Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Some documentation updates and a few new pixel formats

 - Stop btcx-risc abuse by cx88 and move it to bt8xx driver

 - New platform driver: am437x

 - New webcam driver: toptek

 - New remote controller hardware protocols added to img-ir driver

 - Removal of a few very old drivers that relies on old kABIs and are
   for very hard to find hardware: parallel port webcam drivers
   (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino)

 - Removal of the USB Telegent driver (tlg2300).  The company that
   developed this driver has long gone and the hardware is hard to find.
   As it relies on a legacy set of kABI symbols and nobody seems to care
   about it, remove it.

 - several improvements at rtl2832 driver

 - conversion on cx28521 and au0828 to use videobuf2 (VB2)

 - several improvements, fixups and board additions

* tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  [media] dvb_net: Convert local hex dump to print_hex_dump_debug
  [media] dvb_net: Use standard debugging facilities
  [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses
  [media] staging: lirc_serial: adjust boolean assignments
  [media] stb0899: use sign_extend32() for sign extension
  [media] si2168: add support for 1.7MHz bandwidth
  [media] si2168: return error if set_frontend is called with invalid parameters
  [media] lirc_dev: avoid potential null-dereference
  [media] mn88472: simplify bandwidth registers setting code
  [media] dvb: tc90522: re-add symbol-rate report
  [media] lmedm04: add read snr, signal strength and ber call backs
  [media] lmedm04: Create frontend call back for read status
  [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks
  [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb
  [media] lmedm04: Increase Interupt due time to 200 msec
  [media] cx88-dvb: whitespace cleanup
  [media] rtl28xxu: properly initialize pdata
  [media] rtl2832: declare functions as static
  [media] rtl2830: declare functions as static
  [media] rtl2832_sdr: add kernel-doc comments for platform_data
  ...

1 files changed, 18 insertions, 32 deletions

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index 2fd9b5e0e2a9..930593d7028d 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2425,22 +2425,18 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
 	}
 	if (!hdw) goto fail;
 
-	init_timer(&hdw->quiescent_timer);
-	hdw->quiescent_timer.data = (unsigned long)hdw;
-	hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout;
+	setup_timer(&hdw->quiescent_timer, pvr2_hdw_quiescent_timeout,
+		    (unsigned long)hdw);
 
-	init_timer(&hdw->decoder_stabilization_timer);
-	hdw->decoder_stabilization_timer.data = (unsigned long)hdw;
-	hdw->decoder_stabilization_timer.function =
-		pvr2_hdw_decoder_stabilization_timeout;
+	setup_timer(&hdw->decoder_stabilization_timer,
+		    pvr2_hdw_decoder_stabilization_timeout,
+		    (unsigned long)hdw);
 
-	init_timer(&hdw->encoder_wait_timer);
-	hdw->encoder_wait_timer.data = (unsigned long)hdw;
-	hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout;
+	setup_timer(&hdw->encoder_wait_timer, pvr2_hdw_encoder_wait_timeout,
+		    (unsigned long)hdw);
 
-	init_timer(&hdw->encoder_run_timer);
-	hdw->encoder_run_timer.data = (unsigned long)hdw;
-	hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout;
+	setup_timer(&hdw->encoder_run_timer, pvr2_hdw_encoder_run_timeout,
+		    (unsigned long)hdw);
 
 	hdw->master_state = PVR2_STATE_DEAD;
 
@@ -3680,10 +3676,8 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
 	hdw->ctl_timeout_flag = 0;
 	hdw->ctl_write_pend_flag = 0;
 	hdw->ctl_read_pend_flag = 0;
-	init_timer(&timer);
+	setup_timer(&timer, pvr2_ctl_timeout, (unsigned long)hdw);
 	timer.expires = jiffies + timeout;
-	timer.data = (unsigned long)hdw;
-	timer.function = pvr2_ctl_timeout;
 
 	if (write_len) {
 		hdw->cmd_debug_state = 2;
@@ -4035,11 +4029,6 @@ int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw)
 }
 
 
-int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw)
-{
-	return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF);
-}
-
 
 int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
 {
@@ -4301,9 +4290,8 @@ static int state_eval_encoder_config(struct pvr2_hdw *hdw)
 				   the encoder. */
 				if (!hdw->state_encoder_waitok) {
 					hdw->encoder_wait_timer.expires =
-						jiffies +
-						(HZ * TIME_MSEC_ENCODER_WAIT
-						 / 1000);
+						jiffies + msecs_to_jiffies(
+						TIME_MSEC_ENCODER_WAIT);
 					add_timer(&hdw->encoder_wait_timer);
 				}
 			}
@@ -4426,8 +4414,8 @@ static int state_eval_encoder_run(struct pvr2_hdw *hdw)
 		if (pvr2_encoder_start(hdw) < 0) return !0;
 		hdw->state_encoder_run = !0;
 		if (!hdw->state_encoder_runok) {
-			hdw->encoder_run_timer.expires =
-				jiffies + (HZ * TIME_MSEC_ENCODER_OK / 1000);
+			hdw->encoder_run_timer.expires = jiffies +
+				 msecs_to_jiffies(TIME_MSEC_ENCODER_OK);
 			add_timer(&hdw->encoder_run_timer);
 		}
 	}
@@ -4518,9 +4506,8 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw)
 				   but before we did the pending check. */
 				if (!hdw->state_decoder_quiescent) {
 					hdw->quiescent_timer.expires =
-						jiffies +
-						(HZ * TIME_MSEC_DECODER_WAIT
-						 / 1000);
+						jiffies + msecs_to_jiffies(
+						TIME_MSEC_DECODER_WAIT);
 					add_timer(&hdw->quiescent_timer);
 				}
 			}
@@ -4544,9 +4531,8 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw)
 		hdw->state_decoder_run = !0;
 		if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) {
 			hdw->decoder_stabilization_timer.expires =
-				jiffies +
-				(HZ * TIME_MSEC_DECODER_STABILIZATION_WAIT /
-				 1000);
+				jiffies + msecs_to_jiffies(
+				TIME_MSEC_DECODER_STABILIZATION_WAIT);
 			add_timer(&hdw->decoder_stabilization_timer);
 		} else {
 			hdw->state_decoder_ready = !0;