mach-ux500: delete old keypad board file

We register keypads per-UIB now, remove this.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 0 insertions, 230 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index ef67952ed420..1cb588efec82 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,7 +7,6 @@ obj-y				:= clock.o cpu.o devices.o devices-common.o \
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
 obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
-				board-mop500-keypads.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
deleted file mode 100644
index 70318c354d32..000000000000
--- a/arch/arm/mach-ux500/board-mop500-keypads.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Keypad layouts for various boards
- */
-
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include <plat/pincfg.h>
-#include <plat/ske.h>
-
-#include <mach/devices.h>
-#include <mach/hardware.h>
-
-#include "devices-db8500.h"
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0      164
-#define ROW_PIN_I1      163
-#define ROW_PIN_I2      162
-#define ROW_PIN_I3      161
-#define ROW_PIN_I4      156
-#define ROW_PIN_I5      155
-#define ROW_PIN_I6      154
-#define ROW_PIN_I7      153
-#define COL_PIN_O0      168
-#define COL_PIN_O1      167
-#define COL_PIN_O2      166
-#define COL_PIN_O3      165
-#define COL_PIN_O4      160
-#define COL_PIN_O5      159
-#define COL_PIN_O6      158
-#define COL_PIN_O7      157
-
-#define SKE_KPD_MAX_ROWS	8
-#define SKE_KPD_MAX_COLS	8
-
-static int ske_kp_rows[] = {
-	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
-	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
-};
-
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
-{
-	int ret;
-
-	ret = gpio_request(gpio, "ske-kp");
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio request failed\n");
-		return ret;
-	}
-
-	ret = gpio_direction_output(gpio, 1);
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio direction failed\n");
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
-{
-	int ret, i;
-
-	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
-		ret = ske_set_gpio_row(ske_kp_rows[i]);
-		if (ret < 0) {
-			pr_err("ske_kp_init: failed init\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct ske_keypad_platform_data ske_keypad_board = {
-	.init		= ske_kp_init,
-	.keymap_data    = &mop500_keymap_data,
-	.no_autorepeat  = true,
-	.krow		= SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
-	.kcol		= SKE_KPD_MAX_COLS,
-	.debounce_ms    = 40,			/* in millisecs */
-};
-
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id             = 1,
-	.blocks         = STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad         = &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * TC35893
- */
-
-static const unsigned int uib_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data uib_keymap_data = {
-	.keymap         = uib_keymap,
-	.keymap_size    = ARRAY_SIZE(uib_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &uib_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info mop500_i2c0_devices_uib[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-void mop500_keypad_init(void)
-{
-	db8500_add_ske_keypad(&ske_keypad_board);
-
-	i2c_register_board_info(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	i2c_register_board_info(0, mop500_i2c0_devices_uib,
-			ARRAY_SIZE(mop500_i2c0_devices_uib));
-
-}