clk-divider: make sure read-only dividers do not write to their register

Commit e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1") removed
the special ops struct for read-only clocks and instead opted to handle
them inside the regular ops.

On the rk3368 this results in breakage as aclkm now gets set a value.
While it is the same divider value, the A53 core still doesn't like it,
which can result in the cpu ending up in a hang.
The reason being that "ACLKENMasserts one clock cycle before the rising
edge of ACLKM" and the clock should only be touched when STANDBYWFIL2
is asserted.

To fix this, reintroduce the read-only ops but do include the round_rate
callback. That way no writes that may be unsafe are done to the divider
register in any case.

The Rockchip use of the clk_divider_ops is adapted to this split again,
as is the nxp, lpc18xx-ccu driver that was included since the original
commit. On lpc18xx-ccu the divider seems to always be read-only
so only uses the new ops now.

Fixes: e6d5e7d90be9 ("clk-divider: Fix READ_ONLY when divider > 1")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/clk/nxp/clk-lpc18xx-ccu.c b/drivers/clk/nxp/clk-lpc18xx-ccu.c
index 13aabbb3acbe..558da89555af 100644
--- a/drivers/clk/nxp/clk-lpc18xx-ccu.c
+++ b/drivers/clk/nxp/clk-lpc18xx-ccu.c
@@ -222,7 +222,7 @@ static void lpc18xx_ccu_register_branch_gate_div(struct lpc18xx_clk_branch *bran
 		div->width = 1;
 
 		div_hw = &div->hw;
-		div_ops = &clk_divider_ops;
+		div_ops = &clk_divider_ro_ops;
 	}
 
 	branch->gate.reg = branch->offset + reg_base;