summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig8
-rw-r--r--drivers/media/dvb/dvb-usb/Makefile4
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-gpio.c763
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-gpio.h56
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-i2c.c851
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-i2c.h35
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-phy.c342
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-phy.h53
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-reg.h179
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-tuner.c476
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf-tuner.h89
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf.c854
-rw-r--r--drivers/media/dvb/dvb-usb/mxl111sf.h158
13 files changed, 3868 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 6e97bb35ba67..2c77382775c1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -381,3 +381,11 @@ config DVB_USB_IT913X
select DVB_IT913X_FE
help
Say Y here to support the it913x device
+
+config DVB_USB_MXL111SF
+ tristate "MxL111SF DTV USB2.0 support"
+ depends on DVB_USB
+ select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+ select VIDEO_TVEEPROM
+ help
+ Say Y here to support the MxL111SF USB2.0 DTV receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 03ae657dedd6..06f75f645963 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -97,6 +97,10 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
dvb-usb-it913x-objs := it913x.o
obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
+dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
+
ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
new file mode 100644
index 000000000000..e4121cb8f5ef
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.c
@@ -0,0 +1,763 @@
+/*
+ * mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-gpio.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define MXL_GPIO_MUX_REG_0 0x84
+#define MXL_GPIO_MUX_REG_1 0x89
+#define MXL_GPIO_MUX_REG_2 0x82
+
+#define MXL_GPIO_DIR_INPUT 0
+#define MXL_GPIO_DIR_OUTPUT 1
+
+
+static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", pin, val);
+
+ if ((pin > 0) && (pin < 8)) {
+ ret = mxl111sf_read_reg(state, 0x19, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 1));
+ tmp |= (val << (pin - 1));
+ ret = mxl111sf_write_reg(state, 0x19, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else if (pin <= 10) {
+ if (pin == 0)
+ pin += 7;
+ ret = mxl111sf_read_reg(state, 0x30, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (pin - 3));
+ tmp |= (val << (pin - 3));
+ ret = mxl111sf_write_reg(state, 0x30, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ } else
+ ret = -EINVAL;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x)", pin);
+
+ *val = 0;
+
+ switch (pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, 0x23, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin + 4)) & 0x01;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, 0x2f, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> pin) & 0x01;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, 0x22, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ *val = (tmp >> (pin - 3)) & 0x01;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+fail:
+ return ret;
+}
+
+struct mxl_gpio_cfg {
+ u8 pin;
+ u8 dir;
+ u8 val;
+};
+
+static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state,
+ struct mxl_gpio_cfg *gpio_cfg)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir);
+
+ switch (gpio_cfg->pin) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin + 4));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ case 7:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << gpio_cfg->pin);
+ tmp |= (gpio_cfg->dir << gpio_cfg->pin);
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ case 8:
+ case 9:
+ case 10:
+ ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ tmp &= ~(1 << (gpio_cfg->pin - 3));
+ tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3));
+ ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+ break;
+ default:
+ return -EINVAL; /* invalid pin */
+ }
+
+ ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ?
+ mxl111sf_set_gpo_state(state,
+ gpio_cfg->pin, gpio_cfg->val) :
+ mxl111sf_get_gpi_state(state,
+ gpio_cfg->pin, &gpio_cfg->val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state,
+ int gpio, int direction, int val)
+{
+ struct mxl_gpio_cfg gpio_config = {
+ .pin = gpio,
+ .dir = direction,
+ .val = val,
+ };
+
+ mxl_debug("(%d, %d, %d)", gpio, direction, val);
+
+ return mxl111sf_config_gpio_pins(state, &gpio_config);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define PIN_MUX_MPEG_MODE_MASK 0x40 /* 0x17 <6> */
+#define PIN_MUX_MPEG_PAR_EN_MASK 0x01 /* 0x18 <0> */
+#define PIN_MUX_MPEG_SER_EN_MASK 0x02 /* 0x18 <1> */
+#define PIN_MUX_MPG_IN_MUX_MASK 0x80 /* 0x3D <7> */
+#define PIN_MUX_BT656_ENABLE_MASK 0x04 /* 0x12 <2> */
+#define PIN_MUX_I2S_ENABLE_MASK 0x40 /* 0x15 <6> */
+#define PIN_MUX_SPI_MODE_MASK 0x10 /* 0x3D <4> */
+#define PIN_MUX_MCLK_EN_CTRL_MASK 0x10 /* 0x82 <4> */
+#define PIN_MUX_MPSYN_EN_CTRL_MASK 0x20 /* 0x82 <5> */
+#define PIN_MUX_MDVAL_EN_CTRL_MASK 0x40 /* 0x82 <6> */
+#define PIN_MUX_MPERR_EN_CTRL_MASK 0x80 /* 0x82 <7> */
+#define PIN_MUX_MDAT_EN_0_MASK 0x10 /* 0x84 <4> */
+#define PIN_MUX_MDAT_EN_1_MASK 0x20 /* 0x84 <5> */
+#define PIN_MUX_MDAT_EN_2_MASK 0x40 /* 0x84 <6> */
+#define PIN_MUX_MDAT_EN_3_MASK 0x80 /* 0x84 <7> */
+#define PIN_MUX_MDAT_EN_4_MASK 0x10 /* 0x89 <4> */
+#define PIN_MUX_MDAT_EN_5_MASK 0x20 /* 0x89 <5> */
+#define PIN_MUX_MDAT_EN_6_MASK 0x40 /* 0x89 <6> */
+#define PIN_MUX_MDAT_EN_7_MASK 0x80 /* 0x89 <7> */
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config)
+{
+ u8 r12, r15, r17, r18, r3D, r82, r84, r89;
+ int ret;
+
+ mxl_debug("(%d)", pin_mux_config);
+
+ ret = mxl111sf_read_reg(state, 0x17, &r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x18, &r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x12, &r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x15, &r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x82, &r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x84, &r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x89, &r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_read_reg(state, 0x3D, &r3D);
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch (pin_mux_config) {
+ case PIN_MUX_TS_OUT_PARALLEL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_TS_OUT_SERIAL:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 1 */
+ r82 |= PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 1 */
+ r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 1 */
+ r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0xF */
+ r84 |= 0xF0;
+ /* mdat_en_ctrl[7:4] = 0xF */
+ r89 |= 0xF0;
+ break;
+ case PIN_MUX_GPIO_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SERIAL_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_1:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 1 */
+ r3D |= PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_SPI_IN_MODE_0:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 1 */
+ r18 |= PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 1 */
+ r3D |= PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_TS_PARALLEL_IN:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 1 */
+ r18 |= PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_BT656_I2S_MODE:
+ /* mpeg_mode = 0 */
+ r17 &= ~PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 1 */
+ r12 |= PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 1 */
+ r15 |= PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ case PIN_MUX_DEFAULT:
+ default:
+ /* mpeg_mode = 1 */
+ r17 |= PIN_MUX_MPEG_MODE_MASK;
+ /* mpeg_par_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK;
+ /* mpeg_ser_en = 0 */
+ r18 &= ~PIN_MUX_MPEG_SER_EN_MASK;
+ /* mpg_in_mux = 0 */
+ r3D &= ~PIN_MUX_MPG_IN_MUX_MASK;
+ /* bt656_enable = 0 */
+ r12 &= ~PIN_MUX_BT656_ENABLE_MASK;
+ /* i2s_enable = 0 */
+ r15 &= ~PIN_MUX_I2S_ENABLE_MASK;
+ /* spi_mode = 0 */
+ r3D &= ~PIN_MUX_SPI_MODE_MASK;
+ /* mclk_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK;
+ /* mperr_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK;
+ /* mdval_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK;
+ /* mpsyn_en_ctrl = 0 */
+ r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK;
+ /* mdat_en_ctrl[3:0] = 0x0 */
+ r84 &= 0x0F;
+ /* mdat_en_ctrl[7:4] = 0x0 */
+ r89 &= 0x0F;
+ break;
+ }
+
+ ret = mxl111sf_write_reg(state, 0x17, r17);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x18, r18);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x12, r12);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x15, r15);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x82, r82);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x84, r84);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x89, r89);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x3D, r3D);
+ if (mxl_fail(ret))
+ goto fail;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val);
+}
+
+static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state)
+{
+ u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */
+ int i, ret;
+
+ mxl_debug("()");
+
+ for (i = 3; i < 8; i++) {
+ ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01);
+ if (mxl_fail(ret))
+ break;
+ }
+
+ return ret;
+}
+
+#define PCA9534_I2C_ADDR (0x40 >> 1)
+static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ u8 w[2] = { 1, 0 };
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 1 },
+ { .addr = PCA9534_I2C_ADDR,
+ .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("(%d, %d)", gpio, val);
+
+ /* read current GPIO levels from flip-flop */
+ i2c_transfer(&state->d->i2c_adap, msg, 2);
+
+ /* prepare write buffer with current GPIO levels */
+ msg[0].len = 2;
+#if 0
+ w[0] = 1;
+#endif
+ w[1] = r;
+
+ /* clear the desired GPIO */
+ w[1] &= ~(1 << gpio);
+
+ /* set the desired GPIO value */
+ w[1] |= ((val ? 1 : 0) << gpio);
+
+ /* write new GPIO levels to flip-flop */
+ i2c_transfer(&state->d->i2c_adap, &msg[0], 1);
+
+ return 0;
+}
+
+static int pca9534_init_port_expander(struct mxl111sf_state *state)
+{
+ u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */
+
+ struct i2c_msg msg = {
+ .addr = PCA9534_I2C_ADDR,
+ .flags = 0, .buf = w, .len = 2
+ };
+
+ mxl_debug("()");
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ /* configure all pins as outputs */
+ w[0] = 3;
+ w[1] = 0;
+
+ i2c_transfer(&state->d->i2c_adap, &msg, 1);
+
+ return 0;
+}
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val)
+{
+ mxl_debug("(%d, %d)", gpio, val);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_set_gpio(state, gpio, val);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_set_gpio(state, gpio, val);
+ }
+}
+
+static int mxl111sf_probe_port_expander(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 w = 1;
+ u8 r = 0;
+ struct i2c_msg msg[] = {
+ { .flags = 0, .buf = &w, .len = 1 },
+ { .flags = I2C_M_RD, .buf = &r, .len = 1 },
+ };
+
+ mxl_debug("()");
+
+ msg[0].addr = 0x70 >> 1;
+ msg[1].addr = 0x70 >> 1;
+
+ /* read current GPIO levels from flip-flop */
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+
+ msg[0].addr = 0x40 >> 1;
+ msg[1].addr = 0x40 >> 1;
+
+ ret = i2c_transfer(&state->d->i2c_adap, msg, 2);
+ if (ret == 2) {
+ state->port_expander_addr = msg[0].addr;
+ state->gpio_port_expander = mxl111sf_PCA9534;
+ mxl_debug("found port expander at 0x%02x",
+ state->port_expander_addr);
+ return 0;
+ }
+ state->port_expander_addr = 0xff;
+ state->gpio_port_expander = mxl111sf_gpio_hw;
+ mxl_debug("using hardware gpio");
+ return 0;
+}
+
+int mxl111sf_init_port_expander(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ if (0x00 == state->port_expander_addr)
+ mxl111sf_probe_port_expander(state);
+
+ switch (state->gpio_port_expander) {
+ default:
+ mxl_printk(KERN_ERR,
+ "gpio_port_expander undefined, assuming PCA9534");
+ /* fall-thru */
+ case mxl111sf_PCA9534:
+ return pca9534_init_port_expander(state);
+ case mxl111sf_gpio_hw:
+ return mxl111sf_hw_gpio_initialize(state);
+ }
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode)
+{
+/* GPO:
+ * 3 - ATSC/MH# | 1 = ATSC transport, 0 = MH transport | default 0
+ * 4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset | default 0
+ * 5 - ATSC_EN | 1 = ATSC power enable, 0 = ATSC power off | default 0
+ * 6 - MH_RESET# | 1 = MH enable, 0 = MH Reset | default 0
+ * 7 - MH_EN | 1 = MH power enable, 0 = MH power off | default 0
+ */
+ mxl_debug("(%d)", mode);
+
+ switch (mode) {
+ case MXL111SF_GPIO_MOD_MH:
+ mxl111sf_set_gpio(state, 4, 0);
+ mxl111sf_set_gpio(state, 5, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 7, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 6, 1);
+ msleep(50);
+
+ mxl111sf_set_gpio(state, 3, 0);
+ break;
+ case MXL111SF_GPIO_MOD_ATSC:
+ mxl111sf_set_gpio(state, 6, 0);
+ mxl111sf_set_gpio(state, 7, 0);
+ msleep(50);
+ mxl111sf_set_gpio(state, 5, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 4, 1);
+ msleep(50);
+ mxl111sf_set_gpio(state, 3, 1);
+ break;
+ default: /* DVBT / STANDBY */
+ mxl111sf_init_port_expander(state);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
new file mode 100644
index 000000000000..0220f54299a5
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-gpio.h
@@ -0,0 +1,56 @@
+/*
+ * mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_GPIO_H_
+#define _DVB_USB_MXL111SF_GPIO_H_
+
+#include "mxl111sf.h"
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
+int mxl111sf_init_port_expander(struct mxl111sf_state *state);
+
+#define MXL111SF_GPIO_MOD_DVBT 0
+#define MXL111SF_GPIO_MOD_MH 1
+#define MXL111SF_GPIO_MOD_ATSC 2
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);
+
+enum mxl111sf_mux_config {
+ PIN_MUX_DEFAULT = 0,
+ PIN_MUX_TS_OUT_PARALLEL,
+ PIN_MUX_TS_OUT_SERIAL,
+ PIN_MUX_GPIO_MODE,
+ PIN_MUX_TS_SERIAL_IN_MODE_0,
+ PIN_MUX_TS_SERIAL_IN_MODE_1,
+ PIN_MUX_TS_SPI_IN_MODE_0,
+ PIN_MUX_TS_SPI_IN_MODE_1,
+ PIN_MUX_TS_PARALLEL_IN,
+ PIN_MUX_BT656_I2S_MODE,
+};
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+ enum mxl111sf_mux_config pin_mux_config);
+
+#endif /* _DVB_USB_MXL111SF_GPIO_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
new file mode 100644
index 000000000000..a330987f7e11
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
@@ -0,0 +1,851 @@
+/*
+ * mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* SW-I2C ----------------------------------------------------------------- */
+
+#define SW_I2C_ADDR 0x1a
+#define SW_I2C_EN 0x02
+#define SW_SCL_OUT 0x04
+#define SW_SDA_OUT 0x08
+#define SW_SDA_IN 0x04
+
+#define SW_I2C_BUSY_ADDR 0x2f
+#define SW_I2C_BUSY 0x02
+
+static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state,
+ u8 byte)
+{
+ int i, ret;
+ u8 data = 0;
+
+ mxl_i2c("(0x%02x)", byte);
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+
+ data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | data);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* last bit was 0 so we need to release SDA */
+ if (!(byte & 1)) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+
+ /* CLK high for ACK readback */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* drop the CLK after getting ACK, SDA will go high right away */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state,
+ u8 *pbyte)
+{
+ int i, ret;
+ u8 byte = 0;
+ u8 data = 0;
+
+ mxl_i2c("()");
+
+ *pbyte = 0;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ for (i = 0; i < 8; i++) {
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN |
+ SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (data & SW_SDA_IN)
+ byte |= (0x80 >> i);
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ *pbyte = byte;
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_start(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* start */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_stop(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN); /* stop */
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_SCL_OUT | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_ack(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 b = 0;
+
+ mxl_i2c("()");
+
+ ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* pull SDA low */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl111sf_i2c_nack(struct mxl111sf_state *state)
+{
+ int ret;
+
+ mxl_i2c("()");
+
+ /* SDA high to signal last byte read from slave */
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+ 0x10 | SW_I2C_EN | SW_SDA_OUT);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, ret;
+
+ mxl_i2c("()");
+
+ if (msg->flags & I2C_M_RD) {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) | 0x01);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_recvbyte(state,
+ &msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ if (i < msg->len - 1)
+ mxl111sf_i2c_ack(state);
+ }
+
+ mxl111sf_i2c_nack(state);
+
+ ret = mxl111sf_i2c_stop(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ } else {
+
+ ret = mxl111sf_i2c_start(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ (msg->addr << 1) & 0xfe);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+
+ for (i = 0; i < msg->len; i++) {
+ ret = mxl111sf_i2c_bitbang_sendbyte(state,
+ msg->buf[i]);
+ if (mxl_fail(ret)) {
+ mxl111sf_i2c_stop(state);
+ goto fail;
+ }
+ }
+
+ /* FIXME: we only want to do this on the last transaction */
+ mxl111sf_i2c_stop(state);
+ }
+fail:
+ return ret;
+}
+
+/* HW-I2C ----------------------------------------------------------------- */
+
+#define USB_WRITE_I2C_CMD 0x99
+#define USB_READ_I2C_CMD 0xdd
+#define USB_END_I2C_CMD 0xfe
+
+#define USB_WRITE_I2C_CMD_LEN 26
+#define USB_READ_I2C_CMD_LEN 24
+
+#define I2C_MUX_REG 0x30
+#define I2C_CONTROL_REG 0x00
+#define I2C_SLAVE_ADDR_REG 0x08
+#define I2C_DATA_REG 0x0c
+#define I2C_INT_STATUS_REG 0x10
+
+static int mxl111sf_i2c_send_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, NULL, 0);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static int mxl111sf_i2c_get_data(struct mxl111sf_state *state,
+ u8 index, u8 *wdata, u8 *rdata)
+{
+ int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+ &wdata[1], 25, rdata, 24);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c_adv("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_INT_STATUS_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (buf[1] & 0x04)
+ status = 1;
+
+ return status;
+}
+
+static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state)
+{
+ u8 status = 0;
+ u8 buf[26];
+
+ mxl_i2c("()");
+
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x00;
+ buf[4] = 0x00;
+
+ buf[5] = I2C_INT_STATUS_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+
+ mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+ if (0x08 == (buf[1] & 0x08))
+ status = 1;
+
+ if ((buf[5] & 0x02) == 0x02)
+ mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */
+
+ return status;
+}
+
+static int mxl111sf_i2c_readagain(struct mxl111sf_state *state,
+ u8 count, u8 *rbuf)
+{
+ u8 i2c_w_data[26];
+ u8 i2c_r_data[24];
+ u8 i = 0;
+ u8 fifo_status = 0;
+ int ret;
+ int status = 0;
+
+ mxl_i2c("read %d bytes", count);
+
+ while ((fifo_status == 0) && (i++ < 5))
+ fifo_status = mxl111sf_i2c_check_fifo(state);
+
+ i2c_w_data[0] = 0xDD;
+ i2c_w_data[1] = 0x00;
+
+ for (i = 2; i < 26; i++)
+ i2c_w_data[i] = 0xFE;
+
+ for (i = 0; i < count; i++) {
+ i2c_w_data[2+(i*3)] = 0x0C;
+ i2c_w_data[3+(i*3)] = 0x00;
+ i2c_w_data[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+
+ /* Check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("error!");
+ } else {
+ for (i = 0; i < count; i++) {
+ rbuf[i] = i2c_r_data[(i*3)+1];
+ mxl_i2c("%02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+
+ status = 1;
+ }
+
+ return status;
+}
+
+#define HWI2C400 1
+static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
+ struct i2c_msg *msg)
+{
+ int i, k, ret = 0;
+ u16 index = 0;
+ u8 buf[26];
+ u8 i2c_r_data[24];
+ u16 block_len;
+ u16 left_over_len;
+ u8 rd_status[8];
+ u8 ret_status;
+ u8 readbuff[26];
+
+ mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d",
+ msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0,
+ (!msg->flags & I2C_M_RD) ? msg->len : 0);
+
+ for (index = 0; index < 26; index++)
+ buf[index] = USB_END_I2C_CMD;
+
+ /* command to indicate data payload is destined for I2C interface */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* enable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x80;
+ buf[4] = 0x00;
+
+ /* enable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x81;
+ buf[7] = 0x00;
+
+ /* set Timeout register on I2C interface */
+ buf[8] = 0x14;
+ buf[9] = 0xff;
+ buf[10] = 0x00;
+#if 0
+ /* enable Interrupts on I2C interface */
+ buf[8] = 0x24;
+ buf[9] = 0xF7;
+ buf[10] = 0x00;
+#endif
+ buf[11] = 0x24;
+ buf[12] = 0xF7;
+ buf[13] = 0x00;
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* write data on I2C bus */
+ if ((!msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("%d\t%02x", msg->len, msg->buf[0]);
+
+ /* control register on I2C interface to initialize I2C bus */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x5E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C Slave device Address */
+ buf[5] = I2C_SLAVE_ADDR_REG;
+ buf[6] = (msg->addr);
+ buf[7] = 0x00;
+ buf[8] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for slave device status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of i2c
+ data required to program */
+ block_len = (msg->len / 8);
+ left_over_len = (msg->len % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ for (index = 0; index < block_len; index++) {
+ for (i = 0; i < 8; i++) {
+ /* write data on I2C interface */
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0x99;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = msg->buf[(index*8)+i];
+ mxl_i2c("index = %d %d data %d",
+ index, i, msg->buf[(index*8)+i]);
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK writing slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ }
+
+ /* issue I2C STOP after write */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x4E;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+
+ /* read data from I2C bus */
+ if ((msg->flags & I2C_M_RD) && (msg->len > 0)) {
+ mxl_i2c("read buf len %d", msg->len);
+
+ /* command to indicate data payload is
+ destined for I2C interface */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ /* I2C xfer length */
+ buf[5] = 0x14;
+ buf[6] = (msg->len & 0xFF);
+ buf[7] = 0;
+
+ /* I2C slave device Address */
+ buf[8] = I2C_SLAVE_ADDR_REG;
+ buf[9] = msg->addr;
+ buf[10] = 0x00;
+ buf[11] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* I2C interface can do I2C operations in block of 8 bytes of
+ I2C data. calculation to figure out number of blocks of
+ i2c data required to program */
+ block_len = ((msg->len) / 8);
+ left_over_len = ((msg->len) % 8);
+ index = 0;
+
+ mxl_i2c("block_len %d, left_over_len %d",
+ block_len, left_over_len);
+
+ /* command to read data from I2C interface */
+ buf[0] = USB_READ_I2C_CMD;
+ buf[1] = 0x00;
+
+ for (index = 0; index < block_len; index++) {
+ /* setup I2C read request packet on I2C interface */
+ for (i = 0; i < 8; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+
+ ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* copy data from i2c data payload to read buffer */
+ for (i = 0; i < 8; i++) {
+ rd_status[i] = i2c_r_data[(i*3)+2];
+
+ if (rd_status[i] == 0x04) {
+ if (i < 7) {
+ mxl_i2c("i2c fifo empty!"
+ " @ %d", i);
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ /* read again */
+ ret_status =
+ mxl111sf_i2c_readagain(
+ state, 8-(i+1),
+ readbuff);
+ if (ret_status == 1) {
+ for (k = 0;
+ k < 8-(i+1);
+ k++) {
+
+ msg->buf[(index*8)+(k+i+1)] =
+ readbuff[k];
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i)],
+ (index*8)+(k+i));
+ mxl_i2c("read data: %02x\t %02x",
+ msg->buf[(index*8)+(k+i+1)],
+ readbuff[k]);
+
+ }
+ goto stop_copy;
+ } else {
+ mxl_i2c("readagain "
+ "ERROR!");
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ } else {
+ msg->buf[(index*8)+i] =
+ i2c_r_data[(i*3)+1];
+ }
+ }
+stop_copy:
+ ;
+
+ }
+
+ if (left_over_len) {
+ for (k = 0; k < 26; k++)
+ buf[k] = USB_END_I2C_CMD;
+
+ buf[0] = 0xDD;
+ buf[1] = 0x00;
+
+ for (i = 0; i < left_over_len; i++) {
+ buf[2+(i*3)] = I2C_DATA_REG;
+ buf[3+(i*3)] = 0x00;
+ buf[4+(i*3)] = 0x00;
+ }
+ ret = mxl111sf_i2c_get_data(state, 0, buf,
+ i2c_r_data);
+
+ /* check for I2C NACK status */
+ if (mxl111sf_i2c_check_status(state) == 1) {
+ mxl_i2c("NACK reading slave address %02x",
+ msg->addr);
+
+ /* if NACK, stop I2C bus and exit */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+ ret = -EIO;
+ goto exit;
+ }
+
+ for (i = 0; i < left_over_len; i++) {
+ msg->buf[(block_len*8)+i] =
+ i2c_r_data[(i*3)+1];
+ mxl_i2c("read data: %02x\t %02x",
+ i2c_r_data[(i*3)+1],
+ i2c_r_data[(i*3)+2]);
+ }
+ }
+
+ /* indicate I2C interface to issue NACK
+ after next I2C read op */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0x17;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ buf[5] = USB_END_I2C_CMD;
+ ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* control register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xC7;
+ buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+ }
+exit:
+ /* STOP and disable I2C MUX */
+ buf[0] = USB_WRITE_I2C_CMD;
+ buf[1] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[5] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* Control Register */
+ buf[2] = I2C_CONTROL_REG;
+ buf[3] = 0xDF;
+ buf[4] = 0x03;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* de-initilize I2C BUS */
+ buf[8] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ /* disable I2C interface */
+ buf[2] = I2C_MUX_REG;
+ buf[3] = 0x81;
+ buf[4] = 0x00;
+
+ /* disable I2C interface */
+ buf[5] = I2C_MUX_REG;
+ buf[6] = 0x00;
+ buf[7] = 0x00;
+
+ /* disable I2C interface */
+ buf[8] = I2C_MUX_REG;
+ buf[9] = 0x00;
+ buf[10] = 0x00;
+
+ buf[11] = USB_END_I2C_CMD;
+ mxl111sf_i2c_send_data(state, 0, buf);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct mxl111sf_state *state = d->priv;
+ int hwi2c = (state->chip_rev > MXL111SF_V6);
+ int i, ret;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ ret = (hwi2c) ?
+ mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
+ mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
+ if (mxl_fail(ret)) {
+ mxl_debug_adv("failed with error %d on i2c "
+ "transaction %d of %d, %sing %d bytes "
+ "to/from 0x%02x", ret, i+1, num,
+ (msg[i].flags & I2C_M_RD) ?
+ "read" : "writ",
+ msg[i].len, msg[i].addr);
+
+ break;
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return i == num ? num : -EREMOTEIO;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
new file mode 100644
index 000000000000..a57a45ffb9e4
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.h
@@ -0,0 +1,35 @@
+/*
+ * mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_I2C_H_
+#define _DVB_USB_MXL111SF_I2C_H_
+
+#include <linux/i2c.h>
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num);
+
+#endif /* _DVB_USB_MXL111SF_I2C_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
new file mode 100644
index 000000000000..91dc1fc2825b
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
@@ -0,0 +1,342 @@
+/*
+ * mxl111sf-phy.c - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
+{
+ struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
+ {0x07, 0xff, 0x0c},
+ {0x58, 0xff, 0x9d},
+ {0x09, 0xff, 0x00},
+ {0x06, 0xff, 0x06},
+ {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
+ {0x8d, 0x01, 0x01}, /* NEGATE_Q */
+ {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
+ {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
+ {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
+ {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
+ {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
+ {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
+ {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
+ {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
+ {0x00, 0xff, 0x01}, /* Change to page 1 */
+ {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
+ {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
+ {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
+ {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
+ {0x00, 0xff, 0x00}, /* Change to page 0 */
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
+}
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
+{
+ int ret;
+ mxl_debug("()");
+
+ ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
+{
+ int ret;
+
+ mxl_debug("(%s)", MXL_SOC_MODE == mode ?
+ "MXL_SOC_MODE" : "MXL_TUNER_MODE");
+
+ /* set device mode */
+ ret = mxl111sf_write_reg(state, 0x03,
+ MXL_SOC_MODE == mode ? 0x01 : 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg_mask(state,
+ 0x7d, 0x40, MXL_SOC_MODE == mode ?
+ 0x00 : /* enable impulse noise filter,
+ INF_BYP = 0 */
+ 0x40); /* disable impulse noise filter,
+ INF_BYP = 1 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->device_mode = mode;
+fail:
+ return ret;
+}
+
+/* power up tuner */
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
+{
+ mxl_debug("(%d)", onoff);
+
+ return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
+}
+
+int mxl111sf_disable_656_port(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
+}
+
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
+{
+ mxl_debug("()");
+
+ return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
+}
+
+/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol)
+{
+ int ret;
+ u8 mode, tmp;
+
+ mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
+ clock_phase, mpeg_valid_pol, mpeg_sync_pol);
+
+ /* Enable PIN MUX */
+ ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
+ mxl_fail(ret);
+
+ /* Configure MPEG Clock phase */
+ mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+
+ if (clock_phase == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_CLK_PHASE;
+ else
+ mode |= V6_INVERTED_CLK_PHASE;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
+ mxl_fail(ret);
+
+ /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
+ * Get current configuration */
+ ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
+ mxl_fail(ret);
+
+ /* Data Input mode */
+ if (parallel_serial == TSIF_INPUT_PARALLEL) {
+ /* Disable serial mode */
+ mode &= ~V6_MPEG_IN_DATA_SERIAL;
+
+ /* Enable Parallel mode */
+ mode |= V6_MPEG_IN_DATA_PARALLEL;
+ } else {
+ /* Disable Parallel mode */
+ mode &= ~V6_MPEG_IN_DATA_PARALLEL;
+
+ /* Enable Serial Mode */
+ mode |= V6_MPEG_IN_DATA_SERIAL;
+
+ /* If serial interface is chosen, configure
+ MSB or LSB order in transmission */
+ ret = mxl111sf_read_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ &tmp);
+ mxl_fail(ret);
+
+ if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
+ tmp |= V6_MPEG_SER_MSB_FIRST;
+ else
+ tmp &= ~V6_MPEG_SER_MSB_FIRST;
+
+ ret = mxl111sf_write_reg(state,
+ V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+ tmp);
+ mxl_fail(ret);
+ }
+
+ /* MPEG Sync polarity */
+ if (mpeg_sync_pol == TSIF_NORMAL)
+ mode &= ~V6_INVERTED_MPEG_SYNC;
+ else
+ mode |= V6_INVERTED_MPEG_SYNC;
+
+ /* MPEG Valid polarity */
+ if (mpeg_valid_pol == 0)
+ mode &= ~V6_INVERTED_MPEG_VALID;
+ else
+ mode |= V6_INVERTED_MPEG_VALID;
+
+ ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
+{
+ static struct mxl111sf_reg_ctrl_info init_i2s[] = {
+ {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
+ {0x15, 0x60, 0x60}, /* Enable I2S */
+ {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
+ Inverted 656 Clock, I2S_SOFT_RESET,
+ 0 : Normal operation, 1 : Reset State */
+#if 0
+ {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
+#endif
+ {0x00, 0xff, 0x02}, /* Change to Control Page */
+ {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
+ {0x00, 0xff, 0x00},
+ {0, 0, 0}
+ };
+ int ret;
+
+ mxl_debug("(0x%02x)", sample_size);
+
+ ret = mxl111sf_ctrl_program_regs(state, init_i2s);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
+{
+ static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
+ {0x15, 0x40, 0x00},
+ {0, 0, 0}
+ };
+
+ mxl_debug("()");
+
+ return mxl111sf_ctrl_program_regs(state, disable_i2s);
+}
+
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width)
+{
+ int ret;
+ u8 tmp;
+
+ mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= msb_start_pos;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
+ if (mxl_fail(ret))
+ goto fail;
+
+ tmp &= 0xe0;
+ tmp |= data_width;
+ ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
+{
+ u8 val;
+ int ret;
+
+ mxl_debug("(%d)", onoff);
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (onoff)
+ val |= 0x04;
+ else
+ val &= ~0x04;
+
+ ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_write_reg(state, 0x00, 0x00);
+ if (mxl_fail(ret))
+ goto fail;
+fail:
+ return ret;
+}
+
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value)
+{
+ int ret;
+ u8 val;
+ /* current value will be set for both automatic & manual IDAC control */
+ val = current_value;
+
+ if (control_mode == IDAC_MANUAL_CONTROL) {
+ /* enable manual control of IDAC */
+ val |= IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
+ /* enable current sinking in manual mode */
+ val |= IDAC_CURRENT_SINKING_BIT_MASK;
+ else
+ /* disable current sinking in manual mode */
+ val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
+ } else {
+ /* disable manual control of IDAC */
+ val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
+
+ /* set hysteresis value reg: 0x0B<5:0> */
+ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
+ (hysteresis_value & 0x3F));
+ }
+
+ ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+
+ return val;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.h b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
new file mode 100644
index 000000000000..f0756071d347
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.h
@@ -0,0 +1,53 @@
+/*
+ * mxl111sf-phy.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_PHY_H_
+#define _DVB_USB_MXL111SF_PHY_H_
+
+#include "mxl111sf.h"
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state);
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode);
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff);
+int mxl111sf_disable_656_port(struct mxl111sf_state *state);
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state);
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state);
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+ unsigned int parallel_serial,
+ unsigned int msb_lsb_1st,
+ unsigned int clock_phase,
+ unsigned int mpeg_valid_pol,
+ unsigned int mpeg_sync_pol);
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+ u8 msb_start_pos, u8 data_width);
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size);
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state);
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff);
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+ u8 control_mode, u8 current_setting,
+ u8 current_value, u8 hysteresis_value);
+
+#endif /* _DVB_USB_MXL111SF_PHY_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-reg.h b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
new file mode 100644
index 000000000000..17831b0fb9db
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-reg.h
@@ -0,0 +1,179 @@
+/*
+ * mxl111sf-reg.h - driver for the MaxLinear MXL111SF
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_REG_H_
+#define _DVB_USB_MXL111SF_REG_H_
+
+#define CHIP_ID_REG 0xFC
+#define TOP_CHIP_REV_ID_REG 0xFA
+
+#define V6_SNR_RB_LSB_REG 0x27
+#define V6_SNR_RB_MSB_REG 0x28
+
+#define V6_N_ACCUMULATE_REG 0x11
+#define V6_RS_AVG_ERRORS_LSB_REG 0x2C
+#define V6_RS_AVG_ERRORS_MSB_REG 0x2D
+
+#define V6_IRQ_STATUS_REG 0x24
+#define IRQ_MASK_FEC_LOCK 0x10
+
+#define V6_SYNC_LOCK_REG 0x28
+#define SYNC_LOCK_MASK 0x10
+
+#define V6_RS_LOCK_DET_REG 0x28
+#define RS_LOCK_DET_MASK 0x08
+
+#define V6_INITACQ_NODETECT_REG 0x20
+#define V6_FORCE_NFFT_CPSIZE_REG 0x20
+
+#define V6_CODE_RATE_TPS_REG 0x29
+#define V6_CODE_RATE_TPS_MASK 0x07
+
+
+#define V6_CP_LOCK_DET_REG 0x28
+#define V6_CP_LOCK_DET_MASK 0x04
+
+#define V6_TPS_HIERACHY_REG 0x29
+#define V6_TPS_HIERARCHY_INFO_MASK 0x40
+
+#define V6_MODORDER_TPS_REG 0x2A
+#define V6_PARAM_CONSTELLATION_MASK 0x30
+
+#define V6_MODE_TPS_REG 0x2A
+#define V6_PARAM_FFT_MODE_MASK 0x0C
+
+
+#define V6_CP_TPS_REG 0x29
+#define V6_PARAM_GI_MASK 0x30
+
+#define V6_TPS_LOCK_REG 0x2A
+#define V6_PARAM_TPS_LOCK_MASK 0x40
+
+#define V6_FEC_PER_COUNT_REG 0x2E
+#define V6_FEC_PER_SCALE_REG 0x2B
+#define V6_FEC_PER_SCALE_MASK 0x03
+#define V6_FEC_PER_CLR_REG 0x20
+#define V6_FEC_PER_CLR_MASK 0x01
+
+#define V6_PIN_MUX_MODE_REG 0x1B
+#define V6_ENABLE_PIN_MUX 0x1E
+
+#define V6_I2S_NUM_SAMPLES_REG 0x16
+
+#define V6_MPEG_IN_CLK_INV_REG 0x17
+#define V6_MPEG_IN_CTRL_REG 0x18
+
+#define V6_INVERTED_CLK_PHASE 0x20
+#define V6_MPEG_IN_DATA_PARALLEL 0x01
+#define V6_MPEG_IN_DATA_SERIAL 0x02
+
+#define V6_INVERTED_MPEG_SYNC 0x04
+#define V6_INVERTED_MPEG_VALID 0x08
+
+#define TSIF_INPUT_PARALLEL 0
+#define TSIF_INPUT_SERIAL 1
+#define TSIF_NORMAL 0
+
+#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG 0x19
+#define V6_MPEG_SER_MSB_FIRST 0x80
+#define MPEG_SER_MSB_FIRST_ENABLED 0x01
+
+#define V6_656_I2S_BUFF_STATUS_REG 0x2F
+#define V6_656_OVERFLOW_MASK_BIT 0x08
+#define V6_I2S_OVERFLOW_MASK_BIT 0x01
+
+#define V6_I2S_STREAM_START_BIT_REG 0x14
+#define V6_I2S_STREAM_END_BIT_REG 0x15
+#define I2S_RIGHT_JUSTIFIED 0
+#define I2S_LEFT_JUSTIFIED 1
+#define I2S_DATA_FORMAT 2
+
+#define V6_TUNER_LOOP_THRU_CONTROL_REG 0x09
+#define V6_ENABLE_LOOP_THRU 0x01
+
+#define TOTAL_NUM_IF_OUTPUT_FREQ 16
+
+#define TUNER_NORMAL_IF_SPECTRUM 0x0
+#define TUNER_INVERT_IF_SPECTRUM 0x10
+
+#define V6_TUNER_IF_SEL_REG 0x06
+#define V6_TUNER_IF_FCW_REG 0x3C
+#define V6_TUNER_IF_FCW_BYP_REG 0x3D
+#define V6_RF_LOCK_STATUS_REG 0x23
+
+#define NUM_DIG_TV_CHANNEL 1000
+
+#define V6_DIG_CLK_FREQ_SEL_REG 0x07
+#define V6_REF_SYNTH_INT_REG 0x5C
+#define V6_REF_SYNTH_REMAIN_REG 0x58
+#define V6_DIG_RFREFSELECT_REG 0x32
+#define V6_XTAL_CLK_OUT_GAIN_REG 0x31
+#define V6_TUNER_LOOP_THRU_CTRL_REG 0x09
+#define V6_DIG_XTAL_ENABLE_REG 0x06
+#define V6_DIG_XTAL_BIAS_REG 0x66
+#define V6_XTAL_CAP_REG 0x08
+
+#define V6_GPO_CTRL_REG 0x18
+#define MXL_GPO_0 0x00
+#define MXL_GPO_1 0x01
+#define V6_GPO_0_MASK 0x10
+#define V6_GPO_1_MASK 0x20
+
+#define V6_111SF_GPO_CTRL_REG 0x19
+#define MXL_111SF_GPO_1 0x00
+#define MXL_111SF_GPO_2 0x01
+#define MXL_111SF_GPO_3 0x02
+#define MXL_111SF_GPO_4 0x03
+#define MXL_111SF_GPO_5 0x04
+#define MXL_111SF_GPO_6 0x05
+#define MXL_111SF_GPO_7 0x06
+
+#define MXL_111SF_GPO_0_MASK 0x01
+#define MXL_111SF_GPO_1_MASK 0x02
+#define MXL_111SF_GPO_2_MASK 0x04
+#define MXL_111SF_GPO_3_MASK 0x08
+#define MXL_111SF_GPO_4_MASK 0x10
+#define MXL_111SF_GPO_5_MASK 0x20
+#define MXL_111SF_GPO_6_MASK 0x40
+
+#define V6_ATSC_CONFIG_REG 0x0A
+
+#define MXL_MODE_REG 0x03
+#define START_TUNE_REG 0x1C
+
+#define V6_IDAC_HYSTERESIS_REG 0x0B
+#define V6_IDAC_SETTINGS_REG 0x0C
+#define IDAC_MANUAL_CONTROL 1
+#define IDAC_CURRENT_SINKING_ENABLE 1
+#define IDAC_MANUAL_CONTROL_BIT_MASK 0x80
+#define IDAC_CURRENT_SINKING_BIT_MASK 0x40
+
+#define V8_SPI_MODE_REG 0xE9
+
+#define V6_DIG_RF_PWR_LSB_REG 0x46
+#define V6_DIG_RF_PWR_MSB_REG 0x47
+
+#endif /* _DVB_USB_MXL111SF_REG_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
new file mode 100644
index 000000000000..a6341058c4e7
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c
@@ -0,0 +1,476 @@
+/*
+ * mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-tuner.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_tuner_debug;
+module_param_named(debug, mxl111sf_tuner_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+ if (mxl111sf_tuner_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_tuner_state {
+ struct mxl111sf_state *mxl_state;
+
+ struct mxl111sf_tuner_config *cfg;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 *data)
+{
+ return (state->cfg->read_reg) ?
+ state->cfg->read_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state,
+ u8 addr, u8 data)
+{
+ return (state->cfg->write_reg) ?
+ state->cfg->write_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ return (state->cfg->program_regs) ?
+ state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+ -EINVAL;
+}
+
+static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return (state->cfg->top_master_ctrl) ?
+ state->cfg->top_master_ctrl(state->mxl_state, onoff) :
+ -EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = {
+ {0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3,
+ DIG_MODEINDEX, _A, _CSF, */
+ {0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */
+ {0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */
+ {0, 0, 0}
+};
+
+/* ------------------------------------------------------------------------ */
+
+static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq,
+ u8 bw)
+{
+ u8 filt_bw;
+
+ /* set channel bandwidth */
+ switch (bw) {
+ case 0: /* ATSC */
+ filt_bw = 25;
+ break;
+ case 1: /* QAM */
+ filt_bw = 69;
+ break;
+ case 6:
+ filt_bw = 21;
+ break;
+ case 7:
+ filt_bw = 42;
+ break;
+ case 8:
+ filt_bw = 63;
+ break;
+ default:
+ err("%s: invalid bandwidth setting!", __func__);
+ return NULL;
+ }
+
+ /* calculate RF channel */
+ freq /= 1000000;
+
+ freq *= 64;
+#if 0
+ /* do round */
+ freq += 0.5;
+#endif
+ /* set bandwidth */
+ mxl_phy_tune_rf[0].data = filt_bw;
+
+ /* set RF */
+ mxl_phy_tune_rf[1].data = (freq & 0xff);
+ mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff;
+
+ /* start tune */
+ return mxl_phy_tune_rf;
+}
+
+static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state)
+{
+ int ret;
+ u8 ctrl;
+#if 0
+ u16 iffcw;
+ u32 if_freq;
+#endif
+ mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)",
+ state->cfg->invert_spectrum, state->cfg->if_freq);
+
+ /* set IF polarity */
+ ctrl = state->cfg->invert_spectrum;
+
+ ctrl |= state->cfg->if_freq;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ if_freq /= 1000000;
+
+ /* do round */
+ if_freq += 0.5;
+
+ if (MXL_IF_LO == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (108 * 4096));
+ } else if (MXL_IF_HI == state->cfg->if_freq) {
+ ctrl = 0x08;
+ iffcw = (u16)(if_freq / (216 * 4096));
+ } else {
+ ctrl = 0;
+ iffcw = 0;
+ }
+
+ ctrl |= (iffcw >> 8);
+#endif
+ ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ctrl &= 0xf0;
+ ctrl |= 0x90;
+
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl);
+ if (mxl_fail(ret))
+ goto fail;
+
+#if 0
+ ctrl = iffcw & 0x00ff;
+#endif
+ ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ static struct mxl111sf_reg_ctrl_info *reg_ctrl_array;
+ int ret;
+ u8 mxl_mode;
+
+ mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw);
+
+ /* stop tune */
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* check device mode */
+ ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* Fill out registers for channel tune */
+ reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw);
+ if (!reg_ctrl_array)
+ return -EINVAL;
+
+ ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) {
+ /* IF tuner mode only */
+ mxl1x1sf_tuner_top_master_ctrl(state, 0);
+ mxl1x1sf_tuner_top_master_ctrl(state, 1);
+ mxl1x1sf_tuner_set_if_output_freq(state);
+ }
+
+ ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (state->cfg->ant_hunt)
+ state->cfg->ant_hunt(fe);
+fail:
+ return ret;
+}
+
+static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state,
+ int *rf_synth_lock,
+ int *ref_synth_lock)
+{
+ int ret;
+ u8 data;
+
+ *rf_synth_lock = 0;
+ *ref_synth_lock = 0;
+
+ ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0;
+ *rf_synth_lock = ((data & 0x0c) == 0x0c) ? 1 : 0;
+fail:
+ return ret;
+}
+
+#if 0
+static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state,
+ int onoff)
+{
+ return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG,
+ onoff ? 1 : 0);
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+ u8 bw;
+
+ mxl_dbg("()");
+
+ if (fe->ops.info.type == FE_ATSC) {
+ switch (params->u.vsb.modulation) {
+ case VSB_8:
+ case VSB_16:
+ bw = 0; /* ATSC */
+ break;
+ case QAM_64:
+ case QAM_256:
+ bw = 1; /* US CABLE */
+ break;
+ default:
+ err("%s: modulation not set!", __func__);
+ return -EINVAL;
+ }
+ } else if (fe->ops.info.type == FE_OFDM) {
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7;
+ break;
+ case BANDWIDTH_8_MHZ:
+ bw = 8;
+ break;
+ default:
+ err("%s: bandwidth not set!", __func__);
+ return -EINVAL;
+ }
+ } else {
+ err("%s: modulation type not supported!", __func__);
+ return -EINVAL;
+ }
+ ret = mxl1x1sf_tune_rf(fe, params->frequency, bw);
+ if (mxl_fail(ret))
+ goto fail;
+
+ state->frequency = params->frequency;
+ state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
+ params->u.ofdm.bandwidth : 0;
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+static int mxl111sf_tuner_init(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* wake from standby handled by usb driver */
+
+ return ret;
+}
+
+static int mxl111sf_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int ret;
+
+ /* enter standby mode handled by usb driver */
+
+ return ret;
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ int rf_locked, ref_locked, ret;
+
+ *status = 0;
+
+ ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked);
+ if (mxl_fail(ret))
+ goto fail;
+ mxl_info("%s%s", rf_locked ? "rf locked " : "",
+ ref_locked ? "ref locked" : "");
+
+ if ((rf_locked) || (ref_locked))
+ *status |= TUNER_STATUS_LOCKED;
+fail:
+ return ret;
+}
+
+static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ u8 val1, val2;
+ int ret;
+
+ *strength = 0;
+
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *strength = val1 | ((val2 & 0x07) << 8);
+fail:
+ ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *frequency = state->frequency;
+ return 0;
+}
+
+static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ *bandwidth = state->bandwidth;
+ return 0;
+}
+
+static int mxl111sf_tuner_release(struct dvb_frontend *fe)
+{
+ struct mxl111sf_tuner_state *state = fe->tuner_priv;
+ mxl_dbg("()");
+ kfree(state);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = {
+ .info = {
+ .name = "MaxLinear MxL111SF",
+#if 0
+ .frequency_min = ,
+ .frequency_max = ,
+ .frequency_step = ,
+#endif
+ },
+#if 0
+ .init = mxl111sf_tuner_init,
+ .sleep = mxl111sf_tuner_sleep,
+#endif
+ .set_params = mxl111sf_tuner_set_params,
+ .get_status = mxl111sf_tuner_get_status,
+ .get_rf_strength = mxl111sf_get_rf_strength,
+ .get_frequency = mxl111sf_tuner_get_frequency,
+ .get_bandwidth = mxl111sf_tuner_get_bandwidth,
+ .release = mxl111sf_tuner_release,
+};
+
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg)
+{
+ struct mxl111sf_tuner_state *state = NULL;
+
+ mxl_dbg("()");
+
+ state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->mxl_state = mxl_state;
+ state->cfg = cfg;
+
+ memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
new file mode 100644
index 000000000000..ff333960b184
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
@@ -0,0 +1,89 @@
+/*
+ * mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_TUNER_H__
+#define __MXL111SF_TUNER_H__
+
+#include "dvb_frontend.h"
+
+#include "mxl111sf.h"
+
+enum mxl_if_freq {
+#if 0
+ MXL_IF_LO = 0x00, /* other IF < 9MHz */
+#endif
+ MXL_IF_4_0 = 0x01, /* 4.0 MHz */
+ MXL_IF_4_5 = 0x02, /* 4.5 MHz */
+ MXL_IF_4_57 = 0x03, /* 4.57 MHz */
+ MXL_IF_5_0 = 0x04, /* 5.0 MHz */
+ MXL_IF_5_38 = 0x05, /* 5.38 MHz */
+ MXL_IF_6_0 = 0x06, /* 6.0 MHz */
+ MXL_IF_6_28 = 0x07, /* 6.28 MHz */
+ MXL_IF_7_2 = 0x08, /* 7.2 MHz */
+ MXL_IF_35_25 = 0x09, /* 35.25 MHz */
+ MXL_IF_36 = 0x0a, /* 36 MHz */
+ MXL_IF_36_15 = 0x0b, /* 36.15 MHz */
+ MXL_IF_44 = 0x0c, /* 44 MHz */
+#if 0
+ MXL_IF_HI = 0x0f, /* other IF > 35 MHz and < 45 MHz */
+#endif
+};
+
+struct mxl111sf_tuner_config {
+ enum mxl_if_freq if_freq;
+ unsigned int invert_spectrum:1;
+
+ int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+ int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+ int (*program_regs)(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+ int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff);
+ int (*ant_hunt)(struct dvb_frontend *fe);
+};
+
+/* ------------------------------------------------------------------------ */
+
+#if defined(CONFIG_DVB_USB_MXL111SF) || \
+ (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
+extern
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state,
+ struct mxl111sf_tuner_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+ struct mxl111sf_state *mxl_state
+ struct mxl111sf_tuner_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* __MXL111SF_TUNER_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
new file mode 100644
index 000000000000..3da452a1a06f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.c
@@ -0,0 +1,854 @@
+/*
+ * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/i2c.h>
+
+#include "mxl111sf.h"
+#include "mxl111sf-reg.h"
+#include "mxl111sf-phy.h"
+#include "mxl111sf-i2c.h"
+#include "mxl111sf-gpio.h"
+
+#include "mxl111sf-tuner.h"
+
+#include "lgdt3305.h"
+
+int dvb_usb_mxl111sf_debug;
+module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level "
+ "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
+
+int dvb_usb_mxl111sf_isoc;
+module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
+MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc).");
+
+#define ANT_PATH_AUTO 0
+#define ANT_PATH_EXTERNAL 1
+#define ANT_PATH_INTERNAL 2
+
+int dvb_usb_mxl111sf_rfswitch =
+#if 0
+ ANT_PATH_AUTO;
+#else
+ ANT_PATH_EXTERNAL;
+#endif
+
+module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644);
+MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define deb_info(args...) dprintk(dvb_usb_mxl111sf_debug, 0x13, args)
+#define deb_reg(args...) dprintk(dvb_usb_mxl111sf_debug, 0x08, args)
+#define deb_adv(args...) dprintk(dvb_usb_mxl111sf_debug, MXL_ADV_DBG, args)
+
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ int wo = (rbuf == NULL || rlen == 0); /* write-only */
+ int ret;
+ u8 sndbuf[1+wlen];
+
+ deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen);
+
+ memset(sndbuf, 0, 1+wlen);
+
+ sndbuf[0] = cmd;
+ memcpy(&sndbuf[1], wbuf, wlen);
+
+ ret = (wo) ? dvb_usb_generic_write(d, sndbuf, 1+wlen) :
+ dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
+ mxl_fail(ret);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#define MXL_CMD_REG_READ 0xaa
+#define MXL_CMD_REG_WRITE 0x55
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2);
+ if (mxl_fail(ret)) {
+ mxl_debug("error reading reg: 0x%02x", addr);
+ goto fail;
+ }
+
+ if (buf[0] == addr)
+ *data = buf[1];
+ else {
+ err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",
+ addr, buf[0], buf[1]);
+ ret = -EINVAL;
+ }
+
+ deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data);
+fail:
+ return ret;
+}
+
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data)
+{
+ u8 buf[] = { addr, data };
+ int ret;
+
+ deb_reg("W: (0x%02x, 0x%02x)\n", addr, data);
+
+ ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0);
+ if (mxl_fail(ret))
+ err("error writing reg: 0x%02x, val: 0x%02x", addr, data);
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data)
+{
+ int ret;
+ u8 val;
+
+ if (mask != 0xff) {
+ ret = mxl111sf_read_reg(state, addr, &val);
+#if 1
+ /* dont know why this usually errors out on the first try */
+ if (mxl_fail(ret))
+ err("error writing addr: 0x%02x, mask: 0x%02x, "
+ "data: 0x%02x, retrying...", addr, mask, data);
+
+ ret = mxl111sf_read_reg(state, addr, &val);
+#endif
+ if (mxl_fail(ret))
+ goto fail;
+ }
+ val &= ~mask;
+ val |= data;
+
+ ret = mxl111sf_write_reg(state, addr, val);
+ mxl_fail(ret);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ int i, ret = 0;
+
+ for (i = 0; ctrl_reg_info[i].addr |
+ ctrl_reg_info[i].mask |
+ ctrl_reg_info[i].data; i++) {
+
+ ret = mxl111sf_write_reg_mask(state,
+ ctrl_reg_info[i].addr,
+ ctrl_reg_info[i].mask,
+ ctrl_reg_info[i].data);
+ if (mxl_fail(ret)) {
+ err("failed on reg #%d (0x%02x)", i,
+ ctrl_reg_info[i].addr);
+ break;
+ }
+ }
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state)
+{
+ int ret;
+ u8 id, ver;
+ char *mxl_chip, *mxl_rev;
+
+ if ((state->chip_id) && (state->chip_ver))
+ return 0;
+
+ ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_id = id;
+
+ ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver);
+ if (mxl_fail(ret))
+ goto fail;
+ state->chip_ver = ver;
+
+ switch (id) {
+ case 0x61:
+ mxl_chip = "MxL101SF";
+ break;
+ case 0x63:
+ mxl_chip = "MxL111SF";
+ break;
+ default:
+ mxl_chip = "UNKNOWN MxL1X1";
+ break;
+ }
+ switch (ver) {
+ case 0x36:
+ state->chip_rev = MXL111SF_V6;
+ mxl_rev = "v6";
+ break;
+ case 0x08:
+ state->chip_rev = MXL111SF_V8_100;
+ mxl_rev = "v8_100";
+ break;
+ case 0x18:
+ state->chip_rev = MXL111SF_V8_200;
+ mxl_rev = "v8_200";
+ break;
+ default:
+ state->chip_rev = 0;
+ mxl_rev = "UNKNOWN REVISION";
+ break;
+ }
+ info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver);
+fail:
+ return ret;
+}
+
+#define get_chip_info(state) \
+({ \
+ int ___ret; \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) { \
+ mxl_debug("failed to get chip info" \
+ " on first probe attempt"); \
+ ___ret = mxl1x1sf_get_chip_info(state); \
+ if (mxl_fail(___ret)) \
+ err("failed to get chip info during probe"); \
+ else \
+ mxl_debug("probe needed a retry " \
+ "in order to succeed."); \
+ } \
+ ___ret; \
+})
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ /* power control depends on which adapter is being woken:
+ * save this for init, instead, via mxl111sf_adap_fe_init */
+ return 0;
+}
+
+static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->priv;
+ int err;
+
+ /* exit if we didnt initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ deb_info("%s()\n", __func__);
+
+ mutex_lock(&state->fe_lock);
+
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+ err("set interface failed");
+
+ err = mxl1x1sf_soft_reset(state);
+ mxl_fail(err);
+ err = mxl111sf_init_tuner_demod(state);
+ mxl_fail(err);
+ err = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+
+ mxl_fail(err);
+ mxl111sf_enable_usb_output(state);
+ mxl_fail(err);
+ mxl1x1sf_top_master_ctrl(state, 1);
+ mxl_fail(err);
+
+ if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) &&
+ (state->chip_rev > MXL111SF_V6)) {
+ mxl111sf_config_pin_mux_modes(state,
+ PIN_MUX_TS_SPI_IN_MODE_1);
+ mxl_fail(err);
+ }
+ err = mxl111sf_init_port_expander(state);
+ if (!mxl_fail(err)) {
+ state->gpio_mode = adap_state->gpio_mode;
+ err = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ mxl_fail(err);
+#if 0
+ err = fe->ops.init(fe);
+#endif
+ msleep(100); /* add short delay after enabling
+ * the demod before touching it */
+ }
+
+ return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0;
+fail:
+ return -ENODEV;
+}
+
+static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->priv;
+ int err;
+
+ /* exit if we didnt initialize the driver yet */
+ if (!state->chip_id) {
+ mxl_debug("driver not yet initialized, exit.");
+ goto fail;
+ }
+
+ deb_info("%s()\n", __func__);
+
+ err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0;
+
+ mutex_unlock(&state->fe_lock);
+
+ return err;
+fail:
+ return -ENODEV;
+}
+
+
+static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->priv;
+ int ret = 0;
+ u8 tmp;
+
+ deb_info("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+ ret = mxl111sf_config_mpeg_in(state, 1, 1,
+ adap_state->ep6_clockphase,
+ 0, 0);
+ mxl_fail(ret);
+ } else {
+ ret = mxl111sf_disable_656_port(state);
+ mxl_fail(ret);
+ }
+
+ mxl111sf_read_reg(state, 0x12, &tmp);
+ tmp &= ~0x04;
+ mxl111sf_write_reg(state, 0x12, tmp);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+ .i2c_addr = 0xb2 >> 1,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 0,
+ .qam_if_khz = 6000,
+ .vsb_if_khz = 6000,
+};
+
+static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ struct mxl111sf_adap_state *adap_state = adap->priv;
+ int ret;
+
+ deb_adv("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+ err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_ATSC;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_TUNER_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_init_port_expander(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ adap->fe[0] = dvb_attach(lgdt3305_attach,
+ &hauppauge_lgdt3305_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe[0]) {
+ adap_state->fe_init = adap->fe[0]->ops.init;
+ adap->fe[0]->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe[0]->ops.sleep;
+ adap->fe[0]->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
+static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
+ int antpath)
+{
+ return mxl111sf_idac_config(state, 1, 1,
+ (antpath == ANT_PATH_INTERNAL) ?
+ 0x3f : 0x00, 0);
+}
+
+#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \
+ err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \
+ __func__, __LINE__, \
+ (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \
+ pwr0, pwr1, pwr2, pwr3)
+
+#define ANT_HUNT_SLEEP 90
+#define ANT_EXT_TWEAK 0
+
+static int mxl111sf_ant_hunt(struct dvb_frontend *fe)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+
+ int antctrl = dvb_usb_mxl111sf_rfswitch;
+
+ u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2;
+
+ /* FIXME: must force EXTERNAL for QAM - done elsewhere */
+ mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ?
+ ANT_PATH_EXTERNAL : antctrl);
+
+ if (antctrl == ANT_PATH_AUTO) {
+#if 0
+ msleep(ANT_HUNT_SLEEP);
+#endif
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1);
+
+ mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL);
+ msleep(ANT_HUNT_SLEEP);
+ fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2);
+
+ if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) {
+ /* return with EXTERNAL enabled */
+ mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL);
+ DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ } else {
+ /* return with INTERNAL enabled */
+ DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA,
+ rxPwr0, rxPwr1, rxPwr2);
+ }
+ }
+ return 0;
+}
+
+static struct mxl111sf_tuner_config mxl_tuner_config = {
+ .if_freq = MXL_IF_6_0, /* applies to external IF output, only */
+ .invert_spectrum = 0,
+ .read_reg = mxl111sf_read_reg,
+ .write_reg = mxl111sf_write_reg,
+ .program_regs = mxl111sf_ctrl_program_regs,
+ .top_master_ctrl = mxl1x1sf_top_master_ctrl,
+ .ant_hunt = mxl111sf_ant_hunt,
+};
+
+static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+
+ deb_adv("%s()\n", __func__);
+
+ if (NULL != dvb_attach(mxl111sf_tuner_attach, adap->fe[0], state,
+ &mxl_tuner_config))
+ return 0;
+
+ return -EIO;
+}
+
+static int mxl111sf_fe_ioctl_override(struct dvb_frontend *fe,
+ unsigned int cmd, void *parg,
+ unsigned int stage)
+{
+ int err = 0;
+
+ switch (stage) {
+ case DVB_FE_IOCTL_PRE:
+
+ switch (cmd) {
+ case FE_READ_SIGNAL_STRENGTH:
+ err = fe->ops.tuner_ops.get_rf_strength(fe, parg);
+ /* If no error occurs, prevent dvb-core from handling
+ * this IOCTL, otherwise return the error */
+ if (0 == err)
+ err = 1;
+ break;
+ }
+ break;
+
+ case DVB_FE_IOCTL_POST:
+ /* no post-ioctl handling required */
+ break;
+ }
+ return err;
+};
+
+static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+struct i2c_algorithm mxl111sf_i2c_algo = {
+ .master_xfer = mxl111sf_i2c_xfer,
+ .functionality = mxl111sf_i2c_func,
+#ifdef NEED_ALGO_CONTROL
+ .algo_control = dummy_algo_control,
+#endif
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties;
+static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties;
+
+static int mxl111sf_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d = NULL;
+
+ deb_adv("%s()\n", __func__);
+
+ if (((dvb_usb_mxl111sf_isoc) &&
+ (0 == dvb_usb_device_init(intf,
+ &mxl111sf_atsc_isoc_properties,
+ THIS_MODULE, &d, adapter_nr))) ||
+ 0 == dvb_usb_device_init(intf,
+ &mxl111sf_atsc_bulk_properties,
+ THIS_MODULE, &d, adapter_nr) || 0) {
+
+ struct mxl111sf_state *state = d->priv;
+ static u8 eeprom[256];
+ struct i2c_client c;
+ int ret;
+
+ ret = get_chip_info(state);
+ if (mxl_fail(ret))
+ err("failed to get chip info during probe");
+
+ mutex_init(&state->fe_lock);
+
+ if (state->chip_rev > MXL111SF_V6)
+ mxl111sf_config_pin_mux_modes(state,
+ PIN_MUX_TS_SPI_IN_MODE_1);
+
+ c.adapter = &d->i2c_adap;
+ c.addr = 0xa0 >> 1;
+
+ ret = tveeprom_read(&c, eeprom, sizeof(eeprom));
+ if (mxl_fail(ret))
+ return 0;
+ tveeprom_hauppauge_analog(&c, &state->tv,
+ (0x84 == eeprom[0xa0]) ?
+ eeprom + 0xa0 : eeprom + 0x80);
+#if 0
+ switch (state->tv.model) {
+ case 117001:
+ case 126001:
+ case 138001:
+ break;
+ default:
+ printk(KERN_WARNING "%s: warning: "
+ "unknown hauppauge model #%d\n",
+ __func__, state->tv.model);
+ }
+#endif
+ return 0;
+ }
+ err("Your device is not yet supported by this driver. "
+ "See kernellabs.com for more info");
+ return -EINVAL;
+}
+
+static struct usb_device_id mxl111sf_table[] = {
+/* 0 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601) }, /* ATSC */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602) }, /* + */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603) }, /* ATSC+ */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604) }, /* DVBT */
+/* 5 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609) }, /* ATSC IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a) }, /* + IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c) }, /* DVBT IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653) }, /* ATSC+ */
+/*10 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701) }, /* ATSC sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702) }, /* + sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703) }, /* ATSC+ sw */
+/*15 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704) }, /* DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853) }, /* ATSC+ sw */
+/*20 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854) }, /* DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3) }, /* ATSC+ sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4) }, /* DVBT sw */
+/*25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3) }, /* ATSC+ no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4) }, /* DVBT no */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff) }, /* ATSC+ */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612) }, /* + */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613) }, /* ATSC+ */
+/*30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a) }, /* + IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b) }, /* ATSC+ IR */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757) }, /* ATSC+DVBT sw */
+ { USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767) }, /* ATSC+DVBT no */
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, mxl111sf_table);
+
+
+#define MXL111SF_EP6_BULK_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \
+ .stream = { \
+ .type = USB_BULK, \
+ .count = 5, \
+ .endpoint = 0x06, \
+ .u = { \
+ .bulk = { \
+ .buffersize = 8192, \
+ } \
+ } \
+ }
+
+/* FIXME */
+#define MXL111SF_EP6_ISOC_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \
+ .stream = { \
+ .type = USB_ISOC, \
+ .count = 5, \
+ .endpoint = 0x06, \
+ .u = { \
+ .isoc = { \
+ .framesperurb = 24, \
+ .framesize = 3072, \
+ .interval = 1, \
+ } \
+ } \
+ }
+
+#define MXL111SF_DEFAULT_DEVICE_PROPERTIES \
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
+ .usb_ctrl = DEVICE_SPECIFIC, \
+ /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), \
+ EP6 BULK transfer (atsc/qam), \
+ use usb alt setting 2 for EP4 BULK transfer (dvb-t), \
+ EP6 ISOC transfer (atsc/qam), \
+ */ \
+ .power_ctrl = mxl111sf_power_ctrl, \
+ .i2c_algo = &mxl111sf_i2c_algo, \
+ .generic_bulk_ctrl_endpoint = MXL_EP2_REG_WRITE, \
+ .generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \
+ .size_of_priv = sizeof(struct mxl111sf_state)
+
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+
+ .frontend_attach = mxl111sf_lgdt3305_frontend_attach,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP6_BULK_STREAMING_CONFIG,
+ },
+ },
+ .num_device_descs = 6,
+ .devices = {
+ { "Hauppauge 126xxx ATSC (bulk)",
+ { NULL },
+ { &mxl111sf_table[1], &mxl111sf_table[5],
+ NULL },
+ },
+ { "Hauppauge 117xxx ATSC (bulk)",
+ { NULL },
+ { &mxl111sf_table[12],
+ NULL },
+ },
+ { "Hauppauge 126xxx ATSC+ (bulk)",
+ { NULL },
+ { &mxl111sf_table[0], &mxl111sf_table[3],
+ &mxl111sf_table[7], &mxl111sf_table[9],
+ &mxl111sf_table[10], NULL },
+ },
+ { "Hauppauge 117xxx ATSC+ (bulk)",
+ { NULL },
+ { &mxl111sf_table[11], &mxl111sf_table[14],
+ &mxl111sf_table[16], &mxl111sf_table[17],
+ &mxl111sf_table[32], &mxl111sf_table[33],
+ NULL },
+ },
+ { "Hauppauge Mercury (tp-bulk)",
+ { NULL },
+ { &mxl111sf_table[19], &mxl111sf_table[21],
+ &mxl111sf_table[23], &mxl111sf_table[25],
+ &mxl111sf_table[27], NULL },
+ },
+ { "Hauppauge WinTV-Aero-M",
+ { NULL },
+ { &mxl111sf_table[29], &mxl111sf_table[31],
+ NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+
+ .frontend_attach = mxl111sf_lgdt3305_frontend_attach,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP6_ISOC_STREAMING_CONFIG,
+ },
+ },
+ .num_device_descs = 6,
+ .devices = {
+ { "Hauppauge 126xxx ATSC (isoc)",
+ { NULL },
+ { &mxl111sf_table[1], &mxl111sf_table[5],
+ NULL },
+ },
+ { "Hauppauge 117xxx ATSC (isoc)",
+ { NULL },
+ { &mxl111sf_table[12],
+ NULL },
+ },
+ { "Hauppauge 126xxx ATSC+ (isoc)",
+ { NULL },
+ { &mxl111sf_table[0], &mxl111sf_table[3],
+ &mxl111sf_table[7], &mxl111sf_table[9],
+ &mxl111sf_table[10], NULL },
+ },
+ { "Hauppauge 117xxx ATSC+ (isoc)",
+ { NULL },
+ { &mxl111sf_table[11], &mxl111sf_table[14],
+ &mxl111sf_table[16], &mxl111sf_table[17],
+ &mxl111sf_table[32], &mxl111sf_table[33],
+ NULL },
+ },
+ { "Hauppauge Mercury (tp-isoc)",
+ { NULL },
+ { &mxl111sf_table[19], &mxl111sf_table[21],
+ &mxl111sf_table[23], &mxl111sf_table[25],
+ &mxl111sf_table[27], NULL },
+ },
+ { "Hauppauge WinTV-Aero-M (tp-isoc)",
+ { NULL },
+ { &mxl111sf_table[29], &mxl111sf_table[31],
+ NULL },
+ },
+ }
+};
+
+static struct usb_driver mxl111sf_driver = {
+ .name = "dvb_usb_mxl111sf",
+ .probe = mxl111sf_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = mxl111sf_table,
+};
+
+static int __init mxl111sf_module_init(void)
+{
+ int result = usb_register(&mxl111sf_driver);
+ if (result) {
+ err("usb_register failed. Error number %d", result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit mxl111sf_module_exit(void)
+{
+ usb_deregister(&mxl111sf_driver);
+}
+
+module_init(mxl111sf_module_init);
+module_exit(mxl111sf_module_exit);
+
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h
new file mode 100644
index 000000000000..5a2c7bb386cd
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#ifndef _DVB_USB_MXL111SF_H_
+#define _DVB_USB_MXL111SF_H_
+
+#ifdef DVB_USB_LOG_PREFIX
+#undef DVB_USB_LOG_PREFIX
+#endif
+#define DVB_USB_LOG_PREFIX "mxl111sf"
+#include "dvb-usb.h"
+#include <media/tveeprom.h>
+
+#define MXL_EP1_REG_READ 1
+#define MXL_EP2_REG_WRITE 2
+#define MXL_EP3_INTERRUPT 3
+#define MXL_EP4_MPEG2 4
+#define MXL_EP5_I2S 5
+#define MXL_EP6_656 6
+#define MXL_EP6_MPEG2 6
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+enum mxl111sf_current_mode {
+ mxl_mode_dvbt = MXL_EP4_MPEG2,
+ mxl_mode_mh = MXL_EP5_I2S,
+ mxl_mode_atsc = MXL_EP6_MPEG2,
+};
+#endif
+
+enum mxl111sf_gpio_port_expander {
+ mxl111sf_gpio_hw,
+ mxl111sf_PCA9534,
+};
+
+struct mxl111sf_state {
+ struct dvb_usb_device *d;
+
+ enum mxl111sf_gpio_port_expander gpio_port_expander;
+ u8 port_expander_addr;
+
+ u8 chip_id;
+ u8 chip_ver;
+#define MXL111SF_V6 1
+#define MXL111SF_V8_100 2
+#define MXL111SF_V8_200 3
+ u8 chip_rev;
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+ enum mxl111sf_current_mode current_mode;
+#endif
+
+#define MXL_TUNER_MODE 0
+#define MXL_SOC_MODE 1
+#define MXL_DEV_MODE_MASK 0x01
+#if 1
+ int device_mode;
+#endif
+ /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),
+ EP5 BULK transfer (atsc-mh),
+ EP6 BULK transfer (atsc/qam),
+ use usb alt setting 2 for EP4 BULK transfer (dvb-t),
+ EP5 ISOC transfer (atsc-mh),
+ EP6 ISOC transfer (atsc/qam),
+ */
+ int alt_mode;
+ int gpio_mode;
+ struct tveeprom tv;
+
+ struct mutex fe_lock;
+};
+
+struct mxl111sf_adap_state {
+ int alt_mode;
+ int gpio_mode;
+ int device_mode;
+ int ep6_clockphase;
+ int (*fe_init)(struct dvb_frontend *);
+ int (*fe_sleep)(struct dvb_frontend *);
+};
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data);
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data);
+
+struct mxl111sf_reg_ctrl_info {
+ u8 addr;
+ u8 mask;
+ u8 data;
+};
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+ u8 addr, u8 mask, u8 data);
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+
+/* needed for hardware i2c functions in mxl111sf-i2c.c:
+ * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen);
+
+#define mxl_printk(kern, fmt, arg...) \
+ printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_info(fmt, arg...) \
+ mxl_printk(KERN_INFO, fmt, ##arg)
+
+extern int dvb_usb_mxl111sf_debug;
+#define mxl_debug(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define MXL_I2C_DBG 0x04
+#define MXL_ADV_DBG 0x10
+#define mxl_debug_adv(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c(fmt, arg...) \
+ if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c_adv(fmt, arg...) \
+ if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \
+ (MXL_I2C_DBG | MXL_ADV_DBG)) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* The following allows the mxl_fail() macro defined below to work
+ * in externel modules, such as mxl111sf-tuner.ko, even though
+ * dvb_usb_mxl111sf_debug is not defined within those modules */
+#ifdef __MXL111SF_TUNER_H__
+#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
+#else
+#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
+#endif
+
+#define mxl_fail(ret) \
+({ \
+ int __ret; \
+ __ret = (ret < 0); \
+ if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG)) \
+ mxl_printk(KERN_ERR, "error %d on line %d", \
+ ret, __LINE__); \
+ __ret; \
+})
+
+#endif /* _DVB_USB_MXL111SF_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
OpenPOWER on IntegriCloud