diff options
| author | Heiko Stuebner <heiko@sntech.de> | 2017-03-09 07:41:16 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-03-14 10:48:11 +0800 |
| commit | 09498087f922bb623b66db9e89c6fd11a3799867 (patch) | |
| tree | 18c24d819f0d40d4f74dbaf187b9a9c7f4cebd4c /drivers/tty | |
| parent | 4495c08e84729385774601b5146d51d9e5849f81 (diff) | |
| download | talos-obmc-linux-09498087f922bb623b66db9e89c6fd11a3799867.tar.gz talos-obmc-linux-09498087f922bb623b66db9e89c6fd11a3799867.zip | |
serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
clk_round_rate returns a signed long and may possibly return errors
in it, for example if there is no possible rate.
Till now dw8250_set_termios ignored any error, the signednes and would
just use the value as input to clk_set_rate. This of course falls apart
if there is an actual error, so check for errors and only try to set
a rate if the value is actually valid.
This turned up on some Rockchip platforms after commit
6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used")
enabled set_termios callback in all cases, not only ACPI.
Fixes: 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 6ee55a2d47bb..223ac234ddb2 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -257,7 +257,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, { unsigned int baud = tty_termios_baud_rate(termios); struct dw8250_data *d = p->private_data; - unsigned int rate; + long rate; int ret; if (IS_ERR(d->clk) || !old) @@ -265,7 +265,10 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, baud * 16); - ret = clk_set_rate(d->clk, rate); + if (rate < 0) + ret = rate; + else + ret = clk_set_rate(d->clk, rate); clk_prepare_enable(d->clk); if (!ret) |
