summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/fnic/fnic_res.h
diff options
context:
space:
mode:
authorJoe Eykholt <jeykholt@cisco.com>2009-11-03 11:49:22 -0800
committerJames Bottomley <James.Bottomley@suse.de>2009-12-04 12:01:19 -0600
commit78112e5558064cb4d2e355aed87b2036fcdfe3dd (patch)
treedf34a54d3dcfb503621e3cdd64b22dc173a6722e /drivers/scsi/fnic/fnic_res.h
parent386309ce927a308d7742a6fb24a536d3383fbd49 (diff)
downloadtalos-obmc-linux-78112e5558064cb4d2e355aed87b2036fcdfe3dd.tar.gz
talos-obmc-linux-78112e5558064cb4d2e355aed87b2036fcdfe3dd.zip
[SCSI] fnic: Add FIP support to the fnic driver
Use libfcoe as a common FIP implementation with fcoe. FIP or non-FIP mode is fully automatic if the firmware supports and enables it. Even if FIP is not supported, this uses libfcoe for the non-FIP handling of FLOGI and its response. Use the new lport_set_port_id() notification to capture successful FLOGI responses and port_id resets. While transitioning between Ethernet and FC mode, all rx and tx FC frames are queued. In Ethernet mode, all frames are passed to the exchange manager to capture FLOGI responses. Change to set data_src_addr to the ctl_src_addr whenever it would have previously been zero because we're not logged in. This seems safer so we'll never send a frame with a 0 source MAC. This also eliminates a special case for sending FLOGI frames. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/fnic/fnic_res.h')
-rw-r--r--drivers/scsi/fnic/fnic_res.h50
1 files changed, 50 insertions, 0 deletions
diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h
index 88c4471c18f0..ef8aaf2156dd 100644
--- a/drivers/scsi/fnic/fnic_res.h
+++ b/drivers/scsi/fnic/fnic_res.h
@@ -51,6 +51,31 @@ static inline void fnic_queue_wq_desc(struct vnic_wq *wq,
vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop);
}
+static inline void fnic_queue_wq_eth_desc(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len,
+ int vlan_tag_insert,
+ unsigned int vlan_tag,
+ int cq_entry)
+{
+ struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
+
+ wq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ (u16)len,
+ 0, /* mss_or_csum_offset */
+ 0, /* fc_eof */
+ 0, /* offload_mode */
+ 1, /* eop */
+ (u8)cq_entry,
+ 0, /* fcoe_encap */
+ (u8)vlan_tag_insert,
+ (u16)vlan_tag,
+ 0 /* loopback */);
+
+ vnic_wq_post(wq, os_buf, dma_addr, len, 1, 1);
+}
+
static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq,
u32 req_id,
u32 lunmap_id, u8 spl_flags,
@@ -134,12 +159,37 @@ static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq,
desc->hdr.tag.u.req_id = req_id; /* id for this request */
desc->u.flogi_reg.format = format;
+ desc->u.flogi_reg._resvd = 0;
hton24(desc->u.flogi_reg.s_id, s_id);
memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN);
vnic_wq_copy_post(wq);
}
+static inline void fnic_queue_wq_copy_desc_fip_reg(struct vnic_wq_copy *wq,
+ u32 req_id, u32 s_id,
+ u8 *fcf_mac, u8 *ha_mac,
+ u32 r_a_tov, u32 e_d_tov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_FLOGI_FIP_REG; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.flogi_fip_reg._resvd0 = 0;
+ hton24(desc->u.flogi_fip_reg.s_id, s_id);
+ memcpy(desc->u.flogi_fip_reg.fcf_mac, fcf_mac, ETH_ALEN);
+ desc->u.flogi_fip_reg._resvd1 = 0;
+ desc->u.flogi_fip_reg.r_a_tov = r_a_tov;
+ desc->u.flogi_fip_reg.e_d_tov = e_d_tov;
+ memcpy(desc->u.flogi_fip_reg.ha_mac, ha_mac, ETH_ALEN);
+ desc->u.flogi_fip_reg._resvd2 = 0;
+
+ vnic_wq_copy_post(wq);
+}
+
static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq,
u32 req_id)
{
OpenPOWER on IntegriCloud