diff options
Diffstat (limited to 'arch/arm/boot/dts/href.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/href.dtsi | 61 |
1 files changed, 44 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index c0bc426952ea..9db41b9d8358 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "dbx5x0.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include "dbx5x0.dtsi" / { memory { @@ -27,7 +28,7 @@ }; }; - soc-u9500 { + soc { uart@80120000 { status = "okay"; }; @@ -45,14 +46,14 @@ compatible = "tc3589x"; reg = <0x42>; interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -63,17 +64,43 @@ }; i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; + lp5521@33 { + compatible = "national,lp5521"; reg = <0x33>; + label = "lp5521_pri"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - lp5521@0x34 { - compatible = "lp5521"; + lp5521@34 { + compatible = "national,lp5521"; reg = <0x34>; + label = "lp5521_sec"; + clock-mode = /bits/ 8 <2>; + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; }; - - bh1780@0x29 { + bh1780@29 { compatible = "rohm,bh1780gli"; reg = <0x33>; }; @@ -82,7 +109,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -97,7 +124,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -106,7 +133,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -116,7 +143,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; @@ -236,7 +263,7 @@ regulator-name = "V-MMC-SD"; }; - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { regulator-name = "V-INTCORE"; }; @@ -256,7 +283,7 @@ regulator-name = "V-AMIC1"; }; - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { regulator-name = "V-AMIC2"; }; |
