Merge branch 'linus' into tracing/hw-breakpoints

Conflicts:
	arch/x86/Kconfig
	arch/x86/kernel/traps.c
	arch/x86/power/cpu.c
	arch/x86/power/cpu_32.c
	kernel/Makefile

Semantic conflict:
	arch/x86/kernel/hw_breakpoint.c

Merge reason: Resolve the conflicts, move from put_cpu_no_sched() to
              put_cpu() in arch/x86/kernel/hw_breakpoint.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 83 insertions, 30 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3033375ed6bc..52421d52f21e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -47,6 +47,12 @@ config X86
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_HW_BREAKPOINT
+	select HAVE_ARCH_KMEMCHECK
+
+config OUTPUT_FORMAT
+	string
+	default "elf32-i386" if X86_32
+	default "elf64-x86-64" if X86_64
 
 config ARCH_DEFCONFIG
 	string
@@ -275,15 +281,9 @@ config SPARSE_IRQ
 
 	  If you don't know what to do here, say N.
 
-config NUMA_MIGRATE_IRQ_DESC
-	bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+	def_bool y
 	depends on SPARSE_IRQ && NUMA
-	depends on BROKEN
-	default n
-	---help---
-	  This enables moving irq_desc to cpu/node that irq will use handled.
-
-	  If you don't know what to do here, say N.
 
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
@@ -356,7 +356,7 @@ config X86_UV
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
 	depends on NUMA
-	select X86_X2APIC
+	depends on X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
@@ -499,6 +499,19 @@ config PARAVIRT
 	  over full virtualization.  However, when run without a hypervisor
 	  the kernel is theoretically slower and slightly larger.
 
+config PARAVIRT_SPINLOCKS
+	bool "Paravirtualization layer for spinlocks"
+	depends on PARAVIRT && SMP && EXPERIMENTAL
+	---help---
+	  Paravirtualized spinlocks allow a pvops backend to replace the
+	  spinlock implementation with something virtualization-friendly
+	  (for example, block the virtual CPU rather than spinning).
+
+	  Unfortunately the downside is an up to 5% performance hit on
+	  native kernels, with various workloads.
+
+	  If you are unsure how to answer this question, answer N.
+
 config PARAVIRT_CLOCK
 	bool
 	default n
@@ -728,6 +741,7 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
+	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 
 config X86_IO_APIC
 	def_bool y
@@ -777,10 +791,26 @@ config X86_MCE
 	  to disable it.  MCE support simply ignores non-MCE processors like
 	  the 386 and 486, so nearly everyone can say Y here.
 
+config X86_OLD_MCE
+	depends on X86_32 && X86_MCE
+	bool "Use legacy machine check code (will go away)"
+	default n
+	select X86_ANCIENT_MCE
+	---help---
+	  Use the old i386 machine check code. This is merely intended for
+	  testing in a transition period. Try this if you run into any machine
+	  check related software problems, but report the problem to
+	  linux-kernel.  When in doubt say no.
+
+config X86_NEW_MCE
+	depends on X86_MCE
+	bool
+	default y if (!X86_OLD_MCE && X86_32) || X86_64
+
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -788,19 +818,36 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	depends on X86_NEW_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
+config X86_ANCIENT_MCE
+	def_bool n
+	depends on X86_32
+	prompt "Support for old Pentium 5 / WinChip machine checks"
+	---help---
+	  Include support for machine check handling on old Pentium 5 or WinChip
+	  systems. These typically need to be enabled explicitely on the command
+	  line.
+
 config X86_MCE_THRESHOLD
 	depends on X86_MCE_AMD || X86_MCE_INTEL
 	bool
 	default y
 
+config X86_MCE_INJECT
+	depends on X86_NEW_MCE
+	tristate "Machine check injector support"
+	---help---
+	  Provide support for injecting machine checks for testing purposes.
+	  If you don't know what a machine check is and you don't do kernel
+	  QA it is safe to say n.
+
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_32 && X86_MCE
+	depends on X86_OLD_MCE
 	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
@@ -813,11 +860,15 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
+	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
 	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
+config X86_THERMAL_VECTOR
+	def_bool y
+	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
@@ -1454,9 +1505,7 @@ config KEXEC_JUMP
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x1000000" if X86_NUMAQ
-	default "0x200000" if X86_64
-	default "0x100000"
+	default "0x1000000"
 	---help---
 	  This gives the physical address where the kernel is loaded.
 
@@ -1475,15 +1524,15 @@ config PHYSICAL_START
 	  to be specifically compiled to run from a specific memory area
 	  (normally a reserved region) and this option comes handy.
 
-	  So if you are using bzImage for capturing the crash dump, leave
-	  the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
-	  Otherwise if you plan to use vmlinux for capturing the crash dump
-	  change this value to start of the reserved region (Typically 16MB
-	  0x1000000). In other words, it can be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
+	  So if you are using bzImage for capturing the crash dump,
+	  leave the value here unchanged to 0x1000000 and set
+	  CONFIG_RELOCATABLE=y.  Otherwise if you plan to use vmlinux
+	  for capturing the crash dump change this value to start of
+	  the reserved region.  In other words, it can be set based on
+	  the "X" value as specified in the "crashkernel=YM@XM"
+	  command line boot parameter passed to the panic-ed
+	  kernel. Please take a look at Documentation/kdump/kdump.txt
+	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as
 	  one does not have to build two kernels. Same kernel can be used
@@ -1496,8 +1545,8 @@ config PHYSICAL_START
 	  Don't change this unless you know what you are doing.
 
 config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Build a relocatable kernel"
+	default y
 	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -1512,12 +1561,16 @@ config RELOCATABLE
 	  it has been loaded at and the compile time physical address
 	  (CONFIG_PHYSICAL_START) is ignored.
 
+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+	def_bool y
+	depends on X86_32 && RELOCATABLE
+
 config PHYSICAL_ALIGN
 	hex
 	prompt "Alignment value to which kernel should be aligned" if X86_32
-	default "0x100000" if X86_32
-	default "0x200000" if X86_64
-	range 0x2000 0x400000
+	default "0x1000000"
+	range 0x2000 0x1000000
 	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an