Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

1 files changed, 575 insertions, 0 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
new file mode 100644
index 000000000000..bb1bf96670eb
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -0,0 +1,575 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_usb_card_write() - This function writes to the USB Card.
+ * @adapter: Pointer to the adapter structure.
+ * @buf: Pointer to the buffer from where the data has to be taken.
+ * @len: Length to be written.
+ * @endpoint: Type of endpoint.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_card_write(struct rsi_hw *adapter,
+			      void *buf,
+			      u16 len,
+			      u8 endpoint)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	int status;
+	s32 transfer;
+
+	status = usb_bulk_msg(dev->usbdev,
+			      usb_sndbulkpipe(dev->usbdev,
+			      dev->bulkout_endpoint_addr[endpoint - 1]),
+			      buf,
+			      len,
+			      &transfer,
+			      HZ * 5);
+
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"Card write failed with error code :%10d\n", status);
+		dev->write_fail = 1;
+	}
+	return status;
+}
+
+/**
+ * rsi_write_multiple() - This function writes multiple bytes of information
+ *			  to the USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_write_multiple(struct rsi_hw *adapter,
+			      u8 endpoint,
+			      u8 *data,
+			      u32 count)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u8 *seg = dev->tx_buffer;
+
+	if (dev->write_fail)
+		return 0;
+
+	if (endpoint == MGMT_EP) {
+		memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
+		memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
+	} else {
+		seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
+	}
+
+	return rsi_usb_card_write(adapter,
+				  seg,
+				  count + RSI_USB_TX_HEAD_ROOM,
+				  endpoint);
+}
+
+/**
+ * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk
+ *					  endpoints to the device.
+ * @interface: Pointer to the USB interface structure.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: ret_val: 0 on success, -ENOMEM on failure.
+ */
+static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
+					      struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	__le16 buffer_size;
+	int ii, bep_found = 0;
+
+	iface_desc = &(interface->altsetting[0]);
+
+	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
+		endpoint = &(iface_desc->endpoint[ii].desc);
+
+		if ((!(dev->bulkin_endpoint_addr)) &&
+		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes &
+		    USB_ENDPOINT_XFERTYPE_MASK) ==
+		    USB_ENDPOINT_XFER_BULK)) {
+			buffer_size = endpoint->wMaxPacketSize;
+			dev->bulkin_size = buffer_size;
+			dev->bulkin_endpoint_addr =
+				endpoint->bEndpointAddress;
+		}
+
+		if (!dev->bulkout_endpoint_addr[bep_found] &&
+		    !(endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		      USB_ENDPOINT_XFER_BULK)) {
+			dev->bulkout_endpoint_addr[bep_found] =
+				endpoint->bEndpointAddress;
+			buffer_size = endpoint->wMaxPacketSize;
+			dev->bulkout_size[bep_found] = buffer_size;
+			bep_found++;
+		}
+
+		if (bep_found >= MAX_BULK_EP)
+			break;
+	}
+
+	if (!(dev->bulkin_endpoint_addr) &&
+	    (dev->bulkout_endpoint_addr[0]))
+		return -EINVAL;
+
+	return 0;
+}
+
+/* rsi_usb_reg_read() - This function reads data from given register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register to be read.
+ * @value: Value to be read.
+ * @len: length of data to be read.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_read(struct usb_device *usbdev,
+			    u32 reg,
+			    u16 *value,
+			    u16 len)
+{
+	u8 temp_buf[4];
+	int status = 0;
+
+	status = usb_control_msg(usbdev,
+				 usb_rcvctrlpipe(usbdev, 0),
+				 USB_VENDOR_REGISTER_READ,
+				 USB_TYPE_VENDOR,
+				 ((reg & 0xffff0000) >> 16), (reg & 0xffff),
+				 (void *)temp_buf,
+				 len,
+				 HZ * 5);
+
+	*value = (temp_buf[0] | (temp_buf[1] << 8));
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Reg read failed with error code :%d\n",
+			__func__, status);
+	}
+	return status;
+}
+
+/**
+ * rsi_usb_reg_write() - This function writes the given data into the given
+ *			 register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register.
+ * @value: Value to write.
+ * @len: Length of data to be written.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_write(struct usb_device *usbdev,
+			     u32 reg,
+			     u16 value,
+			     u16 len)
+{
+	u8 usb_reg_buf[4];
+	int status = 0;
+
+	usb_reg_buf[0] = (value & 0x00ff);
+	usb_reg_buf[1] = (value & 0xff00) >> 8;
+	usb_reg_buf[2] = 0x0;
+	usb_reg_buf[3] = 0x0;
+
+	status = usb_control_msg(usbdev,
+				 usb_sndctrlpipe(usbdev, 0),
+				 USB_VENDOR_REGISTER_WRITE,
+				 USB_TYPE_VENDOR,
+				 ((reg & 0xffff0000) >> 16),
+				 (reg & 0xffff),
+				 (void *)usb_reg_buf,
+				 len,
+				 HZ * 5);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Reg write failed with error code :%d\n",
+			__func__, status);
+	}
+	return status;
+}
+
+/**
+ * rsi_rx_done_handler() - This function is called when a packet is received
+ *			   from USB stack. This is callback to recieve done.
+ * @urb: Received URB.
+ *
+ * Return: None.
+ */
+static void rsi_rx_done_handler(struct urb *urb)
+{
+	struct rsi_hw *adapter = urb->context;
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	if (urb->status)
+		return;
+
+	rsi_set_event(&dev->rx_thread.event);
+}
+
+/**
+ * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_rx_urb_submit(struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct urb *urb = dev->rx_usb_urb[0];
+	int status;
+
+	usb_fill_bulk_urb(urb,
+			  dev->usbdev,
+			  usb_rcvbulkpipe(dev->usbdev,
+				dev->bulkin_endpoint_addr),
+			  urb->transfer_buffer,
+			  3000,
+			  rsi_rx_done_handler,
+			  adapter);
+
+	status = usb_submit_urb(urb, GFP_KERNEL);
+	if (status)
+		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
+
+	return status;
+}
+
+/**
+ * rsi_usb_write_register_multiple() - This function writes multiple bytes of
+ *				       information to multiple registers.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written on to the registers.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
+				    u32 addr,
+				    u8 *data,
+				    u32 count)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	u8 *buf;
+	u8 transfer;
+	int status = 0;
+
+	buf = kzalloc(4096, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	while (count) {
+		transfer = min_t(int, count, 4096);
+		memcpy(buf, data, transfer);
+		status = usb_control_msg(dev->usbdev,
+					 usb_sndctrlpipe(dev->usbdev, 0),
+					 USB_VENDOR_REGISTER_WRITE,
+					 USB_TYPE_VENDOR,
+					 ((addr & 0xffff0000) >> 16),
+					 (addr & 0xffff),
+					 (void *)buf,
+					 transfer,
+					 HZ * 5);
+		if (status < 0) {
+			rsi_dbg(ERR_ZONE,
+				"Reg write failed with error code :%d\n",
+				status);
+		} else {
+			count -= transfer;
+			data += transfer;
+			addr += transfer;
+		}
+	}
+
+	kfree(buf);
+	return 0;
+}
+
+/**
+ *rsi_usb_host_intf_write_pkt() - This function writes the packet to the
+ *				   USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @pkt: Pointer to the data to be written on to the card.
+ * @len: Length of the data to be written on to the card.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
+				       u8 *pkt,
+				       u32 len)
+{
+	u32 queueno = ((pkt[1] >> 4) & 0xf);
+	u8 endpoint;
+
+	endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);
+
+	return rsi_write_multiple(adapter,
+				  endpoint,
+				  (u8 *)pkt,
+				  len);
+}
+
+/**
+ * rsi_deinit_usb_interface() - This function deinitializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	rsi_kill_thread(&dev->rx_thread);
+	kfree(adapter->priv->rx_data_pkt);
+	kfree(dev->tx_buffer);
+}
+
+/**
+ * rsi_init_usb_interface() - This function initializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ * @pfunction: Pointer to USB interface structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_init_usb_interface(struct rsi_hw *adapter,
+				  struct usb_interface *pfunction)
+{
+	struct rsi_91x_usbdev *rsi_dev;
+	struct rsi_common *common = adapter->priv;
+	int status;
+
+	rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
+	if (!rsi_dev)
+		return -ENOMEM;
+
+	adapter->rsi_dev = rsi_dev;
+	rsi_dev->usbdev = interface_to_usbdev(pfunction);
+
+	if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
+		return -EINVAL;
+
+	adapter->device = &pfunction->dev;
+	usb_set_intfdata(pfunction, adapter);
+
+	common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
+	if (!common->rx_data_pkt) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC);
+	rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
+	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
+	rsi_dev->tx_blk_size = 252;
+
+	/* Initializing function callbacks */
+	adapter->rx_urb_submit = rsi_rx_urb_submit;
+	adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
+	adapter->check_hw_queue_status = rsi_usb_check_queue_status;
+	adapter->determine_event_timeout = rsi_usb_event_timeout;
+
+	rsi_init_event(&rsi_dev->rx_thread.event);
+	status = rsi_create_kthread(common, &rsi_dev->rx_thread,
+				    rsi_usb_rx_thread, "RX-Thread");
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
+		goto fail;
+	}
+
+#ifdef CONFIG_RSI_DEBUGFS
+	/* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
+	adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
+#endif
+
+	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
+	return 0;
+
+fail:
+	kfree(rsi_dev->tx_buffer);
+	kfree(common->rx_data_pkt);
+	return status;
+}
+
+/**
+ * rsi_probe() - This function is called by kernel when the driver provided
+ *		 Vendor and device IDs are matched. All the initialization
+ *		 work is done here.
+ * @pfunction: Pointer to the USB interface structure.
+ * @id: Pointer to the usb_device_id structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_probe(struct usb_interface *pfunction,
+		     const struct usb_device_id *id)
+{
+	struct rsi_hw *adapter;
+	struct rsi_91x_usbdev *dev;
+	u16 fw_status;
+
+	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
+
+	adapter = rsi_91x_init();
+	if (!adapter) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
+			__func__);
+		return 1;
+	}
+
+	if (rsi_init_usb_interface(adapter, pfunction)) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
+			__func__);
+		goto err;
+	}
+
+	rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);
+
+	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+	if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0)
+		goto err1;
+	else
+		fw_status &= 1;
+
+	if (!fw_status) {
+		if (rsi_usb_device_init(adapter->priv)) {
+			rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
+				__func__);
+			goto err1;
+		}
+
+		if (rsi_usb_reg_write(dev->usbdev,
+				      USB_INTERNAL_REG_1,
+				      RSI_USB_READY_MAGIC_NUM, 1) < 0)
+			goto err1;
+		rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
+	}
+
+	if (rsi_rx_urb_submit(adapter))
+		goto err1;
+
+	return 0;
+err1:
+	rsi_deinit_usb_interface(adapter);
+err:
+	rsi_91x_deinit(adapter);
+	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
+	return 1;
+}
+
+/**
+ * rsi_disconnect() - This function performs the reverse of the probe function,
+ *		      it deintialize the driver structure.
+ * @pfunction: Pointer to the USB interface structure.
+ *
+ * Return: None.
+ */
+static void rsi_disconnect(struct usb_interface *pfunction)
+{
+	struct rsi_hw *adapter = usb_get_intfdata(pfunction);
+
+	if (!adapter)
+		return;
+
+	rsi_mac80211_detach(adapter);
+	rsi_deinit_usb_interface(adapter);
+	rsi_91x_deinit(adapter);
+
+	rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__);
+}
+
+#ifdef CONFIG_PM
+static int rsi_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+
+static int rsi_resume(struct usb_interface *intf)
+{
+	/* Not yet implemented */
+	return -ENOSYS;
+}
+#endif
+
+static const struct usb_device_id rsi_dev_table[] = {
+	{ USB_DEVICE(0x0303, 0x0100) },
+	{ USB_DEVICE(0x041B, 0x0301) },
+	{ USB_DEVICE(0x041B, 0x0201) },
+	{ USB_DEVICE(0x041B, 0x9330) },
+	{ /* Blank */},
+};
+
+static struct usb_driver rsi_driver = {
+	.name       = "RSI-USB WLAN",
+	.probe      = rsi_probe,
+	.disconnect = rsi_disconnect,
+	.id_table   = rsi_dev_table,
+#ifdef CONFIG_PM
+	.suspend    = rsi_suspend,
+	.resume     = rsi_resume,
+#endif
+};
+
+/**
+ * rsi_module_init() - This function registers the client driver.
+ * @void: Void.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_module_init(void)
+{
+	usb_register(&rsi_driver);
+	rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_module_exit() - This function unregisters the client driver.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_module_exit(void)
+{
+	usb_deregister(&rsi_driver);
+	rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
+}
+
+module_init(rsi_module_init);
+module_exit(rsi_module_exit);
+
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Common USB layer for RSI drivers");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_DEVICE_TABLE(usb, rsi_dev_table);
+MODULE_FIRMWARE(FIRMWARE_RSI9113);
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");