diff options
68 files changed, 2133 insertions, 2038 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4692fd3d09d7..f4e8576cb3bf 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -16,11 +16,13 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb # sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb # sam9g45 dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 29b9f15e7599..54cb5cf8604a 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { chosen { @@ -46,7 +46,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 15 0>; + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -90,23 +90,23 @@ compatible = "gpio-leds"; red { - gpios = <&pioC 10 0>; + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; green { - gpios = <&pioA 5 1>; + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; yellow { - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; blue { - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 5160210f74da..3a1de9eb5111 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Somfy Animeo IP"; @@ -123,7 +123,7 @@ usb0: ohci@00500000 { num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 1>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -133,23 +133,23 @@ power_green { label = "power_green"; - gpios = <&pioC 17 0>; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; power_red { label = "power_red"; - gpios = <&pioA 2 0>; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; tx_green { label = "tx_green"; - gpios = <&pioC 19 0>; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; tx_red { label = "tx_red"; - gpios = <&pioC 18 0>; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; }; @@ -160,21 +160,21 @@ keyswitch_in { label = "keyswitch_in"; - gpios = <&pioB 1 0>; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; gpio-key,wakeup; }; error_in { label = "error_in"; - gpios = <&pioB 2 0>; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; gpio-key,wakeup; }; btn { label = "btn"; - gpios = <&pioC 23 0>; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index c7aebba4e8e7..cce45f5177f9 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" +#include "at91sam9g25.dtsi" / { model = "Acme Systems Aria G25"; @@ -21,6 +21,7 @@ serial3 = &usart2; serial4 = &usart3; serial5 = &uart0; + serial6 = &uart1; }; chosen { @@ -112,13 +113,17 @@ status = "okay"; }; + /* + * UART0/1 pins are marked as GPIO on + * Aria documentation. + * Change to "okay" if you need additional serial ports + */ uart0: serial@f8040000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf8040000 0x200>; - interrupts = <15 4 5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; + status = "disabled"; + }; + + uart1: serial@f8044000 { + status = "disabled"; }; adc0: adc@f804c000 { @@ -138,6 +143,10 @@ }; }; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; usb0: ohci@00600000 { @@ -156,7 +165,7 @@ /* little green LED in middle of Aria G25 module */ aria_led { label = "aria_led"; - gpios = <&pioB 8 0>; /* PB8 */ + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ linux,default-trigger = "heartbeat"; }; @@ -164,7 +173,7 @@ onewire@0 { compatible = "w1-gpio"; - gpios = <&pioA 21 1>; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_w1_0>; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts new file mode 100644 index 000000000000..cbe967343997 --- /dev/null +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -0,0 +1,157 @@ +/* + * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board + * + * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) + * + * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Acme Systems FoxG20"; + compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + >; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + + uart0: serial@fffd4000 { + status = "okay"; + }; + + uart1: serial@fffd8000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */ + }; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + i2c-gpio,delay-us = <5>; /* ~85 kHz */ + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + /* red LED marked "PC7" near mini USB (device) receptacle */ + user_led { + label = "user_led"; + gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn { + label = "Button"; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 5d3ed5aafc69..b91cf78f2cf1 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -10,7 +10,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -77,25 +80,29 @@ st: timer@fffffd00 { compatible = "atmel,at91rm9200-st"; reg = <0xfffffd00 0x100>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffa4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa4000 0x100>; - interrupts = <20 4 0 21 4 0 22 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 + 21 IRQ_TYPE_LEVEL_HIGH 0 + 22 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@fffb8000 { compatible = "atmel,at91rm9200-i2c"; reg = <0xfffb8000 0x4000>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; #address-cells = <1>; @@ -106,7 +113,7 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -115,7 +122,7 @@ ssc0: ssc@fffd0000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd0000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disable"; @@ -124,7 +131,7 @@ ssc1: ssc@fffd4000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd4000 0x4000>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disable"; @@ -133,7 +140,7 @@ ssc2: ssc@fffd8000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd8000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; status = "disable"; @@ -142,7 +149,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at91rm9200-emac", "cdns,emac"; reg = <0xfffbc000 0x4000>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; @@ -167,234 +174,310 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A */ - 0 31 0x1 0x1>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = - <0 20 0x1 0x0>; /* PA20 periph A */ + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = - <0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 20 0x1 0x1 /* PB20 periph A with pullup */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; pinctrl_uart1_rts: uart1_rts-0 { atmel,pins = - <1 24 0x1 0x0>; /* PB24 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */ }; pinctrl_uart1_cts: uart1_cts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; pinctrl_uart1_dcd: uart1_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_uart1_ri: uart1_ri-0 { atmel,pins = - <1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; }; uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <0 22 0x1 0x0 /* PA22 periph A */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 31 0x2 0x0>; /* PA31 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */ }; }; uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 6 0x2 0x0>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ }; pinctrl_uart3_rts: uart3_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart3_cts: uart3_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ - 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */ + AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 7 0x1 0x0 /* PA7 periph A */ - 0 8 0x1 0x0 /* PA8 periph A */ - 0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0>; /* PA16 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <1 12 0x2 0x0 /* PB12 periph B */ - 1 13 0x2 0x0 /* PB13 periph B */ - 1 14 0x2 0x0 /* PB14 periph B */ - 1 15 0x2 0x0 /* PB15 periph B */ - 1 16 0x2 0x0 /* PB16 periph B */ - 1 17 0x2 0x0 /* PB17 periph B */ - 1 18 0x2 0x0 /* PB18 periph B */ - 1 19 0x2 0x0>; /* PB19 periph B */ + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */ + AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */ + AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */ + AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */ + AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */ + AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */ + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <1 3 0x2 0x1 /* PB3 periph B with pullup */ - 1 4 0x2 0x1 /* PB4 periph B with pullup */ - 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 8 0x2 0x1 /* PA8 periph B with pullup */ - 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 10 0x2 0x1 /* PA10 periph B with pullup */ - 0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0>; /* PB2 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; ssc2 { pinctrl_ssc2_tx: ssc2_tx-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0>; /* PB14 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */ }; pinctrl_ssc2_rx: ssc2_rx-0 { atmel,pins = - <1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; twi { pinctrl_twi: twi-0 { atmel,pins = - <0 25 0x1 0x2 /* PA25 periph A with multi drive */ - 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */ }; pinctrl_twi_gpio: twi_gpio-0 { atmel,pins = - <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ - 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */ + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -404,7 +487,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -414,7 +497,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +507,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -435,7 +518,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -444,7 +527,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -455,7 +538,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -466,7 +549,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -477,7 +560,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -488,7 +571,7 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; - interrupts = <11 4 2>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; @@ -503,9 +586,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; nand-ecc-mode = "soft"; - gpios = <&pioC 2 0 + gpios = <&pioC 2 GPIO_ACTIVE_HIGH 0 - &pioB 1 0 + &pioB 1 GPIO_ACTIVE_HIGH >; status = "disabled"; }; @@ -513,15 +596,15 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; - interrupts = <23 4 2>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ + &pioA 26 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e586d85f8e23..14058125d123 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; @@ -50,7 +50,7 @@ }; usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 0>; + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -66,19 +66,19 @@ ds2 { label = "green"; - gpios = <&pioB 0 0x1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; - gpios = <&pioB 1 0x1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; - gpios = <&pioB 2 0x1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 84c4bef2d726..cae3ba5d18c7 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -84,19 +87,23 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 0 27 4 0 28 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 + 27 IRQ_TYPE_LEVEL_HIGH 0 + 28 IRQ_TYPE_LEVEL_HIGH 0>; }; pinctrl@fffff400 { @@ -116,234 +123,318 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 27 0x1 0x0>; /* PB27 periph A */ + <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */ }; pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A */ - 1 22 0x1 0x0>; /* PB22 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */ }; pinctrl_usart0_dcd: usart0_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_usart0_ri: usart0_ri-0 { atmel,pins = - <1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <1 28 0x1 0x0>; /* PB28 periph A */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <1 29 0x1 0x0>; /* PB29 periph A */ + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 8 0x1 0x1 /* PB8 periph A with pullup */ - 1 9 0x1 0x0>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 10 0x1 0x1 /* PB10 periph A with pullup */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 8 0x2 0x0>; /* PC8 periph B */ + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 10 0x2 0x0>; /* PC10 periph B */ + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 31 0x2 0x1 /* PA31 periph B with pullup */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 12 0x1 0x1 /* PB12 periph A with pullup */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0 /* PA19 periph A */ - 0 20 0x1 0x0 /* PA20 periph A */ - 0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 22 0x2 0x0 /* PA22 periph B */ - 0 23 0x2 0x0 /* PA23 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { atmel,pins = - <0 10 0x2 0x0 /* PA10 periph B */ - 0 11 0x2 0x0 /* PA11 periph B */ - 0 22 0x2 0x0 /* PA22 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 1 0x2 0x1 /* PA1 periph B with pullup */ - 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */ + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 4 0x2 0x1 /* PA4 periph B with pullup */ - 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0 /* PB17 periph A */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 20 0x1 0x0 /* PB20 periph A */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ - 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ - 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE + AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -353,7 +444,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -363,7 +454,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +465,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -383,7 +474,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -394,7 +485,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -405,7 +496,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -416,7 +507,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -427,7 +518,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4 5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -438,7 +529,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4 5>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -449,7 +540,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -458,14 +549,14 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4 2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fffac000 { compatible = "atmel,at91sam9260-i2c"; reg = <0xfffac000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,7 +565,7 @@ mmc0: mmc@fffa8000 { compatible = "atmel,hsmci"; reg = <0xfffa8000 0x600>; - interrupts = <9 4 0>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -483,7 +574,7 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -494,7 +585,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffc8000 0x200>; - interrupts = <12 4 3>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -505,7 +596,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffcc000 0x200>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -514,7 +605,7 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -567,8 +658,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 0 - &pioC 14 0 + gpios = <&pioC 13 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -577,21 +668,23 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4 2>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 94b58ab2cc08..ff638116db14 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -6,7 +6,10 @@ * Licensed under GPLv2 only. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -72,13 +75,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; }; rstc@fffffd00 { @@ -110,221 +113,259 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <2 30 0x1 0x0 /* PC30 periph A */ - 2 31 0x1 0x1>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 26 0x1 0x1 /* PA26 periph A with pullup */ - 0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 28 0x1 0x0>; /* PA28 periph A */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 29 0x1 0x0>; /* PA29 periph A */ + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <3 0 0x1 0x1 /* PD0 periph A with pullup */ - 3 1 0x1 0x0>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 7 0x2 0x0>; /* PD7 periph B */ + <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PD8 periph B */ + <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A with pullup */ - 3 3 0x1 0x0>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <3 5 0x2 0x0>; /* PD5 periph B */ + <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <4 6 0x2 0x0>; /* PD6 periph B */ + <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ - 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ + AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <2 25 0x2 0x0 /* PC25 periph B */ - 4 21 0x1 0x0 /* PE21 periph A */ - 4 23 0x1 0x0 /* PE23 periph A */ - 4 24 0x1 0x0 /* PE24 periph A */ - 4 25 0x1 0x0 /* PE25 periph A */ - 4 26 0x1 0x0 /* PE26 periph A */ - 4 27 0x1 0x0 /* PE27 periph A */ - 4 28 0x1 0x0 /* PE28 periph A */ - 4 29 0x1 0x0 /* PE29 periph A */ - 4 30 0x1 0x0>; /* PE30 periph A */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 22 0x2 0x0 /* PC22 periph B */ - 2 23 0x2 0x0 /* PC23 periph B */ - 2 24 0x2 0x0 /* PC24 periph B */ - 2 25 0x2 0x0 /* PC25 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 4 22 0x2 0x0>; /* PE22 periph B */ + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ + AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ + AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 12 0x1 0x0>; /* PA12 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_clk: mmc1_clk-0 { atmel,pins = - <0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { atmel,pins = - <0 21 0x1 0x1 /* PA21 periph A with pullup */ - 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ }; pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { atmel,pins = - <0 23 0x1 0x1 /* PA23 periph A with pullup */ - 0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x2 0x0 /* PB0 periph B */ - 1 1 0x2 0x0 /* PB1 periph B */ - 1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ + AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ + AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x2 0x0 /* PB3 periph B */ - 1 4 0x2 0x0 /* PB4 periph B */ - 1 5 0x2 0x0>; /* PB5 periph B */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ - 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ - 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ - 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ - 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -334,7 +375,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -344,7 +385,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +395,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +405,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -375,7 +416,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -384,7 +425,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -395,7 +436,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -406,7 +447,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -417,7 +458,7 @@ ssc0: ssc@fff98000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -426,7 +467,7 @@ ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -435,7 +476,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -444,14 +485,14 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4 2>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fff88000 { compatible = "atmel,at91sam9263-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -460,7 +501,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,7 +510,7 @@ mmc1: mmc@fff84000 { compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -486,7 +527,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -497,7 +538,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -515,8 +556,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 0 - &pioD 15 0 + gpios = <&pioA 22 GPIO_ACTIVE_HIGH + &pioD 15 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -525,15 +566,15 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4 2>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 3b82d91e7fcc..70f835b55c0b 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Atmel at91sam9263ek"; @@ -51,7 +51,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 0>; + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -65,8 +65,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioE 18 0>; - wp-gpios = <&pioE 19 0>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; }; }; @@ -74,8 +74,8 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ - 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ + AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ }; }; }; @@ -89,6 +89,10 @@ reg = <0>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -141,8 +145,8 @@ usb0: ohci@00a00000 { num-ports = <2>; status = "okay"; - atmel,vbus-gpio = <&pioA 24 0 - &pioA 21 0 + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH >; }; }; @@ -152,13 +156,13 @@ d3 { label = "d3"; - gpios = <&pioB 7 0>; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d2 { label = "d2"; - gpios = <&pioC 29 1>; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; }; @@ -168,14 +172,14 @@ left_click { label = "left_click"; - gpios = <&pioC 5 1>; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioC 4 1>; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 28467fd6bf96..cfd7044616d7 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 5427b2dba87e..26b0444b0f96 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g15.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g15.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 75ce6e760016..b8e79466014f 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index e5324bf9d529..bbfd753112c9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek"; @@ -17,13 +17,13 @@ ds1 { label = "ds1"; - gpios = <&pioA 9 0>; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioA 6 1>; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index 66467b113126..bdb799bad179 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek 2 mmc"; @@ -23,7 +23,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioC 2 0>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; }; }; @@ -31,7 +31,7 @@ mmc0_slot0 { pinctrl_board_mmc0_slot0: mmc0_slot0-board { atmel,pins = - <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */ }; }; }; @@ -43,13 +43,13 @@ ds1 { label = "ds1"; - gpios = <&pioB 9 0>; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioB 8 1>; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6a92c5baef8c..137354689ad0 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,7 +5,7 @@ * * Licensed under GPLv2. */ -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -34,10 +34,17 @@ board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ }; }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; }; dbgu: serial@fffff200 { @@ -65,7 +72,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,16 +86,7 @@ slot@1 { reg = <1>; bus-width = <4>; - cd-gpios = <&pioC 9 0>; - }; - }; - - pinctrl@fffff400 { - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ - }; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; }; }; @@ -106,6 +104,10 @@ reg = <1>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -180,14 +182,14 @@ btn3 { label = "Button 3"; - gpios = <&pioA 30 1>; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { label = "Button 4"; - gpios = <&pioA 31 1>; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 5fd32df03f25..b4ec6fe53fc7 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a1c511fecdc1..1e4c49c584d3 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index d6fa8af50724..bebf9f55614b 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 6f58ab8d21f5..641a9bf89ed1 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G35-EK"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bf18a735c37d..faec17d1bb33 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -83,7 +86,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -95,19 +98,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -130,221 +133,297 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 19 0x1 0x1 /* PB19 periph A with pullup */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 17 0x2 0x0>; /* PB17 periph B */ + <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 15 0x2 0x0>; /* PB15 periph B */ + <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ }; }; uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 4 0x1 0x1 /* PB4 periph A with pullup */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 16 0x1 0x0>; /* PD16 periph A */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 17 0x1 0x0>; /* PD17 periph A */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <2 9 0x2 0x0>; /* PC9 periph B */ + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <2 11 0x2 0x0>; /* PC11 periph B */ + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 8 0x1 0x1 /* PB9 periph A with pullup */ - 1 9 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <0 23 0x2 0x0>; /* PA23 periph B */ + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <0 24 0x2 0x0>; /* PA24 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0>; /* PA19 periph A */ + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 6 0x2 0x0 /* PA6 periph B */ - 0 7 0x2 0x0 /* PA7 periph B */ - 0 8 0x2 0x0 /* PA8 periph B */ - 0 9 0x2 0x0 /* PA9 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0 /* PA29 periph B */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ + AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A */ - 0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 31 0x1 0x0 /* PA31 periph A */ - 0 22 0x1 0x1 /* PA22 periph A with pullup */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1 /* PA25 periph A with pullup */ - 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = - <0 27 0x1 0x1 /* PA27 periph A with pullup */ - 0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1 /* PA29 periph A with pullup */ - 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A */ - 3 1 0x1 0x0 /* PD1 periph A */ - 3 2 0x1 0x0>; /* PD2 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <3 3 0x1 0x0 /* PD3 periph A */ - 3 4 0x1 0x0 /* PD4 periph A */ - 3 5 0x1 0x0>; /* PD5 periph A */ + <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ + AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A */ - 3 11 0x1 0x0 /* PD11 periph A */ - 3 12 0x1 0x0>; /* PD12 periph A */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <3 13 0x1 0x0 /* PD13 periph A */ - 3 14 0x1 0x0 /* PD14 periph A */ - 3 15 0x1 0x0>; /* PD15 periph A */ + <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ - 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ - 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +433,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +443,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +453,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -384,7 +463,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -395,7 +474,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -404,7 +483,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -415,7 +494,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -426,7 +505,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -437,7 +516,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4 5>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -448,7 +527,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -457,7 +536,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -466,7 +545,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -475,7 +554,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -484,7 +563,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -493,7 +572,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -533,7 +612,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -544,7 +623,7 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 4 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 13>; dma-names = "rxtx"; #address-cells = <1>; @@ -592,8 +671,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -602,22 +681,22 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 0 /* sda */ - &pioA 21 0 /* scl */ + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 51d9251b5bbe..91dbf791d2c6 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Atmel AT91SAM9M10G45-EK"; @@ -59,6 +59,10 @@ status = "okay"; }; + watchdog@fffffd40 { + status = "okay"; + }; + mmc0: mmc@fff80000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -68,7 +72,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 10 0>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +85,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 11 0>; - wp-gpios = <&pioD 29 0>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; }; }; @@ -90,15 +94,15 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ - 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ + AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; }; @@ -139,8 +143,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 1 - &pioD 3 1>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { @@ -153,19 +157,19 @@ d8 { label = "d8"; - gpios = <&pioD 30 0>; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d6 { label = "d6"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 1>; + gpios = <&pioD 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; }; @@ -175,45 +179,45 @@ left_click { label = "left_click"; - gpios = <&pioB 6 1>; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioB 7 1>; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; left { label = "Joystick Left"; - gpios = <&pioB 14 1>; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; right { label = "Joystick Right"; - gpios = <&pioB 15 1>; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "Joystick Up"; - gpios = <&pioB 16 1>; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; down { label = "Joystick Down"; - gpios = <&pioB 17 1>; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; enter { label = "Joystick Press"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 8d25f889928e..1d220b26f516 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -7,7 +7,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -78,7 +81,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; shdwc@fffffe10 { @@ -89,7 +92,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -100,19 +103,19 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -134,159 +137,235 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x0>; /* PA0 periph A */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 7 0x1 0x0>; /* PA7 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC23 periph B with pullup */ - 2 22 0x2 0x0>; /* PC22 periph B */ + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 9 0x3 0x1 /* PC9 periph C with pullup */ - 2 8 0x3 0x0>; /* PC8 periph C */ + <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */ + AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x1 /* PC17 periph C with pullup */ - 2 17 0x3 0x0>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ - 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 13 0x2 0x1 /* PA13 periph B with pullup */ - 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */ + AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -296,7 +375,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -306,7 +385,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -316,7 +395,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -327,7 +406,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -336,7 +415,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -345,7 +424,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -354,7 +433,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -363,7 +442,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -372,7 +451,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -381,7 +460,7 @@ i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 13>, <&dma 1 14>; dma-names = "tx", "rx"; @@ -393,7 +472,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 15>, <&dma 1 16>; dma-names = "tx", "rx"; @@ -407,7 +486,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -418,11 +497,17 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -439,8 +524,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -449,15 +534,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d30e48bd1e9d..d59b70c6a6a0 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9n12.dtsi" +#include "at91sam9n12.dtsi" / { model = "Atmel AT91SAM9N12-EK"; @@ -55,7 +55,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioA 7 0>; + cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; }; }; @@ -63,7 +63,7 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; }; @@ -77,6 +77,10 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -95,19 +99,19 @@ d8 { label = "d8"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; d9 { label = "d6"; - gpios = <&pioB 5 1>; + gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { label = "d7"; - gpios = <&pioB 6 0>; + gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -117,7 +121,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 9ac2bc2b4f07..49e94aba938f 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -26,16 +26,16 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 16 0x2 0x0 /* PC16 periph B */ - 2 18 0x2 0x0 /* PC18 periph B */ - 2 19 0x2 0x0 /* PC19 periph B */ - 2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 2 28 0x2 0x0 /* PC28 periph B */ - 2 29 0x2 0x0 /* PC29 periph B */ - 2 30 0x2 0x0 /* PC30 periph B */ - 2 31 0x2 0x0>; /* PC31 periph B */ + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 315250b4995e..494864836e83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X25-EK"; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index ba67d83d17ac..1a3d525a1f5d 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 6ad19a0d5424..343d32818ca3 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X35-EK"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1145ac330fb7..e77106ef2ee5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -85,32 +88,32 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -124,297 +127,373 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; pinctrl_usart3_sck: usart3_sck-0 { atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +503,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; @@ -435,7 +514,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -445,7 +524,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; @@ -457,7 +536,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -466,7 +545,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -477,7 +556,7 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -488,7 +567,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -497,7 +576,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -506,7 +585,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -515,7 +594,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -524,7 +603,7 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; @@ -533,14 +612,14 @@ macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 7>, <&dma0 1 8>; dma-names = "tx", "rx"; @@ -554,7 +633,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 1 5>, <&dma1 1 6>; dma-names = "tx", "rx"; @@ -568,7 +647,7 @@ i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 9>, <&dma0 1 10>; dma-names = "tx", "rx"; @@ -579,10 +658,28 @@ status = "disabled"; }; + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + uart1: serial@f8044000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8044000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -625,7 +722,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -636,16 +733,22 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; + rtc@fffffeb0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; }; @@ -664,8 +767,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -674,22 +777,22 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -703,8 +806,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -718,8 +821,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 347a74a857f6..4a5ee5cc115a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -28,7 +28,7 @@ pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { - atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ }; }; }; @@ -75,19 +75,19 @@ pb18 { label = "pb18"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; pd21 { label = "pd21"; - gpios = <&pioD 21 0>; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; }; 1wire_cm { compatible = "w1-gpio"; - gpios = <&pioB 18 0>; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; linux,open-drain; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_1wire_cm>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 1fa48d2bfd80..5930b0eb68a7 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "at91sam9x5cm.dtsi" +#include "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; @@ -27,7 +27,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 15 0>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; }; }; @@ -40,7 +40,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 14 0>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; }; }; @@ -60,14 +60,14 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; @@ -81,13 +81,17 @@ reg = <0>; }; }; + + watchdog@fffffe40 { + status = "okay"; + }; }; usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 + atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 1ea9d34460a4..143b6d25bc80 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Ethernut 5"; @@ -40,7 +40,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -52,7 +52,7 @@ status = "okay"; gpios = <0 - &pioC 14 0 + &pioC 14 GPIO_ACTIVE_HIGH 0 >; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 96e50f569433..4d829685fdfb 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; @@ -31,7 +31,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -50,4 +50,4 @@ status = "okay"; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 17136fc7a516..230099bb31c8 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { clocks { diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3ec..02df1914a47c 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -94,26 +94,26 @@ led1g { label = "led1:green"; - gpios = <&pioB 0 1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led1r { label = "led1:red"; - gpios = <&pioB 1 1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led2g { label = "led2:green"; - gpios = <&pioB 2 1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; led2r { label = "led2:red"; - gpios = <&pioB 3 1>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; @@ -125,16 +125,16 @@ reset { label = "reset"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; linux,code = <0x100>; gpio-key,wakeup; }; mode { label = "mode"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; linux,code = <0x101>; gpio-key,wakeup; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 317300875f34..ccf9ea242f72 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Phontech MPA 1600"; @@ -62,7 +62,7 @@ monitor_mute { label = "Monitor mute"; - gpios = <&pioC 1 1>; + gpios = <&pioC 1 GPIO_ACTIVE_LOW>; linux,code = <113>; }; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 387fedb58988..33ffabe9c4c8 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Ronetix pm9g45"; @@ -42,15 +42,15 @@ board { pinctrl_board_nand: nand0-board { atmel,pins = - <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; mmc { pinctrl_board_mmc: mmc0-board { atmel,pins = - <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */ }; }; }; @@ -64,7 +64,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 6 0>; + cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ nand-on-flash-bbt; pinctrl-0 = <&pinctrl_board_nand>; - gpios = <&pioD 3 0 - &pioC 14 0 + gpios = <&pioD 3 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; @@ -134,13 +134,13 @@ led0 { label = "led0"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; led1 { label = "led1"; - gpios = <&pioD 31 0>; + gpios = <&pioD 31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -152,13 +152,13 @@ right { label = "SW4"; - gpios = <&pioE 7 1>; + gpios = <&pioE 7 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "SW3"; - gpios = <&pioE 8 1>; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; linux,code = <103>; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5000e0d42849..d5922935523f 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -59,7 +62,7 @@ mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -74,7 +77,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -83,7 +86,7 @@ ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; - interrupts = <38 4 4>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -92,7 +95,7 @@ can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; - interrupts = <40 4 3>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; status = "disabled"; @@ -101,13 +104,13 @@ tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; - interrupts = <18 4 6>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 7>, <&dma0 2 8>; dma-names = "tx", "rx"; @@ -121,7 +124,7 @@ i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; - interrupts = <19 4 6>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 9>, <&dma0 2 10>; dma-names = "tx", "rx"; @@ -135,7 +138,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -144,7 +147,7 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; - interrupts = <13 4 5>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -153,7 +156,7 @@ macb0: ethernet@f0028000 { compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; - interrupts = <34 4 3>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; status = "disabled"; @@ -162,14 +165,14 @@ isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; - interrupts = <37 4 5>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; status = "disabled"; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; - interrupts = <22 4 0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -182,7 +185,7 @@ mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; - interrupts = <23 4 0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 1>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -197,7 +200,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -206,7 +209,7 @@ ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; - interrupts = <39 4 4>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -215,7 +218,7 @@ can1: can@f8010000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8010000 0x300>; - interrupts = <41 4 3>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; }; @@ -223,13 +226,13 @@ tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; - interrupts = <27 4 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; }; adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg @@ -283,7 +286,7 @@ tsadcc: tsadcc@f8018000 { compatible = "atmel,at91sam9x5-tsadcc"; reg = <0xf8018000 0x4000>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; atmel,tsadcc_clock = <300000>; atmel,filtering_average = <0x03>; atmel,pendet_debounce = <0x08>; @@ -295,7 +298,7 @@ i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; - interrupts = <20 4 6>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 2 11>, <&dma1 2 12>; dma-names = "tx", "rx"; @@ -307,7 +310,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -316,7 +319,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -325,7 +328,7 @@ macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <35 4 3>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; status = "disabled"; @@ -334,7 +337,7 @@ sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { @@ -346,20 +349,20 @@ tdes@f803c000 { compatible = "atmel,sam9g46-tdes"; reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; - interrupts = <30 4 0>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; - interrupts = <31 4 0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -371,7 +374,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <2 4 7>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -403,202 +406,202 @@ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = - <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = - <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = - <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = - <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = - <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = - <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = - <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = - <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = - <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = - <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = - <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = - <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = - <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; can0 { pinctrl_can0_rx_tx: can0_rx_tx { atmel,pins = - <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ }; }; can1 { pinctrl_can1_rx_tx: can1_rx_tx { atmel,pins = - <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ - 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 30 0x1 0x0 /* PB30 periph A */ - 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ - 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ - 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; }; isi { pinctrl_isi: isi-0 { atmel,pins = - <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ - 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ - 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ - 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ - 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ - 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ - 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ - 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ - 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ - 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ - 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { atmel,pins = - <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ }; }; lcd { pinctrl_lcd: lcd-0 { atmel,pins = - <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ - 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ - 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ - 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ - 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ - 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ - 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ - 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ - 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ - 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ - 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ - 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ - 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ - 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ - 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ - 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ - 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ - 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ - 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ - 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ - 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ - 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ - 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ - 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ - 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ - 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ - 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ - 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ - 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ - 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ }; }; macb0 { pinctrl_macb0_data_rgmii: macb0_data_rgmii { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ - 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ - 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ - 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ - 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ - 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ - 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ - 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ }; pinctrl_macb0_data_gmii: macb0_data_gmii { atmel,pins = - <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ - 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ - 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ }; pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ - 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ }; pinctrl_macb0_signal_gmii: macb0_signal_gmii { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ - 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ }; }; @@ -606,252 +609,251 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ - 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ - 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ - 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ - 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ - 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ - 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ - 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ - 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = - <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ - 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ - 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ - 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ - 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = - <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ - 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ - 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ - 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ - 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = - <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ - 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ - 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; mmc2 { pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { atmel,pins = - <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ - 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = - <4 21 0x1 0x1 /* PE21 periph A with pullup */ - 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <6 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioB: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <7 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioC: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <8 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioD: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <9 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioE: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <10 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ - 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ - 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ - 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ - 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ - 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ - 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = - <2 16 0x1 0x0 /* PC16 periph A TK0 */ - 2 17 0x1 0x0 /* PC17 periph A TF0 */ - 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = - <2 19 0x1 0x0 /* PC19 periph A RK0 */ - 2 20 0x1 0x0 /* PC20 periph A RF0 */ - 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = - <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ - 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ - 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = - <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ - 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ - 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <3 17 0x1 0x0 /* PD17 periph A */ - 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = - <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ - 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 28 0x1 0x0 /* PB28 periph A */ - 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = - <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ - 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ - 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = - <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ - 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ - 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = - <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ - 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ }; }; + + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmc: pmc@fffffc00 { @@ -867,7 +869,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <3 4 5>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; }; watchdog@fffffe40 { @@ -879,7 +881,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; }; @@ -889,7 +891,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; - interrupts = <33 4 2>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; ep0 { @@ -1001,14 +1003,14 @@ usb1: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb2: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; @@ -1024,7 +1026,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; - interrupts = <5 4 6>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index fa5d216f1db7..027bac7510b6 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; @@ -41,7 +41,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c38c9433d7a5..99bd0c8e0471 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 6bebfcdcb1d1..fb8ee11cf282 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; @@ -51,7 +51,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index a488fc4e9777..509a53d9cc7b 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" +#include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; @@ -48,7 +48,7 @@ pb_user1 { label = "pb_user1"; - gpios = <&pioE 27 0>; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b336e7787cb3..1f8050813a54 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3.dtsi" +#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -89,7 +89,7 @@ d2 { label = "d2"; - gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 4b8830eb2060..1c296d6b2f2a 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -33,7 +33,7 @@ board { pinctrl_qt1070_irq: qt1070_irq { atmel,pins = - <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 661d7ca9c309..8a9e05d8a4b8 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3xcm.dtsi" +#include "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -20,7 +20,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 17 0>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; @@ -62,7 +62,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 18 0>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; @@ -87,32 +87,32 @@ board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = - <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = - <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = - <3 30 0x2 0x0>; /* PD30 periph B */ + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = - <4 24 0x0 0x0>; /* PE24 gpio */ + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = - <4 29 0x0 0x0>; /* PE29 gpio */ + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = - <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ }; }; }; @@ -127,7 +127,7 @@ }; usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioD 29 0>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -135,9 +135,9 @@ usb1: ohci@00600000 { num-ports = <3>; - atmel,vbus-gpio = <&pioD 25 0 - &pioD 26 1 - &pioD 27 1 + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW >; status = "okay"; }; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index 367a16dcd5ef..dabe232216b4 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9260"; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index dee9c571306b..0751a6a979a8 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao TNY A9263"; @@ -38,7 +38,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index e1ab64c72dba..8456d70bb42b 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9G20"; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index 296216058c11..de0c24f5210a 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9260"; @@ -20,4 +20,13 @@ memory { reg = <0x20000000 0x4000000>; }; + + ahb { + apb { + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index e70d229baef5..285977682cf3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -30,7 +30,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -93,7 +93,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -105,7 +105,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 6fe05ccb6203..290e60383baf 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao USB A9263"; @@ -43,10 +43,24 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; + spi0: spi@fffa4000 { + cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; }; nand0: nand@40000000 { @@ -107,7 +121,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 0>; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -119,7 +133,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index ad3eca17c436..5b0ffc1a0b24 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -28,39 +28,39 @@ user_led1 { label = "user_led1"; - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; }; /* * led already used by mother board but active as high * user_led2 { * label = "user_led2"; -* gpios = <&pioB 21 1>; +* gpios = <&pioB 21 GPIO_ACTIVE_LOW>; * }; */ user_led3 { label = "user_led3"; - gpios = <&pioB 22 1>; + gpios = <&pioB 22 GPIO_ACTIVE_LOW>; }; user_led4 { label = "user_led4"; - gpios = <&pioB 23 1>; + gpios = <&pioB 23 GPIO_ACTIVE_LOW>; }; red { label = "red"; - gpios = <&pioB 24 1>; + gpios = <&pioB 24 GPIO_ACTIVE_LOW>; }; orange { label = "orange"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; }; green { label = "green"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; }; }; @@ -71,25 +71,25 @@ user_pb1 { label = "user_pb1"; - gpios = <&pioB 25 1>; + gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; user_pb2 { label = "user_pb2"; - gpios = <&pioB 13 1>; + gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; user_pb3 { label = "user_pb3"; - gpios = <&pioA 26 1>; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; user_pb4 { label = "user_pb4"; - gpios = <&pioC 9 1>; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 2dacb16ce4ae..ec77cf8f9695 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,25 +6,9 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "usb_a9g20_common.dtsi" / { model = "Calao USB A9G20"; compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - i2c@0 { - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; - }; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi new file mode 100644 index 000000000000..0b3b36182fe5 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -0,0 +1,27 @@ +/* + * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" + +/ { + chosen { + bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + i2c@0 { + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; + }; + }; +}; diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts new file mode 100644 index 000000000000..f8cb1b9a01c5 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20_lpw.dts @@ -0,0 +1,31 @@ +/* + * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "usb_a9g20_common.dtsi" + +/ { + model = "Calao USB A9G20 Low Power"; + compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; + + ahb { + apb { + spi1: spi@fffcc000 { + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + mmc-slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + voltage-ranges = <3200 3400>; + spi-max-frequency = <25000000>; + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + }; + }; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 047f2a415309..75fd842d4071 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -42,6 +39,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -51,7 +51,8 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_93CX6=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -92,7 +91,23 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_DAVICOM_PHY=y CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTLWIFI=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192CU=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 @@ -112,13 +127,11 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SSB=m CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y @@ -146,16 +156,12 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=m -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_CDC=y +CONFIG_USB_AT91=y +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -164,20 +170,23 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set @@ -192,7 +201,7 @@ CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_ITU_T=y CONFIG_CRC7=m CONFIG_AVERAGE=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 4ae57a34a582..8b099349c4b1 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -1,10 +1,12 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100 # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_AT91_CF=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y -CONFIG_XFRM_USER=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_TUN=m +CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y -CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=y -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=y CONFIG_GPIO_SYSFS=y -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91RM9200_WATCHDOG=y @@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_REISERFS_FS=y +CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y +CONFIG_XZ_DEC_ARMTHUMB=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 892e8287ed73..69b6928d3d9d 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -11,7 +10,14 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y CONFIG_MACH_CPU9G20=y @@ -20,10 +26,10 @@ CONFIG_MACH_PORTUXG20=y CONFIG_MACH_STAMP9G20=y CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y -CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y CONFIG_LEDS=y @@ -33,12 +39,14 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set @@ -46,8 +54,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y @@ -56,6 +67,8 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -63,23 +76,36 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -94,12 +120,11 @@ CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -109,15 +134,12 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -125,3 +147,9 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_AT91_DEBUG_LL_DBGU0=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig deleted file mode 100644 index 05618eb694f8..000000000000 --- a/arch/arm/configs/at91sam9260_defconfig +++ /dev/null @@ -1,91 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_ARCH_AT91SAM9260_SAM9XE=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_MACH_CAM60=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_MACH_CPU9260=y -CONFIG_MACH_FLEXIBITY=y -CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM9_DT=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_9g10_defconfig index c87beb973b37..9d35cd81c611 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_9g10_defconfig @@ -17,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y +CONFIG_MACH_AT91SAM9G10EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -38,11 +39,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y -CONFIG_LIB80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y @@ -51,17 +52,13 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_USB_ZD1201=m CONFIG_RTL8187=m CONFIG_LIBERTAS=m @@ -118,15 +115,11 @@ CONFIG_SND_AT73C213=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y @@ -147,12 +140,10 @@ CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_FTRACE=y CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 36fed66bd4b5..e40026364e57 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,6 +1,4 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set -CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -17,7 +15,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y -CONFIG_MACH_USB_A9263=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -48,9 +45,11 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -65,7 +64,6 @@ CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y @@ -73,23 +71,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -98,6 +91,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -107,9 +101,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -124,16 +118,12 @@ CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set CONFIG_SND_USB_AUDIO=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=m @@ -145,22 +135,18 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_FUSE_FS=m +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_FTRACE=y +CONFIG_NLS_UTF8=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 18964cdacd68..08166cd4e7d6 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -23,8 +22,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -36,6 +33,9 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -45,9 +45,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -CONFIG_CFG80211=y -CONFIG_LIB80211=y -CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -61,13 +58,14 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -76,67 +74,40 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y CONFIG_DAVICOM_PHY=y -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AT76C50X_USB=m -CONFIG_USB_ZD1201=m -CONFIG_RTL8187=m -CONFIG_ATH_COMMON=m -CONFIG_ATH9K=m -CONFIG_CARL9170=m -CONFIG_B43=m -CONFIG_B43_PHY_N=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -CONFIG_RT2X00=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RTL8192CU=m -CONFIG_WL1251=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX_MENU=m -CONFIG_WL12XX=m -CONFIG_WL12XX_SDIO=m -CONFIG_ZD1211RW=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_QT2160=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATMEL=y -CONFIG_FB_UDL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_BACKLIGHT_ATMEL_PWM=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -148,33 +119,25 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_ARM is not set CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_MULTI=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_MULTI=y CONFIG_USB_G_MULTI_CDC=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_LEDS_ATMEL_PWM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y @@ -184,17 +147,14 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y @@ -203,6 +163,8 @@ CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 4d0dc3c16063..f6e78f83c3c3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -26,7 +26,9 @@ CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -39,6 +41,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -68,6 +73,8 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -95,7 +102,19 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_RTL8187=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -133,9 +152,13 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=y -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ATMELMCI=y @@ -151,18 +174,18 @@ CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 6c24985515a2..6cd554a4e73c 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,15 +14,11 @@ config ARCH_AT91RM9200 select SOC_AT91RM9200 config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" + bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" + bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 config ARCH_AT91SAM9263 @@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 @@ -50,6 +42,14 @@ config ARCH_AT91X40 endchoice +config ARCH_AT91SAM9G20 + bool + select ARCH_AT91SAM9260 + +config ARCH_AT91SAM9G10 + bool + select ARCH_AT91SAM9261 + # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -183,12 +183,6 @@ config MACH_AFEB9260 <svn://194.85.238.22/home/users/george/svn/arm9eb> <http://groups.google.com/group/arm9fpga-evolution-board> -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" help @@ -207,76 +201,6 @@ config MACH_FLEXIBITY Select this if you are using Flexibity Connect board <http://www.flexibity.com> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G20 - comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK @@ -334,24 +258,64 @@ config MACH_GSIA18S produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> endif -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 788562dccb43..d07bcfad4441 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o @@ -55,7 +53,6 @@ obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o @@ -67,7 +64,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o @@ -80,7 +76,6 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o -obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b446645c7727..d3437624ca4e 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {} */ static struct at73c213_board_info at73c213_data = { .ssc_id = 1, -#if defined(CONFIG_MACH_AT91SAM9261EK) - .shortname = "AT91SAM9261-EK external DAC", -#else - .shortname = "AT91SAM9G10-EK external DAC", -#endif + .shortname = "AT91SAM9261/9G10-EK external DAC", }; #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) @@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_stn_monspecs, .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #else @@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_tft_monspecs, .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #endif @@ -574,6 +564,10 @@ static void __init ek_board_init(void) /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); at91_add_device_serial(); + + if (cpu_is_at91sam9g10()) + ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; + /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ @@ -606,11 +600,17 @@ static void __init ek_board_init(void) at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } -#if defined(CONFIG_MACH_AT91SAM9261EK) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -#else + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") -#endif /* Maintainer: Atmel */ .init_time = at91sam926x_pit_init, .map_io = at91_map_io, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c deleted file mode 100644 index 2487d944a1bc..000000000000 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-usb-a926x.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2007 Calao-systems - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "at91_shdwc.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.00 MHz crystal */ - at91_initialize(12000000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PB11, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -static void __init ek_add_device_udc(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_udc_data.vbus_pin = AT91_PIN_PC5; - - at91_add_device_udc(&ek_udc_data); -} - -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) -#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4 -static int at91_mmc_spi_init(struct device *dev, - irqreturn_t (*detect_int)(int, void *), void *data) -{ - /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0); - return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-spi-detect", data); -} - -static void at91_mmc_spi_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data); -} - -static struct mmc_spi_platform_data at91_mmc_spi_pdata = { - .init = at91_mmc_spi_init, - .exit = at91_mmc_spi_exit, - .detect_delay = 100, /* msecs */ -}; -#endif - -/* - * SPI devices. - */ -static struct spi_board_info usb_a9263_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - } -}; - -static struct spi_board_info usb_a9g20_spi_devices[] = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) - { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 0, - .platform_data = &at91_mmc_spi_pdata, - .mode = SPI_MODE_3, - }, -#endif -}; - -static void __init ek_add_device_spi(void) -{ - if (machine_is_usb_a9263()) - at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices)); - else if (machine_is_usb_a9g20()) - at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices)); -} - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - -static void __init ek_add_device_eth(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_macb_data.phy_irq_pin = AT91_PIN_PA31; - - at91_add_device_eth(&ek_macb_data); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "barebox", - .offset = 0, - .size = 3 * SZ_128K, - }, { - .name = "bareboxenv", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "bareboxenv2", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "oftree", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 4 * SZ_1M, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, { - .name = "data", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA22, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) { - ek_nand_data.rdy_pin = AT91_PIN_PC13; - ek_nand_data.enable_pin = AT91_PIN_PC14; - } - - /* configure chip-select 3 (NAND) */ - if (machine_is_usb_a9g20()) - sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config); - else - sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* USER PUSH BUTTON */ - .code = KEY_ENTER, - .gpio = AT91_PIN_PB10, - .active_low = 1, - .desc = "user_pb", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */ - at91_set_deglitch(AT91_PIN_PB10, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* user_led (green) */ - .name = "user_led", - .gpio = AT91_PIN_PB21, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("rv3029c2", 0x56), - }, -}; - -static void __init ek_add_device_leds(void) -{ - if (machine_is_usb_a9260() || machine_is_usb_a9g20()) - ek_leds[0].active_low = 0; - - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - ek_add_device_udc(); - /* SPI */ - ek_add_device_spi(); - /* Ethernet */ - ek_add_device_eth(); - /* NAND */ - ek_add_device_nand(); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - ek_add_device_leds(); - - if (machine_is_usb_a9g20()) { - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - } else { - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* shutdown controller, wakeup button (5 msec low) */ - at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) - | AT91_SHDW_WKMODE0_LOW - | AT91_SHDW_RTTWKEN); - } -} - -MACHINE_START(USB_A9263, "CALAO USB_A9263") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9260, "CALAO USB_A9260") - /* Maintainer: calao-systems */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(USB_A9G20, "CALAO USB_A92G0") - /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h new file mode 100644 index 000000000000..d7988b4d8af9 --- /dev/null +++ b/include/dt-bindings/pinctrl/at91.h @@ -0,0 +1,35 @@ +/* + * This header provides constants for most at91 pinctrl bindings. + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_PINCTRL_H__ +#define __DT_BINDINGS_AT91_PINCTRL_H__ + +#define AT91_PINCTRL_NONE (0 << 0) +#define AT91_PINCTRL_PULL_UP (1 << 0) +#define AT91_PINCTRL_MULTI_DRIVE (1 << 1) +#define AT91_PINCTRL_DEGLITCH (1 << 2) +#define AT91_PINCTRL_PULL_DOWN (1 << 3) +#define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_DEBOUNCE (1 << 16) +#define AT91_PINCTRL_DEBOUNCE_VA(x) (x << 17) + +#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) + +#define AT91_PIOA 0 +#define AT91_PIOB 1 +#define AT91_PIOC 2 +#define AT91_PIOD 3 +#define AT91_PIOE 4 + +#define AT91_PERIPH_GPIO 0 +#define AT91_PERIPH_A 1 +#define AT91_PERIPH_B 2 +#define AT91_PERIPH_C 3 +#define AT91_PERIPH_D 4 + +#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */ |
