Merge branch 'imx/board' into next/boards

* imx/board: (4 commits)
  Enable 32 bit flash support for iMX21ADS board
  ARM: mx31pdk: Add MC13783 RTC support
  iomux-mx25: configuration to support CSPI3 on CSI pins
  MX1:apf9328: Add i2c support

Updated to v3.2-rc6, conflicts:
	arch/arm/kernel/setup.c

21 files changed, 141 insertions, 81 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index abba5b8c9d74..a02385b2444c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
 	  be avoided when possible.
 
 config PHYS_OFFSET
-	hex "Physical address of main memory"
+	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	default DRAM_BASE if !MMU
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192197c8..fccb4703bacb 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -67,7 +67,6 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index a5edf421005c..d1c3f3a71c94 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -30,14 +30,15 @@ enum unwind_reason_code {
 };
 
 struct unwind_idx {
-	unsigned long addr;
+	unsigned long addr_offset;
 	unsigned long insn;
 };
 
 struct unwind_table {
 	struct list_head list;
-	struct unwind_idx *start;
-	struct unwind_idx *stop;
+	const struct unwind_idx *start;
+	const struct unwind_idx *origin;
+	const struct unwind_idx *stop;
 	unsigned long begin_addr;
 	unsigned long end_addr;
 };
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
 
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
-	return 0;
-}
-#endif
-
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index a4f192cc51b2..5bb91bf3d47f 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -639,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
 
 static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
+	if (!cpu_pmu)
+		return -ENODEV;
+
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 5c7094e8f6e9..095d6611c84e 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -902,8 +902,6 @@ void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
 
-	unwind_init();
-
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
@@ -911,6 +909,12 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 	if (mdesc->restart_mode)
 		reboot_setup(&mdesc->restart_mode);
 
@@ -945,12 +949,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index e7e8365795c3..00df012c4678 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
-	unsigned long *insn;		/* pointer to the current instructions word */
+	const unsigned long *insn;	/* pointer to the current instructions word */
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -83,8 +83,9 @@ enum regs {
 	PC = 15
 };
 
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
 
 static DEFINE_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
 })
 
 /*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
  * guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
  */
-static struct unwind_idx *search_index(unsigned long addr,
-				       struct unwind_idx *first,
-				       struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+				       const struct unwind_idx *start,
+				       const struct unwind_idx *origin,
+				       const struct unwind_idx *stop)
 {
-	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+	unsigned long addr_prel31;
+
+	pr_debug("%s(%08lx, %p, %p, %p)\n",
+			__func__, addr, start, origin, stop);
+
+	/*
+	 * only search in the section with the matching sign. This way the
+	 * prel31 numbers can be compared as unsigned longs.
+	 */
+	if (addr < (unsigned long)start)
+		/* negative offsets: [start; origin) */
+		stop = origin;
+	else
+		/* positive offsets: [origin; stop) */
+		start = origin;
+
+	/* prel31 for address relavive to start */
+	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
 
-	if (addr < first->addr) {
+	while (start < stop - 1) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		/*
+		 * As addr_prel31 is relative to start an offset is needed to
+		 * make it relative to mid.
+		 */
+		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+				mid->addr_offset)
+			stop = mid;
+		else {
+			/* keep addr_prel31 relative to start */
+			addr_prel31 -= ((unsigned long)mid -
+					(unsigned long)start);
+			start = mid;
+		}
+	}
+
+	if (likely(start->addr_offset <= addr_prel31))
+		return start;
+	else {
 		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
 		return NULL;
-	} else if (addr >= last->addr)
-		return last;
+	}
+}
 
-	while (first < last - 1) {
-		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+static const struct unwind_idx *unwind_find_origin(
+		const struct unwind_idx *start, const struct unwind_idx *stop)
+{
+	pr_debug("%s(%p, %p)\n", __func__, start, stop);
+	while (start < stop) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
 
-		if (addr < mid->addr)
-			last = mid;
+		if (mid->addr_offset >= 0x40000000)
+			/* negative offset */
+			start = mid + 1;
 		else
-			first = mid;
+			/* positive offset */
+			stop = mid;
 	}
-
-	return first;
+	pr_debug("%s -> %p\n", __func__, stop);
+	return stop;
 }
 
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 {
-	struct unwind_idx *idx = NULL;
+	const struct unwind_idx *idx = NULL;
 	unsigned long flags;
 
 	pr_debug("%s(%08lx)\n", __func__, addr);
 
-	if (core_kernel_text(addr))
+	if (core_kernel_text(addr)) {
+		if (unlikely(!__origin_unwind_idx))
+			__origin_unwind_idx =
+				unwind_find_origin(__start_unwind_idx,
+						__stop_unwind_idx);
+
 		/* main unwind table */
 		idx = search_index(addr, __start_unwind_idx,
-				   __stop_unwind_idx - 1);
-	else {
+				   __origin_unwind_idx,
+				   __stop_unwind_idx);
+	} else {
 		/* module unwind tables */
 		struct unwind_table *table;
 
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
-						   table->stop - 1);
+						   table->origin,
+						   table->stop);
 				/* Move-to-front to exploit common traces */
 				list_move(&table->list, &unwind_tables);
 				break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 int unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
-	struct unwind_idx *idx;
+	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
 	/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 				      unsigned long text_size)
 {
 	unsigned long flags;
-	struct unwind_idx *idx;
 	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
 
 	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	if (!tab)
 		return tab;
 
-	tab->start = (struct unwind_idx *)start;
-	tab->stop = (struct unwind_idx *)(start + size);
+	tab->start = (const struct unwind_idx *)start;
+	tab->stop = (const struct unwind_idx *)(start + size);
+	tab->origin = unwind_find_origin(tab->start, tab->stop);
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	/* Convert the symbol addresses to absolute values */
-	for (idx = tab->start; idx < tab->stop; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
 	spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
 	spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
 
 	kfree(tab);
 }
-
-int __init unwind_init(void)
-{
-	struct unwind_idx *idx;
-
-	/* Convert the symbol addresses to absolute values */
-	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
-	pr_debug("unwind: ARM stack unwinding initialised\n");
-
-	return 0;
-}
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df8f132..85b5527d0918 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c44aa974e79c..d0a27303edb8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -98,6 +98,7 @@ config MACH_SCB9328
 config MACH_APF9328
 	bool "APF9328"
 	select SOC_IMX1
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 1e486e67dabb..c71dbcc37b11 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/dm9000.h>
+#include <linux/i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +42,9 @@ static const int apf9328_pins[] __initconst = {
 	PB29_PF_UART2_RTS,
 	PB30_PF_UART2_TXD,
 	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
 };
 
 /*
@@ -103,6 +107,10 @@ static const struct imxuart_platform_data uart1_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&apf9328_flash_device,
 	&dm9000x_device,
@@ -119,6 +127,8 @@ static void __init apf9328_init(void)
 	imx1_add_imx_uart0(NULL);
 	imx1_add_imx_uart1(&uart1_pdata);
 
+	imx1_add_imx_i2c(&apf9328_i2c_data);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b8c54b840185..00bb308ce1cd 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -492,7 +492,7 @@ static struct mc13xxx_platform_data mc13783_pdata = {
 		.regulators = mx31_3ds_regulators,
 		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
 	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN,
+	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
 };
 
 /* SPI */
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5c837603ff0f..24994bb52147 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
 
 	imx51_soc_init();
 
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31ab8f85..64bbfcea6f35 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
 	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f7734db6..237bdecd9331 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
 	gpio_set_value(LOCO_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845eb4a6..d42132a80e8f 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e9eff00cddd4..d67bcdf724d7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -198,7 +198,7 @@ static struct platform_device rx51_charger_device = {
 static void __init rx51_charger_init(void)
 {
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
 	platform_device_register(&rx51_charger_device);
 }
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 292eee3be15f..28fcb27005d2 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->reg_size = 4;
 		pdata->has_ccr = true;
 	}
+	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+	if (id == 1)
+		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
@@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 	omap_mcbsp_count++;
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 4ca77c41d499..3ac9e57d9705 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -274,6 +274,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
 
 static struct platform_pwm_backlight_data smdkv210_bl_data = {
 	.pwm_id = 3,
+	.pwm_period_ns = 1000,
 };
 
 static void __init smdkv210_map_io(void)
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 74aac96cda20..adbff706ef6f 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -17,6 +17,7 @@
  * the CPU clock speed on the fly.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index bf64e1e594ed..f0726d48df22 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -265,16 +265,20 @@
 #define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__CSPI3_MOSI	IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__CSPI3_MISO	IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__CSPI3_SCLK	IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__CSPI3_RDY	IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea59084..845de59f07ed 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,9 @@
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
@@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 
-		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index e657305644cc..a976c023b286 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/pwm_backlight.h>
-#include <linux/slab.h>
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>