ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

ARMv6 and greater introduced a new instruction ("bx") which can be used
to return from function calls.  Recent CPUs perform better when the
"bx lr" instruction is used rather than the "mov pc, lr" instruction,
and this sequence is strongly recommended to be used by the ARM
architecture manual (section A.4.1.1).

We provide a new macro "ret" with all its variants for the condition
code which will resolve to the appropriate instruction.

Rather than doing this piecemeal, and miss some instances, change all
the "mov pc" instances to use the new macro, with the exception of
the "movs" instruction and the kprobes code.  This allows us to detect
the "mov pc, lr" case and fix it up - and also gives us the possibility
of deploying this for other registers depending on the CPU selection.

Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S
Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385
Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M
Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index d8fd4d4bd3d4..24659952c278 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -51,7 +51,7 @@ ENTRY(v6_flush_icache_all)
 #else
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
 #endif
-	mov	pc, lr
+	ret	lr
 ENDPROC(v6_flush_icache_all)
 
 /*
@@ -73,7 +73,7 @@ ENTRY(v6_flush_kern_cache_all)
 #else
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
 #endif
-	mov	pc, lr
+	ret	lr
 
 /*
  *	v6_flush_cache_all()
@@ -98,7 +98,7 @@ ENTRY(v6_flush_user_cache_all)
  *	- we have a VIPT cache.
  */
 ENTRY(v6_flush_user_cache_range)
-	mov	pc, lr
+	ret	lr
 
 /*
  *	v6_coherent_kern_range(start,end)
@@ -150,7 +150,7 @@ ENTRY(v6_coherent_user_range)
 #else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
 #endif
-	mov	pc, lr
+	ret	lr
 
 /*
  * Fault handling for the cache operation above. If the virtual address in r0
@@ -158,7 +158,7 @@ ENTRY(v6_coherent_user_range)
  */
 9001:
 	mov	r0, #-EFAULT
-	mov	pc, lr
+	ret	lr
  UNWIND(.fnend		)
 ENDPROC(v6_coherent_user_range)
 ENDPROC(v6_coherent_kern_range)
@@ -188,7 +188,7 @@ ENTRY(v6_flush_kern_dcache_area)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4
 #endif
-	mov	pc, lr
+	ret	lr
 
 
 /*
@@ -239,7 +239,7 @@ v6_dma_inv_range:
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	v6_dma_clean_range(start,end)
@@ -262,7 +262,7 @@ v6_dma_clean_range:
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	v6_dma_flush_range(start,end)
@@ -290,7 +290,7 @@ ENTRY(v6_dma_flush_range)
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_map_area(start, size, dir)
@@ -323,7 +323,7 @@ ENTRY(v6_dma_unmap_area)
 	teq	r2, #DMA_TO_DEVICE
 	bne	v6_dma_inv_range
 #endif
-	mov	pc, lr
+	ret	lr
 ENDPROC(v6_dma_unmap_area)
 
 	.globl	v6_flush_kern_cache_louis