Merge branch 'for-next' of git://github.com/rydberg/linux into next

Pull in changes from Henrik: "a trivial MT documentation fix".

29 files changed, 562 insertions, 145 deletions

diff --git a/include/linux/platform_data/arm-ux500-pm.h b/include/linux/platform_data/arm-ux500-pm.h
new file mode 100644
index 000000000000..8dff64b29ec0
--- /dev/null
+++ b/include/linux/platform_data/arm-ux500-pm.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010-2013
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com> for
+ *         ST-Ericsson.
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro.
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ */
+
+#ifndef ARM_UX500_PM_H
+#define ARM_UX500_PM_H
+
+int prcmu_gic_decouple(void);
+int prcmu_gic_recouple(void);
+bool prcmu_gic_pending_irq(void);
+bool prcmu_pending_irq(void);
+bool prcmu_is_cpu_in_wfi(int cpu);
+int prcmu_copy_gic_settings(void);
+void ux500_pm_init(u32 phy_base, u32 size);
+
+#endif /* ARM_UX500_PM_H */
diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h
new file mode 100644
index 000000000000..9991aea3d577
--- /dev/null
+++ b/include/linux/platform_data/asoc-ux500-msp.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __MSP_H
+#define __MSP_H
+
+#include <linux/platform_data/dma-ste-dma40.h>
+
+enum msp_i2s_id {
+	MSP_I2S_0 = 0,
+	MSP_I2S_1,
+	MSP_I2S_2,
+	MSP_I2S_3,
+};
+
+/* Platform data structure for a MSP I2S-device */
+struct msp_i2s_platform_data {
+	enum msp_i2s_id id;
+	struct stedma40_chan_cfg *msp_i2s_dma_rx;
+	struct stedma40_chan_cfg *msp_i2s_dma_tx;
+};
+
+#endif
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
deleted file mode 100644
index ab68082fbcb0..000000000000
--- a/include/linux/platform_data/atmel-aes.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __LINUX_ATMEL_AES_H
-#define __LINUX_ATMEL_AES_H
-
-#include <linux/platform_data/dma-atmel.h>
-
-/**
- * struct aes_dma_data - DMA data for AES
- */
-struct aes_dma_data {
-	struct at_dma_slave	txdata;
-	struct at_dma_slave	rxdata;
-};
-
-/**
- * struct aes_platform_data - board-specific AES configuration
- * @dma_slave: DMA slave interface to use in data transfers.
- */
-struct aes_platform_data {
-	struct aes_dma_data	*dma_slave;
-};
-
-#endif /* __LINUX_ATMEL_AES_H */
diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h
new file mode 100644
index 000000000000..1ade657d5fc1
--- /dev/null
+++ b/include/linux/platform_data/brcmfmac-sdio.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ *
+ * Use the platform data in the following (similar) way:
+ *
+ *
+#include <brcmfmac_platform.h>
+
+
+static void brcmfmac_power_on(void)
+{
+}
+
+static void brcmfmac_power_off(void)
+{
+}
+
+static void brcmfmac_reset(void)
+{
+}
+
+static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+	.power_on		= brcmfmac_power_on,
+	.power_off		= brcmfmac_power_off,
+	.reset			= brcmfmac_reset
+};
+
+static struct platform_device brcmfmac_device = {
+	.name			= BRCMFMAC_SDIO_PDATA_NAME,
+	.id			= PLATFORM_DEVID_NONE,
+	.dev.platform_data	= &brcmfmac_sdio_pdata
+};
+
+void __init brcmfmac_init_pdata(void)
+{
+	brcmfmac_sdio_pdata.oob_irq_supported = true;
+	brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+	brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+					    IORESOURCE_IRQ_HIGHLEVEL;
+	platform_device_register(&brcmfmac_device);
+}
+ *
+ *
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ *
+ * Explanation of the platform_data fields:
+ *
+ * drive_strength: is the preferred drive_strength to be used for the SDIO
+ * pins. If 0 then a default value will be used. This is the target drive
+ * strength, the exact drive strength which will be used depends on the
+ * capabilities of the device.
+ *
+ * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+ * in-band interrupts are relatively slow and for having less overhead on
+ * interrupt processing an out of band interrupt can be used. If the HW
+ * supports this then enable this by setting this field to true and configure
+ * the oob related fields.
+ *
+ * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+ * used for registering the irq using request_irq function.
+ *
+ * power_on: This function is called by the brcmfmac when the module gets
+ * loaded. This can be particularly useful for low power devices. The platform
+ * spcific routine may for example decide to power up the complete device.
+ * If there is no use-case for this function then provide NULL.
+ *
+ * power_off: This function is called by the brcmfmac when the module gets
+ * unloaded. At this point the device can be powered down or otherwise be reset.
+ * So if an actual power_off is not supported but reset is then reset the device
+ * when this function gets called. This can be particularly useful for low power
+ * devices. If there is no use-case for this function (either power-down or
+ * reset) then provide NULL.
+ *
+ * reset: This function can get called if the device communication broke down.
+ * This functionality is particularly useful in case of SDIO type devices. It is
+ * possible to reset a dongle via sdio data interface, but it requires that
+ * this is fully functional. This function is chip/module specific and this
+ * function should return only after the complete reset has completed.
+ */
+
+#define BRCMFMAC_SDIO_PDATA_NAME	"brcmfmac_sdio"
+
+struct brcmfmac_sdio_platform_data {
+	unsigned int drive_strength;
+	bool oob_irq_supported;
+	unsigned int oob_irq_nr;
+	unsigned long oob_irq_flags;
+	void (*power_on)(void);
+	void (*power_off)(void);
+	void (*reset)(void);
+};
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
new file mode 100644
index 000000000000..23901992b9dd
--- /dev/null
+++ b/include/linux/platform_data/clk-lpss.h
@@ -0,0 +1,23 @@
+/*
+ * Intel Low Power Subsystem clocks.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CLK_LPSS_H
+#define __CLK_LPSS_H
+
+struct lpss_clk_data {
+	const char *name;
+	struct clk *clk;
+};
+
+extern int lpt_clk_init(void);
+
+#endif /* __CLK_LPSS_H */
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 3af0da1f3be5..320d9c39ea0a 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -10,7 +10,8 @@
 #ifndef __CLK_UX500_H
 #define __CLK_UX500_H
 
-void u8500_clk_init(void);
+void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
 void u9540_clk_init(void);
 void u8540_clk_init(void);
 
diff --git a/include/linux/platform_data/coda.h b/include/linux/platform_data/coda.h
new file mode 100644
index 000000000000..6ad4410d9e20
--- /dev/null
+++ b/include/linux/platform_data/coda.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2013 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef PLATFORM_CODA_H
+#define PLATFORM_CODA_H
+
+struct device;
+
+struct coda_platform_data {
+	struct device *iram_dev;
+};
+
+#endif
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h
index 798fb80b024b..bb3cd58d71e3 100644
--- a/include/linux/platform_data/cpsw.h
+++ b/include/linux/platform_data/cpsw.h
@@ -30,7 +30,7 @@ struct cpsw_platform_data {
 	u32	channels;	/* number of cpdma channels (symmetric) */
 	u32	slaves;		/* number of slave cpgmac ports */
 	struct cpsw_slave_data	*slave_data;
-	u32	cpts_active_slave; /* time stamping slave */
+	u32	active_slave; /* time stamping, ethtool and SIOCGMIIPHY slave */
 	u32	cpts_clock_mult;  /* convert input clock ticks to nanoseconds */
 	u32	cpts_clock_shift; /* convert input clock ticks to nanoseconds */
 	u32	ale_entries;	/* ale table size */
diff --git a/include/linux/platform_data/crypto-atmel.h b/include/linux/platform_data/crypto-atmel.h
new file mode 100644
index 000000000000..b46e0d9062a0
--- /dev/null
+++ b/include/linux/platform_data/crypto-atmel.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_CRYPTO_ATMEL_H
+#define __LINUX_CRYPTO_ATMEL_H
+
+#include <linux/platform_data/dma-atmel.h>
+
+/**
+ * struct crypto_dma_data - DMA data for AES/TDES/SHA
+ */
+struct crypto_dma_data {
+	struct at_dma_slave	txdata;
+	struct at_dma_slave	rxdata;
+};
+
+/**
+ * struct crypto_platform_data - board-specific AES/TDES/SHA configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ */
+struct crypto_platform_data {
+	struct crypto_dma_data	*dma_slave;
+};
+
+#endif /* __LINUX_CRYPTO_ATMEL_H */
diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
index ada401244e0b..1d36ca874cc8 100644
--- a/include/linux/platform_data/dwc3-omap.h
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -41,7 +41,3 @@ enum dwc3_omap_utmi_mode {
 	DWC3_OMAP_UTMI_MODE_HW,
 	DWC3_OMAP_UTMI_MODE_SW,
 };
-
-struct dwc3_omap_data {
-	enum dwc3_omap_utmi_mode	utmi_mode;
-};
diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h
index 1bd5244d1dcd..bf0a83b7ed9d 100644
--- a/include/linux/platform_data/elm.h
+++ b/include/linux/platform_data/elm.h
@@ -50,5 +50,5 @@ struct elm_errorvec {
 
 void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
 		struct elm_errorvec *err_vec);
-void elm_config(struct device *dev, enum bch_ecc bch_type);
+int elm_config(struct device *dev, enum bch_ecc bch_type);
 #endif /* __ELM_H */
diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h
index 03378ca84061..5c19a2a647c4 100644
--- a/include/linux/platform_data/emif_plat.h
+++ b/include/linux/platform_data/emif_plat.h
@@ -40,6 +40,7 @@
 /* Custom config requests */
 #define EMIF_CUSTOM_CONFIG_LPMODE			0x00000001
 #define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL	0x00000002
+#define EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART		0x00000004
 
 #ifndef __ASSEMBLY__
 /**
diff --git a/include/linux/platform_data/gpio-rcar.h b/include/linux/platform_data/gpio-rcar.h
new file mode 100644
index 000000000000..b253f77a7ddf
--- /dev/null
+++ b/include/linux/platform_data/gpio-rcar.h
@@ -0,0 +1,26 @@
+/*
+ * Renesas R-Car GPIO Support
+ *
+ *  Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GPIO_RCAR_H__
+#define __GPIO_RCAR_H__
+
+struct gpio_rcar_config {
+	unsigned int gpio_base;
+	unsigned int irq_base;
+	unsigned int number_of_pins;
+	const char *pctl_name;
+};
+
+#endif /* __GPIO_RCAR_H__ */
diff --git a/include/linux/platform_data/imx-iram.h b/include/linux/platform_data/imx-iram.h
deleted file mode 100644
index 022690c33702..000000000000
--- a/include/linux/platform_data/imx-iram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-
-#ifdef CONFIG_IRAM_ALLOC
-
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-
-#else
-
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
-	return -ENOMEM;
-}
-
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-	return NULL;
-}
-
-static inline void iram_free(unsigned long base, unsigned long size) {}
-
-#endif
diff --git a/include/linux/platform_data/irq-renesas-intc-irqpin.h b/include/linux/platform_data/irq-renesas-intc-irqpin.h
new file mode 100644
index 000000000000..e4cb911066a6
--- /dev/null
+++ b/include/linux/platform_data/irq-renesas-intc-irqpin.h
@@ -0,0 +1,29 @@
+/*
+ * Renesas INTC External IRQ Pin Driver
+ *
+ *  Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __IRQ_RENESAS_INTC_IRQPIN_H__
+#define __IRQ_RENESAS_INTC_IRQPIN_H__
+
+struct renesas_intc_irqpin_config {
+	unsigned int sense_bitfield_width;
+	unsigned int irq_base;
+	bool control_parent;
+};
+
+#endif /* __IRQ_RENESAS_INTC_IRQPIN_H__ */
diff --git a/include/linux/platform_data/irq-renesas-irqc.h b/include/linux/platform_data/irq-renesas-irqc.h
new file mode 100644
index 000000000000..3ae17b3e00ed
--- /dev/null
+++ b/include/linux/platform_data/irq-renesas-irqc.h
@@ -0,0 +1,27 @@
+/*
+ * Renesas IRQC Driver
+ *
+ *  Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __IRQ_RENESAS_IRQC_H__
+#define __IRQ_RENESAS_IRQC_H__
+
+struct renesas_irqc_config {
+	unsigned int irq_base;
+};
+
+#endif /* __IRQ_RENESAS_IRQC_H__ */
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 1509570d5a3f..202e290faea8 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -20,18 +20,6 @@
 #define LP55XX_CLOCK_INT	1
 #define LP55XX_CLOCK_EXT	2
 
-/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */
-#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
-#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
-#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
-#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
-#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
-#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
-#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
-#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
-#define LP5521_CLK_INT			1	/* Internal clock */
-#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
-
 struct lp55xx_led_config {
 	const char *name;
 	u8 chan_nr;
@@ -40,9 +28,9 @@ struct lp55xx_led_config {
 };
 
 struct lp55xx_predef_pattern {
-	u8 *r;
-	u8 *g;
-	u8 *b;
+	const u8 *r;
+	const u8 *g;
+	const u8 *b;
 	u8 size_r;
 	u8 size_g;
 	u8 size_b;
@@ -79,9 +67,6 @@ struct lp55xx_platform_data {
 	/* Predefined pattern data */
 	struct lp55xx_predef_pattern *patterns;
 	unsigned int num_patterns;
-
-	/* _CONFIG register */
-	u8 update_config;
 };
 
 #endif /* _LEDS_LP55XX_H */
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 20ee8b221dbd..ea3200527dd3 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -69,11 +69,6 @@ enum lp855x_chip_id {
 	LP8557,
 };
 
-enum lp855x_brightness_ctrl_mode {
-	PWM_BASED = 1,
-	REGISTER_BASED,
-};
-
 enum lp8550_brighntess_source {
 	LP8550_PWM_ONLY,
 	LP8550_I2C_ONLY = 2,
@@ -116,24 +111,18 @@ struct lp855x_rom_data {
 /**
  * struct lp855x_platform_data
  * @name : Backlight driver name. If it is not defined, default name is set.
- * @mode : brightness control by pwm or lp855x register
  * @device_control : value of DEVICE CONTROL register
  * @initial_brightness : initial value of backlight brightness
  * @period_ns : platform specific pwm period value. unit is nano.
 		Only valid when mode is PWM_BASED.
- * @load_new_rom_data :
-	0 : use default configuration data
-	1 : update values of eeprom or eprom registers on loading driver
  * @size_program : total size of lp855x_rom_data
  * @rom_data : list of new eeprom/eprom registers
  */
 struct lp855x_platform_data {
-	char *name;
-	enum lp855x_brightness_ctrl_mode mode;
+	const char *name;
 	u8 device_control;
-	int initial_brightness;
+	u8 initial_brightness;
 	unsigned int period_ns;
-	u8 load_new_rom_data;
 	int size_program;
 	struct lp855x_rom_data *rom_data;
 };
diff --git a/include/linux/platform_data/mmc-davinci.h b/include/linux/platform_data/mmc-davinci.h
index 5ba6b22ce338..9cea4ee377b5 100644
--- a/include/linux/platform_data/mmc-davinci.h
+++ b/include/linux/platform_data/mmc-davinci.h
@@ -23,9 +23,6 @@ struct davinci_mmc_config {
 	/* any additional host capabilities: OR'd in to mmc->f_caps */
 	u32     caps;
 
-	/* Version of the MMC/SD controller */
-	u8	version;
-
 	/* Number of sg segments */
 	u8	nr_sg;
 };
diff --git a/include/linux/platform_data/mmc-sdhci-s3c.h b/include/linux/platform_data/mmc-sdhci-s3c.h
new file mode 100644
index 000000000000..249f02387a35
--- /dev/null
+++ b/include/linux/platform_data/mmc-sdhci-s3c.h
@@ -0,0 +1,56 @@
+#ifndef __PLATFORM_DATA_SDHCI_S3C_H
+#define __PLATFORM_DATA_SDHCI_S3C_H
+
+struct platform_device;
+
+enum cd_types {
+	S3C_SDHCI_CD_INTERNAL,	/* use mmc internal CD line */
+	S3C_SDHCI_CD_EXTERNAL,	/* use external callback */
+	S3C_SDHCI_CD_GPIO,	/* use external gpio pin for CD line */
+	S3C_SDHCI_CD_NONE,	/* no CD line, use polling to detect card */
+	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
+};
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is a callback to the sdhci-s3c driver
+ *		 that triggers the card detection event. Callback arguments:
+ *		 dev is pointer to platform device of the host controller,
+ *		 state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ *		 sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ *		 cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+	unsigned int	max_width;
+	unsigned int	host_caps;
+	unsigned int	host_caps2;
+	unsigned int	pm_caps;
+	enum cd_types	cd_type;
+
+	int		ext_cd_gpio;
+	bool		ext_cd_gpio_invert;
+	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
+						   int state));
+	int	(*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+						      int state));
+
+	void	(*cfg_gpio)(struct platform_device *dev, int width);
+};
+
+
+#endif /* __PLATFORM_DATA_SDHCI_S3C_H */
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index 944b01dd103e..98b7925f1a2d 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -34,8 +34,6 @@ struct mv_usb_addon_irq {
 };
 
 struct mv_usb_platform_data {
-	unsigned int		clknum;
-	char			**clkname;
 	struct mv_usb_addon_irq	*id;	/* Only valid for OTG. ID pin change*/
 	struct mv_usb_addon_irq	*vbus;	/* valid for OTG/UDC. VBUS change*/
 
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index 88734e871e3a..c7285b575462 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -21,6 +21,8 @@
 #ifndef _LINUX_NTC_H
 #define _LINUX_NTC_H
 
+struct iio_channel;
+
 enum ntc_thermistor_type {
 	TYPE_NCPXXWB473,
 	TYPE_NCPXXWL333,
@@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data {
 	 * described at Documentation/hwmon/ntc_thermistor
 	 *
 	 * pullup/down_ohm: 0 for infinite / not-connected
+	 *
+	 * chan: iio_channel pointer to communicate with the ADC which the
+	 * thermistor is using for conversion of the analog values.
 	 */
-	int (*read_uV)(void);
-	unsigned int pullup_uV;
+	int (*read_uv)(struct ntc_thermistor_platform_data *);
+	unsigned int pullup_uv;
 
 	unsigned int pullup_ohm;
 	unsigned int pulldown_ohm;
 	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
+	struct iio_channel *chan;
 
 	int (*read_ohm)(void);
 };
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index ff9b0aab5281..c860c1b314c0 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -43,8 +43,6 @@ struct omap_uart_port_info {
 	int			DTR_present;
 
 	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct device *);
-	void (*set_noidle)(struct device *);
 	void (*enable_wakeup)(struct device *, bool);
 };
 
diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h
index 215574d1e81d..bdc510d03245 100644
--- a/include/linux/platform_data/serial-sccnxp.h
+++ b/include/linux/platform_data/serial-sccnxp.h
@@ -86,10 +86,6 @@ struct sccnxp_pdata {
 	const u32		mctrl_cfg[SCCNXP_MAX_UARTS];
 	/* Timer value for polling mode (usecs) */
 	const unsigned int	poll_time_us;
-	/* Called during startup */
-	void (*init)(void);
-	/* Called before finish */
-	void (*exit)(void);
 };
 
 #endif
diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
new file mode 100644
index 000000000000..92dabcaf6499
--- /dev/null
+++ b/include/linux/platform_data/si5351.h
@@ -0,0 +1,114 @@
+/*
+ * Si5351A/B/C programmable clock generator platform_data.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_SI5351_H__
+#define __LINUX_PLATFORM_DATA_SI5351_H__
+
+struct clk;
+
+/**
+ * enum si5351_variant - SiLabs Si5351 chip variant
+ * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
+ * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
+ * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
+ * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
+ */
+enum si5351_variant {
+	SI5351_VARIANT_A = 1,
+	SI5351_VARIANT_A3 = 2,
+	SI5351_VARIANT_B = 3,
+	SI5351_VARIANT_C = 4,
+};
+
+/**
+ * enum si5351_pll_src - Si5351 pll clock source
+ * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input
+ * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only)
+ */
+enum si5351_pll_src {
+	SI5351_PLL_SRC_DEFAULT = 0,
+	SI5351_PLL_SRC_XTAL = 1,
+	SI5351_PLL_SRC_CLKIN = 2,
+};
+
+/**
+ * enum si5351_multisynth_src - Si5351 multisynth clock source
+ * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0
+ * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO
+ */
+enum si5351_multisynth_src {
+	SI5351_MULTISYNTH_SRC_DEFAULT = 0,
+	SI5351_MULTISYNTH_SRC_VCO0 = 1,
+	SI5351_MULTISYNTH_SRC_VCO1 = 2,
+};
+
+/**
+ * enum si5351_clkout_src - Si5351 clock output clock source
+ * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N
+ * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4)
+ *                                or 4 (N>=4)
+ * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL
+ * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only)
+ */
+enum si5351_clkout_src {
+	SI5351_CLKOUT_SRC_DEFAULT = 0,
+	SI5351_CLKOUT_SRC_MSYNTH_N = 1,
+	SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2,
+	SI5351_CLKOUT_SRC_XTAL = 3,
+	SI5351_CLKOUT_SRC_CLKIN = 4,
+};
+
+/**
+ * enum si5351_drive_strength - Si5351 clock output drive strength
+ * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config
+ * @SI5351_DRIVE_2MA: 2mA clock output drive strength
+ * @SI5351_DRIVE_4MA: 4mA clock output drive strength
+ * @SI5351_DRIVE_6MA: 6mA clock output drive strength
+ * @SI5351_DRIVE_8MA: 8mA clock output drive strength
+ */
+enum si5351_drive_strength {
+	SI5351_DRIVE_DEFAULT = 0,
+	SI5351_DRIVE_2MA = 2,
+	SI5351_DRIVE_4MA = 4,
+	SI5351_DRIVE_6MA = 6,
+	SI5351_DRIVE_8MA = 8,
+};
+
+/**
+ * struct si5351_clkout_config - Si5351 clock output configuration
+ * @clkout: clkout number
+ * @multisynth_src: multisynth source clock
+ * @clkout_src: clkout source clock
+ * @pll_master: if true, clkout can also change pll rate
+ * @drive: output drive strength
+ * @rate: initial clkout rate, or default if 0
+ */
+struct si5351_clkout_config {
+	enum si5351_multisynth_src multisynth_src;
+	enum si5351_clkout_src clkout_src;
+	enum si5351_drive_strength drive;
+	bool pll_master;
+	unsigned long rate;
+};
+
+/**
+ * struct si5351_platform_data - Platform data for the Si5351 clock driver
+ * @variant: Si5351 chip variant
+ * @clk_xtal: xtal input clock
+ * @clk_clkin: clkin input clock
+ * @pll_src: array of pll source clock setting
+ * @clkout: array of clkout configuration
+ */
+struct si5351_platform_data {
+	enum si5351_variant variant;
+	struct clk *clk_xtal;
+	struct clk *clk_clkin;
+	enum si5351_pll_src pll_src[2];
+	struct si5351_clkout_config clkout[8];
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index ceba18d23a5a..8447f634c7f5 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -11,6 +11,8 @@
 #ifndef __S3C64XX_PLAT_SPI_H
 #define __S3C64XX_PLAT_SPI_H
 
+#include <linux/dmaengine.h>
+
 struct platform_device;
 
 /**
@@ -38,6 +40,7 @@ struct s3c64xx_spi_info {
 	int src_clk_nr;
 	int num_cs;
 	int (*cfg_gpio)(void);
+	dma_filter_fn filter;
 };
 
 /**
diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h
index c256c595be5e..c256c595be5e 100644
--- a/include/linux/platform_data/usb-exynos.h
+++ b/include/linux/platform_data/usb-ohci-exynos.h
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
deleted file mode 100644
index 7f399c370fe0..000000000000
--- a/include/linux/platform_data/video-vt8500lcdfb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
diff --git a/include/linux/platform_data/video_s3c.h b/include/linux/platform_data/video_s3c.h
new file mode 100644
index 000000000000..48883995f47f
--- /dev/null
+++ b/include/linux/platform_data/video_s3c.h
@@ -0,0 +1,54 @@
+#ifndef __PLATFORM_DATA_VIDEO_S3C
+#define __PLATFORM_DATA_VIDEO_S3C
+
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN	(5)
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @xres     : The window X size.
+ * @yres     : The window Y size.
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+	unsigned short		default_bpp;
+	unsigned short		max_bpp;
+	unsigned short		xres;
+	unsigned short		yres;
+	unsigned short		virtual_x;
+	unsigned short		virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *		the data from the display system to the connected display
+ *		device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @vtiming: Video timing when connected to a RGB type panel.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+	void	(*setup_gpio)(void);
+
+	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
+	struct fb_videomode     *vtiming;
+
+	u32			 vidcon0;
+	u32			 vidcon1;
+};
+
+#endif