diff options
Diffstat (limited to 'Documentation/ABI/testing')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 11 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-meas-spec | 1 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 | 63 |
3 files changed, 74 insertions, 1 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 8c24d0892f61..2db2cdf42d54 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1425,6 +1425,17 @@ Description: guarantees that the hardware fifo is flushed to the device buffer. +What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: + A read/write property to provide capability to delay reporting of + samples till a timeout is reached. This allows host processors to + sleep, while the sensor is storing samples in its internal fifo. + The maximum timeout in seconds can be specified by setting + hwfifo_timeout.The current delay can be read by reading + hwfifo_timeout. A value of 0 means that there is no timeout. + What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec index 1a6265e92e2f..6d47e548eee5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec +++ b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec @@ -5,4 +5,3 @@ Description: Reading returns either '1' or '0'. '1' means that the battery level supplied to sensor is below 2.25V. This ABI is available for tsys02d, htu21, ms8607 - This ABI is available for htu21, ms8607 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 index 230020e06677..161c147d3c40 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -16,6 +16,54 @@ Description: - "OC2REF" : OC2REF signal is used as trigger output. - "OC3REF" : OC3REF signal is used as trigger output. - "OC4REF" : OC4REF signal is used as trigger output. + Additional modes (on TRGO2 only): + - "OC5REF" : OC5REF signal is used as trigger output. + - "OC6REF" : OC6REF signal is used as trigger output. + - "compare_pulse_OC4REF": + OC4REF rising or falling edges generate pulses. + - "compare_pulse_OC6REF": + OC6REF rising or falling edges generate pulses. + - "compare_pulse_OC4REF_r_or_OC6REF_r": + OC4REF or OC6REF rising edges generate pulses. + - "compare_pulse_OC4REF_r_or_OC6REF_f": + OC4REF rising or OC6REF falling edges generate pulses. + - "compare_pulse_OC5REF_r_or_OC6REF_r": + OC5REF or OC6REF rising edges generate pulses. + - "compare_pulse_OC5REF_r_or_OC6REF_f": + OC5REF rising or OC6REF falling edges generate pulses. + + +-----------+ +-------------+ +---------+ + | Prescaler +-> | Counter | +-> | Master | TRGO(2) + +-----------+ +--+--------+-+ |-> | Control +--> + | | || +---------+ + +--v--------+-+ OCxREF || +---------+ + | Chx compare +----------> | Output | ChX + +-----------+-+ | | Control +--> + . | | +---------+ + . | | . + +-----------v-+ OC6REF | . + | Ch6 compare +---------+> + +-------------+ + + Example with: "compare_pulse_OC4REF_r_or_OC6REF_r": + + X + X X + X . . X + X . . X + X . . X + count X . . . . X + . . . . + . . . . + +---------------+ + OC4REF | . . | + +-+ . . +-+ + . +---+ . + OC6REF . | | . + +-------+ +-------+ + +-+ +-+ + TRGO2 | | | | + +-+ +---+ +---------+ What: /sys/bus/iio/devices/triggerX/master_mode KernelVersion: 4.11 @@ -90,3 +138,18 @@ Description: Counting is enabled on rising edge of the connected trigger, and remains enabled for the duration of this selected mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available +KernelVersion: 4.13 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible trigger modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode +KernelVersion: 4.13 +Contact: benjamin.gaignard@st.com +Description: + Configure the device counter trigger mode + counting direction is set by in_count0_count_direction + attribute and the counter is clocked by the connected trigger + rising edges. |
