Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:
 - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics
   Navpoint, LM8333 keypads, Wacom I2C touhscreen);
 - updates to existing touchpad drivers (ALPS, Sntelic);
 - Wacom driver now supports Intuos5;
 - device-tree bindings in numerous drivers;
 - other cleanups and fixes.

Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think
implies that the input layer device naming is broken, but let's see.  I
brough it up with Dmitry.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: matrix-keymap - fix building keymaps
  Input: spear-keyboard - document DT bindings
  Input: spear-keyboard - add device tree bindings
  Input: matrix-keymap - wire up device tree support
  Input: matrix-keymap - uninline and prepare for device tree support
  Input: adp5588 - add support for gpio names
  Input: omap-keypad - dynamically handle register offsets
  Input: synaptics - fix compile warning
  MAINTAINERS: adjust input-related patterns
  Input: ALPS - switch to using input_mt_report_finger_count
  Input: ALPS - add semi-MT support for v4 protocol
  Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
  Input: atmel_mxt_ts - dump each message on just 1 line
  Input: atmel_mxt_ts - do not read extra (checksum) byte
  Input: atmel_mxt_ts - verify object size in mxt_write_object
  Input: atmel_mxt_ts - only allow root to update firmware
  Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
  Input: sentelic - report device's production serial number
  Input: tl6040-vibra - Device Tree support
  Input: evdev - properly handle read/write with count 0
  ...

1 files changed, 282 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
new file mode 100644
index 000000000000..35572575d34a
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -0,0 +1,282 @@
+/*
+ * Wacom Penabled Driver for I2C
+ *
+ * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * <tobita.tatsunosuke@wacom.co.jp>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version of 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/unaligned.h>
+
+#define WACOM_CMD_QUERY0	0x04
+#define WACOM_CMD_QUERY1	0x00
+#define WACOM_CMD_QUERY2	0x33
+#define WACOM_CMD_QUERY3	0x02
+#define WACOM_CMD_THROW0	0x05
+#define WACOM_CMD_THROW1	0x00
+#define WACOM_QUERY_SIZE	19
+#define WACOM_RETRY_CNT		100
+
+struct wacom_features {
+	int x_max;
+	int y_max;
+	int pressure_max;
+	char fw_version;
+};
+
+struct wacom_i2c {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u8 data[WACOM_QUERY_SIZE];
+};
+
+static int wacom_query_device(struct i2c_client *client,
+			      struct wacom_features *features)
+{
+	int ret;
+	u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
+			WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
+	u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
+	u8 data[WACOM_QUERY_SIZE];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd1),
+			.buf = cmd1,
+		},
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd2),
+			.buf = cmd2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(data),
+			.buf = data,
+		},
+	};
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	features->x_max = get_unaligned_le16(&data[3]);
+	features->y_max = get_unaligned_le16(&data[5]);
+	features->pressure_max = get_unaligned_le16(&data[11]);
+	features->fw_version = get_unaligned_le16(&data[13]);
+
+	dev_dbg(&client->dev,
+		"x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
+		features->x_max, features->y_max,
+		features->pressure_max, features->fw_version);
+
+	return 0;
+}
+
+static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
+{
+	struct wacom_i2c *wac_i2c = dev_id;
+	struct input_dev *input = wac_i2c->input;
+	u8 *data = wac_i2c->data;
+	unsigned int x, y, pressure;
+	unsigned char tsw, f1, f2, ers;
+	int error;
+
+	error = i2c_master_recv(wac_i2c->client,
+				wac_i2c->data, sizeof(wac_i2c->data));
+	if (error < 0)
+		goto out;
+
+	tsw = data[3] & 0x01;
+	ers = data[3] & 0x04;
+	f1 = data[3] & 0x02;
+	f2 = data[3] & 0x10;
+	x = le16_to_cpup((__le16 *)&data[4]);
+	y = le16_to_cpup((__le16 *)&data[6]);
+	pressure = le16_to_cpup((__le16 *)&data[8]);
+
+	input_report_key(input, BTN_TOUCH, tsw || ers);
+	input_report_key(input, BTN_TOOL_PEN, tsw);
+	input_report_key(input, BTN_TOOL_RUBBER, ers);
+	input_report_key(input, BTN_STYLUS, f1);
+	input_report_key(input, BTN_STYLUS2, f2);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int wacom_i2c_open(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void wacom_i2c_close(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	disable_irq(client->irq);
+}
+
+static int __devinit wacom_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct wacom_i2c *wac_i2c;
+	struct input_dev *input;
+	struct wacom_features features;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -EIO;
+	}
+
+	error = wacom_query_device(client, &features);
+	if (error)
+		return error;
+
+	wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!wac_i2c || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	wac_i2c->client = client;
+	wac_i2c->input = input;
+
+	input->name = "Wacom I2C Digitizer";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x56a;
+	input->id.version = features.fw_version;
+	input->dev.parent = &client->dev;
+	input->open = wacom_i2c_open;
+	input->close = wacom_i2c_close;
+
+	input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOOL_PEN, input->keybit);
+	__set_bit(BTN_TOOL_RUBBER, input->keybit);
+	__set_bit(BTN_STYLUS, input->keybit);
+	__set_bit(BTN_STYLUS2, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     0, features.pressure_max, 0, 0);
+
+	input_set_drvdata(input, wac_i2c);
+
+	error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "wacom_i2c", wac_i2c);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ, error: %d\n", error);
+		goto err_free_mem;
+	}
+
+	/* Disable the IRQ, we'll enable it in wac_i2c_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(wac_i2c->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device, error: %d\n", error);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, wac_i2c);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, wac_i2c);
+err_free_mem:
+	input_free_device(input);
+	kfree(wac_i2c);
+
+	return error;
+}
+
+static int __devexit wacom_i2c_remove(struct i2c_client *client)
+{
+	struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
+
+	free_irq(client->irq, wac_i2c);
+	input_unregister_device(wac_i2c->input);
+	kfree(wac_i2c);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wacom_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int wacom_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
+
+static const struct i2c_device_id wacom_i2c_id[] = {
+	{ "WAC_I2C_EMR", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
+
+static struct i2c_driver wacom_i2c_driver = {
+	.driver	= {
+		.name	= "wacom_i2c",
+		.owner	= THIS_MODULE,
+		.pm	= &wacom_i2c_pm,
+	},
+
+	.probe		= wacom_i2c_probe,
+	.remove		= __devexit_p(wacom_i2c_remove),
+	.id_table	= wacom_i2c_id,
+};
+module_i2c_driver(wacom_i2c_driver);
+
+MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>");
+MODULE_DESCRIPTION("WACOM EMR I2C Driver");
+MODULE_LICENSE("GPL");