summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2012-02-02 13:54:25 +0200
committerDavid Woodhouse <David.Woodhouse@intel.com>2012-02-04 08:04:57 +0000
commit500823195d0c9eec2a4637484f30cc93ec633d4a (patch)
tree9fa140cfce10567d10f5e7e708f71193ff9ec228 /drivers/mtd/nand
parent1a30871fe635d3e92972e6b93e39ff65bb57e52d (diff)
downloadtalos-obmc-linux-500823195d0c9eec2a4637484f30cc93ec633d4a.tar.gz
talos-obmc-linux-500823195d0c9eec2a4637484f30cc93ec633d4a.zip
Revert "mtd: atmel_nand: optimize read/write buffer functions"
This reverts commit fb5427508abbd635e877fabdf55795488119c2d6. The reason is that it breaks 16 bits NAND flash as it was reported by Nikolaus Voss and confirmed by Eric Bénard. Nicolas Ferre <nicolas.ferre@atmel.com> alco confirmed: "After double checking with designers, I must admit that I misunderstood the way of optimizing accesses to SMC. 16 bit nand is not so common those days..." Reported-by: Nikolaus Voss <n.voss@weinmann.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org [3.1+]
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/atmel_nand.c45
1 files changed, 41 insertions, 4 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 4dd056e2e16a..35b4fb55dbd6 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -161,6 +161,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
!!host->board->rdy_pin_active_low;
}
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
static void dma_complete_func(void *completion)
{
complete(completion);
@@ -235,27 +266,33 @@ err_buf:
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_fromio(buf, chip->IO_ADDR_R, len);
+ if (host->board->bus_width_16)
+ atmel_read_buf16(mtd, buf, len);
+ else
+ atmel_read_buf8(mtd, buf, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_toio(chip->IO_ADDR_W, buf, len);
+ if (host->board->bus_width_16)
+ atmel_write_buf16(mtd, buf, len);
+ else
+ atmel_write_buf8(mtd, buf, len);
}
/*
OpenPOWER on IntegriCloud