Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

36 files changed, 104 insertions, 139 deletions

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9b504af2e966..775361f67bfd 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -555,8 +555,7 @@ config NR_CPUS
           with working support have a maximum of 4 CPUs.
 
 config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Discontiguous Memory Support"
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2f66b2e42490..f410cb16dd22 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1530,7 +1530,6 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	depends on SMP && !XIP_KERNEL
 	default y
 	help
@@ -1731,7 +1730,7 @@ config AEABI
 
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
+	depends on AEABI && !THUMB2_KERNEL
 	default y
 	help
 	  This option preserves the old syscall interface along with the
@@ -1855,7 +1854,6 @@ config SECCOMP
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	help
 	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
@@ -1872,7 +1870,7 @@ config XEN_DOM0
 
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ARM && OF
+	depends on ARM && OF
 	depends on CPU_V7 && !CPU_V6
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
@@ -1941,7 +1939,7 @@ config ZBOOT_ROM
 
 choice
 	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
-	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+	depends on ZBOOT_ROM && ARCH_SH7372
 	default ZBOOT_ROM_NONE
 	help
 	  Include experimental SD/MMC loading code in the ROM-able zImage.
@@ -1970,7 +1968,7 @@ endchoice
 
 config ARM_APPENDED_DTB
 	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
-	depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+	depends on OF && !ZBOOT_ROM
 	help
 	  With this option, the boot code will look for a device tree binary
 	  (DTB) appended to zImage
@@ -2088,7 +2086,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
+	depends on (!SMP || HOTPLUG_CPU)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -2110,7 +2108,6 @@ config ATAGS_PROC
 
 config CRASH_DUMP
 	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	help
 	  Generate crash dump after being started by kexec. This should
 	  be normally only set in special crash dump kernels which are
@@ -2177,7 +2174,7 @@ config CPU_FREQ_S3C
 
 config CPU_FREQ_S3C24XX
 	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
+	depends on ARCH_S3C24XX && CPU_FREQ
 	select CPU_FREQ_S3C
 	help
 	  This enables the CPUfreq driver for the Samsung S3C24XX family
@@ -2189,7 +2186,7 @@ config CPU_FREQ_S3C24XX
 
 config CPU_FREQ_S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	depends on CPU_FREQ_S3C24XX
 	help
 	  Compile in support for changing the PLL frequency from the
 	  S3C24XX series CPUfreq driver. The PLL takes time to settle
@@ -2252,7 +2249,7 @@ config FPE_NWFPE_XP
 
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
-	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
+	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
 	---help---
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 661030d6bc6c..fc2a591e1676 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -32,7 +32,7 @@ config FRAME_POINTER
 
 config ARM_UNWIND
 	bool "Enable stack unwinding support (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL
+	depends on AEABI
 	default y
 	help
 	  This option enables stack unwinding support in the kernel
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 8033cb747c86..64bac53da0e8 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1134,11 +1134,9 @@ static int gpmc_probe(struct platform_device *pdev)
 	phys_base = res->start;
 	mem_size = resource_size(res);
 
-	gpmc_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!gpmc_base) {
-		dev_err(&pdev->dev, "error: request memory / ioremap\n");
-		return -EADDRNOTAVAIL;
-	}
+	gpmc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(gpmc_base))
+		return PTR_ERR(gpmc_base);
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res == NULL)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 25df14a9e268..3445c4f42347 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -291,8 +291,8 @@ config MACH_JIVE
 	  Say Y here if you are using the Logitech Jive.
 
 config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
-	depends on MACH_JIVE && EXPERIMENTAL
+	bool "Allow access to bootloader partitions in MTD"
+	depends on MACH_JIVE
 
 config MACH_S3C2413
 	bool
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index e18aa2f83ebf..ce7ce42a1ac9 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -312,11 +312,9 @@ static int tegra_emc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	emc_regbase = devm_request_and_ioremap(&pdev->dev, res);
-	if (!emc_regbase) {
-		dev_err(&pdev->dev, "failed to remap registers\n");
-		return -ENOMEM;
-	}
+	emc_regbase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(emc_regbase))
+		return PTR_ERR(emc_regbase);
 
 	pdata = pdev->dev.platform_data;
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7b433f3bddca..a0daa2fb5de6 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -808,11 +808,9 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 		return  -ENOMEM;
 	}
 
-	timer->io_base = devm_request_and_ioremap(dev, mem);
-	if (!timer->io_base) {
-		dev_err(dev, "%s: region already claimed.\n", __func__);
-		return -ENOMEM;
-	}
+	timer->io_base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(timer->io_base))
+		return PTR_ERR(timer->io_base);
 
 	if (dev->of_node) {
 		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 2d676ab50f73..ca07cb1b155a 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -386,11 +386,9 @@ static int s3c_adc_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-	adc->regs = devm_request_and_ioremap(dev, regs);
-	if (!adc->regs) {
-		dev_err(dev, "failed to map registers\n");
-		return -ENXIO;
-	}
+	adc->regs = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(adc->regs))
+		return PTR_ERR(adc->regs);
 
 	ret = regulator_enable(adc->vdd);
 	if (ret)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 67e4aaad78f5..e98f3248c8aa 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -560,8 +560,7 @@ choice
 	  accurate - This option is therefore marked experimental.
 
 config BFIN_KERNEL_CLOCK_MEMINIT_CALC
-	bool "Calculate Timings (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Calculate Timings"
 
 config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
 	bool "Provide accurate Timings based on target SCLK"
@@ -1118,7 +1117,7 @@ endchoice
 
 comment "Memory Protection Unit"
 config MPU
-	bool "Enable the memory protection unit (EXPERIMENTAL)"
+	bool "Enable the memory protection unit"
 	default n
 	help
 	  Use the processor's MPU to protect applications from accessing
@@ -1440,7 +1439,6 @@ config BFIN_CPU_FREQ
 
 config CPU_VOLTAGE
 	bool "CPU Voltage scaling"
-	depends on EXPERIMENTAL
 	depends on CPU_FREQ
 	default n
 	help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index de43aadcdbc4..af4a486dadcd 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -680,7 +680,7 @@ config ETRAX_SPI_MMC_BOARD
 
 config SPI_ETRAX_SSER
 	tristate
-	depends on SPI_MASTER && ETRAX_ARCH_V32 && EXPERIMENTAL
+	depends on SPI_MASTER && ETRAX_ARCH_V32
 	select SPI_BITBANG
 	help
 	  This enables using an synchronous serial (sser) port as a
@@ -689,7 +689,7 @@ config SPI_ETRAX_SSER
 
 config SPI_ETRAX_GPIO
 	tristate
-	depends on SPI_MASTER && ETRAX_ARCH_V32 && EXPERIMENTAL
+	depends on SPI_MASTER && ETRAX_ARCH_V32
 	select SPI_BITBANG
 	help
 	  This enables using GPIO pins port as a SPI master controller
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 00c2e88f7755..c1b80fb6938d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -374,8 +374,8 @@ config NR_CPUS
 	  performance hit.
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && EXPERIMENTAL
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
 	select HOTPLUG
 	default n
 	---help---
@@ -554,8 +554,8 @@ config IA64_HP_AML_NFW
 source "drivers/sn/Kconfig"
 
 config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	bool "kexec system call"
+	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index e7947528aee6..2cd225f8c68d 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -20,7 +20,7 @@ if VIRTUALIZATION
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on BROKEN
-	depends on HAVE_KVM && MODULES && EXPERIMENTAL
+	depends on HAVE_KVM && MODULES
 	# for device assignment:
 	depends on PCI
 	depends on BROKEN
diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig
index 515e0826803a..5d8a06b0ddf7 100644
--- a/arch/ia64/xen/Kconfig
+++ b/arch/ia64/xen/Kconfig
@@ -5,7 +5,7 @@
 config XEN
 	bool "Xen hypervisor support"
 	default y
-	depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
+	depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB
 	select XEN_XENCOMM
 	select NO_IDLE_HZ
 	# followings are required to save/restore.
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index 669c7eec293e..b1747211b8b1 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -20,7 +20,7 @@ endchoice
 
 config SELFMOD
 	bool "Use self modified code for intc/timer"
-	depends on EXPERIMENTAL && NO_MMU
+	depends on NO_MMU
 	default n
 	help
 	  This choice enables self-modified code for interrupt controller
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9becc44d9d7a..5d7170bfeb28 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -169,7 +169,7 @@ config MACH_DECSTATION
 	select SYS_HAS_CPU_R3000
 	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_128HZ
 	select SYS_SUPPORTS_256HZ
@@ -205,7 +205,7 @@ config MACH_JAZZ
 	select ISA
 	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_100HZ
 	help
 	 This a family of machines based on the MIPS R4030 chipset which was
@@ -395,7 +395,6 @@ config PNX8550_STB810
 
 config PMC_MSP
 	bool "PMC-Sierra MSP chipsets"
-	depends on EXPERIMENTAL
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -494,8 +493,7 @@ config SGI_IP27
 	  here.
 
 config SGI_IP28
-	bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "SGI IP28 (Indigo2 R10k)"
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
@@ -553,7 +551,6 @@ config SGI_IP32
 
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_BCM1120
@@ -564,7 +561,6 @@ config SIBYTE_CRHINE
 
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_BCM1120
@@ -575,7 +571,6 @@ config SIBYTE_CARMEL
 
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_BCM1125
@@ -587,7 +582,6 @@ config SIBYTE_CRHONE
 
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_BCM1125H
@@ -612,7 +606,6 @@ config SIBYTE_SWARM
 
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
@@ -626,7 +619,6 @@ config SIBYTE_LITTLESUR
 
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_2
@@ -675,7 +667,7 @@ config SNI_RM
 	select R5000_CPU_SCACHE
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -779,7 +771,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 
 config NLM_XLR_BOARD
 	bool "Netlogic XLR/XLS based systems"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLR
@@ -808,7 +799,6 @@ config NLM_XLR_BOARD
 
 config NLM_XLP_BOARD
 	bool "Netlogic XLP based systems"
-	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLP
@@ -1374,7 +1364,6 @@ config CPU_R5500
 
 config CPU_R6000
 	bool "R6000"
-	depends on EXPERIMENTAL
 	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
@@ -1392,7 +1381,6 @@ config CPU_NEVADA
 
 config CPU_R8000
 	bool "R8000"
-	depends on EXPERIMENTAL
 	depends on SYS_HAS_CPU_R8000
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1767,7 +1755,7 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
+	depends on CPU_R8000 || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
@@ -1794,7 +1782,7 @@ config PAGE_SIZE_32KB
 
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX
 	help
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
@@ -2310,8 +2298,7 @@ config HZ
 source "kernel/Kconfig.preempt"
 
 config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Kexec system call"
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index 1f372b0d2559..fb1e072da30b 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -1,6 +1,6 @@
 config ACER_PICA_61
-	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-	depends on MACH_JAZZ && EXPERIMENTAL
+	bool "Support for Acer PICA 1 chipset"
+	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -13,7 +13,7 @@ config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index e44a1866653f..08f7ebd9c774 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -21,6 +21,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <lantiq_soc.h>
 #include <xway_dma.h>
@@ -223,8 +224,8 @@ ltq_dma_init(struct platform_device *pdev)
 		panic("Failed to get dma resource");
 
 	/* remap dma register range */
-	ltq_dma_membase = devm_request_and_ioremap(&pdev->dev, res);
-	if (!ltq_dma_membase)
+	ltq_dma_membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ltq_dma_membase))
 		panic("Failed to remap dma resource");
 
 	/* power up and reset the dma engine */
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
index e30b1ed1b936..9861c8669fab 100644
--- a/arch/mips/lantiq/xway/gptu.c
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -150,11 +150,9 @@ static int gptu_probe(struct platform_device *pdev)
 	}
 
 	/* remap gptu register range */
-	gptu_membase = devm_request_and_ioremap(&pdev->dev, res);
-	if (!gptu_membase) {
-		dev_err(&pdev->dev, "Failed to remap resource\n");
-		return -ENOMEM;
-	}
+	gptu_membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(gptu_membase))
+		return PTR_ERR(gptu_membase);
 
 	/* enable our clock */
 	clk = clk_get(&pdev->dev, NULL);
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 95681789b51e..910fb4c20b9e 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -214,13 +214,13 @@ static int ltq_pci_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ltq_pci_membase = devm_request_and_ioremap(&pdev->dev, res_bridge);
-	ltq_pci_mapped_cfg = devm_request_and_ioremap(&pdev->dev, res_cfg);
+	ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
+	if (IS_ERR(ltq_pci_membase))
+		return PTR_ERR(ltq_pci_membase);
 
-	if (!ltq_pci_membase || !ltq_pci_mapped_cfg) {
-		dev_err(&pdev->dev, "failed to remap resources\n");
-		return -ENOMEM;
-	}
+	ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
+	if (IS_ERR(ltq_pci_mapped_cfg))
+		return PTR_ERR(ltq_pci_mapped_cfg);
 
 	ltq_pci_startup(pdev);
 
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index 4b2ea282b9c7..4d8705a65e4a 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -13,7 +13,6 @@ config SGI_SN_M_MODE
 
 config SGI_SN_N_MODE
 	bool "IP27 N-Mode"
-	depends on EXPERIMENTAL
 	help
 	  The nodes of Origin, Onyx, Fuel and Tezro systems can be configured
 	  in either N-Modes which allows for more nodes or M-Mode which allows
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index a32e34ecda9e..9f2820659da2 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -192,12 +192,12 @@ config PARISC_PAGE_SIZE_4KB
 	  If you don't know what to do, choose 4KB.
 
 config PARISC_PAGE_SIZE_16KB
-	bool "16KB (EXPERIMENTAL)"
-	depends on PA8X00 && EXPERIMENTAL
+	bool "16KB"
+	depends on PA8X00
 
 config PARISC_PAGE_SIZE_64KB
-	bool "64KB (EXPERIMENTAL)"
-	depends on PA8X00 && EXPERIMENTAL
+	bool "64KB"
+	depends on PA8X00
 
 endchoice
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 561ccca7b1a7..e7fb8edb629b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -332,7 +332,7 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+	depends on SMP && HOTPLUG && (PPC_PSERIES || \
 	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
@@ -354,8 +354,8 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
 config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) && EXPERIMENTAL
+	bool "kexec system call"
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -850,8 +850,8 @@ config LOWMEM_CAM_NUM
 	default 3
 
 config DYNAMIC_MEMSTART
-	bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
+	bool "Enable page aligned dynamic load address for kernel"
+	depends on ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
 	select NONSTATIC_KERNEL
 	help
 	  This option enables the kernel to be loaded at any page aligned
@@ -868,8 +868,8 @@ config DYNAMIC_MEMSTART
 	  This option is overridden by CONFIG_RELOCATABLE
 
 config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
+	bool "Build a relocatable kernel"
+	depends on ADVANCED_OPTIONS && FLATMEM && 44x
 	select NONSTATIC_KERNEL
 	help
 	  This builds a kernel image that is capable of running at the
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 4730c953f435..63c67ec72e43 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -41,7 +41,7 @@ config KVM_BOOK3S_PR
 
 config KVM_BOOK3S_32
 	tristate "KVM support for PowerPC book3s_32 processors"
-	depends on EXPERIMENTAL && PPC_BOOK3S_32 && !SMP && !PTE_64BIT
+	depends on PPC_BOOK3S_32 && !SMP && !PTE_64BIT
 	select KVM
 	select KVM_BOOK3S_32_HANDLER
 	select KVM_BOOK3S_PR
@@ -56,7 +56,7 @@ config KVM_BOOK3S_32
 
 config KVM_BOOK3S_64
 	tristate "KVM support for PowerPC book3s_64 processors"
-	depends on EXPERIMENTAL && PPC_BOOK3S_64
+	depends on PPC_BOOK3S_64
 	select KVM_BOOK3S_64_HANDLER
 	select KVM
 	---help---
@@ -97,7 +97,7 @@ config KVM_BOOKE_HV
 
 config KVM_440
 	bool "KVM support for PowerPC 440 processors"
-	depends on EXPERIMENTAL && 44x
+	depends on 44x
 	select KVM
 	select KVM_MMIO
 	---help---
@@ -122,7 +122,7 @@ config KVM_EXIT_TIMING
 
 config KVM_E500V2
 	bool "KVM support for PowerPC E500v2 processors"
-	depends on EXPERIMENTAL && E500 && !PPC_E500MC
+	depends on E500 && !PPC_E500MC
 	select KVM
 	select KVM_MMIO
 	select MMU_NOTIFIER
@@ -137,7 +137,7 @@ config KVM_E500V2
 
 config KVM_E500MC
 	bool "KVM support for PowerPC E500MC/E5500 processors"
-	depends on EXPERIMENTAL && PPC_E500MC
+	depends on PPC_E500MC
 	select KVM
 	select KVM_MMIO
 	select KVM_BOOKE_HV
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 02d02a09942d..92ab60a62711 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -277,7 +277,6 @@ config P5040_DS
 
 config PPC_QEMU_E500
 	bool "QEMU generic e500 platform"
-	depends on EXPERIMENTAL
 	select DEFAULT_UIMAGE
 	help
 	  This option enables support for running as a QEMU guest using
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 2e7ff0c5cf42..53aaefeb3386 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -124,7 +124,7 @@ config CBE_CPUFREQ
 
 config CBE_CPUFREQ_PMI_ENABLE
 	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ && EXPERIMENTAL
+	depends on CBE_CPUFREQ
 	default n
 	help
 	  Select this, if you want to use the PMI interface
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 46b7f0232523..e87c19473973 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -48,7 +48,7 @@ config PS3_HTAB_SIZE
 	  system will have optimal runtime performance.
 
 config PS3_DYNAMIC_DMA
-	depends on PPC_PS3 && EXPERIMENTAL
+	depends on PPC_PS3
 	bool "PS3 Platform dynamic DMA page table management"
 	default n
 	help
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index c15ba7d1be64..27c91c38d1a1 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -717,8 +717,8 @@ source "arch/s390/kvm/Kconfig"
 
 config S390_GUEST
 	def_bool y
-	prompt "s390 support for virtio devices (EXPERIMENTAL)"
-	depends on 64BIT && EXPERIMENTAL
+	prompt "s390 support for virtio devices"
+	depends on 64BIT
 	select VIRTUALIZATION
 	select VIRTIO
 	select VIRTIO_CONSOLE
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index b58dd869cb32..60f9f8ae0fc8 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -18,7 +18,7 @@ if VIRTUALIZATION
 config KVM
 	def_tristate y
 	prompt "Kernel-based Virtual Machine (KVM) support"
-	depends on HAVE_KVM && EXPERIMENTAL
+	depends on HAVE_KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9c833c585871..87f720037ff7 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -644,7 +644,7 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on SUPERH32 && EXPERIMENTAL && MMU
+	depends on SUPERH32 && MMU
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -661,7 +661,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on SUPERH32 && EXPERIMENTAL && BROKEN_ON_SMP
+	depends on SUPERH32 && BROKEN_ON_SMP
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
@@ -675,7 +675,7 @@ config CRASH_DUMP
 
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
-	depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+	depends on SUPERH32 && KEXEC && HIBERNATION
 	help
 	  Jump between original kernel and kexeced kernel and invoke
 	  code via KEXEC
@@ -709,7 +709,7 @@ config SECCOMP
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on SUPERH32 && EXPERIMENTAL
+	depends on SUPERH32
 	help
 	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
@@ -760,7 +760,7 @@ config NR_CPUS
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on SMP && HOTPLUG
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -839,7 +839,7 @@ config ENTRY_OFFSET
 
 config ROMIMAGE_MMCIF
 	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
-	depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+	depends on CPU_SUBTYPE_SH7724
 	help
 	  Say Y here to include experimental MMCIF loading code in
 	  romImage. With this enabled it is possible to write the romImage
@@ -925,7 +925,6 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL
 
 source "kernel/power/Kconfig"
 
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index 770ff2d5b94d..05b518e90cf7 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -33,7 +33,7 @@ config SH64_FPU_DENORM_FLUSH
 config SH_FPU_EMU
 	def_bool n
 	prompt "FPU emulation support"
-	depends on !SH_FPU && EXPERIMENTAL
+	depends on !SH_FPU
 	help
 	  Selecting this option will enable support for software FPU emulation.
 	  Most SH-3 users will want to say Y here, whereas most SH-4 users will
@@ -68,7 +68,6 @@ config SH_STORE_QUEUES
 
 config SPECULATIVE_EXECUTION
 	bool "Speculative subroutine return"
-	depends on EXPERIMENTAL
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
 	help
 	  This enables support for a speculative instruction fetch for
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 0f7c852f355c..5a43a871e097 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -83,7 +83,7 @@ config 32BIT
 
 config PMB
 	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
+	depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
 	select 32BIT
 	select UNCACHED_MAPPING
 	help
@@ -110,7 +110,7 @@ config VSYSCALL
 
 config NUMA
 	bool "Non Uniform Memory Access (NUMA) Support"
-	depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL
+	depends on MMU && SYS_SUPPORTS_NUMA
 	select ARCH_WANT_NUMA_VARIABLE_LOCALITY
 	default n
 	help
diff --git a/arch/tile/kvm/Kconfig b/arch/tile/kvm/Kconfig
index 669fcdba31ea..2298cb1daff7 100644
--- a/arch/tile/kvm/Kconfig
+++ b/arch/tile/kvm/Kconfig
@@ -18,7 +18,7 @@ if VIRTUALIZATION
 
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
-	depends on HAVE_KVM && MODULES && EXPERIMENTAL
+	depends on HAVE_KVM && MODULES
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	---help---
diff --git a/arch/um/Kconfig.net b/arch/um/Kconfig.net
index 3160b1a5adb7..820a56f00332 100644
--- a/arch/um/Kconfig.net
+++ b/arch/um/Kconfig.net
@@ -157,7 +157,7 @@ config UML_NET_MCAST
 
 config UML_NET_PCAP
 	bool "pcap transport"
-	depends on UML_NET && EXPERIMENTAL
+	depends on UML_NET
 	help
 	The pcap transport makes a pcap packet stream on the host look
 	like an ethernet device inside UML.  This is useful for making
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index bf87f25eb2de..a7520c90f62d 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -45,8 +45,8 @@ config HOSTFS
           say Y or M here; otherwise say N.
 
 config HPPFS
-	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PROC_FS
+	tristate "HoneyPot ProcFS"
+	depends on PROC_FS
 	help
 	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
 	  entries to be overridden, removed, or fabricated from the host.
@@ -96,7 +96,7 @@ config MAGIC_SYSRQ
 	  unless you really know what this hack does.
 
 config SMP
-	bool "Symmetric multi-processing support (EXPERIMENTAL)"
+	bool "Symmetric multi-processing support"
 	default n
 	depends on BROKEN
 	help
@@ -126,7 +126,7 @@ config NR_CPUS
 	default "32"
 
 config HIGHMEM
-	bool "Highmem support (EXPERIMENTAL)"
+	bool "Highmem support"
 	depends on !64BIT && BROKEN
 	default n
 	help
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f7a27fdb5098..63c0431daa3a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -225,7 +225,7 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 
 config HAVE_INTEL_TXT
 	def_bool y
-	depends on EXPERIMENTAL && INTEL_IOMMU && ACPI
+	depends on INTEL_IOMMU && ACPI
 
 config X86_32_SMP
 	def_bool y
@@ -642,7 +642,7 @@ config PARAVIRT
 
 config PARAVIRT_SPINLOCKS
 	bool "Paravirtualization layer for spinlocks"
-	depends on PARAVIRT && SMP && EXPERIMENTAL
+	depends on PARAVIRT && SMP
 	---help---
 	  Paravirtualized spinlocks allow a pvops backend to replace the
 	  spinlock implementation with something virtualization-friendly
@@ -754,7 +754,7 @@ config GART_IOMMU
 config CALGARY_IOMMU
 	bool "IBM Calgary IOMMU support"
 	select SWIOTLB
-	depends on X86_64 && PCI && EXPERIMENTAL
+	depends on X86_64 && PCI
 	---help---
 	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
 	  systems. Needed to run systems with more than 3GB of memory
@@ -796,7 +796,7 @@ config IOMMU_HELPER
 
 config MAXSMP
 	bool "Enable Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
+	depends on X86_64 && SMP && DEBUG_KERNEL
 	select CPUMASK_OFFSTACK
 	---help---
 	  Enable maximum number of CPUS and NUMA Nodes for this architecture.
@@ -1132,7 +1132,6 @@ config HIGHMEM64G
 endchoice
 
 choice
-	depends on EXPERIMENTAL
 	prompt "Memory split" if EXPERT
 	default VMSPLIT_3G
 	depends on X86_32
@@ -1209,7 +1208,7 @@ config DIRECT_GBPAGES
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI))
 	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
@@ -1304,7 +1303,7 @@ config ARCH_DISCONTIGMEM_DEFAULT
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
+	depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
@@ -1618,8 +1617,7 @@ config CRASH_DUMP
 	  For more details see Documentation/kdump/kdump.txt
 
 config KEXEC_JUMP
-	bool "kexec jump (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "kexec jump"
 	depends on KEXEC && HIBERNATION
 	---help---
 	  Jump between original kernel and kexeced kernel and invoke
@@ -2063,7 +2061,7 @@ config PCI_MMCONFIG
 
 config PCI_CNB20LE_QUIRK
 	bool "Read CNB20LE Host Bridge Windows" if EXPERT
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	help
 	  Read the PCI windows out of the CNB20LE host bridge. This allows
 	  PCI hotplug to work on systems with the CNB20LE chipset which do
@@ -2267,8 +2265,8 @@ config IA32_AOUT
 	  Support old a.out binaries in the 32bit emulation.
 
 config X86_X32
-	bool "x32 ABI for 64-bit mode (EXPERIMENTAL)"
-	depends on X86_64 && IA32_EMULATION && EXPERIMENTAL
+	bool "x32 ABI for 64-bit mode"
+	depends on X86_64 && IA32_EMULATION
 	---help---
 	  Include code to run binaries for the x32 native 32-bit ABI
 	  for 64-bit processors.  An x32 process gets access to the
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 53c90fd412d1..21a13ce1d751 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -37,9 +37,8 @@ config RWSEM_GENERIC_SPINLOCK
 	def_bool !RWSEM_XCHGADD_ALGORITHM
 
 config 3_LEVEL_PGTABLES
-	bool "Three-level pagetables (EXPERIMENTAL)" if !64BIT
+	bool "Three-level pagetables" if !64BIT
 	default 64BIT
-	depends on EXPERIMENTAL
 	help
 	Three-level pagetables will let UML have more than 4G of physical
 	memory.  All the memory that can't be mapped directly will be treated