Add ath6kl cleaned up driver

Last May we started working on cleaning up ath6kl driver which is
currently in staging. The work has happened in a separate
ath6kl-cleanup tree:

http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary

After over 1100 (!) patches we have now reached a state where I would
like to start discussing about pushing the driver to the wireless
trees and replacing the staging driver.

The driver is now a lot smaller and looks like a proper Linux driver.
The size of the driver (measured with simple wc -l) dropped from 49
kLOC to 18 kLOC and the number of the .c and .h files dropped from 107
to 22. Most importantly the number of subdirectories reduced from 26
to zero :)

There are two remaining checkpatch warnings in the driver which we
decided to omit for now:

drivers/net/wireless/ath/ath6kl/debug.c:31:
  WARNING: printk() should include KERN_ facility level
drivers/net/wireless/ath/ath6kl/sdio.c:527:
  WARNING: msleep < 20ms can sleep for up to 20ms;
  see Documentation/timers/timers-howto.txt

The driver has endian annotations for all the hardware specific
structures and there are no sparse errors. Unfortunately I don't have
any big endian hardware to test that right now.

We have been testing the driver both on x86 and arm platforms. The
code is also compiled with sparc and parisc cross compilers.

Notable missing features compared to the current staging driver are:

o HCI over SDIO support
o nl80211 testmode
o firmware logging
o suspend support

Testmode, firmware logging and suspend support will be added soon. HCI
over SDIO support will be more difficult as the HCI driver needs to
share code with the wifi driver. This is something we need to research
more.

Also I want to point out the changes I did for signed endian support.
As I wasn't able to find any support for signed endian annotations I
decided to follow what NTFS has done and added my own. Grep for sle16
and sle32, especially from wmi.h.

Various people have been working on the cleanup, the hall of
fame based on number of patches is:

   543  Vasanthakumar Thiagarajan
   403  Raja Mani
   252  Kalle Valo
    16  Vivek Natarajan
    12  Suraj Sumangala
     3  Joe Perches
     2  Jouni Malinen

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com>
Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 216 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
new file mode 100644
index 000000000000..7d39c1769fe4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef HIF_H
+#define HIF_H
+
+#include "common.h"
+#include "core.h"
+
+#include <linux/scatterlist.h>
+
+#define BUS_REQUEST_MAX_NUM                64
+#define HIF_MBOX_BLOCK_SIZE                128
+#define HIF_MBOX0_BLOCK_SIZE               1
+
+#define HIF_DMA_BUFFER_SIZE (32 * 1024)
+#define CMD53_FIXED_ADDRESS 1
+#define CMD53_INCR_ADDRESS  2
+
+#define MAX_SCATTER_REQUESTS             4
+#define MAX_SCATTER_ENTRIES_PER_REQ      16
+#define MAX_SCATTER_REQ_TRANSFER_SIZE    (32 * 1024)
+
+#define MANUFACTURER_ID_AR6003_BASE        0x300
+    /* SDIO manufacturer ID and Codes */
+#define MANUFACTURER_ID_ATH6KL_BASE_MASK     0xFF00
+#define MANUFACTURER_CODE                  0x271	/* Atheros */
+
+/* Mailbox address in SDIO address space */
+#define HIF_MBOX_BASE_ADDR                 0x800
+#define HIF_MBOX_WIDTH                     0x800
+
+#define HIF_MBOX_END_ADDR  (HTC_MAILBOX_NUM_MAX * HIF_MBOX_WIDTH - 1)
+
+/* version 1 of the chip has only a 12K extended mbox range */
+#define HIF_MBOX0_EXT_BASE_ADDR  0x4000
+#define HIF_MBOX0_EXT_WIDTH      (12*1024)
+
+/* GMBOX addresses */
+#define HIF_GMBOX_BASE_ADDR                0x7000
+#define HIF_GMBOX_WIDTH                    0x4000
+
+/* interrupt mode register */
+#define CCCR_SDIO_IRQ_MODE_REG         0xF0
+
+/* mode to enable special 4-bit interrupt assertion without clock */
+#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ   (1 << 0)
+
+struct bus_request {
+	struct list_head list;
+
+	/* request data */
+	u32 address;
+
+	u8 *buffer;
+	u32 length;
+	u32 request;
+	struct htc_packet *packet;
+	int status;
+
+	/* this is a scatter request */
+	struct hif_scatter_req *scat_req;
+};
+
+/* direction of transfer (read/write) */
+#define HIF_READ                    0x00000001
+#define HIF_WRITE                   0x00000002
+#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
+
+/*
+ *     emode - This indicates the whether the command is to be executed in a
+ *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
+ *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
+ *             implemented using the asynchronous mode allowing the the bus
+ *             driver to indicate the completion of operation through the
+ *             registered callback routine. The requirement primarily comes
+ *             from the contexts these operations get called from (a driver's
+ *             transmit context or the ISR context in case of receive).
+ *             Support for both of these modes is essential.
+ */
+#define HIF_SYNCHRONOUS             0x00000010
+#define HIF_ASYNCHRONOUS            0x00000020
+#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
+
+/*
+ *     dmode - An interface may support different kinds of commands based on
+ *             the tradeoff between the amount of data it can carry and the
+ *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
+ *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
+ *             to the nearest block size by padding. The size of the block is
+ *             configurable at compile time using the HIF_BLOCK_SIZE and is
+ *             negotiated with the target during initialization after the
+ *             ATH6KL interrupts are enabled.
+ */
+#define HIF_BYTE_BASIS              0x00000040
+#define HIF_BLOCK_BASIS             0x00000080
+#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
+
+/*
+ *     amode - This indicates if the address has to be incremented on ATH6KL
+ *             after every read/write operation (HIF?FIXED_ADDRESS/
+ *             HIF_INCREMENTAL_ADDRESS).
+ */
+#define HIF_FIXED_ADDRESS           0x00000100
+#define HIF_INCREMENTAL_ADDRESS     0x00000200
+#define HIF_AMODE_MASK		  (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_ASYNC_BYTE_INC					\
+	(HIF_WRITE | HIF_ASYNCHRONOUS |				\
+	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_ASYNC_BLOCK_INC					\
+	(HIF_WRITE | HIF_ASYNCHRONOUS |				\
+	 HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_SYNC_BYTE_FIX					\
+	(HIF_WRITE | HIF_SYNCHRONOUS |				\
+	 HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+
+#define HIF_WR_SYNC_BYTE_INC					\
+	(HIF_WRITE | HIF_SYNCHRONOUS |				\
+	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_SYNC_BLOCK_INC					\
+	(HIF_WRITE | HIF_SYNCHRONOUS |				\
+	 HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_RD_SYNC_BYTE_INC						\
+	(HIF_READ | HIF_SYNCHRONOUS |					\
+	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_RD_SYNC_BYTE_FIX						\
+	(HIF_READ | HIF_SYNCHRONOUS |					\
+	 HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+
+#define HIF_RD_ASYNC_BLOCK_FIX						\
+	(HIF_READ | HIF_ASYNCHRONOUS |					\
+	 HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
+
+#define HIF_RD_SYNC_BLOCK_FIX						\
+	(HIF_READ | HIF_SYNCHRONOUS |					\
+	 HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
+
+struct hif_scatter_item {
+	u8 *buf;
+	int len;
+	struct htc_packet *packet;
+};
+
+struct hif_scatter_req {
+	struct list_head list;
+	/* address for the read/write operation */
+	u32 addr;
+
+	/* request flags */
+	u32 req;
+
+	/* total length of entire transfer */
+	u32 len;
+
+	u32 flags;
+	void (*complete) (struct hif_scatter_req *);
+	int status;
+	struct htc_endpoint *ep;
+	int scat_entries;
+
+	struct hif_scatter_req_priv *req_priv;
+
+	/* bounce buffer for upper layers to copy to/from */
+	u8 *virt_dma_buf;
+
+	struct hif_scatter_item scat_list[1];
+};
+
+struct hif_dev_scat_sup_info {
+	int (*rw_scat_func) (struct ath6kl *ar, struct hif_scatter_req *);
+	int max_scat_entries;
+	int max_xfer_szper_scatreq;
+};
+
+struct hif_scatter_req_priv {
+	struct bus_request *busrequest;
+	struct scatterlist sgentries[MAX_SCATTER_ENTRIES_PER_REQ];
+};
+
+struct ath6kl_hif_ops {
+	int (*read_write_sync)(struct ath6kl *ar, u32 addr, u8 *buf,
+			       u32 len, u32 request);
+	int (*write_async)(struct ath6kl *ar, u32 address, u8 *buffer,
+			   u32 length, u32 request, struct htc_packet *packet);
+
+	void (*irq_enable)(struct ath6kl *ar);
+	void (*irq_disable)(struct ath6kl *ar);
+
+	struct hif_scatter_req *(*scatter_req_get)(struct ath6kl *ar);
+	void (*scatter_req_add)(struct ath6kl *ar,
+				struct hif_scatter_req *s_req);
+	int (*enable_scatter)(struct ath6kl *ar,
+			      struct hif_dev_scat_sup_info *info);
+	void (*cleanup_scatter)(struct ath6kl *ar);
+};
+
+#endif