summaryrefslogtreecommitdiffstats
path: root/include/asm-mips
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@linux-mips.org>2005-02-22 21:49:17 +0000
committerRalf Baechle <ralf@linux-mips.org>2005-10-29 19:30:43 +0100
commit4912ba72d6e27d0f19ec062ffd00a8c0165a2f67 (patch)
tree6d72de32927d245e31e63013566807a24ae0ec12 /include/asm-mips
parentb727a60258730b331519fedda503a8da78638791 (diff)
downloadtalos-obmc-linux-4912ba72d6e27d0f19ec062ffd00a8c0165a2f67.tar.gz
talos-obmc-linux-4912ba72d6e27d0f19ec062ffd00a8c0165a2f67.zip
Define mem_*() I/O accessory functions that preserve byte addresses.
Add missing ____raw_*q() functions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'include/asm-mips')
-rw-r--r--include/asm-mips/io.h46
1 files changed, 27 insertions, 19 deletions
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 1f2fe11f4124..644c085e29f3 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -34,7 +34,7 @@
#undef CONF_SLOWDOWN_IO
/*
- * Raw operations are never swapped in software. Otoh values that raw
+ * Raw operations are never swapped in software. OTOH values that raw
* operations are working on may or may not have been swapped by the bus
* hardware. An example use would be for flash memory that's used for
* execute in place.
@@ -43,45 +43,53 @@
# define __raw_ioswabw(x) (x)
# define __raw_ioswabl(x) (x)
# define __raw_ioswabq(x) (x)
+# define ____raw_ioswabq(x) (x)
/*
* Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
* less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
+# define mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
+# define mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
+# define mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
+# define mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
+# define mem_ioswabb(x) (x)
# define ioswabw(x) (x)
+# define mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
+# define mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
+# define mem_ioswabq(x) cpu_to_le32(x)
#endif
-/*
- * Native bus accesses never swapped.
- */
-#define bus_ioswabb(x) (x)
-#define bus_ioswabw(x) (x)
-#define bus_ioswabl(x) (x)
-#define bus_ioswabq(x) (x)
-
-#define __bus_ioswabq bus_ioswabq
-
#define IO_SPACE_LIMIT 0xffff
/*
@@ -388,15 +396,15 @@ __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
#define BUILDIO(bwlq, type) \
\
-__BUILD_MEMORY_PFX(, bwlq, type) \
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
-__BUILD_MEMORY_PFX(bus_, bwlq, type) \
+__BUILD_MEMORY_PFX(, bwlq, type) \
+__BUILD_MEMORY_PFX(mem_, bwlq, type) \
__BUILD_IOPORT_PFX(, bwlq, type) \
-__BUILD_IOPORT_PFX(__raw_, bwlq, type)
+__BUILD_IOPORT_PFX(mem_, bwlq, type)
#define __BUILDIO(bwlq, type) \
\
-__BUILD_MEMORY_SINGLE(__bus_, bwlq, type, 0)
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
BUILDIO(b, u8)
BUILDIO(w, u16)
@@ -424,7 +432,7 @@ static inline void writes##bwlq(volatile void __iomem *mem, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
+ mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
@@ -435,7 +443,7 @@ static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
+ *__addr = mem_read##bwlq(mem); \
__addr++; \
} \
}
@@ -448,7 +456,7 @@ static inline void outs##bwlq(unsigned long port, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
- __raw_out##bwlq(*__addr, port); \
+ mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
@@ -459,7 +467,7 @@ static inline void ins##bwlq(unsigned long port, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
- *__addr = __raw_in##bwlq(port); \
+ *__addr = mem_in##bwlq(port); \
__addr++; \
} \
}
OpenPOWER on IntegriCloud