omap3: Add CompuLab CM-T35 board support

This patch adds basic support for CompuLab CM-T35 module.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

3 files changed, 513 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0d14dde68cd4..fa2099624603 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -101,6 +101,10 @@ config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_CM_T35
+	bool "CompuLab CM-T35 module"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d56fb2b19195..1b37f2a1cc0c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -83,6 +83,8 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
+					   mmc-twl4030.o
 
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
new file mode 100644
index 000000000000..22c45290db63
--- /dev/null
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -0,0 +1,507 @@
+/*
+ * board-cm-t35.c (CompuLab CM-T35 module)
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/at24.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/mux.h>
+#include <plat/nand.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include <mach/hardware.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define CM_T35_GPIO_PENDOWN	57
+
+#define CM_T35_SMSC911X_CS	5
+#define CM_T35_SMSC911X_GPIO	163
+#define SB_T35_SMSC911X_CS	4
+#define SB_T35_SMSC911X_GPIO	65
+
+#define NAND_BLOCK_SIZE		SZ_128K
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config cm_t35_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource cm_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device cm_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cm_t35_smsc911x_resources),
+	.resource	= cm_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static struct resource sb_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sb_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sb_t35_smsc911x_resources),
+	.resource	= sb_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static void __init cm_t35_init_smsc911x(struct platform_device *dev,
+					int cs, int irq_gpio)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	dev->resource[0].start = cs_mem_base + 0x0;
+	dev->resource[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(irq_gpio, "ETH IRQ") == 0) &&
+	    (gpio_direction_input(irq_gpio) == 0)) {
+		gpio_export(irq_gpio, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(dev);
+}
+
+static void __init cm_t35_init_ethernet(void)
+{
+	cm_t35_init_smsc911x(&cm_t35_smsc911x_device,
+			     CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO);
+	cm_t35_init_smsc911x(&sb_t35_smsc911x_device,
+			     SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO);
+}
+#else
+static inline void __init cm_t35_init_ethernet(void) { return; }
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led cm_t35_leds[] = {
+	[0] = {
+		.gpio			= 186,
+		.name			= "cm-t35:green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data cm_t35_led_pdata = {
+	.num_leds	= ARRAY_SIZE(cm_t35_leds),
+	.leds		= cm_t35_leds,
+};
+
+static struct platform_device cm_t35_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &cm_t35_led_pdata,
+	},
+};
+
+static void __init cm_t35_init_led(void)
+{
+	platform_device_register(&cm_t35_led_device);
+}
+#else
+static inline void cm_t35_init_led(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_partition cm_t35_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 15 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data cm_t35_nand_data = {
+	.parts			= cm_t35_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
+	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
+	.cs			= 0,
+	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
+	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
+
+};
+
+static struct resource cm_t35_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cm_t35_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &cm_t35_nand_resource,
+	.dev		= {
+		.platform_data	= &cm_t35_nand_data,
+	},
+};
+
+static void __init cm_t35_init_nand(void)
+{
+	if (platform_device_register(&cm_t35_nand_device) < 0)
+		pr_err("CM-T35: Unable to register NAND device\n");
+}
+#else
+static inline void cm_t35_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <plat/mcspi.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(CM_T35_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info cm_t35_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init cm_t35_init_ads7846(void)
+{
+	if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) {
+		gpio_export(CM_T35_GPIO_PENDOWN, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(cm_t35_spi_board_info,
+				ARRAY_SIZE(cm_t35_spi_board_info));
+}
+#else
+static inline void cm_t35_init_ads7846(void) {}
+#endif
+
+static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply cm_t35_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data cm_t35_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data cm_t35_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vsim_supply,
+};
+
+static struct twl4030_usb_data cm_t35_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int cm_t35_keymap[] = {
+	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
+	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
+	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data cm_t35_keymap_data = {
+	.keymap			= cm_t35_keymap,
+	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
+};
+
+static struct twl4030_keypad_data cm_t35_kp_data = {
+	.keymap_data	= &cm_t35_keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+	.rep		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.transceiver	= 1,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
+				 unsigned ngpio)
+{
+	int wlan_rst = gpio + 2;
+
+	if ((gpio_request(wlan_rst, "WLAN RST") == 0) &&
+	    (gpio_direction_output(wlan_rst, 1) == 0)) {
+		gpio_export(wlan_rst, 0);
+
+		udelay(10);
+		gpio_set_value(wlan_rst, 0);
+		udelay(10);
+		gpio_set_value(wlan_rst, 1);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
+	}
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	cm_t35_vmmc1_supply.dev = mmc[0].dev;
+	cm_t35_vsim_supply.dev = mmc[0].dev;
+
+	/* setup USB with proper PHY reset GPIOs */
+	ehci_pdata.reset_gpio_port[0] = gpio + 6;
+	ehci_pdata.reset_gpio_port[1] = gpio + 7;
+
+	usb_ehci_init(&ehci_pdata);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup          = cm_t35_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data cm_t35_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &cm_t35_kp_data,
+	.usb		= &cm_t35_usb_data,
+	.gpio		= &cm_t35_gpio_data,
+	.vmmc1		= &cm_t35_vmmc1,
+	.vsim		= &cm_t35_vsim,
+};
+
+static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tps65930", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &cm_t35_twldata,
+	},
+};
+
+static void __init cm_t35_init_i2c(void)
+{
+	omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo,
+			      ARRAY_SIZE(cm_t35_i2c_boardinfo));
+}
+
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
+static void __init cm_t35_init_irq(void)
+{
+	omap_board_config = cm_t35_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
+
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init cm_t35_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static void __init cm_t35_init(void)
+{
+	omap_serial_init();
+	cm_t35_init_i2c();
+	cm_t35_init_nand();
+	cm_t35_init_ads7846();
+	cm_t35_init_ethernet();
+	cm_t35_init_led();
+
+	usb_musb_init();
+
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ);
+}
+
+MACHINE_START(CM_T35, "Compulab CM-T35")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= cm_t35_map_io,
+	.init_irq	= cm_t35_init_irq,
+	.init_machine	= cm_t35_init,
+	.timer		= &omap_timer,
+MACHINE_END