Merge branches 'clockevents/4.4-fixes' and 'clockevents/4.5-fixes' of http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent

Pull in fixes from Daniel Lezcano:

 - Fix the vt8500 timer leading to a system lock up when dealing with too
   small delta (Roman Volkov)

 - Select the CLKSRC_MMIO when the fsl_ftm_timer is enabled with COMPILE_TEST
   (Daniel Lezcano)

 - Prevent to compile timers using the 'iomem' API when the architecture has
   not HAS_IOMEM set (Richard Weinberger)

1 files changed, 43 insertions, 10 deletions

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 3fca200b986c..930785a724e1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -57,12 +57,6 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_TARGET_WAIT 3000
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
-#define QCA988X_2_0_DEVICE_ID	(0x003c)
-#define QCA6164_2_1_DEVICE_ID	(0x0041)
-#define QCA6174_2_1_DEVICE_ID	(0x003e)
-#define QCA99X0_2_0_DEVICE_ID	(0x0040)
-#define QCA9377_1_0_DEVICE_ID	(0x0042)
-
 static const struct pci_device_id ath10k_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
 	{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
@@ -92,7 +86,9 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
 
 	{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
+
 	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
+	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
 };
 
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
@@ -111,8 +107,9 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state);
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 
-static const struct ce_attr host_ce_config_wlan[] = {
+static struct ce_attr host_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
 	{
 		.flags = CE_ATTR_FLAGS,
@@ -128,7 +125,7 @@ static const struct ce_attr host_ce_config_wlan[] = {
 		.src_nentries = 0,
 		.src_sz_max = 2048,
 		.dest_nentries = 512,
-		.recv_cb = ath10k_pci_htc_rx_cb,
+		.recv_cb = ath10k_pci_htt_htc_rx_cb,
 	},
 
 	/* CE2: target->host WMI */
@@ -217,7 +214,7 @@ static const struct ce_attr host_ce_config_wlan[] = {
 };
 
 /* Target firmware's Copy Engine configuration. */
-static const struct ce_pipe_config target_ce_config_wlan[] = {
+static struct ce_pipe_config target_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
 	{
 		.pipenum = __cpu_to_le32(0),
@@ -330,7 +327,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = {
  * This table is derived from the CE_PCI TABLE, above.
  * It is passed to the Target at startup for use by firmware.
  */
-static const struct service_to_pipe target_service_to_ce_map_wlan[] = {
+static struct service_to_pipe target_service_to_ce_map_wlan[] = {
 	{
 		__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
 		__cpu_to_le32(PIPEDIR_OUT),	/* out = UL = host -> target */
@@ -1208,6 +1205,16 @@ static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
 }
 
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
+{
+	/* CE4 polling needs to be done whenever CE pipe which transports
+	 * HTT Rx (target->host) is processed.
+	 */
+	ath10k_ce_per_engine_service(ce_state->ar, 4);
+
+	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
+}
+
 /* Called by lower (CE) layer when a send to HTT Target completes. */
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {
@@ -2027,6 +2034,29 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	return 0;
 }
 
+static void ath10k_pci_override_ce_config(struct ath10k *ar)
+{
+	struct ce_attr *attr;
+	struct ce_pipe_config *config;
+
+	/* For QCA6174 we're overriding the Copy Engine 5 configuration,
+	 * since it is currently used for other feature.
+	 */
+
+	/* Override Host's Copy Engine 5 configuration */
+	attr = &host_ce_config_wlan[5];
+	attr->src_sz_max = 0;
+	attr->dest_nentries = 0;
+
+	/* Override Target firmware's Copy Engine configuration */
+	config = &target_ce_config_wlan[5];
+	config->pipedir = __cpu_to_le32(PIPEDIR_OUT);
+	config->nbytes_max = __cpu_to_le32(2048);
+
+	/* Map from service/endpoint to Copy Engine */
+	target_service_to_ce_map_wlan[15].pipenum = __cpu_to_le32(1);
+}
+
 static int ath10k_pci_alloc_pipes(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -3020,6 +3050,9 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_core_destroy;
 	}
 
+	if (QCA_REV_6174(ar))
+		ath10k_pci_override_ce_config(ar);
+
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",