diff options
| author | Florian Fainelli <f.fainelli@gmail.com> | 2015-10-29 18:11:35 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-11-01 15:54:50 -0500 |
| commit | 5dbebbb44a6ad94aab2cd1a46f7676f255403f64 (patch) | |
| tree | 03935cc66e724ca53a2357a705ef177a8c78999a /drivers/net/ethernet/broadcom/genet | |
| parent | b43c142f22236b37aa68faf23ac1bbd75f94c5b5 (diff) | |
| download | talos-obmc-linux-5dbebbb44a6ad94aab2cd1a46f7676f255403f64.tar.gz talos-obmc-linux-5dbebbb44a6ad94aab2cd1a46f7676f255403f64.zip | |
net: bcmgenet: Software reset EPHY after power on
The EPHY on GENET v1->v3 is extremely finicky, and will show occasional
failures based on the timing and reset sequence, ranging from duplicate
packets, to extremely high latencies.
Perform an additional software reset, and re-configuration to make sure it is
in a consistent and working state.
Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet')
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 18 |
3 files changed, 22 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 1805541b4240..5e3cd76cb69b 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -907,8 +907,10 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv, } bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - if (mode == GENET_POWER_PASSIVE) + if (mode == GENET_POWER_PASSIVE) { bcmgenet_phy_power_set(priv->dev, true); + bcmgenet_mii_reset(priv->dev); + } } /* ioctl handle special commands that are not present in ethtool. */ diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 7299d1075422..c739f7ebc992 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -674,6 +674,7 @@ int bcmgenet_mii_init(struct net_device *dev); int bcmgenet_mii_config(struct net_device *dev); int bcmgenet_mii_probe(struct net_device *dev); void bcmgenet_mii_exit(struct net_device *dev); +void bcmgenet_mii_reset(struct net_device *dev); void bcmgenet_phy_power_set(struct net_device *dev, bool enable); void bcmgenet_mii_setup(struct net_device *dev); diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index c8affad76f36..8bdfe53754ba 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -163,6 +163,7 @@ void bcmgenet_mii_setup(struct net_device *dev) phy_print_status(phydev); } + static int bcmgenet_fixed_phy_link_update(struct net_device *dev, struct fixed_phy_status *status) { @@ -172,6 +173,22 @@ static int bcmgenet_fixed_phy_link_update(struct net_device *dev, return 0; } +/* Perform a voluntary PHY software reset, since the EPHY is very finicky about + * not doing it and will start corrupting packets + */ +void bcmgenet_mii_reset(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + + if (GENET_IS_V4(priv)) + return; + + if (priv->phydev) { + phy_init_hw(priv->phydev); + phy_start_aneg(priv->phydev); + } +} + void bcmgenet_phy_power_set(struct net_device *dev, bool enable) { struct bcmgenet_priv *priv = netdev_priv(dev); @@ -214,6 +231,7 @@ static void bcmgenet_internal_phy_setup(struct net_device *dev) reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); reg |= EXT_PWR_DN_EN_LD; bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); + bcmgenet_mii_reset(dev); } static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) |
