summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/qla4xxx/ql4_def.h2
-rw-r--r--drivers/scsi/qla4xxx/ql4_fw.h1
-rw-r--r--drivers/scsi/qla4xxx/ql4_glbl.h3
-rw-r--r--drivers/scsi/qla4xxx/ql4_isr.c6
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c53
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c68
6 files changed, 124 insertions, 9 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index b6f2d0152454..428802616e33 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -172,7 +172,7 @@ struct srb {
struct scsi_cmnd *cmd; /* (4) SCSI command block */
dma_addr_t dma_handle; /* (4) for unmap of single transfers */
- atomic_t ref_count; /* reference count for this srb */
+ struct kref srb_ref; /* reference count for this srb */
uint32_t fw_ddb_index;
uint8_t err_id; /* error id */
#define SRB_ERR_PORT 1 /* Request failed because "port down" */
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index dfe7b4dd3912..855226e08665 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -215,6 +215,7 @@ union external_hw_config_reg {
/* Mailbox command definitions */
#define MBOX_CMD_ABOUT_FW 0x0009
#define MBOX_CMD_PING 0x000B
+#define MBOX_CMD_ABORT_TASK 0x0015
#define MBOX_CMD_LUN_RESET 0x0016
#define MBOX_CMD_TARGET_WARM_RESET 0x0017
#define MBOX_CMD_GET_MANAGEMENT_DATA 0x001E
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 987658f5bc13..c4636f6cb3cb 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -25,6 +25,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen);
int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha);
int qla4xxx_relogin_device(struct scsi_qla_host * ha,
struct ddb_entry * ddb_entry);
+int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb);
int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
int lun);
int qla4xxx_reset_target(struct scsi_qla_host * ha,
@@ -65,7 +66,7 @@ void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha,
int qla4xxx_init_rings(struct scsi_qla_host * ha);
struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
uint32_t index);
-void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb);
+void qla4xxx_srb_compl(struct kref *ref);
int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha);
int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
uint32_t state, uint32_t conn_error);
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index ce5838eb685e..596c3031483c 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -97,7 +97,7 @@ qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
/* Place command on done queue. */
if (srb->req_sense_len == 0) {
- qla4xxx_srb_compl(ha, srb);
+ kref_put(&srb->srb_ref, qla4xxx_srb_compl);
ha->status_srb = NULL;
}
}
@@ -329,7 +329,7 @@ status_entry_exit:
/* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
if (ha->status_srb == NULL)
- qla4xxx_srb_compl(ha, srb);
+ kref_put(&srb->srb_ref, qla4xxx_srb_compl);
}
/**
@@ -393,7 +393,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
/* ETRY normally by sending it back with
* DID_BUS_BUSY */
srb->cmd->result = DID_BUS_BUSY << 16;
- qla4xxx_srb_compl(ha, srb);
+ kref_put(&srb->srb_ref, qla4xxx_srb_compl);
break;
case ET_CONTINUE:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 43581ce3a1b6..e1315cd8c261 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -762,6 +762,59 @@ exit_get_event_log:
}
/**
+ * qla4xxx_abort_task - issues Abort Task
+ * @ha: Pointer to host adapter structure.
+ * @srb: Pointer to srb entry
+ *
+ * This routine performs a LUN RESET on the specified target/lun.
+ * The caller must ensure that the ddb_entry and lun_entry pointers
+ * are valid before calling this routine.
+ **/
+int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ struct scsi_cmnd *cmd = srb->cmd;
+ int status = QLA_SUCCESS;
+ unsigned long flags = 0;
+ uint32_t index;
+
+ /*
+ * Send abort task command to ISP, so that the ISP will return
+ * request with ABORT status
+ */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ index = (unsigned long)(unsigned char *)cmd->host_scribble;
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Firmware already posted completion on response queue */
+ if (index == MAX_SRBS)
+ return status;
+
+ mbox_cmd[0] = MBOX_CMD_ABORT_TASK;
+ mbox_cmd[1] = srb->fw_ddb_index;
+ mbox_cmd[2] = index;
+ /* Immediate Command Enable */
+ mbox_cmd[5] = 0x01;
+
+ qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) {
+ status = QLA_ERROR;
+
+ DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%d: abort task FAILED: "
+ "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n",
+ ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0],
+ mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4]));
+ }
+
+ return status;
+}
+
+/**
* qla4xxx_reset_lun - issues LUN Reset
* @ha: Pointer to host adapter structure.
* @db_entry: Pointer to device database entry
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 2ca43f0ebcd6..38b1d38afca5 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -74,6 +74,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
*/
static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *));
+static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
@@ -88,6 +89,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
.proc_name = DRIVER_NAME,
.queuecommand = qla4xxx_queuecommand,
+ .eh_abort_handler = qla4xxx_eh_abort,
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
@@ -384,7 +386,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
if (!srb)
return srb;
- atomic_set(&srb->ref_count, 1);
+ kref_init(&srb->srb_ref);
srb->ha = ha;
srb->ddb = ddb_entry;
srb->cmd = cmd;
@@ -406,9 +408,11 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
CMD_SP(cmd) = NULL;
}
-void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb)
+void qla4xxx_srb_compl(struct kref *ref)
{
+ struct srb *srb = container_of(ref, struct srb, srb_ref);
struct scsi_cmnd *cmd = srb->cmd;
+ struct scsi_qla_host *ha = srb->ha;
qla4xxx_srb_free_dma(ha, srb);
@@ -887,7 +891,7 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha)
srb = qla4xxx_del_from_active_array(ha, i);
if (srb != NULL) {
srb->cmd->result = DID_RESET << 16;
- qla4xxx_srb_compl(ha, srb);
+ kref_put(&srb->srb_ref, qla4xxx_srb_compl);
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -1501,7 +1505,7 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in
/**
* qla4xxx_eh_wait_on_command - waits for command to be returned by firmware
- * @ha: actual ha whose done queue will contain the comd returned by firmware.
+ * @ha: Pointer to host adapter structure.
* @cmd: Scsi Command to wait on.
*
* This routine waits for the command to be returned by the Firmware
@@ -1585,6 +1589,62 @@ static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha,
}
/**
+ * qla4xxx_eh_abort - callback for abort task.
+ * @cmd: Pointer to Linux's SCSI command structure
+ *
+ * This routine is called by the Linux OS to abort the specified
+ * command.
+ **/
+static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
+{
+ struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
+ unsigned int id = cmd->device->id;
+ unsigned int lun = cmd->device->lun;
+ unsigned long serial = cmd->serial_number;
+ struct srb *srb = NULL;
+ int ret = SUCCESS;
+ int wait = 0;
+
+ dev_info(&ha->pdev->dev,
+ "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n",
+ ha->host_no, id, lun, cmd, serial);
+
+ srb = (struct srb *) CMD_SP(cmd);
+
+ if (!srb)
+ return SUCCESS;
+
+ kref_get(&srb->srb_ref);
+
+ if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) {
+ DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n",
+ ha->host_no, id, lun));
+ ret = FAILED;
+ } else {
+ DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n",
+ ha->host_no, id, lun));
+ wait = 1;
+ }
+
+ kref_put(&srb->srb_ref, qla4xxx_srb_compl);
+
+ /* Wait for command to complete */
+ if (wait) {
+ if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
+ DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n",
+ ha->host_no, id, lun));
+ ret = FAILED;
+ }
+ }
+
+ dev_info(&ha->pdev->dev,
+ "scsi%ld:%d:%d: Abort command - %s\n",
+ ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed");
+
+ return ret;
+}
+
+/**
* qla4xxx_eh_device_reset - callback for target reset.
* @cmd: Pointer to Linux's SCSI command structure
*
OpenPOWER on IntegriCloud