diff options
60 files changed, 1638 insertions, 630 deletions
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 17453794fca5..18a775d10172 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -96,6 +96,11 @@ EBU Armada family 88F6820 88F6828 + Armada 390/398 Flavors: + 88F6920 + 88F6928 + Product infos: http://www.marvell.com/embedded-processors/armada-39x/ + Armada XP Flavors: MV78230 MV78260 diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt new file mode 100644 index 000000000000..f404a4f9b165 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.txt @@ -0,0 +1,88 @@ +Annapurna Labs Alpine Platform Device Tree Bindings +--------------------------------------------------------------- + +Boards in the Alpine family shall have the following properties: + +* Required root node properties: +compatible: must contain "al,alpine" + +* Example: + +/ { + model = "Annapurna Labs Alpine Dev Board"; + compatible = "al,alpine"; + + ... +} + +* CPU node: + +The Alpine platform includes cortex-a15 cores. +enable-method: must be "al,alpine-smp" to allow smp [1] + +Example: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; +}; + + +* Alpine CPU resume registers + +The CPU resume register are used to define required resume address after +reset. + +Properties: +- compatible : Should contain "al,alpine-cpu-resume". +- reg : Offset and length of the register set for the device + +Example: + +cpu_resume { + compatible = "al,alpine-cpu-resume"; + reg = <0xfbff5ed0 0x30>; +}; + +* Alpine System-Fabric Service Registers + +The System-Fabric Service Registers allow various operation on CPU and +system fabric, like powering CPUs off. + +Properties: +- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". +- reg : Offset and length of the register set for the device + +Example: + +nb_service { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0xfb070000 0x10000>; +}; + +[1] arm/cpu-enable-method/al,alpine-smp diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8fe815046140..973884a1bacf 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -8,3 +8,7 @@ Boards with the Amlogic Meson6 SoC shall have the following properties: Boards with the Amlogic Meson8 SoC shall have the following properties: Required root node property: compatible: "amlogic,meson8"; + +Board compatible values: + - "geniatech,atv1200" + - "minix,neo-x8" diff --git a/Documentation/devicetree/bindings/arm/armada-39x.txt b/Documentation/devicetree/bindings/arm/armada-39x.txt new file mode 100644 index 000000000000..53d4ff9ea8ad --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-39x.txt @@ -0,0 +1,20 @@ +Marvell Armada 39x Platforms Device Tree Bindings +------------------------------------------------- + +Boards with a SoC of the Marvell Armada 39x family shall have the +following property: + +Required root node property: + + - compatible: must contain "marvell,armada390" + +In addition, boards using the Marvell Armada 398 SoC shall have the +following property before the previous one: + +Required root node property: + +compatible: must contain "marvell,armada398" + +Example: + +compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390"; diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp new file mode 100644 index 000000000000..c2e0cc5e4cfd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp @@ -0,0 +1,52 @@ +======================================================== +Secondary CPU enable-method "al,alpine-smp" binding +======================================================== + +This document describes the "al,alpine-smp" method for +enabling secondary CPUs. To apply to all CPUs, a single +"al,alpine-smp" enable method should be defined in the +"cpus" node. + +Enable method name: "al,alpine-smp" +Compatible machines: "al,alpine" +Compatible CPUs: "arm,cortex-a15" +Related properties: (none) + +Note: +This enable method requires valid nodes compatible with +"al,alpine-cpu-resume" and "al,alpine-nb-service"[1]. + +Example: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "al,alpine-smp"; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; +}; + +-- +[1] arm/al,alpine.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 8b9e0a95de31..6aa331d11c5e 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -192,6 +192,7 @@ nodes to be present and contain the properties described below. "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" + "marvell,armada-390-smp" "marvell,armada-xp-smp" "qcom,gcc-msm8660" "qcom,kpss-acc-v1" diff --git a/Documentation/devicetree/bindings/arm/geniatech.txt b/Documentation/devicetree/bindings/arm/geniatech.txt deleted file mode 100644 index 74ccba40b73b..000000000000 --- a/Documentation/devicetree/bindings/arm/geniatech.txt +++ /dev/null @@ -1,5 +0,0 @@ -Geniatech platforms device tree bindings -------------------------------------------- - -Geniatech ATV1200 - - compatible = "geniatech,atv1200" diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt new file mode 100644 index 000000000000..65cc0345747d --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -0,0 +1,59 @@ +Freescale i.MX General Power Controller +======================================= + +The i.MX6Q General Power Control (GPC) block contains DVFS load tracking +counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power +domains. + +Required properties: +- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain GPC interrupt request 1 +- pu-supply: Link to the LDO regulator powering the PU power domain +- clocks: Clock phandles to devices in the PU power domain that need + to be enabled during domain power-up for reset propagation. +- #power-domain-cells: Should be 1, see below: + +The gpc node is a power-controller as documented by the generic power domain +bindings in Documentation/devicetree/bindings/power/power_domain.txt. + +Example: + + gpc: gpc@020dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, + <0 90 IRQ_TYPE_LEVEL_HIGH>; + pu-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + #power-domain-cells = <1>; + }; + + +Specifying power domain for IP modules +====================================== + +IP cores belonging to a power domain should contain a 'power-domains' property +that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying +the power domain the device belongs to. + +Example of a device that is part of the PU power domain: + + vpu: vpu@02040000 { + reg = <0x02040000 0x3c000>; + /* ... */ + power-domains = <&gpc 1>; + /* ... */ + }; + +The following DOMAIN_INDEX values are valid for i.MX6Q: +ARM_DOMAIN 0 +PU_DOMAIN 1 +The following additional DOMAIN_INDEX value is valid for i.MX6SL: +DISPLAY_DOMAIN 2 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index aecec35594ee..54c1d5790358 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -11,6 +11,7 @@ adapteva Adapteva, Inc. adh AD Holdings Plc. adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB +al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. @@ -118,6 +119,7 @@ merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. micron Micron Technology Inc. +minix MINIX Technology Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa diff --git a/MAINTAINERS b/MAINTAINERS index 9988e1a14f50..e85dbd350c0c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -886,6 +886,11 @@ S: Maintained F: drivers/media/rc/meson-ir.c N: meson[x68] +ARM/Annapurna Labs ALPINE ARCHITECTURE +M: Tsahee Zidenberg <tsahee@annapurnalabs.com> +S: Maintained +F: arch/arm/mach-alpine/ + ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES M: Andrew Victor <linux@maxim.org.za> M: Nicolas Ferre <nicolas.ferre@atmel.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c8baa96ed748..d74c9ea6eb06 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -839,6 +839,8 @@ config ARCH_VIRT # source "arch/arm/mach-mvebu/Kconfig" +source "arch/arm/mach-alpine/Kconfig" + source "arch/arm/mach-asm9260/Kconfig" source "arch/arm/mach-at91/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4cfb4b8fc2dd..771d5185a397 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -93,6 +93,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_ALPINE_UART0 + bool "Kernel low-level debugging messages via Alpine UART0" + depends on ARCH_ALPINE + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Alpine based platforms. + config DEBUG_ASM9260_UART bool "Kernel low-level debugging via asm9260 UART" depends on MACH_ASM9260 @@ -1397,6 +1405,7 @@ config DEBUG_UART_PHYS default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1462,6 +1471,7 @@ config DEBUG_UART_VIRT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 + default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X default 0xf31004c0 if DEBUG_MESON_UARTAO @@ -1522,7 +1532,7 @@ config DEBUG_UART_8250_WORD depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || \ + ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index cced41d40ce2..985227cbbd1b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -142,6 +142,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +machine-$(CONFIG_ARCH_ALPINE) += alpine machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 0c3b6783b72a..2a0f895c48d0 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -513,9 +513,27 @@ pinctrl-0 = <&iic3_pins>; status = "okay"; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index a3c27807f6c5..b2dcf640d583 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -517,9 +517,27 @@ status = "okay"; clock-frequency = <100000>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 3c165fc2dce2..5f8a52ac7edf 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -55,22 +55,81 @@ bool mcpm_is_available(void) return (platform_ops) ? true : false; } +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +static inline bool mcpm_cluster_unused(unsigned int cluster) +{ + int i, cnt; + for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++) + cnt |= mcpm_cpu_use_count[cluster][i]; + return !cnt; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { + bool cpu_is_down, cluster_is_down; + int ret = 0; + if (!platform_ops) return -EUNATCH; /* try not to shadow power_up errors */ might_sleep(); - return platform_ops->power_up(cpu, cluster); + + /* backward compatibility callback */ + if (platform_ops->power_up) + return platform_ops->power_up(cpu, cluster); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&mcpm_lock); + + cpu_is_down = !mcpm_cpu_use_count[cluster][cpu]; + cluster_is_down = mcpm_cluster_unused(cluster); + + mcpm_cpu_use_count[cluster][cpu]++; + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 && + mcpm_cpu_use_count[cluster][cpu] != 2); + + if (cluster_is_down) + ret = platform_ops->cluster_powerup(cluster); + if (cpu_is_down && !ret) + ret = platform_ops->cpu_powerup(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_enable(); + return ret; } typedef void (*phys_reset_t)(unsigned long); void mcpm_cpu_power_down(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_going_down, last_man; phys_reset_t phys_reset; - if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down)) - return; + if (WARN_ON_ONCE(!platform_ops)) + return; BUG_ON(!irqs_disabled()); /* @@ -79,28 +138,65 @@ void mcpm_cpu_power_down(void) */ setup_mm_for_reboot(); - platform_ops->power_down(); + /* backward compatibility callback */ + if (platform_ops->power_down) { + platform_ops->power_down(); + goto not_dead; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + + __mcpm_cpu_going_down(cpu, cluster); + arch_spin_lock(&mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + + mcpm_cpu_use_count[cluster][cpu]--; + BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 && + mcpm_cpu_use_count[cluster][cpu] != 1); + cpu_going_down = !mcpm_cpu_use_count[cluster][cpu]; + last_man = mcpm_cluster_unused(cluster); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + platform_ops->cpu_powerdown_prepare(cpu, cluster); + platform_ops->cluster_powerdown_prepare(cluster); + arch_spin_unlock(&mcpm_lock); + platform_ops->cluster_cache_disable(); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + if (cpu_going_down) + platform_ops->cpu_powerdown_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + /* + * If cpu_going_down is false here, that means a power_up + * request raced ahead of us. Even if we do not want to + * shut this CPU down, the caller still expects execution + * to return through the system resume entry path, like + * when the WFI is aborted due to a new IRQ or the like.. + * So let's continue with cache cleaning in all cases. + */ + platform_ops->cpu_cache_disable(); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (cpu_going_down) + wfi(); + +not_dead: /* * It is possible for a power_up request to happen concurrently * with a power_down request for the same CPU. In this case the - * power_down method might not be able to actually enter a - * powered down state with the WFI instruction if the power_up - * method has removed the required reset condition. The - * power_down method is then allowed to return. We must perform - * a re-entry in the kernel as if the power_up method just had - * deasserted reset on the CPU. - * - * To simplify race issues, the platform specific implementation - * must accommodate for the possibility of unordered calls to - * power_down and power_up with a usage count. Therefore, if a - * call to power_up is issued for a CPU that is not down, then - * the next call to power_down must not attempt a full shutdown - * but only do the minimum (normally disabling L1 cache and CPU - * coherency) and return just as if a concurrent power_up request - * had happened as described above. + * CPU might not be able to actually enter a powered down state + * with the WFI instruction if the power_up request has removed + * the required reset condition. We must perform a re-entry in + * the kernel as if the power_up method just had deasserted reset + * on the CPU. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); phys_reset(virt_to_phys(mcpm_entry_point)); @@ -125,26 +221,66 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) void mcpm_cpu_suspend(u64 expected_residency) { - phys_reset_t phys_reset; - - if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend)) + if (WARN_ON_ONCE(!platform_ops)) return; - BUG_ON(!irqs_disabled()); - /* Very similar to mcpm_cpu_power_down() */ - setup_mm_for_reboot(); - platform_ops->suspend(expected_residency); - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset(virt_to_phys(mcpm_entry_point)); - BUG(); + /* backward compatibility callback */ + if (platform_ops->suspend) { + phys_reset_t phys_reset; + BUG_ON(!irqs_disabled()); + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); + } + + /* Some platforms might have to enable special resume modes, etc. */ + if (platform_ops->cpu_suspend_prepare) { + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + arch_spin_lock(&mcpm_lock); + platform_ops->cpu_suspend_prepare(cpu, cluster); + arch_spin_unlock(&mcpm_lock); + } + mcpm_cpu_power_down(); } int mcpm_cpu_powered_up(void) { + unsigned int mpidr, cpu, cluster; + bool cpu_was_down, first_man; + unsigned long flags; + if (!platform_ops) return -EUNATCH; - if (platform_ops->powered_up) + + /* backward compatibility callback */ + if (platform_ops->powered_up) { platform_ops->powered_up(); + return 0; + } + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + local_irq_save(flags); + arch_spin_lock(&mcpm_lock); + + cpu_was_down = !mcpm_cpu_use_count[cluster][cpu]; + first_man = mcpm_cluster_unused(cluster); + + if (first_man && platform_ops->cluster_is_up) + platform_ops->cluster_is_up(cluster); + if (cpu_was_down) + mcpm_cpu_use_count[cluster][cpu] = 1; + if (platform_ops->cpu_is_up) + platform_ops->cpu_is_up(cpu, cluster); + + arch_spin_unlock(&mcpm_lock); + local_irq_restore(flags); + return 0; } @@ -334,8 +470,10 @@ int __init mcpm_sync_init( } mpidr = read_cpuid_mpidr(); this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - for_each_online_cpu(i) + for_each_online_cpu(i) { + mcpm_cpu_use_count[this_cluster][i] = 1; mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + } mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; sync_cache_w(&mcpm_sync); diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 3446f6a1d9fa..50b378f59e08 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -171,12 +171,73 @@ void mcpm_cpu_suspend(u64 expected_residency); int mcpm_cpu_powered_up(void); /* - * Platform specific methods used in the implementation of the above API. + * Platform specific callbacks used in the implementation of the above API. + * + * cpu_powerup: + * Make given CPU runable. Called with MCPM lock held and IRQs disabled. + * The given cluster is assumed to be set up (cluster_powerup would have + * been called beforehand). Must return 0 for success or negative error code. + * + * cluster_powerup: + * Set up power for given cluster. Called with MCPM lock held and IRQs + * disabled. Called before first cpu_powerup when cluster is down. Must + * return 0 for success or negative error code. + * + * cpu_suspend_prepare: + * Special suspend configuration. Called on target CPU with MCPM lock held + * and IRQs disabled. This callback is optional. If provided, it is called + * before cpu_powerdown_prepare. + * + * cpu_powerdown_prepare: + * Configure given CPU for power down. Called on target CPU with MCPM lock + * held and IRQs disabled. Power down must be effective only at the next WFI instruction. + * + * cluster_powerdown_prepare: + * Configure given cluster for power down. Called on one CPU from target + * cluster with MCPM lock held and IRQs disabled. A cpu_powerdown_prepare + * for each CPU in the cluster has happened when this occurs. + * + * cpu_cache_disable: + * Clean and disable CPU level cache for the calling CPU. Called on with IRQs + * disabled only. The CPU is no longer cache coherent with the rest of the + * system when this returns. + * + * cluster_cache_disable: + * Clean and disable the cluster wide cache as well as the CPU level cache + * for the calling CPU. No call to cpu_cache_disable will happen for this + * CPU. Called with IRQs disabled and only when all the other CPUs are done + * with their own cpu_cache_disable. The cluster is no longer cache coherent + * with the rest of the system when this returns. + * + * cpu_is_up: + * Called on given CPU after it has been powered up or resumed. The MCPM lock + * is held and IRQs disabled. This callback is optional. + * + * cluster_is_up: + * Called by the first CPU to be powered up or resumed in given cluster. + * The MCPM lock is held and IRQs disabled. This callback is optional. If + * provided, it is called before cpu_is_up for that CPU. + * + * wait_for_powerdown: + * Wait until given CPU is powered down. This is called in sleeping context. + * Some reasonable timeout must be considered. Must return 0 for success or + * negative error code. */ struct mcpm_platform_ops { + int (*cpu_powerup)(unsigned int cpu, unsigned int cluster); + int (*cluster_powerup)(unsigned int cluster); + void (*cpu_suspend_prepare)(unsigned int cpu, unsigned int cluster); + void (*cpu_powerdown_prepare)(unsigned int cpu, unsigned int cluster); + void (*cluster_powerdown_prepare)(unsigned int cluster); + void (*cpu_cache_disable)(void); + void (*cluster_cache_disable)(void); + void (*cpu_is_up)(unsigned int cpu, unsigned int cluster); + void (*cluster_is_up)(unsigned int cluster); + int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); + + /* deprecated callbacks */ int (*power_up)(unsigned int cpu, unsigned int cluster); void (*power_down)(void); - int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); void (*suspend)(u64); void (*powered_up)(void); }; diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig new file mode 100644 index 000000000000..2c44b930505a --- /dev/null +++ b/arch/arm/mach-alpine/Kconfig @@ -0,0 +1,12 @@ +config ARCH_ALPINE + bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select GENERIC_IRQ_CHIP + select HAVE_ARM_ARCH_TIMER + select HAVE_SMP + select MFD_SYSCON + select PCI + select PCI_HOST_GENERIC + help + This enables support for the Annapurna Labs Alpine V1 boards. diff --git a/arch/arm/mach-alpine/Makefile b/arch/arm/mach-alpine/Makefile new file mode 100644 index 000000000000..b6674890be71 --- /dev/null +++ b/arch/arm/mach-alpine/Makefile @@ -0,0 +1,2 @@ +obj-y += alpine_machine.o +obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c new file mode 100644 index 000000000000..121c77c4b53c --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_pm.c @@ -0,0 +1,70 @@ +/* + * Low-level power-management support for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#include "alpine_cpu_pm.h" +#include "alpine_cpu_resume.h" + +/* NB registers */ +#define AL_SYSFAB_POWER_CONTROL(cpu) (0x2000 + (cpu)*0x100 + 0x20) + +static struct regmap *al_sysfabric; +static struct al_cpu_resume_regs __iomem *al_cpu_resume_regs; +static int wakeup_supported; + +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr) +{ + if (!wakeup_supported) + return -ENOSYS; + + /* + * Set CPU resume address - + * secure firmware running on boot will jump to this address + * after setting proper CPU mode, and initialiing e.g. secure + * regs (the same mode all CPUs are booted to - usually HYP) + */ + writel(phys_resume_addr, + &al_cpu_resume_regs->per_cpu[phys_cpu].resume_addr); + + /* Power-up the CPU */ + regmap_write(al_sysfabric, AL_SYSFAB_POWER_CONTROL(phys_cpu), 0); + + return 0; +} + +void __init alpine_cpu_pm_init(void) +{ + struct device_node *np; + uint32_t watermark; + + al_sysfabric = syscon_regmap_lookup_by_compatible("al,alpine-sysfabric-service"); + + np = of_find_compatible_node(NULL, NULL, "al,alpine-cpu-resume"); + al_cpu_resume_regs = of_iomap(np, 0); + + wakeup_supported = !IS_ERR(al_sysfabric) && al_cpu_resume_regs; + + if (wakeup_supported) { + watermark = readl(&al_cpu_resume_regs->watermark); + wakeup_supported = (watermark & AL_CPU_RESUME_MAGIC_NUM_MASK) + == AL_CPU_RESUME_MAGIC_NUM; + } +} diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.h b/arch/arm/mach-alpine/alpine_cpu_pm.h new file mode 100644 index 000000000000..5179e697c492 --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_pm.h @@ -0,0 +1,26 @@ +/* + * Low-level power-management support for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ALPINE_CPU_PM_H__ +#define __ALPINE_CPU_PM_H__ + +/* Alpine CPU Power Management Services Initialization */ +void alpine_cpu_pm_init(void); + +/* Wake-up a CPU */ +int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr); + +#endif /* __ALPINE_CPU_PM_H__ */ diff --git a/arch/arm/mach-alpine/alpine_cpu_resume.h b/arch/arm/mach-alpine/alpine_cpu_resume.h new file mode 100644 index 000000000000..c80150c0d2d8 --- /dev/null +++ b/arch/arm/mach-alpine/alpine_cpu_resume.h @@ -0,0 +1,38 @@ +/* + * Annapurna labs cpu-resume register structure. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ALPINE_CPU_RESUME_H_ +#define ALPINE_CPU_RESUME_H_ + +/* Per-cpu regs */ +struct al_cpu_resume_regs_per_cpu { + uint32_t flags; + uint32_t resume_addr; +}; + +/* general regs */ +struct al_cpu_resume_regs { + /* Watermark for validating the CPU resume struct */ + uint32_t watermark; + uint32_t flags; + struct al_cpu_resume_regs_per_cpu per_cpu[]; +}; + +/* The expected magic number for validating the resume addresses */ +#define AL_CPU_RESUME_MAGIC_NUM 0xf0e1d200 +#define AL_CPU_RESUME_MAGIC_NUM_MASK 0xffffff00 + +#endif /* ALPINE_CPU_RESUME_H_ */ diff --git a/arch/arm/mach-alpine/alpine_machine.c b/arch/arm/mach-alpine/alpine_machine.c new file mode 100644 index 000000000000..b8e2145e962b --- /dev/null +++ b/arch/arm/mach-alpine/alpine_machine.c @@ -0,0 +1,28 @@ +/* + * Machine declaration for Alpine platforms. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +static const char * const al_match[] __initconst = { + "al,alpine", + NULL, +}; + +DT_MACHINE_START(AL_DT, "Annapurna Labs Alpine") + .dt_compat = al_match, +MACHINE_END diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c new file mode 100644 index 000000000000..f78429f48bd6 --- /dev/null +++ b/arch/arm/mach-alpine/platsmp.c @@ -0,0 +1,49 @@ +/* + * SMP operations for Alpine platform. + * + * Copyright (C) 2015 Annapurna Labs Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> + +#include <asm/smp_plat.h> + +#include "alpine_cpu_pm.h" + +static int alpine_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + phys_addr_t addr; + + addr = virt_to_phys(secondary_startup); + + if (addr > (phys_addr_t)(uint32_t)(-1)) { + pr_err("FAIL: resume address over 32bit (%pa)", &addr); + return -EINVAL; + } + + return alpine_cpu_wakeup(cpu_logical_map(cpu), (uint32_t)addr); +} + +static void __init alpine_smp_prepare_cpus(unsigned int max_cpus) +{ + alpine_cpu_pm_init(); +} + +static struct smp_operations alpine_smp_ops __initdata = { + .smp_prepare_cpus = alpine_smp_prepare_cpus, + .smp_boot_secondary = alpine_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(alpine_smp, "al,alpine-smp", &alpine_smp_ops); diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c index 30dc58be51b8..7ae894c7849b 100644 --- a/arch/arm/mach-bcm/bcm_cygnus.c +++ b/arch/arm/mach-bcm/bcm_cygnus.c @@ -13,7 +13,7 @@ #include <asm/mach/arch.h> -static const char const *bcm_cygnus_dt_compat[] = { +static const char * const bcm_cygnus_dt_compat[] __initconst = { "brcm,cygnus", NULL, }; diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index f70eca7ee705..acd5b560b728 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -126,6 +126,12 @@ enum { void exynos_firmware_init(void); +/* CPU BOOT mode flag for Exynos3250 SoC bootloader */ +#define C2_STATE (1 << 3) + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode); +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode); + extern u32 exynos_get_eint_wake_mask(void); #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 8576a9f734bd..bcde0dd668df 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -214,6 +214,7 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && of_machine_is_compatible("samsung,trats2")) || + of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 4791a3cc00f9..1bd35763f12e 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -48,7 +48,13 @@ static int exynos_do_idle(unsigned long mode) __raw_writel(virt_to_phys(exynos_cpu_resume_ns), sysram_ns_base_addr + 0x24); __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); - exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); + if (soc_is_exynos3250()) { + exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, + SMC_POWERSTATE_IDLE, 0); + exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER, + SMC_POWERSTATE_IDLE, 0); + } else + exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); break; case FW_DO_IDLE_SLEEP: exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); @@ -206,3 +212,28 @@ void __init exynos_firmware_init(void) outer_cache.configure = exynos_l2_configure; } } + +#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28) +#define BOOT_MODE_MASK 0x1f + +void exynos_set_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + + if (mode & BOOT_MODE_MASK) + tmp &= ~BOOT_MODE_MASK; + + tmp |= mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} + +void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode) +{ + unsigned int tmp; + + tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + tmp &= ~mode; + __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); +} diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b0d3c2e876fb..9bdf54795f05 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -61,25 +61,7 @@ static void __iomem *ns_sram_base_addr; : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ "r9", "r10", "lr", "memory") -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() after its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; -static int -cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; - -#define exynos_cluster_usecnt(cluster) \ - (cpu_use_count[0][cluster] + \ - cpu_use_count[1][cluster] + \ - cpu_use_count[2][cluster] + \ - cpu_use_count[3][cluster]) - -#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) - -static int exynos_power_up(unsigned int cpu, unsigned int cluster) +static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) { unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); @@ -88,127 +70,65 @@ static int exynos_power_up(unsigned int cpu, unsigned int cluster) cluster >= EXYNOS5420_NR_CLUSTERS) return -EINVAL; - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&exynos_mcpm_lock); - - cpu_use_count[cpu][cluster]++; - if (cpu_use_count[cpu][cluster] == 1) { - bool was_cluster_down = - (exynos_cluster_usecnt(cluster) == 1); - - /* - * Turn on the cluster (L2/COMMON) and then power on the - * cores. - */ - if (was_cluster_down) - exynos_cluster_power_up(cluster); - - exynos_cpu_power_up(cpunr); - } else if (cpu_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } + exynos_cpu_power_up(cpunr); + return 0; +} - arch_spin_unlock(&exynos_mcpm_lock); - local_irq_enable(); +static int exynos_cluster_powerup(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + exynos_cluster_power_up(cluster); return 0; } -/* - * NOTE: This function requires the stack data to be visible through power down - * and can only be executed on processors like A15 and A7 that hit the cache - * with the C bit clear in the SCTLR register. - */ -static void exynos_power_down(void) +static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - bool last_man = false, skip_wfi = false; - unsigned int cpunr; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cpu_power_down(cpunr); +} - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&exynos_mcpm_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - cpu_use_count[cpu][cluster]--; - if (cpu_use_count[cpu][cluster] == 0) { - exynos_cpu_power_down(cpunr); - - if (exynos_cluster_unused(cluster)) { - exynos_cluster_power_down(cluster); - last_man = true; - } - } else if (cpu_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else { - BUG(); - } - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&exynos_mcpm_lock); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* - * On the Cortex-A15 we need to disable - * L2 prefetching before flushing the cache. - */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } +static void exynos_cluster_powerdown_prepare(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS); + exynos_cluster_power_down(cluster); +} - /* Flush all cache levels for this cluster. */ - exynos_v7_exit_coherency_flush(all); +static void exynos_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); +} +static void exynos_cluster_cache_disable(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. */ - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - arch_spin_unlock(&exynos_mcpm_lock); - - /* Disable and flush the local CPU cache. */ - exynos_v7_exit_coherency_flush(louis); + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); } - __mcpm_cpu_down(cpu, cluster); - - /* Now we are prepared for power-down, do it: */ - if (!skip_wfi) - wfi(); + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); - /* Not dead at this point? Let our caller cope. */ + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); } static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) @@ -222,10 +142,8 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) /* Wait for the core state to be OFF */ while (tries--) { - if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { - if ((exynos_cpu_power_state(cpunr) == 0)) - return 0; /* success: the CPU is halted */ - } + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ /* Otherwise, wait and retry: */ msleep(1); @@ -234,63 +152,23 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) return -ETIMEDOUT; /* timeout */ } -static void exynos_powered_up(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - arch_spin_lock(&exynos_mcpm_lock); - if (cpu_use_count[cpu][cluster] == 0) - cpu_use_count[cpu][cluster] = 1; - arch_spin_unlock(&exynos_mcpm_lock); -} - -static void exynos_suspend(u64 residency) +static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpunr; - - exynos_power_down(); - - /* - * Execution reaches here only if cpu did not power down. - * Hence roll back the changes done in exynos_power_down function. - * - * CAUTION: "This function requires the stack data to be visible through - * power down and can only be executed on processors like A15 and A7 - * that hit the cache with the C bit clear in the SCTLR register." - */ - mpidr = read_cpuid_mpidr(); - cpunr = exynos_pmu_cpunr(mpidr); - - exynos_cpu_power_up(cpunr); + /* especially when resuming: make sure power control is set */ + exynos_cpu_powerup(cpu, cluster); } static const struct mcpm_platform_ops exynos_power_ops = { - .power_up = exynos_power_up, - .power_down = exynos_power_down, + .cpu_powerup = exynos_cpu_powerup, + .cluster_powerup = exynos_cluster_powerup, + .cpu_powerdown_prepare = exynos_cpu_powerdown_prepare, + .cluster_powerdown_prepare = exynos_cluster_powerdown_prepare, + .cpu_cache_disable = exynos_cpu_cache_disable, + .cluster_cache_disable = exynos_cluster_cache_disable, .wait_for_powerdown = exynos_wait_for_powerdown, - .suspend = exynos_suspend, - .powered_up = exynos_powered_up, + .cpu_is_up = exynos_cpu_is_up, }; -static void __init exynos_mcpm_usage_count_init(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || - cluster >= EXYNOS5420_NR_CLUSTERS); - - cpu_use_count[cpu][cluster] = 1; -} - /* * Enable cluster-level coherency, in preparation for turning on the MMU. */ @@ -302,19 +180,6 @@ static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) "b cci_enable_port_for_self"); } -static void __init exynos_cache_off(void) -{ - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* disable L2 prefetching on the Cortex-A15 */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3\n\t" - "isb\n\t" - "dsb" - : : "r" (0x400)); - } - exynos_v7_exit_coherency_flush(all); -} - static const struct of_device_id exynos_dt_mcpm_match[] = { { .compatible = "samsung,exynos5420" }, { .compatible = "samsung,exynos5800" }, @@ -370,13 +235,11 @@ static int __init exynos_mcpm_init(void) */ pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); - exynos_mcpm_usage_count_init(); - ret = mcpm_platform_register(&exynos_power_ops); if (!ret) ret = mcpm_sync_init(exynos_pm_power_up_setup); if (!ret) - ret = mcpm_loopback(exynos_cache_off); /* turn on the CCI */ + ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */ if (ret) { iounmap(ns_sram_base_addr); return ret; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index d2e9f12d12f1..ebd135bb0995 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -126,6 +126,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { + u32 core_conf; + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for @@ -137,7 +139,10 @@ void exynos_cpu_power_down(int cpu) if (!(val & S5P_CORE_LOCAL_PWR_EN)) return; } - pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + + core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu)); + core_conf &= ~S5P_CORE_LOCAL_PWR_EN; + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } /** @@ -148,7 +153,12 @@ void exynos_cpu_power_down(int cpu) */ void exynos_cpu_power_up(int cpu) { - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + u32 core_conf = S5P_CORE_LOCAL_PWR_EN; + + if (soc_is_exynos3250()) + core_conf |= S5P_CORE_AUTOWAKEUP_EN; + + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); } @@ -226,6 +236,10 @@ static void exynos_core_restart(u32 core_id) if (!of_machine_is_compatible("samsung,exynos3250")) return; + while (!pmu_raw_readl(S5P_PMU_SPARE2)) + udelay(10); + udelay(10); + val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG; pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id)); @@ -346,7 +360,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) call_firmware_op(cpu_boot, core_id); - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + if (soc_is_exynos3250()) + dsb_sev(); + else + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); if (pen_release == -1) break; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 5685250693fd..cc75ab448be3 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -127,6 +127,8 @@ int exynos_pm_central_resume(void) static void exynos_set_wakeupmask(long mask) { pmu_raw_writel(mask, S5P_WAKEUP_MASK); + if (soc_is_exynos3250()) + pmu_raw_writel(0x0, S5P_WAKEUP_MASK2); } static void exynos_cpu_set_boot_vector(long flags) @@ -140,7 +142,7 @@ static int exynos_aftr_finisher(unsigned long flags) { int ret; - exynos_set_wakeupmask(0x0000ff3e); + exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e); /* Set value of power down register for aftr mode */ exynos_sys_powerdown_conf(SYS_AFTR); @@ -157,8 +159,13 @@ static int exynos_aftr_finisher(unsigned long flags) void exynos_enter_aftr(void) { + unsigned int cpuid = smp_processor_id(); + cpu_pm_enter(); + if (soc_is_exynos3250()) + exynos_set_boot_flag(cpuid, C2_STATE); + exynos_pm_central_suspend(); if (of_machine_is_compatible("samsung,exynos4212") || @@ -178,6 +185,9 @@ void exynos_enter_aftr(void) exynos_pm_central_resume(); + if (soc_is_exynos3250()) + exynos_clear_boot_flag(cpuid, C2_STATE); + cpu_pm_exit(); } diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 37266a826437..cbe56b35aea0 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -37,6 +37,7 @@ struct exynos_pm_domain { struct clk *oscclk; struct clk *clk[MAX_CLK_PER_DOMAIN]; struct clk *pclk[MAX_CLK_PER_DOMAIN]; + struct clk *asb_clk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -45,14 +46,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) void __iomem *base; u32 timeout, pwr; char *op; + int i; pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_prepare_enable(pd->asb_clk[i]); + } + /* Set oscclk before powering off a domain*/ if (!power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -81,8 +87,6 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) /* Restore clocks after powering on a domain*/ if (power_on) { - int i; - for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; @@ -92,6 +96,12 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->asb_clk[i])) + break; + clk_disable_unprepare(pd->asb_clk[i]); + } + return 0; } @@ -125,12 +135,21 @@ static __init int exynos4_pm_init_power_domain(void) return -ENOMEM; } - pd->pd.name = kstrdup(np->name, GFP_KERNEL); + pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL); pd->name = pd->pd.name; pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "asb%d", i); + pd->asb_clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->asb_clk[i])) + break; + } + pd->oscclk = clk_get(dev, "oscclk"); if (IS_ERR(pd->oscclk)) goto no_clk; diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index eb461e1c325a..b7614333d296 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -43,12 +43,14 @@ #define S5P_WAKEUP_STAT 0x0600 #define S5P_EINT_WAKEUP_MASK 0x0604 #define S5P_WAKEUP_MASK 0x0608 +#define S5P_WAKEUP_MASK2 0x0614 #define S5P_INFORM0 0x0800 #define S5P_INFORM1 0x0804 #define S5P_INFORM5 0x0814 #define S5P_INFORM6 0x0818 #define S5P_INFORM7 0x081C +#define S5P_PMU_SPARE2 0x0908 #define S5P_PMU_SPARE3 0x090C #define EXYNOS_IROM_DATA2 0x0988 @@ -182,6 +184,7 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) +#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index f7b82f9c1e21..c2845717bc8f 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -17,6 +17,8 @@ #define SMC_CMD_SLEEP (-3) #define SMC_CMD_CPU1BOOT (-4) #define SMC_CMD_CPU0AFTR (-5) +#define SMC_CMD_SAVE (-6) +#define SMC_CMD_SHUTDOWN (-7) /* For CP15 Access */ #define SMC_CMD_C15RESUME (-11) /* For L2 Cache Access */ @@ -32,4 +34,11 @@ extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); #endif /* __ASSEMBLY__ */ +/* op type for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define OP_TYPE_CORE 0x0 +#define OP_TYPE_CLUSTER 0x1 + +/* Power State required for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */ +#define SMC_POWERSTATE_IDLE 0x1 + #endif diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 2146d918aedd..3e6aea7f83af 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -65,8 +65,6 @@ static struct sleep_save exynos_core_save[] = { struct exynos_pm_data { const struct exynos_wkup_irq *wkup_irq; - struct sleep_save *extra_save; - int num_extra_save; unsigned int wake_disable_mask; unsigned int *release_ret_regs; @@ -77,7 +75,7 @@ struct exynos_pm_data { int (*cpu_suspend)(unsigned long); }; -struct exynos_pm_data *pm_data; +static const struct exynos_pm_data *pm_data; static int exynos5420_cpu_state; static unsigned int exynos_pmu_spare3; @@ -106,7 +104,7 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { { /* sentinel */ }, }; -unsigned int exynos_release_ret_regs[] = { +static unsigned int exynos_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -117,7 +115,7 @@ unsigned int exynos_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos3250_release_ret_regs[] = { +static unsigned int exynos3250_release_ret_regs[] = { S5P_PAD_RET_MAUDIO_OPTION, S5P_PAD_RET_GPIO_OPTION, S5P_PAD_RET_UART_OPTION, @@ -130,7 +128,7 @@ unsigned int exynos3250_release_ret_regs[] = { REG_TABLE_END, }; -unsigned int exynos5420_release_ret_regs[] = { +static unsigned int exynos5420_release_ret_regs[] = { EXYNOS_PAD_RET_DRAM_OPTION, EXYNOS_PAD_RET_MAUDIO_OPTION, EXYNOS_PAD_RET_JTAG_OPTION, @@ -349,10 +347,6 @@ static void exynos_pm_prepare(void) s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (pm_data->extra_save) - s3c_pm_do_save(pm_data->extra_save, - pm_data->num_extra_save); - exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ @@ -475,10 +469,6 @@ static void exynos_pm_resume(void) /* For release retention */ exynos_pm_release_retention(); - if (pm_data->extra_save) - s3c_pm_do_restore_core(pm_data->extra_save, - pm_data->num_extra_save); - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); if (cpuid == ARM_CPU_PART_CORTEX_A9) @@ -685,7 +675,7 @@ static const struct exynos_pm_data exynos5250_pm_data = { .cpu_suspend = exynos_cpu_suspend, }; -static struct exynos_pm_data exynos5420_pm_data = { +static const struct exynos_pm_data exynos5420_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = (0x7F << 7) | (0x1F << 1), .release_ret_regs = exynos5420_release_ret_regs, @@ -736,7 +726,7 @@ void __init exynos_pm_init(void) if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); - pm_data = (struct exynos_pm_data *) match->data; + pm_data = (const struct exynos_pm_data *) match->data; /* All wakeup disable */ tmp = pmu_raw_readl(S5P_WAKEUP_MASK); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0748747b2bc6..3a3d3e9d7bfd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -21,6 +21,7 @@ config MXC_AVIC config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" + depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS help The debug board is an integral part of the MXC 3-stack(PDK) platforms, it can be attached or removed from the peripheral @@ -50,6 +51,7 @@ config HAVE_IMX_ANATOP config HAVE_IMX_GPC bool + select PM_GENERIC_DOMAINS if PM config HAVE_IMX_MMDC bool @@ -586,6 +588,7 @@ config SOC_VF610 select ARM_GIC select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 + select SMP_ON_UP if SMP help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index d04a430607b8..469a150bf98f 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -119,6 +119,7 @@ static unsigned int share_count_asrc; static unsigned int share_count_ssi1; static unsigned int share_count_ssi2; static unsigned int share_count_ssi3; +static unsigned int share_count_mipi_core_cfg; static void __init imx6q_clocks_init(struct device_node *ccm_node) { @@ -246,6 +247,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20); if (cpu_is_imx6dl()) { clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); @@ -400,7 +402,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); - clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); + clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4); clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); @@ -415,7 +417,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); - clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); + clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg); + clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg); if (cpu_is_imx6dl()) /* * The multiplexer and divider of the imx6q clock gpu2d get diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 745caa18ab2c..029f59ce2712 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -10,15 +10,25 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/clk.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/regulator/consumer.h> #include <linux/irqchip/arm-gic.h> #include "common.h" +#include "hardware.h" +#define GPC_CNTR 0x000 #define GPC_IMR1 0x008 +#define GPC_PGC_GPU_PDN 0x260 +#define GPC_PGC_GPU_PUPSCR 0x264 +#define GPC_PGC_GPU_PDNSCR 0x268 #define GPC_PGC_CPU_PDN 0x2a0 #define GPC_PGC_CPU_PUPSCR 0x2a4 #define GPC_PGC_CPU_PDNSCR 0x2a8 @@ -27,6 +37,18 @@ #define IMR_NUM 4 +#define GPU_VPU_PUP_REQ BIT(1) +#define GPU_VPU_PDN_REQ BIT(0) + +#define GPC_CLK_MAX 6 + +struct pu_domain { + struct generic_pm_domain base; + struct regulator *reg; + struct clk *clk[GPC_CLK_MAX]; + int num_clks; +}; + static void __iomem *gpc_base; static u32 gpc_wake_irqs[IMR_NUM]; static u32 gpc_saved_imrs[IMR_NUM]; @@ -170,3 +192,194 @@ void __init imx_gpc_init(void) gic_arch_extn.irq_unmask = imx_gpc_irq_unmask; gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake; } + +#ifdef CONFIG_PM_GENERIC_DOMAINS + +static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) +{ + int iso, iso2sw; + u32 val; + + /* Read ISO and ISO2SW power down delays */ + val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR); + iso = val & 0x3f; + iso2sw = (val >> 8) & 0x3f; + + /* Gate off PU domain when GPU/VPU when powered down */ + writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN); + + /* Request GPC to power down GPU/VPU */ + val = readl_relaxed(gpc_base + GPC_CNTR); + val |= GPU_VPU_PDN_REQ; + writel_relaxed(val, gpc_base + GPC_CNTR); + + /* Wait ISO + ISO2SW IPG clock cycles */ + ndelay((iso + iso2sw) * 1000 / 66); +} + +static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) +{ + struct pu_domain *pu = container_of(genpd, struct pu_domain, base); + + _imx6q_pm_pu_power_off(genpd); + + if (pu->reg) + regulator_disable(pu->reg); + + return 0; +} + +static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd) +{ + struct pu_domain *pu = container_of(genpd, struct pu_domain, base); + int i, ret, sw, sw2iso; + u32 val; + + if (pu->reg) + ret = regulator_enable(pu->reg); + if (pu->reg && ret) { + pr_err("%s: failed to enable regulator: %d\n", __func__, ret); + return ret; + } + + /* Enable reset clocks for all devices in the PU domain */ + for (i = 0; i < pu->num_clks; i++) + clk_prepare_enable(pu->clk[i]); + + /* Gate off PU domain when GPU/VPU when powered down */ + writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN); + + /* Read ISO and ISO2SW power down delays */ + val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR); + sw = val & 0x3f; + sw2iso = (val >> 8) & 0x3f; + + /* Request GPC to power up GPU/VPU */ + val = readl_relaxed(gpc_base + GPC_CNTR); + val |= GPU_VPU_PUP_REQ; + writel_relaxed(val, gpc_base + GPC_CNTR); + + /* Wait ISO + ISO2SW IPG clock cycles */ + ndelay((sw + sw2iso) * 1000 / 66); + + /* Disable reset clocks for all devices in the PU domain */ + for (i = 0; i < pu->num_clks; i++) + clk_disable_unprepare(pu->clk[i]); + + return 0; +} + +static struct generic_pm_domain imx6q_arm_domain = { + .name = "ARM", +}; + +static struct pu_domain imx6q_pu_domain = { + .base = { + .name = "PU", + .power_off = imx6q_pm_pu_power_off, + .power_on = imx6q_pm_pu_power_on, + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, + }, +}; + +static struct generic_pm_domain imx6sl_display_domain = { + .name = "DISPLAY", +}; + +static struct generic_pm_domain *imx_gpc_domains[] = { + &imx6q_arm_domain, + &imx6q_pu_domain.base, + &imx6sl_display_domain, +}; + +static struct genpd_onecell_data imx_gpc_onecell_data = { + .domains = imx_gpc_domains, + .num_domains = ARRAY_SIZE(imx_gpc_domains), +}; + +static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) +{ + struct clk *clk; + bool is_off; + int i; + + imx6q_pu_domain.reg = pu_reg; + + for (i = 0; ; i++) { + clk = of_clk_get(dev->of_node, i); + if (IS_ERR(clk)) + break; + if (i >= GPC_CLK_MAX) { + dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX); + goto clk_err; + } + imx6q_pu_domain.clk[i] = clk; + } + imx6q_pu_domain.num_clks = i; + + is_off = IS_ENABLED(CONFIG_PM); + if (is_off) { + _imx6q_pm_pu_power_off(&imx6q_pu_domain.base); + } else { + /* + * Enable power if compiled without CONFIG_PM in case the + * bootloader disabled it. + */ + imx6q_pm_pu_power_on(&imx6q_pu_domain.base); + } + + pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off); + return of_genpd_add_provider_onecell(dev->of_node, + &imx_gpc_onecell_data); + +clk_err: + while (i--) + clk_put(imx6q_pu_domain.clk[i]); + return -EINVAL; +} + +#else +static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg) +{ + return 0; +} +#endif /* CONFIG_PM_GENERIC_DOMAINS */ + +static int imx_gpc_probe(struct platform_device *pdev) +{ + struct regulator *pu_reg; + int ret; + + pu_reg = devm_regulator_get_optional(&pdev->dev, "pu"); + if (PTR_ERR(pu_reg) == -ENODEV) + pu_reg = NULL; + if (IS_ERR(pu_reg)) { + ret = PTR_ERR(pu_reg); + dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret); + return ret; + } + + return imx_gpc_genpd_init(&pdev->dev, pu_reg); +} + +static const struct of_device_id imx_gpc_dt_ids[] = { + { .compatible = "fsl,imx6q-gpc" }, + { .compatible = "fsl,imx6sl-gpc" }, + { } +}; + +static struct platform_driver imx_gpc_driver = { + .driver = { + .name = "imx-gpc", + .owner = THIS_MODULE, + .of_match_table = imx_gpc_dt_ids, + }, + .probe = imx_gpc_probe, +}; + +static int __init imx_pgc_init(void) +{ + return platform_driver_register(&imx_gpc_driver); +} +subsys_initcall(imx_pgc_init); diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 18301dc9d2e7..0743e2059645 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,8 +1,11 @@ menuconfig ARCH_MESON bool "Amlogic Meson SoCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select ARM_GIC select CACHE_L2X0 + select PINCTRL + select PINCTRL_MESON if ARCH_MESON diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c1e4567a5ab3..97473168d6b6 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -64,6 +64,20 @@ config MACH_ARMADA_38X Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 380/385 SoC with device tree. +config MACH_ARMADA_39X + bool "Marvell Armada 39x boards" if ARCH_MULTI_V7 + select ARM_GIC + select ARMADA_39X_CLK + select CACHE_L2X0 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_39X + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 39x SoC with device tree. + config MACH_ARMADA_XP bool "Marvell Armada XP boards" if ARCH_MULTI_V7 select ARMADA_XP_CLK diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 31b66f26e029..afee9083ad92 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -232,3 +232,17 @@ DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, MACHINE_END + +static const char * const armada_39x_dt_compat[] __initconst = { + "marvell,armada390", + "marvell,armada398", + NULL, +}; + +DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_39x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c index 2ec1a42b4321..df0a9cc5da59 100644 --- a/arch/arm/mach-mvebu/platsmp-a9.c +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -110,3 +110,5 @@ CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", &mvebu_cortex_a9_smp_ops); CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", &armada_38x_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp", + &armada_38x_smp_ops); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index be9541e18650..166b18f515a2 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -690,6 +690,9 @@ struct dev_pm_domain omap_device_pm_domain = { USE_PLATFORM_PM_SLEEP_OPS .suspend_noirq = _od_suspend_noirq, .resume_noirq = _od_resume_noirq, + .freeze_noirq = _od_suspend_noirq, + .thaw_noirq = _od_resume_noirq, + .restore_noirq = _od_resume_noirq, } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 8eb85925e444..e2223148ba4d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -20,6 +20,7 @@ #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" #include "omap_hwmod_common_data.h" +#include "hdq1w.h" /* IP blocks */ @@ -516,6 +517,33 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = { .parent_hwmod = &am43xx_dss_core_hwmod, }; +/* HDQ1W */ +static struct omap_hwmod_class_sysconfig am43xx_hdq1w_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0014, + .syss_offs = 0x0018, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am43xx_hdq1w_hwmod_class = { + .name = "hdq1w", + .sysc = &am43xx_hdq1w_sysc, + .reset = &omap_hdq1w_reset, +}; + +static struct omap_hwmod am43xx_hdq1w_hwmod = { + .name = "hdq1w", + .class = &am43xx_hdq1w_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -790,6 +818,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_hdq1w_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -889,6 +924,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss, &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, + &am43xx_l4_ls__hdq1w, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 16fe7a1b7a35..0e64c2fac0b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1726,21 +1726,6 @@ static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = { .sysc = &dra7xx_timer_1ms_sysc, }; -static struct omap_hwmod_class_sysconfig dra7xx_timer_secure_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_timer_secure_hwmod_class = { - .name = "timer", - .sysc = &dra7xx_timer_secure_sysc, -}; - static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, @@ -1804,7 +1789,7 @@ static struct omap_hwmod dra7xx_timer3_hwmod = { /* timer4 */ static struct omap_hwmod dra7xx_timer4_hwmod = { .name = "timer4", - .class = &dra7xx_timer_secure_hwmod_class, + .class = &dra7xx_timer_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "timer4_gfclk_mux", .prcm = { @@ -1921,6 +1906,66 @@ static struct omap_hwmod dra7xx_timer11_hwmod = { }, }; +/* timer13 */ +static struct omap_hwmod dra7xx_timer13_hwmod = { + .name = "timer13", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer13_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer14 */ +static struct omap_hwmod dra7xx_timer14_hwmod = { + .name = "timer14", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer14_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer15 */ +static struct omap_hwmod dra7xx_timer15_hwmod = { + .name = "timer15", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer15_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* timer16 */ +static struct omap_hwmod dra7xx_timer16_hwmod = { + .name = "timer16", + .class = &dra7xx_timer_hwmod_class, + .clkdm_name = "l4per3_clkdm", + .main_clk = "timer16_gfclk_mux", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* * 'uart' class * @@ -3059,6 +3104,38 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per3 -> timer13 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer13_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer14 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer14 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer14_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer15 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer15 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer15_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> timer16 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_timer16_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per1 -> uart1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = { .master = &dra7xx_l4_per1_hwmod, @@ -3295,6 +3372,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__timer9, &dra7xx_l4_per1__timer10, &dra7xx_l4_per1__timer11, + &dra7xx_l4_per3__timer13, + &dra7xx_l4_per3__timer14, + &dra7xx_l4_per3__timer15, + &dra7xx_l4_per3__timer16, &dra7xx_l4_per1__uart1, &dra7xx_l4_per1__uart2, &dra7xx_l4_per1__uart3, diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index ad7b3e9977f8..48df3b55057e 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -143,5 +143,6 @@ #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268 #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 #define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20 +#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 #endif diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index f26fcdca2445..5b4ca3c3c879 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -55,7 +55,7 @@ static int pmu_power_domain_is_on(int pd) return !(val & BIT(pd)); } -struct reset_control *rockchip_get_core_reset(int cpu) +static struct reset_control *rockchip_get_core_reset(int cpu) { struct device *dev = get_cpu_device(cpu); struct device_node *np; @@ -201,7 +201,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) return 0; } -static struct regmap_config rockchip_pmu_regmap_config = { +static const struct regmap_config rockchip_pmu_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 50cb781aaa36..b07d88602073 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -75,9 +75,13 @@ static void rk3288_slp_mode_set(int level) regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); - /* set bit 8 so that system will resume to FAST_BOOT_ADDR */ + /* + * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR + * PCLK_WDT_GATE - disable WDT during suspend. + */ regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, - SGRF_FAST_BOOT_EN | SGRF_FAST_BOOT_EN_WRITE); + SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN + | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); /* booting address of resuming system is from this register value */ regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, @@ -122,7 +126,8 @@ static void rk3288_slp_mode_set_resume(void) rk3288_pmu_pwr_mode_con); regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, - rk3288_sgrf_soc_con0 | SGRF_FAST_BOOT_EN_WRITE); + rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE + | SGRF_FAST_BOOT_EN_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) @@ -209,6 +214,9 @@ static int rk3288_suspend_init(struct device_node *np) memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, rk3288_bootram_sz); + regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH); + regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH); + return 0; } diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index 7c889c04604b..03ff31d8282d 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -50,6 +50,8 @@ static inline void rockchip_suspend_init(void) #define RK3288_SGRF_SOC_CON0 (0x0000) #define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) +#define SGRF_PCLK_WDT_GATE BIT(6) +#define SGRF_PCLK_WDT_GATE_WRITE BIT(22) #define SGRF_FAST_BOOT_EN BIT(8) #define SGRF_FAST_BOOT_EN_WRITE BIT(24) @@ -63,6 +65,10 @@ static inline void rockchip_suspend_init(void) /* PMU_WAKEUP_CFG1 bits */ #define PMU_ARMINT_WAKEUP_EN BIT(0) +/* wait 30ms for OSC stable and 30ms for pmic stable */ +#define OSC_STABL_CNT_THRESH (32 * 30) +#define PMU_STABL_CNT_THRESH (32 * 30) + enum rk3288_pwr_mode_con { PMU_PWR_MODE_EN = 0, PMU_CLK_CORE_SRC_GATE_EN, diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h index 7bc66682687e..dcbe17f5e5f8 100644 --- a/arch/arm/mach-s3c64xx/crag6410.h +++ b/arch/arm/mach-s3c64xx/crag6410.h @@ -14,6 +14,7 @@ #include <mach/gpio-samsung.h> #define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START +#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) #define PCA935X_GPIO_BASE GPIO_BOARD_START #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 10b913baab28..65c426bc45f7 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -554,6 +554,7 @@ static struct wm831x_touch_pdata touch_pdata = { static struct wm831x_pdata crag_pmic_pdata = { .wm831x_num = 1, + .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = BANFF_PMIC_GPIO_BASE, .soft_shutdown = true, diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 2f36c85eec4b..347b6a58fc3e 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -69,10 +69,12 @@ config ARCH_R8A7779 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" select ARCH_RCAR_GEN2 + select I2C config ARCH_R8A7791 bool "R-Car M2-W (R8A77910)" select ARCH_RCAR_GEN2 + select I2C config ARCH_R8A7794 bool "R-Car E2 (R8A77940)" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 03794b0de64b..3631d8b6fc5e 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -35,6 +35,8 @@ cpu-y := platsmp.o headsmp.o # Shared SoC family objects obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) CFLAGS_setup-rcar-gen2.o += -march=armv7-a +obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o # SMP objects smp-y := $(cpu-y) diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c new file mode 100644 index 000000000000..384e6e934b87 --- /dev/null +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -0,0 +1,147 @@ +/* + * R-Car Generation 2 da9063/da9210 regulator quirk + * + * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and + * da9210 regulators. Both regulators have their interrupt request lines tied + * to the same interrupt pin (IRQ2) on the SoC. + * + * After cold boot or da9063-induced restart, both the da9063 and da9210 seem + * to assert their interrupt request lines. Hence as soon as one driver + * requests this irq, it gets stuck in an interrupt storm, as it only manages + * to deassert its own interrupt request line, and the other driver hasn't + * installed an interrupt handler yet. + * + * To handle this, install a quirk that masks the interrupts in both the + * da9063 and da9210. This quirk has to run after the i2c master driver has + * been initialized, but before the i2c slave drivers are initialized. + * + * Copyright (C) 2015 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/mfd/da9063/registers.h> + + +#define IRQC_BASE 0xe61c0000 +#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */ + +#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ + +static void __iomem *irqc; + +static const u8 da9063_mask_regs[] = { + DA9063_REG_IRQ_MASK_A, + DA9063_REG_IRQ_MASK_B, + DA9063_REG_IRQ_MASK_C, + DA9063_REG_IRQ_MASK_D, +}; + +/* DA9210 System Control and Event Registers */ +#define DA9210_REG_MASK_A 0x54 +#define DA9210_REG_MASK_B 0x55 + +static const u8 da9210_mask_regs[] = { + DA9210_REG_MASK_A, + DA9210_REG_MASK_B, +}; + +static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], + unsigned int nregs) +{ + unsigned int i; + + dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); + + for (i = 0; i < nregs; i++) { + int error = i2c_smbus_write_byte_data(client, regs[i], ~0); + if (error) { + dev_err(&client->dev, "i2c error %d\n", error); + return; + } + } +} + +static int regulator_quirk_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct i2c_client *client; + u32 mon; + + mon = ioread32(irqc + IRQC_MONITOR); + dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); + if (mon & REGULATOR_IRQ_MASK) + goto remove; + + if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type) + return 0; + + client = to_i2c_client(dev); + dev_dbg(dev, "Detected %s\n", client->name); + + if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) + da9xxx_mask_irqs(client, da9063_mask_regs, + ARRAY_SIZE(da9063_mask_regs)); + else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) + da9xxx_mask_irqs(client, da9210_mask_regs, + ARRAY_SIZE(da9210_mask_regs)); + + mon = ioread32(irqc + IRQC_MONITOR); + if (mon & REGULATOR_IRQ_MASK) + goto remove; + + return 0; + +remove: + dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); + + bus_unregister_notifier(&i2c_bus_type, nb); + iounmap(irqc); + return 0; +} + +static struct notifier_block regulator_quirk_nb = { + .notifier_call = regulator_quirk_notify +}; + +static int __init rcar_gen2_regulator_quirk(void) +{ + u32 mon; + + if (!of_machine_is_compatible("renesas,koelsch") && + !of_machine_is_compatible("renesas,lager")) + return -ENODEV; + + irqc = ioremap(IRQC_BASE, PAGE_SIZE); + if (!irqc) + return -ENOMEM; + + mon = ioread32(irqc + IRQC_MONITOR); + if (mon & REGULATOR_IRQ_MASK) { + pr_debug("%s: IRQ2 is not asserted, not installing quirk\n", + __func__); + iounmap(irqc); + return 0; + } + + pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); + + bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); + return 0; +} + +arch_initcall(rcar_gen2_regulator_quirk); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 51464cc6d65b..5d13595aa027 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -21,6 +21,7 @@ #include <linux/dma-contiguous.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/of.h> #include <linux/of_fdt.h> #include <asm/mach/arch.h> @@ -195,7 +196,7 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); #endif diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 30b993399ed7..5cedcf572104 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> -#include <linux/spinlock.h> #include <linux/errno.h> #include <linux/of_address.h> #include <linux/vexpress.h> @@ -36,163 +35,102 @@ #define KFC_CFG_W 0x2c #define DCS_CFG_R 0x30 -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() while its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED; - static void __iomem *dcscb_base; -static int dcscb_use_count[4][2]; static int dcscb_allcpus_mask[2]; -static int dcscb_power_up(unsigned int cpu, unsigned int cluster) +static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster) { unsigned int rst_hold, cpumask = (1 << cpu); - unsigned int all_mask; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - if (cpu >= 4 || cluster >= 2) + if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster])) return -EINVAL; - all_mask = dcscb_allcpus_mask[cluster]; + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold &= ~(cpumask | (cpumask << 4)); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + return 0; +} - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&dcscb_lock); - - dcscb_use_count[cpu][cluster]++; - if (dcscb_use_count[cpu][cluster] == 1) { - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - if (rst_hold & (1 << 8)) { - /* remove cluster reset and add individual CPU's reset */ - rst_hold &= ~(1 << 8); - rst_hold |= all_mask; - } - rst_hold &= ~(cpumask | (cpumask << 4)); - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - } else if (dcscb_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } +static int dcscb_cluster_powerup(unsigned int cluster) +{ + unsigned int rst_hold; - arch_spin_unlock(&dcscb_lock); - local_irq_enable(); + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= 2) + return -EINVAL; + /* remove cluster reset and add individual CPU's reset */ + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold &= ~(1 << 8); + rst_hold |= dcscb_allcpus_mask[cluster]; + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); return 0; } -static void dcscb_power_down(void) +static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask; - bool last_man = false, skip_wfi = false; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - cpumask = (1 << cpu); + unsigned int rst_hold; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= 4 || cluster >= 2); - - all_mask = dcscb_allcpus_mask[cluster]; - - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&dcscb_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - dcscb_use_count[cpu][cluster]--; - if (dcscb_use_count[cpu][cluster] == 0) { - rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); - rst_hold |= cpumask; - if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) { - rst_hold |= (1 << 8); - last_man = true; - } - writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); - } else if (dcscb_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else - BUG(); - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&dcscb_lock); - - /* Flush all cache levels for this cluster. */ - v7_exit_coherency_flush(all); - - /* - * A full outer cache flush could be needed at this point - * on platforms with such a cache, depending on where the - * outer cache sits. In some cases the notion of a "last - * cluster standing" would need to be implemented if the - * outer cache is shared across clusters. In any case, when - * the outer cache needs flushing, there is no concurrent - * access to the cache controller to worry about and no - * special locking besides what is already provided by the - * MCPM state machinery is needed. - */ - - /* - * Disable cluster-level coherency by masking - * incoming snoops and DVM messages: - */ - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - arch_spin_unlock(&dcscb_lock); - - /* Disable and flush the local CPU cache. */ - v7_exit_coherency_flush(louis); - } + BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster])); - __mcpm_cpu_down(cpu, cluster); + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= (1 << cpu); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); +} - /* Now we are prepared for power-down, do it: */ - dsb(); - if (!skip_wfi) - wfi(); +static void dcscb_cluster_powerdown_prepare(unsigned int cluster) +{ + unsigned int rst_hold; - /* Not dead at this point? Let our caller cope. */ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= 2); + + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= (1 << 8); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); } -static const struct mcpm_platform_ops dcscb_power_ops = { - .power_up = dcscb_power_up, - .power_down = dcscb_power_down, -}; +static void dcscb_cpu_cache_disable(void) +{ + /* Disable and flush the local CPU cache. */ + v7_exit_coherency_flush(louis); +} -static void __init dcscb_usage_count_init(void) +static void dcscb_cluster_cache_disable(void) { - unsigned int mpidr, cpu, cluster; + /* Flush all cache levels for this cluster. */ + v7_exit_coherency_flush(all); - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + /* + * A full outer cache flush could be needed at this point + * on platforms with such a cache, depending on where the + * outer cache sits. In some cases the notion of a "last + * cluster standing" would need to be implemented if the + * outer cache is shared across clusters. In any case, when + * the outer cache needs flushing, there is no concurrent + * access to the cache controller to worry about and no + * special locking besides what is already provided by the + * MCPM state machinery is needed. + */ - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - BUG_ON(cpu >= 4 || cluster >= 2); - dcscb_use_count[cpu][cluster] = 1; + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(read_cpuid_mpidr()); } +static const struct mcpm_platform_ops dcscb_power_ops = { + .cpu_powerup = dcscb_cpu_powerup, + .cluster_powerup = dcscb_cluster_powerup, + .cpu_powerdown_prepare = dcscb_cpu_powerdown_prepare, + .cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare, + .cpu_cache_disable = dcscb_cpu_cache_disable, + .cluster_cache_disable = dcscb_cluster_cache_disable, +}; + extern void dcscb_power_up_setup(unsigned int affinity_level); static int __init dcscb_init(void) @@ -213,7 +151,6 @@ static int __init dcscb_init(void) cfg = readl_relaxed(dcscb_base + DCS_CFG_R); dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; - dcscb_usage_count_init(); ret = mcpm_platform_register(&dcscb_power_ops); if (!ret) diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 2fb78b4648cb..b3328cd46c33 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/spinlock.h> #include <linux/errno.h> #include <linux/irqchip/arm-gic.h> @@ -44,101 +43,36 @@ static void __iomem *scc; -/* - * We can't use regular spinlocks. In the switcher case, it is possible - * for an outbound CPU to call power_down() after its inbound counterpart - * is already live using the same logical CPU number which trips lockdep - * debugging. - */ -static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED; - #define TC2_CLUSTERS 2 #define TC2_MAX_CPUS_PER_CLUSTER 3 static unsigned int tc2_nr_cpus[TC2_CLUSTERS]; -/* Keep per-cpu usage count to cope with unordered up/down requests */ -static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS]; - -#define tc2_cluster_unused(cluster) \ - (!tc2_pm_use_count[0][cluster] && \ - !tc2_pm_use_count[1][cluster] && \ - !tc2_pm_use_count[2][cluster]) - -static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster) +static int tc2_pm_cpu_powerup(unsigned int cpu, unsigned int cluster) { pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) return -EINVAL; - - /* - * Since this is called with IRQs enabled, and no arch_spin_lock_irq - * variant exists, we need to disable IRQs manually here. - */ - local_irq_disable(); - arch_spin_lock(&tc2_pm_lock); - - if (tc2_cluster_unused(cluster)) - ve_spc_powerdown(cluster, false); - - tc2_pm_use_count[cpu][cluster]++; - if (tc2_pm_use_count[cpu][cluster] == 1) { - ve_spc_set_resume_addr(cluster, cpu, - virt_to_phys(mcpm_entry_point)); - ve_spc_cpu_wakeup_irq(cluster, cpu, true); - } else if (tc2_pm_use_count[cpu][cluster] != 2) { - /* - * The only possible values are: - * 0 = CPU down - * 1 = CPU (still) up - * 2 = CPU requested to be up before it had a chance - * to actually make itself down. - * Any other value is a bug. - */ - BUG(); - } - - arch_spin_unlock(&tc2_pm_lock); - local_irq_enable(); - + ve_spc_set_resume_addr(cluster, cpu, + virt_to_phys(mcpm_entry_point)); + ve_spc_cpu_wakeup_irq(cluster, cpu, true); return 0; } -static void tc2_pm_down(u64 residency) +static int tc2_pm_cluster_powerup(unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - bool last_man = false, skip_wfi = false; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cluster %u\n", __func__, cluster); + if (cluster >= TC2_CLUSTERS) + return -EINVAL; + ve_spc_powerdown(cluster, false); + return 0; +} +static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) +{ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); - - __mcpm_cpu_going_down(cpu, cluster); - - arch_spin_lock(&tc2_pm_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); - tc2_pm_use_count[cpu][cluster]--; - if (tc2_pm_use_count[cpu][cluster] == 0) { - ve_spc_cpu_wakeup_irq(cluster, cpu, true); - if (tc2_cluster_unused(cluster)) { - ve_spc_powerdown(cluster, true); - ve_spc_global_wakeup_irq(true); - last_man = true; - } - } else if (tc2_pm_use_count[cpu][cluster] == 1) { - /* - * A power_up request went ahead of us. - * Even if we do not want to shut this CPU down, - * the caller expects a certain state as if the WFI - * was aborted. So let's continue with cache cleaning. - */ - skip_wfi = true; - } else - BUG(); - + ve_spc_cpu_wakeup_irq(cluster, cpu, true); /* * If the CPU is committed to power down, make sure * the power controller will be in charge of waking it @@ -146,55 +80,38 @@ static void tc2_pm_down(u64 residency) * to the CPU by disabling the GIC CPU IF to prevent wfi * from completing execution behind power controller back */ - if (!skip_wfi) - gic_cpu_if_down(); - - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - arch_spin_unlock(&tc2_pm_lock); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* - * On the Cortex-A15 we need to disable - * L2 prefetching before flushing the cache. - */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3 \n\t" - "isb \n\t" - "dsb " - : : "r" (0x400) ); - } - - v7_exit_coherency_flush(all); - - cci_disable_port_by_cpu(mpidr); - - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); - } else { - /* - * If last man then undo any setup done previously. - */ - if (last_man) { - ve_spc_powerdown(cluster, false); - ve_spc_global_wakeup_irq(false); - } - - arch_spin_unlock(&tc2_pm_lock); - - v7_exit_coherency_flush(louis); - } - - __mcpm_cpu_down(cpu, cluster); + gic_cpu_if_down(); +} - /* Now we are prepared for power-down, do it: */ - if (!skip_wfi) - wfi(); +static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= TC2_CLUSTERS); + ve_spc_powerdown(cluster, true); + ve_spc_global_wakeup_irq(true); +} - /* Not dead at this point? Let our caller cope. */ +static void tc2_pm_cpu_cache_disable(void) +{ + v7_exit_coherency_flush(louis); } -static void tc2_pm_power_down(void) +static void tc2_pm_cluster_cache_disable(void) { - tc2_pm_down(0); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + } + + v7_exit_coherency_flush(all); + cci_disable_port_by_cpu(read_cpuid_mpidr()); } static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) @@ -217,27 +134,21 @@ static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + /* - * Only examine the hardware state if the target CPU has - * caught up at least as far as tc2_pm_down(): + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: */ - if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { - pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", - __func__, cpu, cluster, - readl_relaxed(scc + RESET_CTRL)); - - /* - * We need the CPU to reach WFI, but the power - * controller may put the cluster in reset and - * power it off as soon as that happens, before - * we have a chance to see STANDBYWFI. - * - * So we need to check for both conditions: - */ - if (tc2_core_in_reset(cpu, cluster) || - ve_spc_cpu_in_wfi(cpu, cluster)) - return 0; /* success: the CPU is halted */ - } + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ /* Otherwise, wait and retry: */ msleep(POLL_MSEC); @@ -246,72 +157,40 @@ static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) return -ETIMEDOUT; /* timeout */ } -static void tc2_pm_suspend(u64 residency) +static void tc2_pm_cpu_suspend_prepare(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); - tc2_pm_down(residency); } -static void tc2_pm_powered_up(void) +static void tc2_pm_cpu_is_up(unsigned int cpu, unsigned int cluster) { - unsigned int mpidr, cpu, cluster; - unsigned long flags; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); - - local_irq_save(flags); - arch_spin_lock(&tc2_pm_lock); - - if (tc2_cluster_unused(cluster)) { - ve_spc_powerdown(cluster, false); - ve_spc_global_wakeup_irq(false); - } - - if (!tc2_pm_use_count[cpu][cluster]) - tc2_pm_use_count[cpu][cluster] = 1; - ve_spc_cpu_wakeup_irq(cluster, cpu, false); ve_spc_set_resume_addr(cluster, cpu, 0); +} - arch_spin_unlock(&tc2_pm_lock); - local_irq_restore(flags); +static void tc2_pm_cluster_is_up(unsigned int cluster) +{ + pr_debug("%s: cluster %u\n", __func__, cluster); + BUG_ON(cluster >= TC2_CLUSTERS); + ve_spc_powerdown(cluster, false); + ve_spc_global_wakeup_irq(false); } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, + .cpu_powerup = tc2_pm_cpu_powerup, + .cluster_powerup = tc2_pm_cluster_powerup, + .cpu_suspend_prepare = tc2_pm_cpu_suspend_prepare, + .cpu_powerdown_prepare = tc2_pm_cpu_powerdown_prepare, + .cluster_powerdown_prepare = tc2_pm_cluster_powerdown_prepare, + .cpu_cache_disable = tc2_pm_cpu_cache_disable, + .cluster_cache_disable = tc2_pm_cluster_cache_disable, .wait_for_powerdown = tc2_pm_wait_for_powerdown, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .cpu_is_up = tc2_pm_cpu_is_up, + .cluster_is_up = tc2_pm_cluster_is_up, }; -static bool __init tc2_pm_usage_count_init(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) { - pr_err("%s: boot CPU is out of bound!\n", __func__); - return false; - } - tc2_pm_use_count[cpu][cluster] = 1; - return true; -} - /* * Enable cluster-level coherency, in preparation for turning on the MMU. */ @@ -323,23 +202,9 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) " b cci_enable_port_for_self "); } -static void __init tc2_cache_off(void) -{ - pr_info("TC2: disabling cache during MCPM loopback test\n"); - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { - /* disable L2 prefetching on the Cortex-A15 */ - asm volatile( - "mcr p15, 1, %0, c15, c0, 3 \n\t" - "isb \n\t" - "dsb " - : : "r" (0x400) ); - } - v7_exit_coherency_flush(all); - cci_disable_port_by_cpu(read_cpuid_mpidr()); -} - static int __init tc2_pm_init(void) { + unsigned int mpidr, cpu, cluster; int ret, irq; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; @@ -379,14 +244,20 @@ static int __init tc2_pm_init(void) if (!cci_probed()) return -ENODEV; - if (!tc2_pm_usage_count_init()) + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) { + pr_err("%s: boot CPU is out of bound!\n", __func__); return -EINVAL; + } ret = mcpm_platform_register(&tc2_pm_power_ops); if (!ret) { mcpm_sync_init(tc2_pm_power_up_setup); /* test if we can (re)enable the CCI on our own */ - BUG_ON(mcpm_loopback(tc2_cache_off) != 0); + BUG_ON(mcpm_loopback(tc2_pm_cluster_cache_disable) != 0); pr_info("TC2 power management initialized\n"); } return ret; diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index 0958b6981773..e98d15eaa799 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -142,7 +142,7 @@ static int __init weim_parse_dt(struct platform_device *pdev, &pdev->dev); const struct imx_weim_devtype *devtype = of_id->data; struct device_node *child; - int ret; + int ret, have_child = 0; if (devtype == &imx50_weim_devtype) { ret = imx_weim_gpr_setup(pdev); @@ -155,14 +155,15 @@ static int __init weim_parse_dt(struct platform_device *pdev, continue; ret = weim_timing_setup(child, base, devtype); - if (ret) { - dev_err(&pdev->dev, "%s set timing failed.\n", + if (ret) + dev_warn(&pdev->dev, "%s set timing failed.\n", child->full_name); - return ret; - } + else + have_child = 1; } - ret = of_platform_populate(pdev->dev.of_node, + if (have_child) + ret = of_platform_populate(pdev->dev.of_node, of_default_bus_match_table, NULL, &pdev->dev); if (ret) diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h index b690cdba163b..8780868458a0 100644 --- a/include/dt-bindings/clock/imx6qdl-clock.h +++ b/include/dt-bindings/clock/imx6qdl-clock.h @@ -248,6 +248,9 @@ #define IMX6QDL_PLL6_BYPASS 235 #define IMX6QDL_PLL7_BYPASS 236 #define IMX6QDL_CLK_GPT_3M 237 -#define IMX6QDL_CLK_END 238 +#define IMX6QDL_CLK_VIDEO_27M 238 +#define IMX6QDL_CLK_MIPI_CORE_CFG 239 +#define IMX6QDL_CLK_MIPI_IPG 240 +#define IMX6QDL_CLK_END 241 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */ diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index c877cad61a13..d16f4c82c568 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -207,6 +207,7 @@ #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6) #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6) #define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6) +#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4 #define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4) #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4) #define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4) |
