diff options
Diffstat (limited to 'Documentation')
110 files changed, 2486 insertions, 851 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index bf1627b02a03..aba7d989208c 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -43,7 +43,7 @@ Date: September 2008 Contact: Badari Pulavarty <pbadari@us.ibm.com> Description: The file /sys/devices/system/memory/memoryX/state - is read-write. When read, it's contents show the + is read-write. When read, its contents show the online/offline state of the memory section. When written, root can toggle the the online/offline state of a removable memory section (see removable file description above) diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt index 52618ab069ad..2e435adfbd6b 100644 --- a/Documentation/DMA-API-HOWTO.txt +++ b/Documentation/DMA-API-HOWTO.txt @@ -742,7 +742,7 @@ failure can be determined by: Closing -This document, and the API itself, would not be in it's current +This document, and the API itself, would not be in its current form without the feedback and suggestions from numerous individuals. We would like to specifically mention, in no particular order, the following people: diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ff3e5bec1c24..8c5411cfeaf0 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *); </programlisting> <para> - Called from ata_bus_probe() and ata_bus_reset() error paths, - as well as when unregistering from the SCSI module (rmmod, hot - unplug). + Called from ata_bus_probe() error path, as well as when + unregistering from the SCSI module (rmmod, hot unplug). This function should do whatever needs to be done to take the port out of use. In most cases, ata_port_disable() can be used as this hook. </para> <para> Called from ata_bus_probe() on a failed probe. - Called from ata_bus_reset() on a failed bus reset. Called from ata_scsi_release(). </para> @@ -227,6 +225,18 @@ u8 (*sff_check_altstatus)(struct ata_port *ap); </sect2> + <sect2><title>Write specific ATA shadow register</title> + <programlisting> +void (*sff_set_devctl)(struct ata_port *ap, u8 ctl); + </programlisting> + + <para> + Write the device control ATA shadow register to the hardware. + Most drivers don't need to define this. + </para> + + </sect2> + <sect2><title>Select ATA device on bus</title> <programlisting> void (*sff_dev_select)(struct ata_port *ap, unsigned int device); @@ -477,7 +487,7 @@ void (*host_stop) (struct ata_host_set *host_set); allocates space for a legacy IDE PRD table and returns. </para> <para> - ->port_stop() is called after ->host_stop(). It's sole function + ->port_stop() is called after ->host_stop(). Its sole function is to release DMA/memory resources, now that they are no longer actively being used. Many drivers also free driver-private data from port at this time. diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index c725cb852c54..5d4d40f429a5 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -17,6 +17,7 @@ <!ENTITY VIDIOC-DBG-G-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_G_REGISTER</constant></link>"> <!ENTITY VIDIOC-DBG-S-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_S_REGISTER</constant></link>"> <!ENTITY VIDIOC-DQBUF "<link linkend='vidioc-qbuf'><constant>VIDIOC_DQBUF</constant></link>"> +<!ENTITY VIDIOC-DQEVENT "<link linkend='vidioc-dqevent'><constant>VIDIOC_DQEVENT</constant></link>"> <!ENTITY VIDIOC-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_ENCODER_CMD</constant></link>"> <!ENTITY VIDIOC-ENUMAUDIO "<link linkend='vidioc-enumaudio'><constant>VIDIOC_ENUMAUDIO</constant></link>"> <!ENTITY VIDIOC-ENUMAUDOUT "<link linkend='vidioc-enumaudioout'><constant>VIDIOC_ENUMAUDOUT</constant></link>"> @@ -60,6 +61,7 @@ <!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>"> <!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>"> <!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>"> +<!ENTITY VIDIOC-SUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_SUBSCRIBE_EVENT</constant></link>"> <!ENTITY VIDIOC-S-AUDIO "<link linkend='vidioc-g-audio'><constant>VIDIOC_S_AUDIO</constant></link>"> <!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>"> <!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>"> @@ -83,6 +85,7 @@ <!ENTITY VIDIOC-TRY-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_TRY_ENCODER_CMD</constant></link>"> <!ENTITY VIDIOC-TRY-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_TRY_EXT_CTRLS</constant></link>"> <!ENTITY VIDIOC-TRY-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_TRY_FMT</constant></link>"> +<!ENTITY VIDIOC-UNSUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_UNSUBSCRIBE_EVENT</constant></link>"> <!-- Types --> <!ENTITY v4l2-std-id "<link linkend='v4l2-std-id'>v4l2_std_id</link>"> @@ -141,6 +144,9 @@ <!ENTITY v4l2-enc-idx "struct <link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>"> <!ENTITY v4l2-enc-idx-entry "struct <link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>"> <!ENTITY v4l2-encoder-cmd "struct <link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>"> +<!ENTITY v4l2-event "struct <link linkend='v4l2-event'>v4l2_event</link>"> +<!ENTITY v4l2-event-subscription "struct <link linkend='v4l2-event-subscription'>v4l2_event_subscription</link>"> +<!ENTITY v4l2-event-vsync "struct <link linkend='v4l2-event-vsync'>v4l2_event_vsync</link>"> <!ENTITY v4l2-ext-control "struct <link linkend='v4l2-ext-control'>v4l2_ext_control</link>"> <!ENTITY v4l2-ext-controls "struct <link linkend='v4l2-ext-controls'>v4l2_ext_controls</link>"> <!ENTITY v4l2-fmtdesc "struct <link linkend='v4l2-fmtdesc'>v4l2_fmtdesc</link>"> @@ -200,6 +206,7 @@ <!ENTITY sub-controls SYSTEM "v4l/controls.xml"> <!ENTITY sub-dev-capture SYSTEM "v4l/dev-capture.xml"> <!ENTITY sub-dev-codec SYSTEM "v4l/dev-codec.xml"> +<!ENTITY sub-dev-event SYSTEM "v4l/dev-event.xml"> <!ENTITY sub-dev-effect SYSTEM "v4l/dev-effect.xml"> <!ENTITY sub-dev-osd SYSTEM "v4l/dev-osd.xml"> <!ENTITY sub-dev-output SYSTEM "v4l/dev-output.xml"> @@ -292,6 +299,8 @@ <!ENTITY sub-v4l2grab-c SYSTEM "v4l/v4l2grab.c.xml"> <!ENTITY sub-videodev2-h SYSTEM "v4l/videodev2.h.xml"> <!ENTITY sub-v4l2 SYSTEM "v4l/v4l2.xml"> +<!ENTITY sub-dqevent SYSTEM "v4l/vidioc-dqevent.xml"> +<!ENTITY sub-subscribe-event SYSTEM "v4l/vidioc-subscribe-event.xml"> <!ENTITY sub-intro SYSTEM "dvb/intro.xml"> <!ENTITY sub-frontend SYSTEM "dvb/frontend.xml"> <!ENTITY sub-dvbproperty SYSTEM "dvb/dvbproperty.xml"> @@ -381,3 +390,5 @@ <!ENTITY reqbufs SYSTEM "v4l/vidioc-reqbufs.xml"> <!ENTITY s-hw-freq-seek SYSTEM "v4l/vidioc-s-hw-freq-seek.xml"> <!ENTITY streamon SYSTEM "v4l/vidioc-streamon.xml"> +<!ENTITY dqevent SYSTEM "v4l/vidioc-dqevent.xml"> +<!ENTITY subscribe_event SYSTEM "v4l/vidioc-subscribe-event.xml"> diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl index 0c3dc4c69dd1..d858d92cf6d9 100644 --- a/Documentation/DocBook/sh.tmpl +++ b/Documentation/DocBook/sh.tmpl @@ -19,13 +19,17 @@ </authorgroup> <copyright> - <year>2008</year> + <year>2008-2010</year> <holder>Paul Mundt</holder> </copyright> <copyright> - <year>2008</year> + <year>2008-2010</year> <holder>Renesas Technology Corp.</holder> </copyright> + <copyright> + <year>2010</year> + <holder>Renesas Electronics Corp.</holder> + </copyright> <legalnotice> <para> @@ -77,7 +81,7 @@ </chapter> <chapter id="clk"> <title>Clock Framework Extensions</title> -!Iarch/sh/include/asm/clock.h +!Iinclude/linux/sh_clk.h </chapter> <chapter id="mach"> <title>Machine Specific Interfaces</title> diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml index b9dbdf9e6d29..b42b935913cd 100644 --- a/Documentation/DocBook/v4l/compat.xml +++ b/Documentation/DocBook/v4l/compat.xml @@ -2332,15 +2332,26 @@ more information.</para> </listitem> </orderedlist> </section> - </section> + <section> + <title>V4L2 in Linux 2.6.34</title> + <orderedlist> + <listitem> + <para>Added +<constant>V4L2_CID_IRIS_ABSOLUTE</constant> and +<constant>V4L2_CID_IRIS_RELATIVE</constant> controls to the + <link linkend="camera-controls">Camera controls class</link>. + </para> + </listitem> + </orderedlist> + </section> - <section id="other"> - <title>Relation of V4L2 to other Linux multimedia APIs</title> + <section id="other"> + <title>Relation of V4L2 to other Linux multimedia APIs</title> - <section id="xvideo"> - <title>X Video Extension</title> + <section id="xvideo"> + <title>X Video Extension</title> - <para>The X Video Extension (abbreviated XVideo or just Xv) is + <para>The X Video Extension (abbreviated XVideo or just Xv) is an extension of the X Window system, implemented for example by the XFree86 project. Its scope is similar to V4L2, an API to video capture and output devices for X clients. Xv allows applications to display @@ -2351,7 +2362,7 @@ capture or output still images in XPixmaps<footnote> extension available across many operating systems and architectures.</para> - <para>Because the driver is embedded into the X server Xv has a + <para>Because the driver is embedded into the X server Xv has a number of advantages over the V4L2 <link linkend="overlay">video overlay interface</link>. The driver can easily determine the overlay target, &ie; visible graphics memory or off-screen buffers for a @@ -2360,16 +2371,16 @@ overlay, scaling or color-keying, or the clipping functions of the video capture hardware, always in sync with drawing operations or windows moving or changing their stacking order.</para> - <para>To combine the advantages of Xv and V4L a special Xv + <para>To combine the advantages of Xv and V4L a special Xv driver exists in XFree86 and XOrg, just programming any overlay capable Video4Linux device it finds. To enable it <filename>/etc/X11/XF86Config</filename> must contain these lines:</para> - <para><screen> + <para><screen> Section "Module" Load "v4l" EndSection</screen></para> - <para>As of XFree86 4.2 this driver still supports only V4L + <para>As of XFree86 4.2 this driver still supports only V4L ioctls, however it should work just fine with all V4L2 devices through the V4L2 backward-compatibility layer. Since V4L2 permits multiple opens it is possible (if supported by the V4L2 driver) to capture @@ -2377,83 +2388,84 @@ video while an X client requested video overlay. Restrictions of simultaneous capturing and overlay are discussed in <xref linkend="overlay" /> apply.</para> - <para>Only marginally related to V4L2, XFree86 extended Xv to + <para>Only marginally related to V4L2, XFree86 extended Xv to support hardware YUV to RGB conversion and scaling for faster video playback, and added an interface to MPEG-2 decoding hardware. This API is useful to display images captured with V4L2 devices.</para> - </section> + </section> - <section> - <title>Digital Video</title> + <section> + <title>Digital Video</title> - <para>V4L2 does not support digital terrestrial, cable or + <para>V4L2 does not support digital terrestrial, cable or satellite broadcast. A separate project aiming at digital receivers exists. You can find its homepage at <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API has no connection to the V4L2 API except that drivers for hybrid hardware may support both.</para> - </section> + </section> - <section> - <title>Audio Interfaces</title> + <section> + <title>Audio Interfaces</title> - <para>[to do - OSS/ALSA]</para> + <para>[to do - OSS/ALSA]</para> + </section> </section> - </section> - <section id="experimental"> - <title>Experimental API Elements</title> + <section id="experimental"> + <title>Experimental API Elements</title> - <para>The following V4L2 API elements are currently experimental + <para>The following V4L2 API elements are currently experimental and may change in the future.</para> - <itemizedlist> - <listitem> - <para>Video Output Overlay (OSD) Interface, <xref + <itemizedlist> + <listitem> + <para>Video Output Overlay (OSD) Interface, <xref linkend="osd" />.</para> - </listitem> + </listitem> <listitem> - <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>, + <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>, &v4l2-buf-type;, <xref linkend="v4l2-buf-type" />.</para> - </listitem> - <listitem> - <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>, + </listitem> + <listitem> + <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>, &VIDIOC-QUERYCAP; ioctl, <xref linkend="device-capabilities" />.</para> - </listitem> - <listitem> - <para>&VIDIOC-ENUM-FRAMESIZES; and + </listitem> + <listitem> + <para>&VIDIOC-ENUM-FRAMESIZES; and &VIDIOC-ENUM-FRAMEINTERVALS; ioctls.</para> - </listitem> - <listitem> - <para>&VIDIOC-G-ENC-INDEX; ioctl.</para> - </listitem> - <listitem> - <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; + </listitem> + <listitem> + <para>&VIDIOC-G-ENC-INDEX; ioctl.</para> + </listitem> + <listitem> + <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; ioctls.</para> - </listitem> - <listitem> - <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; + </listitem> + <listitem> + <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls.</para> - </listitem> - <listitem> - <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para> - </listitem> - </itemizedlist> - </section> + </listitem> + <listitem> + <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para> + </listitem> + </itemizedlist> + </section> - <section id="obsolete"> - <title>Obsolete API Elements</title> + <section id="obsolete"> + <title>Obsolete API Elements</title> - <para>The following V4L2 API elements were superseded by new + <para>The following V4L2 API elements were superseded by new interfaces and should not be implemented in new drivers.</para> - <itemizedlist> - <listitem> - <para><constant>VIDIOC_G_MPEGCOMP</constant> and + <itemizedlist> + <listitem> + <para><constant>VIDIOC_G_MPEGCOMP</constant> and <constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls, <xref linkend="extended-controls" />.</para> - </listitem> - </itemizedlist> + </listitem> + </itemizedlist> + </section> </section> <!-- diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml index f46450610412..8408caaee276 100644 --- a/Documentation/DocBook/v4l/controls.xml +++ b/Documentation/DocBook/v4l/controls.xml @@ -267,6 +267,12 @@ minimum value disables backlight compensation.</entry> <entry>Chroma automatic gain control.</entry> </row> <row> + <entry><constant>V4L2_CID_CHROMA_GAIN</constant></entry> + <entry>integer</entry> + <entry>Adjusts the Chroma gain control (for use when chroma AGC + is disabled).</entry> + </row> + <row> <entry><constant>V4L2_CID_COLOR_KILLER</constant></entry> <entry>boolean</entry> <entry>Enable the color killer (&ie; force a black & white image in case of a weak video signal).</entry> @@ -277,8 +283,15 @@ minimum value disables backlight compensation.</entry> <entry>Selects a color effect. Possible values for <constant>enum v4l2_colorfx</constant> are: <constant>V4L2_COLORFX_NONE</constant> (0), -<constant>V4L2_COLORFX_BW</constant> (1) and -<constant>V4L2_COLORFX_SEPIA</constant> (2).</entry> +<constant>V4L2_COLORFX_BW</constant> (1), +<constant>V4L2_COLORFX_SEPIA</constant> (2), +<constant>V4L2_COLORFX_NEGATIVE</constant> (3), +<constant>V4L2_COLORFX_EMBOSS</constant> (4), +<constant>V4L2_COLORFX_SKETCH</constant> (5), +<constant>V4L2_COLORFX_SKY_BLUE</constant> (6), +<constant>V4L2_COLORFX_GRASS_GREEN</constant> (7), +<constant>V4L2_COLORFX_SKIN_WHITEN</constant> (8) and +<constant>V4L2_COLORFX_VIVID</constant> (9).</entry> </row> <row> <entry><constant>V4L2_CID_ROTATE</constant></entry> @@ -1825,6 +1838,25 @@ wide-angle direction. The zoom speed unit is driver-specific.</entry> <row><entry></entry></row> <row> + <entry spanname="id"><constant>V4L2_CID_IRIS_ABSOLUTE</constant> </entry> + <entry>integer</entry> + </row><row><entry spanname="descr">This control sets the +camera's aperture to the specified value. The unit is undefined. +Larger values open the iris wider, smaller values close it.</entry> + </row> + <row><entry></entry></row> + + <row> + <entry spanname="id"><constant>V4L2_CID_IRIS_RELATIVE</constant> </entry> + <entry>integer</entry> + </row><row><entry spanname="descr">This control modifies the +camera's aperture by the specified amount. The unit is undefined. +Positive values open the iris one step further, negative values close +it one step further. This is a write-only control.</entry> + </row> + <row><entry></entry></row> + + <row> <entry spanname="id"><constant>V4L2_CID_PRIVACY</constant> </entry> <entry>boolean</entry> </row><row><entry spanname="descr">Prevent video from being acquired diff --git a/Documentation/DocBook/v4l/dev-event.xml b/Documentation/DocBook/v4l/dev-event.xml new file mode 100644 index 000000000000..be5a98fb4fab --- /dev/null +++ b/Documentation/DocBook/v4l/dev-event.xml @@ -0,0 +1,31 @@ + <title>Event Interface</title> + + <para>The V4L2 event interface provides means for user to get + immediately notified on certain conditions taking place on a device. + This might include start of frame or loss of signal events, for + example. + </para> + + <para>To receive events, the events the user is interested in first must + be subscribed using the &VIDIOC-SUBSCRIBE-EVENT; ioctl. Once an event is + subscribed, the events of subscribed types are dequeueable using the + &VIDIOC-DQEVENT; ioctl. Events may be unsubscribed using + VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event type V4L2_EVENT_ALL may + be used to unsubscribe all the events the driver supports.</para> + + <para>The event subscriptions and event queues are specific to file + handles. Subscribing an event on one file handle does not affect + other file handles. + </para> + + <para>The information on dequeueable events is obtained by using select or + poll system calls on video devices. The V4L2 events use POLLPRI events on + poll system call and exceptions on select system call. </para> + + <!-- +Local Variables: +mode: sgml +sgml-parent-document: "v4l2.sgml" +indent-tabs-mode: nil +End: + --> diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml index e870330cbf77..d424886beda0 100644 --- a/Documentation/DocBook/v4l/io.xml +++ b/Documentation/DocBook/v4l/io.xml @@ -702,6 +702,16 @@ They can be both cleared however, then the buffer is in "dequeued" state, in the application domain to say so.</entry> </row> <row> + <entry><constant>V4L2_BUF_FLAG_ERROR</constant></entry> + <entry>0x0040</entry> + <entry>When this flag is set, the buffer has been dequeued + successfully, although the data might have been corrupted. + This is recoverable, streaming may continue as normal and + the buffer may be reused normally. + Drivers set this flag when the <constant>VIDIOC_DQBUF</constant> + ioctl is called.</entry> + </row> + <row> <entry><constant>V4L2_BUF_FLAG_KEYFRAME</constant></entry> <entry>0x0008</entry> <entry>Drivers set or clear this flag when calling the @@ -918,8 +928,8 @@ order</emphasis>.</para> <para>When the driver provides or accepts images field by field rather than interleaved, it is also important applications understand -how the fields combine to frames. We distinguish between top and -bottom fields, the <emphasis>spatial order</emphasis>: The first line +how the fields combine to frames. We distinguish between top (aka odd) and +bottom (aka even) fields, the <emphasis>spatial order</emphasis>: The first line of the top field is the first line of an interlaced frame, the first line of the bottom field is the second line of that frame.</para> @@ -972,12 +982,12 @@ between <constant>V4L2_FIELD_TOP</constant> and <row> <entry><constant>V4L2_FIELD_TOP</constant></entry> <entry>2</entry> - <entry>Images consist of the top field only.</entry> + <entry>Images consist of the top (aka odd) field only.</entry> </row> <row> <entry><constant>V4L2_FIELD_BOTTOM</constant></entry> <entry>3</entry> - <entry>Images consist of the bottom field only. + <entry>Images consist of the bottom (aka even) field only. Applications may wish to prevent a device from capturing interlaced images because they will have "comb" or "feathering" artefacts around moving objects.</entry> diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index 885968d6a2fc..c4ad0a8e42dc 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -792,6 +792,18 @@ http://www.thedirks.org/winnov/</ulink></para></entry> <entry>'YYUV'</entry> <entry>unknown</entry> </row> + <row id="V4L2-PIX-FMT-Y4"> + <entry><constant>V4L2_PIX_FMT_Y4</constant></entry> + <entry>'Y04 '</entry> + <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used, +the other bits are set to 0.</entry> + </row> + <row id="V4L2-PIX-FMT-Y6"> + <entry><constant>V4L2_PIX_FMT_Y6</constant></entry> + <entry>'Y06 '</entry> + <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used, +the other bits are set to 0.</entry> + </row> </tbody> </tgroup> </table> diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 060105af49e5..9737243377a3 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -401,6 +401,7 @@ and discussions on the V4L mailing list.</revremark> <section id="ttx"> &sub-dev-teletext; </section> <section id="radio"> &sub-dev-radio; </section> <section id="rds"> &sub-dev-rds; </section> + <section id="event"> &sub-dev-event; </section> </chapter> <chapter id="driver"> @@ -426,6 +427,7 @@ and discussions on the V4L mailing list.</revremark> &sub-cropcap; &sub-dbg-g-chip-ident; &sub-dbg-g-register; + &sub-dqevent; &sub-encoder-cmd; &sub-enumaudio; &sub-enumaudioout; @@ -467,6 +469,7 @@ and discussions on the V4L mailing list.</revremark> &sub-reqbufs; &sub-s-hw-freq-seek; &sub-streamon; + &sub-subscribe-event; <!-- End of ioctls. --> &sub-mmap; &sub-munmap; diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 068325940658..865b06d9e679 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -1018,6 +1018,13 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> { V4L2_COLORFX_NONE = 0, V4L2_COLORFX_BW = 1, V4L2_COLORFX_SEPIA = 2, + V4L2_COLORFX_NEGATIVE = 3, + V4L2_COLORFX_EMBOSS = 4, + V4L2_COLORFX_SKETCH = 5, + V4L2_COLORFX_SKY_BLUE = 6, + V4L2_COLORFX_GRASS_GREEN = 7, + V4L2_COLORFX_SKIN_WHITEN = 8, + V4L2_COLORFX_VIVID = 9. }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) @@ -1271,6 +1278,9 @@ enum <link linkend="v4l2-exposure-auto-type">v4l2_exposure_auto_type</link> { #define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16) +#define V4L2_CID_IRIS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+17) +#define V4L2_CID_IRIS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+18) + /* FM Modulator class control IDs */ #define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) #define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1) diff --git a/Documentation/DocBook/v4l/vidioc-dqevent.xml b/Documentation/DocBook/v4l/vidioc-dqevent.xml new file mode 100644 index 000000000000..4e0a7cc30812 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-dqevent.xml @@ -0,0 +1,131 @@ +<refentry id="vidioc-dqevent"> + <refmeta> + <refentrytitle>ioctl VIDIOC_DQEVENT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_DQEVENT</refname> + <refpurpose>Dequeue event</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_event +*<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_DQEVENT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>Dequeue an event from a video device. No input is required + for this ioctl. All the fields of the &v4l2-event; structure are + filled by the driver. The file handle will also receive exceptions + which the application may get by e.g. using the select system + call.</para> + + <table frame="none" pgwide="1" id="v4l2-event"> + <title>struct <structname>v4l2_event</structname></title> + <tgroup cols="4"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>type</structfield></entry> + <entry></entry> + <entry>Type of the event.</entry> + </row> + <row> + <entry>union</entry> + <entry><structfield>u</structfield></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>&v4l2-event-vsync;</entry> + <entry><structfield>vsync</structfield></entry> + <entry>Event data for event V4L2_EVENT_VSYNC. + </entry> + </row> + <row> + <entry></entry> + <entry>__u8</entry> + <entry><structfield>data</structfield>[64]</entry> + <entry>Event data. Defined by the event type. The union + should be used to define easily accessible type for + events.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>pending</structfield></entry> + <entry></entry> + <entry>Number of pending events excluding this one.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>sequence</structfield></entry> + <entry></entry> + <entry>Event sequence number. The sequence number is + incremented for every subscribed event that takes place. + If sequence numbers are not contiguous it means that + events have been lost. + </entry> + </row> + <row> + <entry>struct timespec</entry> + <entry><structfield>timestamp</structfield></entry> + <entry></entry> + <entry>Event timestamp.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[9]</entry> + <entry></entry> + <entry>Reserved for future extensions. Drivers must set + the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + </refsect1> +</refentry> +<!-- +Local Variables: +mode: sgml +sgml-parent-document: "v4l2.sgml" +indent-tabs-mode: nil +End: +--> diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/v4l/vidioc-enuminput.xml index 71b868e2fb8f..476fe1d2bba0 100644 --- a/Documentation/DocBook/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/v4l/vidioc-enuminput.xml @@ -283,7 +283,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. <entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry> </row> <row> - <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry> + <entry><constant>V4L2_IN_CAP_CUSTOM_TIMINGS</constant></entry> <entry>0x00000002</entry> <entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry> </row> diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/v4l/vidioc-qbuf.xml index b843bd7b3897..ab691ebf3b93 100644 --- a/Documentation/DocBook/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/v4l/vidioc-qbuf.xml @@ -111,7 +111,11 @@ from the driver's outgoing queue. They just set the and <structfield>reserved</structfield> fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant> is called with a pointer to this structure the driver fills the -remaining fields or returns an error code.</para> +remaining fields or returns an error code. The driver may also set +<constant>V4L2_BUF_FLAG_ERROR</constant> in the <structfield>flags</structfield> +field. It indicates a non-critical (recoverable) streaming error. In such case +the application may continue as normal, but should be aware that data in the +dequeued buffer might be corrupted.</para> <para>By default <constant>VIDIOC_DQBUF</constant> blocks when no buffer is in the outgoing queue. When the @@ -158,7 +162,13 @@ enqueue a user pointer buffer.</para> <para><constant>VIDIOC_DQBUF</constant> failed due to an internal error. Can also indicate temporary problems like signal loss. Note the driver might dequeue an (empty) buffer despite -returning an error, or even stop capturing.</para> +returning an error, or even stop capturing. Reusing such buffer may be unsafe +though and its details (e.g. <structfield>index</structfield>) may not be +returned either. It is recommended that drivers indicate recoverable errors +by setting the <constant>V4L2_BUF_FLAG_ERROR</constant> and returning 0 instead. +In that case the application should be able to safely reuse the buffer and +continue streaming. + </para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml index 4876ff1a1a04..8e0e055ac934 100644 --- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml @@ -325,7 +325,7 @@ should be part of the control documentation.</entry> <entry>n/a</entry> <entry>This is not a control. When <constant>VIDIOC_QUERYCTRL</constant> is called with a control ID -equal to a control class code (see <xref linkend="ctrl-class" />), the +equal to a control class code (see <xref linkend="ctrl-class" />) + 1, the ioctl returns the name of the control class and this control type. Older drivers which do not support this feature return an &EINVAL;.</entry> diff --git a/Documentation/DocBook/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/v4l/vidioc-reqbufs.xml index 1c0816372074..69800ae23348 100644 --- a/Documentation/DocBook/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/v4l/vidioc-reqbufs.xml @@ -61,7 +61,7 @@ fields of the <structname>v4l2_requestbuffers</structname> structure. They set the <structfield>type</structfield> field to the respective stream or buffer type, the <structfield>count</structfield> field to the desired number of buffers, <structfield>memory</structfield> -must be set to the requested I/O method and the reserved array +must be set to the requested I/O method and the <structfield>reserved</structfield> array must be zeroed. When the ioctl is called with a pointer to this structure the driver will attempt to allocate the requested number of buffers and it stores the actual number diff --git a/Documentation/DocBook/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/v4l/vidioc-subscribe-event.xml new file mode 100644 index 000000000000..8b501791aa68 --- /dev/null +++ b/Documentation/DocBook/v4l/vidioc-subscribe-event.xml @@ -0,0 +1,133 @@ +<refentry id="vidioc-subscribe-event"> + <refmeta> + <refentrytitle>ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refname> + <refpurpose>Subscribe or unsubscribe event</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_event_subscription +*<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>Subscribe or unsubscribe V4L2 event. Subscribed events are + dequeued by using the &VIDIOC-DQEVENT; ioctl.</para> + + <table frame="none" pgwide="1" id="v4l2-event-subscription"> + <title>struct <structname>v4l2_event_subscription</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>type</structfield></entry> + <entry>Type of the event.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[7]</entry> + <entry>Reserved for future extensions. Drivers and applications + must set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="event-type"> + <title>Event Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_EVENT_ALL</constant></entry> + <entry>0</entry> + <entry>All events. V4L2_EVENT_ALL is valid only for + VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once. + </entry> + </row> + <row> + <entry><constant>V4L2_EVENT_VSYNC</constant></entry> + <entry>1</entry> + <entry>This event is triggered on the vertical sync. + This event has &v4l2-event-vsync; associated with it. + </entry> + </row> + <row> + <entry><constant>V4L2_EVENT_EOS</constant></entry> + <entry>2</entry> + <entry>This event is triggered when the end of a stream is reached. + This is typically used with MPEG decoders to report to the application + when the last of the MPEG stream has been decoded. + </entry> + </row> + <row> + <entry><constant>V4L2_EVENT_PRIVATE_START</constant></entry> + <entry>0x08000000</entry> + <entry>Base event number for driver-private events.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table frame="none" pgwide="1" id="v4l2-event-vsync"> + <title>struct <structname>v4l2_event_vsync</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u8</entry> + <entry><structfield>field</structfield></entry> + <entry>The upcoming field. See &v4l2-field;.</entry> + </row> + </tbody> + </tgroup> + </table> + + </refsect1> +</refentry> +<!-- +Local Variables: +mode: sgml +sgml-parent-document: "v4l2.sgml" +indent-tabs-mode: nil +End: +--> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 0d0f7b4d4b1a..0ba149de2608 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -5518,34 +5518,41 @@ struct _snd_pcm_runtime { ]]> </programlisting> </informalexample> + + For the raw data, <structfield>size</structfield> field must be + set properly. This specifies the maximum size of the proc file access. </para> <para> - The callback is much more complicated than the text-file - version. You need to use a low-level I/O functions such as + The read/write callbacks of raw mode are more direct than the text mode. + You need to use a low-level I/O functions such as <function>copy_from/to_user()</function> to transfer the data. <informalexample> <programlisting> <![CDATA[ - static long my_file_io_read(struct snd_info_entry *entry, + static ssize_t my_file_io_read(struct snd_info_entry *entry, void *file_private_data, struct file *file, char *buf, - unsigned long count, - unsigned long pos) + size_t count, + loff_t pos) { - long size = count; - if (pos + size > local_max_size) - size = local_max_size - pos; - if (copy_to_user(buf, local_data + pos, size)) + if (copy_to_user(buf, local_data + pos, count)) return -EFAULT; - return size; + return count; } ]]> </programlisting> </informalexample> + + If the size of the info entry has been set up properly, + <structfield>count</structfield> and <structfield>pos</structfield> are + guaranteed to fit within 0 and the given size. + You don't have to check the range in the callbacks unless any + other condition is required. + </para> </chapter> diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index e83f2ea76415..898ded24510d 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -216,7 +216,7 @@ The driver should return one of the following result codes: - PCI_ERS_RESULT_NEED_RESET Driver returns this if it thinks the device is not - recoverable in it's current state and it needs a slot + recoverable in its current state and it needs a slot reset to proceed. - PCI_ERS_RESULT_DISCONNECT @@ -241,7 +241,7 @@ in working condition. The driver is not supposed to restart normal driver I/O operations at this point. It should limit itself to "probing" the device to -check it's recoverability status. If all is right, then the platform +check its recoverability status. If all is right, then the platform will call resume() once all drivers have ack'd link_reset(). Result codes: diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 1423d2570d78..44c6dcc93d6d 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -3,35 +3,79 @@ Using RCU's CPU Stall Detector The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables RCU's CPU stall detector, which detects conditions that unduly delay RCU grace periods. The stall detector's idea of what constitutes -"unduly delayed" is controlled by a pair of C preprocessor macros: +"unduly delayed" is controlled by a set of C preprocessor macros: RCU_SECONDS_TILL_STALL_CHECK This macro defines the period of time that RCU will wait from the beginning of a grace period until it issues an RCU CPU - stall warning. It is normally ten seconds. + stall warning. This time period is normally ten seconds. RCU_SECONDS_TILL_STALL_RECHECK This macro defines the period of time that RCU will wait after - issuing a stall warning until it issues another stall warning. - It is normally set to thirty seconds. + issuing a stall warning until it issues another stall warning + for the same stall. This time period is normally set to thirty + seconds. RCU_STALL_RAT_DELAY - The CPU stall detector tries to make the offending CPU rat on itself, - as this often gives better-quality stack traces. However, if - the offending CPU does not detect its own stall in the number - of jiffies specified by RCU_STALL_RAT_DELAY, then other CPUs will - complain. This is normally set to two jiffies. + The CPU stall detector tries to make the offending CPU print its + own warnings, as this often gives better-quality stack traces. + However, if the offending CPU does not detect its own stall in + the number of jiffies specified by RCU_STALL_RAT_DELAY, then + some other CPU will complain. This delay is normally set to + two jiffies. -The following problems can result in an RCU CPU stall warning: +When a CPU detects that it is stalling, it will print a message similar +to the following: + +INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies) + +This message indicates that CPU 5 detected that it was causing a stall, +and that the stall was affecting RCU-sched. This message will normally be +followed by a stack dump of the offending CPU. On TREE_RCU kernel builds, +RCU and RCU-sched are implemented by the same underlying mechanism, +while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented +by rcu_preempt_state. + +On the other hand, if the offending CPU fails to print out a stall-warning +message quickly enough, some other CPU will print a message similar to +the following: + +INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 jiffies) + +This message indicates that CPU 2 detected that CPUs 3 and 5 were both +causing stalls, and that the stall was affecting RCU-bh. This message +will normally be followed by stack dumps for each CPU. Please note that +TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, +and that the tasks will be indicated by PID, for example, "P3421". +It is even possible for a rcu_preempt_state stall to be caused by both +CPUs -and- tasks, in which case the offending CPUs and tasks will all +be called out in the list. + +Finally, if the grace period ends just as the stall warning starts +printing, there will be a spurious stall-warning message: + +INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies) + +This is rare, but does happen from time to time in real life. + +So your kernel printed an RCU CPU stall warning. The next question is +"What caused it?" The following problems can result in RCU CPU stall +warnings: o A CPU looping in an RCU read-side critical section. -o A CPU looping with interrupts disabled. +o A CPU looping with interrupts disabled. This condition can + result in RCU-sched and RCU-bh stalls. -o A CPU looping with preemption disabled. +o A CPU looping with preemption disabled. This condition can + result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh + stalls. + +o A CPU looping with bottom halves disabled. This condition can + result in RCU-sched and RCU-bh stalls. o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel without invoking schedule(). @@ -39,20 +83,24 @@ o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel o A bug in the RCU implementation. o A hardware failure. This is quite unlikely, but has occurred - at least once in a former life. A CPU failed in a running system, + at least once in real life. A CPU failed in a running system, becoming unresponsive, but not causing an immediate crash. This resulted in a series of RCU CPU stall warnings, eventually leading the realization that the CPU had failed. -The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning. -SRCU does not do so directly, but its calls to synchronize_sched() will -result in RCU-sched detecting any CPU stalls that might be occurring. - -To diagnose the cause of the stall, inspect the stack traces. The offending -function will usually be near the top of the stack. If you have a series -of stall warnings from a single extended stall, comparing the stack traces -can often help determine where the stall is occurring, which will usually -be in the function nearest the top of the stack that stays the same from -trace to trace. +The RCU, RCU-sched, and RCU-bh implementations have CPU stall +warning. SRCU does not have its own CPU stall warnings, but its +calls to synchronize_sched() will result in RCU-sched detecting +RCU-sched-related CPU stalls. Please note that RCU only detects +CPU stalls when there is a grace period in progress. No grace period, +no CPU stall warnings. + +To diagnose the cause of the stall, inspect the stack traces. +The offending function will usually be near the top of the stack. +If you have a series of stall warnings from a single extended stall, +comparing the stack traces can often help determine where the stall +is occurring, which will usually be in the function nearest the top of +that portion of the stack which remains the same from trace to trace. +If you can reliably trigger the stall, ftrace can be quite helpful. RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE. diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 0e50bc2aa1e2..5d9016795fd8 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -182,16 +182,6 @@ Similarly, sched_expedited RCU provides the following: sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0 sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0 sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0 - state: -1 / 0:0 3:0 4:0 - -As before, the first four lines are similar to those for RCU. -The last line shows the task-migration state. The first number is --1 if synchronize_sched_expedited() is idle, -2 if in the process of -posting wakeups to the migration kthreads, and N when waiting on CPU N. -Each of the colon-separated fields following the "/" is a CPU:state pair. -Valid states are "0" for idle, "1" for waiting for quiescent state, -"2" for passed through quiescent state, and "3" when a race with a -CPU-hotplug event forces use of the synchronize_sched() primitive. USAGE diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index 8608fd85e921..efd8cc95c06b 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -256,23 +256,23 @@ o Each element of the form "1/1 0:127 ^0" represents one struct The output of "cat rcu/rcu_pending" looks as follows: rcu_sched: - 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 - 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 - 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 - 3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723 - 4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110 - 5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456 - 6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834 - 7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888 + 0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 + 1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 + 2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 + 3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723 + 4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110 + 5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456 + 6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834 + 7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888 rcu_bh: - 0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314 - 1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180 - 2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936 - 3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863 - 4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671 - 5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235 - 6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921 - 7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542 + 0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314 + 1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180 + 2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936 + 3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863 + 4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671 + 5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235 + 6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921 + 7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542 As always, this is once again split into "rcu_sched" and "rcu_bh" portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional @@ -284,6 +284,9 @@ o "np" is the number of times that __rcu_pending() has been invoked o "qsp" is the number of times that the RCU was waiting for a quiescent state from this CPU. +o "rpq" is the number of times that the CPU had passed through + a quiescent state, but not yet reported it to RCU. + o "cbr" is the number of times that this CPU had RCU callbacks that had passed through a grace period, and were thus ready to be invoked. diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt index 34614b4c708e..e9dab41c0fe0 100644 --- a/Documentation/Smack.txt +++ b/Documentation/Smack.txt @@ -73,7 +73,7 @@ NOTE: Smack labels are limited to 23 characters. The attr command If you don't do anything special all users will get the floor ("_") label when they log in. If you do want to log in via the hacked ssh at other labels use the attr command to set the smack value on the -home directory and it's contents. +home directory and its contents. You can add access rules in /etc/smack/accesses. They take the form: diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 82e418d648d0..7f5fc3ba9c91 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -20,6 +20,8 @@ Samsung-S3C24XX - S3C24XX ARM Linux Overview Sharp-LH - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC) +SPEAr + - ST SPEAr platform Linux Overview VFP/ - Release notes for Linux Kernel Vector Floating Point support code empeg/ diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy index 7197a9e958ee..f9f62e8c0719 100644 --- a/Documentation/arm/SA1100/ADSBitsy +++ b/Documentation/arm/SA1100/ADSBitsy @@ -32,7 +32,7 @@ Notes: - The flash on board is divided into 3 partitions. You should be careful to use flash on board. - It's partition is different from GraphicsClient Plus and GraphicsMaster + Its partition is different from GraphicsClient Plus and GraphicsMaster - 16bpp mode requires a different cable than what ships with the board. Contact ADS or look through the manual to wire your own. Currently, diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt new file mode 100644 index 000000000000..253a35c6f782 --- /dev/null +++ b/Documentation/arm/SPEAr/overview.txt @@ -0,0 +1,60 @@ + SPEAr ARM Linux Overview + ========================== + +Introduction +------------ + + SPEAr (Structured Processor Enhanced Architecture). + weblink : http://www.st.com/spear + + The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are + supported by the 'spear' platform of ARM Linux. Currently SPEAr300, + SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX + series is in progress. + + Hierarchy in SPEAr is as follows: + + SPEAr (Platform) + - SPEAr3XX (3XX SOC series, based on ARM9) + - SPEAr300 (SOC) + - SPEAr300_EVB (Evaluation Board) + - SPEAr310 (SOC) + - SPEAr310_EVB (Evaluation Board) + - SPEAr320 (SOC) + - SPEAr320_EVB (Evaluation Board) + - SPEAr6XX (6XX SOC series, based on ARM9) + - SPEAr600 (SOC) + - SPEAr600_EVB (Evaluation Board) + - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) + - SPEAr1300 (SOC) + + Configuration + ------------- + + A generic configuration is provided for each machine, and can be used as the + default by + make spear600_defconfig + make spear300_defconfig + make spear310_defconfig + make spear320_defconfig + + Layout + ------ + + The common files for multiple machine families (SPEAr3XX, SPEAr6XX and + SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + with headers in plat/. + + Each machine series have a directory with name arch/arm/mach-spear followed by + series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. + + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for + spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine + specific files, like spear300.c, spear310.c, spear320.c and spear600.c. + mach-spear* also contains board specific files for each machine type. + + + Document Author + --------------- + + Viresh Kumar, (c) 2010 ST Microelectronics diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen index 1e6a23fdf2fc..dc460f055647 100644 --- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen +++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen @@ -7,7 +7,7 @@ The driver only implements a four-wire touch panel protocol. The touchscreen driver is maintenance free except for the pen-down or touch threshold. Some resistive displays and board combinations may -require tuning of this threshold. The driver exposes some of it's +require tuning of this threshold. The driver exposes some of its internal state in the sys filesystem. If the kernel is configured with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a directory diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 396bec3b74ed..ac4d47187122 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -320,7 +320,7 @@ counter decrement would not become globally visible until the obj->active update does. As a historical note, 32-bit Sparc used to only allow usage of -24-bits of it's atomic_t type. This was because it used 8 bits +24-bits of its atomic_t type. This was because it used 8 bits as a spinlock for SMP safety. Sparc32 lacked a "compare and swap" type instruction. However, 32-bit Sparc has since been moved over to a "hash table of spinlocks" scheme, that allows the full 32-bit diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index 9898c7ded7d3..f731c1e56475 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -43,7 +43,7 @@ void bfin_gpio_irq_free(unsigned gpio); The request functions will record the function state for a certain pin, - the free functions will clear it's function state. + the free functions will clear its function state. Once a pin is requested, it can't be requested again before it is freed by previous caller, otherwise kernel will dump stacks, and the request function fail. diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 2b5f823abd03..9164ae3b83bc 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -5,7 +5,7 @@ This document describes the cache/tlb flushing interfaces called by the Linux VM subsystem. It enumerates over each interface, -describes it's intended purpose, and what side effect is expected +describes its intended purpose, and what side effect is expected after the interface is invoked. The side effects described below are stated for a uniprocessor @@ -231,7 +231,7 @@ require a whole different set of interfaces to handle properly. The biggest problem is that of virtual aliasing in the data cache of a processor. -Is your port susceptible to virtual aliasing in it's D-cache? +Is your port susceptible to virtual aliasing in its D-cache? Well, if your D-cache is virtually indexed, is larger in size than PAGE_SIZE, and does not prevent multiple cache lines for the same physical address from existing at once, you have this problem. @@ -249,7 +249,7 @@ one way to solve this (in particular SPARC_FLAG_MMAPSHARED). Next, you have to solve the D-cache aliasing issue for all other cases. Please keep in mind that fact that, for a given page mapped into some user address space, there is always at least one more -mapping, that of the kernel in it's linear mapping starting at +mapping, that of the kernel in its linear mapping starting at PAGE_OFFSET. So immediately, once the first user maps a given physical page into its address space, by implication the D-cache aliasing problem has the potential to exist since the kernel already diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index a1ca5924faff..57444c2609fc 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -572,7 +572,7 @@ void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, Called when a task attach operation has failed after can_attach() has succeeded. A subsystem whose can_attach() has some side-effects should provide this -function, so that the subsytem can implement a rollback. If not, not necessary. +function, so that the subsystem can implement a rollback. If not, not necessary. This will be called only about subsystems whose can_attach() operation have succeeded. diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 4160df82b3f5..51682ab2dd1a 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -42,7 +42,7 @@ Nodes to a set of tasks. In this document "Memory Node" refers to an on-line node that contains memory. Cpusets constrain the CPU and Memory placement of tasks to only -the resources within a tasks current cpuset. They form a nested +the resources within a task's current cpuset. They form a nested hierarchy visible in a virtual file system. These are the essential hooks, beyond what is already present, required to manage dynamic job placement on large systems. @@ -53,11 +53,11 @@ Documentation/cgroups/cgroups.txt. Requests by a task, using the sched_setaffinity(2) system call to include CPUs in its CPU affinity mask, and using the mbind(2) and set_mempolicy(2) system calls to include Memory Nodes in its memory -policy, are both filtered through that tasks cpuset, filtering out any +policy, are both filtered through that task's cpuset, filtering out any CPUs or Memory Nodes not in that cpuset. The scheduler will not schedule a task on a CPU that is not allowed in its cpus_allowed vector, and the kernel page allocator will not allocate a page on a -node that is not allowed in the requesting tasks mems_allowed vector. +node that is not allowed in the requesting task's mems_allowed vector. User level code may create and destroy cpusets by name in the cgroup virtual file system, manage the attributes and permissions of these @@ -121,9 +121,9 @@ Cpusets extends these two mechanisms as follows: - Each task in the system is attached to a cpuset, via a pointer in the task structure to a reference counted cgroup structure. - Calls to sched_setaffinity are filtered to just those CPUs - allowed in that tasks cpuset. + allowed in that task's cpuset. - Calls to mbind and set_mempolicy are filtered to just - those Memory Nodes allowed in that tasks cpuset. + those Memory Nodes allowed in that task's cpuset. - The root cpuset contains all the systems CPUs and Memory Nodes. - For any cpuset, one can define child cpusets containing a subset @@ -141,11 +141,11 @@ into the rest of the kernel, none in performance critical paths: - in init/main.c, to initialize the root cpuset at system boot. - in fork and exit, to attach and detach a task from its cpuset. - in sched_setaffinity, to mask the requested CPUs by what's - allowed in that tasks cpuset. + allowed in that task's cpuset. - in sched.c migrate_live_tasks(), to keep migrating tasks within the CPUs allowed by their cpuset, if possible. - in the mbind and set_mempolicy system calls, to mask the requested - Memory Nodes by what's allowed in that tasks cpuset. + Memory Nodes by what's allowed in that task's cpuset. - in page_alloc.c, to restrict memory to allowed nodes. - in vmscan.c, to restrict page recovery to the current cpuset. @@ -155,7 +155,7 @@ new system calls are added for cpusets - all support for querying and modifying cpusets is via this cpuset file system. The /proc/<pid>/status file for each task has four added lines, -displaying the tasks cpus_allowed (on which CPUs it may be scheduled) +displaying the task's cpus_allowed (on which CPUs it may be scheduled) and mems_allowed (on which Memory Nodes it may obtain memory), in the two formats seen in the following example: @@ -323,17 +323,17 @@ stack segment pages of a task. By default, both kinds of memory spreading are off, and memory pages are allocated on the node local to where the task is running, -except perhaps as modified by the tasks NUMA mempolicy or cpuset +except perhaps as modified by the task's NUMA mempolicy or cpuset configuration, so long as sufficient free memory pages are available. When new cpusets are created, they inherit the memory spread settings of their parent. Setting memory spreading causes allocations for the affected page -or slab caches to ignore the tasks NUMA mempolicy and be spread +or slab caches to ignore the task's NUMA mempolicy and be spread instead. Tasks using mbind() or set_mempolicy() calls to set NUMA mempolicies will not notice any change in these calls as a result of -their containing tasks memory spread settings. If memory spreading +their containing task's memory spread settings. If memory spreading is turned off, then the currently specified NUMA mempolicy once again applies to memory page allocations. @@ -357,7 +357,7 @@ pages from the node returned by cpuset_mem_spread_node(). The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next -node in the current tasks mems_allowed to prefer for the allocation. +node in the current task's mems_allowed to prefer for the allocation. This memory placement policy is also known (in other contexts) as round-robin or interleave. @@ -594,7 +594,7 @@ is attached, is subtle. If a cpuset has its Memory Nodes modified, then for each task attached to that cpuset, the next time that the kernel attempts to allocate a page of memory for that task, the kernel will notice the change -in the tasks cpuset, and update its per-task memory placement to +in the task's cpuset, and update its per-task memory placement to remain within the new cpusets memory placement. If the task was using mempolicy MPOL_BIND, and the nodes to which it was bound overlap with its new cpuset, then the task will continue to use whatever subset @@ -603,13 +603,13 @@ was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed in the new cpuset, then the task will be essentially treated as if it was MPOL_BIND bound to the new cpuset (even though its NUMA placement, as queried by get_mempolicy(), doesn't change). If a task is moved -from one cpuset to another, then the kernel will adjust the tasks +from one cpuset to another, then the kernel will adjust the task's memory placement, as above, the next time that the kernel attempts to allocate a page of memory for that task. If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset will have its allowed CPU placement changed immediately. Similarly, -if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its +if a task's pid is written to another cpusets 'cpuset.tasks' file, then its allowed CPU placement is changed immediately. If such a task had been bound to some subset of its cpuset using the sched_setaffinity() call, the task will be allowed to run on any CPU allowed in its new cpuset, @@ -626,16 +626,16 @@ cpusets memory placement policy 'cpuset.mems' subsequently changes. If the cpuset flag file 'cpuset.memory_migrate' is set true, then when tasks are attached to that cpuset, any pages that task had allocated to it on nodes in its previous cpuset are migrated -to the tasks new cpuset. The relative placement of the page within +to the task's new cpuset. The relative placement of the page within the cpuset is preserved during these migration operations if possible. For example if the page was on the second valid node of the prior cpuset then the page will be placed on the second valid node of the new cpuset. -Also if 'cpuset.memory_migrate' is set true, then if that cpusets +Also if 'cpuset.memory_migrate' is set true, then if that cpuset's 'cpuset.mems' file is modified, pages allocated to tasks in that cpuset, that were on nodes in the previous setting of 'cpuset.mems', will be moved to nodes in the new setting of 'mems.' -Pages that were not in the tasks prior cpuset, or in the cpusets +Pages that were not in the task's prior cpuset, or in the cpuset's prior 'cpuset.mems' setting, will not be moved. There is an exception to the above. If hotplug functionality is used @@ -655,7 +655,7 @@ There is a second exception to the above. GFP_ATOMIC requests are kernel internal allocations that must be satisfied, immediately. The kernel may drop some request, in rare cases even panic, if a GFP_ATOMIC alloc fails. If the request cannot be satisfied within -the current tasks cpuset, then we relax the cpuset, and look for +the current task's cpuset, then we relax the cpuset, and look for memory anywhere we can find it. It's better to violate the cpuset than stress the kernel. diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index f7f68b2ac199..b7eececfb195 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -244,7 +244,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. we have to check if OLDPAGE/NEWPAGE is a valid page after commit(). 8. LRU - Each memcg has its own private LRU. Now, it's handling is under global + Each memcg has its own private LRU. Now, its handling is under global VM's control (means that it's handled under global zone->lru_lock). Almost all routines around memcg's LRU is called by global LRU's list management functions under zone->lru_lock(). diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 3a6aecd078ba..6cab1f29da4c 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -263,7 +263,7 @@ some of the pages cached in the cgroup (page cache pages). 4.2 Task migration -When a task migrates from one cgroup to another, it's charge is not +When a task migrates from one cgroup to another, its charge is not carried forward by default. The pages allocated from the original cgroup still remain charged to it, the charge is dropped when the page is freed or reclaimed. diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index 78c9466a9aa8..e5c5f5e6ab70 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -88,7 +88,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); int gfp_mask - GFP mask. Note: When registering new callback user, connector core assigns - netlink group to the user which is equal to it's id.idx. + netlink group to the user which is equal to its id.idx. /*****************************************/ Protocol description. diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt index df03169782ea..a2db35287003 100644 --- a/Documentation/credentials.txt +++ b/Documentation/credentials.txt @@ -408,9 +408,6 @@ This should be used inside the RCU read lock, as in the following example: ... } -A function need not get RCU read lock to use __task_cred() if it is holding a -spinlock at the time as this implicitly holds the RCU read lock. - Should it be necessary to hold another task's credentials for a long period of time, and possibly to sleep whilst doing so, then the caller should get a reference on them using: @@ -426,17 +423,16 @@ credentials, hiding the RCU magic from the caller: uid_t task_uid(task) Task's real UID uid_t task_euid(task) Task's effective UID -If the caller is holding a spinlock or the RCU read lock at the time anyway, -then: +If the caller is holding the RCU read lock at the time anyway, then: __task_cred(task)->uid __task_cred(task)->euid should be used instead. Similarly, if multiple aspects of a task's credentials -need to be accessed, RCU read lock or a spinlock should be used, __task_cred() -called, the result stored in a temporary pointer and then the credential -aspects called from that before dropping the lock. This prevents the -potentially expensive RCU magic from being invoked multiple times. +need to be accessed, RCU read lock should be used, __task_cred() called, the +result stored in a temporary pointer and then the credential aspects called +from that before dropping the lock. This prevents the potentially expensive +RCU magic from being invoked multiple times. Should some other single aspect of another task's credentials need to be accessed, then this can be used: diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 2ecd834585e6..4a0c2b56e690 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -41,7 +41,7 @@ This application requires the following to function properly as of now. * Cards that fall in this category ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -At present the cards that fall in this category are the Twinhan and it's +At present the cards that fall in this category are the Twinhan and its clones, these cards are available as VVMER, Tomato, Hercules, Orange and so on. diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index 4865addebe1c..47c30098dab6 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -1,7 +1,7 @@ Thanks go to the following people for patches and contributions: Michael Hunold <m.hunold@gmx.de> - for the initial saa7146 driver and it's recent overhaul + for the initial saa7146 driver and its recent overhaul Christian Theiss for his work on the initial Linux DVB driver diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 05df0b7514b6..e7965f4a385a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -520,29 +520,6 @@ Who: Hans de Goede <hdegoede@redhat.com> ---------------------------- -What: corgikbd, spitzkbd, tosakbd driver -When: 2.6.35 -Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c -Why: We now have a generic GPIO based matrix keyboard driver that - are fully capable of handling all the keys on these devices. - The original drivers manipulate the GPIO registers directly - and so are difficult to maintain. -Who: Eric Miao <eric.y.miao@gmail.com> - ----------------------------- - -What: corgi_ssp and corgi_ts driver -When: 2.6.35 -Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c -Why: The corgi touchscreen is now deprecated in favour of the generic - ads7846.c driver. The noise reduction technique used in corgi_ts.c, - that's to wait till vsync before ADC sampling, is also integrated into - ads7846 driver now. Provided that the original driver is not generic - and is difficult to maintain, it will be removed later. -Who: Eric Miao <eric.y.miao@gmail.com> - ----------------------------- - What: capifs When: February 2011 Files: drivers/isdn/capi/capifs.* @@ -564,6 +541,16 @@ Who: Avi Kivity <avi@redhat.com> ---------------------------- +What: xtime, wall_to_monotonic +When: 2.6.36+ +Files: kernel/time/timekeeping.c include/linux/time.h +Why: Cleaning up timekeeping internal values. Please use + existing timekeeping accessor functions to access + the equivalent functionality. +Who: John Stultz <johnstul@us.ibm.com> + +---------------------------- + What: KVM kernel-allocated memory slots When: July 2010 Why: Since 2.6.25, kvm supports user-allocated memory slots, which are @@ -612,3 +599,13 @@ Why: The vtx device nodes have been superseded by vbi device nodes provided by the vtx API, then that functionality should be build around the sliced VBI API instead. Who: Hans Verkuil <hverkuil@xs4all.nl> + +---------------------------- + +What: IRQF_DISABLED +When: 2.6.36 +Why: The flag is a NOOP as we run interrupt handlers with interrupts disabled +Who: Thomas Gleixner <tglx@linutronix.de> + +---------------------------- + diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 06bbbed71206..af1608070cd5 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -178,7 +178,7 @@ prototypes: locking rules: All except set_page_dirty may block - BKL PageLocked(page) i_sem + BKL PageLocked(page) i_mutex writepage: no yes, unlocks (see below) readpage: no yes, unlocks sync_page: no maybe @@ -429,7 +429,7 @@ check_flags: no implementations. If your fs is not using generic_file_llseek, you need to acquire and release the appropriate locks in your ->llseek(). For many filesystems, it is probably safe to acquire the inode -semaphore. Note some filesystems (i.e. remote ones) provide no +mutex. Note some filesystems (i.e. remote ones) provide no protection for i_size so you will need to use the BKL. Note: ext2_release() was *the* source of contention on fs-intensive diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index 8f78ded4b648..51986bf08a4d 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -146,7 +146,7 @@ found to be inadequate, in this case. The Generic Netlink system was used for this as raw Netlink would lead to a significant increase in complexity. There's no question that the Generic Netlink system is an elegant solution for common case ioctl functions but it's not a complete -replacement probably because it's primary purpose in life is to be a +replacement probably because its primary purpose in life is to be a message bus implementation rather than specifically an ioctl replacement. While it would be possible to work around this there is one concern that lead to the decision to not use it. This is that the autofs diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt index 0660c9f5deef..763d8ebbbebd 100644 --- a/Documentation/filesystems/ceph.txt +++ b/Documentation/filesystems/ceph.txt @@ -90,7 +90,7 @@ Mount Options Specify the IP and/or port the client should bind to locally. There is normally not much reason to do this. If the IP is not specified, the client's IP address is determined by looking at the - address it's connection to the monitor originates from. + address its connection to the monitor originates from. wsize=X Specify the maximum write size in bytes. By default there is no diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index c50bbb2d52b4..1b528b2ad809 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -47,7 +47,7 @@ You'll want to start heartbeating on a volume which all the nodes in your lockspace can access. The easiest way to do this is via ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires that an OCFS2 file system be in place so that it can automatically -find it's heartbeat area, though it will eventually support heartbeat +find its heartbeat area, though it will eventually support heartbeat against raw disks. Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt index 606233cd4618..1b805a0efbb0 100644 --- a/Documentation/filesystems/fiemap.txt +++ b/Documentation/filesystems/fiemap.txt @@ -38,7 +38,7 @@ flags, it will return EBADR and the contents of fm_flags will contain the set of flags which caused the error. If the kernel is compatible with all flags passed, the contents of fm_flags will be unmodified. It is up to userspace to determine whether rejection of a particular -flag is fatal to it's operation. This scheme is intended to allow the +flag is fatal to its operation. This scheme is intended to allow the fiemap interface to grow in the future but without losing compatibility with old software. @@ -56,7 +56,7 @@ If this flag is set, the kernel will sync the file before mapping extents. * FIEMAP_FLAG_XATTR If this flag is set, the extents returned will describe the inodes -extended attribute lookup tree, instead of it's data tree. +extended attribute lookup tree, instead of its data tree. Extent Mapping @@ -89,7 +89,7 @@ struct fiemap_extent { }; All offsets and lengths are in bytes and mirror those on disk. It is valid -for an extents logical offset to start before the request or it's logical +for an extents logical offset to start before the request or its logical length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is returned, fe_logical, fe_physical, and fe_length will be aligned to the block size of the file system. With the exception of extents flagged as @@ -125,7 +125,7 @@ been allocated for the file yet. * FIEMAP_EXTENT_DELALLOC - This will also set FIEMAP_EXTENT_UNKNOWN. -Delayed allocation - while there is data for this extent, it's +Delayed allocation - while there is data for this extent, its physical location has not been allocated yet. * FIEMAP_EXTENT_ENCODED @@ -159,7 +159,7 @@ Data is located within a meta data block. Data is packed into a block with data from other files. * FIEMAP_EXTENT_UNWRITTEN -Unwritten extent - the extent is allocated but it's data has not been +Unwritten extent - the extent is allocated but its data has not been initialized. This indicates the extent's data will be all zero if read through the filesystem but the contents are undefined if read directly from the device. @@ -176,7 +176,7 @@ VFS -> File System Implementation File systems wishing to support fiemap must implement a ->fiemap callback on their inode_operations structure. The fs ->fiemap call is responsible for -defining it's set of supported fiemap flags, and calling a helper function on +defining its set of supported fiemap flags, and calling a helper function on each discovered extent: struct inode_operations { diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt index 397a41adb4c3..13af4a49e7db 100644 --- a/Documentation/filesystems/fuse.txt +++ b/Documentation/filesystems/fuse.txt @@ -91,7 +91,7 @@ Mount options 'default_permissions' By default FUSE doesn't check file access permissions, the - filesystem is free to implement it's access policy or leave it to + filesystem is free to implement its access policy or leave it to the underlying file access mechanism (e.g. in case of network filesystems). This option enables permission checking, restricting access based on file mode. It is usually useful together with the @@ -171,7 +171,7 @@ or may honor them by sending a reply to the _original_ request, with the error set to EINTR. It is also possible that there's a race between processing the -original request and it's INTERRUPT request. There are two possibilities: +original request and its INTERRUPT request. There are two possibilities: 1) The INTERRUPT request is processed before the original request is processed diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.txt index fa45c3baed98..74630bd504fb 100644 --- a/Documentation/filesystems/hpfs.txt +++ b/Documentation/filesystems/hpfs.txt @@ -103,7 +103,7 @@ to analyze or change OS2SYS.INI. Codepages HPFS can contain several uppercasing tables for several codepages and each -file has a pointer to codepage it's name is in. However OS/2 was created in +file has a pointer to codepage its name is in. However OS/2 was created in America where people don't care much about codepages and so multiple codepages support is quite buggy. I have Czech OS/2 working in codepage 852 on my disk. Once I booted English OS/2 working in cp 850 and I created a file on my 852 diff --git a/Documentation/filesystems/logfs.txt b/Documentation/filesystems/logfs.txt index e64c94ba401a..bca42c22a143 100644 --- a/Documentation/filesystems/logfs.txt +++ b/Documentation/filesystems/logfs.txt @@ -59,7 +59,7 @@ Levels ------ Garbage collection (GC) may fail if all data is written -indiscriminately. One requirement of GC is that data is seperated +indiscriminately. One requirement of GC is that data is separated roughly according to the distance between the tree root and the data. Effectively that means all file data is on level 0, indirect blocks are on levels 1, 2, 3 4 or 5 for 1x, 2x, 3x, 4x or 5x indirect blocks, @@ -67,7 +67,7 @@ respectively. Inode file data is on level 6 for the inodes and 7-11 for indirect blocks. Each segment contains objects of a single level only. As a result, -each level requires its own seperate segment to be open for writing. +each level requires its own separate segment to be open for writing. Inode File ---------- @@ -106,9 +106,9 @@ Vim --- By cleverly predicting the life time of data, it is possible to -seperate long-living data from short-living data and thereby reduce +separate long-living data from short-living data and thereby reduce the GC overhead later. Each type of distinc life expectency (vim) can -have a seperate segment open for writing. Each (level, vim) tupel can +have a separate segment open for writing. Each (level, vim) tupel can be open just once. If an open segment with unknown vim is encountered at mount time, it is closed and ignored henceforth. diff --git a/Documentation/filesystems/nfs/nfs41-server.txt b/Documentation/filesystems/nfs/nfs41-server.txt index 6a53a84afc72..04884914a1c8 100644 --- a/Documentation/filesystems/nfs/nfs41-server.txt +++ b/Documentation/filesystems/nfs/nfs41-server.txt @@ -137,7 +137,7 @@ NS*| OPENATTR | OPT | | Section 18.17 | | READ | REQ | | Section 18.22 | | READDIR | REQ | | Section 18.23 | | READLINK | OPT | | Section 18.24 | -NS | RECLAIM_COMPLETE | REQ | | Section 18.51 | + | RECLAIM_COMPLETE | REQ | | Section 18.51 | | RELEASE_LOCKOWNER | MNI | | N/A | | REMOVE | REQ | | Section 18.25 | | RENAME | REQ | | Section 18.26 | diff --git a/Documentation/filesystems/nfs/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt index 8a382bea6808..ebcaaee21616 100644 --- a/Documentation/filesystems/nfs/rpc-cache.txt +++ b/Documentation/filesystems/nfs/rpc-cache.txt @@ -185,7 +185,7 @@ failed lookup meant a definite 'no'. request/response format ----------------------- -While each cache is free to use it's own format for requests +While each cache is free to use its own format for requests and responses over channel, the following is recommended as appropriate and support routines are available to help: Each request or response record should be printable ASCII diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index a4f30faa4f1f..9fb6cbe70bde 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -305,7 +305,7 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7) cgtime guest time of the task children in jiffies .............................................................................. -The /proc/PID/map file containing the currently mapped memory regions and +The /proc/PID/maps file containing the currently mapped memory regions and their access permissions. The format is: @@ -316,7 +316,7 @@ address perms offset dev inode pathname 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] a7cb1000-a7cb2000 ---p 00000000 00:00 0 -a7cb2000-a7eb2000 rw-p 00000000 00:00 0 [threadstack:001ff4b4] +a7cb2000-a7eb2000 rw-p 00000000 00:00 0 a7eb2000-a7eb3000 ---p 00000000 00:00 0 a7eb3000-a7ed5000 rw-p 00000000 00:00 0 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 @@ -352,7 +352,6 @@ is not associated with a file: [stack] = the stack of the main process [vdso] = the "virtual dynamic shared object", the kernel system call handler - [threadstack:xxxxxxxx] = the stack of the thread, xxxxxxxx is the stack size or if empty, the mapping is anonymous. @@ -566,6 +565,10 @@ The default_smp_affinity mask applies to all non-active IRQs, which are the IRQs which have not yet been allocated/activated, and hence which lack a /proc/irq/[0-9]* directory. +The node file on an SMP system shows the node to which the device using the IRQ +reports itself as being attached. This hardware locality information does not +include information about any possible driver locality preference. + prof_cpu_mask specifies which CPUs are to be profiled by the system wide profiler. Default value is ffffffff (all cpus). @@ -965,7 +968,7 @@ your system and how much traffic was routed over those devices: ...] 1375103 17405 0 0 0 0 0 0 ...] 1703981 5535 0 0 0 3 0 0 -In addition, each Channel Bond interface has it's own directory. For +In addition, each Channel Bond interface has its own directory. For example, the bond0 device will have a directory called /proc/net/bond0/. It will contain information that is specific to that bond, such as the current slaves of the bond, the link status of the slaves, and how @@ -1362,7 +1365,7 @@ been accounted as having caused 1MB of write. In other words: The number of bytes which this process caused to not happen, by truncating pagecache. A task can cause "negative" IO too. If this task truncates some dirty pagecache, some IO which another task has been accounted -for (in it's write_bytes) will not be happening. We _could_ just subtract that +for (in its write_bytes) will not be happening. We _could_ just subtract that from the truncating task's write_bytes, but there is information loss in doing that. diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt index f673ef0de0f7..194fb0decd2c 100644 --- a/Documentation/filesystems/smbfs.txt +++ b/Documentation/filesystems/smbfs.txt @@ -3,6 +3,6 @@ protocol used by Windows for Workgroups, Windows 95 and Windows NT. Smbfs was inspired by Samba, the program written by Andrew Tridgell that turns any Unix host into a file server for DOS or Windows clients. -Smbfs is a SMB client, but uses parts of samba for it's operation. For +Smbfs is a SMB client, but uses parts of samba for its operation. For more info on samba, including documentation, please go to http://www.samba.org/ and then on to your nearest mirror. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 3de2f32edd90..b66858538df5 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -72,7 +72,7 @@ structure (this is the kernel-side implementation of file descriptors). The freshly allocated file structure is initialized with a pointer to the dentry and a set of file operation member functions. These are taken from the inode data. The open() file method is then -called so the specific filesystem implementation can do it's work. You +called so the specific filesystem implementation can do its work. You can see that this is another switch performed by the VFS. The file structure is placed into the file descriptor table for the process. diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index a13680871bc7..a76aefeeb68a 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -157,7 +157,7 @@ temperature configuration points: There are three PWM outputs. The LM85 datasheet suggests that the pwm3 output control both fan3 and fan4. Each PWM can be individually -configured and assigned to a zone for it's control value. Each PWM can be +configured and assigned to a zone for its control value. Each PWM can be configured individually according to the following options. * pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 154d767b2acb..8007b7ca87bf 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -402,7 +402,7 @@ for the port of the SoundFusion is supported by the cs461x.c module. ~~~~~~~~~~~~~~~~~~~~~~~~ The Live! has a special PCI gameport, which, although it doesn't provide any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than -it's ISA counterparts. It also requires special support, hence the +its ISA counterparts. It also requires special support, hence the emu10k1-gp.c module for it instead of the normal ns558.c one. 3.15 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt index f40a1f030019..5dc59b04a71f 100644 --- a/Documentation/intel_txt.txt +++ b/Documentation/intel_txt.txt @@ -126,7 +126,7 @@ o Tboot then applies an (optional) user-defined launch policy to o Tboot adjusts the e820 table provided by the bootloader to reserve its own location in memory as well as to reserve certain other TXT-related regions. -o As part of it's launch, tboot DMA protects all of RAM (using the +o As part of its launch, tboot DMA protects all of RAM (using the VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on' in order to remove this blanket protection and use VT-d's page-level protection. @@ -161,13 +161,15 @@ o In order to put a system into any of the sleep states after a TXT has been restored, it will restore the TPM PCRs and then transfer control back to the kernel's S3 resume vector. In order to preserve system integrity across S3, the kernel - provides tboot with a set of memory ranges (kernel - code/data/bss, S3 resume code, and AP trampoline) that tboot - will calculate a MAC (message authentication code) over and then - seal with the TPM. On resume and once the measured environment - has been re-established, tboot will re-calculate the MAC and - verify it against the sealed value. Tboot's policy determines - what happens if the verification fails. + provides tboot with a set of memory ranges (RAM and RESERVED_KERN + in the e820 table, but not any memory that BIOS might alter over + the S3 transition) that tboot will calculate a MAC (message + authentication code) over and then seal with the TPM. On resume + and once the measured environment has been re-established, tboot + will re-calculate the MAC and verify it against the sealed value. + Tboot's policy determines what happens if the verification fails. + Note that the c/s 194 of tboot which has the new MAC code supports + this. That's pretty much it for TXT support. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index c412c245848f..b472e4e0ba67 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -181,7 +181,7 @@ Expressions are listed in decreasing order of precedence. (7) Returns the result of max(/expr/, /expr/). An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2 -respectively for calculations). A menu entry becomes visible when it's +respectively for calculations). A menu entry becomes visible when its expression evaluates to 'm' or 'y'. There are two types of symbols: constant and non-constant symbols. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 49efae703979..b2cb16ebcb16 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig' KCONFIG_NOSILENTUPDATE -------------------------------------------------- If this variable has a non-blank value, it prevents silent kernel -config udpates (requires explicit updates). +config updates (requires explicit updates). KCONFIG_AUTOCONFIG -------------------------------------------------- diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 28cdc2af2131..ec8d31ee12e0 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -116,7 +116,7 @@ Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza. URL: http://www.linuxjournal.com/article.php?sid=2391 Keywords: RAID, MD driver. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "A description of the implementation of the RAID-1, RAID-4 and RAID-5 personalities of the MD device driver in the Linux kernel, providing users with high performance and reliable, @@ -127,7 +127,7 @@ URL: http://www.linuxjournal.com/article.php?sid=1219 Keywords: device driver, module, loading/unloading modules, allocating resources. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This is the first of a series of four articles co-authored by Alessandro Rubini and Georg Zezchwitz which present a practical approach to writing Linux device drivers as kernel @@ -141,7 +141,7 @@ Keywords: character driver, init_module, clean_up module, autodetection, mayor number, minor number, file operations, open(), close(). - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This article, the second of four, introduces part of the actual code to create custom module implementing a character device driver. It describes the code for module initialization and @@ -152,7 +152,7 @@ URL: http://www.linuxjournal.com/article.php?sid=1221 Keywords: read(), write(), select(), ioctl(), blocking/non blocking mode, interrupt handler. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This article, the third of four on writing character device drivers, introduces concepts of reading, writing, and using ioctl-calls". @@ -161,7 +161,7 @@ Author: Alessandro Rubini and Georg v. Zezschwitz. URL: http://www.linuxjournal.com/article.php?sid=1222 Keywords: interrupts, irqs, DMA, bottom halves, task queues. - Description: Linux Journal Kernel Korner article. Here is it's + Description: Linux Journal Kernel Korner article. Here is its abstract: "This is the fourth in a series of articles about writing character device drivers as loadable kernel modules. This month, we further investigate the field of interrupt handling. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 839b21b0699a..b12bacd252fc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -99,6 +99,7 @@ parameter is applicable: SWSUSP Software suspend (hibernation) is enabled. SUSPEND System suspend states are enabled. FTRACE Function tracing enabled. + TPM TPM drivers are enabled. TS Appropriate touchscreen support is enabled. UMS USB Mass Storage support is enabled. USB USB support is enabled. @@ -151,6 +152,7 @@ and is between 256 and 4096 characters. It is defined in the file strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. rsdt -- prefer RSDT over (default) XSDT + copy_dsdt -- copy DSDT to memory See also Documentation/power/pm.txt, pci=noacpi @@ -324,6 +326,8 @@ and is between 256 and 4096 characters. It is defined in the file they are unmapped. Otherwise they are flushed before they will be reused, which is a lot of faster + off - do not initialize any AMD IOMMU found in + the system amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT @@ -784,8 +788,12 @@ and is between 256 and 4096 characters. It is defined in the file as early as possible in order to facilitate early boot debugging. - ftrace_dump_on_oops + ftrace_dump_on_oops[=orig_cpu] [FTRACE] will dump the trace buffers on oops. + If no parameter is passed, ftrace will dump + buffers of all CPUs, but if you pass orig_cpu, it will + dump only the buffer of the CPU that triggered the + oops. ftrace_filter=[function-list] [FTRACE] Limit the functions traced by the function @@ -2610,6 +2618,15 @@ and is between 256 and 4096 characters. It is defined in the file tp720= [HW,PS2] + tpm_suspend_pcr=[HW,TPM] + Format: integer pcr id + Specify that at suspend time, the tpm driver + should extend the specified pcr with zeros, + as a workaround for some chips which fail to + flush the last written pcr on TPM_SaveState. + This will guarantee that all the other pcrs + are saved. + trace_buf_size=nn[KMG] [FTRACE] will set tracing buffer size. diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 2f9115c0ae62..6653017680dd 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -165,8 +165,8 @@ the user entry_handler invocation is also skipped. 1.4 How Does Jump Optimization Work? -If you configured your kernel with CONFIG_OPTPROBES=y (currently -this option is supported on x86/x86-64, non-preemptive kernel) and +If your kernel is built with CONFIG_OPTPROBES=y (currently this flag +is automatically set 'y' on x86/x86-64, non-preemptive kernel) and the "debug.kprobes_optimization" kernel parameter is set to 1 (see sysctl(8)), Kprobes tries to reduce probe-hit overhead by using a jump instruction instead of a breakpoint instruction at each probepoint. @@ -271,8 +271,6 @@ tweak the kernel's execution path, you need to suppress optimization, using one of the following techniques: - Specify an empty function for the kprobe's post_handler or break_handler. or -- Config CONFIG_OPTPROBES=n. - or - Execute 'sysctl -w debug.kprobes_optimization=n' 2. Architectures Supported @@ -307,10 +305,6 @@ it useful to "Compile the kernel with debug info" (CONFIG_DEBUG_INFO), so you can use "objdump -d -l vmlinux" to see the source-to-object code mapping. -If you want to reduce probing overhead, set "Kprobes jump optimization -support" (CONFIG_OPTPROBES) to "y". You can find this option under the -"Kprobes" line. - 4. API Reference The Kprobes API includes a "register" function and an "unregister" @@ -332,7 +326,7 @@ occurs during execution of kp->pre_handler or kp->post_handler, or during single-stepping of the probed instruction, Kprobes calls kp->fault_handler. Any or all handlers can be NULL. If kp->flags is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled, -so, it's handlers aren't hit until calling enable_kprobe(kp). +so, its handlers aren't hit until calling enable_kprobe(kp). NOTE: 1. With the introduction of the "symbol_name" field to struct kprobe, diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt index 2c3c35093023..0bf25eebce94 100644 --- a/Documentation/laptops/laptop-mode.txt +++ b/Documentation/laptops/laptop-mode.txt @@ -207,7 +207,7 @@ Tips & Tricks * Drew Scott Daniels observed: "I don't know why, but when I decrease the number of colours that my display uses it consumes less battery power. I've seen this on powerbooks too. I hope that this is a piece of information that - might be useful to the Laptop Mode patch or it's users." + might be useful to the Laptop Mode patch or its users." * In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the file after every logging. When you're using laptop-mode and your disk doesn't diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 3119f5db75bd..e9ce3c554514 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -263,7 +263,7 @@ static u8 *get_feature_bits(struct device *dev) * Launcher virtual with an offset. * * This can be tough to get your head around, but usually it just means that we - * use these trivial conversion functions when the Guest gives us it's + * use these trivial conversion functions when the Guest gives us its * "physical" addresses: */ static void *from_guest_phys(unsigned long addr) diff --git a/Documentation/md.txt b/Documentation/md.txt index 188f4768f1d5..e4e893ef3e01 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -136,7 +136,7 @@ raid_disks != 0. Then uninitialized devices can be added with ADD_NEW_DISK. The structure passed to ADD_NEW_DISK must specify the state of the device -and it's role in the array. +and its role in the array. Once started with RUN_ARRAY, uninitialized spares can be added with HOT_ADD_DISK. diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt index 98dd9f7430f2..638c74f7de7f 100644 --- a/Documentation/netlabel/lsm_interface.txt +++ b/Documentation/netlabel/lsm_interface.txt @@ -38,7 +38,7 @@ Depending on the exact configuration, translation between the network packet label and the internal LSM security identifier can be time consuming. The NetLabel label mapping cache is a caching mechanism which can be used to sidestep much of this overhead once a mapping has been established. Once the -LSM has received a packet, used NetLabel to decode it's security attributes, +LSM has received a packet, used NetLabel to decode its security attributes, and translated the security attributes into a LSM internal identifier the LSM can use the NetLabel caching functions to associate the LSM internal identifier with the network packet's label. This means that in the future diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index 1b96ccda3836..2bac9618c345 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -756,7 +756,7 @@ static int enslave(char *master_ifname, char *slave_ifname) */ if (abi_ver < 1) { /* For old ABI, the master needs to be - * down before setting it's hwaddr + * down before setting its hwaddr */ res = set_if_down(master_ifname, master_flags.ifr_flags); if (res) { diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 09ab0d290326..98f71a5cef00 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -100,7 +100,7 @@ by the kernel. The destruction of the socket and all associated resources is done by a simple call to close(fd). -Next I will describe PACKET_MMAP settings and it's constraints, +Next I will describe PACKET_MMAP settings and its constraints, also the mapping of the circular buffer in the user process and the use of this buffer. @@ -432,7 +432,7 @@ TP_STATUS_LOSING : indicates there were packet drops from last time the PACKET_STATISTICS option. TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which - it's checksum will be done in hardware. So while + its checksum will be done in hardware. So while reading the packet we should not try to check the checksum. diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 446f43b309df..61bc4e943116 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,17 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* No dev_node_t (as of 2.6.35) + There is no more need to fill out a "dev_node_t" structure. + +* New IRQ request rules (as of 2.6.35) + Instead of the old pcmcia_request_irq() interface, drivers may now + choose between: + - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. + - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will + clean up automatically on calls to pcmcia_disable_device() or + device ejection. + - drivers still not capable of IRQF_SHARED (or not telling us so) may + use the deprecated pcmcia_request_exclusive_irq() for the time + being; they might receive a shared IRQ nonetheless. * no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33) Instead of the cs_error() callback or the CS_CHECK() macro, please use diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index c9abbd86bc18..57080cd74575 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -1,7 +1,13 @@ +Device Power Management + +Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. +Copyright (c) 2010 Alan Stern <stern@rowland.harvard.edu> + + Most of the code in Linux is device drivers, so most of the Linux power -management code is also driver-specific. Most drivers will do very little; -others, especially for platforms with small batteries (like cell phones), -will do a lot. +management (PM) code is also driver-specific. Most drivers will do very +little; others, especially for platforms with small batteries (like cell +phones), will do a lot. This writeup gives an overview of how drivers interact with system-wide power management goals, emphasizing the models and interfaces that are @@ -15,9 +21,10 @@ Drivers will use one or both of these models to put devices into low-power states: System Sleep model: - Drivers can enter low power states as part of entering system-wide - low-power states like "suspend-to-ram", or (mostly for systems with - disks) "hibernate" (suspend-to-disk). + Drivers can enter low-power states as part of entering system-wide + low-power states like "suspend" (also known as "suspend-to-RAM"), or + (mostly for systems with disks) "hibernation" (also known as + "suspend-to-disk"). This is something that device, bus, and class drivers collaborate on by implementing various role-specific suspend and resume methods to @@ -25,33 +32,41 @@ states: them without loss of data. Some drivers can manage hardware wakeup events, which make the system - leave that low-power state. This feature may be disabled using the - relevant /sys/devices/.../power/wakeup file; enabling it may cost some - power usage, but let the whole system enter low power states more often. + leave the low-power state. This feature may be enabled or disabled + using the relevant /sys/devices/.../power/wakeup file (for Ethernet + drivers the ioctl interface used by ethtool may also be used for this + purpose); enabling it may cost some power usage, but let the whole + system enter low-power states more often. Runtime Power Management model: - Drivers may also enter low power states while the system is running, - independently of other power management activity. Upstream drivers - will normally not know (or care) if the device is in some low power - state when issuing requests; the driver will auto-resume anything - that's needed when it gets a request. - - This doesn't have, or need much infrastructure; it's just something you - should do when writing your drivers. For example, clk_disable() unused - clocks as part of minimizing power drain for currently-unused hardware. - Of course, sometimes clusters of drivers will collaborate with each - other, which could involve task-specific power management. - -There's not a lot to be said about those low power states except that they -are very system-specific, and often device-specific. Also, that if enough -drivers put themselves into low power states (at "runtime"), the effect may be -the same as entering some system-wide low-power state (system sleep) ... and -that synergies exist, so that several drivers using runtime pm might put the -system into a state where even deeper power saving options are available. - -Most suspended devices will have quiesced all I/O: no more DMA or irqs, no -more data read or written, and requests from upstream drivers are no longer -accepted. A given bus or platform may have different requirements though. + Devices may also be put into low-power states while the system is + running, independently of other power management activity in principle. + However, devices are not generally independent of each other (for + example, a parent device cannot be suspended unless all of its child + devices have been suspended). Moreover, depending on the bus type the + device is on, it may be necessary to carry out some bus-specific + operations on the device for this purpose. Devices put into low power + states at run time may require special handling during system-wide power + transitions (suspend or hibernation). + + For these reasons not only the device driver itself, but also the + appropriate subsystem (bus type, device type or device class) driver and + the PM core are involved in runtime power management. As in the system + sleep power management case, they need to collaborate by implementing + various role-specific suspend and resume methods, so that the hardware + is cleanly powered down and reactivated without data or service loss. + +There's not a lot to be said about those low-power states except that they are +very system-specific, and often device-specific. Also, that if enough devices +have been put into low-power states (at runtime), the effect may be very similar +to entering some system-wide low-power state (system sleep) ... and that +synergies exist, so that several drivers using runtime PM might put the system +into a state where even deeper power saving options are available. + +Most suspended devices will have quiesced all I/O: no more DMA or IRQs (except +for wakeup events), no more data read or written, and requests from upstream +drivers are no longer accepted. A given bus or platform may have different +requirements though. Examples of hardware wakeup events include an alarm from a real time clock, network wake-on-LAN packets, keyboard or mouse activity, and media insertion @@ -60,129 +75,152 @@ or removal (for PCMCIA, MMC/SD, USB, and so on). Interfaces for Entering System Sleep States =========================================== -Most of the programming interfaces a device driver needs to know about -relate to that first model: entering a system-wide low power state, -rather than just minimizing power consumption by one device. - - -Bus Driver Methods ------------------- -The core methods to suspend and resume devices reside in struct bus_type. -These are mostly of interest to people writing infrastructure for busses -like PCI or USB, or because they define the primitives that device drivers -may need to apply in domain-specific ways to their devices: - -struct bus_type { - ... - int (*suspend)(struct device *dev, pm_message_t state); - int (*resume)(struct device *dev); +There are programming interfaces provided for subsystems (bus type, device type, +device class) and device drivers to allow them to participate in the power +management of devices they are concerned with. These interfaces cover both +system sleep and runtime power management. + + +Device Power Management Operations +---------------------------------- +Device power management operations, at the subsystem level as well as at the +device driver level, are implemented by defining and populating objects of type +struct dev_pm_ops: + +struct dev_pm_ops { + int (*prepare)(struct device *dev); + void (*complete)(struct device *dev); + int (*suspend)(struct device *dev); + int (*resume)(struct device *dev); + int (*freeze)(struct device *dev); + int (*thaw)(struct device *dev); + int (*poweroff)(struct device *dev); + int (*restore)(struct device *dev); + int (*suspend_noirq)(struct device *dev); + int (*resume_noirq)(struct device *dev); + int (*freeze_noirq)(struct device *dev); + int (*thaw_noirq)(struct device *dev); + int (*poweroff_noirq)(struct device *dev); + int (*restore_noirq)(struct device *dev); + int (*runtime_suspend)(struct device *dev); + int (*runtime_resume)(struct device *dev); + int (*runtime_idle)(struct device *dev); }; -Bus drivers implement those methods as appropriate for the hardware and -the drivers using it; PCI works differently from USB, and so on. Not many -people write bus drivers; most driver code is a "device driver" that -builds on top of bus-specific framework code. +This structure is defined in include/linux/pm.h and the methods included in it +are also described in that file. Their roles will be explained in what follows. +For now, it should be sufficient to remember that the last three methods are +specific to runtime power management while the remaining ones are used during +system-wide power transitions. -For more information on these driver calls, see the description later; -they are called in phases for every device, respecting the parent-child -sequencing in the driver model tree. Note that as this is being written, -only the suspend() and resume() are widely available; not many bus drivers -leverage all of those phases, or pass them down to lower driver levels. +There also is a deprecated "old" or "legacy" interface for power management +operations available at least for some subsystems. This approach does not use +struct dev_pm_ops objects and it is suitable only for implementing system sleep +power management methods. Therefore it is not described in this document, so +please refer directly to the source code for more information about it. -/sys/devices/.../power/wakeup files ------------------------------------ -All devices in the driver model have two flags to control handling of -wakeup events, which are hardware signals that can force the device and/or -system out of a low power state. These are initialized by bus or device -driver code using device_init_wakeup(dev,can_wakeup). +Subsystem-Level Methods +----------------------- +The core methods to suspend and resume devices reside in struct dev_pm_ops +pointed to by the pm member of struct bus_type, struct device_type and +struct class. They are mostly of interest to the people writing infrastructure +for buses, like PCI or USB, or device type and device class drivers. -The "can_wakeup" flag just records whether the device (and its driver) can -physically support wakeup events. When that flag is clear, the sysfs -"wakeup" file is empty, and device_may_wakeup() returns false. +Bus drivers implement these methods as appropriate for the hardware and the +drivers using it; PCI works differently from USB, and so on. Not many people +write subsystem-level drivers; most driver code is a "device driver" that builds +on top of bus-specific framework code. -For devices that can issue wakeup events, a separate flag controls whether -that device should try to use its wakeup mechanism. The initial value of -device_may_wakeup() will be true, so that the device's "wakeup" file holds -the value "enabled". Userspace can change that to "disabled" so that -device_may_wakeup() returns false; or change it back to "enabled" (so that -it returns true again). +For more information on these driver calls, see the description later; +they are called in phases for every device, respecting the parent-child +sequencing in the driver model tree. -EXAMPLE: PCI Device Driver Methods +/sys/devices/.../power/wakeup files ----------------------------------- -PCI framework software calls these methods when the PCI device driver bound -to a device device has provided them: - -struct pci_driver { - ... - int (*suspend)(struct pci_device *pdev, pm_message_t state); - int (*suspend_late)(struct pci_device *pdev, pm_message_t state); +All devices in the driver model have two flags to control handling of wakeup +events (hardware signals that can force the device and/or system out of a low +power state). These flags are initialized by bus or device driver code using +device_set_wakeup_capable() and device_set_wakeup_enable(), defined in +include/linux/pm_wakeup.h. - int (*resume_early)(struct pci_device *pdev); - int (*resume)(struct pci_device *pdev); -}; - -Drivers will implement those methods, and call PCI-specific procedures -like pci_set_power_state(), pci_enable_wake(), pci_save_state(), and -pci_restore_state() to manage PCI-specific mechanisms. (PCI config space -could be saved during driver probe, if it weren't for the fact that some -systems rely on userspace tweaking using setpci.) Devices are suspended -before their bridges enter low power states, and likewise bridges resume -before their devices. - - -Upper Layers of Driver Stacks ------------------------------ -Device drivers generally have at least two interfaces, and the methods -sketched above are the ones which apply to the lower level (nearer PCI, USB, -or other bus hardware). The network and block layers are examples of upper -level interfaces, as is a character device talking to userspace. - -Power management requests normally need to flow through those upper levels, -which often use domain-oriented requests like "blank that screen". In -some cases those upper levels will have power management intelligence that -relates to end-user activity, or other devices that work in cooperation. - -When those interfaces are structured using class interfaces, there is a -standard way to have the upper layer stop issuing requests to a given -class device (and restart later): - -struct class { - ... - int (*suspend)(struct device *dev, pm_message_t state); - int (*resume)(struct device *dev); -}; - -Those calls are issued in specific phases of the process by which the -system enters a low power "suspend" state, or resumes from it. - - -Calling Drivers to Enter System Sleep States -============================================ -When the system enters a low power state, each device's driver is asked -to suspend the device by putting it into state compatible with the target +The "can_wakeup" flag just records whether the device (and its driver) can +physically support wakeup events. The device_set_wakeup_capable() routine +affects this flag. The "should_wakeup" flag controls whether the device should +try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag; +for the most part drivers should not change its value. The initial value of +should_wakeup is supposed to be false for the majority of devices; the major +exceptions are power buttons, keyboards, and Ethernet adapters whose WoL +(wake-on-LAN) feature has been set up with ethtool. + +Whether or not a device is capable of issuing wakeup events is a hardware +matter, and the kernel is responsible for keeping track of it. By contrast, +whether or not a wakeup-capable device should issue wakeup events is a policy +decision, and it is managed by user space through a sysfs attribute: the +power/wakeup file. User space can write the strings "enabled" or "disabled" to +set or clear the should_wakeup flag, respectively. Reads from the file will +return the corresponding string if can_wakeup is true, but if can_wakeup is +false then reads will return an empty string, to indicate that the device +doesn't support wakeup events. (But even though the file appears empty, writes +will still affect the should_wakeup flag.) + +The device_may_wakeup() routine returns true only if both flags are set. +Drivers should check this routine when putting devices in a low-power state +during a system sleep transition, to see whether or not to enable the devices' +wakeup mechanisms. However for runtime power management, wakeup events should +be enabled whenever the device and driver both support them, regardless of the +should_wakeup flag. + + +/sys/devices/.../power/control files +------------------------------------ +Each device in the driver model has a flag to control whether it is subject to +runtime power management. This flag, called runtime_auto, is initialized by the +bus type (or generally subsystem) code using pm_runtime_allow() or +pm_runtime_forbid(); the default is to allow runtime power management. + +The setting can be adjusted by user space by writing either "on" or "auto" to +the device's power/control sysfs file. Writing "auto" calls pm_runtime_allow(), +setting the flag and allowing the device to be runtime power-managed by its +driver. Writing "on" calls pm_runtime_forbid(), clearing the flag, returning +the device to full power if it was in a low-power state, and preventing the +device from being runtime power-managed. User space can check the current value +of the runtime_auto flag by reading the file. + +The device's runtime_auto flag has no effect on the handling of system-wide +power transitions. In particular, the device can (and in the majority of cases +should and will) be put into a low-power state during a system-wide transition +to a sleep state even though its runtime_auto flag is clear. + +For more information about the runtime power management framework, refer to +Documentation/power/runtime_pm.txt. + + +Calling Drivers to Enter and Leave System Sleep States +====================================================== +When the system goes into a sleep state, each device's driver is asked to +suspend the device by putting it into a state compatible with the target system state. That's usually some version of "off", but the details are system-specific. Also, wakeup-enabled devices will usually stay partly functional in order to wake the system. -When the system leaves that low power state, the device's driver is asked -to resume it. The suspend and resume operations always go together, and -both are multi-phase operations. +When the system leaves that low-power state, the device's driver is asked to +resume it by returning it to full power. The suspend and resume operations +always go together, and both are multi-phase operations. -For simple drivers, suspend might quiesce the device using the class code -and then turn its hardware as "off" as possible with late_suspend. The +For simple drivers, suspend might quiesce the device using class code +and then turn its hardware as "off" as possible during suspend_noirq. The matching resume calls would then completely reinitialize the hardware before reactivating its class I/O queues. -More power-aware drivers drivers will use more than one device low power -state, either at runtime or during system sleep states, and might trigger -system wakeup events. +More power-aware drivers might prepare the devices for triggering system wakeup +events. Call Sequence Guarantees ------------------------ -To ensure that bridges and similar links needed to talk to a device are +To ensure that bridges and similar links needing to talk to a device are available when the device is suspended or resumed, the device tree is walked in a bottom-up order to suspend devices. A top-down order is used to resume those devices. @@ -194,67 +232,310 @@ its parent; and can't be removed or suspended after that parent. The policy is that the device tree should match hardware bus topology. (Or at least the control bus, for devices which use multiple busses.) In particular, this means that a device registration may fail if the parent of -the device is suspending (ie. has been chosen by the PM core as the next +the device is suspending (i.e. has been chosen by the PM core as the next device to suspend) or has already suspended, as well as after all of the other devices have been suspended. Device drivers must be prepared to cope with such situations. -Suspending Devices ------------------- -Suspending a given device is done in several phases. Suspending the -system always includes every phase, executing calls for every device -before the next phase begins. Not all busses or classes support all -these callbacks; and not all drivers use all the callbacks. +System Power Management Phases +------------------------------ +Suspending or resuming the system is done in several phases. Different phases +are used for standby or memory sleep states ("suspend-to-RAM") and the +hibernation state ("suspend-to-disk"). Each phase involves executing callbacks +for every device before the next phase begins. Not all busses or classes +support all these callbacks and not all drivers use all the callbacks. The +various phases always run after tasks have been frozen and before they are +unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have +been disabled (except for those marked with the IRQ_WAKEUP flag). -The phases are seen by driver notifications issued in this order: +Most phases use bus, type, and class callbacks (that is, methods defined in +dev->bus->pm, dev->type->pm, and dev->class->pm). The prepare and complete +phases are exceptions; they use only bus callbacks. When multiple callbacks +are used in a phase, they are invoked in the order: <class, type, bus> during +power-down transitions and in the opposite order during power-up transitions. +For example, during the suspend phase the PM core invokes - 1 class.suspend(dev, message) is called after tasks are frozen, for - devices associated with a class that has such a method. This - method may sleep. + dev->class->pm.suspend(dev); + dev->type->pm.suspend(dev); + dev->bus->pm.suspend(dev); - Since I/O activity usually comes from such higher layers, this is - a good place to quiesce all drivers of a given type (and keep such - code out of those drivers). +before moving on to the next device, whereas during the resume phase the core +invokes - 2 bus.suspend(dev, message) is called next. This method may sleep, - and is often morphed into a device driver call with bus-specific - parameters and/or rules. + dev->bus->pm.resume(dev); + dev->type->pm.resume(dev); + dev->class->pm.resume(dev); - This call should handle parts of device suspend logic that require - sleeping. It probably does work to quiesce the device which hasn't - been abstracted into class.suspend(). +These callbacks may in turn invoke device- or driver-specific methods stored in +dev->driver->pm, but they don't have to. -The pm_message_t parameter is currently used to refine those semantics -(described later). -At the end of those phases, drivers should normally have stopped all I/O -transactions (DMA, IRQs), saved enough state that they can re-initialize -or restore previous state (as needed by the hardware), and placed the -device into a low-power state. On many platforms they will also use -clk_disable() to gate off one or more clock sources; sometimes they will -also switch off power supplies, or reduce voltages. Drivers which have -runtime PM support may already have performed some or all of the steps -needed to prepare for the upcoming system sleep state. +Entering System Suspend +----------------------- +When the system goes into the standby or memory sleep state, the phases are: + + prepare, suspend, suspend_noirq. + + 1. The prepare phase is meant to prevent races by preventing new devices + from being registered; the PM core would never know that all the + children of a device had been suspended if new children could be + registered at will. (By contrast, devices may be unregistered at any + time.) Unlike the other suspend-related phases, during the prepare + phase the device tree is traversed top-down. + + The prepare phase uses only a bus callback. After the callback method + returns, no new children may be registered below the device. The method + may also prepare the device or driver in some way for the upcoming + system power transition, but it should not put the device into a + low-power state. + + 2. The suspend methods should quiesce the device to stop it from performing + I/O. They also may save the device registers and put it into the + appropriate low-power state, depending on the bus type the device is on, + and they may enable wakeup events. + + 3. The suspend_noirq phase occurs after IRQ handlers have been disabled, + which means that the driver's interrupt handler will not be called while + the callback method is running. The methods should save the values of + the device's registers that weren't saved previously and finally put the + device into the appropriate low-power state. + + The majority of subsystems and device drivers need not implement this + callback. However, bus types allowing devices to share interrupt + vectors, like PCI, generally need it; otherwise a driver might encounter + an error during the suspend phase by fielding a shared interrupt + generated by some other device after its own device had been set to low + power. + +At the end of these phases, drivers should have stopped all I/O transactions +(DMA, IRQs), saved enough state that they can re-initialize or restore previous +state (as needed by the hardware), and placed the device into a low-power state. +On many platforms they will gate off one or more clock sources; sometimes they +will also switch off power supplies or reduce voltages. (Drivers supporting +runtime PM may already have performed some or all of these steps.) + +If device_may_wakeup(dev) returns true, the device should be prepared for +generating hardware wakeup signals to trigger a system wakeup event when the +system is in the sleep state. For example, enable_irq_wake() might identify +GPIO signals hooked up to a switch or other external hardware, and +pci_enable_wake() does something similar for the PCI PME signal. + +If any of these callbacks returns an error, the system won't enter the desired +low-power state. Instead the PM core will unwind its actions by resuming all +the devices that were suspended. + + +Leaving System Suspend +---------------------- +When resuming from standby or memory sleep, the phases are: + + resume_noirq, resume, complete. + + 1. The resume_noirq callback methods should perform any actions needed + before the driver's interrupt handlers are invoked. This generally + means undoing the actions of the suspend_noirq phase. If the bus type + permits devices to share interrupt vectors, like PCI, the method should + bring the device and its driver into a state in which the driver can + recognize if the device is the source of incoming interrupts, if any, + and handle them correctly. + + For example, the PCI bus type's ->pm.resume_noirq() puts the device into + the full-power state (D0 in the PCI terminology) and restores the + standard configuration registers of the device. Then it calls the + device driver's ->pm.resume_noirq() method to perform device-specific + actions. + + 2. The resume methods should bring the the device back to its operating + state, so that it can perform normal I/O. This generally involves + undoing the actions of the suspend phase. + + 3. The complete phase uses only a bus callback. The method should undo the + actions of the prepare phase. Note, however, that new children may be + registered below the device as soon as the resume callbacks occur; it's + not necessary to wait until the complete phase. + +At the end of these phases, drivers should be as functional as they were before +suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are +gated on. Even if the device was in a low-power state before the system sleep +because of runtime power management, afterwards it should be back in its +full-power state. There are multiple reasons why it's best to do this; they are +discussed in more detail in Documentation/power/runtime_pm.txt. -When any driver sees that its device_can_wakeup(dev), it should make sure -to use the relevant hardware signals to trigger a system wakeup event. -For example, enable_irq_wake() might identify GPIO signals hooked up to -a switch or other external hardware, and pci_enable_wake() does something -similar for PCI's PME# signal. +However, the details here may again be platform-specific. For example, +some systems support multiple "run" states, and the mode in effect at +the end of resume might not be the one which preceded suspension. +That means availability of certain clocks or power supplies changed, +which could easily affect how a driver works. + +Drivers need to be able to handle hardware which has been reset since the +suspend methods were called, for example by complete reinitialization. +This may be the hardest part, and the one most protected by NDA'd documents +and chip errata. It's simplest if the hardware state hasn't changed since +the suspend was carried out, but that can't be guaranteed (in fact, it ususally +is not the case). + +Drivers must also be prepared to notice that the device has been removed +while the system was powered down, whenever that's physically possible. +PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses +where common Linux platforms will see such removal. Details of how drivers +will notice and handle such removals are currently bus-specific, and often +involve a separate thread. + +These callbacks may return an error value, but the PM core will ignore such +errors since there's nothing it can do about them other than printing them in +the system log. + + +Entering Hibernation +-------------------- +Hibernating the system is more complicated than putting it into the standby or +memory sleep state, because it involves creating and saving a system image. +Therefore there are more phases for hibernation, with a different set of +callbacks. These phases always run after tasks have been frozen and memory has +been freed. + +The general procedure for hibernation is to quiesce all devices (freeze), create +an image of the system memory while everything is stable, reactivate all +devices (thaw), write the image to permanent storage, and finally shut down the +system (poweroff). The phases used to accomplish this are: + + prepare, freeze, freeze_noirq, thaw_noirq, thaw, complete, + prepare, poweroff, poweroff_noirq + + 1. The prepare phase is discussed in the "Entering System Suspend" section + above. + + 2. The freeze methods should quiesce the device so that it doesn't generate + IRQs or DMA, and they may need to save the values of device registers. + However the device does not have to be put in a low-power state, and to + save time it's best not to do so. Also, the device should not be + prepared to generate wakeup events. + + 3. The freeze_noirq phase is analogous to the suspend_noirq phase discussed + above, except again that the device should not be put in a low-power + state and should not be allowed to generate wakeup events. + +At this point the system image is created. All devices should be inactive and +the contents of memory should remain undisturbed while this happens, so that the +image forms an atomic snapshot of the system state. + + 4. The thaw_noirq phase is analogous to the resume_noirq phase discussed + above. The main difference is that its methods can assume the device is + in the same state as at the end of the freeze_noirq phase. + + 5. The thaw phase is analogous to the resume phase discussed above. Its + methods should bring the device back to an operating state, so that it + can be used for saving the image if necessary. + + 6. The complete phase is discussed in the "Leaving System Suspend" section + above. + +At this point the system image is saved, and the devices then need to be +prepared for the upcoming system shutdown. This is much like suspending them +before putting the system into the standby or memory sleep state, and the phases +are similar. + + 7. The prepare phase is discussed above. + + 8. The poweroff phase is analogous to the suspend phase. + + 9. The poweroff_noirq phase is analogous to the suspend_noirq phase. + +The poweroff and poweroff_noirq callbacks should do essentially the same things +as the suspend and suspend_noirq callbacks. The only notable difference is that +they need not store the device register values, because the registers should +already have been stored during the freeze or freeze_noirq phases. + + +Leaving Hibernation +------------------- +Resuming from hibernation is, again, more complicated than resuming from a sleep +state in which the contents of main memory are preserved, because it requires +a system image to be loaded into memory and the pre-hibernation memory contents +to be restored before control can be passed back to the image kernel. + +Although in principle, the image might be loaded into memory and the +pre-hibernation memory contents restored by the boot loader, in practice this +can't be done because boot loaders aren't smart enough and there is no +established protocol for passing the necessary information. So instead, the +boot loader loads a fresh instance of the kernel, called the boot kernel, into +memory and passes control to it in the usual way. Then the boot kernel reads +the system image, restores the pre-hibernation memory contents, and passes +control to the image kernel. Thus two different kernels are involved in +resuming from hibernation. In fact, the boot kernel may be completely different +from the image kernel: a different configuration and even a different version. +This has important consequences for device drivers and their subsystems. + +To be able to load the system image into memory, the boot kernel needs to +include at least a subset of device drivers allowing it to access the storage +medium containing the image, although it doesn't need to include all of the +drivers present in the image kernel. After the image has been loaded, the +devices managed by the boot kernel need to be prepared for passing control back +to the image kernel. This is very similar to the initial steps involved in +creating a system image, and it is accomplished in the same way, using prepare, +freeze, and freeze_noirq phases. However the devices affected by these phases +are only those having drivers in the boot kernel; other devices will still be in +whatever state the boot loader left them. + +Should the restoration of the pre-hibernation memory contents fail, the boot +kernel would go through the "thawing" procedure described above, using the +thaw_noirq, thaw, and complete phases, and then continue running normally. This +happens only rarely. Most often the pre-hibernation memory contents are +restored successfully and control is passed to the image kernel, which then +becomes responsible for bringing the system back to the working state. + +To achieve this, the image kernel must restore the devices' pre-hibernation +functionality. The operation is much like waking up from the memory sleep +state, although it involves different phases: + + restore_noirq, restore, complete + + 1. The restore_noirq phase is analogous to the resume_noirq phase. + + 2. The restore phase is analogous to the resume phase. + + 3. The complete phase is discussed above. + +The main difference from resume[_noirq] is that restore[_noirq] must assume the +device has been accessed and reconfigured by the boot loader or the boot kernel. +Consequently the state of the device may be different from the state remembered +from the freeze and freeze_noirq phases. The device may even need to be reset +and completely re-initialized. In many cases this difference doesn't matter, so +the resume[_noirq] and restore[_norq] method pointers can be set to the same +routines. Nevertheless, different callback pointers are used in case there is a +situation where it actually matters. -If a driver (or bus, or class) fails it suspend method, the system won't -enter the desired low power state; it will resume all the devices it's -suspended so far. -Note that drivers may need to perform different actions based on the target -system lowpower/sleep state. At this writing, there are only platform -specific APIs through which drivers could determine those target states. +System Devices +-------------- +System devices (sysdevs) follow a slightly different API, which can be found in + + include/linux/sysdev.h + drivers/base/sys.c + +System devices will be suspended with interrupts disabled, and after all other +devices have been suspended. On resume, they will be resumed before any other +devices, and also with interrupts disabled. These things occur in special +"sysdev_driver" phases, which affect only system devices. + +Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when +the non-boot CPUs are all offline and IRQs are disabled on the remaining online +CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a +sleep state (or a system image is created). During resume (or after the image +has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs +are enabled on the only online CPU, the non-boot CPUs are enabled, and the +resume_noirq (or thaw_noirq or restore_noirq) phase begins. + +Code to actually enter and exit the system-wide low power state sometimes +involves hardware details that are only known to the boot firmware, and +may leave a CPU running software (from SRAM or flash memory) that monitors +the system and manages its wakeup sequence. Device Low Power (suspend) States --------------------------------- -Device low-power states aren't very standard. One device might only handle +Device low-power states aren't standard. One device might only handle "on" and "off, while another might support a dozen different versions of "on" (how many engines are active?), plus a state that gets back to "on" faster than from a full "off". @@ -265,7 +546,7 @@ PCI device may not perform DMA or issue IRQs, and any wakeup events it issues would be issued through the PME# bus signal. Plus, there are several PCI-standard device states, some of which are optional. -In contrast, integrated system-on-chip processors often use irqs as the +In contrast, integrated system-on-chip processors often use IRQs as the wakeup event sources (so drivers would call enable_irq_wake) and might be able to treat DMA completion as a wakeup event (sometimes DMA can stay active too, it'd only be the CPU and some peripherals that sleep). @@ -284,120 +565,17 @@ ways; the aforementioned LCD might be active in one product's "standby", but a different product using the same SOC might work differently. -Meaning of pm_message_t.event ------------------------------ -Parameters to suspend calls include the device affected and a message of -type pm_message_t, which has one field: the event. If driver does not -recognize the event code, suspend calls may abort the request and return -a negative errno. However, most drivers will be fine if they implement -PM_EVENT_SUSPEND semantics for all messages. +Power Management Notifiers +-------------------------- +There are some operations that cannot be carried out by the power management +callbacks discussed above, because the callbacks occur too late or too early. +To handle these cases, subsystems and device drivers may register power +management notifiers that are called before tasks are frozen and after they have +been thawed. Generally speaking, the PM notifiers are suitable for performing +actions that either require user space to be available, or at least won't +interfere with user space. -The event codes are used to refine the goal of suspending the device, and -mostly matter when creating or resuming system memory image snapshots, as -used with suspend-to-disk: - - PM_EVENT_SUSPEND -- quiesce the driver and put hardware into a low-power - state. When used with system sleep states like "suspend-to-RAM" or - "standby", the upcoming resume() call will often be able to rely on - state kept in hardware, or issue system wakeup events. - - PM_EVENT_HIBERNATE -- Put hardware into a low-power state and enable wakeup - events as appropriate. It is only used with hibernation - (suspend-to-disk) and few devices are able to wake up the system from - this state; most are completely powered off. - - PM_EVENT_FREEZE -- quiesce the driver, but don't necessarily change into - any low power mode. A system snapshot is about to be taken, often - followed by a call to the driver's resume() method. Neither wakeup - events nor DMA are allowed. - - PM_EVENT_PRETHAW -- quiesce the driver, knowing that the upcoming resume() - will restore a suspend-to-disk snapshot from a different kernel image. - Drivers that are smart enough to look at their hardware state during - resume() processing need that state to be correct ... a PRETHAW could - be used to invalidate that state (by resetting the device), like a - shutdown() invocation would before a kexec() or system halt. Other - drivers might handle this the same way as PM_EVENT_FREEZE. Neither - wakeup events nor DMA are allowed. - -To enter "standby" (ACPI S1) or "Suspend to RAM" (STR, ACPI S3) states, or -the similarly named APM states, only PM_EVENT_SUSPEND is used; the other event -codes are used for hibernation ("Suspend to Disk", STD, ACPI S4). - -There's also PM_EVENT_ON, a value which never appears as a suspend event -but is sometimes used to record the "not suspended" device state. - - -Resuming Devices ----------------- -Resuming is done in multiple phases, much like suspending, with all -devices processing each phase's calls before the next phase begins. - -The phases are seen by driver notifications issued in this order: - - 1 bus.resume(dev) reverses the effects of bus.suspend(). This may - be morphed into a device driver call with bus-specific parameters; - implementations may sleep. - - 2 class.resume(dev) is called for devices associated with a class - that has such a method. Implementations may sleep. - - This reverses the effects of class.suspend(), and would usually - reactivate the device's I/O queue. - -At the end of those phases, drivers should normally be as functional as -they were before suspending: I/O can be performed using DMA and IRQs, and -the relevant clocks are gated on. The device need not be "fully on"; it -might be in a runtime lowpower/suspend state that acts as if it were. - -However, the details here may again be platform-specific. For example, -some systems support multiple "run" states, and the mode in effect at -the end of resume() might not be the one which preceded suspension. -That means availability of certain clocks or power supplies changed, -which could easily affect how a driver works. - - -Drivers need to be able to handle hardware which has been reset since the -suspend methods were called, for example by complete reinitialization. -This may be the hardest part, and the one most protected by NDA'd documents -and chip errata. It's simplest if the hardware state hasn't changed since -the suspend() was called, but that can't always be guaranteed. - -Drivers must also be prepared to notice that the device has been removed -while the system was powered off, whenever that's physically possible. -PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses -where common Linux platforms will see such removal. Details of how drivers -will notice and handle such removals are currently bus-specific, and often -involve a separate thread. - - -Note that the bus-specific runtime PM wakeup mechanism can exist, and might -be defined to share some of the same driver code as for system wakeup. For -example, a bus-specific device driver's resume() method might be used there, -so it wouldn't only be called from bus.resume() during system-wide wakeup. -See bus-specific information about how runtime wakeup events are handled. - - -System Devices --------------- -System devices follow a slightly different API, which can be found in - - include/linux/sysdev.h - drivers/base/sys.c - -System devices will only be suspended with interrupts disabled, and after -all other devices have been suspended. On resume, they will be resumed -before any other devices, and also with interrupts disabled. - -That is, IRQs are disabled, the suspend_late() phase begins, then the -sysdev_driver.suspend() phase, and the system enters a sleep state. Then -the sysdev_driver.resume() phase begins, followed by the resume_early() -phase, after which IRQs are enabled. - -Code to actually enter and exit the system-wide low power state sometimes -involves hardware details that are only known to the boot firmware, and -may leave a CPU running software (from SRAM or flash memory) that monitors -the system and manages its wakeup sequence. +For details refer to Documentation/power/notifiers.txt. Runtime Power Management @@ -407,82 +585,23 @@ running. This feature is useful for devices that are not being used, and can offer significant power savings on a running system. These devices often support a range of runtime power states, which might use names such as "off", "sleep", "idle", "active", and so on. Those states will in some -cases (like PCI) be partially constrained by a bus the device uses, and will +cases (like PCI) be partially constrained by the bus the device uses, and will usually include hardware states that are also used in system sleep states. -However, note that if a driver puts a device into a runtime low power state -and the system then goes into a system-wide sleep state, it normally ought -to resume into that runtime low power state rather than "full on". Such -distinctions would be part of the driver-internal state machine for that -hardware; the whole point of runtime power management is to be sure that -drivers are decoupled in that way from the state machine governing phases -of the system-wide power/sleep state transitions. - - -Power Saving Techniques ------------------------ -Normally runtime power management is handled by the drivers without specific -userspace or kernel intervention, by device-aware use of techniques like: - - Using information provided by other system layers - - stay deeply "off" except between open() and close() - - if transceiver/PHY indicates "nobody connected", stay "off" - - application protocols may include power commands or hints - - Using fewer CPU cycles - - using DMA instead of PIO - - removing timers, or making them lower frequency - - shortening "hot" code paths - - eliminating cache misses - - (sometimes) offloading work to device firmware - - Reducing other resource costs - - gating off unused clocks in software (or hardware) - - switching off unused power supplies - - eliminating (or delaying/merging) IRQs - - tuning DMA to use word and/or burst modes - - Using device-specific low power states - - using lower voltages - - avoiding needless DMA transfers - -Read your hardware documentation carefully to see the opportunities that -may be available. If you can, measure the actual power usage and check -it against the budget established for your project. - - -Examples: USB hosts, system timer, system CPU ----------------------------------------------- -USB host controllers make interesting, if complex, examples. In many cases -these have no work to do: no USB devices are connected, or all of them are -in the USB "suspend" state. Linux host controller drivers can then disable -periodic DMA transfers that would otherwise be a constant power drain on the -memory subsystem, and enter a suspend state. In power-aware controllers, -entering that suspend state may disable the clock used with USB signaling, -saving a certain amount of power. - -The controller will be woken from that state (with an IRQ) by changes to the -signal state on the data lines of a given port, for example by an existing -peripheral requesting "remote wakeup" or by plugging a new peripheral. The -same wakeup mechanism usually works from "standby" sleep states, and on some -systems also from "suspend to RAM" (or even "suspend to disk") states. -(Except that ACPI may be involved instead of normal IRQs, on some hardware.) - -System devices like timers and CPUs may have special roles in the platform -power management scheme. For example, system timers using a "dynamic tick" -approach don't just save CPU cycles (by eliminating needless timer IRQs), -but they may also open the door to using lower power CPU "idle" states that -cost more than a jiffie to enter and exit. On x86 systems these are states -like "C3"; note that periodic DMA transfers from a USB host controller will -also prevent entry to a C3 state, much like a periodic timer IRQ. - -That kind of runtime mechanism interaction is common. "System On Chip" (SOC) -processors often have low power idle modes that can't be entered unless -certain medium-speed clocks (often 12 or 48 MHz) are gated off. When the -drivers gate those clocks effectively, then the system idle task may be able -to use the lower power idle modes and thereby increase battery life. - -If the CPU can have a "cpufreq" driver, there also may be opportunities -to shift to lower voltage settings and reduce the power cost of executing -a given number of instructions. (Without voltage adjustment, it's rare -for cpufreq to save much power; the cost-per-instruction must go down.) +A system-wide power transition can be started while some devices are in low +power states due to runtime power management. The system sleep PM callbacks +should recognize such situations and react to them appropriately, but the +necessary actions are subsystem-specific. + +In some cases the decision may be made at the subsystem level while in other +cases the device driver may be left to decide. In some cases it may be +desirable to leave a suspended device in that state during a system-wide power +transition, but in other cases the device must be put back into the full-power +state temporarily, for example so that its system wakeup capability can be +disabled. This all depends on the hardware and the design of the subsystem and +device driver in question. + +During system-wide resume from a sleep state it's best to put devices into the +full-power state, as explained in Documentation/power/runtime_pm.txt. Refer to +that document for more information regarding this particular issue as well as +for information on the device runtime power management framework in general. diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index c40866e8b957..bfed898a03fc 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -18,44 +18,46 @@ and pm_qos_params.h. This is done because having the available parameters being runtime configurable or changeable from a driver was seen as too easy to abuse. -For each parameter a list of performance requirements is maintained along with +For each parameter a list of performance requests is maintained along with an aggregated target value. The aggregated target value is updated with -changes to the requirement list or elements of the list. Typically the -aggregated target value is simply the max or min of the requirement values held +changes to the request list or elements of the list. Typically the +aggregated target value is simply the max or min of the request values held in the parameter list elements. From kernel mode the use of this interface is simple: -pm_qos_add_requirement(param_id, name, target_value): -Will insert a named element in the list for that identified PM_QOS parameter -with the target value. Upon change to this list the new target is recomputed -and any registered notifiers are called only if the target value is now -different. -pm_qos_update_requirement(param_id, name, new_target_value): -Will search the list identified by the param_id for the named list element and -then update its target value, calling the notification tree if the aggregated -target is changed. with that name is already registered. +handle = pm_qos_add_request(param_class, target_value): +Will insert an element into the list for that identified PM_QOS class with the +target value. Upon change to this list the new target is recomputed and any +registered notifiers are called only if the target value is now different. +Clients of pm_qos need to save the returned handle. -pm_qos_remove_requirement(param_id, name): -Will search the identified list for the named element and remove it, after -removal it will update the aggregate target and call the notification tree if -the target was changed as a result of removing the named requirement. +void pm_qos_update_request(handle, new_target_value): +Will update the list element pointed to by the handle with the new target value +and recompute the new aggregated target, calling the notification tree if the +target is changed. + +void pm_qos_remove_request(handle): +Will remove the element. After removal it will update the aggregate target and +call the notification tree if the target was changed as a result of removing +the request. From user mode: -Only processes can register a pm_qos requirement. To provide for automatic -cleanup for process the interface requires the process to register its -parameter requirements in the following way: +Only processes can register a pm_qos request. To provide for automatic +cleanup of a process, the interface requires the process to register its +parameter requests in the following way: To register the default pm_qos target for the specific parameter, the process must open one of /dev/[cpu_dma_latency, network_latency, network_throughput] As long as the device node is held open that process has a registered -requirement on the parameter. The name of the requirement is "process_<PID>" -derived from the current->pid from within the open system call. +request on the parameter. -To change the requested target value the process needs to write a s32 value to -the open device node. This translates to a pm_qos_update_requirement call. +To change the requested target value the process needs to write an s32 value to +the open device node. Alternatively the user mode program could write a hex +string for the value using 10 char long format e.g. "0x12345678". This +translates to a pm_qos_update_request call. To remove the user mode request for a target value simply close the device node. diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index cdebb5145c25..55c4175d8099 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -8,11 +8,11 @@ Please see overview.txt for a description of the terms used in this text. 1. Consumer Regulator Access (static & dynamic drivers) ======================================================= -A consumer driver can get access to it's supply regulator by calling :- +A consumer driver can get access to its supply regulator by calling :- regulator = regulator_get(dev, "Vcc"); -The consumer passes in it's struct device pointer and power supply ID. The core +The consumer passes in its struct device pointer and power supply ID. The core then finds the correct regulator by consulting a machine specific lookup table. If the lookup is successful then this call will return a pointer to the struct regulator that supplies this consumer. @@ -34,7 +34,7 @@ usually be called in your device drivers probe() and remove() respectively. 2. Regulator Output Enable & Disable (static & dynamic drivers) ==================================================================== -A consumer can enable it's power supply by calling:- +A consumer can enable its power supply by calling:- int regulator_enable(regulator); @@ -49,7 +49,7 @@ int regulator_is_enabled(regulator); This will return > zero when the regulator is enabled. -A consumer can disable it's supply when no longer needed by calling :- +A consumer can disable its supply when no longer needed by calling :- int regulator_disable(regulator); @@ -140,7 +140,7 @@ by calling :- int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); This will cause the core to recalculate the total load on the regulator (based -on all it's consumers) and change operating mode (if necessary and permitted) +on all its consumers) and change operating mode (if necessary and permitted) to best match the current operating load. The load_uA value can be determined from the consumers datasheet. e.g.most diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index 63728fed620b..bdec39b9bd75 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -52,7 +52,7 @@ static struct regulator_init_data regulator1_data = { }; Regulator-1 supplies power to Regulator-2. This relationship must be registered -with the core so that Regulator-1 is also enabled when Consumer A enables it's +with the core so that Regulator-1 is also enabled when Consumer A enables its supply (Regulator-2). The supply regulator is set by the supply_regulator_dev field below:- diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index ffd185bb6054..9363e056188a 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -35,16 +35,16 @@ Some terms used in this document:- o Consumer - Electronic device that is supplied power by a regulator. Consumers can be classified into two types:- - Static: consumer does not change it's supply voltage or + Static: consumer does not change its supply voltage or current limit. It only needs to enable or disable it's - power supply. It's supply voltage is set by the hardware, + power supply. Its supply voltage is set by the hardware, bootloader, firmware or kernel board initialisation code. Dynamic: consumer needs to change it's supply voltage or current limit to meet operation demands. - o Power Domain - Electronic circuit that is supplied it's input power by the + o Power Domain - Electronic circuit that is supplied its input power by the output power of a regulator, switch or by another power domain. diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index b967cd9137d6..81680f9f5909 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -24,6 +24,10 @@ assumed to be in the resume mode. The device cannot be open for simultaneous reading and writing. It is also impossible to have the device open more than once at a time. +Even opening the device has side effects. Data structures are +allocated, and PM_HIBERNATION_PREPARE / PM_RESTORE_PREPARE chains are +called. + The ioctl() commands recognized by the device are: SNAPSHOT_FREEZE - freeze user space processes (the current process is diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 79f533f38c61..46d22105aa07 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1289,7 +1289,7 @@ link between a device node and its interrupt parent in the interrupt tree. The value of interrupt-parent is the phandle of the parent node. -If the interrupt-parent property is not defined for a node, it's +If the interrupt-parent property is not defined for a node, its interrupt parent is assumed to be an ancestor in the node's _device tree_ hierarchy. diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt index ea68046bb9cb..299d0923537b 100644 --- a/Documentation/powerpc/dts-bindings/xilinx.txt +++ b/Documentation/powerpc/dts-bindings/xilinx.txt @@ -11,7 +11,7 @@ control how the core is synthesized. Historically, the EDK tool would extract the device parameters relevant to device drivers and copy them into an 'xparameters.h' in the form of #define symbols. This tells the - device drivers how the IP cores are configured, but it requres the kernel + device drivers how the IP cores are configured, but it requires the kernel to be recompiled every time the FPGA bitstream is resynthesized. The new approach is to export the parameters into the device tree and diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt index c4682b982a2e..ad340205d96a 100644 --- a/Documentation/powerpc/phyp-assisted-dump.txt +++ b/Documentation/powerpc/phyp-assisted-dump.txt @@ -19,7 +19,7 @@ dump offers several strong, practical advantages: immediately available to the system for normal use. -- After the dump is completed, no further reboots are required; the system will be fully usable, and running - in it's normal, production mode on it normal kernel. + in its normal, production mode on its normal kernel. The above can only be accomplished by coordination with, and assistance from the hypervisor. The procedure is diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index aae8355d3166..221f38be98f4 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -190,3 +190,61 @@ Example: for (node = rb_first(&mytree); node; node = rb_next(node)) printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring); +Support for Augmented rbtrees +----------------------------- + +Augmented rbtree is an rbtree with "some" additional data stored in each node. +This data can be used to augment some new functionality to rbtree. +Augmented rbtree is an optional feature built on top of basic rbtree +infrastructure. rbtree user who wants this feature will have an augment +callback function in rb_root initialized. + +This callback function will be called from rbtree core routines whenever +a node has a change in one or both of its children. It is the responsibility +of the callback function to recalculate the additional data that is in the +rb node using new children information. Note that if this new additional +data affects the parent node's additional data, then callback function has +to handle it and do the recursive updates. + + +Interval tree is an example of augmented rb tree. Reference - +"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein. +More details about interval trees: + +Classical rbtree has a single key and it cannot be directly used to store +interval ranges like [lo:hi] and do a quick lookup for any overlap with a new +lo:hi or to find whether there is an exact match for a new lo:hi. + +However, rbtree can be augmented to store such interval ranges in a structured +way making it possible to do efficient lookup and exact match. + +This "extra information" stored in each node is the maximum hi +(max_hi) value among all the nodes that are its descendents. This +information can be maintained at each node just be looking at the node +and its immediate children. And this will be used in O(log n) lookup +for lowest match (lowest start address among all possible matches) +with something like: + +find_lowest_match(lo, hi, node) +{ + lowest_match = NULL; + while (node) { + if (max_hi(node->left) > lo) { + // Lowest overlap if any must be on left side + node = node->left; + } else if (overlap(lo, hi, node)) { + lowest_match = node; + break; + } else if (lo > node->lo) { + // Lowest overlap if any must be on right side + node = node->right; + } else { + break; + } + } + return lowest_match; +} + +Finding exact match will be to first find lowest match and then to follow +successor nodes looking for exact match, until the start of a node is beyond +the hi value we are looking for. diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt index 4b736d24da7a..8df0b782c4d7 100644 --- a/Documentation/rt-mutex-design.txt +++ b/Documentation/rt-mutex-design.txt @@ -657,7 +657,7 @@ here. The waiter structure has a "task" field that points to the task that is blocked on the mutex. This field can be NULL the first time it goes through the loop -or if the task is a pending owner and had it's mutex stolen. If the "task" +or if the task is a pending owner and had its mutex stolen. If the "task" field is NULL then we need to set up the accounting for it. Task blocks on mutex diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index 6f33593e59e2..8239ebbcddce 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -211,7 +211,7 @@ provide fair CPU time to each such task group. For example, it may be desirable to first provide fair CPU time to each user on the system and then to each task belonging to a user. -CONFIG_GROUP_SCHED strives to achieve exactly that. It lets tasks to be +CONFIG_CGROUP_SCHED strives to achieve exactly that. It lets tasks to be grouped and divides CPU time fairly among such groups. CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and @@ -220,38 +220,11 @@ SCHED_RR) tasks. CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and SCHED_BATCH) tasks. -At present, there are two (mutually exclusive) mechanisms to group tasks for -CPU bandwidth control purposes: - - - Based on user id (CONFIG_USER_SCHED) - - With this option, tasks are grouped according to their user id. - - - Based on "cgroup" pseudo filesystem (CONFIG_CGROUP_SCHED) - - This options needs CONFIG_CGROUPS to be defined, and lets the administrator + These options need CONFIG_CGROUPS to be defined, and let the administrator create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See Documentation/cgroups/cgroups.txt for more information about this filesystem. -Only one of these options to group tasks can be chosen and not both. - -When CONFIG_USER_SCHED is defined, a directory is created in sysfs for each new -user and a "cpu_share" file is added in that directory. - - # cd /sys/kernel/uids - # cat 512/cpu_share # Display user 512's CPU share - 1024 - # echo 2048 > 512/cpu_share # Modify user 512's CPU share - # cat 512/cpu_share # Display user 512's CPU share - 2048 - # - -CPU bandwidth between two users is divided in the ratio of their CPU shares. -For example: if you would like user "root" to get twice the bandwidth of user -"guest," then set the cpu_share for both the users such that "root"'s cpu_share -is twice "guest"'s cpu_share. - -When CONFIG_CGROUP_SCHED is defined, a "cpu.shares" file is created for each +When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each group created using the pseudo filesystem. See example steps below to create task groups and modify their CPU share using the "cgroups" pseudo filesystem. @@ -273,24 +246,3 @@ task groups and modify their CPU share using the "cgroups" pseudo filesystem. # #Launch gmplayer (or your favourite movie player) # echo <movie_player_pid> > multimedia/tasks - -8. Implementation note: user namespaces - -User namespaces are intended to be hierarchical. But they are currently -only partially implemented. Each of those has ramifications for CFS. - -First, since user namespaces are hierarchical, the /sys/kernel/uids -presentation is inadequate. Eventually we will likely want to use sysfs -tagging to provide private views of /sys/kernel/uids within each user -namespace. - -Second, the hierarchical nature is intended to support completely -unprivileged use of user namespaces. So if using user groups, then -we want the users in a user namespace to be children of the user -who created it. - -That is currently unimplemented. So instead, every user in a new -user namespace will receive 1024 shares just like any user in the -initial user namespace. Note that at the moment creation of a new -user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and -CAP_SETGID. diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 86eabe6c3419..605b0d40329d 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -126,23 +126,12 @@ priority! 2.3 Basis for grouping tasks ---------------------------- -There are two compile-time settings for allocating CPU bandwidth. These are -configured using the "Basis for grouping tasks" multiple choice menu under -General setup > Group CPU Scheduler: - -a. CONFIG_USER_SCHED (aka "Basis for grouping tasks" = "user id") - -This lets you use the virtual files under -"/sys/kernel/uids/<uid>/cpu_rt_runtime_us" to control he CPU time reserved for -each user . - -The other option is: - -.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups") +Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real +CPU bandwidth to task groups. This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each -control group instead. +control group. For more information on working with control groups, you should read Documentation/cgroups/cgroups.txt as well. @@ -161,8 +150,7 @@ For now, this can be simplified to just the following (but see Future plans): =============== There is work in progress to make the scheduling period for each group -("/sys/kernel/uids/<uid>/cpu_rt_period_us" or -"/cgroup/<cgroup>/cpu.rt_period_us" respectively) configurable as well. +("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well. The constraint on the period is that a subgroup must have a smaller or equal period to its parent. But realistically its not very useful _yet_ diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index 2ffc1148eb95..e759e92e286d 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -707,7 +707,7 @@ Changes from 20040920 to 20041018 * Integrate patches from Christoph Hellwig: two new helpers common to lpfc_sli_resume_iocb and lpfc_sli_issue_iocb - singificant cleanup of those two functions - the unused SLI_IOCB_USE_TXQ is - gone - lpfc_sli_issue_iocb_wait loses it's flags argument + gone - lpfc_sli_issue_iocb_wait loses its flags argument totally. * Fix in lpfc_sli.c: we can not store a 5 bit value in a 4-bit field. @@ -1028,7 +1028,7 @@ Changes from 20040614 to 20040709 * Remove the need for buf_tmo. * Changed ULP_BDE64 to struct ulp_bde64. * Changed ULP_BDE to struct ulp_bde. - * Cleanup lpfc_os_return_scsi_cmd() and it's call path. + * Cleanup lpfc_os_return_scsi_cmd() and its call path. * Removed lpfc_no_device_delay. * Consolidating lpfc_hba_put_event() into lpfc_put_event(). * Removed following attributes and their functionality: diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt index d5acaa300a46..1540a92f6d2b 100644 --- a/Documentation/scsi/FlashPoint.txt +++ b/Documentation/scsi/FlashPoint.txt @@ -71,7 +71,7 @@ peters@mylex.com Ever since its introduction last October, the BusLogic FlashPoint LT has been problematic for members of the Linux community, in that no Linux -drivers have been available for this new Ultra SCSI product. Despite it's +drivers have been available for this new Ultra SCSI product. Despite its officially being positioned as a desktop workstation product, and not being particularly well suited for a high performance multitasking operating system like Linux, the FlashPoint LT has been touted by computer system diff --git a/Documentation/scsi/dtc3x80.txt b/Documentation/scsi/dtc3x80.txt index e8ae6230ab3e..1d7af9f9a8ed 100644 --- a/Documentation/scsi/dtc3x80.txt +++ b/Documentation/scsi/dtc3x80.txt @@ -12,7 +12,7 @@ The 3180 does not. Otherwise, they are identical. The DTC3x80 does not support DMA but it does have Pseudo-DMA which is supported by the driver. -It's DTC406 scsi chip is supposedly compatible with the NCR 53C400. +Its DTC406 scsi chip is supposedly compatible with the NCR 53C400. It is memory mapped, uses an IRQ, but no dma or io-port. There is internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double buffering is done automagically by the chip. Data is transferred diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 08e2b4d04aab..cda5f8fa2c66 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -1479,7 +1479,7 @@ Wide16 SCSI. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This enables the order of scanning diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt index f536907e241d..2b21890bc983 100644 --- a/Documentation/scsi/osst.txt +++ b/Documentation/scsi/osst.txt @@ -40,7 +40,7 @@ behavior looks very much the same as st to the userspace applications. History ------- -In the first place, osst shared it's identity very much with st. That meant +In the first place, osst shared its identity very much with st. That meant that it used the same kernel structures and the same device node as st. So you could only have either of them being present in the kernel. This has been fixed by registering an own device, now. diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index aec6549ab097..e00192de4d1c 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -70,7 +70,7 @@ Overview: up to an administrative entity controlling the vport. For example, if vports are to be associated with virtual machines, a XEN mgmt utility would be responsible for creating wwpn/wwnn's for the vport, - using it's own naming authority and OUI. (Note: it already does this + using its own naming authority and OUI. (Note: it already does this for virtual MAC addresses). @@ -81,7 +81,7 @@ Device Trees and Vport Objects: with rports and scsi target objects underneath it. Currently the FC transport creates the vport object and places it under the scsi_host object corresponding to the physical adapter. The LLDD will allocate - a new scsi_host for the vport and link it's object under the vport. + a new scsi_host for the vport and link its object under the vport. The remainder of the tree under the vports scsi_host is the same as the non-NPIV case. The transport is written currently to easily allow the parent of the vport to be something other than the scsi_host. diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index eb9a7b905b64..6f63b7989679 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -687,7 +687,7 @@ maintain the driver code. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This information is no longer used diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index bfcbbf88c44d..2075bbb8b3e2 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-asihpi + ----------------- + + Module for AudioScience ASI soundcards + + enable_hpi_hwdep - enable HPI hwdep for AudioScience soundcard + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-atiixp ----------------- @@ -622,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. - Module snd-es968 - ---------------- - - Module for sound cards based on ESS ES968 chip (PnP only). - - This module supports multiple cards, PnP and autoprobe. - - The power-management is supported. - Module snd-es1688 ----------------- Module for ESS AudioDrive ES-1688 and ES-688 sound cards. - port - port # for ES-1688 chip (0x220,0x240,0x260) - fm_port - port # for OPL3 (option; share the same port as default) + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) - irq - IRQ # for ES-1688 chip (5,7,9,10) mpu_irq - IRQ # for MPU-401 port (5,7,9,10) + fm_port - port # for OPL3 (option; share the same port as default) + + with isapnp=0, the following additional options are available: + port - port # for ES-1688 chip (0x220,0x240,0x260) + irq - IRQ # for ES-1688 chip (5,7,9,10) dma8 - DMA # for ES-1688 chip (0,1,3) - This module supports multiple cards and autoprobe (without MPU-401 port). + This module supports multiple cards and autoprobe (without MPU-401 port) + and PnP with the ES968 chip. Module snd-es18xx ----------------- diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 98d14cb8a85d..bdafdbd32561 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -204,7 +204,6 @@ generic parser regardless of the codec. Usually the codec-specific parser is much better than the generic parser (as now). Thus this option is more about the debugging purpose. - Speaker and Headphone Output ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ One of the most frequent (and obvious) bugs with HD-audio is the @@ -600,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec information before modified by the driver. Of course, the driver isn't usable with `probe_only=1`. But you can continue the configuration via hwdep sysfs file if hda-reconfig option is enabled. +Using `probe_only` mask 2 skips the reset of HDA codecs (use +`probe_only=3` as module option). The hwdep interface can be used +to determine the BIOS codec initialization. hda-verb diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index 9ac842be9b4f..05bf5a0eee41 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -188,8 +188,8 @@ The WM8731 output mixer has 3 inputs (sources) 3. Mic Sidetone Input Each input in this example has a kcontrol associated with it (defined in example -above) and is connected to the output mixer via it's kcontrol name. We can now -connect the destination widget (wrt audio signal) with it's source widgets. +above) and is connected to the output mixer via its kcontrol name. We can now +connect the destination widget (wrt audio signal) with its source widgets. /* output mixer */ {"Output Mixer", "Line Bypass Switch", "Line Input"}, diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index bab7711ce963..2524c75557df 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -67,7 +67,7 @@ static struct snd_soc_dai_link corgi_dai = { .ops = &corgi_ops, }; -struct snd_soc_card then sets up the machine with it's DAIs. e.g. +struct snd_soc_card then sets up the machine with its DAIs. e.g. /* corgi audio machine driver */ static struct snd_soc_card snd_soc_corgi = { diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt index 1e4c6d3655f2..138ac88c1461 100644 --- a/Documentation/sound/alsa/soc/overview.txt +++ b/Documentation/sound/alsa/soc/overview.txt @@ -33,7 +33,7 @@ features :- and machines. * Easy I2S/PCM audio interface setup between codec and SoC. Each SoC - interface and codec registers it's audio interface capabilities with the + interface and codec registers its audio interface capabilities with the core and are subsequently matched and configured when the application hardware parameters are known. diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 34c76a55bc04..9b659c79a547 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -54,12 +54,12 @@ Getting sparse ~~~~~~~~~~~~~~ You can get latest released versions from the Sparse homepage at -http://www.kernel.org/pub/linux/kernel/people/josh/sparse/ +https://sparse.wiki.kernel.org/index.php/Main_Page Alternatively, you can get snapshots of the latest development version of sparse using git to clone.. - git://git.kernel.org/pub/scm/linux/kernel/git/josh/sparse.git + git://git.kernel.org/pub/scm/devel/sparse/sparse.git DaveJ has hourly generated tarballs of the git tree available at.. diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 5d8bc2cd250c..c1a1fd636bf9 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -125,7 +125,7 @@ versions of the sysfs interface. - Block The converted block subsystem at /sys/class/block or /sys/subsystem/block will contain the links for disks and partitions - at the same level, never in a hierarchy. Assuming the block subsytem to + at the same level, never in a hierarchy. Assuming the block subsystem to contain only disks and not partition devices in the same flat list is a bug in the application. diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index d56a01775423..5c17196c8fe9 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -177,13 +177,13 @@ virtual console (ALT+Fn) and then back again should also help. * I hit SysRq, but nothing seems to happen, what's wrong? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -There are some keyboards that send different scancodes for SysRq than the -pre-defined 0x54. So if SysRq doesn't work out of the box for a certain -keyboard, run 'showkey -s' to find out the proper scancode sequence. Then -use 'setkeycodes <sequence> 84' to define this sequence to the usual SysRq -code (84 is decimal for 0x54). It's probably best to put this command in a -boot script. Oh, and by the way, you exit 'showkey' by not typing anything -for ten seconds. +There are some keyboards that produce a different keycode for SysRq than the +pre-defined value of 99 (see KEY_SYSRQ in include/linux/input.h), or which +don't have a SysRq key at all. In these cases, run 'showkey -s' to find an +appropriate scancode sequence, and use 'setkeycodes <sequence> 99' to map +this sequence to the usual SysRq code (e.g., 'setkeycodes e05b 99'). It's +probably best to put this command in a boot script. Oh, and by the way, you +exit 'showkey' by not typing anything for ten seconds. * I want to add SysRQ key events to a module, how does it work? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 02ac6ed38b2d..09bd8e902989 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -90,7 +90,8 @@ In order to facilitate early boot debugging, use boot option: trace_event=[event-list] -The format of this boot option is the same as described in section 2.1. +event-list is a comma separated list of events. See section 2.1 for event +format. 3. Defining an event-enabled tracepoint ======================================= @@ -238,7 +239,7 @@ subsystem's filter file. For convenience, filters for every event in a subsystem can be set or cleared as a group by writing a filter expression into the filter file -at the root of the subsytem. Note however, that if a filter for any +at the root of the subsystem. Note however, that if a filter for any event within the subsystem lacks a field specified in the subsystem filter, or if the filter can't be applied for any other reason, the filter for that event will retain its previous setting. This can @@ -250,7 +251,7 @@ fields can be guaranteed to propagate successfully to all events. Here are a few subsystem filter examples that also illustrate the above points: -Clear the filters on all events in the sched subsytem: +Clear the filters on all events in the sched subsystem: # cd /sys/kernel/debug/tracing/events/sched # echo 0 > filter @@ -260,7 +261,7 @@ none none Set a filter using only common fields for all events in the sched -subsytem (all events end up with the same filter): +subsystem (all events end up with the same filter): # cd /sys/kernel/debug/tracing/events/sched # echo common_pid == 0 > filter @@ -270,7 +271,7 @@ common_pid == 0 common_pid == 0 Attempt to set a filter using a non-common field for all events in the -sched subsytem (all events but those that have a prev_pid field retain +sched subsystem (all events but those that have a prev_pid field retain their old filters): # cd /sys/kernel/debug/tracing/events/sched diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 03485bfbd797..557c1edeccaf 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -155,6 +155,9 @@ of ftrace. Here is a list of some of the key files: to be traced. Echoing names of functions into this file will limit the trace to only those functions. + This interface also allows for commands to be used. See the + "Filter commands" section for more details. + set_ftrace_notrace: This has an effect opposite to that of @@ -1337,12 +1340,14 @@ ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one can either use the sysctl function or set it via the proc system interface. - sysctl kernel.ftrace_dump_on_oops=1 + sysctl kernel.ftrace_dump_on_oops=n or - echo 1 > /proc/sys/kernel/ftrace_dump_on_oops + echo n > /proc/sys/kernel/ftrace_dump_on_oops +If n = 1, ftrace will dump buffers of all CPUs, if n = 2 ftrace will +only dump the buffer of the CPU that triggered the oops. Here's an example of such a dump after a null pointer dereference in a kernel module: @@ -1822,6 +1827,47 @@ this special filter via: echo > set_graph_function +Filter commands +--------------- + +A few commands are supported by the set_ftrace_filter interface. +Trace commands have the following format: + +<function>:<command>:<parameter> + +The following commands are supported: + +- mod + This command enables function filtering per module. The + parameter defines the module. For example, if only the write* + functions in the ext3 module are desired, run: + + echo 'write*:mod:ext3' > set_ftrace_filter + + This command interacts with the filter in the same way as + filtering based on function names. Thus, adding more functions + in a different module is accomplished by appending (>>) to the + filter file. Remove specific module functions by prepending + '!': + + echo '!writeback*:mod:ext3' >> set_ftrace_filter + +- traceon/traceoff + These commands turn tracing on and off when the specified + functions are hit. The parameter determines how many times the + tracing system is turned on and off. If unspecified, there is + no limit. For example, to disable tracing when a schedule bug + is hit the first 5 times, run: + + echo '__schedule_bug:traceoff:5' > set_ftrace_filter + + These commands are cumulative whether or not they are appended + to set_ftrace_filter. To remove a command, prepend it by '!' + and drop the parameter: + + echo '!__schedule_bug:traceoff' > set_ftrace_filter + + trace_pipe ---------- diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt index a9100b28eb84..ec94748ae65b 100644 --- a/Documentation/trace/kprobetrace.txt +++ b/Documentation/trace/kprobetrace.txt @@ -40,7 +40,9 @@ Synopsis of kprobe_events $stack : Fetch stack address. $retval : Fetch return value.(*) +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**) - NAME=FETCHARG: Set NAME as the argument name of FETCHARG. + NAME=FETCHARG : Set NAME as the argument name of FETCHARG. + FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types + (u8/u16/u32/u64/s8/s16/s32/s64) are supported. (*) only for return probe. (**) this is useful for fetching a field of data structures. diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt index c480e9c32dbd..4c5e37939344 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -381,7 +381,7 @@ descriptor that gives us the status of the transfer, its identification we issue another URB to read into the destination buffer the chunk of data coming out of the remote endpoint. Done, wait for the next guy. The callbacks for the URBs issued from here are the ones that will declare -the xfer complete at some point and call it's callback. +the xfer complete at some point and call its callback. Seems simple, but the implementation is not trivial. diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index f11c583295e9..4739d5684305 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -100,7 +100,7 @@ 99 -> AD-TVK503 100 -> Hercules Smart TV Stereo 101 -> Pace TV & Radio Card -102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155] +102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155,0800:a155,0801:a155,0802:a155,0803:a155] 103 -> Grand X-Guard / Trust 814PCI [0304:0102] 104 -> Nebula Electronics DigiTV [0071:0101] 105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433] diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 7ec3c4e4b60f..f2510541373b 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -82,3 +82,4 @@ 81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654] 82 -> WinFast DTV2000 H rev. J [107d:6f2b] 83 -> Prof 7301 DVB-S/S2 [b034:3034] + 84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 0c166ff003a0..3a623aaeae5f 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -27,6 +27,7 @@ 26 -> Hercules Smart TV USB 2.0 (em2820/em2840) 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840) 28 -> Leadtek Winfast USB II Deluxe (em2820/em2840) + 29 -> EM2860/TVP5150 Reference Design (em2860) 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) 31 -> Usbgear VD204v9 (em2821) 32 -> Supercomp USB 2.0 TV (em2821) @@ -70,3 +71,4 @@ 72 -> Gadmei UTV330+ (em2861) 73 -> Reddo DVB-C USB TV Box (em2870) 74 -> Actionmaster/LinXcel/Digitus VC211A (em2800) + 75 -> Dikom DK300 (em2882) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index b4a767060ed7..070f2576707e 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -175,3 +175,6 @@ 174 -> Asus Europa Hybrid OEM [1043:4847] 175 -> Leadtek Winfast DTV1000S [107d:6655] 176 -> Beholder BeholdTV 505 RDS [0000:5051] +177 -> Hawell HW-404M7 +179 -> Beholder BeholdTV H7 [5ace:7190] +180 -> Beholder BeholdTV A7 [5ace:7090] diff --git a/Documentation/video4linux/extract_xc3028.pl b/Documentation/video4linux/extract_xc3028.pl index 2cb816047fc1..47877deae6d7 100644 --- a/Documentation/video4linux/extract_xc3028.pl +++ b/Documentation/video4linux/extract_xc3028.pl @@ -5,12 +5,18 @@ # # In order to use, you need to: # 1) Download the windows driver with something like: +# Version 2.4 +# wget http://www.twinhan.com/files/AW/BDA T/20080303_V1.0.6.7.zip +# or wget http://www.stefanringel.de/pub/20080303_V1.0.6.7.zip +# Version 2.7 # wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip -# 2) Extract the file hcw85bda.sys from the zip into the current dir: +# 2) Extract the files from the zip into the current dir: +# unzip -j 20080303_V1.0.6.7.zip 20080303_v1.0.6.7/UDXTTM6000.sys # unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys # 3) run the script: # ./extract_xc3028.pl -# 4) copy the generated file: +# 4) copy the generated files: +# cp xc3028-v24.fw /lib/firmware # cp xc3028-v27.fw /lib/firmware #use strict; @@ -135,7 +141,7 @@ sub write_hunk_fix_endian($$) } } -sub main_firmware($$$$) +sub main_firmware_24($$$$) { my $out; my $j=0; @@ -146,8 +152,774 @@ sub main_firmware($$$$) for ($j = length($name); $j <32; $j++) { $name = $name.chr(0); + } + + open OUTFILE, ">$outfile"; + syswrite(OUTFILE, $name); + write_le16($version); + write_le16($nr_desc); + + # + # Firmware 0, type: BASE FW F8MHZ (0x00000003), id: (0000000000000000), size: 6635 + # + + write_le32(0x00000003); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6635); # Size + write_hunk_fix_endian(257752, 6635); + + # + # Firmware 1, type: BASE FW F8MHZ MTS (0x00000007), id: (0000000000000000), size: 6635 + # + + write_le32(0x00000007); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6635); # Size + write_hunk_fix_endian(264392, 6635); + + # + # Firmware 2, type: BASE FW FM (0x00000401), id: (0000000000000000), size: 6525 + # + + write_le32(0x00000401); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6525); # Size + write_hunk_fix_endian(271040, 6525); + + # + # Firmware 3, type: BASE FW FM INPUT1 (0x00000c01), id: (0000000000000000), size: 6539 + # + + write_le32(0x00000c01); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6539); # Size + write_hunk_fix_endian(277568, 6539); + + # + # Firmware 4, type: BASE FW (0x00000001), id: (0000000000000000), size: 6633 + # + + write_le32(0x00000001); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6633); # Size + write_hunk_fix_endian(284120, 6633); + + # + # Firmware 5, type: BASE FW MTS (0x00000005), id: (0000000000000000), size: 6617 + # + + write_le32(0x00000005); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(6617); # Size + write_hunk_fix_endian(290760, 6617); + + # + # Firmware 6, type: STD FW (0x00000000), id: PAL/BG A2/A (0000000100000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000001, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(297384, 161); + + # + # Firmware 7, type: STD FW MTS (0x00000004), id: PAL/BG A2/A (0000000100000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000001, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(297552, 169); + + # + # Firmware 8, type: STD FW (0x00000000), id: PAL/BG A2/B (0000000200000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000002, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(297728, 161); + + # + # Firmware 9, type: STD FW MTS (0x00000004), id: PAL/BG A2/B (0000000200000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000002, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(297896, 169); + + # + # Firmware 10, type: STD FW (0x00000000), id: PAL/BG NICAM/A (0000000400000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000004, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(298072, 161); + + # + # Firmware 11, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/A (0000000400000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000004, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(298240, 169); + + # + # Firmware 12, type: STD FW (0x00000000), id: PAL/BG NICAM/B (0000000800000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(298416, 161); + + # + # Firmware 13, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/B (0000000800000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(298584, 169); + + # + # Firmware 14, type: STD FW (0x00000000), id: PAL/DK A2 (00000003000000e0), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le32(161); # Size + write_hunk_fix_endian(298760, 161); + + # + # Firmware 15, type: STD FW MTS (0x00000004), id: PAL/DK A2 (00000003000000e0), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le32(169); # Size + write_hunk_fix_endian(298928, 169); + + # + # Firmware 16, type: STD FW (0x00000000), id: PAL/DK NICAM (0000000c000000e0), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x0000000c, 0x000000e0); # ID + write_le32(161); # Size + write_hunk_fix_endian(299104, 161); + + # + # Firmware 17, type: STD FW MTS (0x00000004), id: PAL/DK NICAM (0000000c000000e0), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x0000000c, 0x000000e0); # ID + write_le32(169); # Size + write_hunk_fix_endian(299272, 169); + + # + # Firmware 18, type: STD FW (0x00000000), id: SECAM/K1 (0000000000200000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le32(161); # Size + write_hunk_fix_endian(299448, 161); + + # + # Firmware 19, type: STD FW MTS (0x00000004), id: SECAM/K1 (0000000000200000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le32(169); # Size + write_hunk_fix_endian(299616, 169); + + # + # Firmware 20, type: STD FW (0x00000000), id: SECAM/K3 (0000000004000000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x04000000); # ID + write_le32(161); # Size + write_hunk_fix_endian(299792, 161); + + # + # Firmware 21, type: STD FW MTS (0x00000004), id: SECAM/K3 (0000000004000000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x04000000); # ID + write_le32(169); # Size + write_hunk_fix_endian(299960, 169); + + # + # Firmware 22, type: STD FW D2633 DTV6 ATSC (0x00010030), id: (0000000000000000), size: 149 + # + + write_le32(0x00010030); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300136, 149); + + # + # Firmware 23, type: STD FW D2620 DTV6 QAM (0x00000068), id: (0000000000000000), size: 149 + # + + write_le32(0x00000068); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300296, 149); + + # + # Firmware 24, type: STD FW D2633 DTV6 QAM (0x00000070), id: (0000000000000000), size: 149 + # + + write_le32(0x00000070); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300448, 149); + + # + # Firmware 25, type: STD FW D2620 DTV7 (0x00000088), id: (0000000000000000), size: 149 + # + + write_le32(0x00000088); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300608, 149); + + # + # Firmware 26, type: STD FW D2633 DTV7 (0x00000090), id: (0000000000000000), size: 149 + # + + write_le32(0x00000090); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300760, 149); + + # + # Firmware 27, type: STD FW D2620 DTV78 (0x00000108), id: (0000000000000000), size: 149 + # + + write_le32(0x00000108); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(300920, 149); + + # + # Firmware 28, type: STD FW D2633 DTV78 (0x00000110), id: (0000000000000000), size: 149 + # + + write_le32(0x00000110); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(301072, 149); + + # + # Firmware 29, type: STD FW D2620 DTV8 (0x00000208), id: (0000000000000000), size: 149 + # + + write_le32(0x00000208); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(301232, 149); + + # + # Firmware 30, type: STD FW D2633 DTV8 (0x00000210), id: (0000000000000000), size: 149 + # + + write_le32(0x00000210); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(301384, 149); + + # + # Firmware 31, type: STD FW FM (0x00000400), id: (0000000000000000), size: 135 + # + + write_le32(0x00000400); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(135); # Size + write_hunk_fix_endian(301554, 135); + + # + # Firmware 32, type: STD FW (0x00000000), id: PAL/I (0000000000000010), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le32(161); # Size + write_hunk_fix_endian(301688, 161); + + # + # Firmware 33, type: STD FW MTS (0x00000004), id: PAL/I (0000000000000010), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le32(169); # Size + write_hunk_fix_endian(301856, 169); + + # + # Firmware 34, type: STD FW (0x00000000), id: SECAM/L AM (0000001000400000), size: 169 + # + + # + # Firmware 35, type: STD FW (0x00000000), id: SECAM/L NICAM (0000000c00400000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x0000000c, 0x00400000); # ID + write_le32(161); # Size + write_hunk_fix_endian(302032, 161); + + # + # Firmware 36, type: STD FW (0x00000000), id: SECAM/Lc (0000000000800000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00800000); # ID + write_le32(161); # Size + write_hunk_fix_endian(302200, 161); + + # + # Firmware 37, type: STD FW (0x00000000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(302368, 161); + + # + # Firmware 38, type: STD FW LCD (0x00001000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00001000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(302536, 161); + + # + # Firmware 39, type: STD FW LCD NOGD (0x00003000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00003000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(302704, 161); + + # + # Firmware 40, type: STD FW MTS (0x00000004), id: NTSC/M Kr (0000000000008000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(169); # Size + write_hunk_fix_endian(302872, 169); + + # + # Firmware 41, type: STD FW (0x00000000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(303048, 161); + + # + # Firmware 42, type: STD FW LCD (0x00001000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00001000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(303216, 161); + + # + # Firmware 43, type: STD FW LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00003000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(303384, 161); + + # + # Firmware 44, type: STD FW (0x00000000), id: NTSC/M Jp (0000000000002000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00002000); # ID + write_le32(161); # Size + write_hunk_fix_endian(303552, 161); + + # + # Firmware 45, type: STD FW MTS (0x00000004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(303720, 169); + + # + # Firmware 46, type: STD FW MTS LCD (0x00001004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00001004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(303896, 169); + + # + # Firmware 47, type: STD FW MTS LCD NOGD (0x00003004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00003004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(304072, 169); + + # + # Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3280); # IF + write_le32(192); # Size + write_hunk(309048, 192); + + # + # Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192 + # + +# write_le32(0x60000000); # Type +# write_le64(0x00000000, 0x00000000); # ID +# write_le16(3300); # IF +# write_le32(192); # Size +# write_hunk(304440, 192); + + # + # Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3440); # IF + write_le32(192); # Size + write_hunk(309432, 192); + + # + # Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3460); # IF + write_le32(192); # Size + write_hunk(309624, 192); + + # + # Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60210020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3800); # IF + write_le32(192); # Size + write_hunk(306936, 192); + + # + # Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4000); # IF + write_le32(192); # Size + write_hunk(309240, 192); + + # + # Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60410020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4080); # IF + write_le32(192); # Size + write_hunk(307128, 192); + + # + # Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4200); # IF + write_le32(192); # Size + write_hunk(308856, 192); + + # + # Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (0000000000008000), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le16(4320); # IF + write_le32(192); # Size + write_hunk(305208, 192); + + # + # Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4450); # IF + write_le32(192); # Size + write_hunk(309816, 192); + + # + # Firmware 58, type: SCODE FW MTS LCD NOGD MONO IF HAS IF (0x6002b004), IF = 4.50 MHz id: NTSC PAL/M PAL/N (000000000000b700), size: 192 + # + + write_le32(0x6002b004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le16(4500); # IF + write_le32(192); # Size + write_hunk(304824, 192); + + # + # Firmware 59, type: SCODE FW LCD NOGD IF HAS IF (0x60023000), IF = 4.60 MHz id: NTSC/M Kr (0000000000008000), size: 192 + # + + write_le32(0x60023000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le16(4600); # IF + write_le32(192); # Size + write_hunk(305016, 192); + + # + # Firmware 60, type: SCODE FW DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 HAS IF (0x620003e0), IF = 4.76 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x620003e0); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4760); # IF + write_le32(192); # Size + write_hunk(304440, 192); + + # + # Firmware 61, type: SCODE FW HAS IF (0x60000000), IF = 4.94 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4940); # IF + write_le32(192); # Size + write_hunk(308664, 192); + + # + # Firmware 62, type: SCODE FW HAS IF (0x60000000), IF = 5.26 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5260); # IF + write_le32(192); # Size + write_hunk(307704, 192); + + # + # Firmware 63, type: SCODE FW MONO HAS IF (0x60008000), IF = 5.32 MHz id: PAL/BG A2 NICAM (0000000f00000007), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x0000000f, 0x00000007); # ID + write_le16(5320); # IF + write_le32(192); # Size + write_hunk(307896, 192); + + # + # Firmware 64, type: SCODE FW DTV7 DTV78 DTV8 DIBCOM52 CHINA HAS IF (0x65000380), IF = 5.40 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x65000380); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5400); # IF + write_le32(192); # Size + write_hunk(304248, 192); + + # + # Firmware 65, type: SCODE FW DTV6 ATSC OREN538 HAS IF (0x60110020), IF = 5.58 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60110020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5580); # IF + write_le32(192); # Size + write_hunk(306744, 192); + + # + # Firmware 66, type: SCODE FW HAS IF (0x60000000), IF = 5.64 MHz id: PAL/BG A2 (0000000300000007), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000003, 0x00000007); # ID + write_le16(5640); # IF + write_le32(192); # Size + write_hunk(305592, 192); + + # + # Firmware 67, type: SCODE FW HAS IF (0x60000000), IF = 5.74 MHz id: PAL/BG NICAM (0000000c00000007), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x0000000c, 0x00000007); # ID + write_le16(5740); # IF + write_le32(192); # Size + write_hunk(305784, 192); + + # + # Firmware 68, type: SCODE FW HAS IF (0x60000000), IF = 5.90 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5900); # IF + write_le32(192); # Size + write_hunk(307512, 192); + + # + # Firmware 69, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.00 MHz id: PAL/DK PAL/I SECAM/K3 SECAM/L SECAM/Lc NICAM (0000000c04c000f0), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x0000000c, 0x04c000f0); # ID + write_le16(6000); # IF + write_le32(192); # Size + write_hunk(305576, 192); + + # + # Firmware 70, type: SCODE FW DTV6 QAM ATSC LG60 F6MHZ HAS IF (0x68050060), IF = 6.20 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x68050060); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(6200); # IF + write_le32(192); # Size + write_hunk(306552, 192); + + # + # Firmware 71, type: SCODE FW HAS IF (0x60000000), IF = 6.24 MHz id: PAL/I (0000000000000010), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le16(6240); # IF + write_le32(192); # Size + write_hunk(305400, 192); + + # + # Firmware 72, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.32 MHz id: SECAM/K1 (0000000000200000), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le16(6320); # IF + write_le32(192); # Size + write_hunk(308472, 192); + + # + # Firmware 73, type: SCODE FW HAS IF (0x60000000), IF = 6.34 MHz id: SECAM/K1 (0000000000200000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le16(6340); # IF + write_le32(192); # Size + write_hunk(306360, 192); + + # + # Firmware 74, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.50 MHz id: PAL/DK SECAM/K3 SECAM/L NICAM (0000000c044000e0), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x0000000c, 0x044000e0); # ID + write_le16(6500); # IF + write_le32(192); # Size + write_hunk(308280, 192); + + # + # Firmware 75, type: SCODE FW DTV6 ATSC ATI638 HAS IF (0x60090020), IF = 6.58 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60090020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(6580); # IF + write_le32(192); # Size + write_hunk(304632, 192); + + # + # Firmware 76, type: SCODE FW HAS IF (0x60000000), IF = 6.60 MHz id: PAL/DK A2 (00000003000000e0), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le16(6600); # IF + write_le32(192); # Size + write_hunk(306168, 192); + + # + # Firmware 77, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.68 MHz id: PAL/DK A2 (00000003000000e0), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le16(6680); # IF + write_le32(192); # Size + write_hunk(308088, 192); + + # + # Firmware 78, type: SCODE FW DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF = 8.14 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60810020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(8140); # IF + write_le32(192); # Size + write_hunk(307320, 192); + + # + # Firmware 79, type: SCODE FW HAS IF (0x60000000), IF = 8.20 MHz id: (0000000000000000), size: 192 + # + +# write_le32(0x60000000); # Type +# write_le64(0x00000000, 0x00000000); # ID +# write_le16(8200); # IF +# write_le32(192); # Size +# write_hunk(308088, 192); } +sub main_firmware_27($$$$) +{ + my $out; + my $j=0; + my $outfile = shift; + my $name = shift; + my $version = shift; + my $nr_desc = shift; + + for ($j = length($name); $j <32; $j++) { + $name = $name.chr(0); + } + open OUTFILE, ">$outfile"; syswrite(OUTFILE, $name); write_le16($version); @@ -906,20 +1678,39 @@ sub main_firmware($$$$) write_hunk(812856, 192); } + sub extract_firmware { - my $sourcefile = "hcw85bda.sys"; - my $hash = "0e44dbf63bb0169d57446aec21881ff2"; - my $outfile = "xc3028-v27.fw"; - my $name = "xc2028 firmware"; - my $version = 519; - my $nr_desc = 80; + my $sourcefile_24 = "UDXTTM6000.sys"; + my $hash_24 = "cb9deb5508a5e150af2880f5b0066d78"; + my $outfile_24 = "xc3028-v24.fw"; + my $name_24 = "xc2028 firmware"; + my $version_24 = 516; + my $nr_desc_24 = 77; + my $out; + + my $sourcefile_27 = "hcw85bda.sys"; + my $hash_27 = "0e44dbf63bb0169d57446aec21881ff2"; + my $outfile_27 = "xc3028-v27.fw"; + my $name_27 = "xc2028 firmware"; + my $version_27 = 519; + my $nr_desc_27 = 80; my $out; - verify($sourcefile, $hash); + if (-e $sourcefile_24) { + verify($sourcefile_24, $hash_24); + + open INFILE, "<$sourcefile_24"; + main_firmware_24($outfile_24, $name_24, $version_24, $nr_desc_24); + close INFILE; + } - open INFILE, "<$sourcefile"; - main_firmware($outfile, $name, $version, $nr_desc); - close INFILE; + if (-e $sourcefile_27) { + verify($sourcefile_27, $hash_27); + + open INFILE, "<$sourcefile_27"; + main_firmware_27($outfile_27, $name_27, $version_27, $nr_desc_27); + close INFILE; + } } extract_firmware; diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 181b9e6fd984..8f3f5d33327c 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -50,6 +50,8 @@ zc3xx 0458:700f Genius VideoCam Web V2 sonixj 0458:7025 Genius Eye 311Q sn9c20x 0458:7029 Genius Look 320s sonixj 0458:702e Genius Slim 310 NB +sn9c20x 0458:704a Genius Slim 1320 +sn9c20x 0458:704c Genius i-Look 1321 sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650) sonixj 045e:00f5 MicroSoft VX3000 sonixj 045e:00f7 MicroSoft VX1000 @@ -305,12 +307,14 @@ sonixj 0c45:6138 Sn9c120 Mo4000 sonixj 0c45:613a Microdia Sonix PC Camera sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:6142 Hama PC-Webcam AC-150 sonixj 0c45:6143 Sonix Pccam168 sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia sonixj 0c45:614a Frontech E-Ccam (JIL-2225) sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) +sn9c20x 0c45:624c PC Camera (SN9C201 + MT9M112) sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968) sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650) sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650) @@ -323,6 +327,7 @@ sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650) sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001) sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111) sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:628c PC Camera (SN9C201 + MT9M112) sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968) sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650) sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670) diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt index 2ae16349a78d..cb47e723af74 100644 --- a/Documentation/video4linux/sh_mobile_ceu_camera.txt +++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt @@ -17,18 +17,18 @@ Generic scaling / cropping scheme -2-- -\ | --\ | --\ -+-5-- -\ -- -3-- -| ---\ -| --- -4-- -\ -| -\ -| - -6-- ++-5-- . -- -3-- -\ +| `... -\ +| `... -4-- . - -7.. +| `. +| `. .6-- | -| - -6'- -| -/ -| --- -4'- -/ -| ---/ -+-5'- -/ -| -- -3'- +| . .6'- +| .´ +| ... -4'- .´ +| ...´ - -7'. ++-5'- .´ -/ +| -- -3'- -/ | --/ | --/ -2'- -/ @@ -36,7 +36,11 @@ Generic scaling / cropping scheme | -1'- -Produced by user requests: +In the above chart minuses and slashes represent "real" data amounts, points and +accents represent "useful" data, basically, CEU scaled amd cropped output, +mapped back onto the client's source plane. + +Such a configuration can be produced by user requests: S_CROP(left / top = (5) - (1), width / height = (5') - (5)) S_FMT(width / height = (6') - (6)) @@ -106,52 +110,30 @@ window: S_CROP ------ -If old scale applied to new crop is invalid produce nearest new scale possible - -1. Calculate current combined scales. - - scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3))) - -2. Apply iterative sensor S_CROP for new input window. - -3. If old combined scales applied to new crop produce an impossible user window, -adjust scales to produce nearest possible window. - - width_u_out = ((5') - (5)) / scale_comb +The API at http://v4l2spec.bytesex.org/spec/x1904.htm says: - if (width_u_out > max) - scale_comb = ((5') - (5)) / max; - else if (width_u_out < min) - scale_comb = ((5') - (5)) / min; +"...specification does not define an origin or units. However by convention +drivers should horizontally count unscaled samples relative to 0H." -4. Issue G_CROP to retrieve actual input window. +We choose to follow the advise and interpret cropping units as client input +pixels. -5. Using actual input window and calculated combined scales calculate sensor -target output window. - - width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb - -6. Apply iterative S_FMT for new sensor target output window. - -7. Issue G_FMT to retrieve the actual sensor output window. - -8. Calculate sensor scales. - - scale_s = ((3') - (3)) / ((2') - (2)) +Cropping is performed in the following 6 steps: -9. Calculate sensor output subwindow to be cropped on CEU by applying sensor -scales to the requested window. +1. Request exactly user rectangle from the sensor. - width_ceu = ((5') - (5)) / scale_s +2. If smaller - iterate until a larger one is obtained. Result: sensor cropped + to 2 : 2', target crop 5 : 5', current output format 6' - 6. -10. Use CEU cropping for above calculated window. +3. In the previous step the sensor has tried to preserve its output frame as + good as possible, but it could have changed. Retrieve it again. -11. Calculate CEU scales from sensor scales from results of (10) and user window -from (3) +4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate + intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2) - scale_ceu = calc_scale(((5') - (5)), &width_u_out) +5. Calculate and apply host scale = (6' - 6) / (4' - 4) -12. Apply CEU scales. +6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5) -- Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 5155700c206b..e831aaca66f8 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -545,12 +545,11 @@ unregister them: This will remove the device nodes from sysfs (causing udev to remove them from /dev). -After video_unregister_device() returns no new opens can be done. - -However, in the case of USB devices some application might still have one -of these device nodes open. You should block all new accesses to read, -write, poll, etc. except possibly for certain ioctl operations like -queueing buffers. +After video_unregister_device() returns no new opens can be done. However, +in the case of USB devices some application might still have one of these +device nodes open. So after the unregister all file operations will return +an error as well, except for the ioctl and unlocked_ioctl file operations: +those will still be passed on since some buffer ioctls may still be needed. When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there. @@ -609,3 +608,135 @@ scatter/gather method (videobuf-dma-sg), DMA with linear access Please see Documentation/video4linux/videobuf for more information on how to use the videobuf layer. + +struct v4l2_fh +-------------- + +struct v4l2_fh provides a way to easily keep file handle specific data +that is used by the V4L2 framework. Using v4l2_fh is optional for +drivers. + +The users of v4l2_fh (in the V4L2 framework, not the driver) know +whether a driver uses v4l2_fh as its file->private_data pointer by +testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. + +Useful functions: + +- v4l2_fh_init() + + Initialise the file handle. This *MUST* be performed in the driver's + v4l2_file_operations->open() handler. + +- v4l2_fh_add() + + Add a v4l2_fh to video_device file handle list. May be called after + initialising the file handle. + +- v4l2_fh_del() + + Unassociate the file handle from video_device(). The file handle + exit function may now be called. + +- v4l2_fh_exit() + + Uninitialise the file handle. After uninitialisation the v4l2_fh + memory can be freed. + +struct v4l2_fh is allocated as a part of the driver's own file handle +structure and is set to file->private_data in the driver's open +function by the driver. Drivers can extract their own file handle +structure by using the container_of macro. Example: + +struct my_fh { + int blah; + struct v4l2_fh fh; +}; + +... + +int my_open(struct file *file) +{ + struct my_fh *my_fh; + struct video_device *vfd; + int ret; + + ... + + ret = v4l2_fh_init(&my_fh->fh, vfd); + if (ret) + return ret; + + v4l2_fh_add(&my_fh->fh); + + file->private_data = &my_fh->fh; + + ... +} + +int my_release(struct file *file) +{ + struct v4l2_fh *fh = file->private_data; + struct my_fh *my_fh = container_of(fh, struct my_fh, fh); + + ... +} + +V4L2 events +----------- + +The V4L2 events provide a generic way to pass events to user space. +The driver must use v4l2_fh to be able to support V4L2 events. + +Useful functions: + +- v4l2_event_alloc() + + To use events, the driver must allocate events for the file handle. By + calling the function more than once, the driver may assure that at least n + events in total have been allocated. The function may not be called in + atomic context. + +- v4l2_event_queue() + + Queue events to video device. The driver's only responsibility is to fill + in the type and the data fields. The other fields will be filled in by + V4L2. + +- v4l2_event_subscribe() + + The video_device->ioctl_ops->vidioc_subscribe_event must check the driver + is able to produce events with specified event id. Then it calls + v4l2_event_subscribe() to subscribe the event. + +- v4l2_event_unsubscribe() + + vidioc_unsubscribe_event in struct v4l2_ioctl_ops. A driver may use + v4l2_event_unsubscribe() directly unless it wants to be involved in + unsubscription process. + + The special type V4L2_EVENT_ALL may be used to unsubscribe all events. The + drivers may want to handle this in a special way. + +- v4l2_event_pending() + + Returns the number of pending events. Useful when implementing poll. + +Drivers do not initialise events directly. The events are initialised +through v4l2_fh_init() if video_device->ioctl_ops->vidioc_subscribe_event is +non-NULL. This *MUST* be performed in the driver's +v4l2_file_operations->open() handler. + +Events are delivered to user space through the poll system call. The driver +can use v4l2_fh->events->wait wait_queue_head_t as the argument for +poll_wait(). + +There are standard and private events. New standard events must use the +smallest available event type. The drivers must allocate their events from +their own class starting from class base. Class base is +V4L2_EVENT_PRIVATE_START + n * 1000 where n is the lowest available number. +The first event type in the class is reserved for future use, so the first +available event type is 'class base + 1'. + +An example on how the V4L2 events may be used can be found in the OMAP +3 ISP driver available at <URL:http://gitorious.org/omap3camera> as of +writing this. diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index be45dbb9d7f2..6690fc34ef6d 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -45,7 +45,7 @@ most general to most specific: to establish the task policy for a child task exec()'d from an executable image that has no awareness of memory policy. See the MEMORY POLICY APIS section, below, for an overview of the system call - that a task may use to set/change it's task/process policy. + that a task may use to set/change its task/process policy. In a multi-threaded task, task policies apply only to the thread [Linux kernel task] that installs the policy and any threads @@ -301,7 +301,7 @@ decrement this reference count, respectively. mpol_put() will only free the structure back to the mempolicy kmem cache when the reference count goes to zero. -When a new memory policy is allocated, it's reference count is initialized +When a new memory policy is allocated, its reference count is initialized to '1', representing the reference held by the task that is installing the new policy. When a pointer to a memory policy structure is stored in another structure, another reference is added, as the task's reference will be dropped diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index e3333eec4320..212f4ac31c01 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -25,7 +25,7 @@ When a w1 master driver registers with the w1 subsystem, the following occurs: - sysfs entries for that w1 master are created - the w1 bus is periodically searched for new slave devices -When a device is found on the bus, w1 core checks if driver for it's family is +When a device is found on the bus, w1 core checks if driver for its family is loaded. If so, the family driver is attached to the slave. If there is no driver for the family, default one is assigned, which allows to perform almost any kind of operations. Each logical operation is a transaction |
