summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndrew Patterson <andrew.patterson@hp.com>2009-02-20 16:04:59 -0700
committerJesse Barnes <jbarnes@hobbes.lan>2009-02-24 09:47:46 -0800
commit1f9f13c8d59c1d8da1a602b71d1ab96d1d37d69e (patch)
treeae964f6880e62dd7b233d88933b086b843ff0bdd /drivers
parentdbc7e1e567ef8cfc4b792ef6acb51d4ceb15746a (diff)
downloadtalos-obmc-linux-1f9f13c8d59c1d8da1a602b71d1ab96d1d37d69e.tar.gz
talos-obmc-linux-1f9f13c8d59c1d8da1a602b71d1ab96d1d37d69e.zip
PCI: Enable PCIe AER only after checking firmware support
The PCIe port driver currently sets the PCIe AER error reporting bits for any root or switch port without first checking to see if firmware will grant control. This patch moves setting these bits to the AER service driver aer_enable_port routine. The bits are then set for the root port and any downstream switch ports after the check for firmware support (aer_osc_setup) is made. The patch also unsets the bits in a similar fashion when the AER service driver is unloaded. Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pci/pcie/aer/aerdrv_core.c48
-rw-r--r--drivers/pci/pcie/portdrv_pci.c2
2 files changed, 39 insertions, 11 deletions
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index aac7006949f1..d0c973685868 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -108,6 +108,34 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
}
#endif /* 0 */
+
+static void set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+ bool enable = *((bool *)data);
+
+ if (dev->pcie_type != PCIE_RC_PORT &&
+ dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+ dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+ return;
+
+ if (enable)
+ pci_enable_pcie_error_reporting(dev);
+ else
+ pci_disable_pcie_error_reporting(dev);
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+ bool enable)
+{
+ set_device_error_reporting(dev, &enable);
+ pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+}
+
static int find_device_iter(struct device *device, void *data)
{
struct pci_dev *dev;
@@ -525,15 +553,11 @@ void aer_enable_rootport(struct aer_rpc *rpc)
pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, &reg32);
pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
- /* Enable Root Port device reporting error itself */
- pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, &reg16);
- reg16 = reg16 |
- PCI_EXP_DEVCTL_CERE |
- PCI_EXP_DEVCTL_NFERE |
- PCI_EXP_DEVCTL_FERE |
- PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
- reg16);
+ /*
+ * Enable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, true);
/* Enable Root Port's interrupt in response to error messages */
pci_write_config_dword(pdev,
@@ -553,6 +577,12 @@ static void disable_root_aer(struct aer_rpc *rpc)
u32 reg32;
int pos;
+ /*
+ * Disable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, false);
+
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
/* Disable Root's interrupt in response to error messages */
pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index f9b874eaeb9f..248b4db91552 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -97,8 +97,6 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
pcie_portdrv_save_config(dev);
- pci_enable_pcie_error_reporting(dev);
-
return 0;
}
OpenPOWER on IntegriCloud