gma500: Add support for Cedarview

Again this is similar but has some differences so we have a set of plug in
support. This does make the driver bigger than is needed in some respects
but the tradeoff for maintainability is huge.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 721 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
new file mode 100644
index 000000000000..988b2d0acf43
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -0,0 +1,721 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+#include "cdv_device.h"
+
+/**
+ * LVDS I2C backlight control macros
+ */
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK 0xFF
+#define BLC_I2C_TYPE	0x01
+#define BLC_PWM_TYPT	0x02
+
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+
+#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
+#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)
+#define PSB_BLC_PWM_PRECISION_FACTOR	(10)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+
+struct cdv_intel_lvds_priv {
+	/**
+	 * Saved LVDO output states
+	 */
+	uint32_t savePP_ON;
+	uint32_t savePP_OFF;
+	uint32_t saveLVDS;
+	uint32_t savePP_CONTROL;
+	uint32_t savePP_CYCLE;
+	uint32_t savePFIT_CONTROL;
+	uint32_t savePFIT_PGM_RATIOS;
+	uint32_t saveBLC_PWM_CTL;
+};
+
+/*
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 retval;
+
+	if (gma_power_begin(dev, false)) {
+		retval = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		retval = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return retval;
+}
+
+/*
+ * Set LVDS backlight level by I2C command
+ */
+static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
+					unsigned int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
+	u8 out_buf[2];
+	unsigned int blc_i2c_brightness;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = lvds_i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		}
+	};
+
+	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
+			     BRIGHTNESS_MASK /
+			     BRIGHTNESS_MAX_LEVEL);
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
+
+	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
+	out_buf[1] = (u8)blc_i2c_brightness;
+
+	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
+		return 0;
+
+	DRM_ERROR("I2C transfer error\n");
+	return -1;
+}
+
+
+static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	u32 max_pwm_blc;
+	u32 blc_pwm_duty_cycle;
+
+	max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
+
+	/*BLC_PWM_CTL Should be initiated while backlight device init*/
+	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
+
+	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
+
+	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+	REG_WRITE(BLC_PWM_CTL,
+		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
+		  (blc_pwm_duty_cycle));
+
+	return 0;
+}
+
+/*
+ * Set LVDS backlight level either by I2C or PWM
+ */
+void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->lvds_bl) {
+		DRM_ERROR("NO LVDS Backlight Info\n");
+		return;
+	}
+
+	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
+		cdv_lvds_i2c_set_brightness(dev, level);
+	else
+		cdv_lvds_pwm_set_brightness(dev, level);
+}
+
+/**
+ * Sets the backlight level.
+ *
+ * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
+ */
+static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	if (gma_power_begin(dev, false)) {
+		blc_pwm_ctl =
+			REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+		REG_WRITE(BLC_PWM_CTL,
+				(blc_pwm_ctl |
+				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+		gma_power_end(dev);
+	} else {
+		blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
+				~BACKLIGHT_DUTY_CYCLE_MASK;
+		dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
+					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
+	}
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void cdv_intel_lvds_set_power(struct drm_device *dev,
+				 struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		cdv_intel_lvds_set_backlight(dev,
+					 output->
+					 mode_dev->backlight_duty_cycle);
+	} else {
+		cdv_intel_lvds_set_backlight(dev, 0);
+
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	if (mode == DRM_MODE_DPMS_ON)
+		cdv_intel_lvds_set_power(dev, output, true);
+	else
+		cdv_intel_lvds_set_power(dev, output, false);
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void cdv_intel_lvds_save(struct drm_connector *connector)
+{
+}
+
+static void cdv_intel_lvds_restore(struct drm_connector *connector)
+{
+}
+
+int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+	struct drm_display_mode *fixed_mode =
+	    psb_intel_output->mode_dev->panel_fixed_mode;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	if (fixed_mode) {
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+	return MODE_OK;
+}
+
+bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+	    enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct drm_encoder *tmp_encoder;
+	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
+			    head) {
+		if (tmp_encoder != encoder
+		    && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
+		adjusted_mode->clock = panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode,
+				      CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+
+	cdv_intel_lvds_set_power(dev, output, false);
+
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+		    cdv_intel_lvds_get_max_backlight(dev);
+
+	cdv_intel_lvds_set_power(dev, output, true);
+}
+
+static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.
+ * This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status cdv_intel_lvds_detect(
+				struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_mode_device *mode_dev =
+					psb_intel_output->mode_dev;
+	int ret;
+
+	ret = psb_intel_ddc_get_modes(psb_intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+	if (mode_dev->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode =
+		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * cdv_intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+void cdv_intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+int cdv_intel_lvds_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *crtc =
+					to_psb_intel_crtc(encoder->crtc);
+		uint64_t curValue;
+
+		if (!crtc)
+			return -1;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			return -1;
+		}
+
+		if (drm_connector_property_get_value(connector,
+						     property,
+						     &curValue))
+			return -1;
+
+		if (curValue == value)
+			return 0;
+
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (!drm_crtc_helper_set_mode(encoder->crtc,
+						      &crtc->saved_mode,
+						      encoder->crtc->x,
+						      encoder->crtc->y,
+						      encoder->crtc->fb))
+				return -1;
+		}
+	} else if (!strcmp(property->name, "backlight") && encoder) {
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+		else {
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+			struct drm_psb_private *dev_priv =
+						encoder->dev->dev_private;
+			struct backlight_device *bd =
+						dev_priv->backlight_device;
+			bd->props.brightness = value;
+			backlight_update_status(bd);
+#endif
+		}
+	} else if (!strcmp(property->name, "DPMS") && encoder) {
+		struct drm_encoder_helper_funcs *helpers =
+					encoder->helper_private;
+		helpers->dpms(encoder, value);
+	}
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs
+					cdv_intel_lvds_helper_funcs = {
+	.dpms = cdv_intel_lvds_encoder_dpms,
+	.mode_fixup = cdv_intel_lvds_mode_fixup,
+	.prepare = cdv_intel_lvds_prepare,
+	.mode_set = cdv_intel_lvds_mode_set,
+	.commit = cdv_intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_lvds_connector_helper_funcs = {
+	.get_modes = cdv_intel_lvds_get_modes,
+	.mode_valid = cdv_intel_lvds_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = cdv_intel_lvds_save,
+	.restore = cdv_intel_lvds_restore,
+	.detect = cdv_intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = cdv_intel_lvds_set_property,
+	.destroy = cdv_intel_lvds_destroy,
+};
+
+
+static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
+	.destroy = cdv_intel_lvds_enc_destroy,
+};
+
+/**
+ * cdv_intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void cdv_intel_lvds_init(struct drm_device *dev,
+		     struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct cdv_intel_lvds_priv *lvds_priv;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan;
+	struct drm_crtc *crtc;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 lvds;
+	int pipe;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
+
+	psb_intel_output->dev_priv = lvds_priv;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+
+
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &cdv_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc,
+			 &cdv_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &cdv_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/*Attach connector properties*/
+	drm_connector_attach_property(connector,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+				      dev_priv->backlight_property,
+				      BRIGHTNESS_MAX_LEVEL);
+
+	/**
+	 * Set up I2C bus
+	 * FIXME: distroy i2c_bus when exit
+	 */
+	psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
+							 GPIOB,
+							 "LVDSBLC_B");
+	if (!psb_intel_output->i2c_bus) {
+		dev_printk(KERN_ERR,
+			&dev->pdev->dev, "I2C bus registration failed.\n");
+		goto failed_blc_i2c;
+	}
+	psb_intel_output->i2c_bus->slave_addr = 0x2C;
+	dev_priv->lvds_i2c_bus =  psb_intel_output->i2c_bus;
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+							 GPIOC,
+							 "LVDSDDC_C");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev,
+			   "DDC bus registration " "failed.\n");
+		goto failed_ddc;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	psb_intel_ddc_get_modes(psb_intel_output);
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			mode_dev->panel_fixed_mode =
+			    drm_mode_duplicate(dev, scan);
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? do we need this?*/
+	if (dev_priv->lfp_lvds_vbt_mode) {
+		mode_dev->panel_fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.	If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = REG_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		mode_dev->panel_fixed_mode =
+		    cdv_intel_crtc_mode_get(dev, crtc);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+			    DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		DRM_DEBUG
+			("Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	printk(KERN_ERR "Failed find\n");
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+failed_ddc:
+	printk(KERN_ERR "Failed DDC\n");
+	if (psb_intel_output->i2c_bus)
+		psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+failed_blc_i2c:
+	printk(KERN_ERR "Failed BLC\n");
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}