gma600: Enable HDMI support

There are still some mysteries left, in particular how (and in
fact if) the EDID is supposed to work on the HDMI port. However
the basic stuff now works and I can plug my Q550 into an HDMI
display and get the expected results.

[v2: cleans up space/tab and other formatting as per Dave's
 request]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

4 files changed, 365 insertions, 16 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail.h b/drivers/gpu/drm/gma500/oaktrail.h
index f2f9f38a5362..30adbbe23024 100644
--- a/drivers/gpu/drm/gma500/oaktrail.h
+++ b/drivers/gpu/drm/gma500/oaktrail.h
@@ -249,3 +249,9 @@ extern void oaktrail_hdmi_i2c_exit(struct pci_dev *dev);
 extern void oaktrail_hdmi_save(struct drm_device *dev);
 extern void oaktrail_hdmi_restore(struct drm_device *dev);
 extern void oaktrail_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev);
+extern int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+						struct drm_display_mode *adjusted_mode, int x, int y,
+						struct drm_framebuffer *old_fb);
+extern void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode);
+
+
diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c
index cdafd2acc72f..4ec2962f7635 100644
--- a/drivers/gpu/drm/gma500/oaktrail_crtc.c
+++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c
@@ -168,6 +168,11 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
 	const struct psb_offset *map = &dev_priv->regmap[pipe];
 	u32 temp;
 
+	if (pipe == 1) {
+		oaktrail_crtc_hdmi_dpms(crtc, mode);
+		return;
+	}
+
 	if (!gma_power_begin(dev, true))
 		return;
 
@@ -302,6 +307,9 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
 	uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
 	struct drm_connector *connector;
 
+	if (pipe == 1)
+		return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+
 	if (!gma_power_begin(dev, true))
 		return 0;
 
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 010b820744a5..08747fd7105c 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -544,7 +544,7 @@ const struct psb_ops oaktrail_chip_ops = {
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
-	.hdmi_mask = (1 << 0),
+	.hdmi_mask = (1 << 1),
 	.lvds_mask = (1 << 0),
 	.cursor_needs_phys = 0,
 	.sgx_offset = MRST_SGX_OFFSET,
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
index 69e51e903f35..f036f1fc161e 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -155,6 +155,345 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
 	HDMI_READ(HDMI_HCR);
 }
 
+static void wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	mdelay(20);
+}
+
+static unsigned int htotal_calculate(struct drm_display_mode *mode)
+{
+	u32 htotal, new_crtc_htotal;
+
+	htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
+
+	/*
+	 * 1024 x 768  new_crtc_htotal = 0x1024;
+	 * 1280 x 1024 new_crtc_htotal = 0x0c34;
+	 */
+	new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
+
+	DRM_DEBUG_KMS("new crtc htotal 0x%4x\n", new_crtc_htotal);
+	return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
+}
+
+static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target,
+				int refclk, struct oaktrail_hdmi_clock *best_clock)
+{
+	int np_min, np_max, nr_min, nr_max;
+	int np, nr, nf;
+
+	np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10);
+	np_max = oaktrail_hdmi_limit.vco.max / (target * 10);
+	if (np_min < oaktrail_hdmi_limit.np.min)
+		np_min = oaktrail_hdmi_limit.np.min;
+	if (np_max > oaktrail_hdmi_limit.np.max)
+		np_max = oaktrail_hdmi_limit.np.max;
+
+	nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
+	nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
+	if (nr_min < oaktrail_hdmi_limit.nr.min)
+		nr_min = oaktrail_hdmi_limit.nr.min;
+	if (nr_max > oaktrail_hdmi_limit.nr.max)
+		nr_max = oaktrail_hdmi_limit.nr.max;
+
+	np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
+	nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
+	nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
+	DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
+
+	/*
+	 * 1024 x 768  np = 1; nr = 0x26; nf = 0x0fd8000;
+	 * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
+	 */
+	best_clock->np = np;
+	best_clock->nr = nr - 1;
+	best_clock->nf = (nf << 14);
+}
+
+static void scu_busy_loop(void __iomem *scu_base)
+{
+	u32 status = 0;
+	u32 loop_count = 0;
+
+	status = readl(scu_base + 0x04);
+	while (status & 1) {
+		udelay(1); /* scu processing time is in few u secods */
+		status = readl(scu_base + 0x04);
+		loop_count++;
+		/* break if scu doesn't reset busy bit after huge retry */
+		if (loop_count > 1000) {
+			DRM_DEBUG_KMS("SCU IPC timed out");
+			return;
+		}
+	}
+}
+
+/*
+ *	You don't want to know, you really really don't want to know....
+ *
+ *	This is magic. However it's safe magic because of the way the platform
+ *	works and it is necessary magic.
+ */
+static void oaktrail_hdmi_reset(struct drm_device *dev)
+{
+	void __iomem *base;
+	unsigned long scu_ipc_mmio = 0xff11c000UL;
+	int scu_len = 1024;
+
+	base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
+	if (base == NULL) {
+		DRM_ERROR("failed to map scu mmio\n");
+		return;
+	}
+
+	/* scu ipc: assert hdmi controller reset */
+	writel(0xff11d118, base + 0x0c);
+	writel(0x7fffffdf, base + 0x80);
+	writel(0x42005, base + 0x0);
+	scu_busy_loop(base);
+
+	/* scu ipc: de-assert hdmi controller reset */
+	writel(0xff11d118, base + 0x0c);
+	writel(0x7fffffff, base + 0x80);
+	writel(0x42005, base + 0x0);
+	scu_busy_loop(base);
+
+	iounmap(base);
+}
+
+int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode,
+			    int x, int y,
+			    struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+	int pipe = 1;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int refclk;
+	struct oaktrail_hdmi_clock clock;
+	u32 dspcntr, pipeconf, dpll, temp;
+	int dspcntr_reg = DSPBCNTR;
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	/* Disable the VGA plane that we never use */
+	REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+	/* Disable dpll if necessary */
+	dpll = REG_READ(DPLL_CTRL);
+	if ((dpll & DPLL_PWRDN) == 0) {
+		REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
+		REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
+		REG_WRITE(DPLL_STATUS, 0x1);
+	}
+	udelay(150);
+
+	/* Reset controller */
+	oaktrail_hdmi_reset(dev);
+
+	/* program and enable dpll */
+	refclk = 25000;
+	oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
+
+	/* Set the DPLL */
+	dpll = REG_READ(DPLL_CTRL);
+	dpll &= ~DPLL_PDIV_MASK;
+	dpll &= ~(DPLL_PWRDN | DPLL_RESET);
+	REG_WRITE(DPLL_CTRL, 0x00000008);
+	REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
+	REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
+	REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
+	REG_WRITE(DPLL_UPDATE, 0x80000000);
+	REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
+	udelay(150);
+
+	/* configure HDMI */
+	HDMI_WRITE(0x1004, 0x1fd);
+	HDMI_WRITE(0x2000, 0x1);
+	HDMI_WRITE(0x2008, 0x0);
+	HDMI_WRITE(0x3130, 0x8);
+	HDMI_WRITE(0x101c, 0x1800810);
+
+	temp = htotal_calculate(adjusted_mode);
+	REG_WRITE(htot_reg, temp);
+	REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) |  (mode->crtc_vdisplay - 1));
+
+	REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
+	REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+	REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	REG_WRITE(PCH_PIPEBSRC, ((mode->crtc_hdisplay - 1) << 16) |  (mode->crtc_vdisplay - 1));
+
+	temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
+	HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) |  temp);
+
+	REG_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	REG_WRITE(dsppos_reg, 0);
+
+	/* Flush the plane changes */
+	{
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+	}
+
+	/* Set up the display plane register */
+	dspcntr = REG_READ(dspcntr_reg);
+	dspcntr |= DISPPLANE_GAMMA_ENABLE;
+	dspcntr |= DISPPLANE_SEL_PIPE_B;
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+
+	/* setup pipeconf */
+	pipeconf = REG_READ(pipeconf_reg);
+	pipeconf |= PIPEACONF_ENABLE;
+
+	REG_WRITE(pipeconf_reg, pipeconf);
+	REG_READ(pipeconf_reg);
+
+	REG_WRITE(PCH_PIPEBCONF, pipeconf);
+	REG_READ(PCH_PIPEBCONF);
+	wait_for_vblank(dev);
+
+	REG_WRITE(dspcntr_reg, dspcntr);
+	wait_for_vblank(dev);
+
+	gma_power_end(dev);
+
+	return 0;
+}
+
+void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	u32 temp;
+
+	DRM_DEBUG_KMS("%s %d\n", __func__, mode);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_OFF:
+		REG_WRITE(VGACNTRL, 0x80000000);
+
+		/* Disable plane */
+		temp = REG_READ(DSPBCNTR);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
+			REG_READ(DSPBCNTR);
+			/* Flush the plane changes */
+			REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+			REG_READ(DSPBSURF);
+		}
+
+		/* Disable pipe B */
+		temp = REG_READ(PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+			REG_READ(PIPEBCONF);
+		}
+
+		/* Disable LNW Pipes, etc */
+		temp = REG_READ(PCH_PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+			REG_READ(PCH_PIPEBCONF);
+		}
+
+		/* wait for pipe off */
+		udelay(150);
+
+		/* Disable dpll */
+		temp = REG_READ(DPLL_CTRL);
+		if ((temp & DPLL_PWRDN) == 0) {
+			REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
+			REG_WRITE(DPLL_STATUS, 0x1);
+		}
+
+		/* wait for dpll off */
+		udelay(150);
+
+		break;
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable dpll */
+		temp = REG_READ(DPLL_CTRL);
+		if ((temp & DPLL_PWRDN) != 0) {
+			REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
+			temp = REG_READ(DPLL_CLK_ENABLE);
+			REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
+			REG_READ(DPLL_CLK_ENABLE);
+		}
+		/* wait for dpll warm up */
+		udelay(150);
+
+		/* Enable pipe B */
+		temp = REG_READ(PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
+			REG_READ(PIPEBCONF);
+		}
+
+		/* Enable LNW Pipe B */
+		temp = REG_READ(PCH_PIPEBCONF);
+		if ((temp & PIPEACONF_ENABLE) == 0) {
+			REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
+			REG_READ(PCH_PIPEBCONF);
+		}
+
+		wait_for_vblank(dev);
+
+		/* Enable plane */
+		temp = REG_READ(DSPBCNTR);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+			REG_READ(DSPBSURF);
+		}
+
+		psb_intel_crtc_load_lut(crtc);
+	}
+
+	/* DSPARB */
+	REG_WRITE(DSPARB, 0x00003fbf);
+
+	/* FW1 */
+	REG_WRITE(0x70034, 0x3f880a0a);
+
+	/* FW2 */
+	REG_WRITE(0x70038, 0x0b060808);
+
+	/* FW4 */
+	REG_WRITE(0x70050, 0x08030404);
+
+	/* FW5 */
+	REG_WRITE(0x70054, 0x04040404);
+
+	/* LNC Chicken Bits - Squawk! */
+	REG_WRITE(0x70400, 0x4000);
+
+	return;
+}
+
 static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
 {
 	static int dpms_mode = -1;
@@ -233,13 +572,15 @@ static const unsigned char raw_edid[] = {
 
 static int oaktrail_hdmi_get_modes(struct drm_connector *connector)
 {
-	struct drm_device *dev = connector->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct i2c_adapter *i2c_adap;
 	struct edid *edid;
-	struct drm_display_mode *mode, *t;
-	int i = 0, ret = 0;
+	int ret = 0;
 
+	/*
+	 *	FIXME: We need to figure this lot out. In theory we can
+	 *	read the EDID somehow but I've yet to find working reference
+	 *	code.
+	 */
 	i2c_adap = i2c_get_adapter(3);
 	if (i2c_adap == NULL) {
 		DRM_ERROR("No ddc adapter available!\n");
@@ -253,17 +594,7 @@ static int oaktrail_hdmi_get_modes(struct drm_connector *connector)
 		drm_mode_connector_update_edid_property(connector, edid);
 		ret = drm_add_edid_modes(connector, edid);
 	}
-
-	/*
-	 * prune modes that require frame buffer bigger than stolen mem
-	 */
-	list_for_each_entry_safe(mode, t, &connector->probed_modes, head) {
-		if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) {
-			i++;
-			drm_mode_remove(connector, mode);
-		}
-	}
-	return ret - i;
+	return ret;
 }
 
 static void oaktrail_hdmi_mode_set(struct drm_encoder *encoder,
@@ -349,6 +680,7 @@ void oaktrail_hdmi_init(struct drm_device *dev,
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 	drm_sysfs_connector_add(connector);
+	dev_info(dev->dev, "HDMI initialised.\n");
 
 	return;
 
@@ -403,6 +735,9 @@ void oaktrail_hdmi_setup(struct drm_device *dev)
 
 	dev_priv->hdmi_priv = hdmi_dev;
 	oaktrail_hdmi_audio_disable(dev);
+
+	dev_info(dev->dev, "HDMI hardware present.\n");
+
 	return;
 
 free: