { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "usb_x1"; }; /* Fixed factor clocks */ - b_clk: b_clk { + b_clk: b { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <3>; - clock-output-names = "b"; }; - p1_clk: p1_clk { + p1_clk: p1 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <6>; - clock-output-names = "p1"; }; - p0_clk: p0_clk { + p0_clk: p0 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <12>; - clock-output-names = "p0"; }; /* Special CPG clocks */ diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 590257095700..93ace33e3e36 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -189,28 +189,28 @@ &pfc { scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; + groups = "scifa0_data"; + function = "scifa0"; }; mmc0_pins: mmc { - renesas,groups = "mmc0_data8", "mmc0_ctrl"; - renesas,function = "mmc0"; + groups = "mmc0_data8", "mmc0_ctrl"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; keyboard_pins: keyboard { - renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327", - "PORT328", "PORT329"; + pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328", + "PORT329"; bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6583a1dfca1f..6954912a3753 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -486,37 +486,32 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "extal2"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -540,171 +535,151 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150074 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615007c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150008 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615000c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615001c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; - vclk4_clk: vclk4_clk@e6150014 { + vclk4_clk: vclk4@e6150014 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150014 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk4"; }; - vclk5_clk: vclk5_clk@e6150034 { + vclk5_clk: vclk5@e6150034 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150034 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk5"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150018 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsiack_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150090 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsibck_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - mp_clk: mp_clk@e6150080 { + mp_clk: mp@e6150080 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150080 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mp"; }; - m4_clk: m4_clk@e6150098 { + m4_clk: m4@e6150098 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150098 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>; #clock-cells = <0>; - clock-output-names = "m4"; }; - hsi_clk: hsi_clk@e615026c { + hsi_clk: hsi@e615026c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150094 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll0_div2_clk: pll0_div2_clk { + pll0_div2_clk: pll0_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL0>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll0_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index c548cabb102f..2c82dab2b6f4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -228,44 +228,44 @@ pinctrl-names = "default"; ether_pins: ether { - renesas,groups = "gether_mii", "gether_int"; - renesas,function = "gether"; + groups = "gether_mii", "gether_int"; + function = "gether"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; st1232_pins: touchscreen { - renesas,groups = "intc_irq10"; - renesas,function = "intc"; + groups = "intc_irq10"; + function = "intc"; }; backlight_pins: backlight { - renesas,groups = "tpu0_to2_1"; - renesas,function = "tpu0"; + groups = "tpu0_to2_1"; + function = "tpu0"; }; mmc0_pins: mmc0 { - renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; - renesas,function = "mmc0"; + groups = "mmc0_data8_1", "mmc0_ctrl_1"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + function = "sdhi0"; }; fsia_pins: sounda { - renesas,groups = "fsia_sclk_in", "fsia_mclk_out", - "fsia_data_in_1", "fsia_data_out_0"; - renesas,function = "fsia"; + groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + function = "fsia"; }; lcd0_pins: lcd0 { - renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; - renesas,function = "lcd0"; + groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + function = "lcd0"; /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 995fbda74b7a..39b2f88ad151 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -422,53 +422,45 @@ ranges; /* External root clock */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal2"; }; - dv_clk: dv_clk { + dv_clk: dv { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; - clock-output-names = "dv"; }; - fmsick_clk: fmsick_clk { + fmsick_clk: fmsick { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsick"; }; - fmsock_clk: fmsock_clk { + fmsock_clk: fmsock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsock"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -486,7 +478,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -494,9 +486,8 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -504,77 +495,67 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - fmsi_clk: fmsi_clk@e6150010 { + fmsi_clk: fmsi@e6150010 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150010 4>; clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmsi"; }; - fmso_clk: fmso_clk@e6150014 { + fmso_clk: fmso@e6150014 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmso"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spu_clk: spu_clk@e6150084 { + spu_clk: spu@e6150084 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "spu"; }; - vou_clk: vou_clk@e6150088 { + vou_clk: vou@e6150088 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>, <0>; #clock-cells = <0>; - clock-output-names = "vou"; }; - stpro_clk: stpro_clk@e615009c { + stpro_clk: stpro@e615009c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&cpg_clocks R8A7740_CLK_PLLC0>; #clock-cells = <0>; - clock-output-names = "stpro"; }; /* Fixed factor clocks */ - pllc1_div2_clk: pllc1_div2_clk { + pllc1_div2_clk: pllc1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7740_CLK_PLLC1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pllc1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 21e3b9dda2da..e0dab1464648 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -130,53 +130,53 @@ pinctrl-names = "default"; scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; + groups = "scif0_data_a", "scif0_ctrl"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi0_pup_pins: sd0_pup { - renesas,groups = "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; bias-pull-up; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; + groups = "hspi0_a"; + function = "hspi0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index f83a348fc07a..99c10ebbaca2 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -443,11 +443,10 @@ ranges; /* External input clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -474,59 +473,51 @@ audio_clk_a: audio_clk_a { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_c"; }; /* Fixed ratio clocks */ - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "g"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s4"; }; - z_clk: z_clk { + z_clk: z { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLB>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "z"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index e111d35d02ae..b795da6f5503 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -170,49 +170,49 @@ du_pins: du { du0 { - renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; - renesas,function = "du0"; + groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + function = "du0"; }; du1 { - renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; - renesas,function = "du1"; + groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; + function = "du1"; }; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk_b"; - renesas,function = "scif_clk"; + groups = "scif_clk_b"; + function = "scif_clk"; }; ethernet_pins: ethernet { intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; + groups = "intc_irq1_b"; + function = "intc"; }; lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; + groups = "lbsc_ex_cs0"; + function = "lbsc"; }; }; scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; + groups = "scif2_data_c"; + function = "scif2"; }; scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; + groups = "scif4_data"; + function = "scif4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; + groups = "hspi0"; + function = "hspi0"; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index a0cc08e6295b..60bc1e66bba9 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -445,12 +445,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -474,37 +473,33 @@ }; /* Fixed factor clocks */ - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <16>; clock-mult = <1>; - clock-output-names = "s4"; }; - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "g"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aa6ca92a9485..823a119cb1b4 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -176,11 +176,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -314,119 +313,119 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data"; - renesas,function = "scif0"; + groups = "scif0_data"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; mmc1_pins: mmc1 { - renesas,groups = "mmc1_data8", "mmc1_ctrl"; - renesas,function = "mmc1"; + groups = "mmc1_data8", "mmc1_ctrl"; + function = "mmc1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof1_pins: spi2 { - renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; - renesas,function = "msiof1"; + function = "msiof1"; }; i2c0_pins: i2c0 { - renesas,groups = "i2c0"; - renesas,function = "i2c0"; + groups = "i2c0"; + function = "i2c0"; }; iic0_pins: iic0 { - renesas,groups = "iic0"; - renesas,function = "iic0"; + groups = "iic0"; + function = "iic0"; }; iic1_pins: iic1 { - renesas,groups = "iic1"; - renesas,function = "iic1"; + groups = "iic1"; + function = "iic1"; }; iic2_pins: iic2 { - renesas,groups = "iic2"; - renesas,function = "iic2"; + groups = "iic2"; + function = "iic2"; }; iic3_pins: iic3 { - renesas,groups = "iic3"; - renesas,function = "iic3"; + groups = "iic3"; + function = "iic3"; }; hsusb_pins: hsusb { - renesas,groups = "usb0_ovc_vbus"; - renesas,function = "usb0"; + groups = "usb0_ovc_vbus"; + function = "usb0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; usb2_pins: usb2 { - renesas,groups = "usb2"; - renesas,function = "usb2"; + groups = "usb2"; + function = "usb2"; }; vin1_pins: vin { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 38b706399a6b..283698fc0fea 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1003,20 +1003,18 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; - clock-output-names = "pcie_bus"; status = "disabled"; }; @@ -1028,19 +1026,16 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External SCIF clock */ @@ -1053,11 +1048,10 @@ }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1066,7 +1060,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; status = "disabled"; }; @@ -1084,201 +1077,176 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - z2_clk: z2_clk { + z2_clk: z2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "z2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - imp_clk: imp_clk { + imp_clk: imp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "imp"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b81d3a2..1adf8770db7e 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,11 +242,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -324,89 +323,89 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof0_pins: spi1 { - renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; - renesas,function = "msiof0"; + function = "msiof0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314427d6..9554d13362f6 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -113,11 +113,10 @@ clock-frequency = <74250000>; }; - x14_clk: x14-clock { + x14_clk: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; sound { @@ -147,78 +146,78 @@ pinctrl-names = "default"; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; can0_pins: can0 { - renesas,groups = "can0_data"; - renesas,function = "can0"; + groups = "can0_data"; + function = "can0"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; ssi_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; audio_clk_pins: audio_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f0569fe2..8010d935300f 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1048,12 +1048,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -1064,27 +1063,23 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; - clock-output-names = "pcie_bus"; status = "disabled"; }; @@ -1098,11 +1093,10 @@ }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1111,7 +1105,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; status = "disabled"; }; @@ -1129,178 +1122,156 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 87e89ec9dd47..3cd1c804621f 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,11 +158,10 @@ }; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -240,53 +239,53 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index b48215945241..95bbed95b0c1 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -812,12 +812,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -828,19 +827,16 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External SCIF clock */ @@ -866,111 +862,98 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <5>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index ca9bc4fff287..383ad791f1db 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -107,38 +107,38 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; - renesas,function = "du"; + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; + function = "du"; }; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; }; @@ -148,8 +148,8 @@ &pfc { qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 66f077a3ca41..56d98d5b2185 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -130,58 +130,58 @@ pinctrl-names = "default"; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; mmcif0_pins: mmcif0 { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eacb2b291361..7d7d18766540 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -836,12 +836,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -865,173 +864,152 @@ #power-domain-cells = <0>; }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cp"; }; - acp_clk: acp_clk { + acp_clk: acp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "acp"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index b3d6ec87f615..8db9e9b197a2 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -45,6 +45,11 @@ / { model = "Rockchip RK3036 Evaluation board"; compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; }; &emac { diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 6251d109eff4..1df1557a46c3 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,11 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + memory { + device_type = "memory"; + reg = <0x60000000 0x20000000>; + }; + leds: gpio-leds { compatible = "gpio-leds"; @@ -130,6 +135,10 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; @@ -341,7 +350,6 @@ &sdio { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; @@ -385,6 +393,14 @@ status = "okay"; }; +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + &pinctrl { leds { led_ctl: led-ctl { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d0f4bb7e1e50..843d2be2e4e9 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -63,11 +63,6 @@ spi = &spi; }; - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -119,6 +114,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -149,6 +149,36 @@ }; }; + vop: vop@10118000 { + compatible = "rockchip,rk3036-vop"; + reg = <0x10118000 0x19c>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + + vop_mmu: iommu@10118300 { + compatible = "rockchip,iommu"; + reg = <0x10118300 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vop_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@10139000 { compatible = "arm,gic-400"; interrupt-controller; @@ -237,7 +267,6 @@ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - broken-cd; bus-width = <8>; cap-mmc-highspeed; clock-frequency = <37500000>; @@ -297,6 +326,27 @@ status = "disabled"; }; + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + status = "disabled"; + + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + timer: timer@20044000 { compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -644,6 +694,15 @@ }; }; + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, + <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 6d2a5b3a84a8..bc674ee206ec 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -77,21 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; debounce-interval = <100>; }; - button@1 { + volume-down { gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ - linux,code = <104>; + linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; debounce-interval = <100>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 05533005a809..6e7f2187a0e3 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -61,14 +62,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -182,7 +181,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -348,7 +346,6 @@ }; &mmc1 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index cb0a552e0b18..c0ba86c3a2ab 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -169,7 +169,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -207,7 +207,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@17c { #phy-cells = <0>; reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; @@ -215,7 +215,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@188 { #phy-cells = <0>; reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 0b6924c97b6b..1da46d138029 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3188.dtsi" / { @@ -54,13 +55,11 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 9271833958f9..31f81b265cef 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -154,7 +154,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -166,7 +166,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@10c { #phy-cells = <0>; reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; @@ -174,7 +174,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@11c { #phy-cells = <0>; reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index e3898b810150..5956e8246abe 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -53,7 +53,6 @@ }; &emmc { - broken-cd; cap-mmc-highspeed; mmc-ddr-1_8v; disable-wp; @@ -61,6 +60,13 @@ status = "okay"; }; +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 4dae42a01509..f9c34124ccc3 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> +#include <dt-bindings/thermal/thermal.h> #include "skeleton.dtsi" / { @@ -69,6 +70,7 @@ /* KHz uV */ 816000 1000000 >; + #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -247,6 +249,63 @@ assigned-clock-rates = <594000000>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@11150000 { + compatible = "rockchip,rk3228-tsadc"; + reg = <0x11150000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <0>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { compatible = "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; @@ -394,6 +453,16 @@ }; }; + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 78d47f7d2938..963365d12208 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -38,6 +38,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -98,16 +99,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -172,7 +171,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 98c586a43c73..d6cf9ada13c9 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -87,14 +88,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -208,7 +207,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -509,7 +507,6 @@ }; &sdio0 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 2ff9689d2e1b..720717bb3614 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -41,7 +41,7 @@ */ /dts-v1/; - +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -62,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -162,7 +160,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 510a1d0d7abb..4b8a8adb243c 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -61,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 610769d99522..2958c36d12a0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -54,6 +54,50 @@ i2c20 = &i2c_tunnel; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + pwm-delay-us = <10000>; + }; + gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -62,6 +106,21 @@ pinctrl-0 = <&ac_present_ap>; }; + panel: panel { + compatible ="innolux,n116bge", "simple-panel"; + status = "okay"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -103,6 +162,29 @@ }; }; +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { @@ -115,6 +197,10 @@ }; }; +&pwm0 { + status = "okay"; +}; + &rk808 { vcc11-supply = <&vcc_5v>; @@ -168,6 +254,14 @@ }; }; +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ @@ -184,6 +278,12 @@ &suspend_l_sleep >; + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index c2f52cfb4d06..3748abf562b1 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,48 @@ }; }; +&backlight { + /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ + brightness-levels = < + 0 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply = <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; @@ -142,12 +185,6 @@ }; }; - edp { - edp_hpd: edp_hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; - }; - }; - hdmi { vcc50_hdmi_en: vcc50-hdmi-en { rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 60bd6e91e308..f6b2eaaebb9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -60,6 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -87,6 +88,14 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 699beb0a9481..f72d616d1bf8 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -70,6 +70,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -86,6 +87,44 @@ }; }; +&backlight { + /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = < + 0 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + &emmc { /delete-property/mmc-hs200-1_8v; }; @@ -135,6 +174,11 @@ }; }; +&panel { + compatible = "auo,b101ean01", "simple-panel"; + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 94b56e33d947..d44351ec2333 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -65,6 +65,13 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index b34a7b5b3f62..a0d033f6fe52 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,10 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + &cpu_alert0 { temperature = <65000>; }; @@ -96,6 +101,17 @@ temperature = <70000>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 412809c60d01..b2557bf5a58f 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -141,12 +141,27 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; + operating-points = < + /* KHz uV */ + 1800000 1400000 + 1704000 1350000 + 1608000 1300000 + 1512000 1250000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 216000 900000 + 126000 900000 + >; }; &emmc { status = "okay"; - broken-cd; bus-width = <8>; cap-mmc-highspeed; rockchip,default-sample-phase = <158>; @@ -347,7 +362,6 @@ &sdio0 { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 31f7e20ef418..3071e94e86ed 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -201,6 +201,15 @@ #clock-cells = <0>; }; + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + rockchip,grf = <&grf>; + #phy-cells = <0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -659,7 +668,7 @@ * *_HDMI HDMI * *_MIPI_* MIPI */ - pd_vio { + pd_vio@RK3288_PD_VIO { reg = <RK3288_PD_VIO>; clocks = <&cru ACLK_IEP>, <&cru ACLK_ISP>, @@ -692,7 +701,7 @@ * Note: The following 3 are HEVC(H.265) clocks, * and on the ACLK_HEVC_NIU (NOC). */ - pd_hevc { + pd_hevc@RK3288_PD_HEVC { reg = <RK3288_PD_HEVC>; clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, @@ -704,7 +713,7 @@ * (video endecoder & decoder) clocks that on the * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). */ - pd_video { + pd_video@RK3288_PD_VIDEO { reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; @@ -714,7 +723,7 @@ * Note: ACLK_GPU is the GPU clock, * and on the ACLK_GPU_NIU (NOC). */ - pd_gpu { + pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; }; @@ -765,7 +774,7 @@ clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; dmas = <&dmac_bus_s 3>; dma-names = "tx"; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spdif_tx>; rockchip,grf = <&grf>; @@ -775,7 +784,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; @@ -821,6 +830,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + + vopb_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopb>; + }; + vopb_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopb>; @@ -858,6 +873,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + vopl_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopl>; @@ -878,19 +899,16 @@ mipi_dsi: mipi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0xff960000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; clock-names = "ref", "pclk"; + power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - mipi_in: port { #address-cells = <1>; #size-cells = <0>; @@ -906,6 +924,38 @@ }; }; + edp: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&edp_phy>; + phy-names = "dp"; + resets = <&cru SRST_EDP>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -966,7 +1016,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@320 { #phy-cells = <0>; reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; @@ -974,7 +1024,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@334 { #phy-cells = <0>; reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; @@ -982,7 +1032,7 @@ #clock-cells = <0>; }; - usbphy2: usb-phy2 { + usbphy2: usb-phy@348 { #phy-cells = <0>; reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; @@ -1158,6 +1208,12 @@ }; }; + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 54fcc3fc82e2..9eb6aff3e38f 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -197,7 +197,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 800x480@60Hz */ clock-frequency = <24373920>; hactive = <800>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 78996bdbd3df..12cc1d34097d 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -319,6 +319,32 @@ #size-cells = <1>; ranges; + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d2-hlcdc"; + reg = <0xf0000000 0x2000>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; @@ -973,6 +999,11 @@ status = "disabled"; }; + sfr: sfr@f8030000 { + compatible = "atmel,sama5d2-sfr", "syscon"; + reg = <0xf8030000 0x98>; + }; + flx0: flexcom@f8034000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8034000 0x200>; @@ -1193,6 +1224,11 @@ clock-names = "tdes_clk"; status = "okay"; }; + + chipid@fc069000 { + compatible = "atmel,sama5d2-chipid"; + reg = <0xfc069000 0x8>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index aa8bae3b8fcf..e40a2f23b6cd 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -329,41 +329,41 @@ &pfc { i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; + groups = "i2c3_1"; + function = "i2c3"; }; mmcif_pins: mmc { mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; + groups = "mmc0_data8_0", "mmc0_ctrl_0"; + function = "mmc0"; }; cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; + groups = "mmc0_data8_0"; + pins = "PORT279"; bias-pull-up; }; }; scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; + groups = "scifa4_data", "scifa4_ctrl"; + function = "scifa4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; + groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + function = "fsia"; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index bf825ca4f6f7..639ea2d76970 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -602,39 +602,33 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extal2"; }; - extcki_clk: extcki_clk { + extcki_clk: extcki { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extcki"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -650,7 +644,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -658,9 +652,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -668,9 +661,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615001c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -678,7 +670,6 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; zb_clk: zb_clk@e6150010 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; @@ -688,168 +679,148 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - flctl_clk: flctl_clk@e6150014 { + flctl_clk: flctlck@e6150014 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "flctlck"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150074 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150078 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsiack_clk>, <&fsiack_clk>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150090 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsibck_clk>, <&fsibck_clk>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spua_clk: spua_clk@e6150084 { + spua_clk: spua@e6150084 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spua"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150094 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; - msu_clk: msu_clk@e6150088 { + msu_clk: msu@e6150088 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "msu"; }; - hsi_clk: hsi_clk@e615008c { + hsi_clk: hsi@e615008c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615008c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div7_clk>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - mfg1_clk: mfg1_clk@e6150098 { + mfg1_clk: mfg1@e6150098 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150098 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg1"; }; - mfg2_clk: mfg2_clk@e615009c { + mfg2_clk: mfg2@e615009c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg2"; }; - dsit_clk: dsit_clk@e6150060 { + dsit_clk: dsit@e6150060 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150060 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "dsit"; }; - dsi0p_clk: dsi0p_clk@e6150064 { + dsi0p_clk: dsi0pck@e6150064 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150064 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>, <&extcki_clk>, <0>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "dsi0pck"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - pll1_div7_clk: pll1_div7_clk { + pll1_div7_clk: pll1_div7 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <7>; clock-mult = <1>; - clock-output-names = "pll1_div7"; }; - pll1_div13_clk: pll1_div13_clk { + pll1_div13_clk: pll1_div13 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <13>; clock-mult = <1>; - clock-output-names = "pll1_div13"; }; - twd_clk: twd_clk { + twd_clk: twd { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_Z>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "twd"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index b89cbde3b289..9f48141270b8 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -831,6 +831,8 @@ interrupts = <0 125 4>; clocks = <&usb_mp_clk>; clock-names = "otg"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -842,6 +844,8 @@ interrupts = <0 128 4>; clocks = <&usb_mp_clk>; clock-names = "otg"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 1c5e139e4d05..17e81dc9213e 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -78,10 +78,13 @@ <0 87 IRQ_TYPE_LEVEL_HIGH>, <0 88 IRQ_TYPE_LEVEL_HIGH>, <0 89 IRQ_TYPE_LEVEL_HIGH>, - <0 90 IRQ_TYPE_LEVEL_HIGH>; + <0 90 IRQ_TYPE_LEVEL_HIGH>, + <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + clocks = <&l4_main_clk>; + clock-names = "apb_pclk"; }; }; @@ -362,6 +365,7 @@ compatible = "altr,socfpga-a10-gate-clk"; clocks = <&sdmmc_free_clk>; clk-gate = <0xC8 5>; + clk-phase = <0 135>; }; qspi_clk: qspi_clk { @@ -589,7 +593,7 @@ reg = <0xff808000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; - clocks = <&l4_mp_clk>, <&sdmmc_free_clk>; + clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; status = "disabled"; }; @@ -599,6 +603,26 @@ reg = <0xffe00000 0x40000>; }; + eccmgr: eccmgr@ffd06000 { + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 IRQ_TYPE_LEVEL_HIGH>; + ranges; + + l2-ecc@ffd06010 { + compatible = "altr,socfpga-a10-l2-ecc"; + reg = <0xffd06010 0x4>; + }; + + ocram-ecc@ff8c3000 { + compatible = "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8c3000 0x400>; + }; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; @@ -689,6 +713,8 @@ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk>; clock-names = "otg"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -700,6 +726,8 @@ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk>; clock-names = "otg"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index dbbb751ac1ba..8a7dfa473e98 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -21,6 +21,7 @@ &mmc { status = "okay"; num-slots = <1>; + cap-sd-highspeed; broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 06db951e06f8..a05e3df23103 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -38,12 +38,6 @@ cap-sd-highspeed; }; - ethernet@ff702000 { - phy-mode = "rgmii"; - phy-addr = <0xffffffff>; /* probe for phy addr */ - status = "okay"; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index b61f22f9ac9f..02e22f554ef0 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -39,6 +39,90 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:blue:led0"; + gpios = <&portb 24 0>; /* HPS_GPIO53 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led1 { + label = "hps:blue:led1"; + gpios = <&portb 25 0>; /* HPS_GPIO54 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led2 { + label = "hps:blue:led2"; + gpios = <&portb 26 0>; /* HPS_GPIO55 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led3 { + label = "hps:blue:led3"; + gpios = <&portb 27 0>; /* HPS_GPIO56 */ + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + hps_sw0 { + label = "hps_sw0"; + gpios = <&portc 20 0>; /* HPS_GPI7 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0>; /* SW_LID */ + }; + + hps_sw1 { + label = "hps_sw1"; + gpios = <&portc 19 0>; /* HPS_GPI6 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x5>; /* SW_DOCK */ + }; + + hps_sw2 { + label = "hps_sw2"; + gpios = <&portc 18 0>; /* HPS_GPI5 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0xa>; /* SW_KEYPAD_SLIDE */ + }; + + hps_sw3 { + label = "hps_sw3"; + gpios = <&portc 17 0>; /* HPS_GPI4 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0xc>; /* SW_ROTATE_LOCK */ + }; + + hps_hkey0 { + label = "hps_hkey0"; + gpios = <&portc 21 1>; /* HPS_GPI8 */ + linux,code = <187>; /* KEY_F17 */ + }; + + hps_hkey1 { + label = "hps_hkey1"; + gpios = <&portc 22 1>; /* HPS_GPI9 */ + linux,code = <188>; /* KEY_F18 */ + }; + + hps_hkey2 { + label = "hps_hkey2"; + gpios = <&portc 23 1>; /* HPS_GPI10 */ + linux,code = <189>; /* KEY_F19 */ + }; + + hps_hkey3 { + label = "hps_hkey3"; + gpios = <&portc 24 1>; /* HPS_GPI11 */ + linux,code = <190>; /* KEY_F20 */ + }; + }; + regulator_3_3v: vcc3p3-regulator { compatible = "regulator-fixed"; regulator-name = "VCC3P3"; @@ -61,7 +145,15 @@ rxc-skew-ps = <2000>; }; -&gpio2 { +&gpio0 { /* GPIO 0..29 */ + status = "okay"; +}; + +&gpio1 { /* GPIO 30..57 */ + status = "okay"; +}; + +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */ status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 019dd2fea208..e1a61f20873f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -36,6 +36,7 @@ }; &gmac1 { + phy-mode = "rgmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 4a21c6492dbb..d35aa88791ad 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -57,8 +57,15 @@ }; }; }; + lis3lv02dl { + lis3lv02dl_nhk_mode: lis3lv02dl_nhk { + nhk_cfg1 { + pins = "GPIO82_C10"; // IRQ line + ste,input = <0>; + }; + }; + }; }; - src@101e0000 { /* These chrystal outputs are not used on this board */ disable-sxtalo; @@ -86,6 +93,10 @@ lis3lv02dl@1d { /* Accelerometer */ compatible = "st,lis3lv02dl-accel"; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82 + pinctrl-0 = <&lis3lv02dl_nhk_mode>; + pinctrl-names = "default"; reg = <0x1d>; }; stmpe0: stmpe2401@43 { diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index e2be53343064..d2d532a9d783 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -748,6 +748,9 @@ clocks = <&uart0clk>, <&pclkuart0>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; + dmas = <&dmac0 14 1>, + <&dmac0 15 1>; + dma-names = "rx", "tx"; }; uart1: uart@101fb000 { @@ -759,6 +762,9 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart1_default_mux>; + dmas = <&dmac1 22 1>, + <&dmac1 23 1>; + dma-names = "rx", "tx"; }; uart2: uart@101f2000 { @@ -769,6 +775,9 @@ clocks = <&uart2clk>, <&pclkuart2>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; + dmas = <&dmac1 30 1>, + <&dmac1 31 1>; + dma-names = "rx", "tx"; }; rng: rng@101b0000 { @@ -813,5 +822,34 @@ pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; }; + + dmac0: dma-controller@10130000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <15>; + clocks = <&hclkdma0>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; + dmac1: dma-controller@10150000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10150000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <13>; + clocks = <&hclkdma1>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 8b7aa0dcdc6e..c970bf65c74c 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -18,6 +18,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x40000000>; }; @@ -1164,7 +1168,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; volume_down { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 38acf78d7815..9d868af97b8e 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1047,7 +1047,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index f91c2c9b2f94..89047edb5c5f 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -292,7 +292,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; volume_down { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index d845bd1448b5..cb9393a53422 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -150,7 +150,7 @@ }; timer@60005000 { - compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -256,7 +256,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". */ uarta: serial@70006000 { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 66b4451eb2ca..a99f07ad6312 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -12,7 +12,15 @@ aliases { rtc0 = "/i2c@0,7000d000/pmic@40"; rtc1 = "/rtc@0,7000e000"; + + /* This order keeps the mapping DB9 connector <-> ttyS0 */ serial0 = &uartd; + serial1 = &uarta; + serial2 = &uartb; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory { @@ -1367,6 +1375,28 @@ }; }; + /* + * First high speed UART, exposed on the expansion connector J3A2 + * Pin 41: BR_UART1_TXD + * Pin 44: BR_UART1_RXD + */ + serial@70006000 { + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + /* + * Second high speed UART, exposed on the expansion connector J3A2 + * Pin 65: UART2_RXD + * Pin 68: UART2_TXD + * Pin 71: UART2_CTS_L + * Pin 74: UART2_RTS_L + */ + serial@70006040 { + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; + status = "okay"; + }; + /* DB9 serial port */ serial@0,70006300 { status = "okay"; @@ -1761,7 +1791,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index ec1aa64ded68..5f1fc1410bd0 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -8,6 +8,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -509,7 +513,7 @@ linux,input-type = <5>; linux,code = <KEY_RESERVED>; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; power { @@ -517,7 +521,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <30>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index cfbdf429b45d..0318258dde3e 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -975,7 +979,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 68669f791c8b..e4eac1f01e64 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -208,7 +208,7 @@ }; timer@0,60005000 { - compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -322,7 +322,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ uarta: serial@0,70006000 { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index b926a07b9443..d2e960cbc001 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -655,7 +659,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 1dd7d7bfdfcc..bb56dfe9e10c 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -11,6 +11,10 @@ serial1 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + host1x@50000000 { hdmi@54280000 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 9b87526ab0b7..34c6588e92ef 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -10,6 +10,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + pwm@7000a000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ed7e1009326c..33ed2b23026b 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -14,6 +14,10 @@ serial1 = &uartc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -521,7 +525,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index aea8994b35f2..94b60a710dd8 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -807,7 +811,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid { @@ -816,7 +820,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 13d4e6185275..025e9e8037da 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -10,6 +10,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index d99af4ef9c64..4a035f74043a 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -392,7 +396,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 04c58e9ca490..a28c060a839b 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -601,7 +605,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 340d81108df1..073806d07b2b 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -508,7 +512,7 @@ nvidia,repeat-delay-ms = <160>; nvidia,kbc-row-pins = <0 1 2>; nvidia,kbc-col-pins = <16 17>; - nvidia,wakeup-source; + wakeup-source; linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER) MATRIX_KEY(0x01, 0x00, KEY_HOME) MATRIX_KEY(0x01, 0x01, KEY_BACK) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 33173e1bace9..2207c08e3fa3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,7 +145,7 @@ interrupt-parent = <&intc>; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&tegra_car TEGRA20_CLK_TWD>; }; @@ -309,7 +309,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra20-uart" and to enable the APB DMA based serial - * driver, the comptible is "nvidia,tegra20-hsuart". + * driver, the compatible is "nvidia,tegra20-hsuart". */ uarta: serial@70006000 { compatible = "nvidia,tegra20-uart"; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index f2879cfcca62..99a69457dbf5 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -17,6 +17,10 @@ serial3 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + pcie-controller@00003000 { status = "okay"; @@ -196,7 +200,7 @@ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 3dede3934446..1eca3b28ac64 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -12,6 +12,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x7ff00000>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index bb1ca158273c..4721c1c9c780 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -35,6 +35,10 @@ serial1 = &uartc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x40000000>; }; @@ -626,7 +630,7 @@ interrupts = <2 0>; linux,code = <KEY_POWER>; debounce-interval = <100>; - gpio-key,wakeup; + wakeup-source; }; volume-down { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 3ff019f47d00..76875c3160fe 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -15,6 +15,10 @@ serial2 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + host1x@50000000 { dc@54200000 { rgb { @@ -142,7 +146,7 @@ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 313e260529a3..5030065cbdfe 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -230,7 +230,7 @@ reg = <0x50040600 0x20>; interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; clocks = <&tegra_car TEGRA30_CLK_TWD>; }; @@ -371,7 +371,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". */ uarta: serial@70006000 { |
