diff options
62 files changed, 2423 insertions, 2193 deletions
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt new file mode 100644 index 000000000000..524c3dc5d808 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt @@ -0,0 +1,8 @@ +* Insignal's Exynos4210 based Origen evaluation board + +Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt new file mode 100644 index 000000000000..0bf68be56fd1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -0,0 +1,8 @@ +* Samsung's Exynos4210 based SMDKV310 evaluation board + +SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt new file mode 100644 index 000000000000..a4cd273b2a67 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt @@ -0,0 +1,30 @@ +* ARM PrimeCell PL330 DMA Controller + +The ARM PrimeCell PL330 DMA controller can move blocks of memory contents +between memory and peripherals or memory to memory. + +Required properties: + - compatible: should include both "arm,pl330" and "arm,primecell". + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + +Example: + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <99>; + }; + +Client drivers (device nodes requiring dma transfers from dev-to-mem or +mem-to-dev) should specify the DMA channel numbers using a two-value pair +as shown below. + + [property name] = <[phandle of the dma controller] [dma request id]>; + + where 'dma request id' is the dma request number which is connected + to the client controller. The 'property name' is recommended to be + of the form <name>-dma-channel. + + Example: tx-dma-channel = <&pdma0 12>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt new file mode 100644 index 000000000000..8f50fe5e6c42 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -0,0 +1,40 @@ +Samsung Exynos4 GPIO Controller + +Required properties: +- compatible: Compatible property value should be "samsung,exynos4-gpio>". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes + should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [pull up/down] + [drive strength]> + + Values for gpio specifier: + - Pin number: is a value between 0 to 7. + - Pull Up/Down: 0 - Pull Up/Down Disabled. + 1 - Pull Down Enabled. + 3 - Pull Up Enabled. + - Drive Strength: 0 - 1x, + 1 - 3x, + 2 - 2x, + 3 - 4x + +- gpio-controller: Specifies that the node is a gpio controller. +- #address-cells: should be 1. +- #size-cells: should be 1. + +Example: + + gpa0: gpio-controller@11400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt new file mode 100644 index 000000000000..ce3e394c0e64 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -0,0 +1,88 @@ +* Samsung's Keypad Controller device tree bindings + +Samsung's Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad + controller. + - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad + controller. + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. + +Required Board Specific Properties: +- samsung,keypad-num-rows: Number of row lines connected to the keypad + controller. + +- samsung,keypad-num-columns: Number of column lines connected to the + keypad controller. + +- row-gpios: List of gpios used as row lines. The gpio specifier for + this property depends on the gpio controller to which these row lines + are connected. + +- col-gpios: List of gpios used as column lines. The gpio specifier for + this property depends on the gpio controller to which these column + lines are connected. + +- Keys represented as child nodes: Each key connected to the keypad + controller is represented as a child node to the keypad controller + device node and should include the following properties. + - keypad,row: the row number to which the key is connected. + - keypad,column: the column number to which the key is connected. + - linux,code: the key-code to be reported when the key is pressed + and released. + +Optional Properties specific to linux: +- linux,keypad-no-autorepeat: do no enable autorepeat feature. +- linux,keypad-wakeup: use any event on keypad as wakeup event. + + +Example: + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <173>; + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + linux,input-wakeup; + + row-gpios = <&gpx2 0 3 3 0 + &gpx2 1 3 3 0>; + + col-gpios = <&gpx1 0 3 0 0 + &gpx1 1 3 0 0 + &gpx1 2 3 0 0 + &gpx1 3 3 0 0 + &gpx1 4 3 0 0 + &gpx1 5 3 0 0 + &gpx1 6 3 0 0 + &gpx1 7 3 0 0>; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt new file mode 100644 index 000000000000..90ec45fd33ec --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -0,0 +1,20 @@ +* Samsung's S3C Real Time Clock controller + +Required properties: +- compatible: should be one of the following. + * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc. + * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Two interrupt numbers to the cpu should be specified. First + interrupt number is the rtc alarm interupt and second interrupt number + is the rtc tick interrupt. The number of cells representing a interrupt + depends on the parent interrupt controller. + +Example: + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <44 0 45 0>; + }; diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt new file mode 100644 index 000000000000..2c8a17cf5cb5 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt @@ -0,0 +1,14 @@ +* Samsung's UART Controller + +The Samsung's UART controller is used for interfacing SoC with serial communicaion +devices. + +Required properties: +- compatible: should be + - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports. + +- reg: base physical address of the controller and length of memory mapped + region. + +- interrupts: interrupt number to the cpu. The interrupt specifier format depends + on the interrupt controller parent. diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts new file mode 100644 index 000000000000..b8c476384eef --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -0,0 +1,137 @@ +/* + * Samsung's Exynos4210 based Origen board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Insignal's Origen board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4210"; + compatible = "insignal,origen", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + sdhci@12510000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk0 2 2 3 3>; + gpios = <&gpk0 0 2 0 3>, + <&gpk0 1 2 0 3>, + <&gpk0 3 2 3 3>, + <&gpk0 4 2 3 3>, + <&gpk0 5 2 3 3>, + <&gpk0 6 2 3 3>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + up { + label = "Up"; + gpios = <&gpx2 0 0 0 2>; + linux,code = <103>; + }; + + down { + label = "Down"; + gpios = <&gpx2 1 0 0 2>; + linux,code = <108>; + }; + + back { + label = "Back"; + gpios = <&gpx1 7 0 0 2>; + linux,code = <158>; + }; + + home { + label = "Home"; + gpios = <&gpx1 6 0 0 2>; + linux,code = <102>; + }; + + menu { + label = "Menu"; + gpios = <&gpx1 5 0 0 2>; + linux,code = <139>; + }; + }; + + keypad@100A0000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13860000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts new file mode 100644 index 000000000000..27afc8e535ca --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -0,0 +1,182 @@ +/* + * Samsung's Exynos4210 based SMDKV310 board device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Device tree source file for Samsung's SMDKV310 board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung smdkv310 evaluation board based on Exynos4210"; + compatible = "samsung,smdkv310", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + sdhci@12530000 { + samsung,sdhci-bus-width = <4>; + linux,mmc_cap_4_bit_data; + samsung,sdhci-cd-internal; + gpio-cd = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, + <&gpk2 1 2 0 3>, + <&gpk2 3 2 3 3>, + <&gpk2 4 2 3 3>, + <&gpk2 5 2 3 3>, + <&gpk2 6 2 3 3>; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + + row-gpios = <&gpx2 0 3 3 0>, + <&gpx2 1 3 3 0>; + + col-gpios = <&gpx1 0 3 0 0>, + <&gpx1 1 3 0 0>, + <&gpx1 2 3 0 0>, + <&gpx1 3 3 0 0>, + <&gpx1 4 3 0 0>, + <&gpx1 5 3 0 0>, + <&gpx1 6 3 0 0>, + <&gpx1 7 3 0 0>; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_a { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <30>; + }; + + key_b { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <48>; + }; + + key_c { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_d { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <32>; + }; + + key_e { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <18>; + }; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + gpios = <&gpd1 0 2 3 0>, + <&gpd1 1 2 3 0>; + + eeprom@50 { + compatible = "samsung,24ad0xd1"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "samsung,24ad0xd1"; + reg = <0x52>; + }; + }; + + sdhci@12510000 { + status = "disabled"; + }; + + sdhci@12520000 { + status = "disabled"; + }; + + sdhci@12540000 { + status = "disabled"; + }; + + i2c@13870000 { + status = "disabled"; + }; + + i2c@13880000 { + status = "disabled"; + }; + + i2c@13890000 { + status = "disabled"; + }; + + i2c@138A0000 { + status = "disabled"; + }; + + i2c@138B0000 { + status = "disabled"; + }; + + i2c@138C0000 { + status = "disabled"; + }; + + i2c@138D0000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi new file mode 100644 index 000000000000..63d7578856c1 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -0,0 +1,397 @@ +/* + * Samsung's Exynos4210 SoC device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos4210"; + interrupt-parent = <&gic>; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + watchdog@10060000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <0 43 0>; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 0>, <0 45 0>; + }; + + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <0 109 0>; + }; + + sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <0 73 0>; + }; + + sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <0 74 0>; + }; + + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + }; + + sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <0 76 0>; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 53 0>; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 55 0>; + }; + + i2c@13860000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@13870000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@13880000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@13890000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@138A0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@138B0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 63 0>; + }; + + i2c@138C0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 64 0>; + }; + + i2c@138D0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 65 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 35 0>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 36 0>; + }; + }; + + gpio-controllers { + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + ranges; + + gpa0: gpio-controller@11400000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400000 0x20>; + #gpio-cells = <4>; + }; + + gpa1: gpio-controller@11400020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400020 0x20>; + #gpio-cells = <4>; + }; + + gpb: gpio-controller@11400040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400040 0x20>; + #gpio-cells = <4>; + }; + + gpc0: gpio-controller@11400060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400060 0x20>; + #gpio-cells = <4>; + }; + + gpc1: gpio-controller@11400080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400080 0x20>; + #gpio-cells = <4>; + }; + + gpd0: gpio-controller@114000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000A0 0x20>; + #gpio-cells = <4>; + }; + + gpd1: gpio-controller@114000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000C0 0x20>; + #gpio-cells = <4>; + }; + + gpe0: gpio-controller@114000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114000E0 0x20>; + #gpio-cells = <4>; + }; + + gpe1: gpio-controller@11400100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400100 0x20>; + #gpio-cells = <4>; + }; + + gpe2: gpio-controller@11400120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400120 0x20>; + #gpio-cells = <4>; + }; + + gpe3: gpio-controller@11400140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400140 0x20>; + #gpio-cells = <4>; + }; + + gpe4: gpio-controller@11400160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400160 0x20>; + #gpio-cells = <4>; + }; + + gpf0: gpio-controller@11400180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11400180 0x20>; + #gpio-cells = <4>; + }; + + gpf1: gpio-controller@114001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001A0 0x20>; + #gpio-cells = <4>; + }; + + gpf2: gpio-controller@114001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001C0 0x20>; + #gpio-cells = <4>; + }; + + gpf3: gpio-controller@114001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x114001E0 0x20>; + #gpio-cells = <4>; + }; + + gpj0: gpio-controller@11000000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000000 0x20>; + #gpio-cells = <4>; + }; + + gpj1: gpio-controller@11000020 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000020 0x20>; + #gpio-cells = <4>; + }; + + gpk0: gpio-controller@11000040 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000040 0x20>; + #gpio-cells = <4>; + }; + + gpk1: gpio-controller@11000060 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000060 0x20>; + #gpio-cells = <4>; + }; + + gpk2: gpio-controller@11000080 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000080 0x20>; + #gpio-cells = <4>; + }; + + gpk3: gpio-controller@110000A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000A0 0x20>; + #gpio-cells = <4>; + }; + + gpl0: gpio-controller@110000C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000C0 0x20>; + #gpio-cells = <4>; + }; + + gpl1: gpio-controller@110000E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110000E0 0x20>; + #gpio-cells = <4>; + }; + + gpl2: gpio-controller@11000100 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000100 0x20>; + #gpio-cells = <4>; + }; + + gpy0: gpio-controller@11000120 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000120 0x20>; + #gpio-cells = <4>; + }; + + gpy1: gpio-controller@11000140 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000140 0x20>; + #gpio-cells = <4>; + }; + + gpy2: gpio-controller@11000160 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000160 0x20>; + #gpio-cells = <4>; + }; + + gpy3: gpio-controller@11000180 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000180 0x20>; + #gpio-cells = <4>; + }; + + gpy4: gpio-controller@110001A0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001A0 0x20>; + #gpio-cells = <4>; + }; + + gpy5: gpio-controller@110001C0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001C0 0x20>; + #gpio-cells = <4>; + }; + + gpy6: gpio-controller@110001E0 { + compatible = "samsung,exynos4-gpio"; + reg = <0x110001E0 0x20>; + #gpio-cells = <4>; + }; + + gpx0: gpio-controller@11000C00 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C00 0x20>; + #gpio-cells = <4>; + }; + + gpx1: gpio-controller@11000C20 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C20 0x20>; + #gpio-cells = <4>; + }; + + gpx2: gpio-controller@11000C40 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C40 0x20>; + #gpio-cells = <4>; + }; + + gpx3: gpio-controller@11000C60 { + compatible = "samsung,exynos4-gpio"; + reg = <0x11000C60 0x20>; + #gpio-cells = <4>; + }; + + gpz: gpio-controller@03860000 { + compatible = "samsung,exynos4-gpio"; + reg = <0x03860000 0x20>; + #gpio-cells = <4>; + }; + }; +}; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f3560d..0afcc3b0f870 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -57,6 +57,11 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS4_DEV_DMA + bool + help + Compile in amba device definitions for DMA controller + config EXYNOS4_DEV_AHCI bool help @@ -177,6 +182,7 @@ config MACH_SMDKV310 select SAMSUNG_DEV_BACKLIGHT select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM select EXYNOS4_DEV_SYSMMU @@ -197,6 +203,7 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select EXYNOS4_DEV_AHCI + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI help @@ -222,6 +229,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -255,6 +263,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -287,6 +296,7 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI @@ -327,6 +337,20 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif +comment "Flattened Device Tree based board for Exynos4 based SoC" + +config MACH_EXYNOS4_DT + bool "Samsung Exynos4 Machine using device tree" + select CPU_EXYNOS4210 + select USE_OF + select ARM_AMBA + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the Exynos4 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + if ARCH_EXYNOS4 comment "Configuration for HSMMC 8-bit bus width" diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 59069a35e40b..8d85ae635ac2 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,7 +13,7 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o -obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o pmu.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o @@ -37,6 +37,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o + # device support obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o @@ -44,6 +46,7 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o +obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 2894f0adef5c..7dee8694486a 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -553,16 +553,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_dac_ctrl, .ctrlbit = (1 << 0), }, { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), - }, { .name = "adc", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), @@ -778,6 +768,20 @@ static struct clk init_clocks[] = { } }; +static struct clk clk_pdma0 = { + .name = "dma", + .devname = "dma-pl330.0", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), +}; + +static struct clk clk_pdma1 = { + .name = "dma", + .devname = "dma-pl330.1", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), +}; + struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -1009,46 +1013,6 @@ static struct clksrc_clk clk_dout_mmc4 = { static struct clksrc_clk clksrcs[] = { { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, - }, { .clk = { .name = "sclk_pwm", .enable = exynos4_clksrc_mask_peril0_ctrl, @@ -1237,6 +1201,54 @@ static struct clksrc_clk clksrcs[] = { } }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.0", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.1", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.2", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "exynos4210-uart.3", + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1271,6 +1283,27 @@ static struct clksrc_clk *sysclks[] = { &clk_mout_mfc1, }; +static struct clk *clk_cdev[] = { + &clk_pdma0, + &clk_pdma1, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, +}; + +static struct clk_lookup exynos4_clk_lookup[] = { + CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk), + CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk), + CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk), + CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), +}; + static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) @@ -1478,11 +1511,19 @@ void __init exynos4_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); + for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) + s3c_disable_clocks(clk_cdev[ptr], 1); + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); register_syscore_ops(&exynos4_clock_syscore_ops); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c index 90ec247f3b37..0eb7b6a6903d 100644 --- a/arch/arm/mach-exynos/cpu.c +++ b/arch/arm/mach-exynos/cpu.c @@ -10,6 +10,8 @@ #include <linux/sched.h> #include <linux/sysdev.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -218,13 +220,26 @@ static void exynos4_gic_irq_fix_base(struct irq_data *d) (gic_bank_offset * smp_processor_id()); } +#ifdef CONFIG_OF +static const struct of_device_id exynos4_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; +#endif + void __init exynos4_init_irq(void) { int irq; gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + if (!of_have_populated_dt()) + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); +#ifdef CONFIG_OF + else + of_irq_init(exynos4_dt_irq_match); +#endif + gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 9667c61e64fb..b10fcd270f07 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -24,6 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/amba/bus.h> #include <linux/amba/pl330.h> +#include <linux/of.h> #include <asm/irq.h> #include <plat/devs.h> @@ -35,95 +36,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM2_RX, + DMACH_PCM2_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ2, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, }; struct dma_pl330_platdata exynos4_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device exynos4_device_pdma0 = { @@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[25] = { - { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SLIMBUS5_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ1, + DMACH_MSM_REQ3, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_I2S0S_TX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, }; struct dma_pl330_platdata exynos4_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device exynos4_device_pdma1 = { @@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = { static int __init exynos4_dma_init(void) { + if (of_have_populated_dt()) + return 0; + + dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); amba_device_register(&exynos4_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S index f5e9fd8e37b4..d7dfcd7eb921 100644 --- a/arch/arm/mach-exynos/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos/include/mach/entry-macro.S @@ -72,7 +72,6 @@ cmpcc \irqnr, \irqnr cmpne \irqnr, \tmp cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 .endm diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index dfd4b7eecb90..713dd5251c64 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -17,13 +17,13 @@ /* PPI: Private Peripheral Interrupt */ -#define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_PPI(x) (x+16) #define IRQ_MCT_LOCALTIMER IRQ_PPI(12) /* SPI: Shared Peripheral Interrupt */ -#define IRQ_SPI(x) S5P_IRQ(x+32) +#define IRQ_SPI(x) (x+32) #define IRQ_EINT0 IRQ_SPI(16) #define IRQ_EINT1 IRQ_SPI(17) @@ -163,7 +163,9 @@ #define IRQ_GPIO2_NR_GROUPS 9 #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) +#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END + 64) +#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c index a8a83e3881a4..5b35978029be 100644 --- a/arch/arm/mach-exynos/init.c +++ b/arch/arm/mach-exynos/init.c @@ -14,29 +14,14 @@ #include <plat/devs.h> #include <plat/regs-serial.h> -static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { - [0] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->has_fracval = 1; - tcfg->clocks = exynos4_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); - } - tcfg->flags |= NO_NEED_CHECK_CLKSRC; - } + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) + tcfg->has_fracval = 1; - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); + s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c new file mode 100644 index 000000000000..85fa02767d67 --- /dev/null +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's Exynos4210 flattened device tree enabled machine + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> +#include <plat/exynos4.h> + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the Exynos4 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), + "exynos4-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), + "exynos4-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), + "exynos4-sdhci.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), + "exynos4-sdhci.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), + "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + {}, +}; + +static void __init exynos4210_dt_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos4210_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos4210_auxdata_lookup, NULL); +} + +static char const *exynos4210_dt_compat[] __initdata = { + "samsung,exynos4210", + NULL +}; + +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .init_irq = exynos4_init_irq, + .map_io = exynos4210_dt_map_io, + .init_machine = exynos4210_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos4210_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index a20ae1ad4062..71b955877793 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -164,22 +164,6 @@ static struct map_desc bast_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -187,8 +171,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -196,8 +178,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -206,8 +186,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index df47e8e90065..0f0a9a1795e9 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -109,23 +109,6 @@ static struct map_desc vr1000_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -/* uart clock source(s) */ - -static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0. - } -}; - static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -133,8 +116,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, [1] = { .hwport = 1, @@ -142,8 +123,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -152,9 +131,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = vr1000_serial_clocks, - .clocks_size = ARRAY_SIZE(vr1000_serial_clocks), - } }; diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 3d7ebc557a72..af74927bca14 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -123,12 +123,18 @@ static struct clk s3c2410_armclk = { .id = -1, }; +static struct clk_lookup s3c2410_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), +}; + void __init s3c2410_init_clocks(int xtal) { s3c24xx_register_baseclocks(xtal); s3c2410_setup_clocks(); s3c2410_baseclk_add(); s3c24xx_register_clock(&s3c2410_armclk); + clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); } struct sysdev_class s3c2410_sysclass = { diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 140711db6c89..cd50291931f7 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -659,6 +659,12 @@ static struct clk *clks[] __initdata = { &clk_armclk, }; +static struct clk_lookup s3c2412_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), +}; + int __init s3c2412_baseclk_add(void) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); @@ -751,6 +757,7 @@ int __init s3c2412_baseclk_add(void) s3c2412_clkcon_enable(clkp, 0); } + clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); s3c_pwmclk_init(); return 0; } diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index f9e6bdaf41d2..c9879af42b08 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -34,6 +34,7 @@ #include <linux/mutex.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/serial_core.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,6 +44,7 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <plat/regs-serial.h> /* S3C2440 extended clock support */ @@ -108,6 +110,46 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_CAMERA, }; +static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) +{ + unsigned long ucon0, ucon1, ucon2, divisor; + + /* the fun of calculating the uart divisors on the s3c2440 */ + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) + divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; + else if (ucon1 != 0) + divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; + else if (ucon2 != 0) + divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; + else + /* manual calims 44, seems to be 9 */ + divisor = 9; + + return clk_get_rate(clk->parent) / divisor; +} + +static struct clk s3c2440_clk_fclk_n = { + .name = "fclk_n", + .parent = &clk_f, + .ops = &(struct clk_ops) { + .get_rate = s3c2440_fclk_n_getrate, + }, +}; + +static struct clk_lookup s3c2440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), +}; + static int s3c2440_clk_add(struct sys_device *sysdev) { struct clk *clock_upll; @@ -126,10 +168,12 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c2440_clk_cam.parent = clock_h; s3c2440_clk_ac97.parent = clock_p; s3c2440_clk_cam_upll.parent = clock_upll; + s3c24xx_register_clock(&s3c2440_clk_fclk_n); s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); s3c24xx_register_clock(&s3c2440_clk_cam_upll); + clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 74f92fc3fd04..d8f36c0a16ad 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -96,22 +96,6 @@ static struct map_desc anubis_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -119,8 +103,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 2, @@ -128,8 +111,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = anubis_serial_clocks, - .clocks_size = ARRAY_SIZE(anubis_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 38887ee0c784..aa86ca8fa1e9 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -57,22 +57,6 @@ static struct map_desc at2440evb_iodesc[] __initdata = { #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) -static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - - static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -80,8 +64,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -89,8 +72,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = at2440evb_serial_clocks, - .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index dc142ebf8cba..d7e47b2b6ec9 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -100,21 +100,6 @@ static struct map_desc osiris_iodesc[] __initdata = { #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE -static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { - [0] = { - .name = "uclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -122,8 +107,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [1] = { .hwport = 1, @@ -131,8 +115,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, }, [2] = { .hwport = 2, @@ -140,8 +123,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = { .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, - .clocks = osiris_serial_clocks, - .clocks_size = ARRAY_SIZE(osiris_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2, } }; diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 0d3453bf567c..4267cd56bfe7 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -68,15 +68,6 @@ static struct map_desc rx1950_iodesc[] __initdata = { }; -static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0x0a, - .min_baud = 0, - .max_baud = 0, - }, -}; - static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { [0] = { .hwport = 0, @@ -84,8 +75,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -93,8 +83,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -103,8 +92,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0xf1, - .clocks = rx1950_serial_clocks, - .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, }; diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index e19499c2f909..3d5e2e67971e 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -67,16 +67,6 @@ static struct map_desc rx3715_iodesc[] __initdata = { }, }; - -static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = { - [0] = { - .name = "fclk", - .divisor = 0, - .min_baud = 0, - .max_baud = 0, - } -}; - static struct s3c2410_uartcfg rx3715_uartcfgs[] = { [0] = { .hwport = 0, @@ -84,8 +74,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, [1] = { .hwport = 1, @@ -93,8 +82,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x03, .ufcon = 0x00, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, }, /* IR port */ [2] = { @@ -103,8 +91,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { .ucon = 0x3c5, .ulcon = 0x43, .ufcon = 0x51, - .clocks = rx3715_serial_clocks, - .clocks_size = ARRAY_SIZE(rx3715_serial_clocks), + .clk_sel = S3C2410_UCON_CLKSEL3, } }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 39c238d7a3dc..2addd988141c 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -617,16 +617,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_uhost, }, { .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, - }, { -/* Where does UCLK0 come from? */ - .clk = { .name = "spi-bus", .devname = "s3c64xx-spi.0", .ctrlbit = S3C_CLKCON_SCLK_SPI0, @@ -695,6 +685,18 @@ static struct clksrc_clk clksrcs[] = { }, }; +/* Where does UCLK0 come from? */ +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, + .sources = &clkset_uart, +}; + /* Clock initialisation code */ static struct clksrc_clk *init_parents[] = { @@ -703,6 +705,15 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_mpll, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s3c64xx_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) void __init_or_cpufreq s3c6400_setup_clocks(void) @@ -811,6 +822,8 @@ static struct clk *clks[] __initdata = { void __init s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_divlimit) { + unsigned int cnt; + armclk_mask = armclk_divlimit; s3c24xx_register_baseclocks(xtal); @@ -823,5 +836,9 @@ void __init s3c64xx_register_clocks(unsigned long xtal, s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) + s3c_register_clksrc(clksrc_cdev[cnt], 1); + clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index c54c65d511f0..bfb1917ad0da 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -421,15 +421,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), @@ -487,6 +478,17 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -505,6 +507,15 @@ static struct clk dummy_apb_pclk = { .id = -1, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s5p6440_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -583,9 +594,12 @@ void __init s5p6440_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 2d04abfba12e..d132638c7b23 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -443,15 +443,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), @@ -536,6 +527,26 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uclk = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uclk, +}; + +static struct clk_lookup s5p6450_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -634,9 +645,12 @@ void __init s5p6450_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 442dd4ad12da..f820c0744405 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -38,176 +38,74 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri s5p6440_pdma_peri[22] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, +u8 s5p6440_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, }; struct dma_pl330_platdata s5p6440_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), - .peri = s5p6440_pdma_peri, + .peri_id = s5p6440_pdma_peri, }; -struct dma_pl330_peri s5p6450_pdma_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART4_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART4_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_USI_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_USI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_UART5_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART5_TX, - .rqtype = MEMTODEV, - }, +u8 s5p6450_pdma_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_TX, + DMACH_I2S0_RX, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_PCM1_TX, + DMACH_PCM1_RX, + DMACH_PCM2_TX, + DMACH_PCM2_RX, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_USI_TX, + DMACH_USI_RX, + DMACH_MAX, + DMACH_I2S1_TX, + DMACH_I2S1_RX, + DMACH_I2S2_TX, + DMACH_I2S2_RX, + DMACH_PWM, + DMACH_UART5_RX, + DMACH_UART5_TX, }; struct dma_pl330_platdata s5p6450_pdma_pdata = { .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), - .peri = s5p6450_pdma_peri, + .peri_id = s5p6450_pdma_peri, }; struct amba_device s5p64x0_device_pdma = { @@ -227,10 +125,15 @@ struct amba_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - if (soc_is_s5p6450()) + if (soc_is_s5p6450()) { + dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; - else + } else { + dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + } amba_device_register(&s5p64x0_device_pdma, &iomem_resource); diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 53982db9d259..5b845e849b30 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -141,6 +141,8 @@ #define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) +#define IRQ_TIMER_BASE (11) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c index 79833caf8165..659a66c131a1 100644 --- a/arch/arm/mach-s5p64x0/init.c +++ b/arch/arm/mach-s5p64x0/init.c @@ -23,36 +23,7 @@ #include <plat/s5p6450.h> #include <plat/regs-serial.h> -static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ - -void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p64x0_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); - } - } -} - void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) { int uart; @@ -62,12 +33,10 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; } - s5p64x0_common_init_uarts(cfg, no); s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - s5p64x0_common_init_uarts(cfg, no); s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 8d47709da713..9d644ece2604 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -962,16 +962,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, }, { .clk = { - .name = "uclk1", - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_mixer", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1098,6 +1088,17 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart = { + .clk = { + .name = "uclk1", + .ctrlbit = (1 << 3), + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clk_src_group2, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1127,6 +1128,10 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_spdif, }; +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart, +}; + void __init_or_cpufreq s5pc100_setup_clocks(void) { unsigned long xtal; @@ -1266,6 +1271,11 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk1, }; +static struct clk_lookup s5pc100_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk), +}; + void __init s5pc100_register_clocks(void) { int ptr; @@ -1277,9 +1287,12 @@ void __init s5pc100_register_clocks(void) s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index 065a087f5a8b..c841f4d313f2 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -35,100 +35,42 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_EXTERNAL, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_HSI_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_HSI_TX, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, }; struct dma_pl330_platdata s5pc100_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pc100_device_pdma0 = { @@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[30] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_IRDA, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, }; struct dma_pl330_platdata s5pc100_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pc100_device_pdma1 = { @@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = { static int __init s5pc100_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index d2eb4757381f..2870f12c7926 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -97,6 +97,8 @@ #define IRQ_SDMFIQ S5P_IRQ_VIC2(31) #define IRQ_VIC_END S5P_IRQ_VIC2(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 4c5ac7a69e9e..43a045d354ec 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -809,46 +809,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, }, { .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 13), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 14), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 15), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, - }, { - .clk = { .name = "sclk_fimc", .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, @@ -1022,6 +982,61 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_uart0 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.0", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart1 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.1", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 13), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart2 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.2", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 14), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_uart3 = { + .clk = { + .name = "uclk1", + .devname = "s5pv210-uart.3", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 15), + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, +}; + +static struct clksrc_clk *clksrc_cdev[] = { + &clk_sclk_uart0, + &clk_sclk_uart1, + &clk_sclk_uart2, + &clk_sclk_uart3, +}; + /* Clock initialisation code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1261,6 +1276,14 @@ static struct clk *clks[] __initdata = { &clk_pcmcdclk2, }; +static struct clk_lookup s5pv210_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), + CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk), + CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk), + CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk), + CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk), +}; + void __init s5pv210_register_clocks(void) { int ptr; @@ -1273,11 +1296,15 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) s3c_register_clksrc(sclk_tv[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) + s3c_register_clksrc(clksrc_cdev[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup)); s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86b749c18b77..a6113e0267f2 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -35,90 +35,40 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -struct dma_pl330_peri pdma0_peri[28] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_AC97_MICIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMIN, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_AC97_PCMOUT, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PWM, - }, { - .peri_id = (u8)DMACH_SPDIF, - .rqtype = MEMTODEV, - }, +u8 pdma0_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_MAX, + DMACH_PWM, + DMACH_SPDIF, }; struct dma_pl330_platdata s5pv210_pdma0_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri = pdma0_peri, + .peri_id = pdma0_peri, }; struct amba_device s5pv210_device_pdma0 = { @@ -137,102 +87,44 @@ struct amba_device s5pv210_device_pdma0 = { .periphid = 0x00041330, }; -struct dma_pl330_peri pdma1_peri[32] = { - { - .peri_id = (u8)DMACH_UART0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_UART3_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_UART3_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = DMACH_MAX, - }, { - .peri_id = (u8)DMACH_I2S0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S0S_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_I2S2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_I2S2_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_SPI1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_SPI1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_MAX, - }, { - .peri_id = (u8)DMACH_PCM0_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM0_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_PCM1_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM1_TX, - .rqtype = MEMTODEV, - }, { - .peri_id = (u8)DMACH_MSM_REQ0, - }, { - .peri_id = (u8)DMACH_MSM_REQ1, - }, { - .peri_id = (u8)DMACH_MSM_REQ2, - }, { - .peri_id = (u8)DMACH_MSM_REQ3, - }, { - .peri_id = (u8)DMACH_PCM2_RX, - .rqtype = DEVTOMEM, - }, { - .peri_id = (u8)DMACH_PCM2_TX, - .rqtype = MEMTODEV, - }, +u8 pdma1_peri[] = { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_MAX, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_MAX, + DMACH_MAX, + DMACH_PCM0_RX, + DMACH_PCM0_TX, + DMACH_PCM1_RX, + DMACH_PCM1_TX, + DMACH_MSM_REQ0, + DMACH_MSM_REQ1, + DMACH_MSM_REQ2, + DMACH_MSM_REQ3, + DMACH_PCM2_RX, + DMACH_PCM2_TX, }; struct dma_pl330_platdata s5pv210_pdma1_pdata = { .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri = pdma1_peri, + .peri_id = pdma1_peri, }; struct amba_device s5pv210_device_pdma1 = { @@ -253,7 +145,12 @@ struct amba_device s5pv210_device_pdma1 = { static int __init s5pv210_dma_init(void) { + dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + + dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); + dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 5e0de3a31f3d..e777e010ed2e 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,6 +118,8 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) +#define IRQ_TIMER_BASE (11) + #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c index 4865ae2c475a..468a5f886193 100644 --- a/arch/arm/mach-s5pv210/init.c +++ b/arch/arm/mach-s5pv210/init.c @@ -18,27 +18,8 @@ #include <plat/s5pv210.h> #include <plat/regs-serial.h> -static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - /* uart registration process */ void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5pv210_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks); - } - } - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 5a21b15b2a97..4eab2cca2d92 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -297,13 +297,6 @@ static struct clksrc_clk clk_usb_bus_host = { static struct clksrc_clk clksrc_clks[] = { { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, - }, { /* camera interface bus-clock, divided down from esysclk */ .clk = { .name = "camif-upll", /* same as 2440 name */ @@ -323,6 +316,15 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clksrc_clk clk_esys_uart = { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, +}; + static struct clk clk_i2s_ext = { .name = "i2s-ext", }; @@ -589,6 +591,12 @@ static struct clksrc_clk *clksrcs[] __initdata = { &clk_arm, }; +static struct clk_lookup s3c2443_clk_lookup[] = { + CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), + CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), + CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), +}; + void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, unsigned int *divs, int nr_divs, int divmask) @@ -618,6 +626,7 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, /* See s3c2443/etc notes on disabling clocks at init time */ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); s3c2443_common_setup_clocks(get_mpll); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 93a994a5dd8f..2cded872f22b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -18,23 +18,24 @@ #include <mach/dma.h> -static inline bool pl330_filter(struct dma_chan *chan, void *param) -{ - struct dma_pl330_peri *peri = chan->private; - return peri->peri_id == (unsigned)param; -} - static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct samsung_dma_info *info) { struct dma_chan *chan; dma_cap_mask_t mask; struct dma_slave_config slave_config; + void *filter_param; dma_cap_zero(mask); dma_cap_set(info->cap, mask); - chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch); + /* + * If a dma channel property of a device node from device tree is + * specified, use that as the fliter parameter. + */ + filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop : + (void *)dma_ch; + chan = dma_request_channel(mask, pl330_filter, filter_param); if (info->direction == DMA_FROM_DEVICE) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 4c1a363526cf..22eafc310bd7 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -31,6 +31,7 @@ struct samsung_dma_info { enum dma_slave_buswidth width; dma_addr_t fifo; struct s3c2410_dma_client *client; + struct property *dt_dmach_prop; }; struct samsung_dma_ops { diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index 2e55e5958674..c5eaad529de5 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,8 @@ * use these just as IDs. */ enum dma_ch { - DMACH_UART0_RX, + DMACH_DT_PROP = -1, + DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, DMACH_UART1_TX, diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index 08d1a7ef97b7..df46b776976a 100644 --- a/arch/arm/plat-samsung/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -44,13 +44,14 @@ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) -#define S5P_TIMER_IRQ(x) (11 + (x)) +#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x)) #define IRQ_TIMER0 S5P_TIMER_IRQ(0) #define IRQ_TIMER1 S5P_TIMER_IRQ(1) #define IRQ_TIMER2 S5P_TIMER_IRQ(2) #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_TIMER_COUNT (5) #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ : ((x) - 16 + S5P_EINT_BASE2)) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 720734847027..29c26a818842 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -71,6 +71,7 @@ #define S3C2410_LCON_IRM (1<<6) #define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_CLKSHIFT (10) #define S3C2440_UCON_PCLK (0<<10) #define S3C2440_UCON_UCLK (1<<10) #define S3C2440_UCON_PCLK2 (2<<10) @@ -78,6 +79,7 @@ #define S3C2443_UCON_EPLL (3<<10) #define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_CLKSHIFT (10) #define S3C6400_UCON_PCLK (0<<10) #define S3C6400_UCON_PCLK2 (2<<10) #define S3C6400_UCON_UCLK0 (1<<10) @@ -90,11 +92,14 @@ #define S3C2440_UCON_DIVSHIFT (12) #define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_CLKSHIFT (10) #define S3C2412_UCON_UCLK (1<<10) #define S3C2412_UCON_USYSCLK (3<<10) #define S3C2412_UCON_PCLK (0<<10) #define S3C2412_UCON_PCLK2 (2<<10) +#define S3C2410_UCON_CLKMASK (1 << 10) +#define S3C2410_UCON_CLKSHIFT (10) #define S3C2410_UCON_UCLK (1<<10) #define S3C2410_UCON_SBREAK (1<<4) @@ -193,6 +198,7 @@ /* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_CLKSHIFT (10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) @@ -221,29 +227,24 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) -#define NO_NEED_CHECK_CLKSRC 1 +#define S3C2410_UCON_CLKSEL0 (1 << 0) +#define S3C2410_UCON_CLKSEL1 (1 << 1) +#define S3C2410_UCON_CLKSEL2 (1 << 2) +#define S3C2410_UCON_CLKSEL3 (1 << 3) -#ifndef __ASSEMBLY__ +/* Default values for s5pv210 UCON and UFCON uart registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) -/* struct s3c24xx_uart_clksrc - * - * this structure defines a named clock source that can be used for the - * uart, so that the best clock can be selected for the requested baud - * rate. - * - * min_baud and max_baud define the range of baud-rates this clock is - * acceptable for, if they are both zero, it is assumed any baud rate that - * can be generated from this clock will be used. - * - * divisor gives the divisor from the clock to the one seen by the uart -*/ +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) -struct s3c24xx_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; +#ifndef __ASSEMBLY__ /* configuration structure for per-machine configurations for the * serial port @@ -257,15 +258,13 @@ struct s3c2410_uartcfg { unsigned char unused; unsigned short flags; upf_t uart_flags; /* default uart flags */ + unsigned int clk_sel; unsigned int has_fracval; unsigned long ucon; /* value of ucon for port */ unsigned long ulcon; /* value of ulcon for port */ unsigned long ufcon; /* value of ufcon for port */ - - struct s3c24xx_uart_clksrc *clocks; - unsigned int clocks_size; }; /* s3c24xx_uart_devs diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 571041477ab2..a626e15799a5 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -19,6 +19,7 @@ #include <linux/amba/pl330.h> #include <linux/pm_runtime.h> #include <linux/scatterlist.h> +#include <linux/of.h> #define NR_DEFAULT_DESC 16 @@ -116,6 +117,9 @@ struct dma_pl330_desc { struct dma_pl330_chan *pchan; }; +/* forward declaration */ +static struct amba_driver pl330_driver; + static inline struct dma_pl330_chan * to_pchan(struct dma_chan *ch) { @@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err) tasklet_schedule(&pch->task); } +bool pl330_filter(struct dma_chan *chan, void *param) +{ + u8 *peri_id; + + if (chan->device->dev->driver != &pl330_driver.drv) + return false; + +#ifdef CONFIG_OF + if (chan->device->dev->of_node) { + const __be32 *prop_value; + phandle phandle; + struct device_node *node; + + prop_value = ((struct property *)param)->value; + phandle = be32_to_cpup(prop_value++); + node = of_find_node_by_phandle(phandle); + return ((chan->private == node) && + (chan->chan_id == be32_to_cpup(prop_value))); + } +#endif + + peri_id = chan->private; + return *peri_id == (unsigned)param; +} +EXPORT_SYMBOL(pl330_filter); + static int pl330_alloc_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); @@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac) static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) { struct dma_pl330_dmac *pdmac = pch->dmac; - struct dma_pl330_peri *peri = pch->chan.private; + u8 *peri_id = pch->chan.private; struct dma_pl330_desc *desc; /* Pluck one desc from the pool of DMAC */ @@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) desc->txd.cookie = 0; async_tx_ack(&desc->txd); - if (peri) { - desc->req.rqtype = peri->rqtype; - desc->req.peri = pch->chan.chan_id; - } else { - desc->req.rqtype = MEMTOMEM; - desc->req.peri = 0; - } + desc->req.peri = peri_id ? pch->chan.chan_id : 0; dma_async_tx_descriptor_init(&desc->txd, &pch->chan); @@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( case DMA_TO_DEVICE: desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; src = dma_addr; dst = pch->fifo_addr; break; case DMA_FROM_DEVICE: desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; src = pch->fifo_addr; dst = dma_addr; break; @@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct pl330_info *pi; int burst; if (unlikely(!pch || !len)) return NULL; - if (peri && peri->rqtype != MEMTOMEM) - return NULL; - pi = &pch->dmac->pif; desc = __pl330_prep_dma_memcpy(pch, dst, src, len); @@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = MEMTOMEM; /* Select max possible burst size */ burst = pi->pcfg.data_bus_width / 8; @@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, { struct dma_pl330_desc *first, *desc = NULL; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; int i; dma_addr_t addr; - if (unlikely(!pch || !sgl || !sg_len || !peri)) + if (unlikely(!pch || !sgl || !sg_len)) return NULL; - /* Make sure the direction is consistent */ - if ((direction == DMA_TO_DEVICE && - peri->rqtype != MEMTODEV) || - (direction == DMA_FROM_DEVICE && - peri->rqtype != DEVTOMEM)) { - dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n", - __func__, __LINE__); - return NULL; - } - addr = pch->fifo_addr; first = NULL; @@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (direction == DMA_TO_DEVICE) { desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; + desc->req.rqtype = MEMTODEV; fill_px(&desc->px, addr, sg_dma_address(sg), sg_dma_len(sg)); } else { desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; + desc->req.rqtype = DEVTOMEM; fill_px(&desc->px, sg_dma_address(sg), addr, sg_dma_len(sg)); } @@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan); + num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, + (u8)pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; - if (pdat) { - struct dma_pl330_peri *peri = &pdat->peri[i]; - - switch (peri->rqtype) { - case MEMTOMEM: - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - break; - case MEMTODEV: - case DEVTOMEM: - dma_cap_set(DMA_SLAVE, pd->cap_mask); - dma_cap_set(DMA_CYCLIC, pd->cap_mask); - break; - default: - dev_err(&adev->dev, "DEVTODEV Not Supported\n"); - continue; - } - pch->chan.private = peri; - } else { - dma_cap_set(DMA_MEMCPY, pd->cap_mask); - pch->chan.private = NULL; - } + if (!adev->dev.of_node) + pch->chan.private = pdat ? &pdat->peri_id[i] : NULL; + else + pch->chan.private = adev->dev.of_node; INIT_LIST_HEAD(&pch->work_list); spin_lock_init(&pch->lock); @@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) } pd->dev = &adev->dev; + if (pdat) { + pd->cap_mask = pdat->cap_mask; + } else { + dma_cap_set(DMA_MEMCPY, pd->cap_mask); + if (pi->pcfg.num_peri) { + dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); + } + } pd->device_alloc_chan_resources = pl330_alloc_chan_resources; pd->device_free_chan_resources = pl330_free_chan_resources; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 866251852719..6b4d23fd158e 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -24,6 +24,9 @@ #include <linux/interrupt.h> #include <linux/sysdev.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/of_address.h> #include <asm/irq.h> @@ -2374,6 +2377,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { #endif }; +#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) +static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np, + const void *gpio_spec, u32 *flags) +{ + const __be32 *gpio = gpio_spec; + const u32 n = be32_to_cpup(gpio); + unsigned int pin = gc->base + be32_to_cpu(gpio[0]); + + if (WARN_ON(gc->of_gpio_n_cells < 4)) + return -EINVAL; + + if (n > gc->ngpio) + return -EINVAL; + + if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])))) + pr_warn("gpio_xlate: failed to set pin function\n"); + if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]))) + pr_warn("gpio_xlate: failed to set pin pull up/down\n"); + if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]))) + pr_warn("gpio_xlate: failed to set pin drive strength\n"); + + return n; +} + +static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { + { .compatible = "samsung,exynos4-gpio", }, + {} +}; + +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + struct gpio_chip *gc = &chip->chip; + u64 address; + + if (!of_have_populated_dt()) + return; + + address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; + gc->of_node = of_find_matching_node_by_address(NULL, + exynos4_gpio_dt_match, address); + if (!gc->of_node) { + pr_info("gpio: device tree node not found for gpio controller" + " with base address %08llx\n", address); + return; + } + gc->of_gpio_n_cells = 4; + gc->of_xlate = exynos4_gpio_xlate; +} +#elif defined(CONFIG_ARCH_EXYNOS4) +static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + return; +} +#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */ + /* TODO: cleanup soc_is_* */ static __init int samsung_gpiolib_init(void) { @@ -2455,6 +2515,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO1, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); @@ -2467,6 +2531,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO2, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); @@ -2479,6 +2547,10 @@ static __init int samsung_gpiolib_init(void) chip->config = &exynos4_gpio_cfg; chip->group = group++; } +#ifdef CONFIG_CPU_EXYNOS4210 + exynos4_gpiolib_attach_ofnode(chip, + EXYNOS4_PA_GPIO3, i * 0x20); +#endif } samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index f689f49e3109..8a0060cd3982 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -21,6 +21,8 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/sched.h> #include <plat/keypad.h> @@ -68,31 +70,26 @@ struct samsung_keypad { wait_queue_head_t wait; bool stopped; int irq; + enum samsung_keypad_type type; unsigned int row_shift; unsigned int rows; unsigned int cols; unsigned int row_state[SAMSUNG_MAX_COLS]; +#ifdef CONFIG_OF + int row_gpios[SAMSUNG_MAX_ROWS]; + int col_gpios[SAMSUNG_MAX_COLS]; +#endif unsigned short keycodes[]; }; -static int samsung_keypad_is_s5pv210(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - enum samsung_keypad_type type = - platform_get_device_id(pdev)->driver_data; - - return type == KEYPAD_TYPE_S5PV210; -} - static void samsung_keypad_scan(struct samsung_keypad *keypad, unsigned int *row_state) { - struct device *dev = keypad->input_dev->dev.parent; unsigned int col; unsigned int val; for (col = 0; col < keypad->cols; col++) { - if (samsung_keypad_is_s5pv210(dev)) { + if (keypad->type == KEYPAD_TYPE_S5PV210) { val = S5PV210_KEYIFCOLEN_MASK; val &= ~(1 << col) << 8; } else { @@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev) samsung_keypad_stop(keypad); } +#ifdef CONFIG_OF +static struct samsung_keypad_platdata *samsung_keypad_parse_dt( + struct device *dev) +{ + struct samsung_keypad_platdata *pdata; + struct matrix_keymap_data *keymap_data; + uint32_t *keymap, num_rows = 0, num_cols = 0; + struct device_node *np = dev->of_node, *key_np; + unsigned int key_count = 0; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return NULL; + } + + of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows); + of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols); + if (!num_rows || !num_cols) { + dev_err(dev, "number of keypad rows/columns not specified\n"); + return NULL; + } + pdata->rows = num_rows; + pdata->cols = num_cols; + + keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL); + if (!keymap_data) { + dev_err(dev, "could not allocate memory for keymap data\n"); + return NULL; + } + pdata->keymap_data = keymap_data; + + for_each_child_of_node(np, key_np) + key_count++; + + keymap_data->keymap_size = key_count; + keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL); + if (!keymap) { + dev_err(dev, "could not allocate memory for keymap\n"); + return NULL; + } + keymap_data->keymap = keymap; + + for_each_child_of_node(np, key_np) { + u32 row, col, key_code; + of_property_read_u32(key_np, "keypad,row", &row); + of_property_read_u32(key_np, "keypad,column", &col); + of_property_read_u32(key_np, "linux,code", &key_code); + *keymap++ = KEY(row, col, key_code); + } + + if (of_get_property(np, "linux,input-no-autorepeat", NULL)) + pdata->no_autorepeat = true; + if (of_get_property(np, "linux,input-wakeup", NULL)) + pdata->wakeup = true; + + return pdata; +} + +static void samsung_keypad_parse_dt_gpio(struct device *dev, + struct samsung_keypad *keypad) +{ + struct device_node *np = dev->of_node; + int gpio, ret, row, col; + + for (row = 0; row < keypad->rows; row++) { + gpio = of_get_named_gpio(np, "row-gpios", row); + keypad->row_gpios[row] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad row[%d]: invalid gpio %d\n", + row, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-row"); + if (ret) + dev_err(dev, "keypad row[%d] gpio request failed\n", + row); + } + + for (col = 0; col < keypad->cols; col++) { + gpio = of_get_named_gpio(np, "col-gpios", col); + keypad->col_gpios[col] = gpio; + if (!gpio_is_valid(gpio)) { + dev_err(dev, "keypad column[%d]: invalid gpio %d\n", + col, gpio); + continue; + } + + ret = gpio_request(gpio, "keypad-col"); + if (ret) + dev_err(dev, "keypad column[%d] gpio request failed\n", + col); + } +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ + int cnt; + + for (cnt = 0; cnt < keypad->rows; cnt++) + if (gpio_is_valid(keypad->row_gpios[cnt])) + gpio_free(keypad->row_gpios[cnt]); + + for (cnt = 0; cnt < keypad->cols; cnt++) + if (gpio_is_valid(keypad->col_gpios[cnt])) + gpio_free(keypad->col_gpios[cnt]); +} +#else +static +struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev) +{ + return NULL; +} + +static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad) +{ +} +#endif + static int __devinit samsung_keypad_probe(struct platform_device *pdev) { const struct samsung_keypad_platdata *pdata; @@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) unsigned int keymap_size; int error; - pdata = pdev->dev.platform_data; + if (pdev->dev.of_node) + pdata = samsung_keypad_parse_dt(&pdev->dev); + else + pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); return -EINVAL; @@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) keypad->cols = pdata->cols; init_waitqueue_head(&keypad->wait); + if (pdev->dev.of_node) { +#ifdef CONFIG_OF + samsung_keypad_parse_dt_gpio(&pdev->dev, keypad); + keypad->type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s5pv210-keypad"); +#endif + } else { + keypad->type = platform_get_device_id(pdev)->driver_data; + } + input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; @@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, pdata->wakeup); platform_set_drvdata(pdev, keypad); + + if (pdev->dev.of_node) { + devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap); + devm_kfree(&pdev->dev, (void *)pdata->keymap_data); + devm_kfree(&pdev->dev, (void *)pdata); + } return 0; err_free_irq: free_irq(keypad->irq, keypad); err_put_clk: clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); err_unmap_base: iounmap(keypad->base); err_free_mem: @@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev) free_irq(keypad->irq, keypad); clk_put(keypad->clk); + samsung_keypad_dt_gpio_free(keypad); iounmap(keypad->base); kfree(keypad); @@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = { }; #endif +#ifdef CONFIG_OF +static const struct of_device_id samsung_keypad_dt_match[] = { + { .compatible = "samsung,s3c6410-keypad" }, + { .compatible = "samsung,s5pv210-keypad" }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match); +#else +#define samsung_keypad_dt_match NULL +#endif + static struct platform_device_id samsung_keypad_driver_ids[] = { { .name = "samsung-keypad", @@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = { .driver = { .name = "samsung-keypad", .owner = THIS_MODULE, + .of_match_table = samsung_keypad_dt_match, #ifdef CONFIG_PM .pm = &samsung_keypad_pm_ops, #endif diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 5b979d9cc332..175067a17c46 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -25,6 +25,7 @@ #include <linux/clk.h> #include <linux/log2.h> #include <linux/slab.h> +#include <linux/of.h> #include <mach/hardware.h> #include <asm/uaccess.h> @@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) goto err_nortc; } - s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; +#ifdef CONFIG_OF + if (pdev->dev.of_node) + s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node, + "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410; + else +#endif + s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data; /* Check RTC Time */ @@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id s3c_rtc_dt_match[] = { + { .compatible = "samsung,s3c2410-rtc" }, + { .compatible = "samsung,s3c6410-rtc" }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match); +#else +#define s3c_rtc_dt_match NULL +#endif + static struct platform_device_id s3c_rtc_driver_ids[] = { { .name = "s3c2410-rtc", @@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = { .driver = { .name = "s3c-rtc", .owner = THIS_MODULE, + .of_match_table = s3c_rtc_dt_match, }, }; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 925a1e547a83..fb89b85d0d81 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -457,7 +457,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 + default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs @@ -465,7 +465,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 + default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help Select the number of available UART ports for the Samsung S3C @@ -495,47 +495,6 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index e10cf5b54b6d..84bc2e5a57be 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -39,11 +39,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c deleted file mode 100644 index b1d7e7c1849d..000000000000 --- a/drivers/tty/serial/s3c2410.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c deleted file mode 100644 index 2234bf9ced45..000000000000 --- a/drivers/tty/serial/s3c2412.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c deleted file mode 100644 index 1d0c324b813f..000000000000 --- a/drivers/tty/serial/s3c2440.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c deleted file mode 100644 index e2f6913d84d5..000000000000 --- a/drivers/tty/serial/s3c6400.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c deleted file mode 100644 index 8b0b888a1b76..000000000000 --- a/drivers/tty/serial/s5pv210.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/delay.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <plat/regs-serial.h> -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - /* It is need to delay When reset FIFO register */ - udelay(1); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index b31f1c3a2c4c..f96f37b5fec6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -42,6 +42,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> #include <asm/irq.h> @@ -49,6 +50,7 @@ #include <mach/map.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include "samsung.h" @@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) { + struct s3c24xx_uart_port *ourport; + if (port->dev == NULL) return NULL; - return (struct s3c2410_uartcfg *)port->dev->platform_data; + ourport = container_of(port, struct s3c24xx_uart_port, port); + return ourport->cfg; } static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, @@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, struct s3c24xx_uart_info *info = ourport->info; if (ufstat & info->rx_fifofull) - return info->fifosize; + return ourport->port.fifosize; return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; } @@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, * */ +#define MAX_CLK_NAME_LENGTH 15 -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +static inline int s3c24xx_serial_getsource(struct uart_port *port) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + if (info->num_clks == 1) + return 0; - return (info->set_clksrc)(port, c); + ucon = rd_regl(port, S3C2410_UCON); + ucon &= info->clksel_mask; + return ucon >> info->clksel_shift; } -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) +static void s3c24xx_serial_setsource(struct uart_port *port, + unsigned int clk_sel) { - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - calc->clksrc = clksrc; + if (info->num_clks == 1) + return; - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } + ucon = rd_regl(port, S3C2410_UCON); + if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) + return; - calc->quot--; - return 1; + ucon &= ~info->clksel_mask; + ucon |= clk_sel << info->clksel_shift; + wr_regl(port, S3C2410_UCON, ucon); } -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) +static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, + unsigned int req_baud, struct clk **best_clk, + unsigned int *clk_num) { - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk + struct s3c24xx_uart_info *info = ourport->info; + struct clk *clk; + unsigned long rate; + unsigned int cnt, baud, quot, clk_sel, best_quot = 0; + char clkname[MAX_CLK_NAME_LENGTH]; + int calc_deviation, deviation = (1 << 30) - 1; + + *best_clk = NULL; + clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : + ourport->info->def_clk_sel; + for (cnt = 0; cnt < info->num_clks; cnt++) { + if (!(clk_sel & (1 << cnt))) + continue; + + sprintf(clkname, "clk_uart_baud%d", cnt); + clk = clk_get(ourport->port.dev, clkname); + if (IS_ERR_OR_NULL(clk)) + continue; + + rate = clk_get_rate(clk); + if (!rate) + continue; + + if (ourport->info->has_divslot) { + unsigned long div = rate / req_baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we + * calculated by not multiplying the baud by 16) as it + * is easy enough to recalculate. */ - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; + quot = div / 16; + baud = rate / div; + } else { + quot = (rate + (8 * req_baud)) / (16 * req_baud); + baud = rate / (quot * 16); } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; + quot--; - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; + calc_deviation = req_baud - baud; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } + if (calc_deviation < deviation) { + *best_clk = clk; + best_quot = quot; + *clk_num = cnt; + deviation = calc_deviation; } } - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; + return best_quot; } /* udivslot_table[] @@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; struct clk *clk = NULL; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, clk_sel = 0; unsigned int ulcon; unsigned int umcon; unsigned int udivslot = 0; @@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, */ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - + quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + if (!clk) + return; /* check to see if we need to change clock source */ - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); + if (ourport->baudclk != clk) { + s3c24xx_serial_setsource(port, clk_sel); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); @@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, clk_enable(clk); - ourport->clksrc = clksrc; ourport->baudclk = clk; ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } @@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS /* s3c24xx_serial_resetport * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) + * reset the fifos and other the settings. */ -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) +static void s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned int ucon_mask; + + ucon_mask = info->clksel_mask; + if (info->type == PORT_S3C2440) + ucon_mask |= S3C2440_UCON0_DIVMASK; - return (info->reset_port)(port, cfg); + ucon &= ucon_mask; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + /* some delay is required after fifo reset */ + udelay(1); } @@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p */ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, struct platform_device *platdev) { struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; + struct s3c2410_uartcfg *cfg = ourport->cfg; struct resource *res; int ret; @@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (platdev == NULL) return -ENODEV; - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - if (port->mapbase != 0) return 0; - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - /* setup info for port */ port->dev = &platdev->dev; - ourport->info = info; /* Startup sequence is different for s3c64xx and higher SoC's */ if (s3c24xx_serial_has_interrupt_mask(port)) s3c24xx_serial_ops.startup = s3c64xx_serial_startup; - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - port->uartclk = 1; if (cfg->uart_flags & UPF_CONS_FLOW) { @@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name); } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + /* Device driver serial port probe */ +static const struct of_device_id s3c24xx_uart_dt_match[]; static int probe_index; -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) +static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); + return (struct s3c24xx_serial_drv_data *)match->data; + } +#endif + return (struct s3c24xx_serial_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_serial_probe(struct platform_device *pdev) { struct s3c24xx_uart_port *ourport; int ret; - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index); ourport = &s3c24xx_serial_ports[probe_index]; + + ourport->drv_data = s3c24xx_get_driver_data(pdev); + if (!ourport->drv_data) { + dev_err(&pdev->dev, "could not find driver data\n"); + return -ENODEV; + } + + ourport->info = ourport->drv_data->info; + ourport->cfg = (pdev->dev.platform_data) ? + (struct s3c2410_uartcfg *)pdev->dev.platform_data : + ourport->drv_data->def_cfg; + + ourport->port.fifosize = (ourport->info->fifosize) ? + ourport->info->fifosize : + ourport->drv_data->fifosize[probe_index]; + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); - ret = s3c24xx_serial_init_port(ourport, info, dev); + ret = s3c24xx_serial_init_port(ourport, pdev); if (ret < 0) goto probe_err; dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); + platform_set_drvdata(pdev, &ourport->port); - ret = device_create_file(&dev->dev, &dev_attr_clock_source); + ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + dev_err(&pdev->dev, "failed to add clock source attr.\n"); ret = s3c24xx_serial_cpufreq_register(ourport); if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); return 0; @@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev, return ret; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) +static int __devexit s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev) return 0; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - /* UART power management code */ #ifdef CONFIG_PM_SLEEP static int s3c24xx_serial_suspend(struct device *dev) @@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { #define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - - drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - /* Console code */ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE @@ -1395,12 +1331,13 @@ static void __init s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { - struct s3c24xx_uart_clksrc clksrc; struct clk *clk; unsigned int ulcon; unsigned int ucon; unsigned int ubrdiv; unsigned long rate; + unsigned int clk_sel; + char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON); ucon = rd_regl(port, S3C2410_UCON); @@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, /* now calculate the baud rate */ - s3c24xx_serial_getsource(port, &clksrc); + clk_sel = s3c24xx_serial_getsource(port); + sprintf(clk_name, "clk_uart_baud%d", clk_sel); - clk = clk_get(port->dev, clksrc.name); + clk = clk_get(port->dev, clk_name); if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; + rate = clk_get_rate(clk); else rate = 1; - *baud = rate / (16 * (ubrdiv + 1)); dbg("calculated baud %d\n", *baud); } } -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - static int __init s3c24xx_serial_console_setup(struct console *co, char *options) { @@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - static struct console s3c24xx_serial_console = { .name = S3C24XX_SERIAL_NAME, .device = uart_console_device, @@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = { .setup = s3c24xx_serial_console_setup, .data = &s3c24xx_uart_drv, }; +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) +#ifdef CONFIG_CPU_S3C2410 +static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S3C2410_UCON_CLKMASK, + .clksel_shift = S3C2410_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#else +#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#else +#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - dbg("s3c24xx_serial_initconsole\n"); +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ + defined(CONFIG_CPU_S3C2443) +static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#else +#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - /* select driver based on the cpu */ +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \ + defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \ + defined(CONFIG_CPU_S5PC100) +static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C6400_UCON_CLKMASK, + .clksel_shift = S3C6400_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#else +#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } +#ifdef CONFIG_CPU_S5PV210 +static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S5PV210 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S5PV210_UCON_CLKMASK, + .clksel_shift = S5PV210_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#else +#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; +#ifdef CONFIG_CPU_EXYNOS4210 +static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung Exynos4 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#else +#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); +static struct platform_device_id s3c24xx_serial_driver_ids[] = { + { + .name = "s3c2410-uart", + .driver_data = S3C2410_SERIAL_DRV_DATA, + }, { + .name = "s3c2412-uart", + .driver_data = S3C2412_SERIAL_DRV_DATA, + }, { + .name = "s3c2440-uart", + .driver_data = S3C2440_SERIAL_DRV_DATA, + }, { + .name = "s3c6400-uart", + .driver_data = S3C6400_SERIAL_DRV_DATA, + }, { + .name = "s5pv210-uart", + .driver_data = S5PV210_SERIAL_DRV_DATA, + }, { + .name = "exynos4210-uart", + .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); - register_console(&s3c24xx_serial_console); - return 0; +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,exynos4210-uart", + .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); +#else +#define s3c24xx_uart_dt_match NULL +#endif + +static struct platform_driver samsung_serial_driver = { + .probe = s3c24xx_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .id_table = s3c24xx_serial_driver_ids, + .driver = { + .name = "samsung-uart", + .owner = THIS_MODULE, + .pm = SERIAL_SAMSUNG_PM_OPS, + .of_match_table = s3c24xx_uart_dt_match, + }, +}; + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return platform_driver_register(&samsung_serial_driver); } -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); +MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 8e87b788e5c6..1a4bca3e4179 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -19,20 +19,25 @@ struct s3c24xx_uart_info { unsigned long tx_fifomask; unsigned long tx_fifoshift; unsigned long tx_fifofull; + unsigned int def_clk_sel; + unsigned long num_clks; + unsigned long clksel_mask; + unsigned long clksel_shift; /* uart port features */ unsigned int has_divslot:1; - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - /* uart controls */ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); }; +struct s3c24xx_serial_drv_data { + struct s3c24xx_uart_info *info; + struct s3c2410_uartcfg *def_cfg; + unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; +}; + struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -43,10 +48,13 @@ struct s3c24xx_uart_port { unsigned int tx_irq; struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + struct s3c24xx_serial_drv_data *drv_data; + + /* reference to platform data */ + struct s3c2410_uartcfg *cfg; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; @@ -56,7 +64,6 @@ struct s3c24xx_uart_port { /* conversion functions */ #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) /* register access controls */ @@ -69,17 +76,6 @@ struct s3c24xx_uart_port { #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG extern void printascii(const char *); diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index d12f077a6daf..12e023c19ac1 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -12,17 +12,9 @@ #ifndef __AMBA_PL330_H_ #define __AMBA_PL330_H_ +#include <linux/dmaengine.h> #include <asm/hardware/pl330.h> -struct dma_pl330_peri { - /* - * Peri_Req i/f of the DMAC that is - * peripheral could be reached from. - */ - u8 peri_id; /* specific dma id */ - enum pl330_reqtype rqtype; -}; - struct dma_pl330_platdata { /* * Number of valid peripherals connected to DMAC. @@ -33,9 +25,12 @@ struct dma_pl330_platdata { */ u8 nr_valid_peri; /* Array of valid peripherals */ - struct dma_pl330_peri *peri; + u8 *peri_id; + /* Operational capabilities */ + dma_cap_mask_t cap_mask; /* Bytes to allocate for MC buffer */ unsigned mcbuf_sz; }; +extern bool pl330_filter(struct dma_chan *chan, void *param); #endif /* __AMBA_PL330_H_ */ |
