diff options
| -rw-r--r-- | arch/mips/alchemy/Kconfig | 10 | ||||
| -rw-r--r-- | arch/mips/alchemy/Platform | 9 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 245 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1200.c | 471 | ||||
| -rw-r--r-- | arch/mips/configs/pb1200_defconfig | 170 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-db1x00/db1200.h | 11 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-pb1x00/pb1200.h | 139 |
8 files changed, 238 insertions, 818 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index a1b995ff517b..e1b3be787f80 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -42,7 +42,7 @@ config MIPS_DB1100 select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 - bool "Alchemy DB1200 board" + bool "Alchemy DB1200/PB1200 board" select ALCHEMY_GPIOINT_AU1000 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE @@ -85,14 +85,6 @@ config MIPS_PB1100 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_PB1200 - bool "Alchemy PB1200 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_PB1500 bool "Alchemy PB1500 board" select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index c032f5b5f889..bbdcc150d04d 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -26,13 +26,6 @@ cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # -# AMD Alchemy Pb1200 eval board -# -platform-$(CONFIG_MIPS_PB1200) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 -load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 - -# # AMD Alchemy Db1000 eval board # platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ @@ -61,7 +54,7 @@ cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # -# AMD Alchemy Db1200 eval board +# AMD Alchemy Db1200/Pb1200 eval boards # platform-$(CONFIG_MIPS_DB1200) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index f5628523c694..2fbf17909200 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -5,7 +5,6 @@ obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MIPS_PB1100) += pb1100.o -obj-$(CONFIG_MIPS_PB1200) += pb1200.o obj-$(CONFIG_MIPS_PB1500) += pb1500.o obj-$(CONFIG_MIPS_PB1550) += pb1550.o obj-$(CONFIG_MIPS_DB1000) += db1x00.o diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index e2cc5f921538..ec481f33aecc 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -1,5 +1,5 @@ /* - * DBAu1200 board platform device registration + * DBAu1200/PBAu1200 board platform device registration * * Copyright (C) 2008-2011 Manuel Lauss * @@ -44,10 +44,41 @@ #include "platform.h" +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_PB1200_DDR1: + case BCSR_WHOAMI_PB1200_DDR2: + return "PB1200"; + case BCSR_WHOAMI_DB1200: + return "DB1200"; + default: + return "(unknown)"; + } +} const char *get_system_type(void) { - return "DB1200"; + return board_type_str(); +} + +static int __init detect_board(void) +{ + int bid; + + /* try the PB1200 first */ + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) + return 0; + + /* okay, try the DB1200 then */ + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + return bid == BCSR_WHOAMI_DB1200 ? 0 : 1; } void __init board_setup(void) @@ -55,12 +86,14 @@ void __init board_setup(void) unsigned long freq0, clksrc, div, pfc; unsigned short whoami; - bcsr_init(DB1200_BCSR_PHYS_ADDR, - DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + if (detect_board()) { + printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n"); + return; + } whoami = bcsr_read(BCSR_WHOAMI); - printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" - " Board-ID %d Daughtercard ID %d\n", + printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", board_type_str(), (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); /* SMBus/SPI on PSC0, Audio on PSC1 */ @@ -96,7 +129,7 @@ void __init board_setup(void) static struct mtd_partition db1200_spiflash_parts[] = { { - .name = "DB1200 SPI flash", + .name = "spi_flash", .offset = 0, .size = MTDPART_SIZ_FULL, }, @@ -376,12 +409,109 @@ static struct led_classdev db1200_mmc_led = { .brightness_set = db1200_mmcled_set, }; -static struct au1xmmc_platform_data db1200mmc_platdata = { - .cd_setup = db1200_mmc_cd_setup, - .set_power = db1200_mmc_set_power, - .card_inserted = db1200_mmc_card_inserted, - .card_readonly = db1200_mmc_card_readonly, - .led = &db1200_mmc_led, +/* -- */ + +static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == PB1200_SD1_INSERT_INT) { + disable_irq_nosync(PB1200_SD1_INSERT_INT); + enable_irq(PB1200_SD1_EJECT_INT); + } else { + disable_irq_nosync(PB1200_SD1_EJECT_INT); + enable_irq(PB1200_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int pb1200_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0, + "sd1_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0, + "sd1_eject", mmc_host); + if (ret) { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) + enable_irq(PB1200_SD1_EJECT_INT); + else + enable_irq(PB1200_SD1_INSERT_INT); + + } else { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + free_irq(PB1200_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void pb1200_mmc1led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev pb1200_mmc1_led = { + .brightness_set = pb1200_mmc1led_set, +}; + +static void pb1200_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static int pb1200_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200_mmc1_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; +} + + +static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, + [1] = { + .cd_setup = pb1200_mmc1_cd_setup, + .set_power = pb1200_mmc1_set_power, + .card_inserted = pb1200_mmc1_card_inserted, + .card_readonly = pb1200_mmc1_card_readonly, + .led = &pb1200_mmc1_led, + }, }; static struct resource au1200_mmc0_resources[] = { @@ -415,12 +545,47 @@ static struct platform_device db1200_mmc0_dev = { .dev = { .dma_mask = &au1xxx_mmc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &db1200mmc_platdata, + .platform_data = &db1200_mmc_platdata[0], }, .num_resources = ARRAY_SIZE(au1200_mmc0_resources), .resource = au1200_mmc0_resources, }; +static struct resource au1200_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX1, + .end = AU1200_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX1, + .end = AU1200_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_res), + .resource = au1200_mmc1_res, +}; + /**********************************************************************/ static int db1200fb_panel_index(void) @@ -598,14 +763,50 @@ static struct platform_device *db1200_devs[] __initdata = { &db1200_sound_dev, }; +static struct platform_device *pb1200_devs[] __initdata = { + &pb1200_mmc1_dev, +}; + +/* Some peripheral base addresses differ on the PB1200 */ +static int __init pb1200_res_fixup(void) +{ + /* CPLD Revs earlier than 4 cause problems */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); + printk(KERN_ERR "the board updated to latest revisions.\n"); + printk(KERN_ERR "This software will not work reliably\n"); + printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + return 1; + } + + db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; + db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; + db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; + db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; + db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; + db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; + return 0; +} + static int __init db1200_dev_init(void) { unsigned long pfc; unsigned short sw; - int swapped; + int swapped, bid; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + if (pb1200_res_fixup()) + return -ENODEV; + } /* GPIO7 is low-level triggered CPLD cascade */ - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); /* insert/eject pairs: one of both is always screaming. To avoid @@ -626,6 +827,7 @@ static int __init db1200_dev_init(void) /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + * or S12 on the PB1200. */ /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however @@ -640,7 +842,7 @@ static int __init db1200_dev_init(void) gpio_request(215, "otg-vbus"); gpio_direction_output(215, 1); - printk(KERN_INFO "DB1200 device configuration:\n"); + printk(KERN_INFO "%s device configuration:\n", board_type_str()); sw = bcsr_read(BCSR_SWITCHES); if (sw & BCSR_SWITCHES_DIP_8) { @@ -707,6 +909,13 @@ static int __init db1200_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; db1x_register_norflash(64 << 20, 2, swapped); - return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); + platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); + + /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) + platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); + + return 0; } device_initcall(db1200_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200.c b/arch/mips/alchemy/devboards/pb1200.c deleted file mode 100644 index a2676c95053b..000000000000 --- a/arch/mips/alchemy/devboards/pb1200.c +++ /dev/null @@ -1,471 +0,0 @@ -/* - * Pb1200/DBAu1200 board platform device registration - * - * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/smc91x.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1100_mmc.h> -#include <asm/mach-au1x00/au1200fb.h> -#include <asm/mach-au1x00/au1xxx_dbdma.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-pb1x00/pb1200.h> -#include <prom.h> -#include "platform.h" - - -const char *get_system_type(void) -{ - return "PB1200"; -} - -void __init board_setup(void) -{ - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); - bcsr_init(PB1200_BCSR_PHYS_ADDR, - PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); -#endif - au_sync(); -} - -/******************************************************************************/ - -static int mmc_activity; - -static void pb1200mmc0_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); - - msleep(1); -} - -static int pb1200mmc0_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; -} - -static int pb1200mmc0_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; -} - -static void pb1200_mmcled_set(struct led_classdev *led, - enum led_brightness brightness) -{ - if (brightness != LED_OFF) { - if (++mmc_activity == 1) - bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); - } else { - if (--mmc_activity == 0) - bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); - } -} - -static struct led_classdev pb1200mmc_led = { - .brightness_set = pb1200_mmcled_set, -}; - -static void pb1200mmc1_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); - - msleep(1); -} - -static int pb1200mmc1_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; -} - -static int pb1200mmc1_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; -} - -static struct au1xmmc_platform_data pb1200mmc_platdata[2] = { - [0] = { - .set_power = pb1200mmc0_set_power, - .card_inserted = pb1200mmc0_card_inserted, - .card_readonly = pb1200mmc0_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, - [1] = { - .set_power = pb1200mmc1_set_power, - .card_inserted = pb1200mmc1_card_inserted, - .card_readonly = pb1200mmc1_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, -}; - -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); - -static struct resource au1200_mmc0_res[] = { - [0] = { - .start = AU1100_SD0_PHYS_ADDR, - .end = AU1100_SD0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX0, - .end = AU1200_DSCR_CMD0_SDMS_TX0, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX0, - .end = AU1200_DSCR_CMD0_SDMS_RX0, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc0_dev = { - .name = "au1xxx-mmc", - .id = 0, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[0], - }, - .num_resources = ARRAY_SIZE(au1200_mmc0_res), - .resource = au1200_mmc0_res, -}; - -static struct resource au1200_mmc1_res[] = { - [0] = { - .start = AU1100_SD1_PHYS_ADDR, - .end = AU1100_SD1_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX1, - .end = AU1200_DSCR_CMD0_SDMS_TX1, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX1, - .end = AU1200_DSCR_CMD0_SDMS_RX1, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc1_dev = { - .name = "au1xxx-mmc", - .id = 1, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[1], - }, - .num_resources = ARRAY_SIZE(au1200_mmc1_res), - .resource = au1200_mmc1_res, -}; - - -static struct resource ide_resources[] = { - [0] = { - .start = IDE_PHYS_ADDR, - .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IDE_INT, - .end = IDE_INT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = AU1200_DSCR_CMD0_DMA_REQ1, - .end = AU1200_DSCR_CMD0_DMA_REQ1, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ide_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &au1200_ide_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ide_resources), - .resource = ide_resources -}; - -static struct smc91x_platdata smc_data = { - .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91c111_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SMC91C111_PHYS_ADDR, - .end = SMC91C111_PHYS_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = SMC91C111_INT, - .end = SMC91C111_INT, - .flags = IORESOURCE_IRQ - }, -}; - -static struct platform_device smc91c111_device = { - .dev = { - .platform_data = &smc_data, - }, - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91c111_resources), - .resource = smc91c111_resources -}; - -static struct resource au1200_psc0_res[] = { - [0] = { - .start = AU1550_PSC0_PHYS_ADDR, - .end = AU1550_PSC0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_PSC0_INT, - .end = AU1200_PSC0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_PSC0_TX, - .end = AU1200_DSCR_CMD0_PSC0_TX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_PSC0_RX, - .end = AU1200_DSCR_CMD0_PSC0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device pb1200_i2c_dev = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(au1200_psc0_res), - .resource = au1200_psc0_res, -}; - -static int pb1200fb_panel_index(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -static int pb1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - return 0; -} - -static int pb1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - return 0; -} - -static struct au1200fb_platdata pb1200fb_pd = { - .panel_index = pb1200fb_panel_index, - .panel_init = pb1200fb_panel_init, - .panel_shutdown = pb1200fb_panel_shutdown, -}; - -static struct resource au1200_lcd_res[] = { - [0] = { - .start = AU1200_LCD_PHYS_ADDR, - .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_LCD_INT, - .end = AU1200_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device pb1200_lcd_dev = { - .name = "au1200-lcd", - .id = 0, - .dev = { - .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200fb_pd, - }, - .num_resources = ARRAY_SIZE(au1200_lcd_res), - .resource = au1200_lcd_res, -}; - -static struct platform_device *board_platform_devices[] __initdata = { - &ide_device, - &smc91c111_device, - &pb1200_i2c_dev, - &pb1200_mmc0_dev, - &pb1200_mmc1_dev, - &pb1200_lcd_dev, -}; - -static int __init board_register_devices(void) -{ - int swapped; - - /* We have a problem with CPLD rev 3. */ - if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } - - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - PB1200_PC0_INT, PB1200_PC0_INSERT_INT, - /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - PB1200_PC1_INT, PB1200_PC1_INSERT_INT, - /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1); - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; - db1x_register_norflash(128 * 1024 * 1024, 2, swapped); - - return platform_add_devices(board_platform_devices, - ARRAY_SIZE(board_platform_devices)); -} -device_initcall(board_register_devices); diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig deleted file mode 100644 index dcbe2704e5ed..000000000000 --- a/arch/mips/configs/pb1200_defconfig +++ /dev/null @@ -1,170 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_PB1200=y -CONFIG_KSM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-pb1200" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_UB=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_PROC_FS is not set -CONFIG_BLK_DEV_IDE_AU1XXX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_AU1550=y -CONFIG_SPI=y -CONFIG_SPI_AU1550=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_SENSORS_ADM1025=y -CONFIG_SENSORS_LM70=y -CONFIG_FB=y -CONFIG_FB_AU1200=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_AU1XPSC=y -CONFIG_SND_SOC_DB1200=y -CONFIG_HIDRAW=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_HCD=y -CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AU1X=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_VFAT_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 7a39657108c4..b2a8319521e5 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -43,15 +43,20 @@ #define BCSR_INT_PC1EJECT 0x0800 #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 -#define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_ADDR 0x18800000 #define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) #define DB1200_ETH_PHYS_ADDR 0x19000300 #define DB1200_NAND_PHYS_ADDR 0x20000000 +#define PB1200_IDE_PHYS_ADDR 0x0C800000 +#define PB1200_ETH_PHYS_ADDR 0x0D000300 +#define PB1200_NAND_PHYS_ADDR 0x1C000000 + /* * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking @@ -77,6 +82,8 @@ enum external_db1200_ints { DB1200_PC1_EJECT_INT, DB1200_SD0_INSERT_INT, DB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, DB1200_INT_END = DB1200_INT_BEGIN + 15, }; diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h deleted file mode 100644 index 374416adb65b..000000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * AMD Alchemy Pb1200 Reference Board - * Board Registers defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1200_H -#define __ASM_PB1200_H - -#include <linux/types.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_psc.h> - -#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR -/* - * AC97 and I2S are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR - - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 -#define BCSR_INT_SD1INSERT 0x4000 -#define BCSR_INT_SD1EJECT 0x8000 - -#define SMC91C111_PHYS_ADDR 0x0D000300 -#define SMC91C111_INT PB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x0C800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT PB1200_IDE_INT - -#define NAND_PHYS_ADDR 0x1C000000 - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an Au1200 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -/* - * External Interrupts for Pb1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the PB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - PB1200_IDE_INT = PB1200_INT_BEGIN, - PB1200_ETH_INT, - PB1200_PC0_INT, - PB1200_PC0_STSCHG_INT, - PB1200_PC1_INT, - PB1200_PC1_STSCHG_INT, - PB1200_DC_INT, - PB1200_FLASHBUSY_INT, - PB1200_PC0_INSERT_INT, - PB1200_PC0_EJECT_INT, - PB1200_PC1_INSERT_INT, - PB1200_PC1_EJECT_INT, - PB1200_SD0_INSERT_INT, - PB1200_SD0_EJECT_INT, - PB1200_SD1_INSERT_INT, - PB1200_SD1_EJECT_INT, - - PB1200_INT_END = PB1200_INT_BEGIN + 15 -}; - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_PB1200_H */ |
