[RT2x00]: add driver for Ralink wireless hardware

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1689 insertions, 0 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
new file mode 100644
index 000000000000..38e2188937c5
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -0,0 +1,1689 @@
+/*
+	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2400pci
+	Abstract: rt2400pci device specific routines.
+	Supported chipsets: RT2460.
+ */
+
+/*
+ * Set enviroment defines for rt2x00.h
+ */
+#define DRV_NAME "rt2400pci"
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rt2x00.h"
+#include "rt2x00pci.h"
+#include "rt2400pci.h"
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2x00pci_register_read and rt2x00pci_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ */
+static u32 rt2400pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
+		if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
+			break;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	return reg;
+}
+
+static void rt2400pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
+				const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	/*
+	 * Wait until the BBP becomes ready.
+	 */
+	reg = rt2400pci_bbp_check(rt2x00dev);
+	if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
+		ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
+		return;
+	}
+
+	/*
+	 * Write the data into the BBP.
+	 */
+	reg = 0;
+	rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
+	rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
+	rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
+	rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
+
+	rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
+}
+
+static void rt2400pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	/*
+	 * Wait until the BBP becomes ready.
+	 */
+	reg = rt2400pci_bbp_check(rt2x00dev);
+	if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
+		ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
+		return;
+	}
+
+	/*
+	 * Write the request into the BBP.
+	 */
+	reg = 0;
+	rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
+	rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
+	rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
+
+	rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
+
+	/*
+	 * Wait until the BBP becomes ready.
+	 */
+	reg = rt2400pci_bbp_check(rt2x00dev);
+	if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
+		ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
+		*value = 0xff;
+		return;
+	}
+
+	*value = rt2x00_get_field32(reg, BBPCSR_VALUE);
+}
+
+static void rt2400pci_rf_write(const struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u32 value)
+{
+	u32 reg;
+	unsigned int i;
+
+	if (!word)
+		return;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
+		if (!rt2x00_get_field32(reg, RFCSR_BUSY))
+			goto rf_write;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
+	return;
+
+rf_write:
+	reg = 0;
+	rt2x00_set_field32(&reg, RFCSR_VALUE, value);
+	rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
+	rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
+	rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
+
+	rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
+	rt2x00_rf_write(rt2x00dev, word, value);
+}
+
+static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
+
+	eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
+	eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
+	eeprom->reg_data_clock =
+	    !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
+	eeprom->reg_chip_select =
+	    !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
+}
+
+static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg = 0;
+
+	rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
+	rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
+	rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
+			   !!eeprom->reg_data_clock);
+	rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
+			   !!eeprom->reg_chip_select);
+
+	rt2x00pci_register_write(rt2x00dev, CSR21, reg);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+#define CSR_OFFSET(__word)	( CSR_REG_BASE + ((__word) * sizeof(u32)) )
+
+static void rt2400pci_read_csr(const struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, u32 *data)
+{
+	rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
+}
+
+static void rt2400pci_write_csr(const struct rt2x00_dev *rt2x00dev,
+				const unsigned int word, u32 data)
+{
+	rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
+}
+
+static const struct rt2x00debug rt2400pci_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2400pci_read_csr,
+		.write		= rt2400pci_write_csr,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2400pci_bbp_read,
+		.write		= rt2400pci_bbp_write,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2400pci_rf_write,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+#ifdef CONFIG_RT2400PCI_RFKILL
+static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	return rt2x00_get_field32(reg, GPIOCSR_BIT0);
+}
+#endif /* CONFIG_RT2400PCI_RFKILL */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
+{
+	__le32 reg[2];
+
+	memset(&reg, 0, sizeof(reg));
+	memcpy(&reg, addr, ETH_ALEN);
+
+	/*
+	 * The MAC address is passed to us as an array of bytes,
+	 * that array is little endian, so no need for byte ordering.
+	 */
+	rt2x00pci_register_multiwrite(rt2x00dev, CSR3, &reg, sizeof(reg));
+}
+
+static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
+{
+	__le32 reg[2];
+
+	memset(&reg, 0, sizeof(reg));
+	memcpy(&reg, bssid, ETH_ALEN);
+
+	/*
+	 * The BSSID is passed to us as an array of bytes,
+	 * that array is little endian, so no need for byte ordering.
+	 */
+	rt2x00pci_register_multiwrite(rt2x00dev, CSR5, &reg, sizeof(reg));
+}
+
+static void rt2400pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
+					   const unsigned int filter)
+{
+	int promisc = !!(filter & IFF_PROMISC);
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+	rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, !promisc);
+	rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+}
+
+static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, int type)
+{
+	u32 reg;
+
+	rt2x00pci_register_write(rt2x00dev, CSR14, 0);
+
+	/*
+	 * Apply hardware packet filter.
+	 */
+	rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+
+	if (!is_monitor_present(&rt2x00dev->interface) &&
+	    (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
+		rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 1);
+	else
+		rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 0);
+
+	/*
+	 * If there is a non-monitor interface present
+	 * the packet should be strict (even if a monitor interface is present!).
+	 * When there is only 1 interface present which is in monitor mode
+	 * we should start accepting _all_ frames.
+	 */
+	if (is_interface_present(&rt2x00dev->interface)) {
+		rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 1);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 1);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 1);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
+	} else if (is_monitor_present(&rt2x00dev->interface)) {
+		rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 0);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 0);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 0);
+		rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 0);
+	}
+
+	rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+
+	/*
+	 * Enable beacon config
+	 */
+	rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
+	rt2x00_set_field32(&reg, BCNCSR1_PRELOAD,
+			   PREAMBLE + get_duration(IEEE80211_HEADER, 2));
+	rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
+
+	/*
+	 * Enable synchronisation.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+	if (is_interface_present(&rt2x00dev->interface)) {
+		rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
+		rt2x00_set_field32(&reg, CSR14_TBCN, 1);
+	}
+
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+	if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+		rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 2);
+	else if (type == IEEE80211_IF_TYPE_STA)
+		rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 1);
+	else if (is_monitor_present(&rt2x00dev->interface) &&
+		 !is_interface_present(&rt2x00dev->interface))
+		rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
+
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+}
+
+static void rt2400pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
+{
+	struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
+	u32 reg;
+	u32 preamble;
+	u16 value;
+
+	if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
+		preamble = SHORT_PREAMBLE;
+	else
+		preamble = PREAMBLE;
+
+	reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
+	rt2x00pci_register_write(rt2x00dev, ARCSR1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
+	value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
+		 SHORT_DIFS : DIFS) +
+	    PLCP + preamble + get_duration(ACK_SIZE, 10);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, value);
+	value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, value);
+	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
+
+	preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00;
+
+	rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
+	rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble);
+	rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
+	rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
+	rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
+
+	rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
+	rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble);
+	rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
+	rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
+	rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
+
+	rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
+	rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble);
+	rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
+	rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
+	rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
+
+	rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
+	rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble);
+	rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
+	rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
+	rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
+}
+
+static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev,
+				     const int phymode)
+{
+	struct ieee80211_hw_mode *mode;
+	struct ieee80211_rate *rate;
+
+	rt2x00dev->curr_hwmode = HWMODE_B;
+
+	mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
+	rate = &mode->rates[mode->num_rates - 1];
+
+	rt2400pci_config_rate(rt2x00dev, rate->val2);
+}
+
+static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
+				     const int index, const int channel)
+{
+	struct rf_channel reg;
+
+	/*
+	 * Fill rf_reg structure.
+	 */
+	memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
+
+	/*
+	 * Switch on tuning bits.
+	 */
+	rt2x00_set_field32(&reg.rf1, RF1_TUNER, 1);
+	rt2x00_set_field32(&reg.rf3, RF3_TUNER, 1);
+
+	rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
+	rt2400pci_rf_write(rt2x00dev, 2, reg.rf2);
+	rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
+
+	/*
+	 * RF2420 chipset don't need any additional actions.
+	 */
+	if (rt2x00_rf(&rt2x00dev->chip, RF2420))
+		return;
+
+	/*
+	 * For the RT2421 chipsets we need to write an invalid
+	 * reference clock rate to activate auto_tune.
+	 * After that we set the value back to the correct channel.
+	 */
+	rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
+	rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32);
+	rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
+
+	msleep(1);
+
+	rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
+	rt2400pci_rf_write(rt2x00dev, 2, reg.rf2);
+	rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
+
+	msleep(1);
+
+	/*
+	 * Switch off tuning bits.
+	 */
+	rt2x00_set_field32(&reg.rf1, RF1_TUNER, 0);
+	rt2x00_set_field32(&reg.rf3, RF3_TUNER, 0);
+
+	rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
+	rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
+
+	/*
+	 * Clear false CRC during channel switch.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CNT0, &reg.rf1);
+}
+
+static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
+{
+	rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower));
+}
+
+static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
+				     int antenna_tx, int antenna_rx)
+{
+	u8 r1;
+	u8 r4;
+
+	rt2400pci_bbp_read(rt2x00dev, 4, &r4);
+	rt2400pci_bbp_read(rt2x00dev, 1, &r1);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch (antenna_tx) {
+	case ANTENNA_SW_DIVERSITY:
+	case ANTENNA_HW_DIVERSITY:
+		rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1);
+		break;
+	case ANTENNA_A:
+		rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0);
+		break;
+	case ANTENNA_B:
+		rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2);
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch (antenna_rx) {
+	case ANTENNA_SW_DIVERSITY:
+	case ANTENNA_HW_DIVERSITY:
+		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
+		break;
+	case ANTENNA_A:
+		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0);
+		break;
+	case ANTENNA_B:
+		rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2400pci_bbp_write(rt2x00dev, 4, r4);
+	rt2400pci_bbp_write(rt2x00dev, 1, r1);
+}
+
+static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
+				      int short_slot_time, int beacon_int)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
+	rt2x00_set_field32(&reg, CSR11_SLOT_TIME,
+			   short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
+	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
+	rt2x00_set_field32(&reg, CSR18_SIFS, SIFS);
+	rt2x00_set_field32(&reg, CSR18_PIFS,
+			   short_slot_time ? SHORT_PIFS : PIFS);
+	rt2x00pci_register_write(rt2x00dev, CSR18, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
+	rt2x00_set_field32(&reg, CSR19_DIFS,
+			   short_slot_time ? SHORT_DIFS : DIFS);
+	rt2x00_set_field32(&reg, CSR19_EIFS, EIFS);
+	rt2x00pci_register_write(rt2x00dev, CSR19, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
+	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
+	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
+	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, beacon_int * 16);
+	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
+}
+
+static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
+			     const unsigned int flags,
+			     struct ieee80211_conf *conf)
+{
+	int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
+
+	if (flags & CONFIG_UPDATE_PHYMODE)
+		rt2400pci_config_phymode(rt2x00dev, conf->phymode);
+	if (flags & CONFIG_UPDATE_CHANNEL)
+		rt2400pci_config_channel(rt2x00dev, conf->channel_val,
+					 conf->channel);
+	if (flags & CONFIG_UPDATE_TXPOWER)
+		rt2400pci_config_txpower(rt2x00dev, conf->power_level);
+	if (flags & CONFIG_UPDATE_ANTENNA)
+		rt2400pci_config_antenna(rt2x00dev, conf->antenna_sel_tx,
+					 conf->antenna_sel_rx);
+	if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
+		rt2400pci_config_duration(rt2x00dev, short_slot_time,
+					  conf->beacon_int);
+}
+
+static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
+				struct ieee80211_tx_queue_params *params)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
+	rt2x00_set_field32(&reg, CSR11_CWMIN, params->cw_min);
+	rt2x00_set_field32(&reg, CSR11_CWMAX, params->cw_max);
+	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
+}
+
+/*
+ * LED functions.
+ */
+static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
+
+	rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
+	rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
+
+	if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
+		rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
+		rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
+	} else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
+		rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
+		rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
+	} else {
+		rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
+		rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
+	}
+
+	rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
+}
+
+static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
+	rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
+	rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
+	rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u8 bbp;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
+	rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
+
+	/*
+	 * Update False CCA count from register.
+	 */
+	rt2400pci_bbp_read(rt2x00dev, 39, &bbp);
+	rt2x00dev->link.false_cca = bbp;
+}
+
+static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
+{
+	rt2400pci_bbp_write(rt2x00dev, 13, 0x08);
+	rt2x00dev->link.vgc_level = 0x08;
+}
+
+static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+	u8 reg;
+
+	/*
+	 * The link tuner should not run longer then 60 seconds,
+	 * and should run once every 2 seconds.
+	 */
+	if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1))
+		return;
+
+	/*
+	 * Base r13 link tuning on the false cca count.
+	 */
+	rt2400pci_bbp_read(rt2x00dev, 13, &reg);
+
+	if (rt2x00dev->link.false_cca > 512 && reg < 0x20) {
+		rt2400pci_bbp_write(rt2x00dev, 13, ++reg);
+		rt2x00dev->link.vgc_level = reg;
+	} else if (rt2x00dev->link.false_cca < 100 && reg > 0x08) {
+		rt2400pci_bbp_write(rt2x00dev, 13, --reg);
+		rt2x00dev->link.vgc_level = reg;
+	}
+}
+
+/*
+ * Initialization functions.
+ */
+static void rt2400pci_init_rxring(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_ring *ring = rt2x00dev->rx;
+	struct data_desc *rxd;
+	unsigned int i;
+	u32 word;
+
+	memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
+
+	for (i = 0; i < ring->stats.limit; i++) {
+		rxd = ring->entry[i].priv;
+
+		rt2x00_desc_read(rxd, 2, &word);
+		rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
+				   ring->data_size);
+		rt2x00_desc_write(rxd, 2, word);
+
+		rt2x00_desc_read(rxd, 1, &word);
+		rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS,
+				   ring->entry[i].data_dma);
+		rt2x00_desc_write(rxd, 1, word);
+
+		rt2x00_desc_read(rxd, 0, &word);
+		rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
+		rt2x00_desc_write(rxd, 0, word);
+	}
+
+	rt2x00_ring_index_clear(rt2x00dev->rx);
+}
+
+static void rt2400pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
+{
+	struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
+	struct data_desc *txd;
+	unsigned int i;
+	u32 word;
+
+	memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
+
+	for (i = 0; i < ring->stats.limit; i++) {
+		txd = ring->entry[i].priv;
+
+		rt2x00_desc_read(txd, 1, &word);
+		rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS,
+				   ring->entry[i].data_dma);
+		rt2x00_desc_write(txd, 1, word);
+
+		rt2x00_desc_read(txd, 2, &word);
+		rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH,
+				   ring->data_size);
+		rt2x00_desc_write(txd, 2, word);
+
+		rt2x00_desc_read(txd, 0, &word);
+		rt2x00_set_field32(&word, TXD_W0_VALID, 0);
+		rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
+		rt2x00_desc_write(txd, 0, word);
+	}
+
+	rt2x00_ring_index_clear(ring);
+}
+
+static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	/*
+	 * Initialize rings.
+	 */
+	rt2400pci_init_rxring(rt2x00dev);
+	rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
+	rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
+	rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
+	rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+
+	/*
+	 * Initialize registers.
+	 */
+	rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
+	rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE,
+			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size);
+	rt2x00_set_field32(&reg, TXCSR2_NUM_TXD,
+			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
+	rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM,
+			   rt2x00dev->bcn[1].stats.limit);
+	rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO,
+			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
+	rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
+	rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
+			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
+	rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
+	rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
+			   rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
+	rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
+	rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
+			   rt2x00dev->bcn[1].data_dma);
+	rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
+	rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
+			   rt2x00dev->bcn[0].data_dma);
+	rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
+
+	rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
+	rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
+	rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit);
+	rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
+	rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
+			   rt2x00dev->rx->data_dma);
+	rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
+
+	return 0;
+}
+
+static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
+	rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
+	rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20);
+	rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
+
+	rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
+	rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
+	rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
+	rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
+	rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
+	rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
+			   (rt2x00dev->rx->data_size / 128));
+	rt2x00pci_register_write(rt2x00dev, CSR9, reg);
+
+	rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
+
+	rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);
+	rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA0, 133);
+	rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID0, 134);
+	rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA1, 136);
+	rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID1, 135);
+	rt2x00pci_register_write(rt2x00dev, ARCSR0, reg);
+
+	rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 3); /* Tx power.*/
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 32); /* Signal */
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 36); /* Rssi */
+	rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
+	rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
+
+	rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
+
+	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+		return -EBUSY;
+
+	rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223);
+	rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
+
+	rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
+	rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
+	rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
+
+	rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
+	rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
+	rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 154);
+	rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
+	rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 154);
+	rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
+	rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
+	rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
+	rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
+	rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
+	rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
+	rt2x00pci_register_write(rt2x00dev, CSR1, reg);
+
+	/*
+	 * We must clear the FCS and FIFO error count.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
+	rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
+
+	return 0;
+}
+
+static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2400pci_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			goto continue_csr_init;
+		NOTICE(rt2x00dev, "Waiting for BBP register.\n");
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+
+continue_csr_init:
+	rt2400pci_bbp_write(rt2x00dev, 1, 0x00);
+	rt2400pci_bbp_write(rt2x00dev, 3, 0x27);
+	rt2400pci_bbp_write(rt2x00dev, 4, 0x08);
+	rt2400pci_bbp_write(rt2x00dev, 10, 0x0f);
+	rt2400pci_bbp_write(rt2x00dev, 15, 0x72);
+	rt2400pci_bbp_write(rt2x00dev, 16, 0x74);
+	rt2400pci_bbp_write(rt2x00dev, 17, 0x20);
+	rt2400pci_bbp_write(rt2x00dev, 18, 0x72);
+	rt2400pci_bbp_write(rt2x00dev, 19, 0x0b);
+	rt2400pci_bbp_write(rt2x00dev, 20, 0x00);
+	rt2400pci_bbp_write(rt2x00dev, 28, 0x11);
+	rt2400pci_bbp_write(rt2x00dev, 29, 0x04);
+	rt2400pci_bbp_write(rt2x00dev, 30, 0x21);
+	rt2400pci_bbp_write(rt2x00dev, 31, 0x00);
+
+	DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
+			      reg_id, value);
+			rt2400pci_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+	DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
+
+	return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
+				enum dev_state state)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+	rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
+			   state == STATE_RADIO_RX_OFF);
+	rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+}
+
+static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
+				 enum dev_state state)
+{
+	int mask = (state == STATE_RADIO_IRQ_OFF);
+	u32 reg;
+
+	/*
+	 * When interrupts are being enabled, the interrupt registers
+	 * should clear the register to assure a clean state.
+	 */
+	if (state == STATE_RADIO_IRQ_ON) {
+		rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+		rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+	}
+
+	/*
+	 * Only toggle the interrupts bits we are going to use.
+	 * Non-checked interrupt bits are disabled by default.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
+	rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
+	rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
+	rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
+	rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
+	rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
+	rt2x00pci_register_write(rt2x00dev, CSR8, reg);
+}
+
+static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	/*
+	 * Initialize all registers.
+	 */
+	if (rt2400pci_init_rings(rt2x00dev) ||
+	    rt2400pci_init_registers(rt2x00dev) ||
+	    rt2400pci_init_bbp(rt2x00dev)) {
+		ERROR(rt2x00dev, "Register initialization failed.\n");
+		return -EIO;
+	}
+
+	/*
+	 * Enable interrupts.
+	 */
+	rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
+
+	/*
+	 * Enable LED
+	 */
+	rt2400pci_enable_led(rt2x00dev);
+
+	return 0;
+}
+
+static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	/*
+	 * Disable LED
+	 */
+	rt2400pci_disable_led(rt2x00dev);
+
+	rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
+
+	/*
+	 * Disable synchronisation.
+	 */
+	rt2x00pci_register_write(rt2x00dev, CSR14, 0);
+
+	/*
+	 * Cancel RX and TX.
+	 */
+	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+	rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
+	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+
+	/*
+	 * Disable interrupts.
+	 */
+	rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
+}
+
+static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
+			       enum dev_state state)
+{
+	u32 reg;
+	unsigned int i;
+	char put_to_sleep;
+	char bbp_state;
+	char rf_state;
+
+	put_to_sleep = (state != STATE_AWAKE);
+
+	rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
+	rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
+	rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
+	rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
+	rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
+	rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
+
+	/*
+	 * Device is not guaranteed to be in the requested state yet.
+	 * We must wait until the register indicates that the
+	 * device has entered the correct state.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
+		bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
+		rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
+		if (bbp_state == state && rf_state == state)
+			return 0;
+		msleep(10);
+	}
+
+	NOTICE(rt2x00dev, "Device failed to enter state %d, "
+	       "current device state: bbp %d and rf %d.\n",
+	       state, bbp_state, rf_state);
+
+	return -EBUSY;
+}
+
+static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
+				      enum dev_state state)
+{
+	int retval = 0;
+
+	switch (state) {
+	case STATE_RADIO_ON:
+		retval = rt2400pci_enable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_OFF:
+		rt2400pci_disable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_OFF:
+		rt2400pci_toggle_rx(rt2x00dev, state);
+		break;
+	case STATE_DEEP_SLEEP:
+	case STATE_SLEEP:
+	case STATE_STANDBY:
+	case STATE_AWAKE:
+		retval = rt2400pci_set_state(rt2x00dev, state);
+		break;
+	default:
+		retval = -ENOTSUPP;
+		break;
+	}
+
+	return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+				    struct data_desc *txd,
+				    struct data_entry_desc *desc,
+				    struct ieee80211_hdr *ieee80211hdr,
+				    unsigned int length,
+				    struct ieee80211_tx_control *control)
+{
+	u32 word;
+	u32 signal = 0;
+	u32 service = 0;
+	u32 length_high = 0;
+	u32 length_low = 0;
+
+	/*
+	 * The PLCP values should be treated as if they
+	 * were BBP values.
+	 */
+	rt2x00_set_field32(&signal, BBPCSR_VALUE, desc->signal);
+	rt2x00_set_field32(&signal, BBPCSR_REGNUM, 5);
+	rt2x00_set_field32(&signal, BBPCSR_BUSY, 1);
+
+	rt2x00_set_field32(&service, BBPCSR_VALUE, desc->service);
+	rt2x00_set_field32(&service, BBPCSR_REGNUM, 6);
+	rt2x00_set_field32(&service, BBPCSR_BUSY, 1);
+
+	rt2x00_set_field32(&length_high, BBPCSR_VALUE, desc->length_high);
+	rt2x00_set_field32(&length_high, BBPCSR_REGNUM, 7);
+	rt2x00_set_field32(&length_high, BBPCSR_BUSY, 1);
+
+	rt2x00_set_field32(&length_low, BBPCSR_VALUE, desc->length_low);
+	rt2x00_set_field32(&length_low, BBPCSR_REGNUM, 8);
+	rt2x00_set_field32(&length_low, BBPCSR_BUSY, 1);
+
+	/*
+	 * Start writing the descriptor words.
+	 */
+	rt2x00_desc_read(txd, 2, &word);
+	rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, length);
+	rt2x00_desc_write(txd, 2, word);
+
+	rt2x00_desc_read(txd, 3, &word);
+	rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, signal);
+	rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, service);
+	rt2x00_desc_write(txd, 3, word);
+
+	rt2x00_desc_read(txd, 4, &word);
+	rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, length_low);
+	rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, length_high);
+	rt2x00_desc_write(txd, 4, word);
+
+	rt2x00_desc_read(txd, 0, &word);
+	rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
+	rt2x00_set_field32(&word, TXD_W0_VALID, 1);
+	rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
+	rt2x00_set_field32(&word, TXD_W0_ACK,
+			   !(control->flags & IEEE80211_TXCTL_NO_ACK));
+	rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
+	rt2x00_set_field32(&word, TXD_W0_RTS,
+			   test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags));
+	rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
+	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
+			   !!(control->flags &
+			      IEEE80211_TXCTL_LONG_RETRY_LIMIT));
+	rt2x00_desc_write(txd, 0, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    unsigned int queue)
+{
+	u32 reg;
+
+	if (queue == IEEE80211_TX_QUEUE_BEACON) {
+		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+		if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
+			rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
+			rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+		}
+		return;
+	}
+
+	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+	if (queue == IEEE80211_TX_QUEUE_DATA0)
+		rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
+	else if (queue == IEEE80211_TX_QUEUE_DATA1)
+		rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
+	else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
+		rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
+	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+}
+
+/*
+ * RX control handlers
+ */
+static int rt2400pci_fill_rxdone(struct data_entry *entry,
+				 int *signal, int *rssi, int *ofdm, int *size)
+{
+	struct data_desc *rxd = entry->priv;
+	u32 word0;
+	u32 word2;
+
+	rt2x00_desc_read(rxd, 0, &word0);
+	rt2x00_desc_read(rxd, 2, &word2);
+
+	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
+	    rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+		return -EINVAL;
+
+	/*
+	 * Obtain the status about this packet.
+	 */
+	*signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
+	*rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
+	    entry->ring->rt2x00dev->rssi_offset;
+	*ofdm = 0;
+	*size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+	return 0;
+}
+
+/*
+ * Interrupt functions.
+ */
+static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue)
+{
+	struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
+	struct data_entry *entry;
+	struct data_desc *txd;
+	u32 word;
+	int tx_status;
+	int retry;
+
+	while (!rt2x00_ring_empty(ring)) {
+		entry = rt2x00_get_data_entry_done(ring);
+		txd = entry->priv;
+		rt2x00_desc_read(txd, 0, &word);
+
+		if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
+		    !rt2x00_get_field32(word, TXD_W0_VALID))
+			break;
+
+		/*
+		 * Obtain the status about this packet.
+		 */
+		tx_status = rt2x00_get_field32(word, TXD_W0_RESULT);
+		retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
+
+		rt2x00lib_txdone(entry, tx_status, retry);
+
+		/*
+		 * Make this entry available for reuse.
+		 */
+		entry->flags = 0;
+		rt2x00_set_field32(&word, TXD_W0_VALID, 0);
+		rt2x00_desc_write(txd, 0, word);
+		rt2x00_ring_index_done_inc(ring);
+	}
+
+	/*
+	 * If the data ring was full before the txdone handler
+	 * we must make sure the packet queue in the mac80211 stack
+	 * is reenabled when the txdone handler has finished.
+	 */
+	entry = ring->entry;
+	if (!rt2x00_ring_full(ring))
+		ieee80211_wake_queue(rt2x00dev->hw,
+				     entry->tx_status.control.queue);
+}
+
+static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg;
+
+	/*
+	 * Get the interrupt sources & saved to local variable.
+	 * Write register value back to clear pending interrupts.
+	 */
+	rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
+	rt2x00pci_register_write(rt2x00dev, CSR7, reg);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/*
+	 * Handle interrupts, walk through all bits
+	 * and run the tasks, the bits are checked in order of
+	 * priority.
+	 */
+
+	/*
+	 * 1 - Beacon timer expired interrupt.
+	 */
+	if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
+		rt2x00lib_beacondone(rt2x00dev);
+
+	/*
+	 * 2 - Rx ring done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, CSR7_RXDONE))
+		rt2x00pci_rxdone(rt2x00dev);
+
+	/*
+	 * 3 - Atim ring transmit done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
+		rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
+
+	/*
+	 * 4 - Priority ring transmit done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
+		rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
+
+	/*
+	 * 5 - Tx ring transmit done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
+		rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	struct eeprom_93cx6 eeprom;
+	u32 reg;
+	u16 word;
+	u8 *mac;
+
+	rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
+
+	eeprom.data = rt2x00dev;
+	eeprom.register_read = rt2400pci_eepromregister_read;
+	eeprom.register_write = rt2400pci_eepromregister_write;
+	eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
+	    PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
+	eeprom.reg_data_in = 0;
+	eeprom.reg_data_out = 0;
+	eeprom.reg_data_clock = 0;
+	eeprom.reg_chip_select = 0;
+
+	eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
+			       EEPROM_SIZE / sizeof(u16));
+
+	/*
+	 * Start validation of the data that has been read.
+	 */
+	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+	if (!is_valid_ether_addr(mac)) {
+		random_ether_addr(mac);
+		EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	if (word == 0xffff) {
+		ERROR(rt2x00dev, "Invalid EEPROM data detected.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 value;
+	u16 eeprom;
+
+	/*
+	 * Read EEPROM word for configuration.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Identify RF chipset.
+	 */
+	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
+	rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
+		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Identify default antenna configuration.
+	 */
+	rt2x00dev->hw->conf.antenna_sel_tx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
+	rt2x00dev->hw->conf.antenna_sel_rx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
+
+	/*
+	 * Store led mode, for correct led behaviour.
+	 */
+	rt2x00dev->led_mode =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+	/*
+	 * Detect if this device has an hardware controlled radio.
+	 */
+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+		__set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+
+	/*
+	 * Check if the BBP tuning should be enabled.
+	 */
+	if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
+		__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+
+	return 0;
+}
+
+/*
+ * RF value list for RF2420 & RF2421
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg[] = {
+	{ 1,  0x00022058, 0x000c1fda, 0x00000101, 0 },
+	{ 2,  0x00022058, 0x000c1fee, 0x00000101, 0 },
+	{ 3,  0x00022058, 0x000c2002, 0x00000101, 0 },
+	{ 4,  0x00022058, 0x000c2016, 0x00000101, 0 },
+	{ 5,  0x00022058, 0x000c202a, 0x00000101, 0 },
+	{ 6,  0x00022058, 0x000c203e, 0x00000101, 0 },
+	{ 7,  0x00022058, 0x000c2052, 0x00000101, 0 },
+	{ 8,  0x00022058, 0x000c2066, 0x00000101, 0 },
+	{ 9,  0x00022058, 0x000c207a, 0x00000101, 0 },
+	{ 10, 0x00022058, 0x000c208e, 0x00000101, 0 },
+	{ 11, 0x00022058, 0x000c20a2, 0x00000101, 0 },
+	{ 12, 0x00022058, 0x000c20b6, 0x00000101, 0 },
+	{ 13, 0x00022058, 0x000c20ca, 0x00000101, 0 },
+	{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
+};
+
+static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	u8 *txpower;
+	unsigned int i;
+
+	/*
+	 * Initialize all hw fields.
+	 */
+	rt2x00dev->hw->flags =
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_MONITOR_DURING_OPER |
+	    IEEE80211_HW_NO_PROBE_FILTERING;
+	rt2x00dev->hw->extra_tx_headroom = 0;
+	rt2x00dev->hw->max_signal = MAX_SIGNAL;
+	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
+	rt2x00dev->hw->queues = 2;
+
+	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
+	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+				rt2x00_eeprom_addr(rt2x00dev,
+						   EEPROM_MAC_ADDR_0));
+
+	/*
+	 * Convert tx_power array in eeprom.
+	 */
+	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+	for (i = 0; i < 14; i++)
+		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+
+	/*
+	 * Initialize hw_mode information.
+	 */
+	spec->num_modes = 1;
+	spec->num_rates = 4;
+	spec->tx_power_a = NULL;
+	spec->tx_power_bg = txpower;
+	spec->tx_power_default = DEFAULT_TXPOWER;
+
+	spec->num_channels = ARRAY_SIZE(rf_vals_bg);
+	spec->channels = rf_vals_bg;
+}
+
+static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2400pci_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2400pci_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	rt2400pci_probe_hw_mode(rt2x00dev);
+
+	/*
+	 * This device requires the beacon ring
+	 */
+	__set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw,
+				     u32 short_retry, u32 long_retry)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
+	rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
+	rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
+	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
+
+	return 0;
+}
+
+static int rt2400pci_conf_tx(struct ieee80211_hw *hw,
+			     int queue,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	/*
+	 * We don't support variating cw_min and cw_max variables
+	 * per queue. So by default we only configure the TX queue,
+	 * and ignore all other configurations.
+	 */
+	if (queue != IEEE80211_TX_QUEUE_DATA0)
+		return -EINVAL;
+
+	if (rt2x00mac_conf_tx(hw, queue, params))
+		return -EINVAL;
+
+	/*
+	 * Write configuration to register.
+	 */
+	rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params);
+
+	return 0;
+}
+
+static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
+	rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
+	tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
+
+	return tsf;
+}
+
+static void rt2400pci_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	rt2x00pci_register_write(rt2x00dev, CSR16, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR17, 0);
+}
+
+static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
+	return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
+}
+
+static const struct ieee80211_ops rt2400pci_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.config_interface	= rt2x00mac_config_interface,
+	.set_multicast_list	= rt2x00mac_set_multicast_list,
+	.get_stats		= rt2x00mac_get_stats,
+	.set_retry_limit	= rt2400pci_set_retry_limit,
+	.conf_tx		= rt2400pci_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2400pci_get_tsf,
+	.reset_tsf		= rt2400pci_reset_tsf,
+	.beacon_update		= rt2x00pci_beacon_update,
+	.tx_last_beacon		= rt2400pci_tx_last_beacon,
+};
+
+static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
+	.irq_handler		= rt2400pci_interrupt,
+	.probe_hw		= rt2400pci_probe_hw,
+	.initialize		= rt2x00pci_initialize,
+	.uninitialize		= rt2x00pci_uninitialize,
+	.set_device_state	= rt2400pci_set_device_state,
+#ifdef CONFIG_RT2400PCI_RFKILL
+	.rfkill_poll		= rt2400pci_rfkill_poll,
+#endif /* CONFIG_RT2400PCI_RFKILL */
+	.link_stats		= rt2400pci_link_stats,
+	.reset_tuner		= rt2400pci_reset_tuner,
+	.link_tuner		= rt2400pci_link_tuner,
+	.write_tx_desc		= rt2400pci_write_tx_desc,
+	.write_tx_data		= rt2x00pci_write_tx_data,
+	.kick_tx_queue		= rt2400pci_kick_tx_queue,
+	.fill_rxdone		= rt2400pci_fill_rxdone,
+	.config_mac_addr	= rt2400pci_config_mac_addr,
+	.config_bssid		= rt2400pci_config_bssid,
+	.config_packet_filter	= rt2400pci_config_packet_filter,
+	.config_type		= rt2400pci_config_type,
+	.config			= rt2400pci_config,
+};
+
+static const struct rt2x00_ops rt2400pci_ops = {
+	.name		= DRV_NAME,
+	.rxd_size	= RXD_DESC_SIZE,
+	.txd_size	= TXD_DESC_SIZE,
+	.eeprom_size	= EEPROM_SIZE,
+	.rf_size	= RF_SIZE,
+	.lib		= &rt2400pci_rt2x00_ops,
+	.hw		= &rt2400pci_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+	.debugfs	= &rt2400pci_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * RT2400pci module information.
+ */
+static struct pci_device_id rt2400pci_device_table[] = {
+	{ PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
+	{ 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
+MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
+MODULE_LICENSE("GPL");
+
+static struct pci_driver rt2400pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= rt2400pci_device_table,
+	.probe		= rt2x00pci_probe,
+	.remove		= __devexit_p(rt2x00pci_remove),
+	.suspend	= rt2x00pci_suspend,
+	.resume		= rt2x00pci_resume,
+};
+
+static int __init rt2400pci_init(void)
+{
+	return pci_register_driver(&rt2400pci_driver);
+}
+
+static void __exit rt2400pci_exit(void)
+{
+	pci_unregister_driver(&rt2400pci_driver);
+}
+
+module_init(rt2400pci_init);
+module_exit(rt2400pci_exit);