diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h | 63 | ||||
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 780 | ||||
| -rw-r--r-- | include/dt-bindings/clock/sun8i-a23-a33-ccu.h | 127 | ||||
| -rw-r--r-- | include/dt-bindings/reset/sun8i-a23-a33-ccu.h | 87 |
7 files changed, 1071 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index eac458720b28..8fd765ea3660 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding Required properties : - compatible: must contain one of the following compatibles: - "allwinner,sun6i-a31-ccu" + - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-h3-ccu" - reg: Must contain the registers base address and length diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index c7258779daa8..dff3feff9c3c 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -65,6 +65,18 @@ config SUN6I_A31_CCU select SUNXI_CCU_PHASE default MACH_SUN6I +config SUN8I_A33_CCU + bool "Support for the Allwinner A33 CCU" + select SUNXI_CCU_DIV + select SUNXI_CCU_MULT + select SUNXI_CCU_NK + select SUNXI_CCU_NKM + select SUNXI_CCU_NKMP + select SUNXI_CCU_NM + select SUNXI_CCU_MP + select SUNXI_CCU_PHASE + default MACH_SUN8I + config SUN8I_H3_CCU bool "Support for the Allwinner H3 CCU" select SUNXI_CCU_DIV diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 462a5f8383ed..4f7e99fb433f 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -19,4 +19,5 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o # SoC support obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o +obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h b/drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h new file mode 100644 index 000000000000..62c0f8d49ef8 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h @@ -0,0 +1,63 @@ +/* + * Copyright 2016 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CCU_SUN8I_A23_A33_H_ +#define _CCU_SUN8I_A23_A33_H_ + +#include <dt-bindings/clock/sun8i-a23-a33-ccu.h> +#include <dt-bindings/reset/sun8i-a23-a33-ccu.h> + +#define CLK_PLL_CPUX 0 +#define CLK_PLL_AUDIO_BASE 1 +#define CLK_PLL_AUDIO 2 +#define CLK_PLL_AUDIO_2X 3 +#define CLK_PLL_AUDIO_4X 4 +#define CLK_PLL_AUDIO_8X 5 +#define CLK_PLL_VIDEO 6 +#define CLK_PLL_VIDEO_2X 7 +#define CLK_PLL_VE 8 +#define CLK_PLL_DDR0 9 +#define CLK_PLL_PERIPH 10 +#define CLK_PLL_PERIPH_2X 11 +#define CLK_PLL_GPU 12 +#define CLK_PLL_MIPI 13 +#define CLK_PLL_HSIC 14 +#define CLK_PLL_DE 15 +#define CLK_PLL_DDR1 16 +#define CLK_PLL_DDR 17 + +/* The CPUX clock is exported */ + +#define CLK_AXI 19 +#define CLK_AHB1 20 +#define CLK_APB1 21 +#define CLK_APB2 22 + +/* All the bus gates are exported */ + +/* The first part of the mod clocks is exported */ + +#define CLK_DRAM 79 + +/* Some more module clocks are exported */ + +#define CLK_MBUS 95 + +/* And the last module clocks are exported */ + +#define CLK_NUMBER (CLK_ATS + 1) + +#endif /* _CCU_SUN8I_A23_A33_H_ */ diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c new file mode 100644 index 000000000000..fc00892906d8 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c @@ -0,0 +1,780 @@ +/* + * Copyright (c) 2016 Maxime Ripard. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/of_address.h> + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" +#include "ccu_phase.h" + +#include "ccu-sun8i-a23-a33.h" + +static struct ccu_nkmp pll_cpux_clk = { + .enable = BIT(31), + .lock = BIT(28), + + .n = _SUNXI_CCU_MULT(8, 5), + .k = _SUNXI_CCU_MULT(4, 2), + .m = _SUNXI_CCU_DIV(0, 2), + .p = _SUNXI_CCU_DIV_MAX(16, 2, 4), + + .common = { + .reg = 0x000, + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M", + &ccu_nkmp_ops, + 0), + }, +}; + +/* + * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from + * the base (2x, 4x and 8x), and one variable divider (the one true + * pll audio). + * + * We don't have any need for the variable divider for now, so we just + * hardcode it to match with the clock names + */ +#define SUN8I_A33_PLL_AUDIO_REG 0x008 + +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base", + "osc24M", 0x008, + 8, 7, /* N */ + 0, 5, /* M */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video", + "osc24M", 0x010, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve", + "osc24M", 0x018, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0", + "osc24M", 0x020, + 8, 5, /* N */ + 4, 2, /* K */ + 0, 2, /* M */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph_clk, "pll-periph", + "osc24M", 0x028, + 8, 5, /* N */ + 4, 2, /* K */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 2, /* post-div */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu", + "osc24M", 0x038, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +/* + * The MIPI PLL has 2 modes: "MIPI" and "HDMI". + * + * The MIPI mode is a standard NKM-style clock. The HDMI mode is an + * integer / fractional clock with switchable multipliers and dividers. + * This is not supported here. We hardcode the PLL to MIPI mode. + */ +#define SUN8I_A33_PLL_MIPI_REG 0x040 +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi", + "pll-video", 0x040, + 8, 4, /* N */ + 4, 2, /* K */ + 0, 4, /* M */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic", + "osc24M", 0x044, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de", + "osc24M", 0x048, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +/* TODO: Fix N */ +static SUNXI_CCU_N_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1", + "osc24M", 0x04c, + 8, 6, /* N */ + BIT(31), /* gate */ + BIT(28), /* lock */ + CLK_SET_RATE_UNGATE); + +static const char * const cpux_parents[] = { "osc32k", "osc24M", + "pll-cpux" , "pll-cpux" }; +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents, + 0x050, 16, 2, CLK_IS_CRITICAL); + +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0); + +static const char * const ahb1_parents[] = { "osc32k", "osc24M", + "axi" , "pll-periph" }; +static struct ccu_div ahb1_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 12, + .width = 2, + + .variable_prediv = { + .index = 3, + .shift = 6, + .width = 2, + }, + }, + + .common = { + .reg = 0x054, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("ahb1", + ahb1_parents, + &ccu_div_ops, + 0), + }, +}; + +static struct clk_div_table apb1_div_table[] = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { /* Sentinel */ }, +}; +static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1", + 0x054, 8, 2, apb1_div_table, 0); + +static const char * const apb2_parents[] = { "osc32k", "osc24M", + "pll-periph" , "pll-periph" }; +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058, + 0, 5, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + 0); + +static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1", + 0x060, BIT(1), 0); +static SUNXI_CCU_GATE(bus_ss_clk, "bus-ss", "ahb1", + 0x060, BIT(5), 0); +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1", + 0x060, BIT(6), 0); +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1", + 0x060, BIT(8), 0); +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1", + 0x060, BIT(9), 0); +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1", + 0x060, BIT(10), 0); +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1", + 0x060, BIT(13), 0); +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1", + 0x060, BIT(14), 0); +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1", + 0x060, BIT(19), 0); +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1", + 0x060, BIT(20), 0); +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1", + 0x060, BIT(21), 0); +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1", + 0x060, BIT(24), 0); +static SUNXI_CCU_GATE(bus_ehci_clk, "bus-ehci", "ahb1", + 0x060, BIT(26), 0); +static SUNXI_CCU_GATE(bus_ohci_clk, "bus-ohci", "ahb1", + 0x060, BIT(29), 0); + +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1", + 0x064, BIT(0), 0); +static SUNXI_CCU_GATE(bus_lcd_clk, "bus-lcd", "ahb1", + 0x064, BIT(4), 0); +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1", + 0x064, BIT(8), 0); +static SUNXI_CCU_GATE(bus_de_be_clk, "bus-de-be", "ahb1", + 0x064, BIT(12), 0); +static SUNXI_CCU_GATE(bus_de_fe_clk, "bus-de-fe", "ahb1", + 0x064, BIT(14), 0); +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1", + 0x064, BIT(20), 0); +static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1", + 0x064, BIT(21), 0); +static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1", + 0x064, BIT(22), 0); +static SUNXI_CCU_GATE(bus_drc_clk, "bus-drc", "ahb1", + 0x064, BIT(25), 0); +static SUNXI_CCU_GATE(bus_sat_clk, "bus-sat", "ahb1", + 0x064, BIT(26), 0); + +static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1", + 0x068, BIT(0), 0); +static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1", + 0x068, BIT(5), 0); +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", + 0x068, BIT(12), 0); +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", + 0x068, BIT(13), 0); + +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", + 0x06c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", + 0x06c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", + 0x06c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", + 0x06c, BIT(16), 0); +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", + 0x06c, BIT(17), 0); +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", + 0x06c, BIT(18), 0); +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", + 0x06c, BIT(19), 0); +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", + 0x06c, BIT(20), 0); + +static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0", + 0x088, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0", + 0x088, 8, 3, 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1", + 0x08c, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1", + 0x08c, 8, 3, 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2", + 0x090, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2", + 0x090, 8, 3, 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x", + "pll-audio-2x", "pll-audio" }; +static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents, + 0x0b0, 16, 2, BIT(31), 0); + +static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents, + 0x0b4, 16, 2, BIT(31), 0); + +/* TODO: the parent for most of the USB clocks is not known */ +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", + 0x0cc, BIT(8), 0); +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", + 0x0cc, BIT(9), 0); +static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", + 0x0cc, BIT(10), 0); +static SUNXI_CCU_GATE(usb_hsic_12M_clk, "usb-hsic-12M", "osc24M", + 0x0cc, BIT(11), 0); +static SUNXI_CCU_GATE(usb_ohci_clk, "usb-ohci", "osc24M", + 0x0cc, BIT(16), 0); + +static SUNXI_CCU_M(dram_clk, "dram", "pll-ddr", + 0x0f4, 0, 4, CLK_IS_CRITICAL); + +static const char * const pll_ddr_parents[] = { "pll-ddr0", "pll-ddr1" }; +static SUNXI_CCU_MUX(pll_ddr_clk, "pll-ddr", pll_ddr_parents, + 0x0f8, 16, 1, 0); + +static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram", + 0x100, BIT(0), 0); +static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram", + 0x100, BIT(1), 0); +static SUNXI_CCU_GATE(dram_drc_clk, "dram-drc", "dram", + 0x100, BIT(16), 0); +static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "dram", + 0x100, BIT(24), 0); +static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "dram", + 0x100, BIT(26), 0); + +static const char * const de_parents[] = { "pll-video", "pll-periph-2x", + "pll-gpu", "pll-de" }; +static const u8 de_table[] = { 0, 2, 3, 5 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_be_clk, "de-be", + de_parents, de_table, + 0x104, 0, 4, 24, 3, BIT(31), 0); + +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(de_fe_clk, "de-fe", + de_parents, de_table, + 0x10c, 0, 4, 24, 3, BIT(31), 0); + +static const char * const lcd_ch0_parents[] = { "pll-video", "pll-video-2x", + "pll-mipi" }; +static const u8 lcd_ch0_table[] = { 0, 2, 4 }; +static SUNXI_CCU_MUX_TABLE_WITH_GATE(lcd_ch0_clk, "lcd-ch0", + lcd_ch0_parents, lcd_ch0_table, + 0x118, 24, 3, BIT(31), + CLK_SET_RATE_PARENT); + +static const char * const lcd_ch1_parents[] = { "pll-video", "pll-video-2x" }; +static const u8 lcd_ch1_table[] = { 0, 2 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd_ch1_clk, "lcd-ch1", + lcd_ch1_parents, lcd_ch1_table, + 0x12c, 0, 4, 24, 2, BIT(31), 0); + +static const char * const csi_sclk_parents[] = { "pll-video", "pll-de", + "pll-mipi", "pll-ve" }; +static const u8 csi_sclk_table[] = { 0, 3, 4, 5 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_sclk_clk, "csi-sclk", + csi_sclk_parents, csi_sclk_table, + 0x134, 16, 4, 24, 3, BIT(31), 0); + +static const char * const csi_mclk_parents[] = { "pll-video", "pll-de", + "osc24M" }; +static const u8 csi_mclk_table[] = { 0, 3, 5 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_mclk_clk, "csi-mclk", + csi_mclk_parents, csi_mclk_table, + 0x134, 0, 5, 8, 3, BIT(15), 0); + +static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", + 0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio", + 0x140, BIT(31), 0); +static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x", + 0x140, BIT(30), 0); +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", + 0x144, BIT(31), 0); + +static const char * const mbus_parents[] = { "osc24M", "pll-periph-2x", + "pll-ddr0", "pll-ddr1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, + 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL); + +static const char * const dsi_sclk_parents[] = { "pll-video", "pll-video-2x" }; +static const u8 dsi_sclk_table[] = { 0, 2 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_sclk_clk, "dsi-sclk", + dsi_sclk_parents, dsi_sclk_table, + 0x168, 16, 4, 24, 2, BIT(31), 0); + +static const char * const dsi_dphy_parents[] = { "pll-video", "pll-periph" }; +static const u8 dsi_dphy_table[] = { 0, 2 }; +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy", + dsi_dphy_parents, dsi_dphy_table, + 0x168, 0, 4, 8, 2, BIT(15), 0); + +static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(drc_clk, "drc", + de_parents, de_table, + 0x180, 0, 4, 24, 3, BIT(31), 0); + +static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu", + 0x1a0, 0, 3, BIT(31), 0); + +static const char * const ats_parents[] = { "osc24M", "pll-periph" }; +static SUNXI_CCU_M_WITH_MUX_GATE(ats_clk, "ats", ats_parents, + 0x1b0, 0, 3, 24, 2, BIT(31), 0); + +static struct ccu_common *sun8i_a33_ccu_clks[] = { + &pll_cpux_clk.common, + &pll_audio_base_clk.common, + &pll_video_clk.common, + &pll_ve_clk.common, + &pll_ddr0_clk.common, + &pll_periph_clk.common, + &pll_gpu_clk.common, + &pll_mipi_clk.common, + &pll_hsic_clk.common, + &pll_de_clk.common, + &pll_ddr1_clk.common, + &pll_ddr_clk.common, + &cpux_clk.common, + &axi_clk.common, + &ahb1_clk.common, + &apb1_clk.common, + &apb2_clk.common, + &bus_mipi_dsi_clk.common, + &bus_ss_clk.common, + &bus_dma_clk.common, + &bus_mmc0_clk.common, + &bus_mmc1_clk.common, + &bus_mmc2_clk.common, + &bus_nand_clk.common, + &bus_dram_clk.common, + &bus_hstimer_clk.common, + &bus_spi0_clk.common, + &bus_spi1_clk.common, + &bus_otg_clk.common, + &bus_ehci_clk.common, + &bus_ohci_clk.common, + &bus_ve_clk.common, + &bus_lcd_clk.common, + &bus_csi_clk.common, + &bus_de_fe_clk.common, + &bus_de_be_clk.common, + &bus_gpu_clk.common, + &bus_msgbox_clk.common, + &bus_spinlock_clk.common, + &bus_drc_clk.common, + &bus_sat_clk.common, + &bus_codec_clk.common, + &bus_pio_clk.common, + &bus_i2s0_clk.common, + &bus_i2s1_clk.common, + &bus_i2c0_clk.common, + &bus_i2c1_clk.common, + &bus_i2c2_clk.common, + &bus_uart0_clk.common, + &bus_uart1_clk.common, + &bus_uart2_clk.common, + &bus_uart3_clk.common, + &bus_uart4_clk.common, + &nand_clk.common, + &mmc0_clk.common, + &mmc0_sample_clk.common, + &mmc0_output_clk.common, + &mmc1_clk.common, + &mmc1_sample_clk.common, + &mmc1_output_clk.common, + &mmc2_clk.common, + &mmc2_sample_clk.common, + &mmc2_output_clk.common, + &ss_clk.common, + &spi0_clk.common, + &spi1_clk.common, + &i2s0_clk.common, + &i2s1_clk.common, + &usb_phy0_clk.common, + &usb_phy1_clk.common, + &usb_hsic_clk.common, + &usb_hsic_12M_clk.common, + &usb_ohci_clk.common, + &dram_clk.common, + &dram_ve_clk.common, + &dram_csi_clk.common, + &dram_drc_clk.common, + &dram_de_fe_clk.common, + &dram_de_be_clk.common, + &de_be_clk.common, + &de_fe_clk.common, + &lcd_ch0_clk.common, + &lcd_ch1_clk.common, + &csi_sclk_clk.common, + &csi_mclk_clk.common, + &ve_clk.common, + &ac_dig_clk.common, + &ac_dig_4x_clk.common, + &avs_clk.common, + &mbus_clk.common, + &dsi_sclk_clk.common, + &dsi_dphy_clk.common, + &drc_clk.common, + &gpu_clk.common, + &ats_clk.common, +}; + +/* We hardcode the divider to 4 for now */ +static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio", + "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x", + "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x", + "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x", + "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_periph_2x_clk, "pll-periph-2x", + "pll-periph", 1, 2, 0); +static CLK_FIXED_FACTOR(pll_video_2x_clk, "pll-video-2x", + "pll-video", 1, 2, 0); + +static struct clk_hw_onecell_data sun8i_a33_hw_clks = { + .hws = { + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw, + [CLK_PLL_AUDIO] = &pll_audio_clk.hw, + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw, + [CLK_PLL_VIDEO] = &pll_video_clk.common.hw, + [CLK_PLL_VIDEO_2X] = &pll_video_2x_clk.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw, + [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw, + [CLK_PLL_PERIPH_2X] = &pll_periph_2x_clk.hw, + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, + [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw, + [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw, + [CLK_PLL_DE] = &pll_de_clk.common.hw, + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw, + [CLK_PLL_DDR] = &pll_ddr_clk.common.hw, + [CLK_CPUX] = &cpux_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_AHB1] = &ahb1_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw, + [CLK_BUS_SS] = &bus_ss_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_NAND] = &bus_nand_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_EHCI] = &bus_ehci_clk.common.hw, + [CLK_BUS_OHCI] = &bus_ohci_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_LCD] = &bus_lcd_clk.common.hw, + [CLK_BUS_CSI] = &bus_csi_clk.common.hw, + [CLK_BUS_DE_BE] = &bus_de_be_clk.common.hw, + [CLK_BUS_DE_FE] = &bus_de_fe_clk.common.hw, + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw, + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw, + [CLK_BUS_DRC] = &bus_drc_clk.common.hw, + [CLK_BUS_SAT] = &bus_sat_clk.common.hw, + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw, + [CLK_BUS_PIO] = &bus_pio_clk.common.hw, + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw, + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw, + [CLK_NAND] = &nand_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw, + [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw, + [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw, + [CLK_MMC2] = &mmc2_clk.common.hw, + [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw, + [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw, + [CLK_SS] = &ss_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_SPI1] = &spi1_clk.common.hw, + [CLK_I2S0] = &i2s0_clk.common.hw, + [CLK_I2S1] = &i2s1_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, + [CLK_USB_HSIC] = &usb_hsic_clk.common.hw, + [CLK_USB_HSIC_12M] = &usb_hsic_12M_clk.common.hw, + [CLK_USB_OHCI] = &usb_ohci_clk.common.hw, + [CLK_DRAM] = &dram_clk.common.hw, + [CLK_DRAM_VE] = &dram_ve_clk.common.hw, + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw, + [CLK_DRAM_DRC] = &dram_drc_clk.common.hw, + [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw, + [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw, + [CLK_DE_BE] = &de_be_clk.common.hw, + [CLK_DE_FE] = &de_fe_clk.common.hw, + [CLK_LCD_CH0] = &lcd_ch0_clk.common.hw, + [CLK_LCD_CH1] = &lcd_ch1_clk.common.hw, + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw, + [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_AC_DIG] = &ac_dig_clk.common.hw, + [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_DSI_SCLK] = &dsi_sclk_clk.common.hw, + [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw, + [CLK_DRC] = &drc_clk.common.hw, + [CLK_GPU] = &gpu_clk.common.hw, + [CLK_ATS] = &ats_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun8i_a33_ccu_resets[] = { + [RST_USB_PHY0] = { 0x0cc, BIT(0) }, + [RST_USB_PHY1] = { 0x0cc, BIT(1) }, + [RST_USB_HSIC] = { 0x0cc, BIT(2) }, + + [RST_MBUS] = { 0x0fc, BIT(31) }, + + [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) }, + [RST_BUS_SS] = { 0x2c0, BIT(5) }, + [RST_BUS_DMA] = { 0x2c0, BIT(6) }, + [RST_BUS_MMC0] = { 0x2c0, BIT(8) }, + [RST_BUS_MMC1] = { 0x2c0, BIT(9) }, + [RST_BUS_MMC2] = { 0x2c0, BIT(10) }, + [RST_BUS_NAND] = { 0x2c0, BIT(13) }, + [RST_BUS_DRAM] = { 0x2c0, BIT(14) }, + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) }, + [RST_BUS_SPI0] = { 0x2c0, BIT(20) }, + [RST_BUS_SPI1] = { 0x2c0, BIT(21) }, + [RST_BUS_OTG] = { 0x2c0, BIT(24) }, + [RST_BUS_EHCI] = { 0x2c0, BIT(26) }, + [RST_BUS_OHCI] = { 0x2c0, BIT(29) }, + + [RST_BUS_VE] = { 0x2c4, BIT(0) }, + [RST_BUS_LCD] = { 0x2c4, BIT(4) }, + [RST_BUS_CSI] = { 0x2c4, BIT(8) }, + [RST_BUS_DE_BE] = { 0x2c4, BIT(12) }, + [RST_BUS_DE_FE] = { 0x2c4, BIT(14) }, + [RST_BUS_GPU] = { 0x2c4, BIT(20) }, + [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) }, + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) }, + [RST_BUS_DRC] = { 0x2c4, BIT(25) }, + [RST_BUS_SAT] = { 0x2c4, BIT(26) }, + + [RST_BUS_LVDS] = { 0x2c8, BIT(0) }, + + [RST_BUS_CODEC] = { 0x2d0, BIT(0) }, + [RST_BUS_I2S0] = { 0x2d0, BIT(12) }, + [RST_BUS_I2S1] = { 0x2d0, BIT(13) }, + + [RST_BUS_I2C0] = { 0x2d4, BIT(0) }, + [RST_BUS_I2C1] = { 0x2d4, BIT(1) }, + [RST_BUS_I2C2] = { 0x2d4, BIT(2) }, + [RST_BUS_UART0] = { 0x2d4, BIT(16) }, + [RST_BUS_UART1] = { 0x2d4, BIT(17) }, + [RST_BUS_UART2] = { 0x2d4, BIT(18) }, + [RST_BUS_UART3] = { 0x2d4, BIT(19) }, + [RST_BUS_UART4] = { 0x2d4, BIT(20) }, +}; + +static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = { + .ccu_clks = sun8i_a33_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun8i_a33_ccu_clks), + + .hw_clks = &sun8i_a33_hw_clks, + + .resets = sun8i_a33_ccu_resets, + .num_resets = ARRAY_SIZE(sun8i_a33_ccu_resets), +}; + +static void __init sun8i_a33_ccu_setup(struct device_node *node) +{ + void __iomem *reg; + u32 val; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("%s: Could not map the clock registers\n", + of_node_full_name(node)); + return; + } + + /* Force the PLL-Audio-1x divider to 4 */ + val = readl(reg + SUN8I_A33_PLL_AUDIO_REG); + val &= ~GENMASK(19, 16); + writel(val | (3 << 16), reg + SUN8I_A33_PLL_AUDIO_REG); + + /* Force PLL-MIPI to MIPI mode */ + val = readl(reg + SUN8I_A33_PLL_MIPI_REG); + val &= ~BIT(16); + writel(val, reg + SUN8I_A33_PLL_MIPI_REG); + + sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc); +} +CLK_OF_DECLARE(sun8i_a33_ccu, "allwinner,sun8i-a33-ccu", + sun8i_a33_ccu_setup); diff --git a/include/dt-bindings/clock/sun8i-a23-a33-ccu.h b/include/dt-bindings/clock/sun8i-a23-a33-ccu.h new file mode 100644 index 000000000000..f8222b6b2cc3 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-a23-a33-ccu.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ +#define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ + +#define CLK_CPUX 18 + +#define CLK_BUS_MIPI_DSI 23 +#define CLK_BUS_SS 24 +#define CLK_BUS_DMA 25 +#define CLK_BUS_MMC0 26 +#define CLK_BUS_MMC1 27 +#define CLK_BUS_MMC2 28 +#define CLK_BUS_NAND 29 +#define CLK_BUS_DRAM 30 +#define CLK_BUS_HSTIMER 31 +#define CLK_BUS_SPI0 32 +#define CLK_BUS_SPI1 33 +#define CLK_BUS_OTG 34 +#define CLK_BUS_EHCI 35 +#define CLK_BUS_OHCI 36 +#define CLK_BUS_VE 37 +#define CLK_BUS_LCD 38 +#define CLK_BUS_CSI 39 +#define CLK_BUS_DE_BE 40 +#define CLK_BUS_DE_FE 41 +#define CLK_BUS_GPU 42 +#define CLK_BUS_MSGBOX 43 +#define CLK_BUS_SPINLOCK 44 +#define CLK_BUS_DRC 45 +#define CLK_BUS_SAT 46 +#define CLK_BUS_CODEC 47 +#define CLK_BUS_PIO 48 +#define CLK_BUS_I2S0 49 +#define CLK_BUS_I2S1 50 +#define CLK_BUS_I2C0 51 +#define CLK_BUS_I2C1 52 +#define CLK_BUS_I2C2 53 +#define CLK_BUS_UART0 54 +#define CLK_BUS_UART1 55 +#define CLK_BUS_UART2 56 +#define CLK_BUS_UART3 57 +#define CLK_BUS_UART4 58 +#define CLK_NAND 59 +#define CLK_MMC0 60 +#define CLK_MMC0_SAMPLE 61 +#define CLK_MMC0_OUTPUT 62 +#define CLK_MMC1 63 +#define CLK_MMC1_SAMPLE 64 +#define CLK_MMC1_OUTPUT 65 +#define CLK_MMC2 66 +#define CLK_MMC2_SAMPLE 67 +#define CLK_MMC2_OUTPUT 68 +#define CLK_SS 69 +#define CLK_SPI0 70 +#define CLK_SPI1 71 +#define CLK_I2S0 72 +#define CLK_I2S1 73 +#define CLK_USB_PHY0 74 +#define CLK_USB_PHY1 75 +#define CLK_USB_HSIC 76 +#define CLK_USB_HSIC_12M 77 +#define CLK_USB_OHCI 78 + +#define CLK_DRAM_VE 80 +#define CLK_DRAM_CSI 81 +#define CLK_DRAM_DRC 82 +#define CLK_DRAM_DE_FE 83 +#define CLK_DRAM_DE_BE 84 +#define CLK_DE_BE 85 +#define CLK_DE_FE 86 +#define CLK_LCD_CH0 87 +#define CLK_LCD_CH1 88 +#define CLK_CSI_SCLK 89 +#define CLK_CSI_MCLK 90 +#define CLK_VE 91 +#define CLK_AC_DIG 92 +#define CLK_AC_DIG_4X 93 +#define CLK_AVS 94 + +#define CLK_DSI_SCLK 96 +#define CLK_DSI_DPHY 97 +#define CLK_DRC 98 +#define CLK_GPU 99 +#define CLK_ATS 100 + +#endif /* _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ */ diff --git a/include/dt-bindings/reset/sun8i-a23-a33-ccu.h b/include/dt-bindings/reset/sun8i-a23-a33-ccu.h new file mode 100644 index 000000000000..6121f2b0cd0a --- /dev/null +++ b/include/dt-bindings/reset/sun8i-a23-a33-ccu.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN8I_A23_A33_H_ +#define _DT_BINDINGS_RST_SUN8I_A23_A33_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_HSIC 2 +#define RST_MBUS 3 +#define RST_BUS_MIPI_DSI 4 +#define RST_BUS_SS 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MMC0 7 +#define RST_BUS_MMC1 8 +#define RST_BUS_MMC2 9 +#define RST_BUS_NAND 10 +#define RST_BUS_DRAM 11 +#define RST_BUS_HSTIMER 12 +#define RST_BUS_SPI0 13 +#define RST_BUS_SPI1 14 +#define RST_BUS_OTG 15 +#define RST_BUS_EHCI 16 +#define RST_BUS_OHCI 17 +#define RST_BUS_VE 18 +#define RST_BUS_LCD 19 +#define RST_BUS_CSI 20 +#define RST_BUS_DE_BE 21 +#define RST_BUS_DE_FE 22 +#define RST_BUS_GPU 23 +#define RST_BUS_MSGBOX 24 +#define RST_BUS_SPINLOCK 25 +#define RST_BUS_DRC 26 +#define RST_BUS_SAT 27 +#define RST_BUS_LVDS 28 +#define RST_BUS_CODEC 29 +#define RST_BUS_I2S0 30 +#define RST_BUS_I2S1 31 +#define RST_BUS_I2C0 32 +#define RST_BUS_I2C1 33 +#define RST_BUS_I2C2 34 +#define RST_BUS_UART0 35 +#define RST_BUS_UART1 36 +#define RST_BUS_UART2 37 +#define RST_BUS_UART3 38 +#define RST_BUS_UART4 39 + +#endif /* _DT_BINDINGS_RST_SUN8I_A23_A33_H_ */ |
