diff options
56 files changed, 485 insertions, 452 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c5cf7d7e58b2..a74a0c726134 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -58,7 +58,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info -T: SCM tree type and URL. Type is one of: git, hg, quilt. +T: SCM tree type and location. Type is one of: git, hg, quilt. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -227,6 +227,7 @@ AGPGART DRIVER P: Dave Jones M: davej@codemonkey.org.uk W: http://www.codemonkey.org.uk/projects/agp/ +T: git kernel.org:/pub/scm/linux/kernel/git/davej/agpgart.git S: Maintained AHA152X SCSI DRIVER @@ -384,6 +385,7 @@ P: David Woodhouse M: dwmw2@infradead.org L: linux-audit@redhat.com W: http://people.redhat.com/sgrubb/audit/ +T: git kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6.git S: Maintained AX.25 NETWORK LAYER @@ -432,6 +434,7 @@ L: bluez-devel@lists.sf.net W: http://bluez.sf.net W: http://www.bluez.org W: http://www.holtmann.org/linux/bluetooth/ +T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git S: Maintained BLUETOOTH RFCOMM LAYER @@ -547,6 +550,7 @@ P: Steve French M: sfrench@samba.org L: samba-technical@lists.samba.org W: http://us1.samba.org/samba/Linux_CIFS_client.html +T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git S: Supported CIRRUS LOGIC GENERIC FBDEV DRIVER @@ -608,6 +612,7 @@ P: Dave Jones M: davej@codemonkey.org.uk L: cpufreq@lists.linux.org.uk W: http://www.codemonkey.org.uk/projects/cpufreq/ +T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git S: Maintained CPUID/MSR DRIVER @@ -641,6 +646,7 @@ M: herbert@gondor.apana.org.au P: David S. Miller M: davem@davemloft.net L: linux-crypto@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained CYBERPRO FB DRIVER @@ -1185,6 +1191,7 @@ P: Bartlomiej Zolnierkiewicz M: B.Zolnierkiewicz@elka.pw.edu.pl L: linux-kernel@vger.kernel.org L: linux-ide@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git S: Maintained IDE/ATAPI CDROM DRIVER @@ -1279,6 +1286,7 @@ P: Vojtech Pavlik M: vojtech@suse.cz L: linux-input@atrey.karlin.mff.cuni.cz L: linux-joystick@atrey.karlin.mff.cuni.cz +T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git S: Maintained INOTIFY @@ -1392,6 +1400,7 @@ P: Kai Germaschewski M: kai.germaschewski@gmx.de L: isdn4linux@listserv.isdn4linux.de W: http://www.isdn4linux.de +T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git S: Maintained ISDN SUBSYSTEM (Eicon active card driver) @@ -1420,6 +1429,7 @@ P: Dave Kleikamp M: shaggy@austin.ibm.com L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ +T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git S: Supported KCONFIG @@ -1534,6 +1544,7 @@ P: Paul Mackerras M: paulus@samba.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org +T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git S: Supported LINUX FOR POWER MACINTOSH @@ -1601,6 +1612,7 @@ P: Chris Wright M: chrisw@osdl.org L: linux-security-module@wirex.com W: http://lsm.immunix.org +T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported LM83 HARDWARE MONITOR DRIVER @@ -1695,6 +1707,7 @@ P: David Woodhouse M: dwmw2@infradead.org W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org +T: git kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6.git S: Maintained MICROTEK X6 SCANNER @@ -1815,6 +1828,7 @@ M: yoshfuji@linux-ipv6.org P: Patrick McHardy M: kaber@coreworks.de L: netdev@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/davem/net-2.6.git S: Maintained IPVS @@ -1866,6 +1880,7 @@ M: aia21@cantab.net L: linux-ntfs-dev@lists.sourceforge.net L: linux-kernel@vger.kernel.org W: http://linux-ntfs.sf.net/ +T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git S: Maintained NVIDIA (RIVA) FRAMEBUFFER DRIVER @@ -2389,6 +2404,7 @@ P: Anton Blanchard M: anton@samba.org L: sparclinux@vger.kernel.org L: ultralinux@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git S: Maintained SHARP LH SUPPORT (LH7952X & LH7A40X) @@ -2527,6 +2543,7 @@ P: Adrian Bunk M: trivial@kernel.org L: linux-kernel@vger.kernel.org W: http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/ +T: git kernel.org:/pub/scm/linux/kernel/git/bunk/trivial.git S: Maintained TMS380 TOKEN-RING NETWORK DRIVER @@ -2860,6 +2877,7 @@ P: Latchesar Ionkov M: lucho@ionkov.net L: v9fs-developer@lists.sourceforge.net W: http://v9fs.sf.net +T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs-devel.git S: Maintained VIDEO FOR LINUX diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 1cb261f225d5..df6c2bcde067 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -393,13 +393,6 @@ void flush_thread(void) { struct task_struct *tsk = current; - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(tsk); - memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8); memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); /* diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index c96bea14b98f..f6bc48da4d2a 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -132,7 +132,7 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) } } - printk("PCI: Probing PCI hardware (bus %02x)\n", busnum); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL); } @@ -144,7 +144,7 @@ static int __init pcibios_init(void) struct cpuinfo_x86 *c = &boot_cpu_data; if (!raw_pci_ops) { - printk("PCI: System does not support PCI\n"); + printk(KERN_WARNING "PCI: System does not support PCI\n"); return 0; } diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c index 30b7e9b4f6a2..94331d6be7a3 100644 --- a/arch/i386/pci/direct.c +++ b/arch/i386/pci/direct.c @@ -201,7 +201,7 @@ static int __init pci_sanity_check(struct pci_raw_ops *o) return 1; } - DBG("PCI: Sanity check failed\n"); + DBG(KERN_WARNING "PCI: Sanity check failed\n"); return 0; } diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 6d6338500c3c..ed2c8c899bd3 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -221,6 +221,11 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) continue; r = &dev->resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); return -EINVAL; @@ -230,8 +235,6 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) if (r->flags & IORESOURCE_MEM) cmd |= PCI_COMMAND_MEMORY; } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; if (cmd != old_cmd) { printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 4305d2ba76f6..2e33665d9c18 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -718,13 +718,6 @@ kernel_thread_helper (int (*fn)(void *), void *arg) void flush_thread (void) { - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(current); - /* drop floating-point and debug-register state if it exists: */ current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID); ia64_drop_fpu(current); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index de69fb37c731..a5a7542a8ff3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -457,7 +457,6 @@ void flush_thread(void) if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT); #endif - kprobe_flush_task(current); #ifndef CONFIG_SMP if (last_task_used_math == current) diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/4xx_mmu.c index b7bcbc232f39..4d006aa1a0d1 100644 --- a/arch/powerpc/mm/4xx_mmu.c +++ b/arch/powerpc/mm/4xx_mmu.c @@ -110,13 +110,11 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; - spin_lock(&init_mm.page_table_lock); pmdp = pmd_offset(pgd_offset_k(v), v); pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; - spin_unlock(&init_mm.page_table_lock); v += LARGE_PAGE_SIZE_16M; p += LARGE_PAGE_SIZE_16M; @@ -127,10 +125,8 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; - spin_lock(&init_mm.page_table_lock); pmdp = pmd_offset(pgd_offset_k(v), v); pmd_val(*pmdp) = val; - spin_unlock(&init_mm.page_table_lock); v += LARGE_PAGE_SIZE_4M; p += LARGE_PAGE_SIZE_4M; diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 426c269e552e..f867bba893ca 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -287,15 +287,15 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) int prepare_hugepage_range(unsigned long addr, unsigned long len) { - int err; + int err = 0; if ( (addr+len) < addr ) return -EINVAL; - if ((addr + len) < 0x100000000UL) + if (addr < 0x100000000UL) err = open_low_hpage_areas(current->mm, LOW_ESID_MASK(addr, len)); - else + if ((addr + len) >= 0x100000000UL) err = open_high_hpage_areas(current->mm, HTLB_AREA_MASK(addr, len)); if (err) { @@ -754,9 +754,7 @@ repeat: } /* - * No need to use ldarx/stdcx here because all who - * might be updating the pte will hold the - * page_table_lock + * No need to use ldarx/stdcx here */ *ptep = __pte(new_pte & ~_PAGE_BUSY); diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 4bd7b0a70996..ed6ed2e30dac 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -495,7 +495,7 @@ EXPORT_SYMBOL(flush_icache_user_range); * We use it to preload an HPTE into the hash table corresponding to * the updated linux PTE. * - * This must always be called with the mm->page_table_lock held + * This must always be called with the pte lock held. */ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) diff --git a/arch/powerpc/mm/tlb_32.c b/arch/powerpc/mm/tlb_32.c index 6c3dc3c44c86..ad580f3742e5 100644 --- a/arch/powerpc/mm/tlb_32.c +++ b/arch/powerpc/mm/tlb_32.c @@ -149,6 +149,12 @@ void flush_tlb_mm(struct mm_struct *mm) return; } + /* + * It is safe to go down the mm's list of vmas when called + * from dup_mmap, holding mmap_sem. It would also be safe from + * unmap_region or exit_mmap, but not from vmtruncate on SMP - + * but it seems dup_mmap is the only SMP case which gets here. + */ for (mp = mm->mmap; mp != NULL; mp = mp->vm_next) flush_range(mp->vm_mm, mp->vm_start, mp->vm_end); FINISH_FLUSH; diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 53e31b834ace..859d29a0cac5 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -95,7 +95,7 @@ static void pte_free_submit(struct pte_freelist_batch *batch) void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) { - /* This is safe as we are holding page_table_lock */ + /* This is safe since tlb_gather_mmu has disabled preemption */ cpumask_t local_cpumask = cpumask_of_cpu(smp_processor_id()); struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur); @@ -206,7 +206,7 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) void pte_free_finish(void) { - /* This is safe as we are holding page_table_lock */ + /* This is safe since tlb_gather_mmu has disabled preemption */ struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur); if (*batchp == NULL) diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 5afd63e8cef7..7519fc520eb3 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -351,13 +351,6 @@ void flush_thread(void) struct task_struct *tsk = current; struct thread_info *t = current_thread_info(); - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(tsk); - if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 03204bfd17af..fa601b085eba 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -133,7 +133,7 @@ static struct kobj_type ktype_bus = { decl_subsys(bus, &ktype_bus, NULL); -/* Manually detach a device from it's associated driver. */ +/* Manually detach a device from its associated driver. */ static int driver_helper(struct device *dev, void *data) { const char *name = data; @@ -151,14 +151,13 @@ static ssize_t driver_unbind(struct device_driver *drv, int err = -ENODEV; dev = bus_find_device(bus, NULL, (void *)buf, driver_helper); - if ((dev) && - (dev->driver == drv)) { + if (dev && dev->driver == drv) { device_release_driver(dev); err = count; } - if (err) - return err; - return count; + put_device(dev); + put_bus(bus); + return err; } static DRIVER_ATTR(unbind, S_IWUSR, NULL, driver_unbind); @@ -175,16 +174,14 @@ static ssize_t driver_bind(struct device_driver *drv, int err = -ENODEV; dev = bus_find_device(bus, NULL, (void *)buf, driver_helper); - if ((dev) && - (dev->driver == NULL)) { + if (dev && dev->driver == NULL) { down(&dev->sem); err = driver_probe_device(drv, dev); up(&dev->sem); - put_device(dev); } - if (err) - return err; - return count; + put_device(dev); + put_bus(bus); + return err; } static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 3565e9795301..3b419c9a1e7e 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -62,7 +62,6 @@ void device_bind_driver(struct device * dev) * because we don't know the format of the ID structures, nor what * is to be considered a match and what is not. * - * * This function returns 1 if a match is found, an error if one * occurs (that is not -ENODEV or -ENXIO), and 0 otherwise. * @@ -158,7 +157,6 @@ static int __driver_attach(struct device * dev, void * data) driver_probe_device(drv, dev); up(&dev->sem); - return 0; } @@ -225,15 +223,15 @@ void driver_detach(struct device_driver * drv) struct device * dev; for (;;) { - spin_lock_irq(&drv->klist_devices.k_lock); + spin_lock(&drv->klist_devices.k_lock); if (list_empty(&drv->klist_devices.k_list)) { - spin_unlock_irq(&drv->klist_devices.k_lock); + spin_unlock(&drv->klist_devices.k_lock); break; } dev = list_entry(drv->klist_devices.k_list.prev, struct device, knode_driver.n_node); get_device(dev); - spin_unlock_irq(&drv->klist_devices.k_lock); + spin_unlock(&drv->klist_devices.k_lock); down(&dev->sem); if (dev->driver == drv) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 13b8a9bed66e..f7e765a1d313 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3714,12 +3714,6 @@ static int floppy_open(struct inode *inode, struct file *filp) USETF(FD_VERIFY); } - /* set underlying gendisk policy to reflect real ro/rw status */ - if (UTESTF(FD_DISK_WRITABLE)) - inode->i_bdev->bd_disk->policy = 0; - else - inode->i_bdev->bd_disk->policy = 1; - if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL))) goto out2; diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c index 2c74155aa84f..abef2acf99f5 100644 --- a/drivers/char/drm/drm_memory.c +++ b/drivers/char/drm/drm_memory.c @@ -95,7 +95,7 @@ unsigned long drm_alloc_pages(int order, int area) unsigned long addr; unsigned int sz; - address = __get_free_pages(GFP_KERNEL, order); + address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order); if (!address) return 0; diff --git a/drivers/char/drm/drm_memory_debug.h b/drivers/char/drm/drm_memory_debug.h index 4542353195bd..b370aca718d2 100644 --- a/drivers/char/drm/drm_memory_debug.h +++ b/drivers/char/drm/drm_memory_debug.h @@ -221,7 +221,7 @@ unsigned long DRM(alloc_pages) (int order, int area) { } spin_unlock(&DRM(mem_lock)); - address = __get_free_pages(GFP_KERNEL, order); + address = __get_free_pages(GFP_KERNEL|__GFP_COMP, order); if (!address) { spin_lock(&DRM(mem_lock)); ++DRM(mem_stats)[area].fail_count; diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index 0cc7c305a7f6..1713451a5cc6 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -161,7 +161,7 @@ static int mga_driver_device_is_agp(drm_device_t * dev) * device. */ - if ((pdev->device == 0x0525) + if ((pdev->device == 0x0525) && pdev->bus->self && (pdev->bus->self->vendor == 0x3388) && (pdev->bus->self->device == 0x0021)) { return 0; diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 120ee5a8ebcc..7bda7e33d2bd 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -214,8 +214,6 @@ typedef struct drm_radeon_private { int microcode_version; - int is_pci; - struct { u32 boxes; int freelist_timeouts; @@ -275,6 +273,7 @@ typedef struct drm_radeon_private { /* starting from here on, data is preserved accross an open */ uint32_t flags; /* see radeon_chip_flags */ + int is_pci; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index c81bd4bce1b8..23a9e1ea8e32 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -570,7 +570,7 @@ static int __init hdaps_init(void) hdaps_idev->evbit[0] = BIT(EV_ABS); input_set_abs_params(hdaps_idev, ABS_X, -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); - input_set_abs_params(hdaps_idev, ABS_X, + input_set_abs_params(hdaps_idev, ABS_Y, -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); input_register_device(hdaps_idev); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 6c41e25e670b..a61f5d00f10a 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -522,8 +522,15 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); + u8 reg = it87_read_value(client, IT87_REG_FAN_DIV); down(&data->update_lock); + switch (nr) { + case 0: data->fan_div[nr] = reg & 0x07; break; + case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break; + case 2: data->fan_div[nr] = (reg & 0x40) ? 3 : 1; break; + } + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); up(&data->update_lock); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index bde0cda9477e..78cdd506439f 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -451,7 +451,7 @@ static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL); static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", vid_from_reg(82, data->vid)); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, 82)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 4e9a04e1f08e..bbb3dcde146b 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -456,7 +456,9 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a (w83627thf == data->type || w83637hf == data->type)) /* use VRM9 calculation */ - data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488); + data->in_min[0] = + SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0, + 255); else /* use VRM8 (standard) calculation */ data->in_min[0] = IN_TO_REG(val); @@ -481,7 +483,9 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a (w83627thf == data->type || w83637hf == data->type)) /* use VRM9 calculation */ - data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488); + data->in_max[0] = + SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0, + 255); else /* use VRM8 (standard) calculation */ data->in_max[0] = IN_TO_REG(val); diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index c42b68d3aa24..6a61b9f286e1 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -59,7 +59,6 @@ struct slot { struct slot *next; u8 bus; u8 device; - u16 status; u32 number; u8 state; struct timer_list task_event; diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 5e582eca21d8..83c4b865718a 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -207,7 +207,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) * power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -215,8 +214,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) */ info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; - /* set power fault status for this board */ - p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -317,13 +314,10 @@ static int board_added(struct slot *p_slot) return rc; } - dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); - /* Check for a power fault */ - if (p_slot->status == 0xFF) { - /* power fault occurred, but it was benign */ + if (p_slot->hpc_ops->query_power_fault(p_slot)) { + dbg("%s: power fault detected\n", __FUNCTION__); rc = POWER_FAILURE; - p_slot->status = 0; goto err_exit; } @@ -334,8 +328,6 @@ static int board_added(struct slot *p_slot) goto err_exit; } - p_slot->status = 0; - /* * Some PCI Express root ports require fixup after hot-plug operation. */ @@ -382,9 +374,6 @@ static int remove_board(struct slot *p_slot) dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); - /* Change status to shutdown */ - p_slot->status = 0x01; - /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 2387e75da0fe..0b8b26beb163 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -750,7 +750,7 @@ static int hpc_power_on_slot(struct slot * slot) { struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u16 slot_cmd; - u16 slot_ctrl; + u16 slot_ctrl, slot_status; int retval = 0; @@ -767,6 +767,14 @@ static int hpc_power_on_slot(struct slot * slot) return -1; } + /* Clear sticky power-fault bit from previous power failures */ + hp_register_read_word(php_ctlr->pci_dev, + SLOT_STATUS(slot->ctrl->cap_base), slot_status); + slot_status &= PWR_FAULT_DETECTED; + if (slot_status) + hp_register_write_word(php_ctlr->pci_dev, + SLOT_STATUS(slot->ctrl->cap_base), slot_status); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (retval) { diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index a9b00cc2d885..6917c6cb0912 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -178,6 +178,7 @@ EXPORT_SYMBOL(pci_osc_support_set); /** * pci_osc_control_set - commit requested control to Firmware + * @handle: acpi_handle for the target ACPI object * @flags: driver's requested control bits * * Attempt to take control from Firmware on requested control bits. diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 7feb829362d6..5131d88e8c5b 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -20,9 +20,17 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/usb.h> + #include <asm/io.h> #include <asm/irq.h> -#include <linux/usb.h> + +#ifdef CONFIG_PPC_PMAC +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#endif #include "usb.h" #include "hcd.h" @@ -277,8 +285,22 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) } done: - if (retval == 0) + if (retval == 0) { dev->dev.power.power_state = PMSG_SUSPEND; + +#ifdef CONFIG_PPC_PMAC + /* Disable ASIC clocks for USB */ + if (_machine == _MACH_Pmac) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node (dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 0); + } +#endif + } + return retval; } EXPORT_SYMBOL (usb_hcd_pci_suspend); @@ -301,6 +323,18 @@ int usb_hcd_pci_resume (struct pci_dev *dev) return 0; } +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (_machine == _MACH_Pmac) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node (dev); + if (of_node) + pmac_call_feature (PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + /* NOTE: chip docs cover clean "real suspend" cases (what Linux * calls "standby", "suspend to RAM", and so on). There are also * dirty cases when swsusp fakes a suspend in "shutdown" mode. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 840727948d84..f78bd124d290 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1669,7 +1669,6 @@ int usb_suspend_device(struct usb_device *udev) return 0; #endif } -EXPORT_SYMBOL_GPL(usb_suspend_device); /* * If the USB "suspend" state is in use (rather than "global suspend"), diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index af3c05eb86fc..29f52a44b928 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -411,50 +411,39 @@ static void ehci_stop (struct usb_hcd *hcd) dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); } -static int ehci_run (struct usb_hcd *hcd) +/* one-time init, only for memory state */ +static int ehci_init(struct usb_hcd *hcd) { - struct ehci_hcd *ehci = hcd_to_ehci (hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 temp; int retval; u32 hcc_params; - int first; - - /* skip some things on restart paths */ - first = (ehci->watchdog.data == 0); - if (first) { - init_timer (&ehci->watchdog); - ehci->watchdog.function = ehci_watchdog; - ehci->watchdog.data = (unsigned long) ehci; - } + + spin_lock_init(&ehci->lock); + + init_timer(&ehci->watchdog); + ehci->watchdog.function = ehci_watchdog; + ehci->watchdog.data = (unsigned long) ehci; /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; - if (first && (retval = ehci_mem_init (ehci, GFP_KERNEL)) < 0) + if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ - hcc_params = readl (&ehci->caps->hcc_params); - if (HCC_ISOC_CACHE (hcc_params)) // full frame cache + hcc_params = readl(&ehci->caps->hcc_params); + if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 8; else // N microframes cached - ehci->i_thresh = 2 + HCC_ISOC_THRES (hcc_params); + ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); ehci->reclaim = NULL; ehci->reclaim_ready = 0; ehci->next_uframe = -1; - /* controller state: unknown --> reset */ - - /* EHCI spec section 4.1 */ - if ((retval = ehci_reset (ehci)) != 0) { - ehci_mem_cleanup (ehci); - return retval; - } - writel (ehci->periodic_dma, &ehci->regs->frame_list); - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -462,37 +451,13 @@ static int ehci_run (struct usb_hcd *hcd) * its dummy is used in hw_alt_next of many tds, to prevent the qh * from automatically advancing to the next td after short reads. */ - if (first) { - ehci->async->qh_next.qh = NULL; - ehci->async->hw_next = QH_NEXT (ehci->async->qh_dma); - ehci->async->hw_info1 = cpu_to_le32 (QH_HEAD); - ehci->async->hw_token = cpu_to_le32 (QTD_STS_HALT); - ehci->async->hw_qtd_next = EHCI_LIST_END; - ehci->async->qh_state = QH_STATE_LINKED; - ehci->async->hw_alt_next = QTD_NEXT (ehci->async->dummy->qtd_dma); - } - writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); - - /* - * hcc_params controls whether ehci->regs->segment must (!!!) - * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. - * streaming mappings for I/O buffers, like pci_map_single(), - * can return segments above 4GB, if the device allows. - * - * NOTE: the dma mask is visible through dma_supported(), so - * drivers can pass this info along ... like NETIF_F_HIGHDMA, - * Scsi_Host.highmem_io, and so forth. It's readonly to all - * host side drivers though. - */ - if (HCC_64BIT_ADDR (hcc_params)) { - writel (0, &ehci->regs->segment); -#if 0 -// this is deeply broken on almost all architectures - if (!dma_set_mask (hcd->self.controller, DMA_64BIT_MASK)) - ehci_info (ehci, "enabled 64bit DMA\n"); -#endif - } + ehci->async->qh_next.qh = NULL; + ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma); + ehci->async->hw_info1 = cpu_to_le32(QH_HEAD); + ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT); + ehci->async->hw_qtd_next = EHCI_LIST_END; + ehci->async->qh_state = QH_STATE_LINKED; + ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma); /* clear interrupt enables, set irq latency */ if (log2_irq_thresh < 0 || log2_irq_thresh > 6) @@ -507,13 +472,13 @@ static int ehci_run (struct usb_hcd *hcd) * make problems: throughput reduction (!), data errors... */ if (park) { - park = min (park, (unsigned) 3); + park = min(park, (unsigned) 3); temp |= CMD_PARK; temp |= park << 8; } - ehci_info (ehci, "park %d\n", park); + ehci_dbg(ehci, "park %d\n", park); } - if (HCC_PGM_FRAMELISTLEN (hcc_params)) { + if (HCC_PGM_FRAMELISTLEN(hcc_params)) { /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); @@ -521,16 +486,63 @@ static int ehci_run (struct usb_hcd *hcd) case 0: ehci->periodic_size = 1024; break; case 1: ehci->periodic_size = 512; break; case 2: ehci->periodic_size = 256; break; - default: BUG (); + default: BUG(); } } + ehci->command = temp; + + ehci->reboot_notifier.notifier_call = ehci_reboot; + register_reboot_notifier(&ehci->reboot_notifier); + + return 0; +} + +/* start HC running; it's halted, ehci_init() has been run (once) */ +static int ehci_run (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + int retval; + u32 temp; + u32 hcc_params; + + /* EHCI spec section 4.1 */ + if ((retval = ehci_reset(ehci)) != 0) { + unregister_reboot_notifier(&ehci->reboot_notifier); + ehci_mem_cleanup(ehci); + return retval; + } + writel(ehci->periodic_dma, &ehci->regs->frame_list); + writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); + + /* + * hcc_params controls whether ehci->regs->segment must (!!!) + * be used; it constrains QH/ITD/SITD and QTD locations. + * pci_pool consistent memory always uses segment zero. + * streaming mappings for I/O buffers, like pci_map_single(), + * can return segments above 4GB, if the device allows. + * + * NOTE: the dma mask is visible through dma_supported(), so + * drivers can pass this info along ... like NETIF_F_HIGHDMA, + * Scsi_Host.highmem_io, and so forth. It's readonly to all + * host side drivers though. + */ + hcc_params = readl(&ehci->caps->hcc_params); + if (HCC_64BIT_ADDR(hcc_params)) { + writel(0, &ehci->regs->segment); +#if 0 +// this is deeply broken on almost all architectures + if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK)) + ehci_info(ehci, "enabled 64bit DMA\n"); +#endif + } + + // Philips, Intel, and maybe others need CMD_RUN before the // root hub will detect new devices (why?); NEC doesn't - temp |= CMD_RUN; - writel (temp, &ehci->regs->command); - dbg_cmd (ehci, "init", temp); - - /* set async sleep time = 10 us ... ? */ + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); + ehci->command |= CMD_RUN; + writel (ehci->command, &ehci->regs->command); + dbg_cmd (ehci, "init", ehci->command); /* * Start, enabling full USB 2.0 functionality ... usb 1.1 devices @@ -538,26 +550,23 @@ static int ehci_run (struct usb_hcd *hcd) * involved with the root hub. (Except where one is integrated, * and there's no companion controller unless maybe for USB OTG.) */ - if (first) { - ehci->reboot_notifier.notifier_call = ehci_reboot; - register_reboot_notifier (&ehci->reboot_notifier); - } - hcd->state = HC_STATE_RUNNING; writel (FLAG_CF, &ehci->regs->configured_flag); - readl (&ehci->regs->command); /* unblock posted write */ + readl (&ehci->regs->command); /* unblock posted writes */ temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, - "USB %x.%x %s, EHCI %x.%02x, driver %s\n", + "USB %x.%x started, EHCI %x.%02x, driver %s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - first ? "initialized" : "restarted", temp >> 8, temp & 0xff, DRIVER_VERSION); writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */ - if (first) - create_debug_files (ehci); + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + create_debug_files(ehci); return 0; } @@ -636,9 +645,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) * stop that signaling. */ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); - mod_timer (&hcd->rh_timer, - ehci->reset_done [i] + 1); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); + usb_hcd_resume_root_hub(hcd); } } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 88cb4ada686e..82caf336e9b6 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -94,6 +94,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd) msleep(5); spin_lock_irq (&ehci->lock); + /* Ideally and we've got a real resume here, and no port's power + * was lost. (For PCI, that means Vaux was maintained.) But we + * could instead be restoring a swsusp snapshot -- so that BIOS was + * the last user of the controller, not reset/pm hardware keeping + * state we gave to it. + */ + /* re-init operational registers in case we lost power */ if (readl (&ehci->regs->intr_enable) == 0) { /* at least some APM implementations will try to deliver diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index dfd9bd0b1828..441c26064b44 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -27,7 +27,7 @@ /* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... * off the controller (maybe it can boot from highspeed USB disks). */ -static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) +static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap) { struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); @@ -48,7 +48,7 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) where, cap); // some BIOS versions seem buggy... // return 1; - ehci_warn (ehci, "continuing after BIOS bug...\n"); + ehci_warn(ehci, "continuing after BIOS bug...\n"); /* disable all SMIs, and clear "BIOS owns" flag */ pci_write_config_dword(pdev, where + 4, 0); pci_write_config_byte(pdev, where + 2, 0); @@ -58,96 +58,47 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) return 0; } -/* called by khubd or root hub init threads */ -static int ehci_pci_reset (struct usb_hcd *hcd) +/* called after powerup, by probe or system-pm "wakeup" */ +static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) { - struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; + int retval; unsigned count = 256/4; - spin_lock_init (&ehci->lock); - - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); - dbg_hcs_params (ehci, "reset"); - dbg_hcc_params (ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl (&ehci->caps->hcs_params); - - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - - switch (pdev->vendor) { - case PCI_VENDOR_ID_TDI: - if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; - tdi_reset (ehci); - } - break; - case PCI_VENDOR_ID_AMD: - /* AMD8111 EHCI doesn't work, according to AMD errata */ - if (pdev->device == 0x7463) { - ehci_info (ehci, "ignoring AMD8111 (errata)\n"); - return -EIO; - } - break; - case PCI_VENDOR_ID_NVIDIA: - /* NVidia reports that certain chips don't handle - * QH, ITD, or SITD addresses above 2GB. (But TD, - * data buffer, and periodic schedule are normal.) - */ - switch (pdev->device) { - case 0x003c: /* MCP04 */ - case 0x005b: /* CK804 */ - case 0x00d8: /* CK8 */ - case 0x00e8: /* CK8S */ - if (pci_set_consistent_dma_mask(pdev, - DMA_31BIT_MASK) < 0) - ehci_warn (ehci, "can't enable NVidia " - "workaround for >2GB RAM\n"); - break; - } - break; - } - - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability (pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = readl (&ehci->debug->control); - ehci_info (ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = ehci_to_hcd(ehci)->regs + temp; + temp = readl(&ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; } + } - temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); - } else - temp = 0; + temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params)); /* EHCI 0.96 and later may have "extended capabilities" */ while (temp && count--) { u32 cap; - pci_read_config_dword (to_pci_dev(hcd->self.controller), - temp, &cap); - ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); + pci_read_config_dword(pdev, temp, &cap); + ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp); switch (cap & 0xff) { case 1: /* BIOS/SMM/... handoff */ - if (bios_handoff (ehci, temp, cap) != 0) + if (bios_handoff(ehci, temp, cap) != 0) return -EOPNOTSUPP; break; case 0: /* illegal reserved capability */ - ehci_warn (ehci, "illegal capability!\n"); + ehci_dbg(ehci, "illegal capability!\n"); cap = 0; /* FALLTHROUGH */ default: /* unknown */ @@ -156,77 +107,109 @@ static int ehci_pci_reset (struct usb_hcd *hcd) temp = (cap >> 8) & 0xff; } if (!count) { - ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); + ehci_err(ehci, "bogus capabilities ... PCI problems!\n"); return -EIO; } - if (ehci_is_TDI(ehci)) - ehci_reset (ehci); - ehci_port_power (ehci, 0); + /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ + retval = pci_set_mwi(pdev); + if (!retval) + ehci_dbg(ehci, "MWI active\n"); + + ehci_port_power(ehci, 0); + + return 0; +} + +/* called by khubd or root hub (re)init threads; leaves HC in halt state */ +static int ehci_pci_reset(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + u32 temp; + int retval; + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* NOTE: only the parts below this line are PCI-specific */ + + switch (pdev->vendor) { + case PCI_VENDOR_ID_TDI: + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { + ehci->is_tdi_rh_tt = 1; + tdi_reset(ehci); + } + break; + case PCI_VENDOR_ID_AMD: + /* AMD8111 EHCI doesn't work, according to AMD errata */ + if (pdev->device == 0x7463) { + ehci_info(ehci, "ignoring AMD8111 (errata)\n"); + return -EIO; + } + break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (pci_set_consistent_dma_mask(pdev, + DMA_31BIT_MASK) < 0) + ehci_warn(ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + } + break; + } + + if (ehci_is_TDI(ehci)) + ehci_reset(ehci); /* at least the Genesys GL880S needs fixup here */ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); temp &= 0x0f; if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { - ehci_dbg (ehci, "bogus port configuration: " + ehci_dbg(ehci, "bogus port configuration: " "cc=%d x pcc=%d < ports=%d\n", HCS_N_CC(ehci->hcs_params), HCS_N_PCC(ehci->hcs_params), HCS_N_PORTS(ehci->hcs_params)); - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - - pdev = to_pci_dev(hcd->self.controller); - switch (pdev->vendor) { - case 0x17a0: /* GENESYS */ - /* GL880S: should be PORTS=2 */ - temp |= (ehci->hcs_params & ~0xf); - ehci->hcs_params = temp; - break; - case PCI_VENDOR_ID_NVIDIA: - /* NF4: should be PCC=10 */ - break; - } + switch (pdev->vendor) { + case 0x17a0: /* GENESYS */ + /* GL880S: should be PORTS=2 */ + temp |= (ehci->hcs_params & ~0xf); + ehci->hcs_params = temp; + break; + case PCI_VENDOR_ID_NVIDIA: + /* NF4: should be PCC=10 */ + break; } } - /* force HC to halt state */ - return ehci_halt (ehci); -} - -static int ehci_pci_start (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - int result = 0; - - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - u16 port_wake; - - pdev = to_pci_dev(hcd->self.controller); - - /* Serial Bus Release Number is at PCI 0x60 offset */ - pci_read_config_byte(pdev, 0x60, &ehci->sbrn); - - /* port wake capability, reported by boot firmware */ - pci_read_config_word(pdev, 0x62, &port_wake); - hcd->can_wakeup = (port_wake & 1) != 0; + /* Serial Bus Release Number is at PCI 0x60 offset */ + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); - /* help hc dma work well with cachelines */ - result = pci_set_mwi(pdev); - if (result) - ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); - } - - return ehci_run (hcd); -} + /* REVISIT: per-port wake capability (PCI 0x62) currently unused */ -/* always called by thread; normally rmmod */ + retval = ehci_pci_reinit(ehci, pdev); -static void ehci_pci_stop (struct usb_hcd *hcd) -{ - ehci_stop (hcd); + /* finish init */ + return ehci_init(hcd); } /*-------------------------------------------------------------------------*/ @@ -235,90 +218,88 @@ static void ehci_pci_stop (struct usb_hcd *hcd) /* suspend/resume, section 4.3 */ -/* These routines rely on the bus (pci, platform, etc) +/* These routines rely on the PCI bus glue * to handle powerdown and wakeup, and currently also on * transceivers that don't need any software attention to set up * the right sort of wakeup. + * Also they depend on separate root hub suspend/resume. */ -static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) +static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) { - struct ehci_hcd *ehci = hcd_to_ehci (hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ehci_bus_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - // save (PCI) FLADJ in case of Vaux power loss + // could save FLADJ in case of Vaux power loss // ... we'd only use it to handle clock skew return 0; } -static int ehci_pci_resume (struct usb_hcd *hcd) +static int ehci_pci_resume(struct usb_hcd *hcd) { - struct ehci_hcd *ehci = hcd_to_ehci (hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned port; struct usb_device *root = hcd->self.root_hub; + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = -EINVAL; - // maybe restore (PCI) FLADJ + // maybe restore FLADJ - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* If CF is clear, we lost PCI Vaux power and need to restart. */ + if (readl(&ehci->regs->configured_flag) != FLAG_CF) + goto restart; /* If any port is suspended (or owned by the companion), * we know we can/must resume the HC (and mustn't reset it). + * We just defer that to the root hub code. */ - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { + for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { u32 status; port--; - status = readl (&ehci->regs->port_status [port]); + status = readl(&ehci->regs->port_status [port]); if (!(status & PORT_POWER)) continue; - if (status & (PORT_SUSPEND | PORT_OWNER)) { - down (&hcd->self.root_hub->serialize); - retval = ehci_bus_resume (hcd); - up (&hcd->self.root_hub->serialize); - break; + if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) { + usb_hcd_resume_root_hub(hcd); + return 0; } + } + +restart: + ehci_dbg(ehci, "lost power, restarting\n"); + for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { + port--; if (!root->children [port]) continue; - dbg_port (ehci, __FUNCTION__, port + 1, status); - usb_set_device_state (root->children[port], + usb_set_device_state(root->children[port], USB_STATE_NOTATTACHED); } /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having activated BIOS during reboot. + * style "resume" having let BIOS kick in during reboot. */ - if (port == 0) { - (void) ehci_halt (ehci); - (void) ehci_reset (ehci); - (void) ehci_pci_reset (hcd); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq (&ehci->lock); - if (ehci->reclaim) - ehci->reclaim_ready = 1; - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - - /* restart; khubd will disconnect devices */ - retval = ehci_run (hcd); - - /* here we "know" root ports should always stay powered; - * but some controllers may lose all power. - */ - ehci_port_power (ehci, 1); - } + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + (void) ehci_pci_reinit(ehci, pdev); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + ehci->reclaim_ready = 1; + ehci_work(ehci, NULL); + spin_unlock_irq(&ehci->lock); + + /* restart; khubd will disconnect devices */ + retval = ehci_run(hcd); + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); return retval; } @@ -339,12 +320,12 @@ static const struct hc_driver ehci_pci_hc_driver = { * basic lifecycle operations */ .reset = ehci_pci_reset, - .start = ehci_pci_start, + .start = ehci_run, #ifdef CONFIG_PM .suspend = ehci_pci_suspend, .resume = ehci_pci_resume, #endif - .stop = ehci_pci_stop, + .stop = ehci_stop, /* * managing i/o requests and associated device resources @@ -377,7 +358,7 @@ static const struct pci_device_id pci_ids [] = { { }, { /* end: all zeroes */ } }; -MODULE_DEVICE_TABLE (pci, pci_ids); +MODULE_DEVICE_TABLE(pci, pci_ids); /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver ehci_pci_driver = { @@ -393,22 +374,22 @@ static struct pci_driver ehci_pci_driver = { #endif }; -static int __init ehci_hcd_pci_init (void) +static int __init ehci_hcd_pci_init(void) { if (usb_disabled()) return -ENODEV; - pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", + pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", hcd_name, - sizeof (struct ehci_qh), sizeof (struct ehci_qtd), - sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); + sizeof(struct ehci_qh), sizeof(struct ehci_qtd), + sizeof(struct ehci_itd), sizeof(struct ehci_sitd)); - return pci_register_driver (&ehci_pci_driver); + return pci_register_driver(&ehci_pci_driver); } -module_init (ehci_hcd_pci_init); +module_init(ehci_hcd_pci_init); -static void __exit ehci_hcd_pci_cleanup (void) +static void __exit ehci_hcd_pci_cleanup(void) { - pci_unregister_driver (&ehci_pci_driver); + pci_unregister_driver(&ehci_pci_driver); } -module_exit (ehci_hcd_pci_cleanup); +module_exit(ehci_hcd_pci_cleanup); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index a59e536441e1..5f22e6590cd1 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -14,15 +14,6 @@ * This file is licenced under the GPL. */ -#include <linux/jiffies.h> - -#ifdef CONFIG_PPC_PMAC -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/pci-bridge.h> -#include <asm/prom.h> -#endif - #ifndef CONFIG_PCI #error "This file is PCI bus glue. CONFIG_PCI must be defined." #endif @@ -115,39 +106,12 @@ ohci_pci_start (struct usb_hcd *hcd) static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) { /* root hub was already suspended */ - - /* FIXME these PMAC things get called in the wrong places. ASIC - * clocks should be turned off AFTER entering D3, and on BEFORE - * trying to enter D0. Evidently the PCI layer doesn't currently - * provide the right sort of platform hooks for this ... - */ -#ifdef CONFIG_PPC_PMAC - if (_machine == _MACH_Pmac) { - struct device_node *of_node; - - /* Disable USB PAD & cell clock */ - of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller)); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); - } -#endif /* CONFIG_PPC_PMAC */ return 0; } static int ohci_pci_resume (struct usb_hcd *hcd) { -#ifdef CONFIG_PPC_PMAC - if (_machine == _MACH_Pmac) { - struct device_node *of_node; - - /* Re-enable USB PAD & cell clock */ - of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller)); - if (of_node) - pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1); - } -#endif /* CONFIG_PPC_PMAC */ - usb_hcd_resume_root_hub(hcd); return 0; } diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index cf8cfbabefde..b2e66e3b90aa 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -199,7 +199,7 @@ static void sn9c102_release_buffers(struct sn9c102_device* cam) { if (cam->nbuffers) { rvfree(cam->frame[0].bufmem, - cam->nbuffers * cam->frame[0].buf.length); + cam->nbuffers * PAGE_ALIGN(cam->frame[0].buf.length)); cam->nbuffers = 0; } } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 61204bf7cd78..06e04b442ff1 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -475,6 +475,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, + { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, + { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ddb63df31ce6..773ea3eca086 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -128,6 +128,13 @@ #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ /* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +/* * DSS-20 Sync Station for Sony Ericsson P800 */ diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index a02fada85362..7744b8148bc5 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -46,7 +46,6 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/usb.h> -#include <linux/usb.h> #include <asm/uaccess.h> #include "usb-serial.h" diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 0a9858f69a9b..f5f47a34b168 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1118,6 +1118,15 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), +/* + * David Härdeman <david@2gen.com> + * The key makes the SCSI stack print confusing (but harmless) messages + */ +UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, + "Iomega", + "Micro Mini 1GB", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + #ifdef CONFIG_USB_STORAGE_SDDR55 UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, "Sandisk", diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 9f180096c896..6240aedb4154 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -452,13 +452,17 @@ int fb_prepare_logo(struct fb_info *info, int rotate) /* Return if no suitable logo was found */ fb_logo.logo = fb_find_logo(depth); + + if (!fb_logo.logo) { + return 0; + } if (rotate == FB_ROTATE_UR || rotate == FB_ROTATE_UD) yres = info->var.yres; else yres = info->var.xres; - if (fb_logo.logo && fb_logo.logo->height > yres) { + if (fb_logo.logo->height > yres) { fb_logo.logo = NULL; return 0; } diff --git a/fs/exec.c b/fs/exec.c index c466fec5de20..1f8a9fd2c9ed 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -668,7 +668,7 @@ static inline int de_thread(struct task_struct *tsk) if (!thread_group_leader(current)) { struct task_struct *parent; struct dentry *proc_dentry1, *proc_dentry2; - unsigned long exit_state, ptrace; + unsigned long ptrace; /* * Wait for the thread group leader to be a zombie. @@ -726,15 +726,15 @@ static inline int de_thread(struct task_struct *tsk) list_del(¤t->tasks); list_add_tail(¤t->tasks, &init_task.tasks); current->exit_signal = SIGCHLD; - exit_state = leader->exit_state; + + BUG_ON(leader->exit_state != EXIT_ZOMBIE); + leader->exit_state = EXIT_DEAD; write_unlock_irq(&tasklist_lock); spin_unlock(&leader->proc_lock); spin_unlock(¤t->proc_lock); proc_pid_flush(proc_dentry1); proc_pid_flush(proc_dentry2); - - BUG_ON(exit_state != EXIT_ZOMBIE); } /* diff --git a/fs/jffs2/debug.h b/fs/jffs2/debug.h index f193d43a8a59..162af6dfe292 100644 --- a/fs/jffs2/debug.h +++ b/fs/jffs2/debug.h @@ -82,28 +82,28 @@ do { \ printk(JFFS2_ERR_MSG_PREFIX \ " (%d) %s: " fmt, current->pid, \ - __FUNCTION__, ##__VA_ARGS__); \ + __FUNCTION__ , ##__VA_ARGS__); \ } while(0) #define JFFS2_WARNING(fmt, ...) \ do { \ printk(JFFS2_WARN_MSG_PREFIX \ " (%d) %s: " fmt, current->pid, \ - __FUNCTION__, ##__VA_ARGS__); \ + __FUNCTION__ , ##__VA_ARGS__); \ } while(0) #define JFFS2_NOTICE(fmt, ...) \ do { \ printk(JFFS2_NOTICE_MSG_PREFIX \ " (%d) %s: " fmt, current->pid, \ - __FUNCTION__, ##__VA_ARGS__); \ + __FUNCTION__ , ##__VA_ARGS__); \ } while(0) #define JFFS2_DEBUG(fmt, ...) \ do { \ printk(JFFS2_DBG_MSG_PREFIX \ " (%d) %s: " fmt, current->pid, \ - __FUNCTION__, ##__VA_ARGS__); \ + __FUNCTION__ , ##__VA_ARGS__); \ } while(0) /* diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h index 36505bb4e8cb..6183eab006d4 100644 --- a/include/asm-alpha/atomic.h +++ b/include/asm-alpha/atomic.h @@ -118,8 +118,6 @@ static __inline__ long atomic_add_return(int i, atomic_t * v) return result; } -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - static __inline__ long atomic64_add_return(long i, atomic64_t * v) { long temp, result; @@ -189,6 +187,9 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) }) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) + #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic64_dec_return(v) atomic64_sub_return(1,(v)) @@ -199,6 +200,8 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) #define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0) + #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) #define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) diff --git a/include/asm-arm/arch-iop3xx/timex.h b/include/asm-arm/arch-iop3xx/timex.h index d4187fe9a85a..472badb451c4 100644 --- a/include/asm-arm/arch-iop3xx/timex.h +++ b/include/asm-arm/arch-iop3xx/timex.h @@ -4,7 +4,7 @@ * IOP3xx architecture timex specifications */ #include <linux/config.h> - +#include <asm/hardware.h> #if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244) diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 1e6e7846824f..58a3dd9a79ec 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -135,9 +135,9 @@ extern unsigned int HPAGE_SHIFT; #define in_hugepage_area(context, addr) \ (cpu_has_feature(CPU_FTR_16M_PAGE) && \ - ( ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) || \ - ( ((addr) < 0x100000000L) && \ - ((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) ) ) + ( ( (addr) >= 0x100000000UL) \ + ? ((1 << GET_HTLB_AREA(addr)) & (context).high_htlb_areas) \ + : ((1 << GET_ESID(addr)) & (context).low_htlb_areas) ) ) #else /* !CONFIG_HUGETLB_PAGE */ diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h index 8198c3d0d007..3789fe315992 100644 --- a/include/asm-sparc64/atomic.h +++ b/include/asm-sparc64/atomic.h @@ -54,6 +54,7 @@ extern int atomic64_sub_ret(int, atomic64_t *); * other cases. */ #define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) #define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0) #define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0) diff --git a/include/asm-x86_64/atomic.h b/include/asm-x86_64/atomic.h index 0866ef67f198..50db9f39274f 100644 --- a/include/asm-x86_64/atomic.h +++ b/include/asm-x86_64/atomic.h @@ -160,8 +160,8 @@ static __inline__ int atomic_inc_and_test(atomic_t *v) /** * atomic_add_negative - add and test if negative - * @v: pointer of type atomic_t * @i: integer value to add + * @v: pointer of type atomic_t * * Atomically adds @i to @v and returns true * if the result is negative, or false when @@ -178,6 +178,31 @@ static __inline__ int atomic_add_negative(int i, atomic_t *v) return c; } +/** + * atomic_add_return - add and return + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns @i + @v + */ +static __inline__ int atomic_add_return(int i, atomic_t *v) +{ + int __i = i; + __asm__ __volatile__( + LOCK "xaddl %0, %1;" + :"=r"(i) + :"m"(v->counter), "0"(i)); + return i + __i; +} + +static __inline__ int atomic_sub_return(int i, atomic_t *v) +{ + return atomic_add_return(-i,v); +} + +#define atomic_inc_return(v) (atomic_add_return(1,v)) +#define atomic_dec_return(v) (atomic_sub_return(1,v)) + /* An 64bit atomic type */ typedef struct { volatile long counter; } atomic64_t; @@ -320,14 +345,14 @@ static __inline__ int atomic64_inc_and_test(atomic64_t *v) /** * atomic64_add_negative - add and test if negative - * @v: pointer to atomic64_t * @i: integer value to add + * @v: pointer to type atomic64_t * * Atomically adds @i to @v and returns true * if the result is negative, or false when * result is greater than or equal to zero. */ -static __inline__ long atomic64_add_negative(long i, atomic64_t *v) +static __inline__ int atomic64_add_negative(long i, atomic64_t *v) { unsigned char c; @@ -339,27 +364,30 @@ static __inline__ long atomic64_add_negative(long i, atomic64_t *v) } /** - * atomic_add_return - add and return - * @v: pointer of type atomic_t + * atomic64_add_return - add and return * @i: integer value to add + * @v: pointer to type atomic64_t * * Atomically adds @i to @v and returns @i + @v */ -static __inline__ int atomic_add_return(int i, atomic_t *v) +static __inline__ long atomic64_add_return(long i, atomic64_t *v) { - int __i = i; + long __i = i; __asm__ __volatile__( - LOCK "xaddl %0, %1;" + LOCK "xaddq %0, %1;" :"=r"(i) :"m"(v->counter), "0"(i)); return i + __i; } -static __inline__ int atomic_sub_return(int i, atomic_t *v) +static __inline__ long atomic64_sub_return(long i, atomic64_t *v) { - return atomic_add_return(-i,v); + return atomic64_add_return(-i,v); } +#define atomic64_inc_return(v) (atomic64_add_return(1,v)) +#define atomic64_dec_return(v) (atomic64_sub_return(1,v)) + #define atomic_cmpxchg(v, old, new) ((int)cmpxchg(&((v)->counter), old, new)) /** @@ -381,9 +409,6 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v) }) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_inc_return(v) (atomic_add_return(1,v)) -#define atomic_dec_return(v) (atomic_sub_return(1,v)) - /* These are x86-specific, used by some header files */ #define atomic_clear_mask(mask, addr) \ __asm__ __volatile__(LOCK "andl %0,%1" \ diff --git a/include/linux/smp.h b/include/linux/smp.h index b6069c8e1f04..9dfa3ee769ae 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -94,13 +94,7 @@ void smp_prepare_boot_cpu(void); */ #define raw_smp_processor_id() 0 #define hard_smp_processor_id() 0 - -static inline int smp_call_function(void (*func) (void *info), void *info, - int retry, int wait) -{ - return 0; -} - +#define smp_call_function(func,info,retry,wait) ({ 0; }) #define on_each_cpu(func,info,retry,wait) ({ func(info); 0; }) static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 diff --git a/include/linux/usb.h b/include/linux/usb.h index 856d232c7562..d81b050e5955 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -47,6 +47,7 @@ struct usb_driver; * @urb_list: urbs queued to this endpoint; maintained by usbcore * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) * with one or more transfer descriptors (TDs) per urb + * @kobj: kobject for sysfs info * @extra: descriptors following this endpoint in the configuration * @extralen: how many bytes of "extra" are valid * diff --git a/kernel/futex.c b/kernel/futex.c index aca8d10704f6..5872e3507f35 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -201,21 +201,6 @@ static int get_futex_key(unsigned long uaddr, union futex_key *key) * from swap. But that's a lot of code to duplicate here * for a rare case, so we simply fetch the page. */ - - /* - * Do a quick atomic lookup first - this is the fastpath. - */ - page = follow_page(mm, uaddr, FOLL_TOUCH|FOLL_GET); - if (likely(page != NULL)) { - key->shared.pgoff = - page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); - put_page(page); - return 0; - } - - /* - * Do it the general way. - */ err = get_user_pages(current, mm, uaddr, 1, 0, 0, &page, NULL); if (err >= 0) { key->shared.pgoff = diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 3bd7226d15fa..81c49a4d679e 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -36,6 +36,9 @@ void synchronize_irq(unsigned int irq) { struct irq_desc *desc = irq_desc + irq; + if (irq >= NR_IRQS) + return; + while (desc->status & IRQ_INPROGRESS) cpu_relax(); } @@ -60,6 +63,9 @@ void disable_irq_nosync(unsigned int irq) irq_desc_t *desc = irq_desc + irq; unsigned long flags; + if (irq >= NR_IRQS) + return; + spin_lock_irqsave(&desc->lock, flags); if (!desc->depth++) { desc->status |= IRQ_DISABLED; @@ -86,6 +92,9 @@ void disable_irq(unsigned int irq) { irq_desc_t *desc = irq_desc + irq; + if (irq >= NR_IRQS) + return; + disable_irq_nosync(irq); if (desc->action) synchronize_irq(irq); @@ -108,6 +117,9 @@ void enable_irq(unsigned int irq) irq_desc_t *desc = irq_desc + irq; unsigned long flags; + if (irq >= NR_IRQS) + return; + spin_lock_irqsave(&desc->lock, flags); switch (desc->depth) { case 0: @@ -163,6 +175,9 @@ int setup_irq(unsigned int irq, struct irqaction * new) unsigned long flags; int shared = 0; + if (irq >= NR_IRQS) + return -EINVAL; + if (desc->handler == &no_irq_type) return -ENOSYS; /* diff --git a/kernel/printk.c b/kernel/printk.c index ac8a08f36207..5287be83e3e7 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -956,7 +956,7 @@ int unregister_console(struct console *console) if (console_drivers == console) { console_drivers=console->next; res = 0; - } else { + } else if (console_drivers) { for (a=console_drivers->next, b=console_drivers ; a; b=a, a=b->next) { if (a == console) { diff --git a/mm/Kconfig b/mm/Kconfig index ae9ce6b73e8a..21eb51d4da8f 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -125,12 +125,10 @@ comment "Memory hotplug is currently incompatible with Software Suspend" # space can be handled with less contention: split it at this NR_CPUS. # Default to 4 for wider testing, though 8 might be more appropriate. # ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock. -# PA-RISC's debug spinlock_t is too large for the 32-bit struct page. -# ARM26 and SPARC32 and PPC64 may use one page for multiple page tables. +# PA-RISC 7xxx's spinlock_t would enlarge struct page from 32 to 44 bytes. # config SPLIT_PTLOCK_CPUS int default "4096" if ARM && !CPU_CACHE_VIPT - default "4096" if PARISC && DEBUG_SPINLOCK && !64BIT - default "4096" if ARM26 || SPARC32 || PPC64 + default "4096" if PARISC && !PA20 default "4" diff --git a/mm/truncate.c b/mm/truncate.c index 29c18f68dc35..9173ab500604 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -282,8 +282,8 @@ int invalidate_inode_pages2_range(struct address_space *mapping, * Zap the rest of the file in one hit. */ unmap_mapping_range(mapping, - page_index << PAGE_CACHE_SHIFT, - (end - page_index + 1) + (loff_t)page_index<<PAGE_CACHE_SHIFT, + (loff_t)(end - page_index + 1) << PAGE_CACHE_SHIFT, 0); did_range_unmap = 1; @@ -292,7 +292,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping, * Just zap this page */ unmap_mapping_range(mapping, - page_index << PAGE_CACHE_SHIFT, + (loff_t)page_index<<PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE, 0); } } diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index defcf6a8607c..975abe254b7a 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -366,6 +366,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) spin_lock_bh(&br->lock); br_stp_recalculate_bridge_id(br); + br_features_recompute(br); if ((br->dev->flags & IFF_UP) && (dev->flags & IFF_UP) && netif_carrier_ok(dev)) br_stp_enable_port(p); diff --git a/net/ipv4/netfilter/ip_conntrack_netlink.c b/net/ipv4/netfilter/ip_conntrack_netlink.c index 6c18a2b6d5ce..3fce91bcc0ba 100644 --- a/net/ipv4/netfilter/ip_conntrack_netlink.c +++ b/net/ipv4/netfilter/ip_conntrack_netlink.c @@ -27,6 +27,7 @@ #include <linux/errno.h> #include <linux/netlink.h> #include <linux/spinlock.h> +#include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/netfilter.h> |
