summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
diff options
context:
space:
mode:
authorGrygorii Strashko <grygorii.strashko@ti.com>2017-10-03 12:00:49 -0500
committerLinus Walleij <linus.walleij@linaro.org>2017-10-08 02:32:59 +0200
commit845e405e5e6c9dc9ed10306a4b5bfeaefebc2e84 (patch)
treef61ce31eb68864d28a5c40142219b99b4d82afb7 /drivers/pinctrl
parent83b31c2a5fdd4fb3a4ec84c59a962e816d0bc9de (diff)
downloadtalos-obmc-linux-845e405e5e6c9dc9ed10306a4b5bfeaefebc2e84.tar.gz
talos-obmc-linux-845e405e5e6c9dc9ed10306a4b5bfeaefebc2e84.zip
pinctrl: cherryview: fix issues caused by dynamic gpio irqs mapping
New GPIO IRQs are allocated and mapped dynamically by default when GPIO IRQ infrastructure is used by cherryview-pinctrl driver. This causes issues on some Intel platforms [1][2] with broken BIOS which hardcodes Linux IRQ numbers in their ACPI tables. On such platforms cherryview-pinctrl driver should allocate and map all GPIO IRQs at probe time. Side effect - "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n" can be seen at boot log. NOTE. It still may fail if boot sequence will changed and some interrupt controller will be probed before cherryview-pinctrl which will shift Linux IRQ numbering (expected with CONFIG_SPARCE_IRQ enabled). [1] https://bugzilla.kernel.org/show_bug.cgi?id=194945 [2] https://lkml.org/lkml/2017/9/28/153 Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Chris Gorman <chrisjohgorman@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Chris Gorman <chrisjohgorman@gmail.com> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Chris Gorman <chrisjohgorman@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/intel/pinctrl-cherryview.c14
1 files changed, 13 insertions, 1 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 04e929fd0ffe..fadbca907c7c 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1577,6 +1577,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
struct gpio_chip *chip = &pctrl->chip;
bool need_valid_mask = !dmi_check_system(chv_no_valid_mask);
int ret, i, offset;
+ int irq_base;
*chip = chv_gpio_chip;
@@ -1622,7 +1623,18 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
/* Clear all interrupts */
chv_writel(0xffff, pctrl->regs + CHV_INTSTAT);
- ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0,
+ if (!need_valid_mask) {
+ irq_base = devm_irq_alloc_descs(pctrl->dev, -1, 0,
+ chip->ngpio, NUMA_NO_NODE);
+ if (irq_base < 0) {
+ dev_err(pctrl->dev, "Failed to allocate IRQ numbers\n");
+ return irq_base;
+ }
+ } else {
+ irq_base = 0;
+ }
+
+ ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, irq_base,
handle_bad_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(pctrl->dev, "failed to add IRQ chip\n");
OpenPOWER on IntegriCloud